Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 94421b05d3f494943078230871859c5d92ac4505 / . / drivers / regulator / Kconfig
blob: d32f833a16c989debb2ebe39a292d5c1d2e42a69 [file] [log] [blame]
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]1menuconfig REGULATOR
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]2 bool "Voltage and Current Regulator Support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]3 help
4 Generic Voltage and Current Regulator support.
5
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
10 sysfs interface.
11
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
16
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
19 regulators.
20
21 If unsure, say no.
22
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]23
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]24if REGULATOR
25
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]26config REGULATOR_DEBUG
27 bool "Regulator debug support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]28 help
29 Say yes here to enable debugging support.
30
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]31config REGULATOR_DUMMY
32 bool "Provide a dummy regulator if regulator lookups fail"
33 help
34 If this option is enabled then when a regulator lookup fails
35 and the board has not specified that it has provided full
Mark Brown4f842f62012-07-26 15:50:49 +0100[diff] [blame]36 constraints the regulator core will provide an always
37 enabled dummy regulator, allowing consumer drivers to continue.
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]38
39 A warning will be generated when this substitution is done.
40
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]41config REGULATOR_FIXED_VOLTAGE
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]42 tristate "Fixed voltage regulator support"
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]43 help
44 This driver provides support for fixed voltage regulators,
45 useful for systems which use a combination of software
46 managed regulators and simple non-configurable regulators.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]47
48config REGULATOR_VIRTUAL_CONSUMER
49 tristate "Virtual regulator consumer support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]50 help
51 This driver provides a virtual consumer for the voltage and
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]52 current regulator API which provides sysfs controls for
53 configuring the supplies requested. This is mainly useful
54 for test purposes.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]55
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]56 If unsure, say no.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]57
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]58config REGULATOR_USERSPACE_CONSUMER
59 tristate "Userspace regulator consumer support"
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]60 help
61 There are some classes of devices that are controlled entirely
Michael Prokop6f2653e2009-09-05 02:59:14 +0200[diff] [blame]62 from user space. Userspace consumer driver provides ability to
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]63 control power supplies for such devices.
64
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]65 If unsure, say no.
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]66
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]67config REGULATOR_88PM8607
68 bool "Marvell 88PM8607 Power regulators"
69 depends on MFD_88PM860X=y
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]70 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]71 This driver supports 88PM8607 voltage regulator chips.
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]72
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]73config REGULATOR_AD5398
74 tristate "Analog Devices AD5398/AD5821 regulators"
75 depends on I2C
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]76 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]77 This driver supports AD5398 and AD5821 current regulator chips.
78 If building into module, its name is ad5398.ko.
79
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]80config REGULATOR_ANATOP
81 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
82 depends on MFD_SYSCON
83 help
84 Say y here to support Freescale i.MX on-chip ANATOP LDOs
85 regulators. It is recommended that this option be
86 enabled on i.MX6 platform.
87
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]88config REGULATOR_AAT2870
89 tristate "AnalogicTech AAT2870 Regulators"
90 depends on MFD_AAT2870_CORE
91 help
92 If you have a AnalogicTech AAT2870 say Y to enable the
93 regulator driver.
94
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]95config REGULATOR_AB3100
96 tristate "ST-Ericsson AB3100 Regulator functions"
97 depends on AB3100_CORE
98 default y if AB3100_CORE
99 help
100 These regulators correspond to functionality in the
101 AB3100 analog baseband dealing with power regulators
102 for the system.
103
104config REGULATOR_AB8500
105 bool "ST-Ericsson AB8500 Power Regulators"
106 depends on AB8500_CORE
107 help
108 This driver supports the regulators found on the ST-Ericsson mixed
109 signal AB8500 PMIC
110
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]111config REGULATOR_ARIZONA
112 tristate "Wolfson Arizona class devices"
113 depends on MFD_ARIZONA
Mark Browne6ed9052013-01-10 19:14:11 +0000[diff] [blame]114 depends on SND_SOC
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]115 help
116 Support for the regulators found on Wolfson Arizona class
117 devices.
