blob: 433f823037dd7a25eceb5a644661aec52d3ea5b7 [file] [log] [blame]
Ira W. Snyderbd358132010-04-07 09:43:00 +02001/*
2 * Janz CMOD-IO MODULbus Carrier Board PCI Driver
3 *
4 * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
5 *
6 * Lots of inspiration and code was copied from drivers/mfd/sm501.c
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 */
13
14#include <linux/kernel.h>
15#include <linux/module.h>
Ira W. Snyderbd358132010-04-07 09:43:00 +020016#include <linux/pci.h>
17#include <linux/interrupt.h>
18#include <linux/delay.h>
19#include <linux/platform_device.h>
David Miller8102bad2010-08-04 22:57:14 -070020#include <linux/slab.h>
Ira W. Snyderbd358132010-04-07 09:43:00 +020021#include <linux/mfd/core.h>
22
23#include <linux/mfd/janz.h>
24
25#define DRV_NAME "janz-cmodio"
26
27/* Size of each MODULbus module in PCI BAR4 */
28#define CMODIO_MODULBUS_SIZE 0x200
29
30/* Maximum number of MODULbus modules on a CMOD-IO carrier board */
31#define CMODIO_MAX_MODULES 4
32
33/* Module Parameters */
34static unsigned int num_modules = CMODIO_MAX_MODULES;
Rusty Russellbafeafe2012-01-13 09:32:16 +103035static char *modules[CMODIO_MAX_MODULES] = {
Ira W. Snyderbd358132010-04-07 09:43:00 +020036 "empty", "empty", "empty", "empty",
37};
38
39module_param_array(modules, charp, &num_modules, S_IRUGO);
40MODULE_PARM_DESC(modules, "MODULbus modules attached to the carrier board");
41
42/* Unique Device Id */
43static unsigned int cmodio_id;
44
45struct cmodio_device {
46 /* Parent PCI device */
47 struct pci_dev *pdev;
48
49 /* PLX control registers */
50 struct janz_cmodio_onboard_regs __iomem *ctrl;
51
52 /* hex switch position */
53 u8 hex;
54
55 /* mfd-core API */
56 struct mfd_cell cells[CMODIO_MAX_MODULES];
57 struct resource resources[3 * CMODIO_MAX_MODULES];
58 struct janz_platform_data pdata[CMODIO_MAX_MODULES];
59};
60
61/*
62 * Subdevices using the mfd-core API
63 */
64
Bill Pembertonf791be42012-11-19 13:23:04 -050065static int cmodio_setup_subdevice(struct cmodio_device *priv,
Ira W. Snyderbd358132010-04-07 09:43:00 +020066 char *name, unsigned int devno,
67 unsigned int modno)
68{
69 struct janz_platform_data *pdata;
70 struct mfd_cell *cell;
71 struct resource *res;
72 struct pci_dev *pci;
73
74 pci = priv->pdev;
75 cell = &priv->cells[devno];
76 res = &priv->resources[devno * 3];
77 pdata = &priv->pdata[devno];
78
79 cell->name = name;
80 cell->resources = res;
81 cell->num_resources = 3;
82
83 /* Setup the subdevice ID -- must be unique */
84 cell->id = cmodio_id++;
85
86 /* Add platform data */
87 pdata->modno = modno;
Samuel Ortiz3d2bdf72011-04-06 16:02:25 +020088 cell->platform_data = pdata;
89 cell->pdata_size = sizeof(*pdata);
Ira W. Snyderbd358132010-04-07 09:43:00 +020090
91 /* MODULbus registers -- PCI BAR3 is big-endian MODULbus access */
92 res->flags = IORESOURCE_MEM;
93 res->parent = &pci->resource[3];
94 res->start = pci->resource[3].start + (CMODIO_MODULBUS_SIZE * modno);
95 res->end = res->start + CMODIO_MODULBUS_SIZE - 1;
96 res++;
97
98 /* PLX Control Registers -- PCI BAR4 is interrupt and other registers */
99 res->flags = IORESOURCE_MEM;
100 res->parent = &pci->resource[4];
101 res->start = pci->resource[4].start;
102 res->end = pci->resource[4].end;
103 res++;
104
105 /*
106 * IRQ
107 *
108 * The start and end fields are used as an offset to the irq_base
109 * parameter passed into the mfd_add_devices() function call. All
110 * devices share the same IRQ.
