blob: 11dcb90bdfefaa8fa5f6d391f01c8ba0298465e7 [file] [log] [blame]
Ben Dooksb4975492008-07-03 12:32:51 +01001/* linux/drivers/serial/s3c2412.c
2 *
3 * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
4 *
5 * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
6 * http://armlinux.simtec.co.uk/
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#include <linux/module.h>
14#include <linux/ioport.h>
15#include <linux/io.h>
16#include <linux/platform_device.h>
17#include <linux/init.h>
18#include <linux/serial_core.h>
19#include <linux/serial.h>
20
21#include <asm/irq.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010022#include <mach/hardware.h>
Ben Dooksb4975492008-07-03 12:32:51 +010023
Ben Dooksa2b7ba92008-10-07 22:26:09 +010024#include <plat/regs-serial.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010025#include <mach/regs-gpio.h>
Ben Dooksb4975492008-07-03 12:32:51 +010026
27#include "samsung.h"
28
29static int s3c2412_serial_setsource(struct uart_port *port,
30 struct s3c24xx_uart_clksrc *clk)
31{
32 unsigned long ucon = rd_regl(port, S3C2410_UCON);
33
34 ucon &= ~S3C2412_UCON_CLKMASK;
35
36 if (strcmp(clk->name, "uclk") == 0)
37 ucon |= S3C2440_UCON_UCLK;
38 else if (strcmp(clk->name, "pclk") == 0)
39 ucon |= S3C2440_UCON_PCLK;
40 else if (strcmp(clk->name, "usysclk") == 0)
41 ucon |= S3C2412_UCON_USYSCLK;
42 else {
43 printk(KERN_ERR "unknown clock source %s\n", clk->name);
44 return -EINVAL;
45 }
46
47 wr_regl(port, S3C2410_UCON, ucon);
48 return 0;
49}
50
51
52static int s3c2412_serial_getsource(struct uart_port *port,
53 struct s3c24xx_uart_clksrc *clk)
54{
55 unsigned long ucon = rd_regl(port, S3C2410_UCON);
56
57 switch (ucon & S3C2412_UCON_CLKMASK) {
58 case S3C2412_UCON_UCLK:
59 clk->divisor = 1;
60 clk->name = "uclk";
61 break;
62
63 case S3C2412_UCON_PCLK:
64 case S3C2412_UCON_PCLK2:
65 clk->divisor = 1;
66 clk->name = "pclk";
67 break;
68
69 case S3C2412_UCON_USYSCLK:
70 clk->divisor = 1;
71 clk->name = "usysclk";
72 break;
73 }
74
75 return 0;
76}
77
78static int s3c2412_serial_resetport(struct uart_port *port,
79 struct s3c2410_uartcfg *cfg)
80{
81 unsigned long ucon = rd_regl(port, S3C2410_UCON);
82
83 dbg("%s: port=%p (%08lx), cfg=%p\n",
84 __func__, port, port->mapbase, cfg);
85
86 /* ensure we don't change the clock settings... */
87
88 ucon &= S3C2412_UCON_CLKMASK;
89
90 wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
91 wr_regl(port, S3C2410_ULCON, cfg->ulcon);
92
93 /* reset both fifos */
94
95 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
96 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
97
98 return 0;
99}
100
101static struct s3c24xx_uart_info s3c2412_uart_inf = {
102 .name = "Samsung S3C2412 UART",
103 .type = PORT_S3C2412,
104 .fifosize = 64,
105 .rx_fifomask = S3C2440_UFSTAT_RXMASK,
106 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
107 .rx_fifofull = S3C2440_UFSTAT_RXFULL,
108 .tx_fifofull = S3C2440_UFSTAT_TXFULL,
109 .tx_fifomask = S3C2440_UFSTAT_TXMASK,
110 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
111 .get_clksrc = s3c2412_serial_getsource,
112 .set_clksrc = s3c2412_serial_setsource,
113 .reset_port = s3c2412_serial_resetport,
114};
115
116/* device management */
117
118static int s3c2412_serial_probe(struct platform_device *dev)
119{
120 dbg("s3c2440_serial_probe: dev=%p\n", dev);
121 return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
122}
123
124static struct platform_driver s3c2412_serial_drv = {
125 .probe = s3c2412_serial_probe,
Peter Korsgaard90ceb9642009-06-22 18:42:49 +0100126 .remove = __devexit_p(s3c24xx_serial_remove),
Ben Dooksb4975492008-07-03 12:32:51 +0100127 .driver = {
128 .name = "s3c2412-uart",
129 .owner = THIS_MODULE,
130 },
131};
132
133s3c24xx_console_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
134
135static inline int s3c2412_serial_init(void)
136{
137 return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
138}
139
140static inline void s3c2412_serial_exit(void)
141{
142 platform_driver_unregister(&s3c2412_serial_drv);
143}
144
145module_init(s3c2412_serial_init);
146module_exit(s3c2412_serial_exit);
147
148MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver");
149MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
150MODULE_LICENSE("GPL v2");
151MODULE_ALIAS("platform:s3c2412-uart");