blob: fa3243d71c76d0b9f14dde9066a2bff60a18165c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Character device configuration
3#
4
5menu "Character devices"
6
Greg Kroah-Hartmanbdcffc52011-02-22 15:41:47 -08007source "drivers/tty/Kconfig"
Antonino A. Daplas13ae6642006-06-26 00:27:12 -07008
Arjan van de Venb781ecb2008-04-29 00:58:34 -07009config DEVKMEM
10 bool "/dev/kmem virtual device support"
11 default y
12 help
13 Say Y here if you want to support the /dev/kmem device. The
14 /dev/kmem device is rarely used, but can be used for certain
15 kind of kernel debugging operations.
16 When in doubt, say "N".
17
Linus Torvalds1da177e2005-04-16 15:20:36 -070018config SGI_SNSC
19 bool "SGI Altix system controller communication support"
20 depends on (IA64_SGI_SN2 || IA64_GENERIC)
21 help
22 If you have an SGI Altix and you want to enable system
23 controller communication from user space (you want this!),
24 say Y. Otherwise, say N.
25
Bruce Losuree1e19742005-04-25 13:09:41 -070026config SGI_TIOCX
27 bool "SGI TIO CX driver support"
28 depends on (IA64_SGI_SN2 || IA64_GENERIC)
29 help
30 If you have an SGI Altix and you have fpga devices attached
31 to your TIO, say Y here, otherwise say N.
32
33config SGI_MBCS
34 tristate "SGI FPGA Core Services driver support"
Bruce Losureae40aae2005-04-04 13:23:00 -070035 depends on SGI_TIOCX
Bruce Losuree1e19742005-04-25 13:09:41 -070036 help
37 If you have an SGI Altix with an attached SABrick
38 say Y or M here, otherwise say N.
39
Greg Kroah-Hartmanab4382d2011-01-13 12:10:18 -080040source "drivers/tty/serial/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -070041
Samo Pogacnik24b4b672010-08-25 20:44:07 +020042config TTY_PRINTK
43 bool "TTY driver to output user messages via printk"
Joe Millenbach4f73bc42013-01-17 22:44:22 -080044 depends on EXPERT && TTY
Samo Pogacnik24b4b672010-08-25 20:44:07 +020045 default n
46 ---help---
47 If you say Y here, the support for writing user messages (i.e.
48 console messages) via printk is available.
49
50 The feature is useful to inline user messages with kernel
51 messages.
52 In order to use this feature, you should output user messages
53 to /dev/ttyprintk or redirect console to this TTY.
54
55 If unsure, say N.
56
Mike Frysinger2dc63a82008-04-25 08:04:56 +080057config BFIN_OTP
58 tristate "Blackfin On-Chip OTP Memory Support"
Mike Frysingerf69b2d72009-11-20 19:09:56 +000059 depends on BLACKFIN && (BF51x || BF52x || BF54x)
Mike Frysinger2dc63a82008-04-25 08:04:56 +080060 default y
61 help
62 If you say Y here, you will get support for a character device
63 interface into the One Time Programmable memory pages that are
64 stored on the Blackfin processor. This will not get you access
65 to the secure memory pages however. You will need to write your
66 own secure code and reader for that.
67
68 To compile this driver as a module, choose M here: the module
69 will be called bfin-otp.
70
71 If unsure, it is safe to say Y.
72
73config BFIN_OTP_WRITE_ENABLE
74 bool "Enable writing support of OTP pages"
75 depends on BFIN_OTP
76 default n
77 help
78 If you say Y here, you will enable support for writing of the
79 OTP pages. This is dangerous by nature as you can only program
80 the pages once, so only enable this option when you actually
81 need it so as to not inadvertently clobber data.
82
83 If unsure, say N.
84
Linus Torvalds1da177e2005-04-16 15:20:36 -070085config PRINTER
86 tristate "Parallel printer support"
87 depends on PARPORT
88 ---help---
89 If you intend to attach a printer to the parallel port of your Linux
90 box (as opposed to using a serial printer; if the connector at the
91 printer has 9 or 25 holes ["female"], then it's serial), say Y.
