Maxime Bizon | e7300d0 | 2009-08-18 13:23:37 +0100 | [diff] [blame] | 1 | /* |
| 2 | * This file is subject to the terms and conditions of the GNU General Public |
| 3 | * License. See the file "COPYING" in the main directory of this archive |
| 4 | * for more details. |
| 5 | * |
| 6 | * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> |
| 7 | */ |
| 8 | |
| 9 | #include <linux/types.h> |
| 10 | #include <linux/pci.h> |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/init.h> |
| 13 | #include <linux/delay.h> |
| 14 | #include <linux/io.h> |
| 15 | |
| 16 | #include "pci-bcm63xx.h" |
| 17 | |
| 18 | /* |
| 19 | * swizzle 32bits data to return only the needed part |
| 20 | */ |
| 21 | static int postprocess_read(u32 data, int where, unsigned int size) |
| 22 | { |
| 23 | u32 ret; |
| 24 | |
| 25 | ret = 0; |
| 26 | switch (size) { |
| 27 | case 1: |
| 28 | ret = (data >> ((where & 3) << 3)) & 0xff; |
| 29 | break; |
| 30 | case 2: |
| 31 | ret = (data >> ((where & 3) << 3)) & 0xffff; |
| 32 | break; |
| 33 | case 4: |
| 34 | ret = data; |
| 35 | break; |
| 36 | } |
| 37 | return ret; |
| 38 | } |
| 39 | |
| 40 | static int preprocess_write(u32 orig_data, u32 val, int where, |
| 41 | unsigned int size) |
| 42 | { |
| 43 | u32 ret; |
| 44 | |
| 45 | ret = 0; |
| 46 | switch (size) { |
| 47 | case 1: |
| 48 | ret = (orig_data & ~(0xff << ((where & 3) << 3))) | |
| 49 | (val << ((where & 3) << 3)); |
| 50 | break; |
| 51 | case 2: |
| 52 | ret = (orig_data & ~(0xffff << ((where & 3) << 3))) | |
| 53 | (val << ((where & 3) << 3)); |
| 54 | break; |
| 55 | case 4: |
| 56 | ret = val; |
| 57 | break; |
| 58 | } |
| 59 | return ret; |
| 60 | } |
| 61 | |
| 62 | /* |
| 63 | * setup hardware for a configuration cycle with given parameters |
| 64 | */ |
| 65 | static int bcm63xx_setup_cfg_access(int type, unsigned int busn, |
| 66 | unsigned int devfn, int where) |
| 67 | { |
| 68 | unsigned int slot, func, reg; |
| 69 | u32 val; |
| 70 | |
| 71 | slot = PCI_SLOT(devfn); |
| 72 | func = PCI_FUNC(devfn); |
| 73 | reg = where >> 2; |
| 74 | |
| 75 | /* sanity check */ |
| 76 | if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT)) |
| 77 | return 1; |
| 78 | |
| 79 | if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT)) |
| 80 | return 1; |
| 81 | |
| 82 | if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT)) |
| 83 | return 1; |
| 84 | |
| 85 | /* ok, setup config access */ |
| 86 | val = (reg << MPI_L2PCFG_REG_SHIFT); |
| 87 | val |= (func << MPI_L2PCFG_FUNC_SHIFT); |
| 88 | val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT); |
| 89 | val |= MPI_L2PCFG_CFG_USEREG_MASK; |
| 90 | val |= MPI_L2PCFG_CFG_SEL_MASK; |
| 91 | /* type 0 cycle for local bus, type 1 cycle for anything else */ |
| 92 | if (type != 0) { |
| 93 | /* FIXME: how to specify bus ??? */ |
| 94 | val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT); |
| 95 | } |
| 96 | bcm_mpi_writel(val, MPI_L2PCFG_REG); |
| 97 | |
| 98 | return 0; |
