blob: ddbe5a9e713dfba93218ad886e5df1f49b9fd19c [file] [log] [blame]
David S. Miller6b8c90f2008-08-29 21:05:15 -07001/* envctrl.c: Temperature and Fan monitoring on Machines providing it.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002 *
3 * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
4 * Copyright (C) 2000 Vinh Truong (vinh.truong@eng.sun.com)
5 * VT - The implementation is to support Sun Microelectronics (SME) platform
6 * environment monitoring. SME platforms use pcf8584 as the i2c bus
7 * controller to access pcf8591 (8-bit A/D and D/A converter) and
8 * pcf8571 (256 x 8-bit static low-voltage RAM with I2C-bus interface).
9 * At board level, it follows SME Firmware I2C Specification. Reference:
10 * http://www-eu2.semiconductors.com/pip/PCF8584P
11 * http://www-eu2.semiconductors.com/pip/PCF8574AP
12 * http://www-eu2.semiconductors.com/pip/PCF8591P
13 *
14 * EB - Added support for CP1500 Global Address and PS/Voltage monitoring.
15 * Eric Brower <ebrower@usa.net>
16 *
17 * DB - Audit every copy_to_user in envctrl_read.
18 * Daniele Bellucci <bellucda@tiscali.it>
19 */
20
Linus Torvalds1da177e2005-04-16 15:20:36 -070021#include <linux/module.h>
Al Viro1baaf0b2006-10-12 19:07:59 +010022#include <linux/init.h>
Christoph Hellwig218b29e2005-08-09 12:30:07 -070023#include <linux/kthread.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070024#include <linux/delay.h>
25#include <linux/ioport.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070026#include <linux/miscdevice.h>
David S. Miller872ec642006-10-17 19:19:08 -070027#include <linux/kmod.h>
Jeremy Fitzhardinge10a0a8d2007-07-17 18:37:02 -070028#include <linux/reboot.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090029#include <linux/slab.h>
David S. Miller6b8c90f2008-08-29 21:05:15 -070030#include <linux/of.h>
31#include <linux/of_device.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070032
Linus Torvalds1da177e2005-04-16 15:20:36 -070033#include <asm/uaccess.h>
34#include <asm/envctrl.h>
David S. Millere1a39fb2007-05-11 16:34:35 -070035#include <asm/io.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070036
David S. Miller6b8c90f2008-08-29 21:05:15 -070037#define DRIVER_NAME "envctrl"
38#define PFX DRIVER_NAME ": "
39
Linus Torvalds1da177e2005-04-16 15:20:36 -070040#define ENVCTRL_MINOR 162
41
42#define PCF8584_ADDRESS 0x55
43
44#define CONTROL_PIN 0x80
45#define CONTROL_ES0 0x40
46#define CONTROL_ES1 0x20
47#define CONTROL_ES2 0x10
48#define CONTROL_ENI 0x08
49#define CONTROL_STA 0x04
50#define CONTROL_STO 0x02
51#define CONTROL_ACK 0x01
52
53#define STATUS_PIN 0x80
54#define STATUS_STS 0x20
55#define STATUS_BER 0x10
56#define STATUS_LRB 0x08
57#define STATUS_AD0 0x08
58#define STATUS_AAB 0x04
59#define STATUS_LAB 0x02
60#define STATUS_BB 0x01
61
62/*
63 * CLK Mode Register.
64 */
65#define BUS_CLK_90 0x00
66#define BUS_CLK_45 0x01
67#define BUS_CLK_11 0x02
68#define BUS_CLK_1_5 0x03
69
70#define CLK_3 0x00
71#define CLK_4_43 0x10
72#define CLK_6 0x14
73#define CLK_8 0x18
74#define CLK_12 0x1c
75
76#define OBD_SEND_START 0xc5 /* value to generate I2c_bus START condition */
77#define OBD_SEND_STOP 0xc3 /* value to generate I2c_bus STOP condition */
78
79/* Monitor type of i2c child device.
80 * Firmware definitions.
81 */
82#define PCF8584_MAX_CHANNELS 8
83#define PCF8584_GLOBALADDR_TYPE 6 /* global address monitor */
84#define PCF8584_FANSTAT_TYPE 3 /* fan status monitor */
85#define PCF8584_VOLTAGE_TYPE 2 /* voltage monitor */
86#define PCF8584_TEMP_TYPE 1 /* temperature monitor*/
87
88/* Monitor type of i2c child device.
89 * Driver definitions.
90 */
91#define ENVCTRL_NOMON 0
92#define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */
93#define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */
94#define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */
André Goddard Rosaaf901ca2009-11-14 13:09:05 -020095#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */
Linus Torvalds1da177e2005-04-16 15:20:36 -070096 /* monitor */
97#define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */
98#define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */
André Goddard Rosaaf901ca2009-11-14 13:09:05 -020099#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100#define ENVCTRL_GLOBALADDR_MON 8 /* global address */
101
102/* Child device type.
103 * Driver definitions.
104 */
105#define I2C_ADC 0 /* pcf8591 */
106#define I2C_GPIO 1 /* pcf8571 */
107
108/* Data read from child device may need to decode
109 * through a data table and a scale.
110 * Translation type as defined by firmware.
