drivers/net/can/dev.c

/*
 * Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
 * Copyright (C) 2006 Andrey Volkov, Varma Electronics
 * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the version 2 of the GNU General Public License
 * as published by the Free Software Foundation
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see <http://www.gnu.org/licenses/>.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/can.h>
#include <linux/can/dev.h>
#include <linux/can/skb.h>
#include <linux/can/netlink.h>
#include <linux/can/led.h>
#include <net/rtnetlink.h>

#define MOD_DESC "CAN device driver interface"

MODULE_DESCRIPTION(MOD_DESC);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");

/* CAN DLC to real data length conversion helpers */

static const u8 dlc2len[] = {0, 1, 2, 3, 4, 5, 6, 7,
			     8, 12, 16, 20, 24, 32, 48, 64};

/* get data length from can_dlc with sanitized can_dlc */
u8 can_dlc2len(u8 can_dlc)
{
	return dlc2len[can_dlc & 0x0F];
}
EXPORT_SYMBOL_GPL(can_dlc2len);

static const u8 len2dlc[] = {0, 1, 2, 3, 4, 5, 6, 7, 8,		/* 0 - 8 */
			     9, 9, 9, 9,			/* 9 - 12 */
			     10, 10, 10, 10,			/* 13 - 16 */
			     11, 11, 11, 11,			/* 17 - 20 */
			     12, 12, 12, 12,			/* 21 - 24 */
			     13, 13, 13, 13, 13, 13, 13, 13,	/* 25 - 32 */
			     14, 14, 14, 14, 14, 14, 14, 14,	/* 33 - 40 */
			     14, 14, 14, 14, 14, 14, 14, 14,	/* 41 - 48 */
			     15, 15, 15, 15, 15, 15, 15, 15,	/* 49 - 56 */
			     15, 15, 15, 15, 15, 15, 15, 15};	/* 57 - 64 */

/* map the sanitized data length to an appropriate data length code */
u8 can_len2dlc(u8 len)
{
	if (unlikely(len > 64))
		return 0xF;

	return len2dlc[len];
}
EXPORT_SYMBOL_GPL(can_len2dlc);

#ifdef CONFIG_CAN_CALC_BITTIMING
#define CAN_CALC_MAX_ERROR 50 /* in one-tenth of a percent */

/*
 * Bit-timing calculation derived from:
 *
 * Code based on LinCAN sources and H8S2638 project
 * Copyright 2004-2006 Pavel Pisa - DCE FELK CVUT cz
 * Copyright 2005      Stanislav Marek
 * email: pisa@cmp.felk.cvut.cz
 *
 * Calculates proper bit-timing parameters for a specified bit-rate
 * and sample-point, which can then be used to set the bit-timing
 * registers of the CAN controller. You can find more information
 * in the header file linux/can/netlink.h.
 */
static int can_update_spt(const struct can_bittiming_const *btc,
			  int sampl_pt, int tseg, int *tseg1, int *tseg2)
{
	*tseg2 = tseg + 1 - (sampl_pt * (tseg + 1)) / 1000;
	if (*tseg2 < btc->tseg2_min)
		*tseg2 = btc->tseg2_min;
	if (*tseg2 > btc->tseg2_max)
		*tseg2 = btc->tseg2_max;
	*tseg1 = tseg - *tseg2;
	if (*tseg1 > btc->tseg1_max) {
		*tseg1 = btc->tseg1_max;
		*tseg2 = tseg - *tseg1;
	}
	return 1000 * (tseg + 1 - *tseg2) / (tseg + 1);
}

static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
			      const struct can_bittiming_const *btc)
{
	struct can_priv *priv = netdev_priv(dev);
	long rate, best_rate = 0;
	long best_error = 1000000000, error = 0;
	int best_tseg = 0, best_brp = 0, brp = 0;
	int tsegall, tseg = 0, tseg1 = 0, tseg2 = 0;
	int spt_error = 1000, spt = 0, sampl_pt;
	u64 v64;