92 Also read the Printing-HOWTO, available from
93 <http://www.tldp.org/docs.html#howto>.
94
95 It is possible to share one parallel port among several devices
96 (e.g. printer and ZIP drive) and it is safe to compile the
97 corresponding drivers into the kernel.
98
99 To compile this driver as a module, choose M here and read
100 <file:Documentation/parport.txt>. The module will be called lp.
101
102 If you have several parallel ports, you can specify which ports to
103 use with the "lp" kernel command line option. (Try "man bootparam"
104 or see the documentation of your boot loader (lilo or loadlin) about
105 how to pass options to the kernel at boot time.) The syntax of the
106 "lp" command line option can be found in <file:drivers/char/lp.c>.
107
108 If you have more than 8 printers, you need to increase the LP_NO
109 macro in lp.c and the PARPORT_MAX macro in parport.h.
110
111config LP_CONSOLE
112 bool "Support for console on line printer"
113 depends on PRINTER
114 ---help---
115 If you want kernel messages to be printed out as they occur, you
116 can have a console on the printer. This option adds support for
117 doing that; to actually get it to happen you need to pass the
118 option "console=lp0" to the kernel at boot time.
119
120 If the printer is out of paper (or off, or unplugged, or too
121 busy..) the kernel will stall until the printer is ready again.
122 By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
123 can make the kernel continue when this happens,
124 but it'll lose the kernel messages.
125
126 If unsure, say N.
127
128config PPDEV
129 tristate "Support for user-space parallel port device drivers"
130 depends on PARPORT
131 ---help---
132 Saying Y to this adds support for /dev/parport device nodes. This
133 is needed for programs that want portable access to the parallel
134 port, for instance deviceid (which displays Plug-and-Play device
135 IDs).
136
137 This is the parallel port equivalent of SCSI generic support (sg).
138 It is safe to say N to this -- it is not needed for normal printing
139 or parallel port CD-ROM/disk support.
140
141 To compile this driver as a module, choose M here: the
142 module will be called ppdev.
143
144 If unsure, say N.
145
Greg Kroah-Hartmanbdcffc52011-02-22 15:41:47 -0800146source "drivers/tty/hvc/Kconfig"
Mike Frysinger5427bcf2011-02-04 20:45:49 -0500147
Rusty Russell31610432007-10-22 11:03:39 +1000148config VIRTIO_CONSOLE
Christian Borntraeger7721c492008-07-25 12:06:06 -0500149 tristate "Virtio console"
Joe Millenbach4f73bc42013-01-17 22:44:22 -0800150 depends on VIRTIO && TTY
Rusty Russell31610432007-10-22 11:03:39 +1000151 select HVC_DRIVER
Christian Borntraeger7721c492008-07-25 12:06:06 -0500152 help
153 Virtio console for use with lguest and other hypervisors.
154
Amit Shahfb08bd22009-12-21 21:36:04 +0530155 Also serves as a general-purpose serial device for data
156 transfer between the guest and host. Character devices at
157 /dev/vportNpn will be created when corresponding ports are
158 found, where N is the device number and n is the port number
159 within that device. If specified by the host, a sysfs
160 attribute called 'name' will be populated with a name for
161 the port which can be used by udev scripts to create a
162 symlink to the device.
Rusty Russell31610432007-10-22 11:03:39 +1000163
Sonny Raofe9e8d52008-07-08 15:45:11 +1000164config IBM_BSR
165 tristate "IBM POWER Barrier Synchronization Register support"
166 depends on PPC_PSERIES
167 help
168 This devices exposes a hardware mechanism for fast synchronization
169 of threads across a large system which avoids bouncing a cacheline
170 between several cores on a system
171
Linus Torvalds1da177e2005-04-16 15:20:36 -0700172source "drivers/char/ipmi/Kconfig"
173
Linus Torvalds1da177e2005-04-16 15:20:36 -0700174config DS1620
175 tristate "NetWinder thermometer support"
176 depends on ARCH_NETWINDER
177 help
178 Say Y here to include support for the thermal management hardware
179 found in the NetWinder. This driver allows the user to control the
180 temperature set points and to read the current temperature.
