Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2003-2015 Broadcom Corporation |
| 3 | * All Rights Reserved |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License version 2 as |
| 7 | * published by the Free Software Foundation. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | * GNU General Public License for more details. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/gpio.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/of_device.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/irq.h> |
| 20 | #include <linux/interrupt.h> |
Kamlakant Patel | 83ea24f | 2015-10-15 18:23:32 +0530 | [diff] [blame] | 21 | #include <linux/irqchip/chained_irq.h> |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 22 | |
| 23 | /* |
| 24 | * XLP GPIO has multiple 32 bit registers for each feature where each register |
| 25 | * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96 |
| 26 | * require 3 32-bit registers for each feature. |
| 27 | * Here we only define offset of the first register for each feature. Offset of |
| 28 | * the registers for pins greater than 32 can be calculated as following(Use |
| 29 | * GPIO_INT_STAT as example): |
| 30 | * |
| 31 | * offset = (gpio / XLP_GPIO_REGSZ) * 4; |
| 32 | * reg_addr = addr + offset; |
| 33 | * |
| 34 | * where addr is base address of the that feature register and gpio is the pin. |
| 35 | */ |
| 36 | #define GPIO_OUTPUT_EN 0x00 |
| 37 | #define GPIO_PADDRV 0x08 |
| 38 | #define GPIO_INT_EN00 0x18 |
| 39 | #define GPIO_INT_EN10 0x20 |
| 40 | #define GPIO_INT_EN20 0x28 |
| 41 | #define GPIO_INT_EN30 0x30 |
| 42 | #define GPIO_INT_POL 0x38 |
| 43 | #define GPIO_INT_TYPE 0x40 |
| 44 | #define GPIO_INT_STAT 0x48 |
| 45 | |
| 46 | #define GPIO_9XX_BYTESWAP 0X00 |
| 47 | #define GPIO_9XX_CTRL 0X04 |
| 48 | #define GPIO_9XX_OUTPUT_EN 0x14 |
| 49 | #define GPIO_9XX_PADDRV 0x24 |
| 50 | /* |
| 51 | * Only for 4 interrupt enable reg are defined for now, |
| 52 | * total reg available are 12. |
| 53 | */ |
| 54 | #define GPIO_9XX_INT_EN00 0x44 |
| 55 | #define GPIO_9XX_INT_EN10 0x54 |
| 56 | #define GPIO_9XX_INT_EN20 0x64 |
| 57 | #define GPIO_9XX_INT_EN30 0x74 |
| 58 | #define GPIO_9XX_INT_POL 0x104 |
| 59 | #define GPIO_9XX_INT_TYPE 0x114 |
| 60 | #define GPIO_9XX_INT_STAT 0x124 |
| 61 | |
| 62 | #define GPIO_3XX_INT_EN00 0x18 |
| 63 | #define GPIO_3XX_INT_EN10 0x20 |
| 64 | #define GPIO_3XX_INT_EN20 0x28 |
| 65 | #define GPIO_3XX_INT_EN30 0x30 |
| 66 | #define GPIO_3XX_INT_POL 0x78 |
| 67 | #define GPIO_3XX_INT_TYPE 0x80 |
| 68 | #define GPIO_3XX_INT_STAT 0x88 |
| 69 | |
| 70 | /* Interrupt type register mask */ |
| 71 | #define XLP_GPIO_IRQ_TYPE_LVL 0x0 |
| 72 | #define XLP_GPIO_IRQ_TYPE_EDGE 0x1 |
| 73 | |
| 74 | /* Interrupt polarity register mask */ |
| 75 | #define XLP_GPIO_IRQ_POL_HIGH 0x0 |
| 76 | #define XLP_GPIO_IRQ_POL_LOW 0x1 |
| 77 | |
| 78 | #define XLP_GPIO_REGSZ 32 |
| 79 | #define XLP_GPIO_IRQ_BASE 768 |
| 80 | #define XLP_MAX_NR_GPIO 96 |
| 81 | |
| 82 | /* XLP variants supported by this driver */ |
| 83 | enum { |
| 84 | XLP_GPIO_VARIANT_XLP832 = 1, |
| 85 | XLP_GPIO_VARIANT_XLP316, |
| 86 | XLP_GPIO_VARIANT_XLP208, |
| 87 | XLP_GPIO_VARIANT_XLP980, |
Kamlakant Patel | dd98756 | 2016-03-24 15:01:40 +0530 | [diff] [blame] | 88 | XLP_GPIO_VARIANT_XLP532, |
| 89 | GPIO_VARIANT_VULCAN |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 90 | }; |
| 91 | |
| 92 | struct xlp_gpio_priv { |
| 93 | struct gpio_chip chip; |
| 94 | DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO); |
| 95 | void __iomem *gpio_intr_en; /* pointer to first intr enable reg */ |
| 96 | void __iomem *gpio_intr_stat; /* pointer to first intr status reg */ |
