Linus Walleij | 2440d29 | 2016-02-18 14:23:31 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2016 Linaro Ltd |
| 3 | * |
| 4 | * Permission is hereby granted, free of charge, to any person obtaining a copy |
| 5 | * of this software and associated documentation files (the "Software"), to deal |
| 6 | * in the Software without restriction, including without limitation the rights |
| 7 | * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| 8 | * copies of the Software, and to permit persons to whom the Software is |
| 9 | * furnished to do so, subject to the following conditions: |
| 10 | * |
| 11 | * The above copyright notice and this permission notice shall be included in |
| 12 | * all copies or substantial portions of the Software. |
| 13 | * |
| 14 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| 15 | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| 16 | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| 17 | * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| 18 | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| 19 | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| 20 | * THE SOFTWARE. |
| 21 | */ |
| 22 | |
| 23 | #include <dt-bindings/interrupt-controller/irq.h> |
| 24 | #include <dt-bindings/gpio/gpio.h> |
| 25 | #include "skeleton.dtsi" |
| 26 | |
| 27 | / { |
| 28 | compatible = "arm,realview-eb"; |
| 29 | |
| 30 | chosen { }; |
| 31 | |
| 32 | aliases { |
| 33 | serial0 = &serial0; |
| 34 | serial1 = &serial1; |
| 35 | serial2 = &serial2; |
| 36 | serial3 = &serial3; |
| 37 | i2c0 = &i2c; |
| 38 | }; |
| 39 | |
| 40 | memory { |
| 41 | /* 128 MiB memory @ 0x0 */ |
| 42 | reg = <0x00000000 0x08000000>; |
| 43 | }; |
| 44 | |
| 45 | /* The voltage to the MMC card is hardwired at 3.3V */ |
| 46 | vmmc: fixedregulator@0 { |
| 47 | compatible = "regulator-fixed"; |
| 48 | regulator-name = "vmmc"; |
| 49 | regulator-min-microvolt = <3300000>; |
| 50 | regulator-max-microvolt = <3300000>; |
| 51 | regulator-boot-on; |
| 52 | }; |
| 53 | |
Linus Walleij | 2440d29 | 2016-02-18 14:23:31 +0100 | [diff] [blame] | 54 | xtal24mhz: xtal24mhz@24M { |
| 55 | #clock-cells = <0>; |
| 56 | compatible = "fixed-clock"; |
| 57 | clock-frequency = <24000000>; |
| 58 | }; |
| 59 | |
| 60 | timclk: timclk@1M { |
| 61 | #clock-cells = <0>; |
| 62 | compatible = "fixed-factor-clock"; |
| 63 | clock-div = <24>; |
| 64 | clock-mult = <1>; |
| 65 | clocks = <&xtal24mhz>; |
| 66 | }; |
| 67 | |
| 68 | mclk: mclk@24M { |
| 69 | #clock-cells = <0>; |
| 70 | compatible = "fixed-factor-clock"; |
| 71 | clock-div = <1>; |
| 72 | clock-mult = <1>; |
| 73 | clocks = <&xtal24mhz>; |
| 74 | }; |
| 75 | |
| 76 | kmiclk: kmiclk@24M { |
| 77 | #clock-cells = <0>; |
| 78 | compatible = "fixed-factor-clock"; |
| 79 | clock-div = <1>; |
| 80 | clock-mult = <1>; |
| 81 | clocks = <&xtal24mhz>; |