111 */
112#define ENVCTRL_TRANSLATE_NO 0
113#define ENVCTRL_TRANSLATE_PARTIAL 1
114#define ENVCTRL_TRANSLATE_COMBINED 2
115#define ENVCTRL_TRANSLATE_FULL 3 /* table[data] */
116#define ENVCTRL_TRANSLATE_SCALE 4 /* table[data]/scale */
117
118/* Driver miscellaneous definitions. */
119#define ENVCTRL_MAX_CPU 4
120#define CHANNEL_DESC_SZ 256
121
122/* Mask values for combined GlobalAddress/PowerStatus node */
123#define ENVCTRL_GLOBALADDR_ADDR_MASK 0x1F
124#define ENVCTRL_GLOBALADDR_PSTAT_MASK 0x60
125
126/* Node 0x70 ignored on CompactPCI CP1400/1500 platforms
127 * (see envctrl_init_i2c_child)
128 */
129#define ENVCTRL_CPCI_IGNORED_NODE 0x70
130
131#define PCF8584_DATA 0x00
132#define PCF8584_CSR 0x01
133
134/* Each child device can be monitored by up to PCF8584_MAX_CHANNELS.
135 * Property of a port or channel as defined by the firmware.
136 */
137struct pcf8584_channel {
138 unsigned char chnl_no;
139 unsigned char io_direction;
140 unsigned char type;
141 unsigned char last;
142};
143
144/* Each child device may have one or more tables of bytes to help decode
145 * data. Table property as defined by the firmware.
146 */
147struct pcf8584_tblprop {
148 unsigned int type;
149 unsigned int scale;
150 unsigned int offset; /* offset from the beginning of the table */
151 unsigned int size;
152};
153
154/* i2c child */
155struct i2c_child_t {
156 /* Either ADC or GPIO. */
157 unsigned char i2ctype;
158 unsigned long addr;
159 struct pcf8584_channel chnl_array[PCF8584_MAX_CHANNELS];
160
161 /* Channel info. */
162 unsigned int total_chnls; /* Number of monitor channels. */
163 unsigned char fan_mask; /* Byte mask for fan status channels. */
164 unsigned char voltage_mask; /* Byte mask for voltage status channels. */
165 struct pcf8584_tblprop tblprop_array[PCF8584_MAX_CHANNELS];
166
167 /* Properties of all monitor channels. */
168 unsigned int total_tbls; /* Number of monitor tables. */
169 char *tables; /* Pointer to table(s). */
170 char chnls_desc[CHANNEL_DESC_SZ]; /* Channel description. */
171 char mon_type[PCF8584_MAX_CHANNELS];
172};
173
174static void __iomem *i2c;
175static struct i2c_child_t i2c_childlist[ENVCTRL_MAX_CPU*2];
176static unsigned char chnls_mask[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
177static unsigned int warning_temperature = 0;
178static unsigned int shutdown_temperature = 0;
179static char read_cpu;
180
181/* Forward declarations. */
182static struct i2c_child_t *envctrl_get_i2c_child(unsigned char);
183
184/* Function Description: Test the PIN bit (Pending Interrupt Not)
185 * to test when serial transmission is completed .
186 * Return : None.
187 */
188static void envtrl_i2c_test_pin(void)
189{
190 int limit = 1000000;
191
192 while (--limit > 0) {
193 if (!(readb(i2c + PCF8584_CSR) & STATUS_PIN))
194 break;
195 udelay(1);
196 }
197
198 if (limit <= 0)
David S. Miller6b8c90f2008-08-29 21:05:15 -0700199 printk(KERN_INFO PFX "Pin status will not clear.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200}
201
202/* Function Description: Test busy bit.
203 * Return : None.
204 */
205static void envctrl_i2c_test_bb(void)
206{
207 int limit = 1000000;
208
209 while (--limit > 0) {
210 /* Busy bit 0 means busy. */
211 if (readb(i2c + PCF8584_CSR) & STATUS_BB)
212 break;
213 udelay(1);
214 }
215
216 if (limit <= 0)
David S. Miller6b8c90f2008-08-29 21:05:15 -0700217 printk(KERN_INFO PFX "Busy bit will not clear.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218}
219
220/* Function Description: Send the address for a read access.
221 * Return : 0 if not acknowledged, otherwise acknowledged.
222 */
223static int envctrl_i2c_read_addr(unsigned char addr)
224{
225 envctrl_i2c_test_bb();
226
227 /* Load address. */
228 writeb(addr + 1, i2c + PCF8584_DATA);
229
230 envctrl_i2c_test_bb();
231
232 writeb(OBD_SEND_START, i2c + PCF8584_CSR);
233
234 /* Wait for PIN. */
235 envtrl_i2c_test_pin();
236
237 /* CSR 0 means acknowledged. */
238 if (!(readb(i2c + PCF8584_CSR) & STATUS_LRB)) {
239 return readb(i2c + PCF8584_DATA);
240 } else {
241 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR);
242 return 0;
243 }
244}
245
246/* Function Description: Send the address for write mode.
247 * Return : None.
248 */
249static void envctrl_i2c_write_addr(unsigned char addr)
250{
251 envctrl_i2c_test_bb();
252 writeb(addr, i2c + PCF8584_DATA);
253
254 /* Generate Start condition. */
255 writeb(OBD_SEND_START, i2c + PCF8584_CSR);
256}
257
258/* Function Description: Read 1 byte of data from addr
259 * set by envctrl_i2c_read_addr()
260 * Return : Data from address set by envctrl_i2c_read_addr().
261 */
262static unsigned char envctrl_i2c_read_data(void)
263{
264 envtrl_i2c_test_pin();
265 writeb(CONTROL_ES0, i2c + PCF8584_CSR); /* Send neg ack. */
266 return readb(i2c + PCF8584_DATA);
267}
268
269/* Function Description: Instruct the device which port to read data from.
270 * Return : None.
271 */
272static void envctrl_i2c_write_data(unsigned char port)
273{
274 envtrl_i2c_test_pin();
275 writeb(port, i2c + PCF8584_DATA);
276}
277
278/* Function Description: Generate Stop condition after last byte is sent.
