blob: b3e22893a002acc73d76b4825c653ca6aaafea1a [file] [log] [blame]
Hans Verkuil31325832016-06-17 09:17:57 -03001/*
2 * cec - HDMI Consumer Electronics Control public header
3 *
4 * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
5 *
6 * This program is free software; you may redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
9 *
Hans Verkuil12655442016-06-30 07:01:41 -030010 * Alternatively you can redistribute this file under the terms of the
11 * BSD license as stated below:
12 *
13 * Redistribution and use in source and binary forms, with or without
14 * modification, are permitted provided that the following conditions
15 * are met:
16 * 1. Redistributions of source code must retain the above copyright
17 * notice, this list of conditions and the following disclaimer.
18 * 2. Redistributions in binary form must reproduce the above copyright
19 * notice, this list of conditions and the following disclaimer in
20 * the documentation and/or other materials provided with the
21 * distribution.
22 * 3. The names of its contributors may not be used to endorse or promote
23 * products derived from this software without specific prior written
24 * permission.
25 *
Hans Verkuil31325832016-06-17 09:17:57 -030026 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
27 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
28 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
29 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
30 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
31 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
32 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
33 * SOFTWARE.
34 */
35
36/*
37 * Note: this framework is still in staging and it is likely the API
38 * will change before it goes out of staging.
39 *
40 * Once it is moved out of staging this header will move to uapi.
41 */
42#ifndef _CEC_UAPI_H
43#define _CEC_UAPI_H
44
45#include <linux/types.h>
46
47#define CEC_MAX_MSG_SIZE 16
48
49/**
50 * struct cec_msg - CEC message structure.
Hans Verkuil980e0b362016-07-12 11:10:42 -030051 * @tx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the
52 * driver when the message transmission has finished.
53 * @rx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the
54 * driver when the message was received.
Hans Verkuil31325832016-06-17 09:17:57 -030055 * @len: Length in bytes of the message.
56 * @timeout: The timeout (in ms) that is used to timeout CEC_RECEIVE.
57 * Set to 0 if you want to wait forever. This timeout can also be
58 * used with CEC_TRANSMIT as the timeout for waiting for a reply.
59 * If 0, then it will use a 1 second timeout instead of waiting
60 * forever as is done with CEC_RECEIVE.
61 * @sequence: The framework assigns a sequence number to messages that are
62 * sent. This can be used to track replies to previously sent
63 * messages.
64 * @flags: Set to 0.
Hans Verkuil31325832016-06-17 09:17:57 -030065 * @msg: The message payload.
66 * @reply: This field is ignored with CEC_RECEIVE and is only used by
67 * CEC_TRANSMIT. If non-zero, then wait for a reply with this
68 * opcode. Set to CEC_MSG_FEATURE_ABORT if you want to wait for
69 * a possible ABORT reply. If there was an error when sending the
70 * msg or FeatureAbort was returned, then reply is set to 0.
71 * If reply is non-zero upon return, then len/msg are set to
72 * the received message.
73 * If reply is zero upon return and status has the
74 * CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to
75 * the received feature abort message.
76 * If reply is zero upon return and status has the
77 * CEC_TX_STATUS_MAX_RETRIES bit set, then no reply was seen at
78 * all. If reply is non-zero for CEC_TRANSMIT and the message is a
79 * broadcast, then -EINVAL is returned.
80 * if reply is non-zero, then timeout is set to 1000 (the required
81 * maximum response time).
Hans Verkuil980e0b362016-07-12 11:10:42 -030082 * @rx_status: The message receive status bits. Set by the driver.
83 * @tx_status: The message transmit status bits. Set by the driver.
Hans Verkuil31325832016-06-17 09:17:57 -030084 * @tx_arb_lost_cnt: The number of 'Arbitration Lost' events. Set by the driver.
85 * @tx_nack_cnt: The number of 'Not Acknowledged' events. Set by the driver.
86 * @tx_low_drive_cnt: The number of 'Low Drive Detected' events. Set by the
87 * driver.
88 * @tx_error_cnt: The number of 'Error' events. Set by the driver.
89 */
90struct cec_msg {
Hans Verkuil980e0b362016-07-12 11:10:42 -030091 __u64 tx_ts;
92 __u64 rx_ts;
Hans Verkuil31325832016-06-17 09:17:57 -030093 __u32 len;
94 __u32 timeout;
95 __u32 sequence;
96 __u32 flags;
Hans Verkuil31325832016-06-17 09:17:57 -030097 __u8 msg[CEC_MAX_MSG_SIZE];
98 __u8 reply;
Hans Verkuil980e0b362016-07-12 11:10:42 -030099 __u8 rx_status;
100 __u8 tx_status;
Hans Verkuil31325832016-06-17 09:17:57 -0300101 __u8 tx_arb_lost_cnt;
102 __u8 tx_nack_cnt;
103 __u8 tx_low_drive_cnt;
104 __u8 tx_error_cnt;
105};
106
107/**
108 * cec_msg_initiator - return the initiator's logical address.
109 * @msg: the message structure
110 */
111static inline __u8 cec_msg_initiator(const struct cec_msg *msg)
112{
113 return msg->msg[0] >> 4;
114}
115
116/**
117 * cec_msg_destination - return the destination's logical address.
118 * @msg: the message structure
119 */
120static inline __u8 cec_msg_destination(const struct cec_msg *msg)
121{
122 return msg->msg[0] & 0xf;
123}
124
125/**
126 * cec_msg_opcode - return the opcode of the message, -1 for poll
127 * @msg: the message structure
128 */
129static inline int cec_msg_opcode(const struct cec_msg *msg)
130{
131 return msg->len > 1 ? msg->msg[1] : -1;
132}
133
134/**
135 * cec_msg_is_broadcast - return true if this is a broadcast message.
136 * @msg: the message structure
137 */
138static inline bool cec_msg_is_broadcast(const struct cec_msg *msg)
139{
140 return (msg->msg[0] & 0xf) == 0xf;
141}
142
143/**
144 * cec_msg_init - initialize the message structure.