| 99 | } |
| 100 | |
| 101 | static int bcm63xx_do_cfg_read(int type, unsigned int busn, |
| 102 | unsigned int devfn, int where, int size, |
| 103 | u32 *val) |
| 104 | { |
| 105 | u32 data; |
| 106 | |
| 107 | /* two phase cycle, first we write address, then read data at |
| 108 | * another location, caller already has a spinlock so no need |
| 109 | * to add one here */ |
| 110 | if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) |
| 111 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 112 | iob(); |
| 113 | data = le32_to_cpu(__raw_readl(pci_iospace_start)); |
| 114 | /* restore IO space normal behaviour */ |
| 115 | bcm_mpi_writel(0, MPI_L2PCFG_REG); |
| 116 | |
| 117 | *val = postprocess_read(data, where, size); |
| 118 | |
| 119 | return PCIBIOS_SUCCESSFUL; |
| 120 | } |
| 121 | |
| 122 | static int bcm63xx_do_cfg_write(int type, unsigned int busn, |
| 123 | unsigned int devfn, int where, int size, |
| 124 | u32 val) |
| 125 | { |
| 126 | u32 data; |
| 127 | |
| 128 | /* two phase cycle, first we write address, then write data to |
| 129 | * another location, caller already has a spinlock so no need |
| 130 | * to add one here */ |
| 131 | if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) |
| 132 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 133 | iob(); |
| 134 | |
| 135 | data = le32_to_cpu(__raw_readl(pci_iospace_start)); |
| 136 | data = preprocess_write(data, val, where, size); |
| 137 | |
| 138 | __raw_writel(cpu_to_le32(data), pci_iospace_start); |
| 139 | wmb(); |
| 140 | /* no way to know the access is done, we have to wait */ |
| 141 | udelay(500); |
| 142 | /* restore IO space normal behaviour */ |
| 143 | bcm_mpi_writel(0, MPI_L2PCFG_REG); |
| 144 | |
| 145 | return PCIBIOS_SUCCESSFUL; |
| 146 | } |
| 147 | |
| 148 | static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn, |
| 149 | int where, int size, u32 *val) |
| 150 | { |
| 151 | int type; |
| 152 | |
| 153 | type = bus->parent ? 1 : 0; |
| 154 | |
| 155 | if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) |
| 156 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 157 | |
| 158 | return bcm63xx_do_cfg_read(type, bus->number, devfn, |
| 159 | where, size, val); |
| 160 | } |
| 161 | |
| 162 | static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn, |
| 163 | int where, int size, u32 val) |
| 164 | { |
| 165 | int type; |
| 166 | |
| 167 | type = bus->parent ? 1 : 0; |
| 168 | |
| 169 | if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) |
| 170 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 171 | |
| 172 | return bcm63xx_do_cfg_write(type, bus->number, devfn, |
| 173 | where, size, val); |
| 174 | } |
| 175 | |
| 176 | struct pci_ops bcm63xx_pci_ops = { |
Ralf Baechle | 7034228 | 2013-01-22 12:59:30 +0100 | [diff] [blame] | 177 | .read = bcm63xx_pci_read, |
| 178 | .write = bcm63xx_pci_write |
Maxime Bizon | e7300d0 | 2009-08-18 13:23:37 +0100 | [diff] [blame] | 179 | }; |
| 180 | |