279 * Return : None.
280 */
281static void envctrl_i2c_stop(void)
282{
283 envtrl_i2c_test_pin();
284 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR);
285}
286
287/* Function Description: Read adc device.
288 * Return : Data at address and port.
289 */
290static unsigned char envctrl_i2c_read_8591(unsigned char addr, unsigned char port)
291{
292 /* Send address. */
293 envctrl_i2c_write_addr(addr);
294
295 /* Setup port to read. */
296 envctrl_i2c_write_data(port);
297 envctrl_i2c_stop();
298
299 /* Read port. */
300 envctrl_i2c_read_addr(addr);
301
302 /* Do a single byte read and send stop. */
303 envctrl_i2c_read_data();
304 envctrl_i2c_stop();
305
306 return readb(i2c + PCF8584_DATA);
307}
308
309/* Function Description: Read gpio device.
310 * Return : Data at address.
311 */
312static unsigned char envctrl_i2c_read_8574(unsigned char addr)
313{
314 unsigned char rd;
315
316 envctrl_i2c_read_addr(addr);
317
318 /* Do a single byte read and send stop. */
319 rd = envctrl_i2c_read_data();
320 envctrl_i2c_stop();
321 return rd;
322}
323
324/* Function Description: Decode data read from an adc device using firmware
325 * table.
326 * Return: Number of read bytes. Data is stored in bufdata in ascii format.
327 */
328static int envctrl_i2c_data_translate(unsigned char data, int translate_type,
329 int scale, char *tbl, char *bufdata)
330{
331 int len = 0;
332
333 switch (translate_type) {
334 case ENVCTRL_TRANSLATE_NO:
335 /* No decode necessary. */
336 len = 1;
337 bufdata[0] = data;
338 break;
339
340 case ENVCTRL_TRANSLATE_FULL:
341 /* Decode this way: data = table[data]. */
342 len = 1;
343 bufdata[0] = tbl[data];
344 break;
345
346 case ENVCTRL_TRANSLATE_SCALE:
347 /* Decode this way: data = table[data]/scale */
348 sprintf(bufdata,"%d ", (tbl[data] * 10) / (scale));
349 len = strlen(bufdata);
350 bufdata[len - 1] = bufdata[len - 2];
351 bufdata[len - 2] = '.';
352 break;
353
354 default:
355 break;
Peter Senna Tschudinda201162012-09-12 07:03:12 +0000356 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357
358 return len;
359}
360
361/* Function Description: Read cpu-related data such as cpu temperature, voltage.
362 * Return: Number of read bytes. Data is stored in bufdata in ascii format.
363 */
364static int envctrl_read_cpu_info(int cpu, struct i2c_child_t *pchild,
365 char mon_type, unsigned char *bufdata)
366{
367 unsigned char data;
368 int i;
369 char *tbl, j = -1;
370
371 /* Find the right monitor type and channel. */
372 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) {
373 if (pchild->mon_type[i] == mon_type) {
374 if (++j == cpu) {
375 break;
376 }
377 }
378 }
379
380 if (j != cpu)
381 return 0;
382
383 /* Read data from address and port. */
384 data = envctrl_i2c_read_8591((unsigned char)pchild->addr,
385 (unsigned char)pchild->chnl_array[i].chnl_no);
386
387 /* Find decoding table. */
388 tbl = pchild->tables + pchild->tblprop_array[i].offset;
389
390 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type,
391 pchild->tblprop_array[i].scale,
392 tbl, bufdata);
393}
394
395/* Function Description: Read noncpu-related data such as motherboard
396 * temperature.
397 * Return: Number of read bytes. Data is stored in bufdata in ascii format.
398 */
399static int envctrl_read_noncpu_info(struct i2c_child_t *pchild,
400 char mon_type, unsigned char *bufdata)
401{
402 unsigned char data;
403 int i;
404 char *tbl = NULL;
405
406 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) {
407 if (pchild->mon_type[i] == mon_type)
408 break;
409 }
410
411 if (i >= PCF8584_MAX_CHANNELS)
412 return 0;
413
414 /* Read data from address and port. */
415 data = envctrl_i2c_read_8591((unsigned char)pchild->addr,
416 (unsigned char)pchild->chnl_array[i].chnl_no);
417
418 /* Find decoding table. */
419 tbl = pchild->tables + pchild->tblprop_array[i].offset;
420
421 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type,
422 pchild->tblprop_array[i].scale,
423 tbl, bufdata);
424}
425
426/* Function Description: Read fan status.
427 * Return : Always 1 byte. Status stored in bufdata.
428 */
429static int envctrl_i2c_fan_status(struct i2c_child_t *pchild,
430 unsigned char data,
431 char *bufdata)
432{
433 unsigned char tmp, ret = 0;
434 int i, j = 0;
435
436 tmp = data & pchild->fan_mask;
437
438 if (tmp == pchild->fan_mask) {
439 /* All bits are on. All fans are functioning. */
440 ret = ENVCTRL_ALL_FANS_GOOD;
441 } else if (tmp == 0) {
442 /* No bits are on. No fans are functioning. */
443 ret = ENVCTRL_ALL_FANS_BAD;
444 } else {
445 /* Go through all channels, mark 'on' the matched bits.
446 * Notice that fan_mask may have discontiguous bits but
447 * return mask are always contiguous. For example if we
448 * monitor 4 fans at channels 0,1,2,4, the return mask
449 * should be 00010000 if only fan at channel 4 is working.
450 */
451 for (i = 0; i < PCF8584_MAX_CHANNELS;i++) {
452 if (pchild->fan_mask & chnls_mask[i]) {
453 if (!(chnls_mask[i] & tmp))
454 ret |= chnls_mask[j];
455
456 j++;
457 }
458 }
459 }
460
461 bufdata[0] = ret;
462 return 1;
463}
464
465/* Function Description: Read global addressing line.
