blob: 58b2200ec780abfb09794e023c461d3903bf07ed [file] [log] [blame]
Tony Lindgrenec6bced2005-07-10 19:58:20 +01001/*
Nishanth Menonffe4f0f2011-05-26 19:39:18 -07002 * CPU frequency scaling for OMAP using OPP information
Tony Lindgrenec6bced2005-07-10 19:58:20 +01003 *
4 * Copyright (C) 2005 Nokia Corporation
5 * Written by Tony Lindgren <tony@atomide.com>
6 *
7 * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
8 *
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -07009 * Copyright (C) 2007-2011 Texas Instruments, Inc.
10 * - OMAP3/4 support by Rajendra Nayak, Santosh Shilimkar
11 *
Tony Lindgrenec6bced2005-07-10 19:58:20 +010012 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 */
16#include <linux/types.h>
17#include <linux/kernel.h>
18#include <linux/sched.h>
19#include <linux/cpufreq.h>
20#include <linux/delay.h>
21#include <linux/init.h>
22#include <linux/err.h>
Russell Kingf8ce2542006-01-07 16:15:52 +000023#include <linux/clk.h>
Russell Kingfced80c2008-09-06 12:10:45 +010024#include <linux/io.h>
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -070025#include <linux/opp.h>
Russell King46c12212011-09-21 16:53:00 -070026#include <linux/cpu.h>
Kevin Hilmanc1b547b2011-09-30 10:41:26 -070027#include <linux/module.h>
Nishanth Menon49ded522013-04-09 23:22:01 +000028#include <linux/platform_device.h>
Kevin Hilman53dfe8a2011-07-15 15:05:04 -070029#include <linux/regulator/consumer.h>
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -070030
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -070031#include <asm/smp_plat.h>
Russell King46c12212011-09-21 16:53:00 -070032#include <asm/cpu.h>
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -070033
Afzal Mohammed42daffd2012-02-23 19:19:24 +053034/* OPP tolerance in percentage */
35#define OPP_TOLERANCE 4
36
Kevin Hilmanaeec2992009-01-27 19:13:38 -070037static struct cpufreq_frequency_table *freq_table;
Nishanth Menon1c782172011-05-26 19:39:20 -070038static atomic_t freq_table_users = ATOMIC_INIT(0);
Hiroshi DOYUb8488fb2007-08-30 12:46:39 +030039static struct clk *mpu_clk;
Nishanth Menona820ffa2011-05-25 16:38:47 -070040static struct device *mpu_dev;
Kevin Hilman53dfe8a2011-07-15 15:05:04 -070041static struct regulator *mpu_reg;
Hiroshi DOYUb8488fb2007-08-30 12:46:39 +030042
Manjunath Kondaiah Gb0a330d2010-10-08 10:00:19 -070043static unsigned int omap_getspeed(unsigned int cpu)
Tony Lindgrenec6bced2005-07-10 19:58:20 +010044{
Tony Lindgrenec6bced2005-07-10 19:58:20 +010045 unsigned long rate;
46
Russell King46c12212011-09-21 16:53:00 -070047 if (cpu >= NR_CPUS)
Tony Lindgrenec6bced2005-07-10 19:58:20 +010048 return 0;
49
Tony Lindgrenec6bced2005-07-10 19:58:20 +010050 rate = clk_get_rate(mpu_clk) / 1000;
Tony Lindgrenec6bced2005-07-10 19:58:20 +010051 return rate;
52}
53
54static int omap_target(struct cpufreq_policy *policy,
55 unsigned int target_freq,
56 unsigned int relation)
57{
Nishanth Menonbf2a3592011-05-26 19:39:17 -070058 unsigned int i;
Kevin Hilman53dfe8a2011-07-15 15:05:04 -070059 int r, ret = 0;
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -070060 struct cpufreq_freqs freqs;
Kevin Hilman53dfe8a2011-07-15 15:05:04 -070061 struct opp *opp;
Afzal Mohammed42daffd2012-02-23 19:19:24 +053062 unsigned long freq, volt = 0, volt_old = 0, tol = 0;
Tony Lindgrenec6bced2005-07-10 19:58:20 +010063
Nishanth Menonbf2a3592011-05-26 19:39:17 -070064 if (!freq_table) {
65 dev_err(mpu_dev, "%s: cpu%d: no freq table!\n", __func__,
66 policy->cpu);
67 return -EINVAL;
68 }
69
70 ret = cpufreq_frequency_table_target(policy, freq_table, target_freq,
71 relation, &i);
72 if (ret) {
73 dev_dbg(mpu_dev, "%s: cpu%d: no freq match for %d(ret=%d)\n",
74 __func__, policy->cpu, target_freq, ret);
75 return ret;
76 }
77 freqs.new = freq_table[i].frequency;
78 if (!freqs.new) {
79 dev_err(mpu_dev, "%s: cpu%d: no match for freq %d\n", __func__,
80 policy->cpu, target_freq);
81 return -EINVAL;
82 }
Kevin Hilmanaeec2992009-01-27 19:13:38 -070083