145 * @msg: the message structure
146 * @initiator: the logical address of the initiator
147 * @destination:the logical address of the destination (0xf for broadcast)
148 *
149 * The whole structure is zeroed, the len field is set to 1 (i.e. a poll
150 * message) and the initiator and destination are filled in.
151 */
152static inline void cec_msg_init(struct cec_msg *msg,
153 __u8 initiator, __u8 destination)
154{
155 memset(msg, 0, sizeof(*msg));
156 msg->msg[0] = (initiator << 4) | destination;
157 msg->len = 1;
158}
159
160/**
161 * cec_msg_set_reply_to - fill in destination/initiator in a reply message.
162 * @msg: the message structure for the reply
163 * @orig: the original message structure
164 *
165 * Set the msg destination to the orig initiator and the msg initiator to the
166 * orig destination. Note that msg and orig may be the same pointer, in which
167 * case the change is done in place.
168 */
169static inline void cec_msg_set_reply_to(struct cec_msg *msg,
170 struct cec_msg *orig)
171{
172 /* The destination becomes the initiator and vice versa */
173 msg->msg[0] = (cec_msg_destination(orig) << 4) |
174 cec_msg_initiator(orig);
175 msg->reply = msg->timeout = 0;
176}
177
178/* cec status field */
179#define CEC_TX_STATUS_OK (1 << 0)
180#define CEC_TX_STATUS_ARB_LOST (1 << 1)
181#define CEC_TX_STATUS_NACK (1 << 2)
182#define CEC_TX_STATUS_LOW_DRIVE (1 << 3)
183#define CEC_TX_STATUS_ERROR (1 << 4)
184#define CEC_TX_STATUS_MAX_RETRIES (1 << 5)
185
186#define CEC_RX_STATUS_OK (1 << 0)
187#define CEC_RX_STATUS_TIMEOUT (1 << 1)
188#define CEC_RX_STATUS_FEATURE_ABORT (1 << 2)
189
190static inline bool cec_msg_status_is_ok(const struct cec_msg *msg)
191{
192 if (msg->tx_status && !(msg->tx_status & CEC_TX_STATUS_OK))
193 return false;
194 if (msg->rx_status && !(msg->rx_status & CEC_RX_STATUS_OK))
195 return false;
196 if (!msg->tx_status && !msg->rx_status)
197 return false;
198 return !(msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT);
199}
200
201#define CEC_LOG_ADDR_INVALID 0xff
202#define CEC_PHYS_ADDR_INVALID 0xffff
203
204/*
205 * The maximum number of logical addresses one device can be assigned to.
206 * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
207 * Analog Devices CEC hardware supports 3. So let's go wild and go for 4.
208 */
209#define CEC_MAX_LOG_ADDRS 4
210
211/* The logical addresses defined by CEC 2.0 */
212#define CEC_LOG_ADDR_TV 0
213#define CEC_LOG_ADDR_RECORD_1 1
214#define CEC_LOG_ADDR_RECORD_2 2
215#define CEC_LOG_ADDR_TUNER_1 3
216#define CEC_LOG_ADDR_PLAYBACK_1 4
217#define CEC_LOG_ADDR_AUDIOSYSTEM 5
218#define CEC_LOG_ADDR_TUNER_2 6
219#define CEC_LOG_ADDR_TUNER_3 7
220#define CEC_LOG_ADDR_PLAYBACK_2 8
221#define CEC_LOG_ADDR_RECORD_3 9
222#define CEC_LOG_ADDR_TUNER_4 10
223#define CEC_LOG_ADDR_PLAYBACK_3 11
224#define CEC_LOG_ADDR_BACKUP_1 12
225#define CEC_LOG_ADDR_BACKUP_2 13
226#define CEC_LOG_ADDR_SPECIFIC 14
227#define CEC_LOG_ADDR_UNREGISTERED 15 /* as initiator address */
228#define CEC_LOG_ADDR_BROADCAST 15 /* ad destination address */
229
230/* The logical address types that the CEC device wants to claim */
231#define CEC_LOG_ADDR_TYPE_TV 0
232#define CEC_LOG_ADDR_TYPE_RECORD 1
233#define CEC_LOG_ADDR_TYPE_TUNER 2
234#define CEC_LOG_ADDR_TYPE_PLAYBACK 3
235#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4
236#define CEC_LOG_ADDR_TYPE_SPECIFIC 5
237#define CEC_LOG_ADDR_TYPE_UNREGISTERED 6
238/*
239 * Switches should use UNREGISTERED.
240 * Processors should use SPECIFIC.
