blob: b45ac6229b57137d11898ede5ce11f7ec7c69439 [file] [log] [blame]
Jingchang Luc1967242013-05-29 10:12:17 +02001/*
2 * Copyright 2012-2013 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
8 */
9
10#include <linux/interrupt.h>
11#include <linux/clockchips.h>
12#include <linux/clk.h>
13#include <linux/of_address.h>
14#include <linux/of_irq.h>
Fabio Estevam26993392013-06-24 20:20:08 -030015#include <linux/sched_clock.h>
Jingchang Luc1967242013-05-29 10:12:17 +020016
17/*
18 * Each pit takes 0x10 Bytes register space
19 */
20#define PITMCR 0x00
21#define PIT0_OFFSET 0x100
22#define PITn_OFFSET(n) (PIT0_OFFSET + 0x10 * (n))
23#define PITLDVAL 0x00
24#define PITCVAL 0x04
25#define PITTCTRL 0x08
26#define PITTFLG 0x0c
27
28#define PITMCR_MDIS (0x1 << 1)
29
30#define PITTCTRL_TEN (0x1 << 0)
31#define PITTCTRL_TIE (0x1 << 1)
32#define PITCTRL_CHN (0x1 << 2)
33
34#define PITTFLG_TIF 0x1
35
36static void __iomem *clksrc_base;
37static void __iomem *clkevt_base;
38static unsigned long cycle_per_jiffy;
39
40static inline void pit_timer_enable(void)
41{
42 __raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
43}
44
45static inline void pit_timer_disable(void)
46{
47 __raw_writel(0, clkevt_base + PITTCTRL);
48}
49
50static inline void pit_irq_acknowledge(void)
51{
52 __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
53}
54
Stephen Boydf4e6e1e2013-07-18 16:21:29 -070055static u64 pit_read_sched_clock(void)
Jingchang Luc1967242013-05-29 10:12:17 +020056{
Stefan Agner224aa3e2014-03-05 23:11:08 +010057 return ~__raw_readl(clksrc_base + PITCVAL);
Jingchang Luc1967242013-05-29 10:12:17 +020058}
59
60static int __init pit_clocksource_init(unsigned long rate)
61{
62 /* set the max load value and start the clock source counter */
63 __raw_writel(0, clksrc_base + PITTCTRL);
64 __raw_writel(~0UL, clksrc_base + PITLDVAL);
65 __raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
66
Stephen Boydf4e6e1e2013-07-18 16:21:29 -070067 sched_clock_register(pit_read_sched_clock, 32, rate);
Jingchang Luc1967242013-05-29 10:12:17 +020068 return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
69 300, 32, clocksource_mmio_readl_down);
70}
71
72static int pit_set_next_event(unsigned long delta,
73 struct clock_event_device *unused)
74{
75 /*
76 * set a new value to PITLDVAL register will not restart the timer,
77 * to abort the current cycle and start a timer period with the new
78 * value, the timer must be disabled and enabled again.
79 * and the PITLAVAL should be set to delta minus one according to pit
80 * hardware requirement.
81 */
82 pit_timer_disable();
83 __raw_writel(delta - 1, clkevt_base + PITLDVAL);
84 pit_timer_enable();
85
86 return 0;
87}
88
89static void pit_set_mode(enum clock_event_mode mode,
90 struct clock_event_device *evt)
91{
92 switch (mode) {
93 case CLOCK_EVT_MODE_PERIODIC:
94 pit_set_next_event(cycle_per_jiffy, evt);
95 break;
Stefan Agner04f7e3e2014-09-29 01:50:05 +020096 case CLOCK_EVT_MODE_SHUTDOWN:
97 case CLOCK_EVT_MODE_UNUSED:
98 pit_timer_disable();
99 break;
Jingchang Luc1967242013-05-29 10:12:17 +0200100 default:
101 break;
102 }
103}
104
105static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
106{
107 struct clock_event_device *evt = dev_id;
108
109 pit_irq_acknowledge();
110
111 /*
112 * pit hardware doesn't support oneshot, it will generate an interrupt
113 * and reload the counter value from PITLDVAL when PITCVAL reach zero,
114 * and start the counter again. So software need to disable the timer
115 * to stop the counter loop in ONESHOT mode.
116 */
117 if (likely(evt->mode == CLOCK_EVT_MODE_ONESHOT))
118 pit_timer_disable();
119
120 evt->event_handler(evt);
121
122 return IRQ_HANDLED;
123}
124
125static struct clock_event_device clockevent_pit = {
126 .name = "VF pit timer",
127 .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
128 .set_mode = pit_set_mode,
129 .set_next_event = pit_set_next_event,
130 .rating = 300,
131};
132
133static struct irqaction pit_timer_irq = {
134 .name = "VF pit timer",
135 .flags = IRQF_TIMER | IRQF_IRQPOLL,
136 .handler = pit_timer_interrupt,
137 .dev_id = &clockevent_pit,
138};
139
140static int __init pit_clockevent_init(unsigned long rate, int irq)
141{
142 __raw_writel(0, clkevt_base + PITTCTRL);
143 __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
144
145 BUG_ON(setup_irq(irq, &pit_timer_irq));
146
147 clockevent_pit.cpumask = cpumask_of(0);
148 clockevent_pit.irq = irq;
149 /*
150 * The value for the LDVAL register trigger is calculated as:
151 * LDVAL trigger = (period / clock period) - 1
152 * The pit is a 32-bit down count timer, when the conter value
153 * reaches 0, it will generate an interrupt, thus the minimal
154 * LDVAL trigger value is 1. And then the min_delta is
155 * minimal LDVAL trigger value + 1, and the max_delta is full 32-bit.
156 */
157 clockevents_config_and_register(&clockevent_pit, rate, 2, 0xffffffff);
158
159 return 0;
160}
161
162static void __init pit_timer_init(struct device_node *np)
163{
164 struct clk *pit_clk;
165 void __iomem *timer_base;
166 unsigned long clk_rate;
167 int irq;
168
169 timer_base = of_iomap(np, 0);
170 BUG_ON(!timer_base);
171
172 /*
173 * PIT0 and PIT1 can be chained to build a 64-bit timer,
174 * so choose PIT2 as clocksource, PIT3 as clockevent device,
175 * and leave PIT0 and PIT1 unused for anyone else who needs them.
176 */
177 clksrc_base = timer_base + PITn_OFFSET(2);
178 clkevt_base = timer_base + PITn_OFFSET(3);
179
180 irq = irq_of_parse_and_map(np, 0);
181 BUG_ON(irq <= 0);
182
183 pit_clk = of_clk_get(np, 0);
184 BUG_ON(IS_ERR(pit_clk));
185
186 BUG_ON(clk_prepare_enable(pit_clk));
187
188 clk_rate = clk_get_rate(pit_clk);
189 cycle_per_jiffy = clk_rate / (HZ);
190
191 /* enable the pit module */
192 __raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
193
194 BUG_ON(pit_clocksource_init(clk_rate));
195
196 pit_clockevent_init(clk_rate, irq);
197}
198CLOCKSOURCE_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init);