466 * Return : Always 1 byte. Status stored in bufdata.
467 */
468static int envctrl_i2c_globaladdr(struct i2c_child_t *pchild,
469 unsigned char data,
470 char *bufdata)
471{
472 /* Translatation table is not necessary, as global
473 * addr is the integer value of the GA# bits.
474 *
475 * NOTE: MSB is documented as zero, but I see it as '1' always....
476 *
477 * -----------------------------------------------
478 * | 0 | FAL | DEG | GA4 | GA3 | GA2 | GA1 | GA0 |
479 * -----------------------------------------------
480 * GA0 - GA4 integer value of Global Address (backplane slot#)
481 * DEG 0 = cPCI Power supply output is starting to degrade
482 * 1 = cPCI Power supply output is OK
483 * FAL 0 = cPCI Power supply has failed
484 * 1 = cPCI Power supply output is OK
485 */
486 bufdata[0] = (data & ENVCTRL_GLOBALADDR_ADDR_MASK);
487 return 1;
488}
489
490/* Function Description: Read standard voltage and power supply status.
491 * Return : Always 1 byte. Status stored in bufdata.
492 */
493static unsigned char envctrl_i2c_voltage_status(struct i2c_child_t *pchild,
494 unsigned char data,
495 char *bufdata)
496{
497 unsigned char tmp, ret = 0;
498 int i, j = 0;
499
500 tmp = data & pchild->voltage_mask;
501
502 /* Two channels are used to monitor voltage and power supply. */
503 if (tmp == pchild->voltage_mask) {
504 /* All bits are on. Voltage and power supply are okay. */
505 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD;
506 } else if (tmp == 0) {
507 /* All bits are off. Voltage and power supply are bad */
508 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_BAD;
509 } else {
510 /* Either voltage or power supply has problem. */
511 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) {
512 if (pchild->voltage_mask & chnls_mask[i]) {
513 j++;
514
515 /* Break out when there is a mismatch. */
516 if (!(chnls_mask[i] & tmp))
517 break;
518 }
519 }
520
521 /* Make a wish that hardware will always use the
522 * first channel for voltage and the second for
523 * power supply.
524 */
525 if (j == 1)
526 ret = ENVCTRL_VOLTAGE_BAD;
527 else
528 ret = ENVCTRL_POWERSUPPLY_BAD;
529 }
530
531 bufdata[0] = ret;
532 return 1;
533}
534
535/* Function Description: Read a byte from /dev/envctrl. Mapped to user read().
536 * Return: Number of read bytes. 0 for error.
537 */
538static ssize_t
539envctrl_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
540{
541 struct i2c_child_t *pchild;
542 unsigned char data[10];
543 int ret = 0;
544
545 /* Get the type of read as decided in ioctl() call.
546 * Find the appropriate i2c child.
547 * Get the data and put back to the user buffer.
548 */
549
550 switch ((int)(long)file->private_data) {
551 case ENVCTRL_RD_WARNING_TEMPERATURE:
552 if (warning_temperature == 0)
553 return 0;
554
555 data[0] = (unsigned char)(warning_temperature);
556 ret = 1;
557 if (copy_to_user(buf, data, ret))
558 ret = -EFAULT;
559 break;
560
561 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE:
562 if (shutdown_temperature == 0)
563 return 0;
564
565 data[0] = (unsigned char)(shutdown_temperature);
566 ret = 1;
567 if (copy_to_user(buf, data, ret))
568 ret = -EFAULT;
569 break;
570
571 case ENVCTRL_RD_MTHRBD_TEMPERATURE:
572 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_MTHRBDTEMP_MON)))
573 return 0;
574 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_MTHRBDTEMP_MON, data);
575 if (copy_to_user(buf, data, ret))
576 ret = -EFAULT;
577 break;
578
579 case ENVCTRL_RD_CPU_TEMPERATURE:
580 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON)))
581 return 0;
582 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUTEMP_MON, data);
583
584 /* Reset cpu to the default cpu0. */
585 if (copy_to_user(buf, data, ret))
586 ret = -EFAULT;
587 break;
588
589 case ENVCTRL_RD_CPU_VOLTAGE:
590 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUVOLTAGE_MON)))
591 return 0;
592 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUVOLTAGE_MON, data);
593
594 /* Reset cpu to the default cpu0. */
595 if (copy_to_user(buf, data, ret))
596 ret = -EFAULT;
597 break;
598
599 case ENVCTRL_RD_SCSI_TEMPERATURE:
600 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_SCSITEMP_MON)))
601 return 0;
602 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_SCSITEMP_MON, data);
603 if (copy_to_user(buf, data, ret))
604 ret = -EFAULT;
605 break;
606
607 case ENVCTRL_RD_ETHERNET_TEMPERATURE:
608 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_ETHERTEMP_MON)))
609 return 0;
610 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_ETHERTEMP_MON, data);
611 if (copy_to_user(buf, data, ret))
612 ret = -EFAULT;
613 break;
614
615 case ENVCTRL_RD_FAN_STATUS:
616 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_FANSTAT_MON)))
617 return 0;
618 data[0] = envctrl_i2c_read_8574(pchild->addr);
619 ret = envctrl_i2c_fan_status(pchild,data[0], data);
620 if (copy_to_user(buf, data, ret))
621 ret = -EFAULT;
622 break;
623
624 case ENVCTRL_RD_GLOBALADDRESS:
625 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON)))
626 return 0;
627 data[0] = envctrl_i2c_read_8574(pchild->addr);
628 ret = envctrl_i2c_globaladdr(pchild, data[0], data);
629 if (copy_to_user(buf, data, ret))
630 ret = -EFAULT;
631 break;
632
633 case ENVCTRL_RD_VOLTAGE_STATUS:
634 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_VOLTAGESTAT_MON)))
635 /* If voltage monitor not present, check for CPCI equivalent */
636 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON)))
637 return 0;
638 data[0] = envctrl_i2c_read_8574(pchild->addr);
639 ret = envctrl_i2c_voltage_status(pchild, data[0], data);
640 if (copy_to_user(buf, data, ret))
641 ret = -EFAULT;
642 break;
643
644 default:
645 break;
646
Peter Senna Tschudinda201162012-09-12 07:03:12 +0000647 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700648
649 return ret;
650}
651
652/* Function Description: Command what to read. Mapped to user ioctl().