241 */
242
243#define CEC_LOG_ADDR_MASK_TV (1 << CEC_LOG_ADDR_TV)
244#define CEC_LOG_ADDR_MASK_RECORD ((1 << CEC_LOG_ADDR_RECORD_1) | \
245 (1 << CEC_LOG_ADDR_RECORD_2) | \
246 (1 << CEC_LOG_ADDR_RECORD_3))
247#define CEC_LOG_ADDR_MASK_TUNER ((1 << CEC_LOG_ADDR_TUNER_1) | \
248 (1 << CEC_LOG_ADDR_TUNER_2) | \
249 (1 << CEC_LOG_ADDR_TUNER_3) | \
250 (1 << CEC_LOG_ADDR_TUNER_4))
251#define CEC_LOG_ADDR_MASK_PLAYBACK ((1 << CEC_LOG_ADDR_PLAYBACK_1) | \
252 (1 << CEC_LOG_ADDR_PLAYBACK_2) | \
253 (1 << CEC_LOG_ADDR_PLAYBACK_3))
254#define CEC_LOG_ADDR_MASK_AUDIOSYSTEM (1 << CEC_LOG_ADDR_AUDIOSYSTEM)
255#define CEC_LOG_ADDR_MASK_BACKUP ((1 << CEC_LOG_ADDR_BACKUP_1) | \
256 (1 << CEC_LOG_ADDR_BACKUP_2))
257#define CEC_LOG_ADDR_MASK_SPECIFIC (1 << CEC_LOG_ADDR_SPECIFIC)
258#define CEC_LOG_ADDR_MASK_UNREGISTERED (1 << CEC_LOG_ADDR_UNREGISTERED)
259
260static inline bool cec_has_tv(__u16 log_addr_mask)
261{
262 return log_addr_mask & CEC_LOG_ADDR_MASK_TV;
263}
264
265static inline bool cec_has_record(__u16 log_addr_mask)
266{
267 return log_addr_mask & CEC_LOG_ADDR_MASK_RECORD;
268}
269
270static inline bool cec_has_tuner(__u16 log_addr_mask)
271{
272 return log_addr_mask & CEC_LOG_ADDR_MASK_TUNER;
273}
274
275static inline bool cec_has_playback(__u16 log_addr_mask)
276{
277 return log_addr_mask & CEC_LOG_ADDR_MASK_PLAYBACK;
278}
279
280static inline bool cec_has_audiosystem(__u16 log_addr_mask)
281{
282 return log_addr_mask & CEC_LOG_ADDR_MASK_AUDIOSYSTEM;
283}
284
285static inline bool cec_has_backup(__u16 log_addr_mask)
286{
287 return log_addr_mask & CEC_LOG_ADDR_MASK_BACKUP;
288}
289
290static inline bool cec_has_specific(__u16 log_addr_mask)
291{
292 return log_addr_mask & CEC_LOG_ADDR_MASK_SPECIFIC;
293}
294
295static inline bool cec_is_unregistered(__u16 log_addr_mask)
296{
297 return log_addr_mask & CEC_LOG_ADDR_MASK_UNREGISTERED;
298}
299
300static inline bool cec_is_unconfigured(__u16 log_addr_mask)
301{
302 return log_addr_mask == 0;
303}
304
305/*
306 * Use this if there is no vendor ID (CEC_G_VENDOR_ID) or if the vendor ID
307 * should be disabled (CEC_S_VENDOR_ID)
308 */
309#define CEC_VENDOR_ID_NONE 0xffffffff
310
311/* The message handling modes */
312/* Modes for initiator */
313#define CEC_MODE_NO_INITIATOR (0x0 << 0)
314#define CEC_MODE_INITIATOR (0x1 << 0)
315#define CEC_MODE_EXCL_INITIATOR (0x2 << 0)
316#define CEC_MODE_INITIATOR_MSK 0x0f
317
318/* Modes for follower */
319#define CEC_MODE_NO_FOLLOWER (0x0 << 4)
320#define CEC_MODE_FOLLOWER (0x1 << 4)
321#define CEC_MODE_EXCL_FOLLOWER (0x2 << 4)
322#define CEC_MODE_EXCL_FOLLOWER_PASSTHRU (0x3 << 4)
323#define CEC_MODE_MONITOR (0xe << 4)
324#define CEC_MODE_MONITOR_ALL (0xf << 4)
325#define CEC_MODE_FOLLOWER_MSK 0xf0
326
327/* Userspace has to configure the physical address */
328#define CEC_CAP_PHYS_ADDR (1 << 0)
329/* Userspace has to configure the logical addresses */
330#define CEC_CAP_LOG_ADDRS (1 << 1)
331/* Userspace can transmit messages (and thus become follower as well) */
332#define CEC_CAP_TRANSMIT (1 << 2)
333/*
334 * Passthrough all messages instead of processing them.
335 */
336#define CEC_CAP_PASSTHROUGH (1 << 3)
337/* Supports remote control */
338#define CEC_CAP_RC (1 << 4)
339/* Hardware can monitor all messages, not just directed and broadcast. */
340#define CEC_CAP_MONITOR_ALL (1 << 5)
341
342/**
343 * struct cec_caps - CEC capabilities structure.
344 * @driver: name of the CEC device driver.
345 * @name: name of the CEC device. @driver + @name must be unique.
346 * @available_log_addrs: number of available logical addresses.
347 * @capabilities: capabilities of the CEC adapter.
348 * @version: version of the CEC adapter framework.
349 */
350struct cec_caps {
351 char driver[32];
352 char name[32];
353 __u32 available_log_addrs;
354 __u32 capabilities;
355 __u32 version;
356};
357
358/**
359 * struct cec_log_addrs - CEC logical addresses structure.
360 * @log_addr: the claimed logical addresses. Set by the driver.
361 * @log_addr_mask: current logical address mask. Set by the driver.
362 * @cec_version: the CEC version that the adapter should implement. Set by the
363 * caller.
364 * @num_log_addrs: how many logical addresses should be claimed. Set by the
365 * caller.
366 * @vendor_id: the vendor ID of the device. Set by the caller.
367 * @flags: set to 0.
368 * @osd_name: the OSD name of the device. Set by the caller.
369 * @primary_device_type: the primary device type for each logical address.
370 * Set by the caller.
371 * @log_addr_type: the logical address types. Set by the caller.
372 * @all_device_types: CEC 2.0: all device types represented by the logical
373 * address. Set by the caller.
374 * @features: CEC 2.0: The logical address features. Set by the caller.
375 */
376struct cec_log_addrs {
377 __u8 log_addr[CEC_MAX_LOG_ADDRS];
378 __u16 log_addr_mask;
379 __u8 cec_version;
380 __u8 num_log_addrs;
381 __u32 vendor_id;
382 __u32 flags;
383 char osd_name[15];
384 __u8 primary_device_type[CEC_MAX_LOG_ADDRS];
385 __u8 log_addr_type[CEC_MAX_LOG_ADDRS];
386
387 /* CEC 2.0 */
388 __u8 all_device_types[CEC_MAX_LOG_ADDRS];
389 __u8 features[CEC_MAX_LOG_ADDRS][12];
390};
391
392/* Events */
393
394/* Event that occurs when the adapter state changes */
395#define CEC_EVENT_STATE_CHANGE 1
396/*
397 * This event is sent when messages are lost because the application
398 * didn't empty the message queue in time
399 */
400#define CEC_EVENT_LOST_MSGS 2
401
402#define CEC_EVENT_FL_INITIAL_STATE (1 << 0)
403
404/**
405 * struct cec_event_state_change - used when the CEC adapter changes state.
