Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 1 | /* |
| 2 | * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff) |
| 3 | * |
| 4 | * Written by: Aaro Koskinen <aaro.koskinen@iki.fi> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | */ |
| 10 | |
Pali Rohár | a494e32 | 2015-02-26 14:49:57 +0100 | [diff] [blame] | 11 | #include "omap36xx.dtsi" |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 12 | |
| 13 | / { |
| 14 | cpus { |
| 15 | cpu@0 { |
| 16 | cpu0-supply = <&vcc>; |
Filip Matijević | 0f4f154 | 2016-03-13 01:06:19 +0100 | [diff] [blame] | 17 | operating-points = < |
| 18 | /* kHz uV */ |
| 19 | 300000 1012500 |
| 20 | 600000 1200000 |
| 21 | 800000 1325000 |
| 22 | 1000000 1375000 |
| 23 | >; |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 24 | }; |
| 25 | }; |
| 26 | |
| 27 | memory { |
| 28 | device_type = "memory"; |
| 29 | reg = <0x80000000 0x40000000>; /* 1 GB */ |
| 30 | }; |
| 31 | |
Javier Martinez Canillas | 909b0eb | 2016-08-01 12:47:00 -0400 | [diff] [blame^] | 32 | vemmc: fixedregulator0 { |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 33 | compatible = "regulator-fixed"; |
| 34 | regulator-name = "VEMMC"; |
| 35 | regulator-min-microvolt = <2900000>; |
| 36 | regulator-max-microvolt = <2900000>; |
Javier Martinez Canillas | 3a637e0 | 2015-10-06 11:03:39 +0200 | [diff] [blame] | 37 | gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */ |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 38 | startup-delay-us = <150>; |
| 39 | enable-active-high; |
| 40 | }; |
Sebastian Reichel | 96d3bb1 | 2016-01-09 04:19:34 +0100 | [diff] [blame] | 41 | |
Javier Martinez Canillas | 909b0eb | 2016-08-01 12:47:00 -0400 | [diff] [blame^] | 42 | vwlan_fixed: fixedregulator2 { |
Sebastian Reichel | 96d3bb1 | 2016-01-09 04:19:34 +0100 | [diff] [blame] | 43 | compatible = "regulator-fixed"; |
| 44 | regulator-name = "VWLAN"; |
| 45 | gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */ |
| 46 | enable-active-high; |
| 47 | regulator-boot-off; |
| 48 | }; |
Sebastian Reichel | d5b0eab | 2016-03-13 01:06:17 +0100 | [diff] [blame] | 49 | |
| 50 | leds { |
| 51 | compatible = "gpio-leds"; |
| 52 | |
| 53 | heartbeat { |
| 54 | label = "debug::sleep"; |
| 55 | gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; /* gpio92 */ |
| 56 | linux,default-trigger = "default-on"; |
| 57 | pinctrl-names = "default"; |
| 58 | pinctrl-0 = <&debug_leds>; |
| 59 | }; |
| 60 | }; |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 61 | }; |
| 62 | |
| 63 | &omap3_pmx_core { |
Filip Matijević | 83faf92 | 2016-03-13 01:06:20 +0100 | [diff] [blame] | 64 | accelerator_pins: pinmux_accelerator_pins { |
| 65 | pinctrl-single,pins = < |
| 66 | OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */ |
| 67 | OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */ |
| 68 | >; |
| 69 | }; |
| 70 | |
Sebastian Reichel | d5b0eab | 2016-03-13 01:06:17 +0100 | [diff] [blame] | 71 | debug_leds: pinmux_debug_led_pins { |
| 72 | pinctrl-single,pins = < |
| 73 | OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */ |
| 74 | >; |
| 75 | }; |
| 76 | |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 77 | mmc2_pins: pinmux_mmc2_pins { |
| 78 | pinctrl-single,pins = < |