181
182 It is also possible to say M here to build it as a module (ds1620)
183 It is recommended to be used on a NetWinder, but it is not a
184 necessity.
185
186config NWBUTTON
187 tristate "NetWinder Button"
188 depends on ARCH_NETWINDER
189 ---help---
190 If you say Y here and create a character device node /dev/nwbutton
191 with major and minor numbers 10 and 158 ("man mknod"), then every
192 time the orange button is pressed a number of times, the number of
193 times the button was pressed will be written to that device.
194
195 This is most useful for applications, as yet unwritten, which
196 perform actions based on how many times the button is pressed in a
197 row.
198
199 Do not hold the button down for too long, as the driver does not
200 alter the behaviour of the hardware reset circuitry attached to the
201 button; it will still execute a hard reset if the button is held
202 down for longer than approximately five seconds.
203
204 To compile this driver as a module, choose M here: the
205 module will be called nwbutton.
206
207 Most people will answer Y to this question and "Reboot Using Button"
208 below to be able to initiate a system shutdown from the button.
209
210config NWBUTTON_REBOOT
211 bool "Reboot Using Button"
212 depends on NWBUTTON
213 help
214 If you say Y here, then you will be able to initiate a system
215 shutdown and reboot by pressing the orange button a number of times.
216 The number of presses to initiate the shutdown is two by default,
217 but this can be altered by modifying the value of NUM_PRESSES_REBOOT
218 in nwbutton.h and recompiling the driver or, if you compile the
219 driver as a module, you can specify the number of presses at load
220 time with "insmod button reboot_count=<something>".
221
222config NWFLASH
223 tristate "NetWinder flash support"
224 depends on ARCH_NETWINDER
225 ---help---
226 If you say Y here and create a character device /dev/flash with
227 major 10 and minor 160 you can manipulate the flash ROM containing
228 the NetWinder firmware. Be careful as accidentally overwriting the
229 flash contents can render your computer unbootable. On no account
230 allow random users access to this device. :-)
231
232 To compile this driver as a module, choose M here: the
233 module will be called nwflash.
234
235 If you're not sure, say N.
236
Michael Buesch844dd052006-06-26 00:24:59 -0700237source "drivers/char/hw_random/Kconfig"
238
Linus Torvalds1da177e2005-04-16 15:20:36 -0700239config NVRAM
240 tristate "/dev/nvram support"
Uwe Kleine-König807a96c2009-01-31 01:21:59 +0100241 depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242 ---help---
243 If you say Y here and create a character special file /dev/nvram
244 with major number 10 and minor number 144 using mknod ("man mknod"),
245 you get read and write access to the extra bytes of non-volatile
246 memory in the real time clock (RTC), which is contained in every PC
247 and most Ataris. The actual number of bytes varies, depending on the
248 nvram in the system, but is usually 114 (128-14 for the RTC).
249
250 This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
251 on Ataris. /dev/nvram may be used to view settings there, or to
252 change them (with some utility). It could also be used to frequently
253 save a few bits of very important data that may not be lost over
254 power-off and for which writing to disk is too insecure. Note
255 however that most NVRAM space in a PC belongs to the BIOS and you
256 should NEVER idly tamper with it. See Ralf Brown's interrupt list
257 for a guide to the use of CMOS bytes by your BIOS.
258
259 On Atari machines, /dev/nvram is always configured and does not need
260 to be selected.
261
262 To compile this driver as a module, choose M here: the
263 module will be called nvram.