| 97 | void __iomem *gpio_intr_type; /* pointer to first intr type reg */ |
| 98 | void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */ |
| 99 | void __iomem *gpio_out_en; /* pointer to first output enable reg */ |
| 100 | void __iomem *gpio_paddrv; /* pointer to first pad drive reg */ |
| 101 | spinlock_t lock; |
| 102 | }; |
| 103 | |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 104 | static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio) |
| 105 | { |
| 106 | u32 pos, regset; |
| 107 | |
| 108 | pos = gpio % XLP_GPIO_REGSZ; |
| 109 | regset = (gpio / XLP_GPIO_REGSZ) * 4; |
| 110 | return !!(readl(addr + regset) & BIT(pos)); |
| 111 | } |
| 112 | |
| 113 | static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state) |
| 114 | { |
| 115 | u32 value, pos, regset; |
| 116 | |
| 117 | pos = gpio % XLP_GPIO_REGSZ; |
| 118 | regset = (gpio / XLP_GPIO_REGSZ) * 4; |
| 119 | value = readl(addr + regset); |
| 120 | |
| 121 | if (state) |
| 122 | value |= BIT(pos); |
| 123 | else |
| 124 | value &= ~BIT(pos); |
| 125 | |
| 126 | writel(value, addr + regset); |
| 127 | } |
| 128 | |
| 129 | static void xlp_gpio_irq_disable(struct irq_data *d) |
| 130 | { |
| 131 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
Linus Walleij | e730a59 | 2015-12-07 15:22:31 +0100 | [diff] [blame] | 132 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 133 | unsigned long flags; |
| 134 | |
| 135 | spin_lock_irqsave(&priv->lock, flags); |
| 136 | xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0); |
| 137 | __clear_bit(d->hwirq, priv->gpio_enabled_mask); |
| 138 | spin_unlock_irqrestore(&priv->lock, flags); |
| 139 | } |
| 140 | |
| 141 | static void xlp_gpio_irq_mask_ack(struct irq_data *d) |
| 142 | { |
| 143 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
Linus Walleij | e730a59 | 2015-12-07 15:22:31 +0100 | [diff] [blame] | 144 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 145 | unsigned long flags; |
| 146 | |
| 147 | spin_lock_irqsave(&priv->lock, flags); |
| 148 | xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0); |
| 149 | xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1); |
| 150 | __clear_bit(d->hwirq, priv->gpio_enabled_mask); |
| 151 | spin_unlock_irqrestore(&priv->lock, flags); |
| 152 | } |
| 153 | |
| 154 | static void xlp_gpio_irq_unmask(struct irq_data *d) |
| 155 | { |
| 156 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
Linus Walleij | e730a59 | 2015-12-07 15:22:31 +0100 | [diff] [blame] | 157 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 158 | unsigned long flags; |
| 159 | |
| 160 | spin_lock_irqsave(&priv->lock, flags); |
| 161 | xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1); |
| 162 | __set_bit(d->hwirq, priv->gpio_enabled_mask); |
| 163 | spin_unlock_irqrestore(&priv->lock, flags); |
| 164 | } |
| 165 | |
| 166 | static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type) |
| 167 | { |
| 168 | struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
Linus Walleij | e730a59 | 2015-12-07 15:22:31 +0100 | [diff] [blame] | 169 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 170 | int pol, irq_type; |
| 171 | |
| 172 | switch (type) { |
| 173 | case IRQ_TYPE_EDGE_RISING: |
| 174 | irq_type = XLP_GPIO_IRQ_TYPE_EDGE; |
| 175 | pol = XLP_GPIO_IRQ_POL_HIGH; |
| 176 | break; |
| 177 | case IRQ_TYPE_EDGE_FALLING: |
| 178 | irq_type = XLP_GPIO_IRQ_TYPE_EDGE; |
| 179 | pol = XLP_GPIO_IRQ_POL_LOW; |
| 180 | break; |
| 181 | case IRQ_TYPE_LEVEL_HIGH: |
| 182 | irq_type = XLP_GPIO_IRQ_TYPE_LVL; |
| 183 | pol = XLP_GPIO_IRQ_POL_HIGH; |
| 184 | break; |
| 185 | case IRQ_TYPE_LEVEL_LOW: |
