blob: 6f7155641591b41c7484b700eb43e174232b5797 [file] [log] [blame]
Scott Liu66aee902014-11-19 17:26:44 -08001/*
2 * Elan Microelectronics touch panels with I2C interface
3 *
4 * Copyright (C) 2014 Elan Microelectronics Corporation.
5 * Scott Liu <scott.liu@emc.com.tw>
6 *
7 * This code is partly based on hid-multitouch.c:
8 *
9 * Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr>
10 * Copyright (c) 2010-2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
11 * Copyright (c) 2010-2012 Ecole Nationale de l'Aviation Civile, France
12 *
13 *
14 * This code is partly based on i2c-hid.c:
15 *
16 * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
17 * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
18 * Copyright (c) 2012 Red Hat, Inc
19 */
20
21/*
22 * This software is licensed under the terms of the GNU General Public
23 * License version 2, as published by the Free Software Foundation, and
24 * may be copied, distributed, and modified under those terms.
25 */
26
27#include <linux/module.h>
28#include <linux/input.h>
29#include <linux/interrupt.h>
30#include <linux/platform_device.h>
31#include <linux/async.h>
32#include <linux/i2c.h>
33#include <linux/delay.h>
34#include <linux/uaccess.h>
35#include <linux/buffer_head.h>
Scott Liu66aee902014-11-19 17:26:44 -080036#include <linux/slab.h>
37#include <linux/firmware.h>
Scott Liu66aee902014-11-19 17:26:44 -080038#include <linux/input/mt.h>
39#include <linux/acpi.h>
40#include <linux/of.h>
Dmitry Torokhovafe10352015-04-16 18:14:55 -070041#include <linux/gpio/consumer.h>
42#include <linux/regulator/consumer.h>
Scott Liu66aee902014-11-19 17:26:44 -080043#include <asm/unaligned.h>
44
45/* Device, Driver information */
46#define DEVICE_NAME "elants_i2c"
47#define DRV_VERSION "1.0.9"
48
49/* Convert from rows or columns into resolution */
50#define ELAN_TS_RESOLUTION(n, m) (((n) - 1) * (m))
51
52/* FW header data */
53#define HEADER_SIZE 4
54#define FW_HDR_TYPE 0
55#define FW_HDR_COUNT 1
56#define FW_HDR_LENGTH 2
57
58/* Buffer mode Queue Header information */
59#define QUEUE_HEADER_SINGLE 0x62
60#define QUEUE_HEADER_NORMAL 0X63
61#define QUEUE_HEADER_WAIT 0x64
62
63/* Command header definition */
64#define CMD_HEADER_WRITE 0x54
65#define CMD_HEADER_READ 0x53
66#define CMD_HEADER_6B_READ 0x5B
67#define CMD_HEADER_RESP 0x52
68#define CMD_HEADER_6B_RESP 0x9B
69#define CMD_HEADER_HELLO 0x55
70#define CMD_HEADER_REK 0x66
71
72/* FW position data */
73#define PACKET_SIZE 55
74#define MAX_CONTACT_NUM 10
75#define FW_POS_HEADER 0
76#define FW_POS_STATE 1
77#define FW_POS_TOTAL 2
78#define FW_POS_XY 3
79#define FW_POS_CHECKSUM 34
80#define FW_POS_WIDTH 35
81#define FW_POS_PRESSURE 45
82
83#define HEADER_REPORT_10_FINGER 0x62
84
85/* Header (4 bytes) plus 3 fill 10-finger packets */
86#define MAX_PACKET_SIZE 169
87
88#define BOOT_TIME_DELAY_MS 50
89
90/* FW read command, 0x53 0x?? 0x0, 0x01 */
91#define E_ELAN_INFO_FW_VER 0x00
92#define E_ELAN_INFO_BC_VER 0x10
93#define E_ELAN_INFO_TEST_VER 0xE0
94#define E_ELAN_INFO_FW_ID 0xF0
95#define E_INFO_OSR 0xD6
96#define E_INFO_PHY_SCAN 0xD7
97#define E_INFO_PHY_DRIVER 0xD8
98
99#define MAX_RETRIES 3
100#define MAX_FW_UPDATE_RETRIES 30
101
102#define ELAN_FW_PAGESIZE 132
Scott Liu66aee902014-11-19 17:26:44 -0800103
104/* calibration timeout definition */
105#define ELAN_CALI_TIMEOUT_MSEC 10000
106
Dmitry Torokhovafe10352015-04-16 18:14:55 -0700107#define ELAN_POWERON_DELAY_USEC 500
108#define ELAN_RESET_DELAY_MSEC 20
109
Scott Liu66aee902014-11-19 17:26:44 -0800110enum elants_state {
111 ELAN_STATE_NORMAL,
112 ELAN_WAIT_QUEUE_HEADER,
113 ELAN_WAIT_RECALIBRATION,
114};
115
116enum elants_iap_mode {
117 ELAN_IAP_OPERATIONAL,
118 ELAN_IAP_RECOVERY,
119};
120
121/* struct elants_data - represents state of Elan touchscreen device */
122struct elants_data {
123 struct i2c_client *client;
124 struct input_dev *input;
125
Dmitry Torokhovafe10352015-04-16 18:14:55 -0700126 struct regulator *vcc33;
127 struct regulator *vccio;
128 struct gpio_desc *reset_gpio;
129