406 * @phys_addr: the current physical address
407 * @log_addr_mask: the current logical address mask
408 */
409struct cec_event_state_change {
410 __u16 phys_addr;
411 __u16 log_addr_mask;
412};
413
414/**
415 * struct cec_event_lost_msgs - tells you how many messages were lost due.
416 * @lost_msgs: how many messages were lost.
417 */
418struct cec_event_lost_msgs {
419 __u32 lost_msgs;
420};
421
422/**
423 * struct cec_event - CEC event structure
424 * @ts: the timestamp of when the event was sent.
425 * @event: the event.
426 * array.
427 * @state_change: the event payload for CEC_EVENT_STATE_CHANGE.
428 * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS.
429 * @raw: array to pad the union.
430 */
431struct cec_event {
432 __u64 ts;
433 __u32 event;
434 __u32 flags;
435 union {
436 struct cec_event_state_change state_change;
437 struct cec_event_lost_msgs lost_msgs;
438 __u32 raw[16];
439 };
440};
441
442/* ioctls */
443
444/* Adapter capabilities */
445#define CEC_ADAP_G_CAPS _IOWR('a', 0, struct cec_caps)
446
447/*
448 * phys_addr is either 0 (if this is the CEC root device)
449 * or a valid physical address obtained from the sink's EDID
450 * as read by this CEC device (if this is a source device)
451 * or a physical address obtained and modified from a sink
452 * EDID and used for a sink CEC device.
453 * If nothing is connected, then phys_addr is 0xffff.
454 * See HDMI 1.4b, section 8.7 (Physical Address).
455 *
456 * The CEC_ADAP_S_PHYS_ADDR ioctl may not be available if that is handled
457 * internally.
458 */
459#define CEC_ADAP_G_PHYS_ADDR _IOR('a', 1, __u16)
460#define CEC_ADAP_S_PHYS_ADDR _IOW('a', 2, __u16)
461
462/*
463 * Configure the CEC adapter. It sets the device type and which
464 * logical types it will try to claim. It will return which
465 * logical addresses it could actually claim.
466 * An error is returned if the adapter is disabled or if there
467 * is no physical address assigned.
468 */
469
470#define CEC_ADAP_G_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs)
471#define CEC_ADAP_S_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs)
472
473/* Transmit/receive a CEC command */
474#define CEC_TRANSMIT _IOWR('a', 5, struct cec_msg)
475#define CEC_RECEIVE _IOWR('a', 6, struct cec_msg)
476
477/* Dequeue CEC events */
478#define CEC_DQEVENT _IOWR('a', 7, struct cec_event)
479
480/*
481 * Get and set the message handling mode for this filehandle.
482 */
483#define CEC_G_MODE _IOR('a', 8, __u32)
484#define CEC_S_MODE _IOW('a', 9, __u32)
485
486/*
487 * The remainder of this header defines all CEC messages and operands.
488 * The format matters since it the cec-ctl utility parses it to generate
489 * code for implementing all these messages.
490 *
491 * Comments ending with 'Feature' group messages for each feature.
492 * If messages are part of multiple features, then the "Has also"
493 * comment is used to list the previously defined messages that are
494 * supported by the feature.
495 *
496 * Before operands are defined a comment is added that gives the
497 * name of the operand and in brackets the variable name of the
498 * corresponding argument in the cec-funcs.h function.
499 */
500
501/* Messages */
502
503/* One Touch Play Feature */
504#define CEC_MSG_ACTIVE_SOURCE 0x82
505#define CEC_MSG_IMAGE_VIEW_ON 0x04
506#define CEC_MSG_TEXT_VIEW_ON 0x0d
507
508
509/* Routing Control Feature */
510
511/*
512 * Has also:
513 * CEC_MSG_ACTIVE_SOURCE
514 */
515
516#define CEC_MSG_INACTIVE_SOURCE 0x9d
517#define CEC_MSG_REQUEST_ACTIVE_SOURCE 0x85
518#define CEC_MSG_ROUTING_CHANGE 0x80
519#define CEC_MSG_ROUTING_INFORMATION 0x81
520#define CEC_MSG_SET_STREAM_PATH 0x86
521
522
523/* Standby Feature */
524#define CEC_MSG_STANDBY 0x36
525
526
527/* One Touch Record Feature */
528#define CEC_MSG_RECORD_OFF 0x0b
529#define CEC_MSG_RECORD_ON 0x09
530/* Record Source Type Operand (rec_src_type) */
531#define CEC_OP_RECORD_SRC_OWN 1
532#define CEC_OP_RECORD_SRC_DIGITAL 2
533#define CEC_OP_RECORD_SRC_ANALOG 3
534#define CEC_OP_RECORD_SRC_EXT_PLUG 4
535#define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR 5
536/* Service Identification Method Operand (service_id_method) */
537#define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID 0
538#define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL 1
539/* Digital Service Broadcast System Operand (dig_bcast_system) */
540#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN 0x00
541#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN 0x01
542#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN 0x02
543#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS 0x08
544#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS 0x09
545#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T 0x0a
546#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE 0x10
547#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT 0x11