| 181 | #ifdef CONFIG_CARDBUS |
| 182 | /* |
| 183 | * emulate configuration read access on a cardbus bridge |
| 184 | */ |
| 185 | #define FAKE_CB_BRIDGE_SLOT 0x1e |
| 186 | |
| 187 | static int fake_cb_bridge_bus_number = -1; |
| 188 | |
| 189 | static struct { |
| 190 | u16 pci_command; |
| 191 | u8 cb_latency; |
| 192 | u8 subordinate_busn; |
| 193 | u8 cardbus_busn; |
| 194 | u8 pci_busn; |
| 195 | int bus_assigned; |
| 196 | u16 bridge_control; |
| 197 | |
| 198 | u32 mem_base0; |
| 199 | u32 mem_limit0; |
| 200 | u32 mem_base1; |
| 201 | u32 mem_limit1; |
| 202 | |
| 203 | u32 io_base0; |
| 204 | u32 io_limit0; |
| 205 | u32 io_base1; |
| 206 | u32 io_limit1; |
| 207 | } fake_cb_bridge_regs; |
| 208 | |
| 209 | static int fake_cb_bridge_read(int where, int size, u32 *val) |
| 210 | { |
| 211 | unsigned int reg; |
| 212 | u32 data; |
| 213 | |
| 214 | data = 0; |
| 215 | reg = where >> 2; |
| 216 | switch (reg) { |
| 217 | case (PCI_VENDOR_ID >> 2): |
| 218 | case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2): |
| 219 | /* create dummy vendor/device id from our cpu id */ |
| 220 | data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM; |
| 221 | break; |
| 222 | |
| 223 | case (PCI_COMMAND >> 2): |
| 224 | data = (PCI_STATUS_DEVSEL_SLOW << 16); |
| 225 | data |= fake_cb_bridge_regs.pci_command; |
| 226 | break; |
| 227 | |
| 228 | case (PCI_CLASS_REVISION >> 2): |
| 229 | data = (PCI_CLASS_BRIDGE_CARDBUS << 16); |
| 230 | break; |
| 231 | |
| 232 | case (PCI_CACHE_LINE_SIZE >> 2): |
| 233 | data = (PCI_HEADER_TYPE_CARDBUS << 16); |
| 234 | break; |
| 235 | |
| 236 | case (PCI_INTERRUPT_LINE >> 2): |
| 237 | /* bridge control */ |
| 238 | data = (fake_cb_bridge_regs.bridge_control << 16); |
| 239 | /* pin:intA line:0xff */ |
| 240 | data |= (0x1 << 8) | 0xff; |
| 241 | break; |
| 242 | |
| 243 | case (PCI_CB_PRIMARY_BUS >> 2): |
| 244 | data = (fake_cb_bridge_regs.cb_latency << 24); |
| 245 | data |= (fake_cb_bridge_regs.subordinate_busn << 16); |
| 246 | data |= (fake_cb_bridge_regs.cardbus_busn << 8); |
| 247 | data |= fake_cb_bridge_regs.pci_busn; |
| 248 | break; |
| 249 | |
| 250 | case (PCI_CB_MEMORY_BASE_0 >> 2): |
| 251 | data = fake_cb_bridge_regs.mem_base0; |
| 252 | break; |
| 253 | |
| 254 | case (PCI_CB_MEMORY_LIMIT_0 >> 2): |
| 255 | data = fake_cb_bridge_regs.mem_limit0; |
| 256 | break; |
| 257 | |
| 258 | case (PCI_CB_MEMORY_BASE_1 >> 2): |
| 259 | data = fake_cb_bridge_regs.mem_base1; |
| 260 | break; |
| 261 | |
| 262 | case (PCI_CB_MEMORY_LIMIT_1 >> 2): |
| 263 | data = fake_cb_bridge_regs.mem_limit1; |
| 264 | break; |
| 265 | |
| 266 | case (PCI_CB_IO_BASE_0 >> 2): |
| 267 | /* | 1 for 32bits io support */ |
| 268 | data = fake_cb_bridge_regs.io_base0 | 0x1; |
| 269 | break; |
| 270 | |
| 271 | case (PCI_CB_IO_LIMIT_0 >> 2): |
| 272 | data = fake_cb_bridge_regs.io_limit0; |
| 273 | break; |
| 274 | |
| 275 | case (PCI_CB_IO_BASE_1 >> 2): |
| 276 | /* | 1 for 32bits io support */ |