| 186 | irq_type = XLP_GPIO_IRQ_TYPE_LVL; |
| 187 | pol = XLP_GPIO_IRQ_POL_LOW; |
| 188 | break; |
| 189 | default: |
| 190 | return -EINVAL; |
| 191 | } |
| 192 | |
| 193 | xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type); |
| 194 | xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol); |
| 195 | |
| 196 | return 0; |
| 197 | } |
| 198 | |
| 199 | static struct irq_chip xlp_gpio_irq_chip = { |
| 200 | .name = "XLP-GPIO", |
| 201 | .irq_mask_ack = xlp_gpio_irq_mask_ack, |
| 202 | .irq_disable = xlp_gpio_irq_disable, |
| 203 | .irq_set_type = xlp_gpio_set_irq_type, |
| 204 | .irq_unmask = xlp_gpio_irq_unmask, |
| 205 | .flags = IRQCHIP_ONESHOT_SAFE, |
| 206 | }; |
| 207 | |
Kamlakant Patel | 83ea24f | 2015-10-15 18:23:32 +0530 | [diff] [blame] | 208 | static void xlp_gpio_generic_handler(struct irq_desc *desc) |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 209 | { |
Kamlakant Patel | 83ea24f | 2015-10-15 18:23:32 +0530 | [diff] [blame] | 210 | struct xlp_gpio_priv *priv = irq_desc_get_handler_data(desc); |
| 211 | struct irq_chip *irqchip = irq_desc_get_chip(desc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 212 | int gpio, regoff; |
| 213 | u32 gpio_stat; |
| 214 | |
| 215 | regoff = -1; |
| 216 | gpio_stat = 0; |
Kamlakant Patel | 83ea24f | 2015-10-15 18:23:32 +0530 | [diff] [blame] | 217 | |
| 218 | chained_irq_enter(irqchip, desc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 219 | for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) { |
| 220 | if (regoff != gpio / XLP_GPIO_REGSZ) { |
| 221 | regoff = gpio / XLP_GPIO_REGSZ; |
| 222 | gpio_stat = readl(priv->gpio_intr_stat + regoff * 4); |
| 223 | } |
Kamlakant Patel | 83ea24f | 2015-10-15 18:23:32 +0530 | [diff] [blame] | 224 | |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 225 | if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ)) |
| 226 | generic_handle_irq(irq_find_mapping( |
| 227 | priv->chip.irqdomain, gpio)); |
| 228 | } |
Kamlakant Patel | 83ea24f | 2015-10-15 18:23:32 +0530 | [diff] [blame] | 229 | chained_irq_exit(irqchip, desc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 230 | } |
| 231 | |
| 232 | static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state) |
| 233 | { |
Linus Walleij | e730a59 | 2015-12-07 15:22:31 +0100 | [diff] [blame] | 234 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 235 | |
| 236 | BUG_ON(gpio >= gc->ngpio); |
| 237 | xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1); |
| 238 | |
| 239 | return 0; |
| 240 | } |
| 241 | |
| 242 | static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio) |
| 243 | { |
Linus Walleij | e730a59 | 2015-12-07 15:22:31 +0100 | [diff] [blame] | 244 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 245 | |
| 246 | BUG_ON(gpio >= gc->ngpio); |
| 247 | xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0); |
| 248 | |
| 249 | return 0; |
| 250 | } |
| 251 | |
| 252 | static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio) |
| 253 | { |
Linus Walleij | e730a59 | 2015-12-07 15:22:31 +0100 | [diff] [blame] | 254 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 255 | |
| 256 | BUG_ON(gpio >= gc->ngpio); |
| 257 | return xlp_gpio_get_reg(priv->gpio_paddrv, gpio); |
| 258 | } |
| 259 | |
| 260 | static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state) |
| 261 | { |
Linus Walleij | e730a59 | 2015-12-07 15:22:31 +0100 | [diff] [blame] | 262 | struct xlp_gpio_priv *priv = gpiochip_get_data(gc); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 263 | |
| 264 | BUG_ON(gpio >= gc->ngpio); |
| 265 | xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state); |
| 266 | } |
| 267 | |
