blob: 3067d56b11a6b6af70ac980ec42d1e8846dd87ca [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001
Jan Engelhardt0f217122007-04-30 21:37:55 +10002menuconfig MACINTOSH_DRIVERS
3 bool "Macintosh device drivers"
Soeren Sonnenburg45941d02007-02-08 14:20:38 -08004 depends on PPC || MAC || X86
Olaf Heringe2f1f192007-06-23 02:29:24 +02005 default y if (PPC_PMAC || MAC)
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02006 ---help---
7 Say Y here to get to see options for devices used with Macintosh
8 computers. This option alone does not add any kernel code.
9
10 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardt0f217122007-04-30 21:37:55 +100011
12if MACINTOSH_DRIVERS
Linus Torvalds1da177e2005-04-16 15:20:36 -070013
14config ADB
15 bool "Apple Desktop Bus (ADB) support"
Olaf Hering64c74de2005-07-27 11:44:16 -070016 depends on MAC || (PPC_PMAC && PPC32)
Linus Torvalds1da177e2005-04-16 15:20:36 -070017 help
18 Apple Desktop Bus (ADB) support is for support of devices which
19 are connected to an ADB port. ADB devices tend to have 4 pins.
20 If you have an Apple Macintosh prior to the iMac, an iBook or
21 PowerBook, or a "Blue and White G3", you probably want to say Y
22 here. Otherwise say N.
23
24config ADB_MACII
25 bool "Include Mac II ADB driver"
26 depends on ADB && MAC
27 help
28 Say Y here if want your kernel to support Macintosh systems that use
29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci,
30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
31 Centris 650.
32
33config ADB_MACIISI
34 bool "Include Mac IIsi ADB driver"
Geert Uytterhoeven6cf30b32013-05-24 14:10:51 +020035 depends on ADB && MAC && BROKEN
Linus Torvalds1da177e2005-04-16 15:20:36 -070036 help
37 Say Y here if want your kernel to support Macintosh systems that use
38 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic
39 II, LC, LC II, LC III, Performa 460, and the Performa 600.
40
41config ADB_IOP
42 bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
43 depends on ADB && MAC
44 help
45 The I/O Processor (IOP) is an Apple custom IC designed to provide
46 intelligent support for I/O controllers. It is described at
47 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
48 support for it, say 'Y' here.
49
50config ADB_PMU68K
51 bool "Include PMU (Powerbook) ADB driver"
52 depends on ADB && MAC
53 help
54 Say Y here if want your kernel to support the m68k based Powerbooks.
55 This includes the PowerBook 140, PowerBook 145, PowerBook 150,
56 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
57 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
58 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
59 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
60
61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
62config ADB_CUDA
63 bool "Support for CUDA based Macs and PowerMacs"
64 depends on (ADB || PPC_PMAC) && !PPC_PMAC64
65 help
66 This provides support for CUDA based Macintosh and Power Macintosh
67 systems. This includes many m68k based Macs (Color Classic, Mac TV,
68 Performa 475, Performa 520, Performa 550, Performa 575,
69 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
70 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
71 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later
72 models should use CONFIG_ADB_PMU instead. It is safe to say Y here
73 even if your machine doesn't have a CUDA.
74
75 If unsure say Y.
76
77config ADB_PMU
78 bool "Support for PMU based PowerMacs"
79 depends on PPC_PMAC
80 help
81 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
82 PMU is an embedded microprocessor whose primary function is to
83 control system power, and battery charging on the portable models.
84 The PMU also controls the ADB (Apple Desktop Bus) which connects to
85 the keyboard and mouse on some machines, as well as the non-volatile
86 RAM and the RTC (real time clock) chip. Say Y to enable support for
87 this device; you should do so if your machine is one of those
88 mentioned above.
89
Johannes Berg70c39672006-06-21 12:11:16 +020090config ADB_PMU_LED
91 bool "Support for the Power/iBook front LED"
92 depends on ADB_PMU
Paul Mackerras649e8572006-06-28 13:57:16 +100093 select NEW_LEDS
Johannes Berg70c39672006-06-21 12:11:16 +020094 select LEDS_CLASS
95 help
96 Support the front LED on Power/iBooks as a generic LED that can
97 be triggered by any of the supported triggers. To get the
98 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
99 and the ide-disk LED trigger and configure appropriately through
100 sysfs.
101
Johannes Bergd1a8df92006-07-03 14:28:14 +0200102config ADB_PMU_LED_IDE
103 bool "Use front LED as IDE LED by default"
104 depends on ADB_PMU_LED
Johannes Berg0bae35e2010-12-02 14:31:14 -0800105 depends on LEDS_CLASS
Christian Kujaude00b302013-10-29 21:25:43 -0700106 depends on IDE_GD_ATA
Johannes Bergd1a8df92006-07-03 14:28:14 +0200107 select LEDS_TRIGGERS
108 select LEDS_TRIGGER_IDE_DISK
109 help
110 This option makes the front LED default to the IDE trigger
111 so that it blinks on IDE activity.
