Yaniv Gardi | ca14ab5 | 2015-01-15 16:32:38 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 and |
| 6 | * only version 2 as published by the Free Software Foundation. |
| 7 | * |
| 8 | * This program is distributed in the hope that it will be useful, |
| 9 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 10 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 11 | * GNU General Public License for more details. |
| 12 | * |
| 13 | */ |
| 14 | |
| 15 | #include "phy-qcom-ufs-qmp-14nm.h" |
| 16 | |
| 17 | #define UFS_PHY_NAME "ufs_phy_qmp_14nm" |
| 18 | #define UFS_PHY_VDDA_PHY_UV (925000) |
| 19 | |
| 20 | static |
| 21 | int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, |
| 22 | bool is_rate_B) |
| 23 | { |
| 24 | int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A); |
| 25 | int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); |
| 26 | int err; |
| 27 | |
| 28 | err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A, |
| 29 | tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B); |
| 30 | |
| 31 | if (err) |
| 32 | dev_err(ufs_qcom_phy->dev, |
| 33 | "%s: ufs_qcom_phy_calibrate() failed %d\n", |
| 34 | __func__, err); |
| 35 | return err; |
| 36 | } |
| 37 | |
| 38 | static |
| 39 | void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common) |
| 40 | { |
| 41 | phy_common->quirks = |
| 42 | UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; |
| 43 | } |
| 44 | |
| 45 | static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy) |
| 46 | { |
| 47 | struct ufs_qcom_phy_qmp_14nm *phy = phy_get_drvdata(generic_phy); |
| 48 | struct ufs_qcom_phy *phy_common = &phy->common_cfg; |
| 49 | int err; |
| 50 | |
| 51 | err = ufs_qcom_phy_init_clks(generic_phy, phy_common); |
| 52 | if (err) { |
| 53 | dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n", |
| 54 | __func__, err); |
| 55 | goto out; |
| 56 | } |
| 57 | |
| 58 | err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common); |
| 59 | if (err) { |
| 60 | dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n", |
| 61 | __func__, err); |
| 62 | goto out; |
| 63 | } |
| 64 | phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV; |
| 65 | phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV; |
| 66 | |
| 67 | ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common); |
| 68 | |
| 69 | out: |
| 70 | return err; |
| 71 | } |
| 72 | |
| 73 | static |
| 74 | void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val) |
| 75 | { |
| 76 | writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); |
| 77 | /* |
| 78 | * Before any transactions involving PHY, ensure PHY knows |
| 79 | * that it's analog rail is powered ON (or OFF). |
| 80 | */ |
| 81 | mb(); |
| 82 | } |
| 83 | |
| 84 | static inline |
| 85 | void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) |
| 86 | { |
| 87 | /* |
| 88 | * 14nm PHY does not have TX_LANE_ENABLE register. |
| 89 | * Implement this function so as not to propagate error to caller. |
| 90 | */ |
| 91 | } |
| 92 | |
| 93 | static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy) |
| 94 | { |
| 95 | u32 tmp; |
| 96 | |
| 97 | tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); |
| 98 | tmp &= ~MASK_SERDES_START; |
| 99 | tmp |= (1 << OFFSET_SERDES_START); |
| 100 | writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); |
| 101 | /* Ensure register value is committed */ |
| 102 | mb(); |
| 103 | } |
| 104 | |
| 105 | static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) |
| 106 | { |
| 107 | int err = 0; |
| 108 | u32 val; |
| 109 | |
| 110 | err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, |
| 111 | val, (val & MASK_PCS_READY), 10, 1000000); |
| 112 | if (err) |
| 113 | dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", |
| 114 | __func__, err); |
| 115 | return err; |
| 116 | } |
| 117 | |
Axel Lin | 4a9e5ca | 2015-07-15 15:33:51 +0800 | [diff] [blame] | 118 | static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = { |
Yaniv Gardi | ca14ab5 | 2015-01-15 16:32:38 +0200 | [diff] [blame] | 119 | .init = ufs_qcom_phy_qmp_14nm_init, |
| 120 | .exit = ufs_qcom_phy_exit, |
| 121 | .power_on = ufs_qcom_phy_power_on, |
| 122 | .power_off = ufs_qcom_phy_power_off, |
| 123 | .owner = THIS_MODULE, |
| 124 | }; |
| 125 | |
| 126 | static struct ufs_qcom_phy_specific_ops phy_14nm_ops = { |
| 127 | .calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate, |
| 128 | .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes, |
| 129 | .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready, |
| 130 | .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable, |
| 131 | .power_control = ufs_qcom_phy_qmp_14nm_power_control, |
| 132 | }; |
| 133 | |
| 134 | static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev) |
| 135 | { |
| 136 | struct device *dev = &pdev->dev; |
| 137 | struct phy *generic_phy; |
| 138 | struct ufs_qcom_phy_qmp_14nm *phy; |
| 139 | int err = 0; |
| 140 | |
| 141 | phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); |
| 142 | if (!phy) { |
| 143 | dev_err(dev, "%s: failed to allocate phy\n", __func__); |
| 144 | err = -ENOMEM; |
| 145 | goto out; |
| 146 | } |
| 147 | |
| 148 | generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg, |
| 149 | &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops); |
| 150 | |
| 151 | if (!generic_phy) { |
| 152 | dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n", |
| 153 | __func__); |
| 154 | err = -EIO; |
| 155 | goto out; |
| 156 | } |
| 157 | |
| 158 | phy_set_drvdata(generic_phy, phy); |
| 159 | |
| 160 | strlcpy(phy->common_cfg.name, UFS_PHY_NAME, |
| 161 | sizeof(phy->common_cfg.name)); |
| 162 | |
| 163 | out: |
| 164 | return err; |
| 165 | } |
| 166 | |
| 167 | static int ufs_qcom_phy_qmp_14nm_remove(struct platform_device *pdev) |
| 168 | { |
| 169 | struct device *dev = &pdev->dev; |
| 170 | struct phy *generic_phy = to_phy(dev); |
| 171 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| 172 | int err = 0; |
| 173 | |
| 174 | err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy); |
| 175 | if (err) |
| 176 | dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n", |
| 177 | __func__, err); |
| 178 | |
| 179 | return err; |
| 180 | } |
| 181 | |
| 182 | static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = { |
| 183 | {.compatible = "qcom,ufs-phy-qmp-14nm"}, |
| 184 | {}, |
| 185 | }; |
| 186 | MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match); |
| 187 | |
| 188 | static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = { |
| 189 | .probe = ufs_qcom_phy_qmp_14nm_probe, |
| 190 | .remove = ufs_qcom_phy_qmp_14nm_remove, |
| 191 | .driver = { |
| 192 | .of_match_table = ufs_qcom_phy_qmp_14nm_of_match, |
| 193 | .name = "ufs_qcom_phy_qmp_14nm", |
Yaniv Gardi | ca14ab5 | 2015-01-15 16:32:38 +0200 | [diff] [blame] | 194 | }, |
| 195 | }; |
| 196 | |
| 197 | module_platform_driver(ufs_qcom_phy_qmp_14nm_driver); |
| 198 | |
| 199 | MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm"); |
| 200 | MODULE_LICENSE("GPL v2"); |