Russell King46c12212011-09-21 16:53:00 -070084 freqs.old = omap_getspeed(policy->cpu);
Tony Lindgrenec6bced2005-07-10 19:58:20 +010085
Colin Cross022ac032011-06-06 21:05:29 -050086 if (freqs.old == freqs.new && policy->cur == freqs.new)
Kevin Hilmanaeec2992009-01-27 19:13:38 -070087 return ret;
88
Kevin Hilman53dfe8a2011-07-15 15:05:04 -070089 freq = freqs.new * 1000;
Kevin Hilman8df0a662012-10-02 15:39:03 -070090 ret = clk_round_rate(mpu_clk, freq);
91 if (IS_ERR_VALUE(ret)) {
92 dev_warn(mpu_dev,
93 "CPUfreq: Cannot find matching frequency for %lu\n",
94 freq);
95 return ret;
96 }
97 freq = ret;
Kevin Hilman53dfe8a2011-07-15 15:05:04 -070098
99 if (mpu_reg) {
Nishanth Menonf44d1882013-01-18 19:52:32 +0000100 rcu_read_lock();
Kevin Hilman53dfe8a2011-07-15 15:05:04 -0700101 opp = opp_find_freq_ceil(mpu_dev, &freq);
102 if (IS_ERR(opp)) {
Nishanth Menonf44d1882013-01-18 19:52:32 +0000103 rcu_read_unlock();
Kevin Hilman53dfe8a2011-07-15 15:05:04 -0700104 dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
105 __func__, freqs.new);
106 return -EINVAL;
107 }
108 volt = opp_get_voltage(opp);
Nishanth Menonf44d1882013-01-18 19:52:32 +0000109 rcu_read_unlock();
Afzal Mohammed42daffd2012-02-23 19:19:24 +0530110 tol = volt * OPP_TOLERANCE / 100;
Kevin Hilman53dfe8a2011-07-15 15:05:04 -0700111 volt_old = regulator_get_voltage(mpu_reg);
112 }
113
114 dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n",
115 freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
116 freqs.new / 1000, volt ? volt / 1000 : -1);
117
Viresh Kumar44a49a22013-06-19 11:18:20 +0530118 /* notifiers */
119 cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
120
Kevin Hilman53dfe8a2011-07-15 15:05:04 -0700121 /* scaling up? scale voltage before frequency */
122 if (mpu_reg && (freqs.new > freqs.old)) {
Afzal Mohammed42daffd2012-02-23 19:19:24 +0530123 r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
Kevin Hilman53dfe8a2011-07-15 15:05:04 -0700124 if (r < 0) {
125 dev_warn(mpu_dev, "%s: unable to scale voltage up.\n",
126 __func__);
127 freqs.new = freqs.old;
128 goto done;
129 }
130 }
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -0700131
Kevin Hilmanaeec2992009-01-27 19:13:38 -0700132 ret = clk_set_rate(mpu_clk, freqs.new * 1000);
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -0700133
Kevin Hilman53dfe8a2011-07-15 15:05:04 -0700134 /* scaling down? scale voltage after frequency */
135 if (mpu_reg && (freqs.new < freqs.old)) {
Afzal Mohammed42daffd2012-02-23 19:19:24 +0530136 r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
Kevin Hilman53dfe8a2011-07-15 15:05:04 -0700137 if (r < 0) {
138 dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
139 __func__);
140 ret = clk_set_rate(mpu_clk, freqs.old * 1000);
141 freqs.new = freqs.old;
142 goto done;
143 }
144 }
145
146 freqs.new = omap_getspeed(policy->cpu);
Russell King46c12212011-09-21 16:53:00 -0700147
Kevin Hilman53dfe8a2011-07-15 15:05:04 -0700148done:
Russell King46c12212011-09-21 16:53:00 -0700149 /* notifiers */
Viresh Kumarb43a7ff2013-03-24 11:56:43 +0530150 cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100151
152 return ret;
153}
154
Nishanth Menon1c782172011-05-26 19:39:20 -0700155static inline void freq_table_free(void)
156{
157 if (atomic_dec_and_test(&freq_table_users))
158 opp_free_cpufreq_table(mpu_dev, &freq_table);
159}
160
Paul Gortmaker27609842013-06-19 13:54:04 -0400161static int omap_cpu_init(struct cpufreq_policy *policy)
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100162{
Viresh Kumar982bce12013-10-03 20:29:18 +0530163 int result;
Kevin Hilmanaeec2992009-01-27 19:13:38 -0700164
Paul Walmsleye2ee1b42012-09-07 18:16:35 +0000165 mpu_clk = clk_get(NULL, "cpufreq_ck");
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100166 if (IS_ERR(mpu_clk))
167 return PTR_ERR(mpu_clk);
168
Viresh Kumar982bce12013-10-03 20:29:18 +0530169 if (!freq_table) {
Nishanth Menon1c782172011-05-26 19:39:20 -0700170 result = opp_init_cpufreq_table(mpu_dev, &freq_table);