Scott Liu66aee902014-11-19 17:26:44 -0800130 u16 fw_version;
131 u8 test_version;
132 u8 solution_version;
133 u8 bc_version;
134 u8 iap_version;
135 u16 hw_version;
136 unsigned int x_res; /* resolution in units/mm */
137 unsigned int y_res;
138 unsigned int x_max;
139 unsigned int y_max;
140
141 enum elants_state state;
142 enum elants_iap_mode iap_mode;
143
144 /* Guards against concurrent access to the device via sysfs */
145 struct mutex sysfs_mutex;
146
147 u8 cmd_resp[HEADER_SIZE];
148 struct completion cmd_done;
149
150 u8 buf[MAX_PACKET_SIZE];
151
152 bool wake_irq_enabled;
Dmitry Torokhovafe10352015-04-16 18:14:55 -0700153 bool keep_power_in_suspend;
Scott Liu66aee902014-11-19 17:26:44 -0800154};
155
156static int elants_i2c_send(struct i2c_client *client,
157 const void *data, size_t size)
158{
159 int ret;
160
161 ret = i2c_master_send(client, data, size);
162 if (ret == size)
163 return 0;
164
165 if (ret >= 0)
166 ret = -EIO;
167
168 dev_err(&client->dev, "%s failed (%*ph): %d\n",
169 __func__, (int)size, data, ret);
170
171 return ret;
172}
173
174static int elants_i2c_read(struct i2c_client *client, void *data, size_t size)
175{
176 int ret;
177
178 ret = i2c_master_recv(client, data, size);
179 if (ret == size)
180 return 0;
181
182 if (ret >= 0)
183 ret = -EIO;
184
185 dev_err(&client->dev, "%s failed: %d\n", __func__, ret);
186
187 return ret;
188}
189
190static int elants_i2c_execute_command(struct i2c_client *client,
191 const u8 *cmd, size_t cmd_size,
192 u8 *resp, size_t resp_size)
193{
194 struct i2c_msg msgs[2];
195 int ret;
196 u8 expected_response;
197
198 switch (cmd[0]) {
199 case CMD_HEADER_READ:
200 expected_response = CMD_HEADER_RESP;
201 break;
202
203 case CMD_HEADER_6B_READ:
204 expected_response = CMD_HEADER_6B_RESP;
205 break;
206
207 default:
208 dev_err(&client->dev, "%s: invalid command %*ph\n",
209 __func__, (int)cmd_size, cmd);
210 return -EINVAL;
211 }
212
213 msgs[0].addr = client->addr;
214 msgs[0].flags = client->flags & I2C_M_TEN;
215 msgs[0].len = cmd_size;
216 msgs[0].buf = (u8 *)cmd;
217
218 msgs[1].addr = client->addr;
219 msgs[1].flags = client->flags & I2C_M_TEN;
220 msgs[1].flags |= I2C_M_RD;
221 msgs[1].len = resp_size;
222 msgs[1].buf = resp;
223
224 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
225 if (ret < 0)
226 return ret;
227
228 if (ret != ARRAY_SIZE(msgs) || resp[FW_HDR_TYPE] != expected_response)
229 return -EIO;
230
231 return 0;
232}
233
234static int elants_i2c_calibrate(struct elants_data *ts)
235{
236 struct i2c_client *client = ts->client;
237 int ret, error;
238 static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
239 static const u8 rek[] = { 0x54, 0x29, 0x00, 0x01 };
240 static const u8 rek_resp[] = { CMD_HEADER_REK, 0x66, 0x66, 0x66 };
241
242 disable_irq(client->irq);
243
244 ts->state = ELAN_WAIT_RECALIBRATION;
245 reinit_completion(&ts->cmd_done);
246
247 elants_i2c_send(client, w_flashkey, sizeof(w_flashkey));
248 elants_i2c_send(client, rek, sizeof(rek));
249
250 enable_irq(client->irq);
251
252 ret = wait_for_completion_interruptible_timeout(&ts->cmd_done,
253 msecs_to_jiffies(ELAN_CALI_TIMEOUT_MSEC));
254
255 ts->state = ELAN_STATE_NORMAL;
256
257 if (ret <= 0) {
258 error = ret < 0 ? ret : -ETIMEDOUT;
259 dev_err(&client->dev,
260 "error while waiting for calibration to complete: %d\n",
261 error);
262 return error;
263 }
264
265 if (memcmp(rek_resp, ts->cmd_resp, sizeof(rek_resp))) {
266 dev_err(&client->dev,
267 "unexpected calibration response: %*ph\n",
268 (int)sizeof(ts->cmd_resp), ts->cmd_resp);
269 return -EINVAL;
270 }
271
272 return 0;
273}
274
275static int elants_i2c_sw_reset(struct i2c_client *client)
276{
277 const u8 soft_rst_cmd[] = { 0x77, 0x77, 0x77, 0x77 };
278 int error;
279
280 error = elants_i2c_send(client, soft_rst_cmd,
281 sizeof(soft_rst_cmd));
282 if (error) {
283 dev_err(&client->dev, "software reset failed: %d\n", error);
284 return error;
285 }
286
287 /*
288 * We should wait at least 10 msec (but no more than 40) before
289 * sending fastboot or IAP command to the device.