118
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]119config REGULATOR_AS3711
120 tristate "AS3711 PMIC"
121 depends on MFD_AS3711
122 help
123 This driver provides support for the voltage regulators on the
124 AS3711 PMIC
125
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]126config REGULATOR_DA903X
127 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
128 depends on PMIC_DA903X
129 help
130 Say y here to support the BUCKs and LDOs regulators found on
131 Dialog Semiconductor DA9030/DA9034 PMIC.
132
133config REGULATOR_DA9052
134 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
135 depends on PMIC_DA9052
136 help
137 This driver supports the voltage regulators of DA9052-BC and
138 DA9053-AA/Bx PMIC.
139
Ashish Jangamf6130be2012-11-01 13:57:56 +0530[diff] [blame]140config REGULATOR_DA9055
141 tristate "Dialog Semiconductor DA9055 regulators"
142 depends on MFD_DA9055
143 help
144 Say y here to support the BUCKs and LDOs regulators found on
145 Dialog Semiconductor DA9055 PMIC.
146
147 This driver can also be built as a module. If so, the module
148 will be called da9055-regulator.
149
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]150config REGULATOR_DBX500_PRCMU
151 bool
152
153config REGULATOR_DB8500_PRCMU
154 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
155 depends on MFD_DB8500_PRCMU
156 select REGULATOR_DBX500_PRCMU
157 help
158 This driver supports the voltage domain regulators controlled by the
159 DB8500 PRCMU
160
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700[diff] [blame]161config REGULATOR_FAN53555
162 tristate "Fairchild FAN53555 Regulator"
163 depends on I2C
164 select REGMAP_I2C
165 help
166 This driver supports Fairchild FAN53555 Digitally Programmable
167 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
168 regulator that delivers a digitally programmable output from an
169 input voltage supply of 2.5V to 5.5V. The output voltage is
170 programmed through an I2C interface.
171
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]172config REGULATOR_GPIO
173 tristate "GPIO regulator support"
174 depends on GPIOLIB
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]175 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]176 This driver provides support for regulators that can be
177 controlled via gpios.
178 It is capable of supporting current and voltage regulators
179 and the platform has to provide a mapping of GPIO-states
180 to target volts/amps.
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]181
182config REGULATOR_ISL6271A
183 tristate "Intersil ISL6271A Power regulator"
184 depends on I2C
185 help
186 This driver supports ISL6271A voltage regulator chip.
187
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]188config REGULATOR_LP3971
189 tristate "National Semiconductors LP3971 PMIC regulator driver"
190 depends on I2C
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]191 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]192 Say Y here to support the voltage regulators and convertors
193 on National Semiconductors LP3971 PMIC
194
195config REGULATOR_LP3972
196 tristate "National Semiconductors LP3972 PMIC regulator driver"
197 depends on I2C
198 help
199 Say Y here to support the voltage regulators and convertors
200 on National Semiconductors LP3972 PMIC
201
202config REGULATOR_LP872X
203 bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
204 depends on I2C=y
205 select REGMAP_I2C
206 help
207 This driver supports LP8720/LP8725 PMIC
208
209config REGULATOR_LP8755
210 tristate "TI LP8755 High Performance PMU driver"
211 depends on I2C
212 select REGMAP_I2C
213 help
214 This driver supports LP8755 High Performance PMU driver. This
215 chip contains six step-down DC/DC converters which can support
216 9 mode multiphase configuration.
217
218config REGULATOR_LP8788
219 bool "TI LP8788 Power Regulators"
220 depends on MFD_LP8788
221 help
222 This driver supports LP8788 voltage regulator chip.
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]223
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]224config REGULATOR_MAX1586
225 tristate "Maxim 1586/1587 voltage regulator"
226 depends on I2C
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]227 help
228 This driver controls a Maxim 1586 or 1587 voltage output
229 regulator via I2C bus. The provided regulator is suitable
230 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
231
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]232config REGULATOR_MAX8649
233 tristate "Maxim 8649 voltage regulator"
234 depends on I2C
Jonghwan Choic5b68d472011-10-24 22:26:26 +0900[diff] [blame]235 select REGMAP_I2C
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]236 help
237 This driver controls a Maxim 8649 voltage output regulator via
238 I2C bus.
239
Wolfram Sang27f37e42009-09-25 09:39:26 +0200[diff] [blame]240config REGULATOR_MAX8660
241 tristate "Maxim 8660/8661 voltage regulator"
242 depends on I2C
243 help
244 This driver controls a Maxim 8660/8661 voltage output
245 regulator via I2C bus.