653 * Return: Gives 0 for implemented commands, -EINVAL otherwise.
654 */
Christoph Hellwig1928f8e2005-11-07 14:12:34 -0800655static long
656envctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700657{
658 char __user *infobuf;
659
660 switch (cmd) {
661 case ENVCTRL_RD_WARNING_TEMPERATURE:
662 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE:
663 case ENVCTRL_RD_MTHRBD_TEMPERATURE:
664 case ENVCTRL_RD_FAN_STATUS:
665 case ENVCTRL_RD_VOLTAGE_STATUS:
666 case ENVCTRL_RD_ETHERNET_TEMPERATURE:
667 case ENVCTRL_RD_SCSI_TEMPERATURE:
668 case ENVCTRL_RD_GLOBALADDRESS:
669 file->private_data = (void *)(long)cmd;
670 break;
671
672 case ENVCTRL_RD_CPU_TEMPERATURE:
673 case ENVCTRL_RD_CPU_VOLTAGE:
674 /* Check to see if application passes in any cpu number,
675 * the default is cpu0.
676 */
677 infobuf = (char __user *) arg;
678 if (infobuf == NULL) {
679 read_cpu = 0;
680 }else {
681 get_user(read_cpu, infobuf);
682 }
683
684 /* Save the command for use when reading. */
685 file->private_data = (void *)(long)cmd;
686 break;
687
688 default:
689 return -EINVAL;
Peter Senna Tschudinda201162012-09-12 07:03:12 +0000690 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700691
692 return 0;
693}
694
695/* Function Description: open device. Mapped to user open().
696 * Return: Always 0.
697 */
698static int
699envctrl_open(struct inode *inode, struct file *file)
700{
701 file->private_data = NULL;
702 return 0;
703}
704
705/* Function Description: Open device. Mapped to user close().
706 * Return: Always 0.
707 */
708static int
709envctrl_release(struct inode *inode, struct file *file)
710{
711 return 0;
712}
713
Arjan van de Ven00977a52007-02-12 00:55:34 -0800714static const struct file_operations envctrl_fops = {
Christoph Hellwig1928f8e2005-11-07 14:12:34 -0800715 .owner = THIS_MODULE,
716 .read = envctrl_read,
717 .unlocked_ioctl = envctrl_ioctl,
718#ifdef CONFIG_COMPAT
719 .compat_ioctl = envctrl_ioctl,
720#endif
721 .open = envctrl_open,
722 .release = envctrl_release,
Arnd Bergmann6038f372010-08-15 18:52:59 +0200723 .llseek = noop_llseek,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700724};
725
726static struct miscdevice envctrl_dev = {
727 ENVCTRL_MINOR,
728 "envctrl",
729 &envctrl_fops
730};
731
732/* Function Description: Set monitor type based on firmware description.
733 * Return: None.
734 */
735static void envctrl_set_mon(struct i2c_child_t *pchild,
Stephen Rothwellccf0dec2007-03-29 00:49:54 -0700736 const char *chnl_desc,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700737 int chnl_no)
738{
739 /* Firmware only has temperature type. It does not distinguish
740 * different kinds of temperatures. We use channel description
741 * to disinguish them.
742 */
743 if (!(strcmp(chnl_desc,"temp,cpu")) ||
744 !(strcmp(chnl_desc,"temp,cpu0")) ||
745 !(strcmp(chnl_desc,"temp,cpu1")) ||
746 !(strcmp(chnl_desc,"temp,cpu2")) ||
747 !(strcmp(chnl_desc,"temp,cpu3")))
748 pchild->mon_type[chnl_no] = ENVCTRL_CPUTEMP_MON;
749
750 if (!(strcmp(chnl_desc,"vddcore,cpu0")) ||
751 !(strcmp(chnl_desc,"vddcore,cpu1")) ||
752 !(strcmp(chnl_desc,"vddcore,cpu2")) ||
753 !(strcmp(chnl_desc,"vddcore,cpu3")))
754 pchild->mon_type[chnl_no] = ENVCTRL_CPUVOLTAGE_MON;
755
756 if (!(strcmp(chnl_desc,"temp,motherboard")))
757 pchild->mon_type[chnl_no] = ENVCTRL_MTHRBDTEMP_MON;
758
759 if (!(strcmp(chnl_desc,"temp,scsi")))
760 pchild->mon_type[chnl_no] = ENVCTRL_SCSITEMP_MON;
761
762 if (!(strcmp(chnl_desc,"temp,ethernet")))
763 pchild->mon_type[chnl_no] = ENVCTRL_ETHERTEMP_MON;
764}
765
766/* Function Description: Initialize monitor channel with channel desc,
767 * decoding tables, monitor type, optional properties.
768 * Return: None.
