Alan Cox | 806c35f | 2006-01-18 17:44:08 -0800 | [diff] [blame] | 1 | /* |
| 2 | * AMD 76x Memory Controller kernel module |
| 3 | * (C) 2003 Linux Networx (http://lnxi.com) |
| 4 | * This file may be distributed under the terms of the |
| 5 | * GNU General Public License. |
| 6 | * |
| 7 | * Written by Thayne Harbaugh |
| 8 | * Based on work by Dan Hollis <goemon at anime dot net> and others. |
| 9 | * http://www.anime.net/~goemon/linux-ecc/ |
| 10 | * |
| 11 | * $Id: edac_amd76x.c,v 1.4.2.5 2005/10/05 00:43:44 dsp_llnl Exp $ |
| 12 | * |
| 13 | */ |
| 14 | |
| 15 | |
| 16 | #include <linux/config.h> |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/init.h> |
| 19 | |
| 20 | #include <linux/pci.h> |
| 21 | #include <linux/pci_ids.h> |
| 22 | |
| 23 | #include <linux/slab.h> |
| 24 | |
| 25 | #include "edac_mc.h" |
| 26 | |
| 27 | |
| 28 | #define AMD76X_NR_CSROWS 8 |
| 29 | #define AMD76X_NR_CHANS 1 |
| 30 | #define AMD76X_NR_DIMMS 4 |
| 31 | |
| 32 | |
| 33 | /* AMD 76x register addresses - device 0 function 0 - PCI bridge */ |
| 34 | #define AMD76X_ECC_MODE_STATUS 0x48 /* Mode and status of ECC (32b) |
| 35 | * |
| 36 | * 31:16 reserved |
| 37 | * 15:14 SERR enabled: x1=ue 1x=ce |
| 38 | * 13 reserved |
| 39 | * 12 diag: disabled, enabled |
| 40 | * 11:10 mode: dis, EC, ECC, ECC+scrub |
| 41 | * 9:8 status: x1=ue 1x=ce |
| 42 | * 7:4 UE cs row |
| 43 | * 3:0 CE cs row |
| 44 | */ |
| 45 | #define AMD76X_DRAM_MODE_STATUS 0x58 /* DRAM Mode and status (32b) |
| 46 | * |
| 47 | * 31:26 clock disable 5 - 0 |
| 48 | * 25 SDRAM init |
| 49 | * 24 reserved |
| 50 | * 23 mode register service |
| 51 | * 22:21 suspend to RAM |
| 52 | * 20 burst refresh enable |
| 53 | * 19 refresh disable |
| 54 | * 18 reserved |
| 55 | * 17:16 cycles-per-refresh |
| 56 | * 15:8 reserved |
| 57 | * 7:0 x4 mode enable 7 - 0 |
| 58 | */ |
| 59 | #define AMD76X_MEM_BASE_ADDR 0xC0 /* Memory base address (8 x 32b) |
| 60 | * |
| 61 | * 31:23 chip-select base |
| 62 | * 22:16 reserved |
| 63 | * 15:7 chip-select mask |
| 64 | * 6:3 reserved |
| 65 | * 2:1 address mode |
| 66 | * 0 chip-select enable |
| 67 | */ |
| 68 | |
| 69 | |
| 70 | struct amd76x_error_info { |
| 71 | u32 ecc_mode_status; |
| 72 | }; |
| 73 | |
| 74 | |
| 75 | enum amd76x_chips { |
| 76 | AMD761 = 0, |
| 77 | AMD762 |
| 78 | }; |
| 79 | |
| 80 | |
| 81 | struct amd76x_dev_info { |
| 82 | const char *ctl_name; |
| 83 | }; |
| 84 | |
| 85 | |
| 86 | static const struct amd76x_dev_info amd76x_devs[] = { |
| 87 | [AMD761] = {.ctl_name = "AMD761"}, |
| 88 | [AMD762] = {.ctl_name = "AMD762"}, |
| 89 | }; |
| 90 | |
| 91 | |
| 92 | /** |
| 93 | * amd76x_get_error_info - fetch error information |
| 94 | * @mci: Memory controller |
| 95 | * @info: Info to fill in |
| 96 | * |
| 97 | * Fetch and store the AMD76x ECC status. Clear pending status |
| 98 | * on the chip so that further errors will be reported |