548#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T 0x12
549#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C 0x18
550#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S 0x19
551#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2 0x1a
552#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T 0x1b
553/* Analogue Broadcast Type Operand (ana_bcast_type) */
554#define CEC_OP_ANA_BCAST_TYPE_CABLE 0
555#define CEC_OP_ANA_BCAST_TYPE_SATELLITE 1
556#define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL 2
557/* Broadcast System Operand (bcast_system) */
558#define CEC_OP_BCAST_SYSTEM_PAL_BG 0x00
559#define CEC_OP_BCAST_SYSTEM_SECAM_LQ 0x01 /* SECAM L' */
560#define CEC_OP_BCAST_SYSTEM_PAL_M 0x02
561#define CEC_OP_BCAST_SYSTEM_NTSC_M 0x03
562#define CEC_OP_BCAST_SYSTEM_PAL_I 0x04
563#define CEC_OP_BCAST_SYSTEM_SECAM_DK 0x05
564#define CEC_OP_BCAST_SYSTEM_SECAM_BG 0x06
565#define CEC_OP_BCAST_SYSTEM_SECAM_L 0x07
566#define CEC_OP_BCAST_SYSTEM_PAL_DK 0x08
567#define CEC_OP_BCAST_SYSTEM_OTHER 0x1f
568/* Channel Number Format Operand (channel_number_fmt) */
569#define CEC_OP_CHANNEL_NUMBER_FMT_1_PART 0x01
570#define CEC_OP_CHANNEL_NUMBER_FMT_2_PART 0x02
571
572#define CEC_MSG_RECORD_STATUS 0x0a
573/* Record Status Operand (rec_status) */
574#define CEC_OP_RECORD_STATUS_CUR_SRC 0x01
575#define CEC_OP_RECORD_STATUS_DIG_SERVICE 0x02
576#define CEC_OP_RECORD_STATUS_ANA_SERVICE 0x03
577#define CEC_OP_RECORD_STATUS_EXT_INPUT 0x04
578#define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE 0x05
579#define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE 0x06
580#define CEC_OP_RECORD_STATUS_NO_SERVICE 0x07
581#define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG 0x09
582#define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR 0x0a
583#define CEC_OP_RECORD_STATUS_UNSUP_CA 0x0b
584#define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS 0x0c
585#define CEC_OP_RECORD_STATUS_CANT_COPY_SRC 0x0d
586#define CEC_OP_RECORD_STATUS_NO_MORE_COPIES 0x0e
587#define CEC_OP_RECORD_STATUS_NO_MEDIA 0x10
588#define CEC_OP_RECORD_STATUS_PLAYING 0x11
589#define CEC_OP_RECORD_STATUS_ALREADY_RECORDING 0x12
590#define CEC_OP_RECORD_STATUS_MEDIA_PROT 0x13
591#define CEC_OP_RECORD_STATUS_NO_SIGNAL 0x14
592#define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM 0x15
593#define CEC_OP_RECORD_STATUS_NO_SPACE 0x16
594#define CEC_OP_RECORD_STATUS_PARENTAL_LOCK 0x17
595#define CEC_OP_RECORD_STATUS_TERMINATED_OK 0x1a
596#define CEC_OP_RECORD_STATUS_ALREADY_TERM 0x1b
597#define CEC_OP_RECORD_STATUS_OTHER 0x1f
598
599#define CEC_MSG_RECORD_TV_SCREEN 0x0f
600
601
602/* Timer Programming Feature */
603#define CEC_MSG_CLEAR_ANALOGUE_TIMER 0x33
604/* Recording Sequence Operand (recording_seq) */
605#define CEC_OP_REC_SEQ_SUNDAY 0x01
606#define CEC_OP_REC_SEQ_MONDAY 0x02
607#define CEC_OP_REC_SEQ_TUESDAY 0x04
608#define CEC_OP_REC_SEQ_WEDNESDAY 0x08
609#define CEC_OP_REC_SEQ_THURSDAY 0x10
610#define CEC_OP_REC_SEQ_FRIDAY 0x20
611#define CEC_OP_REC_SEQ_SATERDAY 0x40
612#define CEC_OP_REC_SEQ_ONCE_ONLY 0x00
613
614#define CEC_MSG_CLEAR_DIGITAL_TIMER 0x99
615
616#define CEC_MSG_CLEAR_EXT_TIMER 0xa1
617/* External Source Specifier Operand (ext_src_spec) */
618#define CEC_OP_EXT_SRC_PLUG 0x04
619#define CEC_OP_EXT_SRC_PHYS_ADDR 0x05
620
621#define CEC_MSG_SET_ANALOGUE_TIMER 0x34
622#define CEC_MSG_SET_DIGITAL_TIMER 0x97
623#define CEC_MSG_SET_EXT_TIMER 0xa2
624
625#define CEC_MSG_SET_TIMER_PROGRAM_TITLE 0x67
626#define CEC_MSG_TIMER_CLEARED_STATUS 0x43
627/* Timer Cleared Status Data Operand (timer_cleared_status) */
628#define CEC_OP_TIMER_CLR_STAT_RECORDING 0x00
629#define CEC_OP_TIMER_CLR_STAT_NO_MATCHING 0x01
630#define CEC_OP_TIMER_CLR_STAT_NO_INFO 0x02
631#define CEC_OP_TIMER_CLR_STAT_CLEARED 0x80
632
633#define CEC_MSG_TIMER_STATUS 0x35
634/* Timer Overlap Warning Operand (timer_overlap_warning) */
635#define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP 0
636#define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP 1
637/* Media Info Operand (media_info) */
638#define CEC_OP_MEDIA_INFO_UNPROT_MEDIA 0
639#define CEC_OP_MEDIA_INFO_PROT_MEDIA 1
640#define CEC_OP_MEDIA_INFO_NO_MEDIA 2
641/* Programmed Indicator Operand (prog_indicator) */
642#define CEC_OP_PROG_IND_NOT_PROGRAMMED 0
643#define CEC_OP_PROG_IND_PROGRAMMED 1
644/* Programmed Info Operand (prog_info) */
645#define CEC_OP_PROG_INFO_ENOUGH_SPACE 0x08
646#define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE 0x09
647#define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE 0x0b
648#define CEC_OP_PROG_INFO_NONE_AVAILABLE 0x0a
649/* Not Programmed Error Info Operand (prog_error) */
650#define CEC_OP_PROG_ERROR_NO_FREE_TIMER 0x01
651#define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE 0x02
652#define CEC_OP_PROG_ERROR_REC_SEQ_ERROR 0x03
653#define CEC_OP_PROG_ERROR_INV_EXT_PLUG 0x04