| 277 | data = fake_cb_bridge_regs.io_base1 | 0x1; |
| 278 | break; |
| 279 | |
| 280 | case (PCI_CB_IO_LIMIT_1 >> 2): |
| 281 | data = fake_cb_bridge_regs.io_limit1; |
| 282 | break; |
| 283 | } |
| 284 | |
| 285 | *val = postprocess_read(data, where, size); |
| 286 | return PCIBIOS_SUCCESSFUL; |
| 287 | } |
| 288 | |
| 289 | /* |
| 290 | * emulate configuration write access on a cardbus bridge |
| 291 | */ |
| 292 | static int fake_cb_bridge_write(int where, int size, u32 val) |
| 293 | { |
| 294 | unsigned int reg; |
| 295 | u32 data, tmp; |
| 296 | int ret; |
| 297 | |
| 298 | ret = fake_cb_bridge_read((where & ~0x3), 4, &data); |
| 299 | if (ret != PCIBIOS_SUCCESSFUL) |
| 300 | return ret; |
| 301 | |
| 302 | data = preprocess_write(data, val, where, size); |
| 303 | |
| 304 | reg = where >> 2; |
| 305 | switch (reg) { |
| 306 | case (PCI_COMMAND >> 2): |
| 307 | fake_cb_bridge_regs.pci_command = (data & 0xffff); |
| 308 | break; |
| 309 | |
| 310 | case (PCI_CB_PRIMARY_BUS >> 2): |
| 311 | fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff; |
| 312 | fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff; |
| 313 | fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff; |
| 314 | fake_cb_bridge_regs.pci_busn = data & 0xff; |
| 315 | if (fake_cb_bridge_regs.cardbus_busn) |
| 316 | fake_cb_bridge_regs.bus_assigned = 1; |
| 317 | break; |
| 318 | |
| 319 | case (PCI_INTERRUPT_LINE >> 2): |
| 320 | tmp = (data >> 16) & 0xffff; |
| 321 | /* disable memory prefetch support */ |
| 322 | tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0; |
| 323 | tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1; |
| 324 | fake_cb_bridge_regs.bridge_control = tmp; |
| 325 | break; |
| 326 | |
| 327 | case (PCI_CB_MEMORY_BASE_0 >> 2): |
| 328 | fake_cb_bridge_regs.mem_base0 = data; |
| 329 | break; |
| 330 | |
| 331 | case (PCI_CB_MEMORY_LIMIT_0 >> 2): |
| 332 | fake_cb_bridge_regs.mem_limit0 = data; |
| 333 | break; |
| 334 | |
| 335 | case (PCI_CB_MEMORY_BASE_1 >> 2): |
| 336 | fake_cb_bridge_regs.mem_base1 = data; |
| 337 | break; |
| 338 | |
| 339 | case (PCI_CB_MEMORY_LIMIT_1 >> 2): |
| 340 | fake_cb_bridge_regs.mem_limit1 = data; |
| 341 | break; |
| 342 | |
| 343 | case (PCI_CB_IO_BASE_0 >> 2): |
| 344 | fake_cb_bridge_regs.io_base0 = data; |
| 345 | break; |
| 346 | |
| 347 | case (PCI_CB_IO_LIMIT_0 >> 2): |
| 348 | fake_cb_bridge_regs.io_limit0 = data; |
| 349 | break; |
| 350 | |
| 351 | case (PCI_CB_IO_BASE_1 >> 2): |
| 352 | fake_cb_bridge_regs.io_base1 = data; |
| 353 | break; |
| 354 | |
| 355 | case (PCI_CB_IO_LIMIT_1 >> 2): |
| 356 | fake_cb_bridge_regs.io_limit1 = data; |
| 357 | break; |
| 358 | } |
| 359 | |
| 360 | return PCIBIOS_SUCCESSFUL; |
| 361 | } |
| 362 | |
| 363 | static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn, |
| 364 | int where, int size, u32 *val) |
| 365 | { |
| 366 | /* snoop access to slot 0x1e on root bus, we fake a cardbus |
| 367 | * bridge at this location */ |