| 82 | }; |
| 83 | |
| 84 | sspclk: sspclk@24M { |
| 85 | #clock-cells = <0>; |
| 86 | compatible = "fixed-factor-clock"; |
| 87 | clock-div = <1>; |
| 88 | clock-mult = <1>; |
| 89 | clocks = <&xtal24mhz>; |
| 90 | }; |
| 91 | |
| 92 | uartclk: uartclk@24M { |
| 93 | #clock-cells = <0>; |
| 94 | compatible = "fixed-factor-clock"; |
| 95 | clock-div = <1>; |
| 96 | clock-mult = <1>; |
| 97 | clocks = <&xtal24mhz>; |
| 98 | }; |
| 99 | |
| 100 | wdogclk: wdogclk@24M { |
| 101 | #clock-cells = <0>; |
| 102 | compatible = "fixed-factor-clock"; |
| 103 | clock-div = <1>; |
| 104 | clock-mult = <1>; |
| 105 | clocks = <&xtal24mhz>; |
| 106 | }; |
| 107 | |
| 108 | /* FIXME: this actually hangs off the PLL clocks */ |
| 109 | pclk: pclk@0 { |
| 110 | #clock-cells = <0>; |
| 111 | compatible = "fixed-clock"; |
| 112 | clock-frequency = <0>; |
| 113 | }; |
| 114 | |
| 115 | flash0@40000000 { |
| 116 | /* 2 * 32MiB NOR Flash memory */ |
| 117 | compatible = "arm,versatile-flash", "cfi-flash"; |
| 118 | reg = <0x40000000 0x04000000>; |
| 119 | bank-width = <4>; |
| 120 | }; |
| 121 | |
| 122 | flash1@44000000 { |
| 123 | /* 2 * 32MiB NOR Flash memory */ |
| 124 | compatible = "arm,versatile-flash", "cfi-flash"; |
| 125 | reg = <0x44000000 0x04000000>; |
| 126 | bank-width = <4>; |
| 127 | }; |
| 128 | |
Linus Walleij | c4ad725 | 2016-09-08 10:48:38 +0200 | [diff] [blame] | 129 | /* SMSC LAN91C111 ethernet with PHY and EEPROM */ |
Linus Walleij | 2440d29 | 2016-02-18 14:23:31 +0100 | [diff] [blame] | 130 | ethernet: ethernet@4e000000 { |
Linus Walleij | c4ad725 | 2016-09-08 10:48:38 +0200 | [diff] [blame] | 131 | compatible = "smsc,lan91c111"; |
Linus Walleij | 2440d29 | 2016-02-18 14:23:31 +0100 | [diff] [blame] | 132 | reg = <0x4e000000 0x10000>; |
Linus Walleij | c4ad725 | 2016-09-08 10:48:38 +0200 | [diff] [blame] | 133 | /* |
| 134 | * This means the adapter can be accessed with 8, 16 or |
| 135 | * 32 bit reads/writes. |
| 136 | */ |
| 137 | reg-io-width = <7>; |
Linus Walleij | 2440d29 | 2016-02-18 14:23:31 +0100 | [diff] [blame] | 138 | }; |
| 139 | |
| 140 | usb: usb@4f000000 { |
| 141 | compatible = "nxp,usb-isp1761"; |
| 142 | reg = <0x4f000000 0x20000>; |
| 143 | port1-otg; |
| 144 | }; |
| 145 | |
| 146 | /* These peripherals are inside the FPGA */ |
| 147 | fpga { |
| 148 | #address-cells = <1>; |
| 149 | #size-cells = <1>; |
| 150 | compatible = "simple-bus"; |
| 151 | ranges; |
| 152 | |
| 153 | syscon: syscon@10000000 { |
| 154 | compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd"; |
| 155 | reg = <0x10000000 0x1000>; |
| 156 | |
| 157 | led@08.0 { |
| 158 | compatible = "register-bit-led"; |
| 159 | offset = <0x08>; |
| 160 | mask = <0x01>; |
| 161 | label = "versatile:0"; |
| 162 | linux,default-trigger = "heartbeat"; |
| 163 | default-state = "on"; |
