blob: 18b92cbf4a9fd3768ad98c3f3ebcbb801215d991 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * dv1394-private.h - DV input/output over IEEE 1394 on OHCI chips
3 * Copyright (C)2001 Daniel Maas <dmaas@dcine.com>
4 * receive by Dan Dennedy <dan@dennedy.org>
5 *
6 * based on:
7 * video1394.h - driver for OHCI 1394 boards
8 * Copyright (C)1999,2000 Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au>
9 * Peter Schlaile <udbz@rz.uni-karlsruhe.de>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software Foundation,
23 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24 */
25
26#ifndef _DV_1394_PRIVATE_H
27#define _DV_1394_PRIVATE_H
28
29#include "ieee1394.h"
30#include "ohci1394.h"
31#include "dma.h"
32
33/* data structures private to the dv1394 driver */
34/* none of this is exposed to user-space */
35
36
37/*
38 the 8-byte CIP (Common Isochronous Packet) header that precedes
39 each packet of DV data.
40
41 See the IEC 61883 standard.
42*/
43
44struct CIP_header { unsigned char b[8]; };
45
46static inline void fill_cip_header(struct CIP_header *cip,
47 unsigned char source_node_id,
48 unsigned long counter,
49 enum pal_or_ntsc format,
50 unsigned long timestamp)
51{
52 cip->b[0] = source_node_id;
53 cip->b[1] = 0x78; /* packet size in quadlets (480/4) - even for empty packets! */
54 cip->b[2] = 0x00;
55 cip->b[3] = counter;
56
57 cip->b[4] = 0x80; /* const */
58
59 switch(format) {
60 case DV1394_PAL:
61 cip->b[5] = 0x80;
62 break;
63 case DV1394_NTSC:
64 cip->b[5] = 0x00;
65 break;
66 }
67
68 cip->b[6] = timestamp >> 8;
69 cip->b[7] = timestamp & 0xFF;
70}
71
72
73
74/*
75 DMA commands used to program the OHCI's DMA engine
76
77 See the Texas Instruments OHCI 1394 chipset documentation.
78*/
79
Harvey Harrison7d7039d2008-12-13 15:20:39 -080080struct output_more_immediate { __le32 q[8]; };
81struct output_more { __le32 q[4]; };
82struct output_last { __le32 q[4]; };
83struct input_more { __le32 q[4]; };
84struct input_last { __le32 q[4]; };
Linus Torvalds1da177e2005-04-16 15:20:36 -070085
86/* outputs */
87
88static inline void fill_output_more_immediate(struct output_more_immediate *omi,
89 unsigned char tag,
90 unsigned char channel,
91 unsigned char sync_tag,
92 unsigned int payload_size)
93{
94 omi->q[0] = cpu_to_le32(0x02000000 | 8); /* OUTPUT_MORE_IMMEDIATE; 8 is the size of the IT header */
Harvey Harrison7d7039d2008-12-13 15:20:39 -080095 omi->q[1] = cpu_to_le32(0);
96 omi->q[2] = cpu_to_le32(0);
97 omi->q[3] = cpu_to_le32(0);
Linus Torvalds1da177e2005-04-16 15:20:36 -070098
99 /* IT packet header */
100 omi->q[4] = cpu_to_le32( (0x0 << 16) /* IEEE1394_SPEED_100 */
101 | (tag << 14)
102 | (channel << 8)
103 | (TCODE_ISO_DATA << 4)
104 | (sync_tag) );
105
106 /* reserved field; mimic behavior of my Sony DSR-40 */
107 omi->q[5] = cpu_to_le32((payload_size << 16) | (0x7F << 8) | 0xA0);
108
Harvey Harrison7d7039d2008-12-13 15:20:39 -0800109 omi->q[6] = cpu_to_le32(0);
110 omi->q[7] = cpu_to_le32(0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111}
112
113static inline void fill_output_more(struct output_more *om,
114 unsigned int data_size,
115 unsigned long data_phys_addr)
116{
117 om->q[0] = cpu_to_le32(data_size);
118 om->q[1] = cpu_to_le32(data_phys_addr);
Harvey Harrison7d7039d2008-12-13 15:20:39 -0800119 om->q[2] = cpu_to_le32(0);
120 om->q[3] = cpu_to_le32(0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121}
122
123static inline void fill_output_last(struct output_last *ol,
124 int want_timestamp,
125 int want_interrupt,