246
Gyungoh Yooffee1902012-08-09 14:24:34 -0600[diff] [blame]247config REGULATOR_MAX8907
248 tristate "Maxim 8907 voltage regulator"
249 depends on MFD_MAX8907
250 help
251 This driver controls a Maxim 8907 voltage output regulator
252 via I2C bus. The provided regulator is suitable for Tegra
253 chip to control Step-Down DC-DC and LDOs.
254
Haojian Zhuang08ff6f22010-01-11 13:10:08 +0100[diff] [blame]255config REGULATOR_MAX8925
256 tristate "Maxim MAX8925 Power Management IC"
257 depends on MFD_MAX8925
258 help
259 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
260
MyungJoo Ham202f4f52010-08-20 14:43:56 +0900[diff] [blame]261config REGULATOR_MAX8952
262 tristate "Maxim MAX8952 Power Management IC"
263 depends on I2C
264 help
265 This driver controls a Maxim 8952 voltage output regulator
266 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
267 modes ranging from 0.77V to 1.40V by 0.01V steps.
268
Laxman Dewangan5928f532012-11-19 06:58:29 +0530[diff] [blame]269config REGULATOR_MAX8973
270 tristate "Maxim MAX8973 voltage regulator "
271 depends on I2C
272 select REGMAP_I2C
273 help
274 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
275 switching regulator delievers up to 9A of output current. Each
276 phase operates at a 2MHz fixed frequency with a 120 deg shift
277 from the adjacent phase, allowing the use of small magnetic component.
278
MyungJoo Hambd6ca2c2011-03-11 11:34:44 +0900[diff] [blame]279config REGULATOR_MAX8997
280 tristate "Maxim 8997/8966 regulator"
281 depends on MFD_MAX8997
282 help
283 This driver controls a Maxim 8997/8966 regulator
284 via I2C bus. The provided regulator is suitable for S5PC110,
285 S5PV210, and Exynos-4 chips to control VCC_CORE and
286 VCC_USIM voltages.
287
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]288config REGULATOR_MAX8998
289 tristate "Maxim 8998 voltage regulator"
Marek Szyprowski69f71002010-06-21 10:04:23 +0200[diff] [blame]290 depends on MFD_MAX8998
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]291 help
292 This driver controls a Maxim 8998 voltage output regulator
293 via I2C bus. The provided regulator is suitable for S3C6410
294 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
295
Jonghwa Lee133d4012012-06-01 13:17:14 +0900[diff] [blame]296config REGULATOR_MAX77686
297 tristate "Maxim 77686 regulator"
298 depends on MFD_MAX77686
299 help
300 This driver controls a Maxim 77686 regulator
301 via I2C bus. The provided regulator is suitable for
302 Exynos-4 chips to control VARM and VINT voltages.
303
Jonghwa Lee80b022e2013-06-25 10:08:38 +0900[diff] [blame]304config REGULATOR_MAX77693
305 tristate "Maxim MAX77693 regulator"
306 depends on MFD_MAX77693
307 help
308 This driver controls a Maxim 77693 regulator via I2C bus.
309 The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
310 and one current regulator 'CHARGER'. This is suitable for
311 Exynos-4x12 chips.
312
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]313config REGULATOR_MC13XXX_CORE
314 tristate
315
316config REGULATOR_MC13783
317 tristate "Freescale MC13783 regulator driver"
318 depends on MFD_MC13783
319 select REGULATOR_MC13XXX_CORE
320 help
321 Say y here to support the regulators found on the Freescale MC13783
322 PMIC.
323
324config REGULATOR_MC13892
325 tristate "Freescale MC13892 regulator driver"
326 depends on MFD_MC13XXX
327 select REGULATOR_MC13XXX_CORE
328 help
329 Say y here to support the regulators found on the Freescale MC13892
330 PMIC.
331
332config REGULATOR_PALMAS
333 tristate "TI Palmas PMIC Regulators"
334 depends on MFD_PALMAS
335 help
336 If you wish to control the regulators on the Palmas series of
337 chips say Y here. This will enable support for all the software
338 controllable SMPS/LDO regulators.
339
340 The regulators available on Palmas series chips vary depending
341 on the muxing. This is handled automatically in the driver by
342 reading the mux info from OTP.