769 */
David S. Miller690c8fd2006-06-22 19:12:03 -0700770static void envctrl_init_adc(struct i2c_child_t *pchild, struct device_node *dp)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700771{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700772 int i = 0, len;
Stephen Rothwellccf0dec2007-03-29 00:49:54 -0700773 const char *pos;
774 const unsigned int *pval;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700775
776 /* Firmware describe channels into a stream separated by a '\0'. */
David S. Miller690c8fd2006-06-22 19:12:03 -0700777 pos = of_get_property(dp, "channels-description", &len);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700778
779 while (len > 0) {
780 int l = strlen(pos) + 1;
781 envctrl_set_mon(pchild, pos, i++);
782 len -= l;
783 pos += l;
784 }
785
786 /* Get optional properties. */
David S. Miller690c8fd2006-06-22 19:12:03 -0700787 pval = of_get_property(dp, "warning-temp", NULL);
788 if (pval)
789 warning_temperature = *pval;
790
791 pval = of_get_property(dp, "shutdown-temp", NULL);
792 if (pval)
793 shutdown_temperature = *pval;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700794}
795
796/* Function Description: Initialize child device monitoring fan status.
797 * Return: None.
798 */
799static void envctrl_init_fanstat(struct i2c_child_t *pchild)
800{
801 int i;
802
803 /* Go through all channels and set up the mask. */
804 for (i = 0; i < pchild->total_chnls; i++)
805 pchild->fan_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no];
806
807 /* We only need to know if this child has fan status monitored.
808 * We don't care which channels since we have the mask already.
809 */
810 pchild->mon_type[0] = ENVCTRL_FANSTAT_MON;
811}
812
813/* Function Description: Initialize child device for global addressing line.
814 * Return: None.
815 */
816static void envctrl_init_globaladdr(struct i2c_child_t *pchild)
817{
818 int i;
819
820 /* Voltage/PowerSupply monitoring is piggybacked
821 * with Global Address on CompactPCI. See comments
822 * within envctrl_i2c_globaladdr for bit assignments.
823 *
824 * The mask is created here by assigning mask bits to each
825 * bit position that represents PCF8584_VOLTAGE_TYPE data.
826 * Channel numbers are not consecutive within the globaladdr
827 * node (why?), so we use the actual counter value as chnls_mask
828 * index instead of the chnl_array[x].chnl_no value.
829 *
830 * NOTE: This loop could be replaced with a constant representing
831 * a mask of bits 5&6 (ENVCTRL_GLOBALADDR_PSTAT_MASK).
832 */
833 for (i = 0; i < pchild->total_chnls; i++) {
834 if (PCF8584_VOLTAGE_TYPE == pchild->chnl_array[i].type) {
835 pchild->voltage_mask |= chnls_mask[i];
836 }
837 }
838
839 /* We only need to know if this child has global addressing
840 * line monitored. We don't care which channels since we know
841 * the mask already (ENVCTRL_GLOBALADDR_ADDR_MASK).
842 */
843 pchild->mon_type[0] = ENVCTRL_GLOBALADDR_MON;
844}
845
846/* Initialize child device monitoring voltage status. */
847static void envctrl_init_voltage_status(struct i2c_child_t *pchild)
848{
849 int i;
850
851 /* Go through all channels and set up the mask. */
852 for (i = 0; i < pchild->total_chnls; i++)
853 pchild->voltage_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no];
854
855 /* We only need to know if this child has voltage status monitored.
856 * We don't care which channels since we have the mask already.
857 */
858 pchild->mon_type[0] = ENVCTRL_VOLTAGESTAT_MON;
859}
860
861/* Function Description: Initialize i2c child device.
862 * Return: None.
863 */
David S. Miller6b8c90f2008-08-29 21:05:15 -0700864static void envctrl_init_i2c_child(struct device_node *dp,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700865 struct i2c_child_t *pchild)
866{
David S. Miller690c8fd2006-06-22 19:12:03 -0700867 int len, i, tbls_size = 0;
Stephen Rothwellccf0dec2007-03-29 00:49:54 -0700868 const void *pval;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700869
870 /* Get device address. */
David S. Miller690c8fd2006-06-22 19:12:03 -0700871 pval = of_get_property(dp, "reg", &len);
872 memcpy(&pchild->addr, pval, len);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700873
874 /* Get tables property. Read firmware temperature tables. */
David S. Miller690c8fd2006-06-22 19:12:03 -0700875 pval = of_get_property(dp, "translation", &len);
876 if (pval && len > 0) {
877 memcpy(pchild->tblprop_array, pval, len);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700878 pchild->total_tbls = len / sizeof(struct pcf8584_tblprop);
879 for (i = 0; i < pchild->total_tbls; i++) {
880 if ((pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset) > tbls_size) {
881 tbls_size = pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset;
882 }
883 }
884
885 pchild->tables = kmalloc(tbls_size, GFP_KERNEL);
886 if (pchild->tables == NULL){
David S. Miller6b8c90f2008-08-29 21:05:15 -0700887 printk(KERN_ERR PFX "Failed to allocate table.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700888 return;
889 }
David S. Miller690c8fd2006-06-22 19:12:03 -0700890 pval = of_get_property(dp, "tables", &len);
891 if (!pval || len <= 0) {
David S. Miller6b8c90f2008-08-29 21:05:15 -0700892 printk(KERN_ERR PFX "Failed to get table.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700893 return;
894 }
David S. Miller690c8fd2006-06-22 19:12:03 -0700895 memcpy(pchild->tables, pval, len);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700896 }
897
898 /* SPARCengine ASM Reference Manual (ref. SMI doc 805-7581-04)
899 * sections 2.5, 3.5, 4.5 state node 0x70 for CP1400/1500 is
900 * "For Factory Use Only."
901 *
902 * We ignore the node on these platforms by assigning the
903 * 'NULL' monitor type.