| 164 | }; |
| 165 | led@08.1 { |
| 166 | compatible = "register-bit-led"; |
| 167 | offset = <0x08>; |
| 168 | mask = <0x02>; |
| 169 | label = "versatile:1"; |
| 170 | linux,default-trigger = "mmc0"; |
| 171 | default-state = "off"; |
| 172 | }; |
| 173 | led@08.2 { |
| 174 | compatible = "register-bit-led"; |
| 175 | offset = <0x08>; |
| 176 | mask = <0x04>; |
| 177 | label = "versatile:2"; |
| 178 | linux,default-trigger = "cpu0"; |
| 179 | default-state = "off"; |
| 180 | }; |
| 181 | led@08.3 { |
| 182 | compatible = "register-bit-led"; |
| 183 | offset = <0x08>; |
| 184 | mask = <0x08>; |
| 185 | label = "versatile:3"; |
| 186 | default-state = "off"; |
| 187 | }; |
| 188 | led@08.4 { |
| 189 | compatible = "register-bit-led"; |
| 190 | offset = <0x08>; |
| 191 | mask = <0x10>; |
| 192 | label = "versatile:4"; |
| 193 | default-state = "off"; |
| 194 | }; |
| 195 | led@08.5 { |
| 196 | compatible = "register-bit-led"; |
| 197 | offset = <0x08>; |
| 198 | mask = <0x20>; |
| 199 | label = "versatile:5"; |
| 200 | default-state = "off"; |
| 201 | }; |
| 202 | led@08.6 { |
| 203 | compatible = "register-bit-led"; |
| 204 | offset = <0x08>; |
| 205 | mask = <0x40>; |
| 206 | label = "versatile:6"; |
| 207 | default-state = "off"; |
| 208 | }; |
| 209 | led@08.7 { |
| 210 | compatible = "register-bit-led"; |
| 211 | offset = <0x08>; |
| 212 | mask = <0x80>; |
| 213 | label = "versatile:7"; |
| 214 | default-state = "off"; |
| 215 | }; |
| 216 | oscclk0: osc0@0c { |
| 217 | compatible = "arm,syscon-icst307"; |
| 218 | #clock-cells = <0>; |
| 219 | lock-offset = <0x20>; |
| 220 | vco-offset = <0x0C>; |
| 221 | clocks = <&xtal24mhz>; |
| 222 | }; |
| 223 | oscclk1: osc1@10 { |
| 224 | compatible = "arm,syscon-icst307"; |
| 225 | #clock-cells = <0>; |
| 226 | lock-offset = <0x20>; |
| 227 | vco-offset = <0x10>; |
| 228 | clocks = <&xtal24mhz>; |
| 229 | }; |
| 230 | oscclk2: osc2@14 { |
| 231 | compatible = "arm,syscon-icst307"; |
| 232 | #clock-cells = <0>; |
| 233 | lock-offset = <0x20>; |
| 234 | vco-offset = <0x14>; |
| 235 | clocks = <&xtal24mhz>; |
| 236 | }; |
| 237 | oscclk3: osc3@18 { |
| 238 | compatible = "arm,syscon-icst307"; |
| 239 | #clock-cells = <0>; |
| 240 | lock-offset = <0x20>; |
| 241 | vco-offset = <0x18>; |
| 242 | clocks = <&xtal24mhz>; |
| 243 | }; |
| 244 | oscclk4: osc4@1c { |
| 245 | compatible = "arm,syscon-icst307"; |
| 246 | #clock-cells = <0>; |
| 247 | lock-offset = <0x20>; |
| 248 | vco-offset = <0x1c>; |
| 249 | clocks = <&xtal24mhz>; |
| 250 | }; |
| 251 | }; |
| 252 | |
| 253 | i2c: i2c@10002000 { |
| 254 | #address-cells = <1>; |
| 255 | #size-cells = <0>; |
| 256 | compatible = "arm,versatile-i2c"; |
| 257 | reg = <0x10002000 0x1000>; |
| 258 | |
| 259 | rtc@68 { |
| 260 | compatible = "dallas,ds1338"; |
| 261 | reg = <0x68>; |
| 262 | }; |
| 263 | }; |