112
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113config PMAC_SMU
114 bool "Support for SMU based PowerMacs"
115 depends on PPC_PMAC64
116 help
117 This option adds support for the newer G5 iMacs and PowerMacs based
118 on the "SMU" system control chip which replaces the old PMU.
119 If you don't know, say Y.
120
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121config PMAC_APM_EMU
122 tristate "APM emulation"
Johannes Bergb3028872007-03-20 05:18:02 +1100123 select APM_EMULATION
Johannes Berge358ae42007-06-02 19:13:44 +1000124 depends on ADB_PMU && PM && PPC32
Benjamin Herrenschmidt8c870932005-06-27 14:36:34 -0700125
126config PMAC_MEDIABAY
127 bool "Support PowerBook hotswap media bay"
Alexander Beregalovbcd71fe2009-04-17 00:15:13 +0000128 depends on PPC_PMAC && PPC32 && BLOCK
Benjamin Herrenschmidt8c870932005-06-27 14:36:34 -0700129 help
130 This option adds support for older PowerBook's hotswap media bay
131 that can contains batteries, floppy drives, or IDE devices. PCI
132 devices are not fully supported in the bay as I never had one to
133 try with
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135config PMAC_BACKLIGHT
136 bool "Backlight control for LCD screens"
Michael Hanselmanne01af032006-07-10 04:44:45 -0700137 depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
138 select FB_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700139 help
Michael Hanselmann5474c122006-06-25 05:47:08 -0700140 Say Y here to enable Macintosh specific extensions of the generic
141 backlight code. With this enabled, the brightness keys on older
142 PowerBooks will be enabled so you can change the screen brightness.
Frederik Schwarzer0211a9c2008-12-29 22:14:56 +0100143 Newer models should use a userspace daemon like pbbuttonsd.
Michael Hanselmann5474c122006-06-25 05:47:08 -0700144
145config PMAC_BACKLIGHT_LEGACY
146 bool "Provide legacy ioctl's on /dev/pmu for the backlight"
147 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
148 help
149 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
150 programs which use this old interface. New and updated programs
151 should use the backlight classes in sysfs.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153config ADB_MACIO
154 bool "Include MacIO (CHRP) ADB driver"
155 depends on ADB && PPC_CHRP && !PPC_PMAC64
156 help
157 Say Y here to include direct support for the ADB controller in the
158 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra
159 also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
160 OpenPIC controller and two RS422/Geoports.)
161
162config INPUT_ADBHID
163 bool "Support for ADB input devices (keyboard, mice, ...)"
164 depends on ADB && INPUT=y
165 help
166 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
167 such as keyboards, mice, joysticks, trackpads or graphic tablets
168 handled by the input layer. If you say Y here, make sure to say Y to
169 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
170 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
171 support" (CONFIG_INPUT_EVDEV) as well.
172
173 If unsure, say Y.
174
175config MAC_EMUMOUSEBTN
Dmitry Torokhov429722e2010-01-30 01:44:20 -0800176 tristate "Support for mouse button 2+3 emulation"
177 depends on SYSCTL && INPUT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700178 help
179 This provides generic support for emulating the 2nd and 3rd mouse
180 button with keypresses. If you say Y here, the emulation is still
181 disabled by default. The emulation is controlled by these sysctl
182 entries:
183 /proc/sys/dev/mac_hid/mouse_button_emulation
184 /proc/sys/dev/mac_hid/mouse_button2_keycode
185 /proc/sys/dev/mac_hid/mouse_button3_keycode
186
187 If you have an Apple machine with a 1-button mouse, say Y here.
188
Dmitry Torokhov429722e2010-01-30 01:44:20 -0800189 To compile this driver as a module, choose M here: the
190 module will be called mac_hid.
191
Linus Torvalds1da177e2005-04-16 15:20:36 -0700192config THERM_WINDTUNNEL
193 tristate "Support for thermal management on Windtunnel G4s"
Benjamin Herrenschmidta28d3af2006-01-07 11:35:26 +1100194 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
Linus Torvalds1da177e2005-04-16 15:20:36 -0700195 help
196 This driver provides some thermostat and fan control for the desktop
197 G4 "Windtunnel"
198
199config THERM_ADT746X
200 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
Benjamin Herrenschmidta28d3af2006-01-07 11:35:26 +1100201 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202 help
203 This driver provides some thermostat and fan control for the
Matt LaPlante09509602006-10-03 22:31:37 +0200204 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205 better fan behaviour by default, and some manual control.