	/* Use CIA recommended sample points */
	if (bt->sample_point) {
		sampl_pt = bt->sample_point;
	} else {
		if (bt->bitrate > 800000)
			sampl_pt = 750;
		else if (bt->bitrate > 500000)
			sampl_pt = 800;
		else
			sampl_pt = 875;
	}

	/* tseg even = round down, odd = round up */
	for (tseg = (btc->tseg1_max + btc->tseg2_max) * 2 + 1;
	     tseg >= (btc->tseg1_min + btc->tseg2_min) * 2; tseg--) {
		tsegall = 1 + tseg / 2;
		/* Compute all possible tseg choices (tseg=tseg1+tseg2) */
		brp = priv->clock.freq / (tsegall * bt->bitrate) + tseg % 2;
		/* chose brp step which is possible in system */
		brp = (brp / btc->brp_inc) * btc->brp_inc;
		if ((brp < btc->brp_min) || (brp > btc->brp_max))
			continue;
		rate = priv->clock.freq / (brp * tsegall);
		error = bt->bitrate - rate;
		/* tseg brp biterror */
		if (error < 0)
			error = -error;
		if (error > best_error)
			continue;
		best_error = error;
		if (error == 0) {
			spt = can_update_spt(btc, sampl_pt, tseg / 2,
					     &tseg1, &tseg2);
			error = sampl_pt - spt;
			if (error < 0)
				error = -error;
			if (error > spt_error)
				continue;
			spt_error = error;
		}
		best_tseg = tseg / 2;
		best_brp = brp;
		best_rate = rate;
		if (error == 0)
			break;
	}

	if (best_error) {
		/* Error in one-tenth of a percent */
		error = (best_error * 1000) / bt->bitrate;
		if (error > CAN_CALC_MAX_ERROR) {
			netdev_err(dev,
				   "bitrate error %ld.%ld%% too high\n",
				   error / 10, error % 10);
			return -EDOM;
		} else {
			netdev_warn(dev, "bitrate error %ld.%ld%%\n",
				    error / 10, error % 10);
		}
	}

	/* real sample point */
	bt->sample_point = can_update_spt(btc, sampl_pt, best_tseg,
					  &tseg1, &tseg2);

	v64 = (u64)best_brp * 1000000000UL;
	do_div(v64, priv->clock.freq);
	bt->tq = (u32)v64;
	bt->prop_seg = tseg1 / 2;
	bt->phase_seg1 = tseg1 - bt->prop_seg;
	bt->phase_seg2 = tseg2;

	/* check for sjw user settings */
	if (!bt->sjw || !btc->sjw_max)
		bt->sjw = 1;
	else {
		/* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */
		if (bt->sjw > btc->sjw_max)
			bt->sjw = btc->sjw_max;
		/* bt->sjw must not be higher than tseg2 */
		if (tseg2 < bt->sjw)
			bt->sjw = tseg2;
	}

	bt->brp = best_brp;
	/* real bit-rate */
	bt->bitrate = priv->clock.freq / (bt->brp * (tseg1 + tseg2 + 1));

	return 0;
}
#else /* !CONFIG_CAN_CALC_BITTIMING */
static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
			      const struct can_bittiming_const *btc)
{
	netdev_err(dev, "bit-timing calculation not available\n");
	return -EINVAL;
}
#endif /* CONFIG_CAN_CALC_BITTIMING */

/*
 * Checks the validity of the specified bit-timing parameters prop_seg,
 * phase_seg1, phase_seg2 and sjw and tries to determine the bitrate
 * prescaler value brp. You can find more information in the header
 * file linux/can/netlink.h.
 */
static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt,
			       const struct can_bittiming_const *btc)
{
	struct can_priv *priv = netdev_priv(dev);
	int tseg1, alltseg;
	u64 brp64;

	tseg1 = bt->prop_seg + bt->phase_seg1;
	if (!bt->sjw)
		bt->sjw = 1;
	if (bt->sjw > btc->sjw_max ||
	    tseg1 < btc->tseg1_min || tseg1 > btc->tseg1_max ||
	    bt->phase_seg2 < btc->tseg2_min || bt->phase_seg2 > btc->tseg2_max)
		return -ERANGE;