111 */
112 res->flags = IORESOURCE_IRQ;
113 res->parent = NULL;
114 res->start = 0;
115 res->end = 0;
116 res++;
117
118 return 0;
119}
120
121/* Probe each submodule using kernel parameters */
Bill Pembertonf791be42012-11-19 13:23:04 -0500122static int cmodio_probe_submodules(struct cmodio_device *priv)
Ira W. Snyderbd358132010-04-07 09:43:00 +0200123{
124 struct pci_dev *pdev = priv->pdev;
125 unsigned int num_probed = 0;
126 char *name;
127 int i;
128
129 for (i = 0; i < num_modules; i++) {
130 name = modules[i];
131 if (!strcmp(name, "") || !strcmp(name, "empty"))
132 continue;
133
134 dev_dbg(&priv->pdev->dev, "MODULbus %d: name %s\n", i, name);
135 cmodio_setup_subdevice(priv, name, num_probed, i);
136 num_probed++;
137 }
138
139 /* print an error message if no modules were probed */
140 if (num_probed == 0) {
141 dev_err(&priv->pdev->dev, "no MODULbus modules specified, "
142 "please set the ``modules'' kernel "
143 "parameter according to your "
144 "hardware configuration\n");
145 return -ENODEV;
146 }
147
148 return mfd_add_devices(&pdev->dev, 0, priv->cells,
Mark Brown0848c942012-09-11 15:16:36 +0800149 num_probed, NULL, pdev->irq, NULL);
Ira W. Snyderbd358132010-04-07 09:43:00 +0200150}
151
152/*
153 * SYSFS Attributes
154 */
155
156static ssize_t mbus_show(struct device *dev, struct device_attribute *attr,
157 char *buf)
158{
159 struct cmodio_device *priv = dev_get_drvdata(dev);
160
161 return snprintf(buf, PAGE_SIZE, "%x\n", priv->hex);
162}
163
164static DEVICE_ATTR(modulbus_number, S_IRUGO, mbus_show, NULL);
165
166static struct attribute *cmodio_sysfs_attrs[] = {
167 &dev_attr_modulbus_number.attr,
168 NULL,
169};
170
171static const struct attribute_group cmodio_sysfs_attr_group = {
172 .attrs = cmodio_sysfs_attrs,
173};
174
175/*
176 * PCI Driver
177 */
178
Bill Pembertonf791be42012-11-19 13:23:04 -0500179static int cmodio_pci_probe(struct pci_dev *dev,
Ira W. Snyderbd358132010-04-07 09:43:00 +0200180 const struct pci_device_id *id)
181{
182 struct cmodio_device *priv;
183 int ret;
184
Lee Jonesfa75d4a2013-05-23 16:25:15 +0100185 priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
Ira W. Snyderbd358132010-04-07 09:43:00 +0200186 if (!priv) {
187 dev_err(&dev->dev, "unable to allocate private data\n");
Lee Jonesfa75d4a2013-05-23 16:25:15 +0100188 return -ENOMEM;
Ira W. Snyderbd358132010-04-07 09:43:00 +0200189 }
190
191 pci_set_drvdata(dev, priv);
192 priv->pdev = dev;
193
194 /* Hardware Initialization */
195 ret = pci_enable_device(dev);
196 if (ret) {
197 dev_err(&dev->dev, "unable to enable device\n");
Lee Jonesfa75d4a2013-05-23 16:25:15 +0100198 return ret;
Ira W. Snyderbd358132010-04-07 09:43:00 +0200199 }
200
201 pci_set_master(dev);
202 ret = pci_request_regions(dev, DRV_NAME);
203 if (ret) {
204 dev_err(&dev->dev, "unable to request regions\n");
205 goto out_pci_disable_device;
206 }
207
208 /* Onboard configuration registers */
209 priv->ctrl = pci_ioremap_bar(dev, 4);
210 if (!priv->ctrl) {
211 dev_err(&dev->dev, "unable to remap onboard regs\n");
212 ret = -ENOMEM;
213 goto out_pci_release_regions;
214 }
215
216 /* Read the hex switch on the carrier board */
217 priv->hex = ioread8(&priv->ctrl->int_enable);
218
219 /* Add the MODULbus number (hex switch value) to the device's sysfs */
220 ret = sysfs_create_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
221 if (ret) {
222 dev_err(&dev->dev, "unable to create sysfs attributes\n");
223 goto out_unmap_ctrl;
224 }
225
226 /*
227 * Disable all interrupt lines, each submodule will enable its
228 * own interrupt line if needed
229 */
230 iowrite8(0xf, &priv->ctrl->int_disable);
231
232 /* Register drivers for all submodules */
233 ret = cmodio_probe_submodules(priv);
234 if (ret) {
235 dev_err(&dev->dev, "unable to probe submodules\n");
236 goto out_sysfs_remove_group;
237 }
238
239 return 0;
240
241out_sysfs_remove_group:
242 sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
243out_unmap_ctrl:
244 iounmap(priv->ctrl);
245out_pci_release_regions:
246 pci_release_regions(dev);
247out_pci_disable_device:
248 pci_disable_device(dev);
Lee Jonesfa75d4a2013-05-23 16:25:15 +0100249
Ira W. Snyderbd358132010-04-07 09:43:00 +0200250 return ret;
251}
252
Bill Pemberton4740f732012-11-19 13:26:01 -0500253static void cmodio_pci_remove(struct pci_dev *dev)
Ira W. Snyderbd358132010-04-07 09:43:00 +0200254{
255 struct cmodio_device *priv = pci_get_drvdata(dev);
256
257 mfd_remove_devices(&dev->dev);
258 sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group);
259 iounmap(priv->ctrl);
260 pci_release_regions(dev);
261 pci_disable_device(dev);
Ira W. Snyderbd358132010-04-07 09:43:00 +0200262}
263
264#define PCI_VENDOR_ID_JANZ 0x13c3
265
266/* The list of devices that this module will support */
Jingoo Han36fcd062013-12-03 08:15:39 +0900267static const struct pci_device_id cmodio_pci_ids[] = {
Ira W. Snyderbd358132010-04-07 09:43:00 +0200268 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_JANZ, 0x0101 },
269 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_JANZ, 0x0100 },
270 { 0, }
271};
272MODULE_DEVICE_TABLE(pci, cmodio_pci_ids);
273
274static struct pci_driver cmodio_pci_driver = {
275 .name = DRV_NAME,
276 .id_table = cmodio_pci_ids,
277 .probe = cmodio_pci_probe,
Bill Pemberton84449212012-11-19 13:20:24 -0500278 .remove = cmodio_pci_remove,
Ira W. Snyderbd358132010-04-07 09:43:00 +0200279};
280
Axel Lin38a36f52012-04-03 09:09:19 +0800281module_pci_driver(cmodio_pci_driver);
Ira W. Snyderbd358132010-04-07 09:43:00 +0200282
283MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
284MODULE_DESCRIPTION("Janz CMOD-IO PCI MODULbus Carrier Board Driver");
285MODULE_LICENSE("GPL");