Javier Martinez Canillas | 53ccdd4 | 2015-11-13 01:54:06 -0300 | [diff] [blame] | 79 | OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ |
| 80 | OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ |
| 81 | OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ |
| 82 | OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ |
| 83 | OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ |
| 84 | OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 85 | >; |
| 86 | }; |
Sebastian Reichel | 96d3bb1 | 2016-01-09 04:19:34 +0100 | [diff] [blame] | 87 | |
| 88 | wlan_pins: pinmux_wlan_pins { |
| 89 | pinctrl-single,pins = < |
| 90 | OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */ |
| 91 | OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */ |
| 92 | >; |
| 93 | }; |
Sebastian Reichel | 3bec8c8 | 2016-01-17 16:49:06 +0100 | [diff] [blame] | 94 | |
| 95 | ssi_pins: pinmux_ssi_pins { |
| 96 | pinctrl-single,pins = < |
| 97 | OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ |
| 98 | OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ |
| 99 | OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ |
Tony Lindgren | e0e80d4 | 2016-05-12 13:29:48 -0700 | [diff] [blame] | 100 | OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ |
Sebastian Reichel | 3bec8c8 | 2016-01-17 16:49:06 +0100 | [diff] [blame] | 101 | OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ |
| 102 | OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ |
| 103 | OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ |
| 104 | OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ |
| 105 | >; |
| 106 | }; |
Sebastian Reichel | f21b987 | 2016-01-17 16:49:09 +0100 | [diff] [blame] | 107 | |
Sebastian Reichel | 60fca6b | 2016-01-31 01:52:37 +0100 | [diff] [blame] | 108 | ssi_pins_idle: pinmux_ssi_pins_idle { |
| 109 | pinctrl-single,pins = < |
| 110 | OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ |
| 111 | OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ |
| 112 | OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ |
Tony Lindgren | e0e80d4 | 2016-05-12 13:29:48 -0700 | [diff] [blame] | 113 | OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ |
Sebastian Reichel | 60fca6b | 2016-01-31 01:52:37 +0100 | [diff] [blame] | 114 | OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ |
| 115 | OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ |
| 116 | OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ |
| 117 | OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */ |
| 118 | >; |
| 119 | }; |
| 120 | |
Sebastian Reichel | f21b987 | 2016-01-17 16:49:09 +0100 | [diff] [blame] | 121 | modem_pins1: pinmux_modem_core1_pins { |
| 122 | pinctrl-single,pins = < |
Tony Lindgren | e0e80d4 | 2016-05-12 13:29:48 -0700 | [diff] [blame] | 123 | OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ |
Sebastian Reichel | f21b987 | 2016-01-17 16:49:09 +0100 | [diff] [blame] | 124 | OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ |
| 125 | OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ |
| 126 | >; |
| 127 | }; |
| 128 | }; |
| 129 | |
| 130 | &omap3_pmx_core2 { |
| 131 | modem_pins2: pinmux_modem_core2_pins { |
| 132 | pinctrl-single,pins = < |
| 133 | OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */ |
| 134 | >; |
| 135 | }; |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 136 | }; |