	brp64 = (u64)priv->clock.freq * (u64)bt->tq;
	if (btc->brp_inc > 1)
		do_div(brp64, btc->brp_inc);
	brp64 += 500000000UL - 1;
	do_div(brp64, 1000000000UL); /* the practicable BRP */
	if (btc->brp_inc > 1)
		brp64 *= btc->brp_inc;
	bt->brp = (u32)brp64;

	if (bt->brp < btc->brp_min || bt->brp > btc->brp_max)
		return -EINVAL;

	alltseg = bt->prop_seg + bt->phase_seg1 + bt->phase_seg2 + 1;
	bt->bitrate = priv->clock.freq / (bt->brp * alltseg);
	bt->sample_point = ((tseg1 + 1) * 1000) / alltseg;

	return 0;
}

static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt,
			     const struct can_bittiming_const *btc)
{
	int err;

	/* Check if the CAN device has bit-timing parameters */
	if (!btc)
		return -ENOTSUPP;

	/*
	 * Depending on the given can_bittiming parameter structure the CAN
	 * timing parameters are calculated based on the provided bitrate OR
	 * alternatively the CAN timing parameters (tq, prop_seg, etc.) are
	 * provided directly which are then checked and fixed up.
	 */
	if (!bt->tq && bt->bitrate)
		err = can_calc_bittiming(dev, bt, btc);
	else if (bt->tq && !bt->bitrate)
		err = can_fixup_bittiming(dev, bt, btc);
	else
		err = -EINVAL;

	return err;
}

/*
 * Local echo of CAN messages
 *
 * CAN network devices *should* support a local echo functionality
 * (see Documentation/networking/can.txt). To test the handling of CAN
 * interfaces that do not support the local echo both driver types are
 * implemented. In the case that the driver does not support the echo
 * the IFF_ECHO remains clear in dev->flags. This causes the PF_CAN core
 * to perform the echo as a fallback solution.
 */
static void can_flush_echo_skb(struct net_device *dev)
{
	struct can_priv *priv = netdev_priv(dev);
	struct net_device_stats *stats = &dev->stats;
	int i;

	for (i = 0; i < priv->echo_skb_max; i++) {
		if (priv->echo_skb[i]) {
			kfree_skb(priv->echo_skb[i]);
			priv->echo_skb[i] = NULL;
			stats->tx_dropped++;
			stats->tx_aborted_errors++;
		}
	}
}

/*
 * Put the skb on the stack to be looped backed locally lateron
 *
 * The function is typically called in the start_xmit function
 * of the device driver. The driver must protect access to
 * priv->echo_skb, if necessary.
 */
void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
		      unsigned int idx)
{
	struct can_priv *priv = netdev_priv(dev);

	BUG_ON(idx >= priv->echo_skb_max);

	/* check flag whether this packet has to be looped back */
	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK ||
	    (skb->protocol != htons(ETH_P_CAN) &&
	     skb->protocol != htons(ETH_P_CANFD))) {
		kfree_skb(skb);
		return;
	}

	if (!priv->echo_skb[idx]) {

		skb = can_create_echo_skb(skb);
		if (!skb)
			return;

		/* make settings for echo to reduce code in irq context */
		skb->pkt_type = PACKET_BROADCAST;
		skb->ip_summed = CHECKSUM_UNNECESSARY;
		skb->dev = dev;

		/* save this skb for tx interrupt echo handling */
		priv->echo_skb[idx] = skb;
	} else {
		/* locking problem with netif_stop_queue() ?? */
		netdev_err(dev, "%s: BUG! echo_skb is occupied!\n", __func__);
		kfree_skb(skb);
	}
}
EXPORT_SYMBOL_GPL(can_put_echo_skb);

/*
 * Get the skb from the stack and loop it back locally
 *
 * The function is typically called when the TX done interrupt
 * is handled in the device driver. The driver must protect
 * access to priv->echo_skb, if necessary.
 */
unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx)
{
	struct can_priv *priv = netdev_priv(dev);