290 */
291 msleep(30);
292
293 return 0;
294}
295
296static u16 elants_i2c_parse_version(u8 *buf)
297{
298 return get_unaligned_be32(buf) >> 4;
299}
300
301static int elants_i2c_query_fw_id(struct elants_data *ts)
302{
303 struct i2c_client *client = ts->client;
304 int error, retry_cnt;
305 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_ID, 0x00, 0x01 };
306 u8 resp[HEADER_SIZE];
307
308 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
309 error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
310 resp, sizeof(resp));
311 if (!error) {
312 ts->hw_version = elants_i2c_parse_version(resp);
313 if (ts->hw_version != 0xffff)
314 return 0;
315 }
316
317 dev_dbg(&client->dev, "read fw id error=%d, buf=%*phC\n",
318 error, (int)sizeof(resp), resp);
319 }
320
321 dev_err(&client->dev,
322 "Failed to read fw id or fw id is invalid\n");
323
324 return -EINVAL;
325}
326
327static int elants_i2c_query_fw_version(struct elants_data *ts)
328{
329 struct i2c_client *client = ts->client;
330 int error, retry_cnt;
331 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_VER, 0x00, 0x01 };
332 u8 resp[HEADER_SIZE];
333
334 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
335 error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
336 resp, sizeof(resp));
337 if (!error) {
338 ts->fw_version = elants_i2c_parse_version(resp);
339 if (ts->fw_version != 0x0000 &&
340 ts->fw_version != 0xffff)
341 return 0;
342 }
343
344 dev_dbg(&client->dev, "read fw version error=%d, buf=%*phC\n",
345 error, (int)sizeof(resp), resp);
346 }
347
348 dev_err(&client->dev,
349 "Failed to read fw version or fw version is invalid\n");
350
351 return -EINVAL;
352}
353
354static int elants_i2c_query_test_version(struct elants_data *ts)
355{
356 struct i2c_client *client = ts->client;
357 int error, retry_cnt;
358 u16 version;
359 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_TEST_VER, 0x00, 0x01 };
360 u8 resp[HEADER_SIZE];
361
362 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
363 error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
364 resp, sizeof(resp));
365 if (!error) {
366 version = elants_i2c_parse_version(resp);
367 ts->test_version = version >> 8;
368 ts->solution_version = version & 0xff;
369
370 return 0;
371 }
372
373 dev_dbg(&client->dev,
374 "read test version error rc=%d, buf=%*phC\n",
375 error, (int)sizeof(resp), resp);
376 }
377
378 dev_err(&client->dev, "Failed to read test version\n");
379
380 return -EINVAL;
381}
382
383static int elants_i2c_query_bc_version(struct elants_data *ts)
384{
385 struct i2c_client *client = ts->client;
386 const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_BC_VER, 0x00, 0x01 };
387 u8 resp[HEADER_SIZE];
388 u16 version;
389 int error;
390
391 error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
392 resp, sizeof(resp));
393 if (error) {
394 dev_err(&client->dev,
395 "read BC version error=%d, buf=%*phC\n",
396 error, (int)sizeof(resp), resp);
397 return error;
398 }
399
400 version = elants_i2c_parse_version(resp);
401 ts->bc_version = version >> 8;
402 ts->iap_version = version & 0xff;
403
404 return 0;
405}
406
407static int elants_i2c_query_ts_info(struct elants_data *ts)
408{
409 struct i2c_client *client = ts->client;
410 int error;
411 u8 resp[17];
412 u16 phy_x, phy_y, rows, cols, osr;
413 const u8 get_resolution_cmd[] = {
414 CMD_HEADER_6B_READ, 0x00, 0x00, 0x00, 0x00, 0x00
415 };
416 const u8 get_osr_cmd[] = {
417 CMD_HEADER_READ, E_INFO_OSR, 0x00, 0x01
418 };
419 const u8 get_physical_scan_cmd[] = {
420 CMD_HEADER_READ, E_INFO_PHY_SCAN, 0x00, 0x01
421 };
422 const u8 get_physical_drive_cmd[] = {
423 CMD_HEADER_READ, E_INFO_PHY_DRIVER, 0x00, 0x01
424 };
425
426 /* Get trace number */
427 error = elants_i2c_execute_command(client,
428 get_resolution_cmd,
429 sizeof(get_resolution_cmd),
430 resp, sizeof(resp));
431 if (error) {
432 dev_err(&client->dev, "get resolution command failed: %d\n",
433 error);
434 return error;
435 }
436
437 rows = resp[2] + resp[6] + resp[10];
438 cols = resp[3] + resp[7] + resp[11];
439
440 /* Process mm_to_pixel information */
441 error = elants_i2c_execute_command(client,
442 get_osr_cmd, sizeof(get_osr_cmd),
443 resp, sizeof(resp));
444 if (error) {
445 dev_err(&client->dev, "get osr command failed: %d\n",
446 error);
447 return error;
448 }
449
450 osr = resp[3];
451
452 error = elants_i2c_execute_command(client,
453 get_physical_scan_cmd,
454 sizeof(get_physical_scan_cmd),
455 resp, sizeof(resp));
456 if (error) {
457 dev_err(&client->dev, "get physical scan command failed: %d\n",
458 error);
459 return error;
460 }
461
462 phy_x = get_unaligned_be16(&resp[2]);
463
464 error = elants_i2c_execute_command(client,
465 get_physical_drive_cmd,
466 sizeof(get_physical_drive_cmd),
467 resp, sizeof(resp));
468 if (error) {
469 dev_err(&client->dev, "get physical drive command failed: %d\n",
470 error);
471 return error;
472 }
473
474 phy_y = get_unaligned_be16(&resp[2]);
475
476 dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y);
477
478 if (rows == 0 || cols == 0 || osr == 0) {
479 dev_warn(&client->dev,
480 "invalid trace number data: %d, %d, %d\n",
481 rows, cols, osr);
482 } else {
483 /* translate trace number to TS resolution */
484 ts->x_max = ELAN_TS_RESOLUTION(rows, osr);
485 ts->x_res = DIV_ROUND_CLOSEST(ts->x_max, phy_x);
486 ts->y_max = ELAN_TS_RESOLUTION(cols, osr);
487 ts->y_res = DIV_ROUND_CLOSEST(ts->y_max, phy_y);
488 }
489
490 return 0;
491}
492
493static int elants_i2c_fastboot(struct i2c_client *client)
494{
495 const u8 boot_cmd[] = { 0x4D, 0x61, 0x69, 0x6E };
496 int error;
497
498 error = elants_i2c_send(client, boot_cmd, sizeof(boot_cmd));
499 if (error) {
500 dev_err(&client->dev, "boot failed: %d\n", error);
501 return error;
502 }
503
504 dev_dbg(&client->dev, "boot success -- 0x%x\n", client->addr);
505 return 0;
506}
507
508static int elants_i2c_initialize(struct elants_data *ts)
509{
510 struct i2c_client *client = ts->client;
511 int error, retry_cnt;
512 const u8 hello_packet[] = { 0x55, 0x55, 0x55, 0x55 };
513 const u8 recov_packet[] = { 0x55, 0x55, 0x80, 0x80 };
514 u8 buf[HEADER_SIZE];
515
516 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
517 error = elants_i2c_sw_reset(client);
518 if (error) {
519 /* Continue initializing if it's the last try */
520 if (retry_cnt < MAX_RETRIES - 1)
521 continue;
522 }
523
524 error = elants_i2c_fastboot(client);
525 if (error) {
526 /* Continue initializing if it's the last try */
527 if (retry_cnt < MAX_RETRIES - 1)
528 continue;
529 }
530
531 /* Wait for Hello packet */
532 msleep(BOOT_TIME_DELAY_MS);
533
534 error = elants_i2c_read(client, buf, sizeof(buf));
535 if (error) {
536 dev_err(&client->dev,
537 "failed to read 'hello' packet: %d\n", error);
538 } else if (!memcmp(buf, hello_packet, sizeof(hello_packet))) {
539 ts->iap_mode = ELAN_IAP_OPERATIONAL;
540 break;
541 } else if (!memcmp(buf, recov_packet, sizeof(recov_packet))) {
542 /*
543 * Setting error code will mark device
544 * in recovery mode below.