| 137 | |
| 138 | &i2c1 { |
| 139 | clock-frequency = <2900000>; |
| 140 | |
| 141 | twl: twl@48 { |
| 142 | reg = <0x48>; |
| 143 | interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| 144 | interrupt-parent = <&intc>; |
| 145 | }; |
| 146 | }; |
| 147 | |
| 148 | /include/ "twl4030.dtsi" |
| 149 | |
| 150 | &twl { |
| 151 | compatible = "ti,twl5031"; |
Aaro Koskinen | f4b3690 | 2014-12-26 22:09:49 +0200 | [diff] [blame] | 152 | |
| 153 | twl_power: power { |
| 154 | compatible = "ti,twl4030-power"; |
| 155 | ti,use_poweroff; |
| 156 | }; |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 157 | }; |
| 158 | |
| 159 | &twl_gpio { |
| 160 | ti,pullups = <0x000001>; /* BIT(0) */ |
| 161 | ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ |
| 162 | }; |
| 163 | |
Sebastian Reichel | 50413b9 | 2016-03-13 01:06:14 +0100 | [diff] [blame] | 164 | &vdac { |
| 165 | regulator-name = "vdac"; |
| 166 | regulator-min-microvolt = <1800000>; |
| 167 | regulator-max-microvolt = <1800000>; |
| 168 | }; |
| 169 | |
| 170 | &vpll1 { |
| 171 | regulator-name = "vpll1"; |
| 172 | regulator-min-microvolt = <1800000>; |
| 173 | regulator-max-microvolt = <1800000>; |
| 174 | }; |
| 175 | |
| 176 | &vpll2 { |
| 177 | regulator-name = "vpll2"; |
| 178 | regulator-min-microvolt = <1800000>; |
| 179 | regulator-max-microvolt = <1800000>; |
| 180 | }; |
| 181 | |
| 182 | &vaux1 { |
| 183 | regulator-name = "vaux1"; |
| 184 | regulator-min-microvolt = <2800000>; |
| 185 | regulator-max-microvolt = <2800000>; |
| 186 | }; |
| 187 | |
Sakari Ailus | 79f7f37 | 2014-05-04 03:23:08 +0300 | [diff] [blame] | 188 | /* CSI-2 receiver */ |
| 189 | &vaux2 { |
| 190 | regulator-name = "vaux2"; |
| 191 | regulator-min-microvolt = <1800000>; |
| 192 | regulator-max-microvolt = <1800000>; |
| 193 | }; |
| 194 | |
| 195 | /* Cameras */ |
| 196 | &vaux3 { |
| 197 | regulator-name = "vaux3"; |
| 198 | regulator-min-microvolt = <2800000>; |
| 199 | regulator-max-microvolt = <2800000>; |
| 200 | }; |
| 201 | |
Sebastian Reichel | 50413b9 | 2016-03-13 01:06:14 +0100 | [diff] [blame] | 202 | &vaux4 { |
| 203 | regulator-name = "vaux4"; |
| 204 | regulator-min-microvolt = <2800000>; |
| 205 | regulator-max-microvolt = <2800000>; |
| 206 | }; |
| 207 | |
| 208 | &vmmc1 { |
| 209 | regulator-name = "vmmc1"; |
| 210 | regulator-min-microvolt = <1850000>; |
| 211 | regulator-max-microvolt = <3150000>; |
| 212 | }; |
| 213 | |
| 214 | &vmmc2 { |
| 215 | regulator-name = "vmmc2"; |
| 216 | regulator-min-microvolt = <3000000>; |
| 217 | regulator-max-microvolt = <3000000>; |
| 218 | }; |
| 219 | |
| 220 | &vintana1 { |
| 221 | regulator-name = "vintana1"; |
| 222 | regulator-min-microvolt = <1500000>; |
| 223 | regulator-max-microvolt = <1500000>; |
| 224 | }; |
| 225 | |
| 226 | &vintana2 { |
| 227 | regulator-name = "vintana2"; |
| 228 | regulator-min-microvolt = <2750000>; |
| 229 | regulator-max-microvolt = <2750000>; |
| 230 | }; |
| 231 | |
| 232 | &vintdig { |
| 233 | regulator-name = "vintdig"; |
| 234 | regulator-min-microvolt = <1500000>; |
| 235 | regulator-max-microvolt = <1500000>; |
| 236 | }; |
| 237 | |
| 238 | &vsim { |
| 239 | regulator-name = "vsim"; |
| 240 | regulator-min-microvolt = <1800000>; |
| 241 | regulator-max-microvolt = <1800000>; |