	BUG_ON(idx >= priv->echo_skb_max);

	if (priv->echo_skb[idx]) {
		struct sk_buff *skb = priv->echo_skb[idx];
		struct can_frame *cf = (struct can_frame *)skb->data;
		u8 dlc = cf->can_dlc;

		netif_rx(priv->echo_skb[idx]);
		priv->echo_skb[idx] = NULL;

		return dlc;
	}

	return 0;
}
EXPORT_SYMBOL_GPL(can_get_echo_skb);

/*
  * Remove the skb from the stack and free it.
  *
  * The function is typically called when TX failed.
  */
void can_free_echo_skb(struct net_device *dev, unsigned int idx)
{
	struct can_priv *priv = netdev_priv(dev);

	BUG_ON(idx >= priv->echo_skb_max);

	if (priv->echo_skb[idx]) {
		kfree_skb(priv->echo_skb[idx]);
		priv->echo_skb[idx] = NULL;
	}
}
EXPORT_SYMBOL_GPL(can_free_echo_skb);

/*
 * CAN device restart for bus-off recovery
 */
static void can_restart(unsigned long data)
{
	struct net_device *dev = (struct net_device *)data;
	struct can_priv *priv = netdev_priv(dev);
	struct net_device_stats *stats = &dev->stats;
	struct sk_buff *skb;
	struct can_frame *cf;
	int err;

	BUG_ON(netif_carrier_ok(dev));

	/*
	 * No synchronization needed because the device is bus-off and
	 * no messages can come in or go out.
	 */
	can_flush_echo_skb(dev);

	/* send restart message upstream */
	skb = alloc_can_err_skb(dev, &cf);
	if (skb == NULL) {
		err = -ENOMEM;
		goto restart;
	}
	cf->can_id |= CAN_ERR_RESTARTED;

	netif_rx(skb);

	stats->rx_packets++;
	stats->rx_bytes += cf->can_dlc;

restart:
	netdev_dbg(dev, "restarted\n");
	priv->can_stats.restarts++;

	/* Now restart the device */
	err = priv->do_set_mode(dev, CAN_MODE_START);

	netif_carrier_on(dev);
	if (err)
		netdev_err(dev, "Error %d during restart", err);
}

int can_restart_now(struct net_device *dev)
{
	struct can_priv *priv = netdev_priv(dev);

	/*
	 * A manual restart is only permitted if automatic restart is
	 * disabled and the device is in the bus-off state
	 */
	if (priv->restart_ms)
		return -EINVAL;
	if (priv->state != CAN_STATE_BUS_OFF)
		return -EBUSY;

	/* Runs as soon as possible in the timer context */
	mod_timer(&priv->restart_timer, jiffies);

	return 0;
}

/*
 * CAN bus-off
 *
 * This functions should be called when the device goes bus-off to
 * tell the netif layer that no more packets can be sent or received.
 * If enabled, a timer is started to trigger bus-off recovery.
 */
void can_bus_off(struct net_device *dev)
{
	struct can_priv *priv = netdev_priv(dev);

	netdev_dbg(dev, "bus-off\n");

	netif_carrier_off(dev);
	priv->can_stats.bus_off++;

	if (priv->restart_ms)
		mod_timer(&priv->restart_timer,
			  jiffies + (priv->restart_ms * HZ) / 1000);
}
EXPORT_SYMBOL_GPL(can_bus_off);

static void can_setup(struct net_device *dev)
{
	dev->type = ARPHRD_CAN;
	dev->mtu = CAN_MTU;
	dev->hard_header_len = 0;
	dev->addr_len = 0;
	dev->tx_queue_len = 10;

	/* New-style flags. */
	dev->flags = IFF_NOARP;
	dev->features = NETIF_F_HW_CSUM;
}

struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
{
	struct sk_buff *skb;

	skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) +
			       sizeof(struct can_frame));
	if (unlikely(!skb))
		return NULL;

	skb->protocol = htons(ETH_P_CAN);
	skb->pkt_type = PACKET_BROADCAST;
	skb->ip_summed = CHECKSUM_UNNECESSARY;

	can_skb_reserve(skb);
	can_skb_prv(skb)->ifindex = dev->ifindex;