343
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]344config REGULATOR_PCAP
345 tristate "Motorola PCAP2 regulator driver"
346 depends on EZX_PCAP
Sangbeom Kim62aa4922012-01-13 10:13:13 +0900[diff] [blame]347 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]348 This driver provides support for the voltage regulators of the
349 PCAP2 PMIC.
Balaji Rao5ec271e2009-01-09 01:51:01 +0100[diff] [blame]350
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]351config REGULATOR_PCF50633
352 tristate "NXP PCF50633 regulator driver"
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]353 depends on MFD_PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]354 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]355 Say Y here to support the voltage regulators and convertors
356 on PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]357
Robin Gong3784b6d2013-07-25 11:33:18 +0800[diff] [blame]358config REGULATOR_PFUZE100
359 tristate "Support regulators on Freescale PFUZE100 PMIC"
360 depends on I2C
Axel Lin94421b02013-07-29 12:08:01 +0800[diff] [blame^]361 select REGMAP_I2C
Robin Gong3784b6d2013-07-25 11:33:18 +0800[diff] [blame]362 help
363 Say y here to support the regulators found on the Freescale PFUZE100
364 PMIC.
365
Laxman Dewangan6ffc3272012-04-04 12:44:00 +0530[diff] [blame]366config REGULATOR_RC5T583
367 tristate "RICOH RC5T583 Power regulators"
368 depends on MFD_RC5T583
369 help
370 Select this option to enable the power regulator of RICOH
371 PMIC RC5T583.
372 This driver supports the control of different power rails of device
373 through regulator interface. The device supports multiple DCDC/LDO
374 outputs which can be controlled by i2c communication.
375
Sangbeom Kimcb746852012-07-11 21:08:17 +0900[diff] [blame]376config REGULATOR_S2MPS11
377 tristate "Samsung S2MPS11 voltage regulator"
378 depends on MFD_SEC_CORE
379 help
380 This driver supports a Samsung S2MPS11 voltage output regulator
381 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
382 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
383
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]384config REGULATOR_S5M8767
385 tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim66c9fbb2012-07-11 21:06:40 +0900[diff] [blame]386 depends on MFD_SEC_CORE
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]387 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]388 This driver supports a Samsung S5M8767A voltage output regulator
389 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
390 supports DVS mode with 8bits of output voltage control.
Yong Shen5e428d52010-12-14 14:00:55 +0800[diff] [blame]391
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]392config REGULATOR_TI_ABB
393 bool "TI Adaptive Body Bias on-chip LDO"
394 depends on ARCH_OMAP
Linus Walleijd619bc12009-09-09 11:31:00 +0200[diff] [blame]395 help
Mark Brown82b736d2013-07-05 20:45:22 +0100[diff] [blame]396 Select this option to support Texas Instruments' on-chip Adaptive Body
397 Bias (ABB) LDO regulators. It is recommended that this option be
398 enabled on required TI SoC. Certain Operating Performance Points
399 on TI SoCs may be unstable without enabling this as it provides
400 device specific optimized bias to allow/optimize functionality.
Graeme Gregory4c5dabc2012-05-15 15:48:59 +0900[diff] [blame]401
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]402config REGULATOR_TPS51632
403 tristate "TI TPS51632 Power Regulator"
404 depends on I2C
405 select REGMAP_I2C
406 help
407 This driver supports TPS51632 voltage regulator chip.
Axel Lin7bde7672012-11-01 14:02:36 +0800[diff] [blame]408 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]409 with Serial VID control and DVFS.
410 The voltage output can be configure through I2C interface or PWM
411 interface.
412
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]413config REGULATOR_TPS6105X
414 tristate "TI TPS6105X Power regulators"
415 depends on TPS6105X
416 default y if TPS6105X
417 help
418 This driver supports TPS61050/TPS61052 voltage regulator chips.
419 It is a single boost converter primarily for white LEDs and
420 audio amplifiers.
421
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]422config REGULATOR_TPS62360
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]423 tristate "TI TPS6236x Power Regulator"
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]424 depends on I2C
425 select REGMAP_I2C
426 help
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]427 This driver supports TPS6236x voltage regulator chip. This
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]428 regulator is meant for processor core supply. This chip is
429 high-frequency synchronous step down dc-dc converter optimized
430 for battery-powered portable applications.