545 */
546 error = -EIO;
547 break;
548 } else {
549 error = -EINVAL;
550 dev_err(&client->dev,
551 "invalid 'hello' packet: %*ph\n",
552 (int)sizeof(buf), buf);
553 }
554 }
555
556 if (!error)
557 error = elants_i2c_query_fw_id(ts);
558 if (!error)
559 error = elants_i2c_query_fw_version(ts);
560
561 if (error) {
562 ts->iap_mode = ELAN_IAP_RECOVERY;
563 } else {
564 elants_i2c_query_test_version(ts);
565 elants_i2c_query_bc_version(ts);
566 elants_i2c_query_ts_info(ts);
567 }
568
569 return 0;
570}
571
572/*
573 * Firmware update interface.
574 */
575
576static int elants_i2c_fw_write_page(struct i2c_client *client,
577 const void *page)
578{
579 const u8 ack_ok[] = { 0xaa, 0xaa };
580 u8 buf[2];
581 int retry;
582 int error;
583
584 for (retry = 0; retry < MAX_FW_UPDATE_RETRIES; retry++) {
585 error = elants_i2c_send(client, page, ELAN_FW_PAGESIZE);
586 if (error) {
587 dev_err(&client->dev,
588 "IAP Write Page failed: %d\n", error);
589 continue;
590 }
591
592 error = elants_i2c_read(client, buf, 2);
593 if (error) {
594 dev_err(&client->dev,
595 "IAP Ack read failed: %d\n", error);
596 return error;
597 }
598
599 if (!memcmp(buf, ack_ok, sizeof(ack_ok)))
600 return 0;
601
602 error = -EIO;
603 dev_err(&client->dev,
604 "IAP Get Ack Error [%02x:%02x]\n",
605 buf[0], buf[1]);
606 }
607
608 return error;
609}
610
611static int elants_i2c_do_update_firmware(struct i2c_client *client,
612 const struct firmware *fw,
613 bool force)
614{
615 const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
616 const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
617 const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
James Chen6fd38502015-07-20 11:16:36 -0700618 const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
Scott Liu66aee902014-11-19 17:26:44 -0800619 u8 buf[HEADER_SIZE];
620 u16 send_id;
621 int page, n_fw_pages;
622 int error;
623
624 /* Recovery mode detection! */
625 if (force) {
626 dev_dbg(&client->dev, "Recovery mode procedure\n");
627 error = elants_i2c_send(client, enter_iap2, sizeof(enter_iap2));
628 } else {
629 /* Start IAP Procedure */
630 dev_dbg(&client->dev, "Normal IAP procedure\n");
James Chen6fd38502015-07-20 11:16:36 -0700631 /* Close idle mode */
632 error = elants_i2c_send(client, close_idle, sizeof(close_idle));
633 if (error)
634 dev_err(&client->dev, "Failed close idle: %d\n", error);
635 msleep(60);
Scott Liu66aee902014-11-19 17:26:44 -0800636 elants_i2c_sw_reset(client);
James Chen6fd38502015-07-20 11:16:36 -0700637 msleep(20);
Scott Liu66aee902014-11-19 17:26:44 -0800638 error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
639 }
640
641 if (error) {
642 dev_err(&client->dev, "failed to enter IAP mode: %d\n", error);
643 return error;
644 }
645
646 msleep(20);
647
648 /* check IAP state */
649 error = elants_i2c_read(client, buf, 4);
650 if (error) {
651 dev_err(&client->dev,
652 "failed to read IAP acknowledgement: %d\n",
653 error);
654 return error;
655 }
656
657 if (memcmp(buf, iap_ack, sizeof(iap_ack))) {
658 dev_err(&client->dev,
659 "failed to enter IAP: %*ph (expected %*ph)\n",
660 (int)sizeof(buf), buf, (int)sizeof(iap_ack), iap_ack);
661 return -EIO;
662 }
663
664 dev_info(&client->dev, "successfully entered IAP mode");
665
666 send_id = client->addr;
667 error = elants_i2c_send(client, &send_id, 1);
668 if (error) {
669 dev_err(&client->dev, "sending dummy byte failed: %d\n",
670 error);
671 return error;
672 }
673
674 /* Clear the last page of Master */
675 error = elants_i2c_send(client, fw->data, ELAN_FW_PAGESIZE);
676 if (error) {
677 dev_err(&client->dev, "clearing of the last page failed: %d\n",
678 error);
679 return error;
680 }
681
682 error = elants_i2c_read(client, buf, 2);
683 if (error) {
684 dev_err(&client->dev,
685 "failed to read ACK for clearing the last page: %d\n",
686 error);
687 return error;
688 }
689
690 n_fw_pages = fw->size / ELAN_FW_PAGESIZE;
691 dev_dbg(&client->dev, "IAP Pages = %d\n", n_fw_pages);
692
693 for (page = 0; page < n_fw_pages; page++) {
694 error = elants_i2c_fw_write_page(client,
695 fw->data + page * ELAN_FW_PAGESIZE);
696 if (error) {
697 dev_err(&client->dev,
698 "failed to write FW page %d: %d\n",
699 page, error);
700 return error;
701 }
702 }
703
704 /* Old iap needs to wait 200ms for WDT and rest is for hello packets */
705 msleep(300);
706
707 dev_info(&client->dev, "firmware update completed\n");
708 return 0;
709}
710
711static int elants_i2c_fw_update(struct elants_data *ts)
712{
713 struct i2c_client *client = ts->client;
714 const struct firmware *fw;
Charlie Mooney37dee1a2015-03-10 18:26:18 -0700715 char *fw_name;
Scott Liu66aee902014-11-19 17:26:44 -0800716 int error;
717
Dmitry Torokhov8c0776a2015-04-17 20:42:47 -0700718 fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%04x.bin", ts->hw_version);
Charlie Mooney37dee1a2015-03-10 18:26:18 -0700719 if (!fw_name)
720 return -ENOMEM;
721