	*cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
	memset(*cf, 0, sizeof(struct can_frame));

	return skb;
}
EXPORT_SYMBOL_GPL(alloc_can_skb);

struct sk_buff *alloc_canfd_skb(struct net_device *dev,
				struct canfd_frame **cfd)
{
	struct sk_buff *skb;

	skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) +
			       sizeof(struct canfd_frame));
	if (unlikely(!skb))
		return NULL;

	skb->protocol = htons(ETH_P_CANFD);
	skb->pkt_type = PACKET_BROADCAST;
	skb->ip_summed = CHECKSUM_UNNECESSARY;

	can_skb_reserve(skb);
	can_skb_prv(skb)->ifindex = dev->ifindex;

	*cfd = (struct canfd_frame *)skb_put(skb, sizeof(struct canfd_frame));
	memset(*cfd, 0, sizeof(struct canfd_frame));

	return skb;
}
EXPORT_SYMBOL_GPL(alloc_canfd_skb);

struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
{
	struct sk_buff *skb;

	skb = alloc_can_skb(dev, cf);
	if (unlikely(!skb))
		return NULL;

	(*cf)->can_id = CAN_ERR_FLAG;
	(*cf)->can_dlc = CAN_ERR_DLC;

	return skb;
}
EXPORT_SYMBOL_GPL(alloc_can_err_skb);

/*
 * Allocate and setup space for the CAN network device
 */
struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max)
{
	struct net_device *dev;
	struct can_priv *priv;
	int size;

	if (echo_skb_max)
		size = ALIGN(sizeof_priv, sizeof(struct sk_buff *)) +
			echo_skb_max * sizeof(struct sk_buff *);
	else
		size = sizeof_priv;

	dev = alloc_netdev(size, "can%d", can_setup);
	if (!dev)
		return NULL;

	priv = netdev_priv(dev);

	if (echo_skb_max) {
		priv->echo_skb_max = echo_skb_max;
		priv->echo_skb = (void *)priv +
			ALIGN(sizeof_priv, sizeof(struct sk_buff *));
	}

	priv->state = CAN_STATE_STOPPED;

	init_timer(&priv->restart_timer);

	return dev;
}
EXPORT_SYMBOL_GPL(alloc_candev);

/*
 * Free space of the CAN network device
 */
void free_candev(struct net_device *dev)
{
	free_netdev(dev);
}
EXPORT_SYMBOL_GPL(free_candev);

/*
 * Common open function when the device gets opened.
 *
 * This function should be called in the open function of the device
 * driver.
 */
int open_candev(struct net_device *dev)
{
	struct can_priv *priv = netdev_priv(dev);

	if (!priv->bittiming.bitrate) {
		netdev_err(dev, "bit-timing not yet defined\n");
		return -EINVAL;
	}

	/* Switch carrier on if device was stopped while in bus-off state */
	if (!netif_carrier_ok(dev))
		netif_carrier_on(dev);

	setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev);

	return 0;
}
EXPORT_SYMBOL_GPL(open_candev);

/*
 * Common close function for cleanup before the device gets closed.
 *
 * This function should be called in the close function of the device
 * driver.
 */
void close_candev(struct net_device *dev)
{
	struct can_priv *priv = netdev_priv(dev);

	del_timer_sync(&priv->restart_timer);
	can_flush_echo_skb(dev);
}
EXPORT_SYMBOL_GPL(close_candev);

/*
 * CAN netlink interface
 */
static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
	[IFLA_CAN_STATE]	= { .type = NLA_U32 },
	[IFLA_CAN_CTRLMODE]	= { .len = sizeof(struct can_ctrlmode) },
	[IFLA_CAN_RESTART_MS]	= { .type = NLA_U32 },
	[IFLA_CAN_RESTART]	= { .type = NLA_U32 },
	[IFLA_CAN_BITTIMING]	= { .len = sizeof(struct can_bittiming) },
	[IFLA_CAN_BITTIMING_CONST]
				= { .len = sizeof(struct can_bittiming_const) },
	[IFLA_CAN_CLOCK]	= { .len = sizeof(struct can_clock) },
	[IFLA_CAN_BERR_COUNTER]	= { .len = sizeof(struct can_berr_counter) },
	[IFLA_CAN_DATA_BITTIMING]
				= { .len = sizeof(struct can_bittiming) },
	[IFLA_CAN_DATA_BITTIMING_CONST]
				= { .len = sizeof(struct can_bittiming_const) },
};