654#define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR 0x05
655#define CEC_OP_PROG_ERROR_CA_UNSUPP 0x06
656#define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS 0x07
657#define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP 0x08
658#define CEC_OP_PROG_ERROR_PARENTAL_LOCK 0x09
659#define CEC_OP_PROG_ERROR_CLOCK_FAILURE 0x0a
660#define CEC_OP_PROG_ERROR_DUPLICATE 0x0e
661
662
663/* System Information Feature */
664#define CEC_MSG_CEC_VERSION 0x9e
665/* CEC Version Operand (cec_version) */
666#define CEC_OP_CEC_VERSION_1_3A 4
667#define CEC_OP_CEC_VERSION_1_4 5
668#define CEC_OP_CEC_VERSION_2_0 6
669
670#define CEC_MSG_GET_CEC_VERSION 0x9f
671#define CEC_MSG_GIVE_PHYSICAL_ADDR 0x83
672#define CEC_MSG_GET_MENU_LANGUAGE 0x91
673#define CEC_MSG_REPORT_PHYSICAL_ADDR 0x84
674/* Primary Device Type Operand (prim_devtype) */
675#define CEC_OP_PRIM_DEVTYPE_TV 0
676#define CEC_OP_PRIM_DEVTYPE_RECORD 1
677#define CEC_OP_PRIM_DEVTYPE_TUNER 3
678#define CEC_OP_PRIM_DEVTYPE_PLAYBACK 4
679#define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM 5
680#define CEC_OP_PRIM_DEVTYPE_SWITCH 6
681#define CEC_OP_PRIM_DEVTYPE_PROCESSOR 7
682
683#define CEC_MSG_SET_MENU_LANGUAGE 0x32
684#define CEC_MSG_REPORT_FEATURES 0xa6 /* HDMI 2.0 */
685/* All Device Types Operand (all_device_types) */
686#define CEC_OP_ALL_DEVTYPE_TV 0x80
687#define CEC_OP_ALL_DEVTYPE_RECORD 0x40
688#define CEC_OP_ALL_DEVTYPE_TUNER 0x20
689#define CEC_OP_ALL_DEVTYPE_PLAYBACK 0x10
690#define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM 0x08
691#define CEC_OP_ALL_DEVTYPE_SWITCH 0x04
692/*
693 * And if you wondering what happened to PROCESSOR devices: those should
694 * be mapped to a SWITCH.
695 */
696
697/* Valid for RC Profile and Device Feature operands */
698#define CEC_OP_FEAT_EXT 0x80 /* Extension bit */
699/* RC Profile Operand (rc_profile) */
700#define CEC_OP_FEAT_RC_TV_PROFILE_NONE 0x00
701#define CEC_OP_FEAT_RC_TV_PROFILE_1 0x02
702#define CEC_OP_FEAT_RC_TV_PROFILE_2 0x06
703#define CEC_OP_FEAT_RC_TV_PROFILE_3 0x0a
704#define CEC_OP_FEAT_RC_TV_PROFILE_4 0x0e
705#define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU 0x50
706#define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU 0x48
707#define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU 0x44
708#define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU 0x42
709#define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU 0x41
710/* Device Feature Operand (dev_features) */
711#define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN 0x40
712#define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING 0x20
713#define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL 0x10
714#define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE 0x08
715#define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX 0x04
716#define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX 0x02
717
718#define CEC_MSG_GIVE_FEATURES 0xa5 /* HDMI 2.0 */
719
720
721/* Deck Control Feature */
722#define CEC_MSG_DECK_CONTROL 0x42
723/* Deck Control Mode Operand (deck_control_mode) */
724#define CEC_OP_DECK_CTL_MODE_SKIP_FWD 1
725#define CEC_OP_DECK_CTL_MODE_SKIP_REV 2
726#define CEC_OP_DECK_CTL_MODE_STOP 3
727#define CEC_OP_DECK_CTL_MODE_EJECT 4
728
729#define CEC_MSG_DECK_STATUS 0x1b
730/* Deck Info Operand (deck_info) */
731#define CEC_OP_DECK_INFO_PLAY 0x11
732#define CEC_OP_DECK_INFO_RECORD 0x12
733#define CEC_OP_DECK_INFO_PLAY_REV 0x13
734#define CEC_OP_DECK_INFO_STILL 0x14
735#define CEC_OP_DECK_INFO_SLOW 0x15
736#define CEC_OP_DECK_INFO_SLOW_REV 0x16
737#define CEC_OP_DECK_INFO_FAST_FWD 0x17
738#define CEC_OP_DECK_INFO_FAST_REV 0x18
739#define CEC_OP_DECK_INFO_NO_MEDIA 0x19
740#define CEC_OP_DECK_INFO_STOP 0x1a
741#define CEC_OP_DECK_INFO_SKIP_FWD 0x1b
742#define CEC_OP_DECK_INFO_SKIP_REV 0x1c
743#define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD 0x1d
744#define CEC_OP_DECK_INFO_INDEX_SEARCH_REV 0x1e
745#define CEC_OP_DECK_INFO_OTHER 0x1f
746
747#define CEC_MSG_GIVE_DECK_STATUS 0x1a
748/* Status Request Operand (status_req) */
749#define CEC_OP_STATUS_REQ_ON 1
750#define CEC_OP_STATUS_REQ_OFF 2
751#define CEC_OP_STATUS_REQ_ONCE 3
752
753#define CEC_MSG_PLAY 0x41
754/* Play Mode Operand (play_mode) */
755#define CEC_OP_PLAY_MODE_PLAY_FWD 0x24
756#define CEC_OP_PLAY_MODE_PLAY_REV 0x20
757#define CEC_OP_PLAY_MODE_PLAY_STILL 0x25
758#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN 0x05
759#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED 0x06
760#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX 0x07
761#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN 0x09
762#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED 0x0a
763#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX 0x0b
764#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN 0x15