722 dev_info(&client->dev, "requesting fw name = %s\n", fw_name);
723 error = request_firmware(&fw, fw_name, &client->dev);
724 kfree(fw_name);
Scott Liu66aee902014-11-19 17:26:44 -0800725 if (error) {
Charlie Mooney37dee1a2015-03-10 18:26:18 -0700726 dev_err(&client->dev, "failed to request firmware: %d\n",
727 error);
Scott Liu66aee902014-11-19 17:26:44 -0800728 return error;
729 }
730
731 if (fw->size % ELAN_FW_PAGESIZE) {
732 dev_err(&client->dev, "invalid firmware length: %zu\n",
733 fw->size);
734 error = -EINVAL;
735 goto out;
736 }
737
738 disable_irq(client->irq);
739
740 error = elants_i2c_do_update_firmware(client, fw,
741 ts->iap_mode == ELAN_IAP_RECOVERY);
742 if (error) {
743 dev_err(&client->dev, "firmware update failed: %d\n", error);
744 ts->iap_mode = ELAN_IAP_RECOVERY;
745 goto out_enable_irq;
746 }
747
748 error = elants_i2c_initialize(ts);
749 if (error) {
750 dev_err(&client->dev,
751 "failed to initialize device after firmware update: %d\n",
752 error);
753 ts->iap_mode = ELAN_IAP_RECOVERY;
754 goto out_enable_irq;
755 }
756
757 ts->iap_mode = ELAN_IAP_OPERATIONAL;
758
759out_enable_irq:
760 ts->state = ELAN_STATE_NORMAL;
761 enable_irq(client->irq);
762 msleep(100);
763
764 if (!error)
765 elants_i2c_calibrate(ts);
766out:
767 release_firmware(fw);
768 return error;
769}
770
771/*
772 * Event reporting.
773 */
774
775static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
776{
777 struct input_dev *input = ts->input;
778 unsigned int n_fingers;
779 u16 finger_state;
780 int i;
781
782 n_fingers = buf[FW_POS_STATE + 1] & 0x0f;
783 finger_state = ((buf[FW_POS_STATE + 1] & 0x30) << 4) |
784 buf[FW_POS_STATE];
785
786 dev_dbg(&ts->client->dev,
787 "n_fingers: %u, state: %04x\n", n_fingers, finger_state);
788
789 for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
790 if (finger_state & 1) {
791 unsigned int x, y, p, w;
792 u8 *pos;
793
794 pos = &buf[FW_POS_XY + i * 3];
795 x = (((u16)pos[0] & 0xf0) << 4) | pos[1];
796 y = (((u16)pos[0] & 0x0f) << 8) | pos[2];
797 p = buf[FW_POS_PRESSURE + i];
798 w = buf[FW_POS_WIDTH + i];
799
800 dev_dbg(&ts->client->dev, "i=%d x=%d y=%d p=%d w=%d\n",
801 i, x, y, p, w);
802
803 input_mt_slot(input, i);
804 input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
805 input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
806 input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
807 input_event(input, EV_ABS, ABS_MT_PRESSURE, p);
808 input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, w);
809
810 n_fingers--;
811 }
812
813 finger_state >>= 1;
814 }
815
816 input_mt_sync_frame(input);
817 input_sync(input);
818}
819
820static u8 elants_i2c_calculate_checksum(u8 *buf)
821{
822 u8 checksum = 0;
823 u8 i;
824
825 for (i = 0; i < FW_POS_CHECKSUM; i++)
826 checksum += buf[i];
827
828 return checksum;
829}
830
831static void elants_i2c_event(struct elants_data *ts, u8 *buf)
832{
833 u8 checksum = elants_i2c_calculate_checksum(buf);
834
835 if (unlikely(buf[FW_POS_CHECKSUM] != checksum))
836 dev_warn(&ts->client->dev,
837 "%s: invalid checksum for packet %02x: %02x vs. %02x\n",
838 __func__, buf[FW_POS_HEADER],
839 checksum, buf[FW_POS_CHECKSUM]);
840 else if (unlikely(buf[FW_POS_HEADER] != HEADER_REPORT_10_FINGER))
841 dev_warn(&ts->client->dev,
842 "%s: unknown packet type: %02x\n",
843 __func__, buf[FW_POS_HEADER]);
844 else
845 elants_i2c_mt_event(ts, buf);
846}
847
848static irqreturn_t elants_i2c_irq(int irq, void *_dev)
849{
850 const u8 wait_packet[] = { 0x64, 0x64, 0x64, 0x64 };
851 struct elants_data *ts = _dev;
852 struct i2c_client *client = ts->client;
853 int report_count, report_len;
854 int i;
855 int len;
856
857 len = i2c_master_recv(client, ts->buf, sizeof(ts->buf));
858 if (len < 0) {
859 dev_err(&client->dev, "%s: failed to read data: %d\n",
860 __func__, len);
861 goto out;
862 }
863
864 dev_dbg(&client->dev, "%s: packet %*ph\n",
865 __func__, HEADER_SIZE, ts->buf);
866
867 switch (ts->state) {
868 case ELAN_WAIT_RECALIBRATION:
869 if (ts->buf[FW_HDR_TYPE] == CMD_HEADER_REK) {
870 memcpy(ts->cmd_resp, ts->buf, sizeof(ts->cmd_resp));
871 complete(&ts->cmd_done);
872 ts->state = ELAN_STATE_NORMAL;
873 }
874 break;
875
876 case ELAN_WAIT_QUEUE_HEADER:
877 if (ts->buf[FW_HDR_TYPE] != QUEUE_HEADER_NORMAL)
878 break;
879
880 ts->state = ELAN_STATE_NORMAL;
881 /* fall through */
882
883 case ELAN_STATE_NORMAL:
884
885 switch (ts->buf[FW_HDR_TYPE]) {
886 case CMD_HEADER_HELLO:
887 case CMD_HEADER_RESP:
888 case CMD_HEADER_REK:
889 break;
890
891 case QUEUE_HEADER_WAIT:
892 if (memcmp(ts->buf, wait_packet, sizeof(wait_packet))) {
893 dev_err(&client->dev,
894 "invalid wait packet %*ph\n",
895 HEADER_SIZE, ts->buf);
896 } else {
897 ts->state = ELAN_WAIT_QUEUE_HEADER;
898 udelay(30);
899 }
900 break;
901
902 case QUEUE_HEADER_SINGLE:
903 elants_i2c_event(ts, &ts->buf[HEADER_SIZE]);
904 break;
905
906 case QUEUE_HEADER_NORMAL:
907 report_count = ts->buf[FW_HDR_COUNT];