| 99 | */ |
| 100 | |
| 101 | static void amd76x_get_error_info (struct mem_ctl_info *mci, |
| 102 | struct amd76x_error_info *info) |
| 103 | { |
| 104 | pci_read_config_dword(mci->pdev, AMD76X_ECC_MODE_STATUS, |
| 105 | &info->ecc_mode_status); |
| 106 | |
| 107 | if (info->ecc_mode_status & BIT(8)) |
| 108 | pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, |
| 109 | (u32) BIT(8), (u32) BIT(8)); |
| 110 | |
| 111 | if (info->ecc_mode_status & BIT(9)) |
| 112 | pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, |
| 113 | (u32) BIT(9), (u32) BIT(9)); |
| 114 | } |
| 115 | |
| 116 | |
| 117 | /** |
| 118 | * amd76x_process_error_info - Error check |
| 119 | * @mci: Memory controller |
| 120 | * @info: Previously fetched information from chip |
| 121 | * @handle_errors: 1 if we should do recovery |
| 122 | * |
| 123 | * Process the chip state and decide if an error has occurred. |
| 124 | * A return of 1 indicates an error. Also if handle_errors is true |
| 125 | * then attempt to handle and clean up after the error |
| 126 | */ |
| 127 | |
| 128 | static int amd76x_process_error_info (struct mem_ctl_info *mci, |
| 129 | struct amd76x_error_info *info, int handle_errors) |
| 130 | { |
| 131 | int error_found; |
| 132 | u32 row; |
| 133 | |
| 134 | error_found = 0; |
| 135 | |
| 136 | /* |
| 137 | * Check for an uncorrectable error |
| 138 | */ |
| 139 | if (info->ecc_mode_status & BIT(8)) { |
| 140 | error_found = 1; |
| 141 | |
| 142 | if (handle_errors) { |
| 143 | row = (info->ecc_mode_status >> 4) & 0xf; |
| 144 | edac_mc_handle_ue(mci, |
| 145 | mci->csrows[row].first_page, 0, row, |
| 146 | mci->ctl_name); |
| 147 | } |
| 148 | } |
| 149 | |
| 150 | /* |
| 151 | * Check for a correctable error |
| 152 | */ |
| 153 | if (info->ecc_mode_status & BIT(9)) { |
| 154 | error_found = 1; |
| 155 | |
| 156 | if (handle_errors) { |
| 157 | row = info->ecc_mode_status & 0xf; |
| 158 | edac_mc_handle_ce(mci, |
| 159 | mci->csrows[row].first_page, 0, 0, row, 0, |
| 160 | mci->ctl_name); |
| 161 | } |
| 162 | } |
| 163 | return error_found; |
| 164 | } |
| 165 | |
| 166 | /** |
| 167 | * amd76x_check - Poll the controller |
| 168 | * @mci: Memory controller |
| 169 | * |
| 170 | * Called by the poll handlers this function reads the status |
| 171 | * from the controller and checks for errors. |
| 172 | */ |
| 173 | |
| 174 | static void amd76x_check(struct mem_ctl_info *mci) |
| 175 | { |
| 176 | struct amd76x_error_info info; |
| 177 | debugf3("MC: " __FILE__ ": %s()\n", __func__); |
| 178 | amd76x_get_error_info(mci, &info); |
| 179 | amd76x_process_error_info(mci, &info, 1); |
| 180 | } |
| 181 | |
| 182 | |
| 183 | /** |
| 184 | * amd76x_probe1 - Perform set up for detected device |
| 185 | * @pdev; PCI device detected |
| 186 | * @dev_idx: Device type index |
| 187 | * |