264
David Brownellc7500902008-04-28 02:11:52 -0700265#
266# These legacy RTC drivers just cause too many conflicts with the generic
267# RTC framework ... let's not even try to coexist any more.
268#
269if RTC_LIB=n
270
Linus Torvalds1da177e2005-04-16 15:20:36 -0700271config RTC
David Brownelle6d2bb22008-06-12 15:21:55 -0700272 tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
David Brownellc7500902008-04-28 02:11:52 -0700273 depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
Al Viro33694652011-08-18 20:11:59 +0100274 && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN && !UML
Linus Torvalds1da177e2005-04-16 15:20:36 -0700275 ---help---
276 If you say Y here and create a character special file /dev/rtc with
277 major number 10 and minor number 135 using mknod ("man mknod"), you
278 will get access to the real time clock (or hardware clock) built
279 into your computer.
280
281 Every PC has such a clock built in. It can be used to generate
282 signals from as low as 1Hz up to 8192Hz, and can also be used
283 as a 24 hour alarm. It reports status information via the file
284 /proc/driver/rtc and its behaviour is set by various ioctls on
285 /dev/rtc.
286
287 If you run Linux on a multiprocessor machine and said Y to
288 "Symmetric Multi Processing" above, you should say Y here to read
289 and set the RTC in an SMP compatible fashion.
290
291 If you think you have a use for such a device (such as periodic data
292 sampling), then say Y here, and read <file:Documentation/rtc.txt>
293 for details.
294
295 To compile this driver as a module, choose M here: the
296 module will be called rtc.
297
Al Viro22405982007-07-22 00:37:48 -0700298config JS_RTC
299 tristate "Enhanced Real Time Clock Support"
300 depends on SPARC32 && PCI
301 ---help---
302 If you say Y here and create a character special file /dev/rtc with
303 major number 10 and minor number 135 using mknod ("man mknod"), you
304 will get access to the real time clock (or hardware clock) built
305 into your computer.
306
307 Every PC has such a clock built in. It can be used to generate
308 signals from as low as 1Hz up to 8192Hz, and can also be used
309 as a 24 hour alarm. It reports status information via the file
310 /proc/driver/rtc and its behaviour is set by various ioctls on
311 /dev/rtc.
312
313 If you think you have a use for such a device (such as periodic data
314 sampling), then say Y here, and read <file:Documentation/rtc.txt>
315 for details.
316
317 To compile this driver as a module, choose M here: the
318 module will be called js-rtc.
319
Linus Torvalds1da177e2005-04-16 15:20:36 -0700320config GEN_RTC
321 tristate "Generic /dev/rtc emulation"
Al Viro33694652011-08-18 20:11:59 +0100322 depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN && !UML
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323 ---help---
324 If you say Y here and create a character special file /dev/rtc with
325 major number 10 and minor number 135 using mknod ("man mknod"), you
326 will get access to the real time clock (or hardware clock) built
327 into your computer.
328
329 It reports status information via the file /proc/driver/rtc and its
330 behaviour is set by various ioctls on /dev/rtc. If you enable the
331 "extended RTC operation" below it will also provide an emulation
332 for RTC_UIE which is required by some programs and may improve
333 precision in some cases.
334
335 To compile this driver as a module, choose M here: the
336 module will be called genrtc.
337
338config GEN_RTC_X
339 bool "Extended RTC operation"
340 depends on GEN_RTC
341 help
342 Provides an emulation for RTC_UIE which is required by some programs
343 and may improve precision of the generic RTC support in some cases.
344
345config EFI_RTC
346 bool "EFI Real Time Clock Services"
347 depends on IA64
348
349config DS1302
350 tristate "DS1302 RTC support"
351 depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT)
352 help
353 If you say Y here and create a character special file /dev/rtc with
354 major number 121 and minor number 0 using mknod ("man mknod"), you
355 will get access to the real time clock (or hardware clock) built
356 into your computer.