| 368 | if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { |
| 369 | fake_cb_bridge_bus_number = bus->number; |
| 370 | return fake_cb_bridge_read(where, size, val); |
| 371 | } |
| 372 | |
Ralf Baechle | 7034228 | 2013-01-22 12:59:30 +0100 | [diff] [blame] | 373 | /* a configuration cycle for the device behind the cardbus |
| 374 | * bridge is actually done as a type 0 cycle on the primary |
Maxime Bizon | e7300d0 | 2009-08-18 13:23:37 +0100 | [diff] [blame] | 375 | * bus. This means that only one device can be on the cardbus |
| 376 | * bus */ |
| 377 | if (fake_cb_bridge_regs.bus_assigned && |
| 378 | bus->number == fake_cb_bridge_regs.cardbus_busn && |
| 379 | PCI_SLOT(devfn) == 0) |
| 380 | return bcm63xx_do_cfg_read(0, 0, |
| 381 | PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), |
| 382 | where, size, val); |
| 383 | |
| 384 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 385 | } |
| 386 | |
| 387 | static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn, |
| 388 | int where, int size, u32 val) |
| 389 | { |
| 390 | if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { |
| 391 | fake_cb_bridge_bus_number = bus->number; |
| 392 | return fake_cb_bridge_write(where, size, val); |
| 393 | } |
| 394 | |
| 395 | if (fake_cb_bridge_regs.bus_assigned && |
| 396 | bus->number == fake_cb_bridge_regs.cardbus_busn && |
| 397 | PCI_SLOT(devfn) == 0) |
| 398 | return bcm63xx_do_cfg_write(0, 0, |
| 399 | PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), |
| 400 | where, size, val); |
| 401 | |
| 402 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 403 | } |
| 404 | |
| 405 | struct pci_ops bcm63xx_cb_ops = { |
Ralf Baechle | 7034228 | 2013-01-22 12:59:30 +0100 | [diff] [blame] | 406 | .read = bcm63xx_cb_read, |
| 407 | .write = bcm63xx_cb_write, |
Maxime Bizon | e7300d0 | 2009-08-18 13:23:37 +0100 | [diff] [blame] | 408 | }; |
| 409 | |
| 410 | /* |
| 411 | * only one IO window, so it cannot be shared by PCI and cardbus, use |
| 412 | * fixup to choose and detect unhandled configuration |
| 413 | */ |
Greg Kroah-Hartman | 28eb0e4 | 2012-12-21 14:04:39 -0800 | [diff] [blame] | 414 | static void bcm63xx_fixup(struct pci_dev *dev) |
Maxime Bizon | e7300d0 | 2009-08-18 13:23:37 +0100 | [diff] [blame] | 415 | { |
| 416 | static int io_window = -1; |
| 417 | int i, found, new_io_window; |
| 418 | u32 val; |
| 419 | |
| 420 | /* look for any io resource */ |
| 421 | found = 0; |
| 422 | for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
| 423 | if (pci_resource_flags(dev, i) & IORESOURCE_IO) { |
| 424 | found = 1; |
| 425 | break; |
| 426 | } |
| 427 | } |
| 428 | |
| 429 | if (!found) |
| 430 | return; |
| 431 | |
| 432 | /* skip our fake bus with only cardbus bridge on it */ |
| 433 | if (dev->bus->number == fake_cb_bridge_bus_number) |
| 434 | return; |
| 435 | |
| 436 | /* find on which bus the device is */ |
| 437 | if (fake_cb_bridge_regs.bus_assigned && |