126 unsigned int data_size,
127 unsigned long data_phys_addr)
128{
129 u32 temp = 0;
130 temp |= 1 << 28; /* OUTPUT_LAST */
131
132 if (want_timestamp) /* controller will update timestamp at DMA time */
133 temp |= 1 << 27;
134
135 if (want_interrupt)
136 temp |= 3 << 20;
137
138 temp |= 3 << 18; /* must take branch */
139 temp |= data_size;
140
141 ol->q[0] = cpu_to_le32(temp);
142 ol->q[1] = cpu_to_le32(data_phys_addr);
Harvey Harrison7d7039d2008-12-13 15:20:39 -0800143 ol->q[2] = cpu_to_le32(0);
144 ol->q[3] = cpu_to_le32(0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145}
146
147/* inputs */
148
149static inline void fill_input_more(struct input_more *im,
150 int want_interrupt,
151 unsigned int data_size,
152 unsigned long data_phys_addr)
153{
154 u32 temp = 2 << 28; /* INPUT_MORE */
155 temp |= 8 << 24; /* s = 1, update xferStatus and resCount */
156 if (want_interrupt)
157 temp |= 0 << 20; /* interrupts, i=0 in packet-per-buffer mode */
158 temp |= 0x0 << 16; /* disable branch to address for packet-per-buffer mode */
159 /* disable wait on sync field, not used in DV :-( */
160 temp |= data_size;
161
162 im->q[0] = cpu_to_le32(temp);
163 im->q[1] = cpu_to_le32(data_phys_addr);
Harvey Harrison7d7039d2008-12-13 15:20:39 -0800164 im->q[2] = cpu_to_le32(0); /* branchAddress and Z not use in packet-per-buffer mode */
165 im->q[3] = cpu_to_le32(0); /* xferStatus & resCount, resCount must be initialize to data_size */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166}
167
168static inline void fill_input_last(struct input_last *il,
169 int want_interrupt,
170 unsigned int data_size,
171 unsigned long data_phys_addr)
172{
173 u32 temp = 3 << 28; /* INPUT_LAST */
174 temp |= 8 << 24; /* s = 1, update xferStatus and resCount */
175 if (want_interrupt)
176 temp |= 3 << 20; /* enable interrupts */
177 temp |= 0xC << 16; /* enable branch to address */
178 /* disable wait on sync field, not used in DV :-( */
179 temp |= data_size;
180
181 il->q[0] = cpu_to_le32(temp);
182 il->q[1] = cpu_to_le32(data_phys_addr);
183 il->q[2] = cpu_to_le32(1); /* branchAddress (filled in later) and Z = 1 descriptor in next block */
184 il->q[3] = cpu_to_le32(data_size); /* xferStatus & resCount, resCount must be initialize to data_size */
185}
186
187
188
189/*
190 A "DMA descriptor block" consists of several contiguous DMA commands.
191 struct DMA_descriptor_block encapsulates all of the commands necessary
192 to send one packet of DV data.
193
194 There are three different types of these blocks:
195
196 1) command to send an empty packet (CIP header only, no DV data):
197
198 OUTPUT_MORE-Immediate <-- contains the iso header in-line
199 OUTPUT_LAST <-- points to the CIP header
200
201 2) command to send a full packet when the DV data payload does NOT
202 cross a page boundary:
203
204 OUTPUT_MORE-Immediate <-- contains the iso header in-line
205 OUTPUT_MORE <-- points to the CIP header
206 OUTPUT_LAST <-- points to entire DV data payload
207
208 3) command to send a full packet when the DV payload DOES cross
209 a page boundary:
210
211 OUTPUT_MORE-Immediate <-- contains the iso header in-line
212 OUTPUT_MORE <-- points to the CIP header
213 OUTPUT_MORE <-- points to first part of DV data payload
214 OUTPUT_LAST <-- points to second part of DV data payload
215
216 This struct describes all three block types using unions.
217
218 !!! It is vital that an even number of these descriptor blocks fit on one
219 page of memory, since a block cannot cross a page boundary !!!