| 268 | static const struct of_device_id xlp_gpio_of_ids[] = { |
| 269 | { |
| 270 | .compatible = "netlogic,xlp832-gpio", |
| 271 | .data = (void *)XLP_GPIO_VARIANT_XLP832, |
| 272 | }, |
| 273 | { |
| 274 | .compatible = "netlogic,xlp316-gpio", |
| 275 | .data = (void *)XLP_GPIO_VARIANT_XLP316, |
| 276 | }, |
| 277 | { |
| 278 | .compatible = "netlogic,xlp208-gpio", |
| 279 | .data = (void *)XLP_GPIO_VARIANT_XLP208, |
| 280 | }, |
| 281 | { |
| 282 | .compatible = "netlogic,xlp980-gpio", |
| 283 | .data = (void *)XLP_GPIO_VARIANT_XLP980, |
| 284 | }, |
| 285 | { |
| 286 | .compatible = "netlogic,xlp532-gpio", |
| 287 | .data = (void *)XLP_GPIO_VARIANT_XLP532, |
| 288 | }, |
Kamlakant Patel | dd98756 | 2016-03-24 15:01:40 +0530 | [diff] [blame] | 289 | { |
| 290 | .compatible = "brcm,vulcan-gpio", |
| 291 | .data = (void *)GPIO_VARIANT_VULCAN, |
| 292 | }, |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 293 | { /* sentinel */ }, |
| 294 | }; |
| 295 | MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids); |
| 296 | |
| 297 | static int xlp_gpio_probe(struct platform_device *pdev) |
| 298 | { |
| 299 | struct gpio_chip *gc; |
| 300 | struct resource *iores; |
| 301 | struct xlp_gpio_priv *priv; |
| 302 | const struct of_device_id *of_id; |
| 303 | void __iomem *gpio_base; |
| 304 | int irq_base, irq, err; |
| 305 | int ngpio; |
| 306 | u32 soc_type; |
| 307 | |
| 308 | iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 309 | if (!iores) |
| 310 | return -ENODEV; |
| 311 | |
| 312 | priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| 313 | if (!priv) |
| 314 | return -ENOMEM; |
| 315 | |
| 316 | gpio_base = devm_ioremap_resource(&pdev->dev, iores); |
| 317 | if (IS_ERR(gpio_base)) |
| 318 | return PTR_ERR(gpio_base); |
| 319 | |
| 320 | irq = platform_get_irq(pdev, 0); |
| 321 | if (irq < 0) |
| 322 | return irq; |
| 323 | |
| 324 | of_id = of_match_device(xlp_gpio_of_ids, &pdev->dev); |
| 325 | if (!of_id) { |
| 326 | dev_err(&pdev->dev, "Failed to get soc type!\n"); |
| 327 | return -ENODEV; |
| 328 | } |
| 329 | |
| 330 | soc_type = (uintptr_t) of_id->data; |
| 331 | |
| 332 | switch (soc_type) { |
| 333 | case XLP_GPIO_VARIANT_XLP832: |
| 334 | priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN; |
| 335 | priv->gpio_paddrv = gpio_base + GPIO_PADDRV; |
| 336 | priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT; |
| 337 | priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE; |
| 338 | priv->gpio_intr_pol = gpio_base + GPIO_INT_POL; |
| 339 | priv->gpio_intr_en = gpio_base + GPIO_INT_EN00; |
| 340 | ngpio = 41; |
| 341 | break; |
| 342 | case XLP_GPIO_VARIANT_XLP208: |
| 343 | case XLP_GPIO_VARIANT_XLP316: |
| 344 | priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN; |
| 345 | priv->gpio_paddrv = gpio_base + GPIO_PADDRV; |
| 346 | priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT; |
| 347 | priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE; |
| 348 | priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL; |
| 349 | priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00; |
| 350 | |
| 351 | ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57; |
| 352 | break; |
| 353 | case XLP_GPIO_VARIANT_XLP980: |
| 354 | case XLP_GPIO_VARIANT_XLP532: |
Kamlakant Patel | dd98756 | 2016-03-24 15:01:40 +0530 | [diff] [blame] | 355 | case GPIO_VARIANT_VULCAN: |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 356 | priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN; |
| 357 | priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV; |
| 358 | priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT; |
| 359 | priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE; |