| 264 | |
| 265 | aaci: aaci@10004000 { |
| 266 | compatible = "arm,pl041", "arm,primecell"; |
| 267 | reg = <0x10004000 0x1000>; |
| 268 | clocks = <&pclk>; |
| 269 | clock-names = "apb_pclk"; |
| 270 | }; |
| 271 | |
| 272 | mmc: mmcsd@10005000 { |
| 273 | compatible = "arm,pl18x", "arm,primecell"; |
| 274 | reg = <0x10005000 0x1000>; |
| 275 | |
| 276 | /* Due to frequent FIFO overruns, use just 500 kHz */ |
| 277 | max-frequency = <500000>; |
| 278 | bus-width = <4>; |
| 279 | cap-sd-highspeed; |
| 280 | cap-mmc-highspeed; |
| 281 | clocks = <&mclk>, <&pclk>; |
| 282 | clock-names = "mclk", "apb_pclk"; |
| 283 | vmmc-supply = <&vmmc>; |
| 284 | cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; |
| 285 | wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| 286 | }; |
| 287 | |
| 288 | kmi0: kmi@10006000 { |
| 289 | compatible = "arm,pl050", "arm,primecell"; |
| 290 | reg = <0x10006000 0x1000>; |
| 291 | clocks = <&kmiclk>, <&pclk>; |
| 292 | clock-names = "KMIREFCLK", "apb_pclk"; |
| 293 | }; |
| 294 | |
| 295 | kmi1: kmi@10007000 { |
| 296 | compatible = "arm,pl050", "arm,primecell"; |
| 297 | reg = <0x10007000 0x1000>; |
| 298 | clocks = <&kmiclk>, <&pclk>; |
| 299 | clock-names = "KMIREFCLK", "apb_pclk"; |
| 300 | }; |
| 301 | |
| 302 | charlcd: fpga_charlcd: charlcd@10008000 { |
| 303 | compatible = "arm,versatile-lcd"; |
| 304 | reg = <0x10008000 0x1000>; |
| 305 | clocks = <&pclk>; |
| 306 | clock-names = "apb_pclk"; |
| 307 | }; |
| 308 | |
| 309 | serial0: serial@10009000 { |
| 310 | compatible = "arm,pl011", "arm,primecell"; |
| 311 | reg = <0x10009000 0x1000>; |
| 312 | clocks = <&uartclk>, <&pclk>; |
| 313 | clock-names = "uartclk", "apb_pclk"; |
| 314 | }; |
| 315 | |
| 316 | serial1: serial@1000a000 { |
| 317 | compatible = "arm,pl011", "arm,primecell"; |
| 318 | reg = <0x1000a000 0x1000>; |
| 319 | clocks = <&uartclk>, <&pclk>; |
| 320 | clock-names = "uartclk", "apb_pclk"; |
| 321 | }; |
| 322 | |
| 323 | serial2: serial@1000b000 { |
| 324 | compatible = "arm,pl011", "arm,primecell"; |
| 325 | reg = <0x1000b000 0x1000>; |
| 326 | clocks = <&uartclk>, <&pclk>; |
| 327 | clock-names = "uartclk", "apb_pclk"; |
| 328 | }; |
| 329 | |
| 330 | serial3: serial@1000c000 { |
| 331 | compatible = "arm,pl011", "arm,primecell"; |
| 332 | reg = <0x1000c000 0x1000>; |
| 333 | clocks = <&uartclk>, <&pclk>; |
| 334 | clock-names = "uartclk", "apb_pclk"; |
| 335 | }; |
| 336 | |
| 337 | ssp: ssp@1000d000 { |
| 338 | compatible = "arm,pl022", "arm,primecell"; |
| 339 | reg = <0x1000d000 0x1000>; |
| 340 | clocks = <&sspclk>, <&pclk>; |
| 341 | clock-names = "SSPCLK", "apb_pclk"; |
| 342 | }; |
| 343 | |
| 344 | wdog: watchdog@10010000 { |
| 345 | compatible = "arm,sp805", "arm,primecell"; |
| 346 | reg = <0x10010000 0x1000>; |
| 347 | clocks = <&wdogclk>, <&pclk>; |