908 if (report_count > 3) {
909 dev_err(&client->dev,
910 "too large report count: %*ph\n",
911 HEADER_SIZE, ts->buf);
912 break;
913 }
914
915 report_len = ts->buf[FW_HDR_LENGTH] / report_count;
916 if (report_len != PACKET_SIZE) {
917 dev_err(&client->dev,
918 "mismatching report length: %*ph\n",
919 HEADER_SIZE, ts->buf);
920 break;
921 }
922
923 for (i = 0; i < report_count; i++) {
924 u8 *buf = ts->buf + HEADER_SIZE +
925 i * PACKET_SIZE;
926 elants_i2c_event(ts, buf);
927 }
928 break;
929
930 default:
931 dev_err(&client->dev, "unknown packet %*ph\n",
932 HEADER_SIZE, ts->buf);
933 break;
934 }
935 break;
936 }
937
938out:
939 return IRQ_HANDLED;
940}
941
942/*
943 * sysfs interface
944 */
945static ssize_t calibrate_store(struct device *dev,
946 struct device_attribute *attr,
947 const char *buf, size_t count)
948{
949 struct i2c_client *client = to_i2c_client(dev);
950 struct elants_data *ts = i2c_get_clientdata(client);
951 int error;
952
953 error = mutex_lock_interruptible(&ts->sysfs_mutex);
954 if (error)
955 return error;
956
957 error = elants_i2c_calibrate(ts);
958
959 mutex_unlock(&ts->sysfs_mutex);
960 return error ?: count;
961}
962
963static ssize_t write_update_fw(struct device *dev,
964 struct device_attribute *attr,
965 const char *buf, size_t count)
966{
967 struct i2c_client *client = to_i2c_client(dev);
968 struct elants_data *ts = i2c_get_clientdata(client);
969 int error;
970
971 error = mutex_lock_interruptible(&ts->sysfs_mutex);
972 if (error)
973 return error;
974
975 error = elants_i2c_fw_update(ts);
976 dev_dbg(dev, "firmware update result: %d\n", error);
977
978 mutex_unlock(&ts->sysfs_mutex);
979 return error ?: count;
980}
981
982static ssize_t show_iap_mode(struct device *dev,
983 struct device_attribute *attr, char *buf)
984{
985 struct i2c_client *client = to_i2c_client(dev);
986 struct elants_data *ts = i2c_get_clientdata(client);
987
988 return sprintf(buf, "%s\n",
989 ts->iap_mode == ELAN_IAP_OPERATIONAL ?
990 "Normal" : "Recovery");
991}
992
993static DEVICE_ATTR(calibrate, S_IWUSR, NULL, calibrate_store);
994static DEVICE_ATTR(iap_mode, S_IRUGO, show_iap_mode, NULL);
995static DEVICE_ATTR(update_fw, S_IWUSR, NULL, write_update_fw);
996
997struct elants_version_attribute {
998 struct device_attribute dattr;
999 size_t field_offset;
1000 size_t field_size;
1001};
1002
1003#define __ELANTS_FIELD_SIZE(_field) \
1004 sizeof(((struct elants_data *)NULL)->_field)
1005#define __ELANTS_VERIFY_SIZE(_field) \
1006 (BUILD_BUG_ON_ZERO(__ELANTS_FIELD_SIZE(_field) > 2) + \
1007 __ELANTS_FIELD_SIZE(_field))
1008#define ELANTS_VERSION_ATTR(_field) \
1009 struct elants_version_attribute elants_ver_attr_##_field = { \
1010 .dattr = __ATTR(_field, S_IRUGO, \
1011 elants_version_attribute_show, NULL), \
1012 .field_offset = offsetof(struct elants_data, _field), \
1013 .field_size = __ELANTS_VERIFY_SIZE(_field), \
1014 }
1015
1016static ssize_t elants_version_attribute_show(struct device *dev,
1017 struct device_attribute *dattr,
1018 char *buf)
1019{
1020 struct i2c_client *client = to_i2c_client(dev);
1021 struct elants_data *ts = i2c_get_clientdata(client);
1022 struct elants_version_attribute *attr =
1023 container_of(dattr, struct elants_version_attribute, dattr);
1024 u8 *field = (u8 *)((char *)ts + attr->field_offset);
1025 unsigned int fmt_size;
1026 unsigned int val;
1027
1028 if (attr->field_size == 1) {
1029 val = *field;
1030 fmt_size = 2; /* 2 HEX digits */
1031 } else {
1032 val = *(u16 *)field;
1033 fmt_size = 4; /* 4 HEX digits */
1034 }
1035
1036 return sprintf(buf, "%0*x\n", fmt_size, val);
1037}
1038
1039static ELANTS_VERSION_ATTR(fw_version);
1040static ELANTS_VERSION_ATTR(hw_version);
1041static ELANTS_VERSION_ATTR(test_version);
1042static ELANTS_VERSION_ATTR(solution_version);
1043static ELANTS_VERSION_ATTR(bc_version);
1044static ELANTS_VERSION_ATTR(iap_version);
1045
1046static struct attribute *elants_attributes[] = {
1047 &dev_attr_calibrate.attr,
1048 &dev_attr_update_fw.attr,
1049 &dev_attr_iap_mode.attr,
1050
1051 &elants_ver_attr_fw_version.dattr.attr,
1052 &elants_ver_attr_hw_version.dattr.attr,
1053 &elants_ver_attr_test_version.dattr.attr,
1054 &elants_ver_attr_solution_version.dattr.attr,
1055 &elants_ver_attr_bc_version.dattr.attr,
1056 &elants_ver_attr_iap_version.dattr.attr,
1057 NULL
1058};
1059
1060static struct attribute_group elants_attribute_group = {
1061 .attrs = elants_attributes,
1062};
1063
1064static void elants_i2c_remove_sysfs_group(void *_data)
1065{
1066 struct elants_data *ts = _data;
1067
1068 sysfs_remove_group(&ts->client->dev.kobj, &elants_attribute_group);
1069}
1070
Dmitry Torokhovafe10352015-04-16 18:14:55 -07001071static int elants_i2c_power_on(struct elants_data *ts)
1072{
1073 int error;
1074
1075 /*
1076 * If we do not have reset gpio assume platform firmware
1077 * controls regulators and does power them on for us.