| 188 | * We have found an AMD76x and now need to set up the memory |
| 189 | * controller status reporting. We configure and set up the |
| 190 | * memory controller reporting and claim the device. |
| 191 | */ |
| 192 | |
| 193 | static int amd76x_probe1(struct pci_dev *pdev, int dev_idx) |
| 194 | { |
| 195 | int rc = -ENODEV; |
| 196 | int index; |
| 197 | struct mem_ctl_info *mci = NULL; |
| 198 | enum edac_type ems_modes[] = { |
| 199 | EDAC_NONE, |
| 200 | EDAC_EC, |
| 201 | EDAC_SECDED, |
| 202 | EDAC_SECDED |
| 203 | }; |
| 204 | u32 ems; |
| 205 | u32 ems_mode; |
| 206 | |
| 207 | debugf0("MC: " __FILE__ ": %s()\n", __func__); |
| 208 | |
| 209 | pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS, &ems); |
| 210 | ems_mode = (ems >> 10) & 0x3; |
| 211 | |
| 212 | mci = edac_mc_alloc(0, AMD76X_NR_CSROWS, AMD76X_NR_CHANS); |
| 213 | |
| 214 | if (mci == NULL) { |
| 215 | rc = -ENOMEM; |
| 216 | goto fail; |
| 217 | } |
| 218 | |
| 219 | debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); |
| 220 | |
| 221 | mci->pdev = pci_dev_get(pdev); |
| 222 | mci->mtype_cap = MEM_FLAG_RDDR; |
| 223 | |
| 224 | mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; |
| 225 | mci->edac_cap = ems_mode ? |
| 226 | (EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE; |
| 227 | |
| 228 | mci->mod_name = BS_MOD_STR; |
| 229 | mci->mod_ver = "$Revision: 1.4.2.5 $"; |
| 230 | mci->ctl_name = amd76x_devs[dev_idx].ctl_name; |
| 231 | mci->edac_check = amd76x_check; |
| 232 | mci->ctl_page_to_phys = NULL; |
| 233 | |
| 234 | for (index = 0; index < mci->nr_csrows; index++) { |
| 235 | struct csrow_info *csrow = &mci->csrows[index]; |
| 236 | u32 mba; |
| 237 | u32 mba_base; |
| 238 | u32 mba_mask; |
| 239 | u32 dms; |
| 240 | |
| 241 | /* find the DRAM Chip Select Base address and mask */ |
| 242 | pci_read_config_dword(mci->pdev, |
| 243 | AMD76X_MEM_BASE_ADDR + (index * 4), |
| 244 | &mba); |
| 245 | |
| 246 | if (!(mba & BIT(0))) |
| 247 | continue; |
| 248 | |
| 249 | mba_base = mba & 0xff800000UL; |
| 250 | mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL; |
| 251 | |
| 252 | pci_read_config_dword(mci->pdev, AMD76X_DRAM_MODE_STATUS, |
| 253 | &dms); |
| 254 | |
| 255 | csrow->first_page = mba_base >> PAGE_SHIFT; |
| 256 | csrow->nr_pages = (mba_mask + 1) >> PAGE_SHIFT; |
| 257 | csrow->last_page = csrow->first_page + csrow->nr_pages - 1; |
| 258 | csrow->page_mask = mba_mask >> PAGE_SHIFT; |
| 259 | csrow->grain = csrow->nr_pages << PAGE_SHIFT; |
| 260 | csrow->mtype = MEM_RDDR; |
| 261 | csrow->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN; |
| 262 | csrow->edac_mode = ems_modes[ems_mode]; |
| 263 | } |
| 264 | |
| 265 | /* clear counters */ |
| 266 | pci_write_bits32(mci->pdev, AMD76X_ECC_MODE_STATUS, (u32) (0x3 << 8), |
| 267 | (u32) (0x3 << 8)); |
| 268 | |
| 269 | if (edac_mc_add_mc(mci)) { |
| 270 | debugf3("MC: " __FILE__ |