431
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]432config REGULATOR_TPS65023
433 tristate "TI TPS65023 Power regulators"
434 depends on I2C
Mark Brown90923352011-06-18 01:18:51 +0100[diff] [blame]435 select REGMAP_I2C
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]436 help
437 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
438 three step-down converters and two general-purpose LDO voltage regulators.
439 It supports TI's software based Class-2 SmartReflex implementation.
440
441config REGULATOR_TPS6507X
442 tristate "TI TPS6507X Power regulators"
443 depends on I2C
444 help
445 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
446 three step-down converters and two general-purpose LDO voltage regulators.
447 It supports TI's software based Class-2 SmartReflex implementation.
448
Venu Byravarasu452534e2012-03-22 18:34:09 +0530[diff] [blame]449config REGULATOR_TPS65090
450 tristate "TI TPS65090 Power regulator"
451 depends on MFD_TPS65090
452 help
453 This driver provides support for the voltage regulators on the
454 TI TPS65090 PMIC.
455
AnilKumar Cha4930772012-01-11 16:11:49 +0530[diff] [blame]456config REGULATOR_TPS65217
457 tristate "TI TPS65217 Power regulators"
458 depends on MFD_TPS65217
459 help
460 This driver supports TPS65217 voltage regulator chips. TPS65217
461 provides three step-down converters and four general-purpose LDO
462 voltage regulators. It supports software based voltage control
463 for different voltage domains
464
Cyril Chemparathy1394fd22010-12-07 12:04:11 -0500[diff] [blame]465config REGULATOR_TPS6524X
466 tristate "TI TPS6524X Power regulators"
467 depends on SPI
468 help
469 This driver supports TPS6524X voltage regulator chips. TPS6524X
470 provides three step-down converters and two general-purpose LDO
471 voltage regulators. This device is interfaced using a customized
472 serial interface currently supported on the sequencer serial
473 port controller.
474
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]475config REGULATOR_TPS6586X
476 tristate "TI TPS6586X Power regulators"
477 depends on MFD_TPS6586X
478 help
479 This driver supports TPS6586X voltage regulator chips.
480
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]481config REGULATOR_TPS65910
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]482 tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]483 depends on MFD_TPS65910
484 help
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]485 This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]486
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]487config REGULATOR_TPS65912
488 tristate "TI TPS65912 Power regulator"
489 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]490 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]491 This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]492
Laxman Dewangan1a0bb672012-11-11 20:42:01 +0530[diff] [blame]493config REGULATOR_TPS80031
494 tristate "TI TPS80031/TPS80032 power regualtor driver"
495 depends on MFD_TPS80031
496 help
497 TPS80031/ TPS80032 Fully Integrated Power Management with Power
498 Path and Battery Charger. It has 5 configurable step-down
499 converters, 11 general purpose LDOs, VBUS generator and digital
500 output to control regulators.
501
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]502config REGULATOR_TWL4030
503 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
504 depends on TWL4030_CORE
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]505 help
506 This driver supports the voltage regulators provided by
507 this family of companion chips.
508
Pawel Moll31e54082012-09-24 18:56:54 +0100[diff] [blame]509config REGULATOR_VEXPRESS
510 tristate "Versatile Express regulators"
511 depends on VEXPRESS_CONFIG
512 help
513 This driver provides support for voltage regulators available
514 on the ARM Ltd's Versatile Express platform.
515
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]516config REGULATOR_WM831X
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]517 tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]518 depends on MFD_WM831X
519 help
520 Support the voltage and current regulators of the WM831x series
521 of PMIC devices.
522
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]523config REGULATOR_WM8350
524 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
525 depends on MFD_WM8350
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]526 help
527 This driver provides support for the voltage and current regulators
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]528 of the WM8350 AudioPlus PMIC.
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]529
530config REGULATOR_WM8400
531 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
532 depends on MFD_WM8400
533 help
534 This driver provides support for the voltage regulators of the
535 WM8400 AudioPlus PMIC.
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]536
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]537config REGULATOR_WM8994
538 tristate "Wolfson Microelectronics WM8994 CODEC"
539 depends on MFD_WM8994
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]540 help
541 This driver provides support for the voltage regulators on the
542 WM8994 CODEC.
543
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]544endif
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]545