| 348 | clock-names = "wdogclk", "apb_pclk"; |
| 349 | status = "disabled"; |
| 350 | }; |
| 351 | |
| 352 | timer01: timer@10011000 { |
| 353 | compatible = "arm,sp804", "arm,primecell"; |
| 354 | reg = <0x10011000 0x1000>; |
| 355 | clocks = <&timclk>, <&timclk>, <&pclk>; |
| 356 | clock-names = "timer1", "timer2", "apb_pclk"; |
| 357 | }; |
| 358 | |
| 359 | timer23: timer@10012000 { |
| 360 | compatible = "arm,sp804", "arm,primecell"; |
| 361 | reg = <0x10012000 0x1000>; |
| 362 | clocks = <&timclk>, <&timclk>, <&pclk>; |
| 363 | clock-names = "timer1", "timer2", "apb_pclk"; |
| 364 | }; |
| 365 | |
| 366 | gpio0: gpio@10013000 { |
| 367 | compatible = "arm,pl061", "arm,primecell"; |
| 368 | reg = <0x10013000 0x1000>; |
| 369 | gpio-controller; |
| 370 | #gpio-cells = <2>; |
| 371 | interrupt-controller; |
| 372 | #interrupt-cells = <2>; |
| 373 | clocks = <&pclk>; |
| 374 | clock-names = "apb_pclk"; |
| 375 | }; |
| 376 | |
| 377 | gpio1: gpio@10014000 { |
| 378 | compatible = "arm,pl061", "arm,primecell"; |
| 379 | reg = <0x10014000 0x1000>; |
| 380 | gpio-controller; |
| 381 | #gpio-cells = <2>; |
| 382 | interrupt-controller; |
| 383 | #interrupt-cells = <2>; |
| 384 | clocks = <&pclk>; |
| 385 | clock-names = "apb_pclk"; |
| 386 | }; |
| 387 | |
| 388 | gpio2: gpio@10015000 { |
| 389 | compatible = "arm,pl061", "arm,primecell"; |
| 390 | reg = <0x10015000 0x1000>; |
| 391 | gpio-controller; |
| 392 | #gpio-cells = <2>; |
| 393 | interrupt-controller; |
| 394 | #interrupt-cells = <2>; |
| 395 | clocks = <&pclk>; |
| 396 | clock-names = "apb_pclk"; |
| 397 | }; |
| 398 | |
| 399 | rtc: rtc@10017000 { |
| 400 | compatible = "arm,pl031", "arm,primecell"; |
| 401 | reg = <0x10017000 0x1000>; |
| 402 | clocks = <&pclk>; |
| 403 | clock-names = "apb_pclk"; |
| 404 | }; |
| 405 | |
| 406 | clcd: clcd@10020000 { |
| 407 | compatible = "arm,pl111", "arm,primecell"; |
| 408 | reg = <0x10020000 0x1000>; |
| 409 | interrupt-names = "combined"; |
| 410 | clocks = <&oscclk0>, <&pclk>; |
| 411 | clock-names = "clcdclk", "apb_pclk"; |
| 412 | |
| 413 | port { |
| 414 | clcd_pads: endpoint { |
| 415 | remote-endpoint = <&clcd_panel>; |
| 416 | arm,pl11x,tft-r0g0b0-pads = <0 8 16>; |
| 417 | }; |
| 418 | }; |
| 419 | |
| 420 | panel { |
| 421 | compatible = "panel-dpi"; |
| 422 | |
| 423 | port { |
| 424 | clcd_panel: endpoint { |
| 425 | remote-endpoint = <&clcd_pads>; |
| 426 | }; |
| 427 | }; |
| 428 | |
| 429 | /* Standard 640x480 VGA timings */ |
| 430 | panel-timing { |
| 431 | clock-frequency = <25175000>; |
| 432 | hactive = <640>; |
| 433 | hback-porch = <48>; |
| 434 | hfront-porch = <16>; |
| 435 | hsync-len = <96>; |
| 436 | vactive = <480>; |
| 437 | vback-porch = <33>; |
| 438 | vfront-porch = <10>; |
| 439 | vsync-len = <2>; |
| 440 | }; |
| 441 | }; |
| 442 | }; |
| 443 | }; |
| 444 | }; |