| 360 | priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL; |
| 361 | priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00; |
| 362 | |
Kamlakant Patel | dd98756 | 2016-03-24 15:01:40 +0530 | [diff] [blame] | 363 | if (soc_type == XLP_GPIO_VARIANT_XLP980) |
| 364 | ngpio = 66; |
| 365 | else if (soc_type == XLP_GPIO_VARIANT_XLP532) |
| 366 | ngpio = 67; |
| 367 | else |
| 368 | ngpio = 70; |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 369 | break; |
| 370 | default: |
| 371 | dev_err(&pdev->dev, "Unknown Processor type!\n"); |
| 372 | return -ENODEV; |
| 373 | } |
| 374 | |
| 375 | bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO); |
| 376 | |
| 377 | gc = &priv->chip; |
| 378 | |
Axel Lin | b8a3f52 | 2015-05-07 15:34:37 +0800 | [diff] [blame] | 379 | gc->owner = THIS_MODULE; |
| 380 | gc->label = dev_name(&pdev->dev); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 381 | gc->base = 0; |
Linus Walleij | 58383c7 | 2015-11-04 09:56:26 +0100 | [diff] [blame] | 382 | gc->parent = &pdev->dev; |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 383 | gc->ngpio = ngpio; |
| 384 | gc->of_node = pdev->dev.of_node; |
| 385 | gc->direction_output = xlp_gpio_dir_output; |
| 386 | gc->direction_input = xlp_gpio_dir_input; |
| 387 | gc->set = xlp_gpio_set; |
| 388 | gc->get = xlp_gpio_get; |
| 389 | |
| 390 | spin_lock_init(&priv->lock); |
Kamlakant Patel | dd98756 | 2016-03-24 15:01:40 +0530 | [diff] [blame] | 391 | /* XLP has fixed IRQ range for GPIO interrupts */ |
| 392 | if (soc_type == GPIO_VARIANT_VULCAN) |
| 393 | irq_base = irq_alloc_descs(-1, 0, gc->ngpio, 0); |
| 394 | else |
| 395 | irq_base = irq_alloc_descs(-1, XLP_GPIO_IRQ_BASE, gc->ngpio, 0); |
Arnd Bergmann | 287980e | 2016-05-27 23:23:25 +0200 | [diff] [blame] | 396 | if (irq_base < 0) { |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 397 | dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n"); |
Kamlakant Patel | dd98756 | 2016-03-24 15:01:40 +0530 | [diff] [blame] | 398 | return irq_base; |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 399 | } |
| 400 | |
Linus Walleij | e730a59 | 2015-12-07 15:22:31 +0100 | [diff] [blame] | 401 | err = gpiochip_add_data(gc, priv); |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 402 | if (err < 0) |
| 403 | goto out_free_desc; |
| 404 | |
| 405 | err = gpiochip_irqchip_add(gc, &xlp_gpio_irq_chip, irq_base, |
| 406 | handle_level_irq, IRQ_TYPE_NONE); |
| 407 | if (err) { |
| 408 | dev_err(&pdev->dev, "Could not connect irqchip to gpiochip!\n"); |
| 409 | goto out_gpio_remove; |
| 410 | } |
| 411 | |
Kamlakant Patel | 83ea24f | 2015-10-15 18:23:32 +0530 | [diff] [blame] | 412 | gpiochip_set_chained_irqchip(gc, &xlp_gpio_irq_chip, irq, |
| 413 | xlp_gpio_generic_handler); |
| 414 | |
Kamlakant Patel | ff71880 | 2015-04-28 20:10:45 +0530 | [diff] [blame] | 415 | dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio); |
| 416 | |
| 417 | return 0; |
| 418 | |
| 419 | out_gpio_remove: |
| 420 | gpiochip_remove(gc); |
| 421 | out_free_desc: |
| 422 | irq_free_descs(irq_base, gc->ngpio); |
| 423 | return err; |
| 424 | } |
| 425 | |
| 426 | static struct platform_driver xlp_gpio_driver = { |
| 427 | .driver = { |
| 428 | .name = "xlp-gpio", |
| 429 | .of_match_table = xlp_gpio_of_ids, |
| 430 | }, |
| 431 | .probe = xlp_gpio_probe, |
| 432 | }; |
| 433 | module_platform_driver(xlp_gpio_driver); |
| 434 | |
| 435 | MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>"); |
| 436 | MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>"); |
| 437 | MODULE_DESCRIPTION("Netlogic XLP GPIO Driver"); |
| 438 | MODULE_LICENSE("GPL v2"); |