1078 */
1079 if (IS_ERR_OR_NULL(ts->reset_gpio))
1080 return 0;
1081
1082 gpiod_set_value_cansleep(ts->reset_gpio, 1);
1083
1084 error = regulator_enable(ts->vcc33);
1085 if (error) {
1086 dev_err(&ts->client->dev,
1087 "failed to enable vcc33 regulator: %d\n",
1088 error);
1089 goto release_reset_gpio;
1090 }
1091
1092 error = regulator_enable(ts->vccio);
1093 if (error) {
1094 dev_err(&ts->client->dev,
1095 "failed to enable vccio regulator: %d\n",
1096 error);
1097 regulator_disable(ts->vcc33);
1098 goto release_reset_gpio;
1099 }
1100
1101 /*
1102 * We need to wait a bit after powering on controller before
1103 * we are allowed to release reset GPIO.
1104 */
1105 udelay(ELAN_POWERON_DELAY_USEC);
1106
1107release_reset_gpio:
1108 gpiod_set_value_cansleep(ts->reset_gpio, 0);
1109 if (error)
1110 return error;
1111
1112 msleep(ELAN_RESET_DELAY_MSEC);
1113
1114 return 0;
1115}
1116
1117static void elants_i2c_power_off(void *_data)
1118{
1119 struct elants_data *ts = _data;
1120
1121 if (!IS_ERR_OR_NULL(ts->reset_gpio)) {
1122 /*
1123 * Activate reset gpio to prevent leakage through the
1124 * pin once we shut off power to the controller.
1125 */
1126 gpiod_set_value_cansleep(ts->reset_gpio, 1);
1127 regulator_disable(ts->vccio);
1128 regulator_disable(ts->vcc33);
1129 }
1130}
1131
Scott Liu66aee902014-11-19 17:26:44 -08001132static int elants_i2c_probe(struct i2c_client *client,
1133 const struct i2c_device_id *id)
1134{
1135 union i2c_smbus_data dummy;
1136 struct elants_data *ts;
1137 unsigned long irqflags;
1138 int error;
1139
1140 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
1141 dev_err(&client->dev,
1142 "%s: i2c check functionality error\n", DEVICE_NAME);
1143 return -ENXIO;
1144 }
1145
Scott Liu66aee902014-11-19 17:26:44 -08001146 ts = devm_kzalloc(&client->dev, sizeof(struct elants_data), GFP_KERNEL);
1147 if (!ts)
1148 return -ENOMEM;
1149
1150 mutex_init(&ts->sysfs_mutex);
1151 init_completion(&ts->cmd_done);
1152
1153 ts->client = client;
1154 i2c_set_clientdata(client, ts);
1155
Dmitry Torokhovafe10352015-04-16 18:14:55 -07001156 ts->vcc33 = devm_regulator_get(&client->dev, "vcc33");
1157 if (IS_ERR(ts->vcc33)) {
1158 error = PTR_ERR(ts->vcc33);
1159 if (error != -EPROBE_DEFER)
1160 dev_err(&client->dev,
1161 "Failed to get 'vcc33' regulator: %d\n",
1162 error);
1163 return error;
1164 }
1165
1166 ts->vccio = devm_regulator_get(&client->dev, "vccio");
1167 if (IS_ERR(ts->vccio)) {
1168 error = PTR_ERR(ts->vccio);
1169 if (error != -EPROBE_DEFER)
1170 dev_err(&client->dev,
1171 "Failed to get 'vccio' regulator: %d\n",
1172 error);
1173 return error;
1174 }
1175
1176 ts->reset_gpio = devm_gpiod_get(&client->dev, "reset");
1177 if (IS_ERR(ts->reset_gpio)) {
1178 error = PTR_ERR(ts->reset_gpio);
1179
1180 if (error == -EPROBE_DEFER)
1181 return error;
1182
1183 if (error != -ENOENT && error != -ENOSYS) {
1184 dev_err(&client->dev,
1185 "failed to get reset gpio: %d\n",
1186 error);
1187 return error;
1188 }
1189
1190 ts->keep_power_in_suspend = true;
1191 } else {
1192 error = gpiod_direction_output(ts->reset_gpio, 0);
1193 if (error) {
1194 dev_err(&client->dev,
1195 "failed to configure reset gpio as output: %d\n",
1196 error);
1197 return error;
1198 }
1199 }
1200
1201 error = elants_i2c_power_on(ts);
1202 if (error)
1203 return error;
1204
1205 error = devm_add_action(&client->dev, elants_i2c_power_off, ts);
1206 if (error) {
1207 dev_err(&client->dev,
1208 "failed to install power off action: %d\n", error);
1209 elants_i2c_power_off(ts);
1210 return error;
1211 }
1212
1213 /* Make sure there is something at this address */
1214 if (i2c_smbus_xfer(client->adapter, client->addr, 0,
1215 I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) {
1216 dev_err(&client->dev, "nothing at this address\n");
1217 return -ENXIO;
1218 }
1219
Scott Liu66aee902014-11-19 17:26:44 -08001220 error = elants_i2c_initialize(ts);
1221 if (error) {
1222 dev_err(&client->dev, "failed to initialize: %d\n", error);
1223 return error;
1224 }
1225
1226 ts->input = devm_input_allocate_device(&client->dev);
1227 if (!ts->input) {
1228 dev_err(&client->dev, "Failed to allocate input device\n");
1229 return -ENOMEM;
1230 }
1231
1232 ts->input->name = "Elan Touchscreen";
1233 ts->input->id.bustype = BUS_I2C;
1234
1235 __set_bit(BTN_TOUCH, ts->input->keybit);
1236 __set_bit(EV_ABS, ts->input->evbit);
1237 __set_bit(EV_KEY, ts->input->evbit);
1238
1239 /* Single touch input params setup */
