blob: a9f106a2bd2c15f9a26e80f70beb6c7c7bda1a13 [file] [log] [blame]
Andrew Victor2f036ac2008-04-15 21:10:11 +01001/*
2 * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
3 * Copyright (C) 2007 emQbit.com.
4 *
5 * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27#include <linux/spi/spi.h>
28#include <linux/spi/flash.h>
29
Russell Kinga09e64f2008-08-05 16:14:15 +010030#include <mach/hardware.h>
Andrew Victor2f036ac2008-04-15 21:10:11 +010031#include <asm/setup.h>
32#include <asm/mach-types.h>
33#include <asm/irq.h>
34
35#include <asm/mach/arch.h>
36#include <asm/mach/map.h>
37#include <asm/mach/irq.h>
38
Russell Kinga09e64f2008-08-05 16:14:15 +010039#include <mach/board.h>
40#include <mach/gpio.h>
Jean-Christophe PLAGNIOL-VILLARDe57556e32011-04-24 11:40:22 +080041#include <mach/cpu.h>
Andrew Victor2f036ac2008-04-15 21:10:11 +010042
43#include "generic.h"
44
45
Jean-Christophe PLAGNIOL-VILLARD1b021a32011-04-28 20:19:32 +080046static void __init ecb_at91init_early(void)
Andrew Victor2f036ac2008-04-15 21:10:11 +010047{
Jean-Christophe PLAGNIOL-VILLARDe57556e32011-04-24 11:40:22 +080048 /* Set cpu type: PQFP */
49 at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
50
Andrew Victor2f036ac2008-04-15 21:10:11 +010051 /* Initialize processor: 18.432 MHz crystal */
Jean-Christophe PLAGNIOL-VILLARD21d08b92011-04-23 15:28:34 +080052 at91_initialize(18432000);
Andrew Victor2f036ac2008-04-15 21:10:11 +010053
54 /* Setup the LEDs */
55 at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
56
57 /* DBGU on ttyS0. (Rx & Tx only) */
58 at91_register_uart(0, 0, 0);
59
60 /* USART0 on ttyS1. (Rx & Tx only) */
61 at91_register_uart(AT91RM9200_ID_US0, 1, 0);
62
63 /* set serial console to ttyS0 (ie, DBGU) */
64 at91_set_serial_console(0);
65}
66
67static void __init ecb_at91init_irq(void)
68{
69 at91rm9200_init_interrupts(NULL);
70}
71
72static struct at91_eth_data __initdata ecb_at91eth_data = {
73 .phy_irq_pin = AT91_PIN_PC4,
74 .is_rmii = 0,
75};
76
77static struct at91_usbh_data __initdata ecb_at91usbh_data = {
78 .ports = 1,
79};
80
81static struct at91_mmc_data __initdata ecb_at91mmc_data = {
82 .slot_b = 0,
83 .wire4 = 1,
84};
85
86
87#if defined(CONFIG_MTD_DATAFLASH)
88static struct mtd_partition __initdata my_flash0_partitions[] =
89{
90 { /* 0x8400 */
91 .name = "Darrell-loader",
92 .offset = 0,
Andrew Victore5052402008-09-21 21:30:02 +010093 .size = 12 * 1056,
Andrew Victor2f036ac2008-04-15 21:10:11 +010094 },
95 {
96 .name = "U-boot",
97 .offset = MTDPART_OFS_NXTBLK,
98 .size = 110 * 1056,
99 },
100 { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
101 .name = "UBoot-env",
102 .offset = MTDPART_OFS_NXTBLK,
103 .size = 8 * 1056,
104 },
105 { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
106 .name = "Kernel",
107 .offset = MTDPART_OFS_NXTBLK,
108 .size = 1534 * 1056,
109 },
110 { /* 190200 - jffs2 root filesystem */
111 .name = "Filesystem",
112 .offset = MTDPART_OFS_NXTBLK,
113 .size = MTDPART_SIZ_FULL, /* 26 sectors */
114 }
115};
116
117static struct flash_platform_data __initdata my_flash0_platform = {
118 .name = "Removable flash card",
119 .parts = my_flash0_partitions,
120 .nr_parts = ARRAY_SIZE(my_flash0_partitions)
121};
122
123#endif
124
125static struct spi_board_info __initdata ecb_at91spi_devices[] = {
126 { /* DataFlash chip */
127 .modalias = "mtd_dataflash",
128 .chip_select = 0,
129 .max_speed_hz = 10 * 1000 * 1000,
130 .bus_num = 0,
131#if defined(CONFIG_MTD_DATAFLASH)
132 .platform_data = &my_flash0_platform,
133#endif
134 },
Uwe Kleine-Königb5950762010-11-01 15:38:34 -0400135 { /* User accessible spi - cs1 (250KHz) */
Andrew Victor2f036ac2008-04-15 21:10:11 +0100136 .modalias = "spi-cs1",
137 .chip_select = 1,
138 .max_speed_hz = 250 * 1000,
139 },
Uwe Kleine-Königb5950762010-11-01 15:38:34 -0400140 { /* User accessible spi - cs2 (1MHz) */
Andrew Victor2f036ac2008-04-15 21:10:11 +0100141 .modalias = "spi-cs2",
142 .chip_select = 2,
143 .max_speed_hz = 1 * 1000 * 1000,
144 },
Uwe Kleine-Königb5950762010-11-01 15:38:34 -0400145 { /* User accessible spi - cs3 (10MHz) */
Andrew Victor2f036ac2008-04-15 21:10:11 +0100146 .modalias = "spi-cs3",
147 .chip_select = 3,
148 .max_speed_hz = 10 * 1000 * 1000,
149 },
150};
151
152static void __init ecb_at91board_init(void)
153{
154 /* Serial */
155 at91_add_device_serial();
156
157 /* Ethernet */
158 at91_add_device_eth(&ecb_at91eth_data);
159
160 /* USB Host */
161 at91_add_device_usbh(&ecb_at91usbh_data);
162
163 /* I2C */
164 at91_add_device_i2c(NULL, 0);
165
166 /* MMC */
167 at91_add_device_mmc(0, &ecb_at91mmc_data);
168
169 /* SPI */
170 at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
171}
172
173MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
174 /* Maintainer: emQbit.com */
Andrew Victor2f036ac2008-04-15 21:10:11 +0100175 .timer = &at91rm9200_timer,
Jean-Christophe PLAGNIOL-VILLARD21d08b92011-04-23 15:28:34 +0800176 .map_io = at91_map_io,
Jean-Christophe PLAGNIOL-VILLARD1b021a32011-04-28 20:19:32 +0800177 .init_early = ecb_at91init_early,
Andrew Victor2f036ac2008-04-15 21:10:11 +0100178 .init_irq = ecb_at91init_irq,
179 .init_machine = ecb_at91board_init,
180MACHINE_END