357
David Brownellc7500902008-04-28 02:11:52 -0700358endif # RTC_LIB
359
Linus Torvalds1da177e2005-04-16 15:20:36 -0700360config DTLK
361 tristate "Double Talk PC internal speech card support"
Martin Schwidefskyeeca7a32007-05-10 15:45:56 +0200362 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363 help
364 This driver is for the DoubleTalk PC, a speech synthesizer
365 manufactured by RC Systems (<http://www.rcsys.com/>). It is also
366 called the `internal DoubleTalk'.
367
368 To compile this driver as a module, choose M here: the
369 module will be called dtlk.
370
Stephen Neuendorfferef141a02008-02-06 04:24:09 +1100371config XILINX_HWICAP
372 tristate "Xilinx HWICAP Support"
Michal Simek6fa612b2009-05-11 15:49:12 +0200373 depends on XILINX_VIRTEX || MICROBLAZE
Stephen Neuendorfferef141a02008-02-06 04:24:09 +1100374 help
375 This option enables support for Xilinx Internal Configuration
376 Access Port (ICAP) driver. The ICAP is used on Xilinx Virtex
377 FPGA platforms to partially reconfigure the FPGA at runtime.
378
379 If unsure, say N.
380
Linus Torvalds1da177e2005-04-16 15:20:36 -0700381config R3964
382 tristate "Siemens R3964 line discipline"
Joe Millenbach4f73bc42013-01-17 22:44:22 -0800383 depends on TTY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700384 ---help---
385 This driver allows synchronous communication with devices using the
386 Siemens R3964 packet protocol. Unless you are dealing with special
387 hardware like PLCs, you are unlikely to need this.
388
389 To compile this driver as a module, choose M here: the
390 module will be called n_r3964.
391
392 If unsure, say N.
393
394config APPLICOM
395 tristate "Applicom intelligent fieldbus card support"
396 depends on PCI
397 ---help---
398 This driver provides the kernel-side support for the intelligent
399 fieldbus cards made by Applicom International. More information
400 about these cards can be found on the WWW at the address
401 <http://www.applicom-int.com/>, or by email from David Woodhouse
402 <dwmw2@infradead.org>.
403
404 To compile this driver as a module, choose M here: the
405 module will be called applicom.
406
407 If unsure, say N.
408
409config SONYPI
Greg Kroah-Hartman65929212012-09-18 16:14:53 +0100410 tristate "Sony Vaio Programmable I/O Control Device support"
411 depends on X86 && PCI && INPUT && !64BIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412 ---help---
413 This driver enables access to the Sony Programmable I/O Control
414 Device which can be found in many (all ?) Sony Vaio laptops.
415
416 If you have one of those laptops, read
Carlos Corbacho018a6512008-02-09 01:32:19 +0000417 <file:Documentation/laptops/sonypi.txt>, and say Y or M here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418
419 To compile this driver as a module, choose M here: the
420 module will be called sonypi.
421
Yoichi Yuasa09762512007-05-06 14:51:58 -0700422config GPIO_TB0219
423 tristate "TANBAC TB0219 GPIO support"
Robert P. J. Daybef1f402006-12-12 20:04:19 +0100424 depends on TANBAC_TB022X
Yoichi Yuasa584e1232006-06-25 05:49:11 -0700425 select GPIO_VR41XX
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426
Linus Torvalds1da177e2005-04-16 15:20:36 -0700427source "drivers/char/pcmcia/Kconfig"
428
429config MWAVE
430 tristate "ACP Modem (Mwave) support"
Joe Millenbach4f73bc42013-01-17 22:44:22 -0800431 depends on X86 && TTY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700432 select SERIAL_8250
433 ---help---
434 The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
435 kernel driver and a user level application. Together these components
436 support direct attachment to public switched telephone networks (PSTNs)
437 and support selected world wide countries.
438
439 This version of the ACP Modem driver supports the IBM Thinkpad 600E,
440 600, and 770 that include on board ACP modem hardware.
441
442 The modem also supports the standard communications port interface
443 (ttySx) and is compatible with the Hayes AT Command Set.
