| Kumar Gala | b053dc5 | 2009-06-19 08:31:05 -0500 | [diff] [blame] | 1 | USB EHCI controllers |
| 2 | |
| 3 | Required properties: |
| Hans de Goede | 915974c | 2014-02-11 17:35:29 +0100 | [diff] [blame^] | 4 | - compatible : should be "generic-ehci". |
| Kumar Gala | b053dc5 | 2009-06-19 08:31:05 -0500 | [diff] [blame] | 5 | - reg : should contain at least address and length of the standard EHCI |
| 6 | register set for the device. Optional platform-dependent registers |
| 7 | (debug-port or other) can be also specified here, but only after |
| 8 | definition of standard EHCI registers. |
| 9 | - interrupts : one EHCI interrupt should be described here. |
| Hans de Goede | a4aeb21 | 2014-02-07 16:36:41 +0100 | [diff] [blame] | 10 | |
| 11 | Optional properties: |
| 12 | - big-endian-regs : boolean, set this for hcds with big-endian registers |
| 13 | - big-endian-desc : boolean, set this for hcds with big-endian descriptors |
| 14 | - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc |
| 15 | - clocks : a list of phandle + clock specifier pairs |
| 16 | - phys : phandle + phy specifier pair |
| 17 | - phy-names : "usb" |
| Kumar Gala | b053dc5 | 2009-06-19 08:31:05 -0500 | [diff] [blame] | 18 | |
| 19 | Example (Sequoia 440EPx): |
| 20 | ehci@e0000300 { |
| 21 | compatible = "ibm,usb-ehci-440epx", "usb-ehci"; |
| 22 | interrupt-parent = <&UIC0>; |
| 23 | interrupts = <1a 4>; |
| 24 | reg = <0 e0000300 90 0 e0000390 70>; |
| 25 | big-endian; |
| 26 | }; |
| Hans de Goede | a4aeb21 | 2014-02-07 16:36:41 +0100 | [diff] [blame] | 27 | |
| 28 | Example (Allwinner sun4i A10 SoC): |
| 29 | ehci0: usb@01c14000 { |
| Hans de Goede | 915974c | 2014-02-11 17:35:29 +0100 | [diff] [blame^] | 30 | compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; |
| Hans de Goede | a4aeb21 | 2014-02-07 16:36:41 +0100 | [diff] [blame] | 31 | reg = <0x01c14000 0x100>; |
| 32 | interrupts = <39>; |
| 33 | clocks = <&ahb_gates 1>; |
| 34 | phys = <&usbphy 1>; |
| 35 | phy-names = "usb"; |
| 36 | }; |