static int can_changelink(struct net_device *dev,
			  struct nlattr *tb[], struct nlattr *data[])
{
	struct can_priv *priv = netdev_priv(dev);
	int err;

	/* We need synchronization with dev->stop() */
	ASSERT_RTNL();

	if (data[IFLA_CAN_BITTIMING]) {
		struct can_bittiming bt;

		/* Do not allow changing bittiming while running */
		if (dev->flags & IFF_UP)
			return -EBUSY;
		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
		err = can_get_bittiming(dev, &bt, priv->bittiming_const);
		if (err)
			return err;
		memcpy(&priv->bittiming, &bt, sizeof(bt));

		if (priv->do_set_bittiming) {
			/* Finally, set the bit-timing registers */
			err = priv->do_set_bittiming(dev);
			if (err)
				return err;
		}
	}

	if (data[IFLA_CAN_CTRLMODE]) {
		struct can_ctrlmode *cm;

		/* Do not allow changing controller mode while running */
		if (dev->flags & IFF_UP)
			return -EBUSY;
		cm = nla_data(data[IFLA_CAN_CTRLMODE]);
		if (cm->flags & ~priv->ctrlmode_supported)
			return -EOPNOTSUPP;
		priv->ctrlmode &= ~cm->mask;
		priv->ctrlmode |= cm->flags;
	}

	if (data[IFLA_CAN_RESTART_MS]) {
		/* Do not allow changing restart delay while running */
		if (dev->flags & IFF_UP)
			return -EBUSY;
		priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
	}

	if (data[IFLA_CAN_RESTART]) {
		/* Do not allow a restart while not running */
		if (!(dev->flags & IFF_UP))
			return -EINVAL;
		err = can_restart_now(dev);
		if (err)
			return err;
	}

	if (data[IFLA_CAN_DATA_BITTIMING]) {
		struct can_bittiming dbt;

		/* Do not allow changing bittiming while running */
		if (dev->flags & IFF_UP)
			return -EBUSY;
		memcpy(&dbt, nla_data(data[IFLA_CAN_DATA_BITTIMING]),
		       sizeof(dbt));
		err = can_get_bittiming(dev, &dbt, priv->data_bittiming_const);
		if (err)
			return err;
		memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));

		if (priv->do_set_data_bittiming) {
			/* Finally, set the bit-timing registers */
			err = priv->do_set_data_bittiming(dev);
			if (err)
				return err;
		}
	}

	return 0;
}

static size_t can_get_size(const struct net_device *dev)
{
	struct can_priv *priv = netdev_priv(dev);
	size_t size = 0;

	if (priv->bittiming.bitrate)				/* IFLA_CAN_BITTIMING */
		size += nla_total_size(sizeof(struct can_bittiming));
	if (priv->bittiming_const)				/* IFLA_CAN_BITTIMING_CONST */
		size += nla_total_size(sizeof(struct can_bittiming_const));
	size += nla_total_size(sizeof(struct can_clock));	/* IFLA_CAN_CLOCK */
	size += nla_total_size(sizeof(u32));			/* IFLA_CAN_STATE */
	size += nla_total_size(sizeof(struct can_ctrlmode));	/* IFLA_CAN_CTRLMODE */
	size += nla_total_size(sizeof(u32));			/* IFLA_CAN_RESTART_MS */
	if (priv->do_get_berr_counter)				/* IFLA_CAN_BERR_COUNTER */
		size += nla_total_size(sizeof(struct can_berr_counter));
	if (priv->data_bittiming.bitrate)			/* IFLA_CAN_DATA_BITTIMING */
		size += nla_total_size(sizeof(struct can_bittiming));
	if (priv->data_bittiming_const)				/* IFLA_CAN_DATA_BITTIMING_CONST */
		size += nla_total_size(sizeof(struct can_bittiming_const));