220
221 */
222
223struct DMA_descriptor_block {
224
225 union {
226 struct {
227 /* iso header, common to all output block types */
228 struct output_more_immediate omi;
229
230 union {
231 /* empty packet */
232 struct {
233 struct output_last ol; /* CIP header */
234 } empty;
235
236 /* full packet */
237 struct {
238 struct output_more om; /* CIP header */
239
240 union {
241 /* payload does not cross page boundary */
242 struct {
243 struct output_last ol; /* data payload */
244 } nocross;
245
246 /* payload crosses page boundary */
247 struct {
248 struct output_more om; /* data payload */
249 struct output_last ol; /* data payload */
250 } cross;
251 } u;
252
253 } full;
254 } u;
255 } out;
256
257 struct {
258 struct input_last il;
259 } in;
260
261 } u;
262
263 /* ensure that PAGE_SIZE % sizeof(struct DMA_descriptor_block) == 0
264 by padding out to 128 bytes */
265 u32 __pad__[12];
266};
267
268
269/* struct frame contains all data associated with one frame in the
270 ringbuffer these are allocated when the DMA context is initialized
271 do_dv1394_init(). They are re-used after the card finishes
272 transmitting the frame. */
273
274struct video_card; /* forward declaration */
275
276struct frame {
277
278 /* points to the struct video_card that owns this frame */
279 struct video_card *video;
280
281 /* index of this frame in video_card->frames[] */
282 unsigned int frame_num;
283
284 /* FRAME_CLEAR - DMA program not set up, waiting for data
285 FRAME_READY - DMA program written, ready to transmit
286
287 Changes to these should be locked against the interrupt
288 */
289 enum {
290 FRAME_CLEAR = 0,
291 FRAME_READY
292 } state;
293
294 /* whether this frame has been DMA'ed already; used only from
295 the IRQ handler to determine whether the frame can be reset */
296 int done;
297
298
299 /* kernel virtual pointer to the start of this frame's data in
300 the user ringbuffer. Use only for CPU access; to get the DMA
301 bus address you must go through the video->user_dma mapping */
302 unsigned long data;
303
304 /* Max # of packets per frame */
305#define MAX_PACKETS 500
306
307
308 /* a PAGE_SIZE memory pool for allocating CIP headers
309 !header_pool must be aligned to PAGE_SIZE! */
310 struct CIP_header *header_pool;
311 dma_addr_t header_pool_dma;
312
313
314 /* a physically contiguous memory pool for allocating DMA
315 descriptor blocks; usually around 64KB in size
316 !descriptor_pool must be aligned to PAGE_SIZE! */
317 struct DMA_descriptor_block *descriptor_pool;
318 dma_addr_t descriptor_pool_dma;
319 unsigned long descriptor_pool_size;
320
321
322 /* # of packets allocated for this frame */
323 unsigned int n_packets;
324
325
326 /* below are several pointers (kernel virtual addresses, not
327 DMA bus addresses) to parts of the DMA program. These are
328 set each time the DMA program is written in
329 frame_prepare(). They are used later on, e.g. from the
330 interrupt handler, to check the status of the frame */
331
332 /* points to status/timestamp field of first DMA packet */
333 /* (we'll check it later to monitor timestamp accuracy) */
Harvey Harrison7d7039d2008-12-13 15:20:39 -0800334 __le32 *frame_begin_timestamp;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700335
336 /* the timestamp we assigned to the first packet in the frame */
337 u32 assigned_timestamp;
338
339 /* pointer to the first packet's CIP header (where the timestamp goes) */
340 struct CIP_header *cip_syt1;
341
342 /* pointer to the second packet's CIP header
343 (only set if the first packet was empty) */
344 struct CIP_header *cip_syt2;
345
346 /* in order to figure out what caused an interrupt,
347 store pointers to the status fields of the two packets
348 that can cause interrupts. We'll check these from the
349 interrupt handler.
350 */
Harvey Harrison7d7039d2008-12-13 15:20:39 -0800351 __le32 *mid_frame_timestamp;
352 __le32 *frame_end_timestamp;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700353
354 /* branch address field of final packet. This is effectively
355 the "tail" in the chain of DMA descriptor blocks.