Viresh Kumar982bce12013-10-03 20:29:18 +0530171 if (result) {
172 dev_err(mpu_dev,
173 "%s: cpu%d: failed creating freq table[%d]\n",
Nishanth Menonbf2a3592011-05-26 19:39:17 -0700174 __func__, policy->cpu, result);
Viresh Kumar982bce12013-10-03 20:29:18 +0530175 goto fail;
176 }
Kevin Hilmanaeec2992009-01-27 19:13:38 -0700177 }
178
Rajendra Nayak1b865212012-08-09 12:38:21 +0530179 atomic_inc_return(&freq_table_users);
180
Kevin Hilmanaeec2992009-01-27 19:13:38 -0700181 /* FIXME: what's the actual transition time? */
Viresh Kumar982bce12013-10-03 20:29:18 +0530182 result = cpufreq_generic_init(policy, freq_table, 300 * 1000);
183 if (!result)
184 return 0;
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100185
Nishanth Menon1c782172011-05-26 19:39:20 -0700186 freq_table_free();
Viresh Kumar982bce12013-10-03 20:29:18 +0530187fail:
Nishanth Menon11e04fd2011-05-26 19:39:19 -0700188 clk_put(mpu_clk);
189 return result;
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100190}
191
Hiroshi DOYUb8488fb2007-08-30 12:46:39 +0300192static int omap_cpu_exit(struct cpufreq_policy *policy)
193{
Viresh Kumar42a4df02013-09-16 18:56:46 +0530194 cpufreq_frequency_table_put_attr(policy->cpu);
Nishanth Menon1c782172011-05-26 19:39:20 -0700195 freq_table_free();
Hiroshi DOYUb8488fb2007-08-30 12:46:39 +0300196 clk_put(mpu_clk);
197 return 0;
198}
199
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100200static struct cpufreq_driver omap_driver = {
201 .flags = CPUFREQ_STICKY,
Viresh Kumard5ca1642013-10-03 20:28:13 +0530202 .verify = cpufreq_generic_frequency_table_verify,
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100203 .target = omap_target,
204 .get = omap_getspeed,
205 .init = omap_cpu_init,
Hiroshi DOYUb8488fb2007-08-30 12:46:39 +0300206 .exit = omap_cpu_exit,
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100207 .name = "omap",
Viresh Kumard5ca1642013-10-03 20:28:13 +0530208 .attr = cpufreq_generic_attr,
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100209};
210
Nishanth Menon49ded522013-04-09 23:22:01 +0000211static int omap_cpufreq_probe(struct platform_device *pdev)
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100212{
Kevin Hilman747a7f62012-09-06 14:22:44 -0700213 mpu_dev = get_cpu_device(0);
214 if (!mpu_dev) {
Nishanth Menona820ffa2011-05-25 16:38:47 -0700215 pr_warning("%s: unable to get the mpu device\n", __func__);
Kevin Hilman747a7f62012-09-06 14:22:44 -0700216 return -EINVAL;
Nishanth Menona820ffa2011-05-25 16:38:47 -0700217 }
218
Kevin Hilman53dfe8a2011-07-15 15:05:04 -0700219 mpu_reg = regulator_get(mpu_dev, "vcc");
220 if (IS_ERR(mpu_reg)) {
221 pr_warning("%s: unable to get MPU regulator\n", __func__);
222 mpu_reg = NULL;
223 } else {
224 /*
225 * Ensure physical regulator is present.
226 * (e.g. could be dummy regulator.)
227 */
228 if (regulator_get_voltage(mpu_reg) < 0) {
229 pr_warn("%s: physical regulator not present for MPU\n",
230 __func__);
231 regulator_put(mpu_reg);
232 mpu_reg = NULL;
233 }
234 }
235
Tony Lindgrenec6bced2005-07-10 19:58:20 +0100236 return cpufreq_register_driver(&omap_driver);
237}
238
Nishanth Menon49ded522013-04-09 23:22:01 +0000239static int omap_cpufreq_remove(struct platform_device *pdev)
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -0700240{
Nishanth Menon49ded522013-04-09 23:22:01 +0000241 return cpufreq_unregister_driver(&omap_driver);
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -0700242}
Kevin Hilmanaeec2992009-01-27 19:13:38 -0700243
Nishanth Menon49ded522013-04-09 23:22:01 +0000244static struct platform_driver omap_cpufreq_platdrv = {
245 .driver = {
246 .name = "omap-cpufreq",
247 .owner = THIS_MODULE,
248 },
249 .probe = omap_cpufreq_probe,
250 .remove = omap_cpufreq_remove,
251};
252module_platform_driver(omap_cpufreq_platdrv);
253
Santosh Shilimkar731e0cc2010-08-11 17:02:43 -0700254MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs");
255MODULE_LICENSE("GPL");