	return size;
}

static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
{
	struct can_priv *priv = netdev_priv(dev);
	struct can_ctrlmode cm = {.flags = priv->ctrlmode};
	struct can_berr_counter bec;
	enum can_state state = priv->state;

	if (priv->do_get_state)
		priv->do_get_state(dev, &state);

	if ((priv->bittiming.bitrate &&
	     nla_put(skb, IFLA_CAN_BITTIMING,
		     sizeof(priv->bittiming), &priv->bittiming)) ||

	    (priv->bittiming_const &&
	     nla_put(skb, IFLA_CAN_BITTIMING_CONST,
		     sizeof(*priv->bittiming_const), priv->bittiming_const)) ||

	    nla_put(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock) ||
	    nla_put_u32(skb, IFLA_CAN_STATE, state) ||
	    nla_put(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm) ||
	    nla_put_u32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms) ||

	    (priv->do_get_berr_counter &&
	     !priv->do_get_berr_counter(dev, &bec) &&
	     nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec)) ||

	    (priv->data_bittiming.bitrate &&
	     nla_put(skb, IFLA_CAN_DATA_BITTIMING,
		     sizeof(priv->data_bittiming), &priv->data_bittiming)) ||

	    (priv->data_bittiming_const &&
	     nla_put(skb, IFLA_CAN_DATA_BITTIMING_CONST,
		     sizeof(*priv->data_bittiming_const),
		     priv->data_bittiming_const)))
		return -EMSGSIZE;

	return 0;
}

static size_t can_get_xstats_size(const struct net_device *dev)
{
	return sizeof(struct can_device_stats);
}

static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
{
	struct can_priv *priv = netdev_priv(dev);

	if (nla_put(skb, IFLA_INFO_XSTATS,
		    sizeof(priv->can_stats), &priv->can_stats))
		goto nla_put_failure;
	return 0;

nla_put_failure:
	return -EMSGSIZE;
}

static int can_newlink(struct net *src_net, struct net_device *dev,
		       struct nlattr *tb[], struct nlattr *data[])
{
	return -EOPNOTSUPP;
}

static struct rtnl_link_ops can_link_ops __read_mostly = {
	.kind		= "can",
	.maxtype	= IFLA_CAN_MAX,
	.policy		= can_policy,
	.setup		= can_setup,
	.newlink	= can_newlink,
	.changelink	= can_changelink,
	.get_size	= can_get_size,
	.fill_info	= can_fill_info,
	.get_xstats_size = can_get_xstats_size,
	.fill_xstats	= can_fill_xstats,
};

/*
 * Register the CAN network device
 */
int register_candev(struct net_device *dev)
{
	dev->rtnl_link_ops = &can_link_ops;
	return register_netdev(dev);
}
EXPORT_SYMBOL_GPL(register_candev);

/*
 * Unregister the CAN network device
 */
void unregister_candev(struct net_device *dev)
{
	unregister_netdev(dev);
}
EXPORT_SYMBOL_GPL(unregister_candev);

/*
 * Test if a network device is a candev based device
 * and return the can_priv* if so.
 */
struct can_priv *safe_candev_priv(struct net_device *dev)
{
	if ((dev->type != ARPHRD_CAN) || (dev->rtnl_link_ops != &can_link_ops))
		return NULL;

	return netdev_priv(dev);
}
EXPORT_SYMBOL_GPL(safe_candev_priv);

static __init int can_dev_init(void)
{
	int err;

	can_led_notifier_init();

	err = rtnl_link_register(&can_link_ops);
	if (!err)
		printk(KERN_INFO MOD_DESC "\n");

	return err;
}
module_init(can_dev_init);

static __exit void can_dev_exit(void)
{
	rtnl_link_unregister(&can_link_ops);

	can_led_notifier_exit();
}
module_exit(can_dev_exit);

MODULE_ALIAS_RTNL_LINK("can");