356 We will fill it with the address of the first DMA descriptor
357 block in the subsequent frame, once it is ready.
358 */
Harvey Harrison7d7039d2008-12-13 15:20:39 -0800359 __le32 *frame_end_branch;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700360
361 /* the number of descriptors in the first descriptor block
362 of the frame. Needed to start DMA */
363 int first_n_descriptors;
364};
365
366
367struct packet {
Harvey Harrison7d7039d2008-12-13 15:20:39 -0800368 __le16 timestamp;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700369 u16 invalid;
370 u16 iso_header;
Harvey Harrison7d7039d2008-12-13 15:20:39 -0800371 __le16 data_length;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372 u32 cip_h1;
373 u32 cip_h2;
374 unsigned char data[480];
375 unsigned char padding[16]; /* force struct size =512 for page alignment */
376};
377
378
379/* allocate/free a frame */
380static struct frame* frame_new(unsigned int frame_num, struct video_card *video);
381static void frame_delete(struct frame *f);
382
383/* reset f so that it can be used again */
384static void frame_reset(struct frame *f);
385
386/* struct video_card contains all data associated with one instance
387 of the dv1394 driver
388*/
389enum modes {
390 MODE_RECEIVE,
391 MODE_TRANSMIT
392};
393
394struct video_card {
395
396 /* ohci card to which this instance corresponds */
397 struct ti_ohci *ohci;
398
399 /* OHCI card id; the link between the VFS inode and a specific video_card
400 (essentially the device minor number) */
401 int id;
402
403 /* entry in dv1394_cards */
404 struct list_head list;
405
406 /* OHCI card IT DMA context number, -1 if not in use */
407 int ohci_it_ctx;
408 struct ohci1394_iso_tasklet it_tasklet;
409
410 /* register offsets for current IT DMA context, 0 if not in use */
411 u32 ohci_IsoXmitContextControlSet;
412 u32 ohci_IsoXmitContextControlClear;
413 u32 ohci_IsoXmitCommandPtr;
414
415 /* OHCI card IR DMA context number, -1 if not in use */
416 struct ohci1394_iso_tasklet ir_tasklet;
417 int ohci_ir_ctx;
418
419 /* register offsets for current IR DMA context, 0 if not in use */
420 u32 ohci_IsoRcvContextControlSet;
421 u32 ohci_IsoRcvContextControlClear;
422 u32 ohci_IsoRcvCommandPtr;
423 u32 ohci_IsoRcvContextMatch;
424
425
426 /* CONCURRENCY CONTROL */
427
428 /* there are THREE levels of locking associated with video_card. */
429
430 /*
431 1) the 'open' flag - this prevents more than one process from
432 opening the device. (the driver currently assumes only one opener).
433 This is a regular int, but use test_and_set_bit() (on bit zero)
434 for atomicity.
435 */
436 unsigned long open;
437
438 /*
439 2) the spinlock - this provides mutual exclusion between the interrupt
440 handler and process-context operations. Generally you must take the
441 spinlock under the following conditions:
442 1) DMA (and hence the interrupt handler) may be running
443 AND
444 2) you need to operate on the video_card, especially active_frame
445
446 It is OK to play with video_card without taking the spinlock if
447 you are certain that DMA is not running. Even if DMA is running,
448 it is OK to *read* active_frame with the lock, then drop it
449 immediately. This is safe because the interrupt handler will never
450 advance active_frame onto a frame that is not READY (and the spinlock
451 must be held while marking a frame READY).
452
453 spinlock is also used to protect ohci_it_ctx and ohci_ir_ctx,
454 which can be accessed from both process and interrupt context
455 */
456 spinlock_t spinlock;
457
458 /* flag to prevent spurious interrupts (which OHCI seems to
459 generate a lot :) from accessing the struct */
460 int dma_running;
461
462 /*
Stefan Richter438bd522006-07-03 12:02:32 -0400463 3) the sleeping mutex 'mtx' - this is used from process context only,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700464 to serialize various operations on the video_card. Even though only one
465 open() is allowed, we still need to prevent multiple threads of execution
466 from entering calls like read, write, ioctl, etc.