444
445 The user level application needed to use this driver can be found at
446 the IBM Linux Technology Center (LTC) web site:
447 <http://www.ibm.com/linux/ltc/>.
448
449 If you own one of the above IBM Thinkpads which has the Mwave chipset
450 in it, say Y.
451
452 To compile this driver as a module, choose M here: the
453 module will be called mwave.
454
455config SCx200_GPIO
456 tristate "NatSemi SCx200 GPIO Support"
457 depends on SCx200
Jim Cromie7a8e2a52006-06-27 02:54:27 -0700458 select NSC_GPIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700459 help
460 Give userspace access to the GPIO pins on the National
461 Semiconductor SCx200 processors.
462
463 If compiled as a module, it will be called scx200_gpio.
464
Jim Cromie7a8e2a52006-06-27 02:54:27 -0700465config PC8736x_GPIO
466 tristate "NatSemi PC8736x GPIO Support"
Al Viro33694652011-08-18 20:11:59 +0100467 depends on X86_32 && !UML
Jim Cromie7a8e2a52006-06-27 02:54:27 -0700468 default SCx200_GPIO # mostly N
469 select NSC_GPIO # needed for support routines
470 help
471 Give userspace access to the GPIO pins on the National
472 Semiconductor PC-8736x (x=[03456]) SuperIO chip. The chip
473 has multiple functional units, inc several managed by
474 hwmon/pc87360 driver. Tested with PC-87366
475
476 If compiled as a module, it will be called pc8736x_gpio.
477
478config NSC_GPIO
479 tristate "NatSemi Base GPIO Support"
Dave Jones699352c2006-06-29 02:24:32 -0700480 depends on X86_32
Jim Cromie7a8e2a52006-06-27 02:54:27 -0700481 # selected by SCx200_GPIO and PC8736x_GPIO
482 # what about 2 selectors differing: m != y
483 help
484 Common support used (and needed) by scx200_gpio and
485 pc8736x_gpio drivers. If those drivers are built as
486 modules, this one will be too, named nsc_gpio
487
Linus Torvalds1da177e2005-04-16 15:20:36 -0700488config RAW_DRIVER
Dave Jonesabd4aa52007-07-15 23:40:49 -0700489 tristate "RAW driver (/dev/raw/rawN)"
David Howells93614012006-09-30 20:45:40 +0200490 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700491 help
Dave Jonesabd4aa52007-07-15 23:40:49 -0700492 The raw driver permits block devices to be bound to /dev/raw/rawN.
493 Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700494 See the raw(8) manpage for more details.
495
Dave Jonesabd4aa52007-07-15 23:40:49 -0700496 Applications should preferably open the device (eg /dev/hda1)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700497 with the O_DIRECT flag.
498
Andrew Morton0de502a2005-12-12 00:37:41 -0800499config MAX_RAW_DEVS
Jan Kara0078bff2011-04-29 00:24:29 +0200500 int "Maximum number of RAW devices to support (1-65536)"
Andrew Morton0de502a2005-12-12 00:37:41 -0800501 depends on RAW_DRIVER
502 default "256"
503 help
504 The maximum number of RAW devices that are supported.
505 Default is 256. Increase this number in case you need lots of
506 raw devices.
507
Linus Torvalds1da177e2005-04-16 15:20:36 -0700508config HPET
509 bool "HPET - High Precision Event Timer" if (X86 || IA64)
510 default n
511 depends on ACPI
512 help
513 If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
514 open selects one of the timers supported by the HPET. The timers are
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +0100515 non-periodic and/or periodic.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516
Linus Torvalds1da177e2005-04-16 15:20:36 -0700517config HPET_MMAP
518 bool "Allow mmap of HPET"
519 default y
520 depends on HPET
521 help
522 If you say Y here, user applications will be able to mmap
523 the HPET registers.