206
207config THERM_PM72
Benjamin Herrenschmidt6cd32092012-04-29 15:42:27 +0000208 tristate "Support for thermal management on PowerMac G5 (AGP)"
Benjamin Herrenschmidta28d3af2006-01-07 11:35:26 +1100209 depends on I2C && I2C_POWERMAC && PPC_PMAC64
Benjamin Herrenschmidt6cd32092012-04-29 15:42:27 +0000210 default n
Linus Torvalds1da177e2005-04-16 15:20:36 -0700211 help
212 This driver provides thermostat and fan control for the desktop
Benjamin Herrenschmidt6cd32092012-04-29 15:42:27 +0000213 G5 machines.
214
215 This is deprecated, use windfarm instead.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700216
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100217config WINDFARM
218 tristate "New PowerMac thermal control infrastructure"
Al Viro6f36d172006-06-23 02:05:03 -0700219 depends on PPC
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100220
221config WINDFARM_PM81
222 tristate "Support for thermal management on iMac G5"
223 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
Benjamin Herrenschmidta28d3af2006-01-07 11:35:26 +1100224 select I2C_POWERMAC
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100225 help
226 This driver provides thermal control for the iMacG5
227
Benjamin Herrenschmidt6cd32092012-04-29 15:42:27 +0000228config WINDFARM_PM72
229 tristate "Support for thermal management on PowerMac G5 (AGP)"
230 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
231 select I2C_POWERMAC
232 help
233 This driver provides thermal control for the PowerMac G5
234 "AGP" variants (PowerMac 7,2 and 7,3)
235
236config WINDFARM_RM31
237 tristate "Support for thermal management on Xserve G5"
238 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
239 select I2C_POWERMAC
240 help
241 This driver provides thermal control for the Xserve G5
242 (RackMac3,1)
243
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100244config WINDFARM_PM91
245 tristate "Support for thermal management on PowerMac9,1"
246 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
Benjamin Herrenschmidta28d3af2006-01-07 11:35:26 +1100247 select I2C_POWERMAC
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100248 help
249 This driver provides thermal control for the PowerMac9,1
250 which is the recent (SMU based) single CPU desktop G5
251
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100252config WINDFARM_PM112
253 tristate "Support for thermal management on PowerMac11,2"
254 depends on WINDFARM && I2C && PMAC_SMU
Linus Torvaldse5ea0a92006-02-08 07:51:17 -0800255 select I2C_POWERMAC
Benjamin Herrenschmidtac171c42006-02-08 16:42:51 +1100256 help
257 This driver provides thermal control for the PowerMac11,2
258 which are the recent dual and quad G5 machines using the
259 970MP dual-core processor.
Benjamin Herrenschmidt75722d32005-11-07 16:08:17 +1100260
Étienne Bersac80ff9742008-04-29 15:39:55 +1000261config WINDFARM_PM121
262 tristate "Support for thermal management on PowerMac12,1"
263 depends on WINDFARM && I2C && PMAC_SMU
264 select I2C_POWERMAC
265 help
266 This driver provides thermal control for the PowerMac12,1
267 which is the iMac G5 (iSight).
268
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269config ANSLCD
270 tristate "Support for ANS LCD display"
271 depends on ADB_CUDA && PPC_PMAC
272
Benjamin Herrenschmidt3e00a5a2006-11-16 14:03:33 +1100273config PMAC_RACKMETER
274 tristate "Support for Apple XServe front panel LEDs"
275 depends on PPC_PMAC
276 help
David Sterba3dde6ad2007-05-09 07:12:20 +0200277 This driver provides some support to control the front panel
Benjamin Herrenschmidt3e00a5a2006-11-16 14:03:33 +1100278 blue LEDs "vu-meter" of the XServer macs.
279
Jean Delvarebd5f47e2010-10-28 20:31:50 +0200280config SENSORS_AMS
281 tristate "Apple Motion Sensor driver"
Kees Cook80ec2132013-01-16 18:53:42 -0800282 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C)
Jean Delvarebd5f47e2010-10-28 20:31:50 +0200283 select INPUT_POLLDEV
284 help
285 Support for the motion sensor included in PowerBooks. Includes
286 implementations for PMU and I2C.
287
288 This driver can also be built as a module. If so, the module
289 will be called ams.
290
291config SENSORS_AMS_PMU
292 bool "PMU variant"
293 depends on SENSORS_AMS && ADB_PMU
294 default y
295 help
296 PMU variant of motion sensor, found in late 2005 PowerBooks.
297
298config SENSORS_AMS_I2C
299 bool "I2C variant"
300 depends on SENSORS_AMS && I2C
301 default y
302 help
303 I2C variant of motion sensor, found in early 2005 PowerBooks and
304 iBooks.
305
Jan Engelhardt0f217122007-04-30 21:37:55 +1000306endif # MACINTOSH_DRIVERS