904 */
905 if (ENVCTRL_CPCI_IGNORED_NODE == pchild->addr) {
David S. Miller690c8fd2006-06-22 19:12:03 -0700906 struct device_node *root_node;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700907 int len;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700908
David S. Miller690c8fd2006-06-22 19:12:03 -0700909 root_node = of_find_node_by_path("/");
910 if (!strcmp(root_node->name, "SUNW,UltraSPARC-IIi-cEngine")) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700911 for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) {
912 pchild->mon_type[len] = ENVCTRL_NOMON;
913 }
914 return;
915 }
916 }
917
918 /* Get the monitor channels. */
David S. Miller690c8fd2006-06-22 19:12:03 -0700919 pval = of_get_property(dp, "channels-in-use", &len);
920 memcpy(pchild->chnl_array, pval, len);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700921 pchild->total_chnls = len / sizeof(struct pcf8584_channel);
922
923 for (i = 0; i < pchild->total_chnls; i++) {
924 switch (pchild->chnl_array[i].type) {
925 case PCF8584_TEMP_TYPE:
David S. Miller690c8fd2006-06-22 19:12:03 -0700926 envctrl_init_adc(pchild, dp);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700927 break;
928
929 case PCF8584_GLOBALADDR_TYPE:
930 envctrl_init_globaladdr(pchild);
931 i = pchild->total_chnls;
932 break;
933
934 case PCF8584_FANSTAT_TYPE:
935 envctrl_init_fanstat(pchild);
936 i = pchild->total_chnls;
937 break;
938
939 case PCF8584_VOLTAGE_TYPE:
940 if (pchild->i2ctype == I2C_ADC) {
David S. Miller690c8fd2006-06-22 19:12:03 -0700941 envctrl_init_adc(pchild,dp);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700942 } else {
943 envctrl_init_voltage_status(pchild);
944 }
945 i = pchild->total_chnls;
946 break;
947
948 default:
949 break;
Peter Senna Tschudinda201162012-09-12 07:03:12 +0000950 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700951 }
952}
953
954/* Function Description: Search the child device list for a device.
955 * Return : The i2c child if found. NULL otherwise.
956 */
957static struct i2c_child_t *envctrl_get_i2c_child(unsigned char mon_type)
958{
959 int i, j;
960
961 for (i = 0; i < ENVCTRL_MAX_CPU*2; i++) {
962 for (j = 0; j < PCF8584_MAX_CHANNELS; j++) {
963 if (i2c_childlist[i].mon_type[j] == mon_type) {
964 return (struct i2c_child_t *)(&(i2c_childlist[i]));
965 }
966 }
967 }
968 return NULL;
969}
970
971static void envctrl_do_shutdown(void)
972{
973 static int inprog = 0;
Arnd Bergmann3db03b42006-10-02 02:18:31 -0700974 int ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700975
976 if (inprog != 0)
977 return;
978
979 inprog = 1;
980 printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n");
Jeremy Fitzhardinge10a0a8d2007-07-17 18:37:02 -0700981 ret = orderly_poweroff(true);
Arnd Bergmann3db03b42006-10-02 02:18:31 -0700982 if (ret < 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700983 printk(KERN_CRIT "kenvctrld: WARNING: system shutdown failed!\n");
984 inprog = 0; /* unlikely to succeed, but we could try again */
985 }
986}
987
988static struct task_struct *kenvctrld_task;
989
990static int kenvctrld(void *__unused)
991{
992 int poll_interval;
993 int whichcpu;
994 char tempbuf[10];
995 struct i2c_child_t *cputemp;
996
997 if (NULL == (cputemp = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) {
David S. Miller6b8c90f2008-08-29 21:05:15 -0700998 printk(KERN_ERR PFX
999 "kenvctrld unable to monitor CPU temp-- exiting\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001000 return -ENODEV;
1001 }
1002
Nishanth Aravamudancb39d262005-07-24 19:34:33 -07001003 poll_interval = 5000; /* TODO env_mon_interval */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001004
David S. Miller6b8c90f2008-08-29 21:05:15 -07001005 printk(KERN_INFO PFX "%s starting...\n", current->comm);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001006 for (;;) {
Christoph Hellwig218b29e2005-08-09 12:30:07 -07001007 msleep_interruptible(poll_interval);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001008
Christoph Hellwig218b29e2005-08-09 12:30:07 -07001009 if (kthread_should_stop())
1010 break;
1011
Linus Torvalds1da177e2005-04-16 15:20:36 -07001012 for (whichcpu = 0; whichcpu < ENVCTRL_MAX_CPU; ++whichcpu) {
1013 if (0 < envctrl_read_cpu_info(whichcpu, cputemp,
1014 ENVCTRL_CPUTEMP_MON,
1015 tempbuf)) {
1016 if (tempbuf[0] >= shutdown_temperature) {
1017 printk(KERN_CRIT
1018 "%s: WARNING: CPU%i temperature %i C meets or exceeds "\
1019 "shutdown threshold %i C\n",
1020 current->comm, whichcpu,
1021 tempbuf[0], shutdown_temperature);
1022 envctrl_do_shutdown();
1023 }
1024 }
1025 }
1026 }
David S. Miller6b8c90f2008-08-29 21:05:15 -07001027 printk(KERN_INFO PFX "%s exiting...\n", current->comm);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001028 return 0;
1029}
1030
Greg Kroah-Hartman082a2002012-12-21 13:24:23 -08001031static int envctrl_probe(struct platform_device *op)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001032{
David S. Miller6b8c90f2008-08-29 21:05:15 -07001033 struct device_node *dp;