765#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED 0x16
766#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX 0x17
767#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN 0x19
768#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED 0x1a
769#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX 0x1b
770
771
772/* Tuner Control Feature */
773#define CEC_MSG_GIVE_TUNER_DEVICE_STATUS 0x08
774#define CEC_MSG_SELECT_ANALOGUE_SERVICE 0x92
775#define CEC_MSG_SELECT_DIGITAL_SERVICE 0x93
776#define CEC_MSG_TUNER_DEVICE_STATUS 0x07
777/* Recording Flag Operand (rec_flag) */
778#define CEC_OP_REC_FLAG_USED 0
779#define CEC_OP_REC_FLAG_NOT_USED 1
780/* Tuner Display Info Operand (tuner_display_info) */
781#define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL 0
782#define CEC_OP_TUNER_DISPLAY_INFO_NONE 1
783#define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE 2
784
785#define CEC_MSG_TUNER_STEP_DECREMENT 0x06
786#define CEC_MSG_TUNER_STEP_INCREMENT 0x05
787
788
789/* Vendor Specific Commands Feature */
790
791/*
792 * Has also:
793 * CEC_MSG_CEC_VERSION
794 * CEC_MSG_GET_CEC_VERSION
795 */
796#define CEC_MSG_DEVICE_VENDOR_ID 0x87
797#define CEC_MSG_GIVE_DEVICE_VENDOR_ID 0x8c
798#define CEC_MSG_VENDOR_COMMAND 0x89
799#define CEC_MSG_VENDOR_COMMAND_WITH_ID 0xa0
800#define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN 0x8a
801#define CEC_MSG_VENDOR_REMOTE_BUTTON_UP 0x8b
802
803
804/* OSD Display Feature */
805#define CEC_MSG_SET_OSD_STRING 0x64
806/* Display Control Operand (disp_ctl) */
807#define CEC_OP_DISP_CTL_DEFAULT 0x00
808#define CEC_OP_DISP_CTL_UNTIL_CLEARED 0x40
809#define CEC_OP_DISP_CTL_CLEAR 0x80
810
811
812/* Device OSD Transfer Feature */
813#define CEC_MSG_GIVE_OSD_NAME 0x46
814#define CEC_MSG_SET_OSD_NAME 0x47
815
816
817/* Device Menu Control Feature */
818#define CEC_MSG_MENU_REQUEST 0x8d
819/* Menu Request Type Operand (menu_req) */
820#define CEC_OP_MENU_REQUEST_ACTIVATE 0x00
821#define CEC_OP_MENU_REQUEST_DEACTIVATE 0x01
822#define CEC_OP_MENU_REQUEST_QUERY 0x02
823
824#define CEC_MSG_MENU_STATUS 0x8e
825/* Menu State Operand (menu_state) */
826#define CEC_OP_MENU_STATE_ACTIVATED 0x00
827#define CEC_OP_MENU_STATE_DEACTIVATED 0x01
828
829#define CEC_MSG_USER_CONTROL_PRESSED 0x44
830/* UI Broadcast Type Operand (ui_bcast_type) */
831#define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL 0x00
832#define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA 0x01
833#define CEC_OP_UI_BCAST_TYPE_ANALOGUE 0x10
834#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T 0x20
835#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE 0x30
836#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT 0x40
837#define CEC_OP_UI_BCAST_TYPE_DIGITAL 0x50
838#define CEC_OP_UI_BCAST_TYPE_DIGITAL_T 0x60
839#define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE 0x70
840#define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT 0x80
841#define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT 0x90
842#define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2 0x91
843#define CEC_OP_UI_BCAST_TYPE_IP 0xa0
844/* UI Sound Presentation Control Operand (ui_snd_pres_ctl) */
845#define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO 0x10
846#define CEC_OP_UI_SND_PRES_CTL_KARAOKE 0x20
847#define CEC_OP_UI_SND_PRES_CTL_DOWNMIX 0x80
848#define CEC_OP_UI_SND_PRES_CTL_REVERB 0x90
849#define CEC_OP_UI_SND_PRES_CTL_EQUALIZER 0xa0
850#define CEC_OP_UI_SND_PRES_CTL_BASS_UP 0xb1
851#define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL 0xb2
852#define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN 0xb3
853#define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP 0xc1
854#define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL 0xc2
855#define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN 0xc3
856
857#define CEC_MSG_USER_CONTROL_RELEASED 0x45
858
859
860/* Remote Control Passthrough Feature */
861
862/*
863 * Has also:
864 * CEC_MSG_USER_CONTROL_PRESSED
865 * CEC_MSG_USER_CONTROL_RELEASED
866 */
867
868
869/* Power Status Feature */
870#define CEC_MSG_GIVE_DEVICE_POWER_STATUS 0x8f
871#define CEC_MSG_REPORT_POWER_STATUS 0x90
872/* Power Status Operand (pwr_state) */
873#define CEC_OP_POWER_STATUS_ON 0
874#define CEC_OP_POWER_STATUS_STANDBY 1
875#define CEC_OP_POWER_STATUS_TO_ON 2
876#define CEC_OP_POWER_STATUS_TO_STANDBY 3
877
878
879/* General Protocol Messages */
880#define CEC_MSG_FEATURE_ABORT 0x00
881/* Abort Reason Operand (reason) */
882#define CEC_OP_ABORT_UNRECOGNIZED_OP 0
883#define CEC_OP_ABORT_INCORRECT_MODE 1
884#define CEC_OP_ABORT_NO_SOURCE 2
885#define CEC_OP_ABORT_INVALID_OP 3
886#define CEC_OP_ABORT_REFUSED 4
887#define CEC_OP_ABORT_UNDETERMINED 5
888
889#define CEC_MSG_ABORT 0xff
890
891
892/* System Audio Control Feature */
893
894/*
895 * Has also:
896 * CEC_MSG_USER_CONTROL_PRESSED
897 * CEC_MSG_USER_CONTROL_RELEASED