467
468 I honestly can't think of a good reason to use dv1394 from several threads
469 at once, but we need to serialize anyway to prevent oopses =).
470
Stefan Richter438bd522006-07-03 12:02:32 -0400471 NOTE: if you need both spinlock and mtx, take mtx first to avoid deadlock!
Linus Torvalds1da177e2005-04-16 15:20:36 -0700472 */
Stefan Richter438bd522006-07-03 12:02:32 -0400473 struct mutex mtx;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700474
475 /* people waiting for buffer space, please form a line here... */
476 wait_queue_head_t waitq;
477
478 /* support asynchronous I/O signals (SIGIO) */
479 struct fasync_struct *fasync;
480
481 /* the large, non-contiguous (rvmalloc()) ringbuffer for DV
482 data, exposed to user-space via mmap() */
483 unsigned long dv_buf_size;
484 struct dma_region dv_buf;
485
486 /* next byte in the ringbuffer that a write() call will fill */
487 size_t write_off;
488
489 struct frame *frames[DV1394_MAX_FRAMES];
490
491 /* n_frames also serves as an indicator that this struct video_card is
492 initialized and ready to run DMA buffers */
493
494 int n_frames;
495
496 /* this is the frame that is currently "owned" by the OHCI DMA controller
497 (set to -1 iff DMA is not running)
498
499 ! must lock against the interrupt handler when accessing it !
500
501 RULES:
502
503 Only the interrupt handler may change active_frame if DMA
504 is running; if not, process may change it
505
506 If the next frame is READY, the interrupt handler will advance
507 active_frame when the current frame is finished.
508
509 If the next frame is CLEAR, the interrupt handler will re-transmit
510 the current frame, and the dropped_frames counter will be incremented.
511
512 The interrupt handler will NEVER advance active_frame to a
513 frame that is not READY.
514 */
515 int active_frame;
516 int first_run;
517
518 /* the same locking rules apply to these three fields also: */
519
520 /* altered ONLY from process context. Must check first_clear_frame->state;
521 if it's READY, that means the ringbuffer is full with READY frames;
522 if it's CLEAR, that means one or more ringbuffer frames are CLEAR */
523 unsigned int first_clear_frame;
524
525 /* altered both by process and interrupt */
526 unsigned int n_clear_frames;
527
528 /* only altered by the interrupt */
529 unsigned int dropped_frames;
530
531
532
533 /* the CIP accumulator and continuity counter are properties
534 of the DMA stream as a whole (not a single frame), so they
535 are stored here in the video_card */
536
537 unsigned long cip_accum;
538 unsigned long cip_n, cip_d;
539 unsigned int syt_offset;
540 unsigned int continuity_counter;
541
542 enum pal_or_ntsc pal_or_ntsc;
543
544 /* redundant, but simplifies the code somewhat */
545 unsigned int frame_size; /* in bytes */
546
547 /* the isochronous channel to use, -1 if video card is inactive */
548 int channel;
549
550
551 /* physically contiguous packet ringbuffer for receive */
552 struct dma_region packet_buf;
553 unsigned long packet_buf_size;
554
555 unsigned int current_packet;
556 int first_frame; /* received first start frame marker? */
557 enum modes mode;
558};
559
560/*
561 if the video_card is not initialized, then the ONLY fields that are valid are:
562 ohci
563 open
564 n_frames
565*/
566
567static inline int video_card_initialized(struct video_card *v)
568{
569 return v->n_frames > 0;
570}
571
572static int do_dv1394_init(struct video_card *video, struct dv1394_init *init);
573static int do_dv1394_init_default(struct video_card *video);
574static void do_dv1394_shutdown(struct video_card *video, int free_user_buf);
575
576
577/* NTSC empty packet rate accurate to within 0.01%,
578 calibrated against a Sony DSR-40 DVCAM deck */
579
580#define CIP_N_NTSC 68000000
581#define CIP_D_NTSC 1068000000
582
583#define CIP_N_PAL 1
584#define CIP_D_PAL 16
585
586#endif /* _DV_1394_PRIVATE_H */
587