| 438 | dev->bus->number == fake_cb_bridge_regs.cardbus_busn && |
| 439 | PCI_SLOT(dev->devfn) == 0) |
| 440 | new_io_window = 1; |
| 441 | else |
| 442 | new_io_window = 0; |
| 443 | |
| 444 | if (new_io_window == io_window) |
| 445 | return; |
| 446 | |
| 447 | if (io_window != -1) { |
| 448 | printk(KERN_ERR "bcm63xx: both PCI and cardbus devices " |
| 449 | "need IO, which hardware cannot do\n"); |
| 450 | return; |
| 451 | } |
| 452 | |
| 453 | printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n", |
| 454 | (new_io_window == 0) ? "PCI" : "cardbus"); |
| 455 | |
| 456 | val = bcm_mpi_readl(MPI_L2PIOREMAP_REG); |
| 457 | if (io_window) |
| 458 | val |= MPI_L2PREMAP_IS_CARDBUS_MASK; |
| 459 | else |
| 460 | val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK; |
| 461 | bcm_mpi_writel(val, MPI_L2PIOREMAP_REG); |
| 462 | |
| 463 | io_window = new_io_window; |
| 464 | } |
| 465 | |
| 466 | DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup); |
| 467 | #endif |
Jonas Gorski | 19c860d | 2012-07-24 16:33:13 +0200 | [diff] [blame] | 468 | |
| 469 | static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn) |
| 470 | { |
| 471 | switch (bus->number) { |
| 472 | case PCIE_BUS_BRIDGE: |
| 473 | return (PCI_SLOT(devfn) == 0); |
| 474 | case PCIE_BUS_DEVICE: |
| 475 | if (PCI_SLOT(devfn) == 0) |
| 476 | return bcm_pcie_readl(PCIE_DLSTATUS_REG) |
| 477 | & DLSTATUS_PHYLINKUP; |
| 478 | default: |
| 479 | return false; |
| 480 | } |
| 481 | } |
| 482 | |
| 483 | static int bcm63xx_pcie_read(struct pci_bus *bus, unsigned int devfn, |
| 484 | int where, int size, u32 *val) |
| 485 | { |
| 486 | u32 data; |
| 487 | u32 reg = where & ~3; |
| 488 | |
| 489 | if (!bcm63xx_pcie_can_access(bus, devfn)) |
| 490 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 491 | |
| 492 | if (bus->number == PCIE_BUS_DEVICE) |
| 493 | reg += PCIE_DEVICE_OFFSET; |
| 494 | |
| 495 | data = bcm_pcie_readl(reg); |
| 496 | |
| 497 | *val = postprocess_read(data, where, size); |
| 498 | |
| 499 | return PCIBIOS_SUCCESSFUL; |
| 500 | |
| 501 | } |
| 502 | |
| 503 | static int bcm63xx_pcie_write(struct pci_bus *bus, unsigned int devfn, |
| 504 | int where, int size, u32 val) |
| 505 | { |
| 506 | u32 data; |
| 507 | u32 reg = where & ~3; |
| 508 | |
| 509 | if (!bcm63xx_pcie_can_access(bus, devfn)) |
| 510 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 511 | |
| 512 | if (bus->number == PCIE_BUS_DEVICE) |
| 513 | reg += PCIE_DEVICE_OFFSET; |
| 514 | |
| 515 | |
| 516 | data = bcm_pcie_readl(reg); |
| 517 | |
| 518 | data = preprocess_write(data, val, where, size); |
| 519 | bcm_pcie_writel(data, reg); |
| 520 | |
| 521 | return PCIBIOS_SUCCESSFUL; |
| 522 | } |
| 523 | |
| 524 | |
| 525 | struct pci_ops bcm63xx_pcie_ops = { |
Ralf Baechle | 7034228 | 2013-01-22 12:59:30 +0100 | [diff] [blame] | 526 | .read = bcm63xx_pcie_read, |
| 527 | .write = bcm63xx_pcie_write |
Jonas Gorski | 19c860d | 2012-07-24 16:33:13 +0200 | [diff] [blame] | 528 | }; |