blob: 03200699d274bf5e156db6948ac47fb73664f0e8 [file] [log] [blame]
Oliver Hartkopp0d665482007-11-16 15:52:17 -08001#
2# Controller Area Network (CAN) network layer core configuration
3#
4
5menuconfig CAN
6 depends on NET
7 tristate "CAN bus subsystem support"
8 ---help---
9 Controller Area Network (CAN) is a slow (up to 1Mbit/s) serial
10 communications protocol which was developed by Bosch in
11 1991, mainly for automotive, but now widely used in marine
12 (NMEA2000), industrial, and medical applications.
13 More information on the CAN network protocol family PF_CAN
14 is contained in <Documentation/networking/can.txt>.
15
16 If you want CAN support you should say Y here and also to the
17 specific driver for your controller(s) below.
Oliver Hartkoppc18ce102007-11-16 15:53:09 -080018
19config CAN_RAW
20 tristate "Raw CAN Protocol (raw access with CAN-ID filtering)"
21 depends on CAN
22 default N
23 ---help---
24 The raw CAN protocol option offers access to the CAN bus via
25 the BSD socket API. You probably want to use the raw socket in
26 most cases where no higher level protocol is being used. The raw
27 socket has several filter options e.g. ID masking / error frames.
28 To receive/send raw CAN messages, use AF_CAN with protocol CAN_RAW.
Oliver Hartkoppffd980f2007-11-16 15:53:52 -080029
30config CAN_BCM
31 tristate "Broadcast Manager CAN Protocol (with content filtering)"
32 depends on CAN
33 default N
34 ---help---
35 The Broadcast Manager offers content filtering, timeout monitoring,
36 sending of RTR frames, and cyclic CAN messages without permanent user
37 interaction. The BCM can be 'programmed' via the BSD socket API and
38 informs you on demand e.g. only on content updates / timeouts.
39 You probably want to use the bcm socket in most cases where cyclic
40 CAN messages are used on the bus (e.g. in automotive environments).
41 To use the Broadcast Manager, use AF_CAN with protocol CAN_BCM.
Oliver Hartkoppccb29632007-11-16 15:56:08 -080042
Oliver Hartkoppc1aabdf2011-09-01 04:23:23 +000043config CAN_GW
44 tristate "CAN Gateway/Router (with netlink configuration)"
45 depends on CAN
46 default N
47 ---help---
48 The CAN Gateway/Router is used to route (and modify) CAN frames.
49 It is based on the PF_CAN core infrastructure for msg filtering and
50 msg sending and can optionally modify routed CAN frames on the fly.
51 CAN frames can be routed between CAN network interfaces (one hop).
52 They can be modified with AND/OR/XOR/SET operations as configured
53 by the netlink configuration interface known e.g. from iptables.
Oliver Hartkoppccb29632007-11-16 15:56:08 -080054
55source "drivers/net/can/Kconfig"