| 271 | ": %s(): failed edac_mc_add_mc()\n", __func__); |
| 272 | goto fail; |
| 273 | } |
| 274 | |
| 275 | /* get this far and it's successful */ |
| 276 | debugf3("MC: " __FILE__ ": %s(): success\n", __func__); |
| 277 | return 0; |
| 278 | |
| 279 | fail: |
| 280 | if (mci) { |
| 281 | if(mci->pdev) |
| 282 | pci_dev_put(mci->pdev); |
| 283 | edac_mc_free(mci); |
| 284 | } |
| 285 | return rc; |
| 286 | } |
| 287 | |
| 288 | /* returns count (>= 0), or negative on error */ |
| 289 | static int __devinit amd76x_init_one(struct pci_dev *pdev, |
| 290 | const struct pci_device_id *ent) |
| 291 | { |
| 292 | debugf0("MC: " __FILE__ ": %s()\n", __func__); |
| 293 | |
| 294 | /* don't need to call pci_device_enable() */ |
| 295 | return amd76x_probe1(pdev, ent->driver_data); |
| 296 | } |
| 297 | |
| 298 | |
| 299 | /** |
| 300 | * amd76x_remove_one - driver shutdown |
| 301 | * @pdev: PCI device being handed back |
| 302 | * |
| 303 | * Called when the driver is unloaded. Find the matching mci |
| 304 | * structure for the device then delete the mci and free the |
| 305 | * resources. |
| 306 | */ |
| 307 | |
| 308 | static void __devexit amd76x_remove_one(struct pci_dev *pdev) |
| 309 | { |
| 310 | struct mem_ctl_info *mci; |
| 311 | |
| 312 | debugf0(__FILE__ ": %s()\n", __func__); |
| 313 | |
| 314 | if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL) |
| 315 | return; |
| 316 | if (edac_mc_del_mc(mci)) |
| 317 | return; |
| 318 | pci_dev_put(mci->pdev); |
| 319 | edac_mc_free(mci); |
| 320 | } |
| 321 | |
| 322 | |
| 323 | static const struct pci_device_id amd76x_pci_tbl[] __devinitdata = { |
| 324 | {PCI_VEND_DEV(AMD, FE_GATE_700C), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 325 | AMD762}, |
| 326 | {PCI_VEND_DEV(AMD, FE_GATE_700E), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| 327 | AMD761}, |
| 328 | {0,} /* 0 terminated list. */ |
| 329 | }; |
| 330 | |
| 331 | MODULE_DEVICE_TABLE(pci, amd76x_pci_tbl); |
| 332 | |
| 333 | |
| 334 | static struct pci_driver amd76x_driver = { |
| 335 | .name = BS_MOD_STR, |
| 336 | .probe = amd76x_init_one, |
| 337 | .remove = __devexit_p(amd76x_remove_one), |
| 338 | .id_table = amd76x_pci_tbl, |
| 339 | }; |
| 340 | |
Alan Cox | da9bb1d | 2006-01-18 17:44:13 -0800 | [diff] [blame] | 341 | static int __init amd76x_init(void) |
Alan Cox | 806c35f | 2006-01-18 17:44:08 -0800 | [diff] [blame] | 342 | { |
| 343 | return pci_register_driver(&amd76x_driver); |
| 344 | } |
| 345 | |
| 346 | static void __exit amd76x_exit(void) |
| 347 | { |
| 348 | pci_unregister_driver(&amd76x_driver); |
| 349 | } |
| 350 | |
| 351 | module_init(amd76x_init); |
| 352 | module_exit(amd76x_exit); |
| 353 | |
| 354 | MODULE_LICENSE("GPL"); |
| 355 | MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); |
| 356 | MODULE_DESCRIPTION("MC support for AMD 76x memory controllers"); |