1034 int index, err;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001035
David S. Miller6b8c90f2008-08-29 21:05:15 -07001036 if (i2c)
1037 return -EINVAL;
1038
1039 i2c = of_ioremap(&op->resource[0], 0, 0x2, DRIVER_NAME);
1040 if (!i2c)
1041 return -ENOMEM;
1042
1043 index = 0;
Grant Likely61c7a082010-04-13 16:12:29 -07001044 dp = op->dev.of_node->child;
David S. Miller6b8c90f2008-08-29 21:05:15 -07001045 while (dp) {
1046 if (!strcmp(dp->name, "gpio")) {
1047 i2c_childlist[index].i2ctype = I2C_GPIO;
1048 envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
1049 } else if (!strcmp(dp->name, "adc")) {
1050 i2c_childlist[index].i2ctype = I2C_ADC;
1051 envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001052 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001053
David S. Miller6b8c90f2008-08-29 21:05:15 -07001054 dp = dp->sibling;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001055 }
1056
1057 /* Set device address. */
1058 writeb(CONTROL_PIN, i2c + PCF8584_CSR);
1059 writeb(PCF8584_ADDRESS, i2c + PCF8584_DATA);
1060
1061 /* Set system clock and SCL frequencies. */
1062 writeb(CONTROL_PIN | CONTROL_ES1, i2c + PCF8584_CSR);
1063 writeb(CLK_4_43 | BUS_CLK_90, i2c + PCF8584_DATA);
1064
1065 /* Enable serial interface. */
1066 writeb(CONTROL_PIN | CONTROL_ES0 | CONTROL_ACK, i2c + PCF8584_CSR);
1067 udelay(200);
1068
1069 /* Register the device as a minor miscellaneous device. */
1070 err = misc_register(&envctrl_dev);
1071 if (err) {
David S. Miller6b8c90f2008-08-29 21:05:15 -07001072 printk(KERN_ERR PFX "Unable to get misc minor %d\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -07001073 envctrl_dev.minor);
1074 goto out_iounmap;
1075 }
1076
1077 /* Note above traversal routine post-incremented 'i' to accommodate
1078 * a next child device, so we decrement before reverse-traversal of
1079 * child devices.
1080 */
David S. Miller6b8c90f2008-08-29 21:05:15 -07001081 printk(KERN_INFO PFX "Initialized ");
1082 for (--index; index >= 0; --index) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001083 printk("[%s 0x%lx]%s",
David S. Miller6b8c90f2008-08-29 21:05:15 -07001084 (I2C_ADC == i2c_childlist[index].i2ctype) ? "adc" :
1085 ((I2C_GPIO == i2c_childlist[index].i2ctype) ? "gpio" : "unknown"),
1086 i2c_childlist[index].addr, (0 == index) ? "\n" : " ");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001087 }
1088
Christoph Hellwig218b29e2005-08-09 12:30:07 -07001089 kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
1090 if (IS_ERR(kenvctrld_task)) {
David S. Miller38c18442005-08-09 14:43:14 -07001091 err = PTR_ERR(kenvctrld_task);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001092 goto out_deregister;
Christoph Hellwig218b29e2005-08-09 12:30:07 -07001093 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001094
1095 return 0;
1096
1097out_deregister:
1098 misc_deregister(&envctrl_dev);
1099out_iounmap:
David S. Miller6b8c90f2008-08-29 21:05:15 -07001100 of_iounmap(&op->resource[0], i2c, 0x2);
1101 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
1102 kfree(i2c_childlist[index].tables);
Jesper Juhl6044ec82005-11-07 01:01:32 -08001103
Linus Torvalds1da177e2005-04-16 15:20:36 -07001104 return err;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001105}
1106
Greg Kroah-Hartman082a2002012-12-21 13:24:23 -08001107static int envctrl_remove(struct platform_device *op)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108{
David S. Miller6b8c90f2008-08-29 21:05:15 -07001109 int index;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001110
Christoph Hellwig218b29e2005-08-09 12:30:07 -07001111 kthread_stop(kenvctrld_task);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001112
David S. Miller6b8c90f2008-08-29 21:05:15 -07001113 of_iounmap(&op->resource[0], i2c, 0x2);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001114 misc_deregister(&envctrl_dev);
1115
David S. Miller6b8c90f2008-08-29 21:05:15 -07001116 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
1117 kfree(i2c_childlist[index].tables);
1118
1119 return 0;
1120}
1121
David S. Millerfd098312008-08-31 01:23:17 -07001122static const struct of_device_id envctrl_match[] = {
David S. Miller6b8c90f2008-08-29 21:05:15 -07001123 {
1124 .name = "i2c",
1125 .compatible = "i2cpcf,8584",
1126 },
1127 {},
1128};
1129MODULE_DEVICE_TABLE(of, envctrl_match);
1130
Grant Likely4ebb24f2011-02-22 20:01:33 -07001131static struct platform_driver envctrl_driver = {
Grant Likely40182942010-04-13 16:13:02 -07001132 .driver = {
1133 .name = DRIVER_NAME,
1134 .owner = THIS_MODULE,
1135 .of_match_table = envctrl_match,
1136 },
David S. Miller6b8c90f2008-08-29 21:05:15 -07001137 .probe = envctrl_probe,
Greg Kroah-Hartman082a2002012-12-21 13:24:23 -08001138 .remove = envctrl_remove,
David S. Miller6b8c90f2008-08-29 21:05:15 -07001139};
1140
Axel Lindbf2b922011-11-26 19:04:25 +00001141module_platform_driver(envctrl_driver);
David S. Miller6b8c90f2008-08-29 21:05:15 -07001142
Linus Torvalds1da177e2005-04-16 15:20:36 -07001143MODULE_LICENSE("GPL");