| 242 | }; |
| 243 | |
| 244 | &vio { |
| 245 | regulator-name = "vio"; |
| 246 | regulator-min-microvolt = <1800000>; |
| 247 | regulator-max-microvolt = <1800000>; |
| 248 | }; |
| 249 | |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 250 | &i2c2 { |
| 251 | clock-frequency = <400000>; |
| 252 | }; |
| 253 | |
| 254 | &i2c3 { |
| 255 | clock-frequency = <400000>; |
Filip Matijević | 83faf92 | 2016-03-13 01:06:20 +0100 | [diff] [blame] | 256 | |
| 257 | lis302: lis302@1d { |
| 258 | compatible = "st,lis3lv02d"; |
| 259 | reg = <0x1d>; |
| 260 | |
| 261 | Vdd-supply = <&vaux1>; |
| 262 | Vdd_IO-supply = <&vio>; |
| 263 | |
| 264 | pinctrl-names = "default"; |
| 265 | pinctrl-0 = <&accelerator_pins>; |
| 266 | |
| 267 | interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */ |
| 268 | |
| 269 | /* click flags */ |
| 270 | st,click-single-x; |
| 271 | st,click-single-y; |
| 272 | st,click-single-z; |
| 273 | |
| 274 | /* Limits are 0.5g * value */ |
| 275 | st,click-threshold-x = <8>; |
| 276 | st,click-threshold-y = <8>; |
| 277 | st,click-threshold-z = <10>; |
| 278 | |
| 279 | /* Click must be longer than time limit */ |
| 280 | st,click-time-limit = <9>; |
| 281 | |
| 282 | /* Kind of debounce filter */ |
| 283 | st,click-latency = <50>; |
| 284 | |
| 285 | st,wakeup-x-hi; |
| 286 | st,wakeup-y-hi; |
| 287 | st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ |
| 288 | |
| 289 | st,wakeup2-z-hi; |
| 290 | st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */ |
| 291 | |
| 292 | st,highpass-cutoff-hz = <2>; |
| 293 | |
| 294 | /* Interrupt line 1 for thresholds */ |
| 295 | st,irq1-ff-wu-1; |
| 296 | st,irq1-ff-wu-2; |
| 297 | /* Interrupt line 2 for click detection */ |
| 298 | st,irq2-click; |
| 299 | |
| 300 | st,wu-duration-1 = <8>; |
| 301 | st,wu-duration-2 = <8>; |
| 302 | }; |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 303 | }; |
| 304 | |
| 305 | &mmc1 { |
| 306 | status = "disabled"; |
| 307 | }; |
| 308 | |
| 309 | &mmc2 { |
| 310 | pinctrl-names = "default"; |
| 311 | pinctrl-0 = <&mmc2_pins>; |
| 312 | vmmc-supply = <&vemmc>; |
| 313 | bus-width = <4>; |
| 314 | ti,non-removable; |
| 315 | }; |
| 316 | |
| 317 | &mmc3 { |
| 318 | status = "disabled"; |
| 319 | }; |
| 320 | |
| 321 | &usb_otg_hs { |
| 322 | interface-type = <0>; |
| 323 | usb-phy = <&usb2_phy>; |
| 324 | phys = <&usb2_phy>; |
| 325 | phy-names = "usb2-phy"; |
| 326 | mode = <3>; |
| 327 | power = <50>; |
| 328 | }; |
| 329 | |
| 330 | &gpmc { |
Tony Lindgren | e2c5eb7 | 2014-10-29 17:16:47 -0700 | [diff] [blame] | 331 | ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */ |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 332 | |
| 333 | onenand@0,0 { |
| 334 | #address-cells = <1>; |
| 335 | #size-cells = <1>; |
Tony Lindgren | e2c5eb7 | 2014-10-29 17:16:47 -0700 | [diff] [blame] | 336 | reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ |
Aaro Koskinen | df01318 | 2013-10-15 23:36:09 +0300 | [diff] [blame] | 337 | |
| 338 | gpmc,sync-read; |
| 339 | gpmc,sync-write; |
| 340 | gpmc,burst-length = <16>; |
| 341 | gpmc,burst-read; |
| 342 | gpmc,burst-wrap; |
| 343 | gpmc,burst-write; |
| 344 | gpmc,device-width = <2>; |
| 345 | gpmc,mux-add-data = <2>; |
| 346 | gpmc,cs-on-ns = <0>; |