898 */
899#define CEC_MSG_GIVE_AUDIO_STATUS 0x71
900#define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d
901#define CEC_MSG_REPORT_AUDIO_STATUS 0x7a
902/* Audio Mute Status Operand (aud_mute_status) */
903#define CEC_OP_AUD_MUTE_STATUS_OFF 0
904#define CEC_OP_AUD_MUTE_STATUS_ON 1
905
906#define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR 0xa3
907#define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR 0xa4
908#define CEC_MSG_SET_SYSTEM_AUDIO_MODE 0x72
909/* System Audio Status Operand (sys_aud_status) */
910#define CEC_OP_SYS_AUD_STATUS_OFF 0
911#define CEC_OP_SYS_AUD_STATUS_ON 1
912
913#define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST 0x70
914#define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS 0x7e
915/* Audio Format ID Operand (audio_format_id) */
916#define CEC_OP_AUD_FMT_ID_CEA861 0
917#define CEC_OP_AUD_FMT_ID_CEA861_CXT 1
918
919
920/* Audio Rate Control Feature */
921#define CEC_MSG_SET_AUDIO_RATE 0x9a
922/* Audio Rate Operand (audio_rate) */
923#define CEC_OP_AUD_RATE_OFF 0
924#define CEC_OP_AUD_RATE_WIDE_STD 1
925#define CEC_OP_AUD_RATE_WIDE_FAST 2
926#define CEC_OP_AUD_RATE_WIDE_SLOW 3
927#define CEC_OP_AUD_RATE_NARROW_STD 4
928#define CEC_OP_AUD_RATE_NARROW_FAST 5
929#define CEC_OP_AUD_RATE_NARROW_SLOW 6
930
931
932/* Audio Return Channel Control Feature */
933#define CEC_MSG_INITIATE_ARC 0xc0
934#define CEC_MSG_REPORT_ARC_INITIATED 0xc1
935#define CEC_MSG_REPORT_ARC_TERMINATED 0xc2
936#define CEC_MSG_REQUEST_ARC_INITIATION 0xc3
937#define CEC_MSG_REQUEST_ARC_TERMINATION 0xc4
938#define CEC_MSG_TERMINATE_ARC 0xc5
939
940
941/* Dynamic Audio Lipsync Feature */
942/* Only for CEC 2.0 and up */
943#define CEC_MSG_REQUEST_CURRENT_LATENCY 0xa7
944#define CEC_MSG_REPORT_CURRENT_LATENCY 0xa8
945/* Low Latency Mode Operand (low_latency_mode) */
946#define CEC_OP_LOW_LATENCY_MODE_OFF 0
947#define CEC_OP_LOW_LATENCY_MODE_ON 1
948/* Audio Output Compensated Operand (audio_out_compensated) */
949#define CEC_OP_AUD_OUT_COMPENSATED_NA 0
950#define CEC_OP_AUD_OUT_COMPENSATED_DELAY 1
951#define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY 2
952#define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY 3
953
954
955/* Capability Discovery and Control Feature */
956#define CEC_MSG_CDC_MESSAGE 0xf8
957/* Ethernet-over-HDMI: nobody ever does this... */
958#define CEC_MSG_CDC_HEC_INQUIRE_STATE 0x00
959#define CEC_MSG_CDC_HEC_REPORT_STATE 0x01
960/* HEC Functionality State Operand (hec_func_state) */
961#define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED 0
962#define CEC_OP_HEC_FUNC_STATE_INACTIVE 1
963#define CEC_OP_HEC_FUNC_STATE_ACTIVE 2
964#define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD 3
965/* Host Functionality State Operand (host_func_state) */
966#define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED 0
967#define CEC_OP_HOST_FUNC_STATE_INACTIVE 1
968#define CEC_OP_HOST_FUNC_STATE_ACTIVE 2
969/* ENC Functionality State Operand (enc_func_state) */
970#define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED 0
971#define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE 1
972#define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE 2
973/* CDC Error Code Operand (cdc_errcode) */
974#define CEC_OP_CDC_ERROR_CODE_NONE 0
975#define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED 1
976#define CEC_OP_CDC_ERROR_CODE_WRONG_STATE 2
977#define CEC_OP_CDC_ERROR_CODE_OTHER 3
978/* HEC Support Operand (hec_support) */
979#define CEC_OP_HEC_SUPPORT_NO 0
980#define CEC_OP_HEC_SUPPORT_YES 1
981/* HEC Activation Operand (hec_activation) */
982#define CEC_OP_HEC_ACTIVATION_ON 0
983#define CEC_OP_HEC_ACTIVATION_OFF 1
984
985#define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT 0x02
986#define CEC_MSG_CDC_HEC_SET_STATE 0x03
987/* HEC Set State Operand (hec_set_state) */
988#define CEC_OP_HEC_SET_STATE_DEACTIVATE 0
989#define CEC_OP_HEC_SET_STATE_ACTIVATE 1
990
991#define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION 0x04
992#define CEC_MSG_CDC_HEC_NOTIFY_ALIVE 0x05
993#define CEC_MSG_CDC_HEC_DISCOVER 0x06
994/* Hotplug Detect messages */
995#define CEC_MSG_CDC_HPD_SET_STATE 0x10
996/* HPD State Operand (hpd_state) */
997#define CEC_OP_HPD_STATE_CP_EDID_DISABLE 0
998#define CEC_OP_HPD_STATE_CP_EDID_ENABLE 1
999#define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE 2
1000#define CEC_OP_HPD_STATE_EDID_DISABLE 3
1001#define CEC_OP_HPD_STATE_EDID_ENABLE 4
1002#define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE 5
1003#define CEC_MSG_CDC_HPD_REPORT_STATE 0x11
1004/* HPD Error Code Operand (hpd_error) */
1005#define CEC_OP_HPD_ERROR_NONE 0
1006#define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE 1
1007#define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE 2
1008#define CEC_OP_HPD_ERROR_OTHER 3
1009#define CEC_OP_HPD_ERROR_NONE_NO_VIDEO 4
1010
1011#endif