524
Prarit Bhargava3d035f52013-11-12 15:08:33 -0800525config HPET_MMAP_DEFAULT
526 bool "Enable HPET MMAP access by default"
527 default y
528 depends on HPET_MMAP
529 help
Linus Torvalds1da177e2005-04-16 15:20:36 -0700530 In some hardware implementations, the page containing HPET
531 registers may also contain other things that shouldn't be
Prarit Bhargava3d035f52013-11-12 15:08:33 -0800532 exposed to the user. This option selects the default (if
533 kernel parameter hpet_mmap is not set) user access to the
534 registers for applications that require it.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700535
Linus Torvalds1da177e2005-04-16 15:20:36 -0700536config HANGCHECK_TIMER
537 tristate "Hangcheck timer"
Martin Schwidefskyabf3ea12007-05-10 15:45:59 +0200538 depends on X86 || IA64 || PPC64 || S390
Linus Torvalds1da177e2005-04-16 15:20:36 -0700539 help
540 The hangcheck-timer module detects when the system has gone
541 out to lunch past a certain margin. It can reboot the system
542 or merely print a warning.
543
544config MMTIMER
545 tristate "MMTIMER Memory mapped RTC for SGI Altix"
546 depends on IA64_GENERIC || IA64_SGI_SN2
547 default y
548 help
549 The mmtimer device allows direct userspace access to the
550 Altix system timer.
551
Dimitri Sivanichfbd8ae12009-09-23 15:57:15 -0700552config UV_MMTIMER
553 tristate "UV_MMTIMER Memory mapped RTC for SGI UV"
554 depends on X86_UV
555 default m
556 help
557 The uv_mmtimer device allows direct userspace access to the
558 UV system timer.
559
Linus Torvalds1da177e2005-04-16 15:20:36 -0700560source "drivers/char/tpm/Kconfig"
561
Mark Gross1a80ba82005-10-30 15:02:55 -0800562config TELCLOCK
Mark Gross03154a22007-03-06 13:58:45 -0800563 tristate "Telecom clock driver for ATCA SBC"
Greg Kroah-Hartman65929212012-09-18 16:14:53 +0100564 depends on X86
Mark Gross1a80ba82005-10-30 15:02:55 -0800565 default n
566 help
Mark Gross03154a22007-03-06 13:58:45 -0800567 The telecom clock device is specific to the MPCBL0010 and MPCBL0050
568 ATCA computers and allows direct userspace access to the
569 configuration of the telecom clock configuration settings. This
570 device is used for hardware synchronization across the ATCA backplane
571 fabric. Upon loading, the driver exports a sysfs directory,
572 /sys/devices/platform/telco_clock, with a number of files for
573 controlling the behavior of this hardware.
Mark Gross1a80ba82005-10-30 15:02:55 -0800574
Russell King4f911d62007-05-08 00:28:17 -0700575config DEVPORT
576 bool
577 depends on !M68K
578 depends on ISA || PCI
579 default y
580
Martin Schwidefsky61d48c22007-05-10 15:46:00 +0200581source "drivers/s390/char/Kconfig"
582
Niranjana Vishwanathapura73210a12011-03-23 16:42:55 -0700583config MSM_SMD_PKT
584 bool "Enable device interface for some SMD packet ports"
585 default n
586 depends on MSM_SMD
587 help
588 Enables userspace clients to read and write to some packet SMD
589 ports via device interface for MSM chipset.
590
Chris Metcalfdbcb4a12011-06-10 13:07:48 -0400591config TILE_SROM
592 bool "Character-device access via hypervisor to the Tilera SPI ROM"
593 depends on TILE
594 default y
595 ---help---
596 This device provides character-level read-write access
597 to the SROM, typically via the "0", "1", and "2" devices
598 in /dev/srom/. The Tilera hypervisor makes the flash
599 device appear much like a simple EEPROM, and knows
600 how to partition a single ROM for multiple purposes.
601
Linus Torvalds1da177e2005-04-16 15:20:36 -0700602endmenu
603