| 347 | gpmc,cs-rd-off-ns = <87>; |
| 348 | gpmc,cs-wr-off-ns = <87>; |
| 349 | gpmc,adv-on-ns = <0>; |
| 350 | gpmc,adv-rd-off-ns = <10>; |
| 351 | gpmc,adv-wr-off-ns = <10>; |
| 352 | gpmc,oe-on-ns = <15>; |
| 353 | gpmc,oe-off-ns = <87>; |
| 354 | gpmc,we-on-ns = <0>; |
| 355 | gpmc,we-off-ns = <87>; |
| 356 | gpmc,rd-cycle-ns = <112>; |
| 357 | gpmc,wr-cycle-ns = <112>; |
| 358 | gpmc,access-ns = <81>; |
| 359 | gpmc,page-burst-access-ns = <15>; |
| 360 | gpmc,bus-turnaround-ns = <0>; |
| 361 | gpmc,cycle2cycle-delay-ns = <0>; |
| 362 | gpmc,wait-monitoring-ns = <0>; |
| 363 | gpmc,clk-activation-ns = <5>; |
| 364 | gpmc,wr-data-mux-bus-ns = <30>; |
| 365 | gpmc,wr-access-ns = <81>; |
| 366 | gpmc,sync-clk-ps = <15000>; |
| 367 | |
| 368 | /* |
| 369 | * MTD partition table corresponding to Nokia's MeeGo 1.2 |
| 370 | * Harmattan release. |
| 371 | */ |
| 372 | partition@0 { |
| 373 | label = "bootloader"; |
| 374 | reg = <0x00000000 0x00100000>; |
| 375 | }; |
| 376 | partition@1 { |
| 377 | label = "config"; |
| 378 | reg = <0x00100000 0x002c0000>; |
| 379 | }; |
| 380 | partition@2 { |
| 381 | label = "kernel"; |
| 382 | reg = <0x003c0000 0x01000000>; |
| 383 | }; |
| 384 | partition@3 { |
| 385 | label = "log"; |
| 386 | reg = <0x013c0000 0x00200000>; |
| 387 | }; |
| 388 | partition@4 { |
| 389 | label = "var"; |
| 390 | reg = <0x015c0000 0x1ca40000>; |
| 391 | }; |
| 392 | partition@5 { |
| 393 | label = "moslo"; |
| 394 | reg = <0x1e000000 0x02000000>; |
| 395 | }; |
| 396 | partition@6 { |
| 397 | label = "omap2-onenand"; |
| 398 | reg = <0x00000000 0x20000000>; |
| 399 | }; |
| 400 | }; |
| 401 | }; |
Sebastian Reichel | 3bec8c8 | 2016-01-17 16:49:06 +0100 | [diff] [blame] | 402 | |
| 403 | &ssi_port1 { |
Sebastian Reichel | 60fca6b | 2016-01-31 01:52:37 +0100 | [diff] [blame] | 404 | pinctrl-names = "default", "idle"; |
Sebastian Reichel | 3bec8c8 | 2016-01-17 16:49:06 +0100 | [diff] [blame] | 405 | pinctrl-0 = <&ssi_pins>; |
Sebastian Reichel | 60fca6b | 2016-01-31 01:52:37 +0100 | [diff] [blame] | 406 | pinctrl-1 = <&ssi_pins_idle>; |
Sebastian Reichel | 3bec8c8 | 2016-01-17 16:49:06 +0100 | [diff] [blame] | 407 | |
| 408 | ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ |
Sebastian Reichel | f21b987 | 2016-01-17 16:49:09 +0100 | [diff] [blame] | 409 | |
| 410 | modem: hsi-client { |
| 411 | pinctrl-names = "default"; |
| 412 | pinctrl-0 = <&modem_pins1 &modem_pins2>; |
| 413 | |
| 414 | hsi-channel-ids = <0>, <1>, <2>, <3>; |
| 415 | hsi-channel-names = "mcsaab-control", |
| 416 | "speech-control", |
| 417 | "speech-data", |
| 418 | "mcsaab-data"; |
| 419 | hsi-speed-kbps = <96000>; |
| 420 | hsi-mode = "frame"; |
| 421 | hsi-flow = "synchronized"; |
| 422 | hsi-arb-mode = "round-robin"; |
| 423 | |
| 424 | interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */ |
| 425 | |
| 426 | gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */ |
| 427 | <&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */ |
| 428 | <&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */ |
| 429 | gpio-names = "cmt_apeslpx", |
| 430 | "cmt_rst_rq", |
| 431 | "cmt_en"; |
| 432 | }; |
Sebastian Reichel | 3bec8c8 | 2016-01-17 16:49:06 +0100 | [diff] [blame] | 433 | }; |
| 434 | |
| 435 | &ssi_port2 { |
| 436 | status = "disabled"; |
| 437 | }; |