1240 input_set_abs_params(ts->input, ABS_X, 0, ts->x_max, 0, 0);
1241 input_set_abs_params(ts->input, ABS_Y, 0, ts->y_max, 0, 0);
1242 input_set_abs_params(ts->input, ABS_PRESSURE, 0, 255, 0, 0);
1243 input_abs_set_res(ts->input, ABS_X, ts->x_res);
1244 input_abs_set_res(ts->input, ABS_Y, ts->y_res);
1245
1246 /* Multitouch input params setup */
1247 error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM,
1248 INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
1249 if (error) {
1250 dev_err(&client->dev,
1251 "failed to initialize MT slots: %d\n", error);
1252 return error;
1253 }
1254
1255 input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0);
1256 input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
1257 input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
1258 input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
1259 input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
1260 input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
1261
1262 input_set_drvdata(ts->input, ts);
1263
1264 error = input_register_device(ts->input);
1265 if (error) {
1266 dev_err(&client->dev,
1267 "unable to register input device: %d\n", error);
1268 return error;
1269 }
1270
1271 /*
1272 * Systems using device tree should set up interrupt via DTS,
1273 * the rest will use the default falling edge interrupts.
1274 */
1275 irqflags = client->dev.of_node ? 0 : IRQF_TRIGGER_FALLING;
1276
1277 error = devm_request_threaded_irq(&client->dev, client->irq,
1278 NULL, elants_i2c_irq,
1279 irqflags | IRQF_ONESHOT,
1280 client->name, ts);
1281 if (error) {
1282 dev_err(&client->dev, "Failed to register interrupt\n");
1283 return error;
1284 }
1285
1286 /*
1287 * Systems using device tree should set up wakeup via DTS,
1288 * the rest will configure device as wakeup source by default.
1289 */
1290 if (!client->dev.of_node)
1291 device_init_wakeup(&client->dev, true);
1292
1293 error = sysfs_create_group(&client->dev.kobj, &elants_attribute_group);
1294 if (error) {
1295 dev_err(&client->dev, "failed to create sysfs attributes: %d\n",
1296 error);
1297 return error;
1298 }
1299
1300 error = devm_add_action(&client->dev,
1301 elants_i2c_remove_sysfs_group, ts);
1302 if (error) {
1303 elants_i2c_remove_sysfs_group(ts);
1304 dev_err(&client->dev,
1305 "Failed to add sysfs cleanup action: %d\n",
1306 error);
1307 return error;
1308 }
1309
1310 return 0;
1311}
1312
1313static int __maybe_unused elants_i2c_suspend(struct device *dev)
1314{
1315 struct i2c_client *client = to_i2c_client(dev);
1316 struct elants_data *ts = i2c_get_clientdata(client);
1317 const u8 set_sleep_cmd[] = { 0x54, 0x50, 0x00, 0x01 };
1318 int retry_cnt;
1319 int error;
1320
1321 /* Command not support in IAP recovery mode */
1322 if (ts->iap_mode != ELAN_IAP_OPERATIONAL)
1323 return -EBUSY;
1324
1325 disable_irq(client->irq);
1326
Dmitry Torokhovafe10352015-04-16 18:14:55 -07001327 if (device_may_wakeup(dev) || ts->keep_power_in_suspend) {
1328 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
1329 error = elants_i2c_send(client, set_sleep_cmd,
1330 sizeof(set_sleep_cmd));
1331 if (!error)
1332 break;
Scott Liu66aee902014-11-19 17:26:44 -08001333
Dmitry Torokhovafe10352015-04-16 18:14:55 -07001334 dev_err(&client->dev,
1335 "suspend command failed: %d\n", error);
1336 }
1337
1338 if (device_may_wakeup(dev))
1339 ts->wake_irq_enabled =
1340 (enable_irq_wake(client->irq) == 0);
1341 } else {
1342 elants_i2c_power_off(ts);
Scott Liu66aee902014-11-19 17:26:44 -08001343 }
1344
Scott Liu66aee902014-11-19 17:26:44 -08001345 return 0;
1346}
1347
1348static int __maybe_unused elants_i2c_resume(struct device *dev)
1349{
1350 struct i2c_client *client = to_i2c_client(dev);
1351 struct elants_data *ts = i2c_get_clientdata(client);
1352 const u8 set_active_cmd[] = { 0x54, 0x58, 0x00, 0x01 };
1353 int retry_cnt;
1354 int error;
1355
1356 if (device_may_wakeup(dev) && ts->wake_irq_enabled)
1357 disable_irq_wake(client->irq);
1358
Dmitry Torokhovafe10352015-04-16 18:14:55 -07001359 if (ts->keep_power_in_suspend) {
1360 for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
1361 error = elants_i2c_send(client, set_active_cmd,
1362 sizeof(set_active_cmd));
1363 if (!error)
1364 break;
Scott Liu66aee902014-11-19 17:26:44 -08001365
Dmitry Torokhovafe10352015-04-16 18:14:55 -07001366 dev_err(&client->dev,
1367 "resume command failed: %d\n", error);
1368 }
1369 } else {
1370 elants_i2c_power_on(ts);
1371 elants_i2c_initialize(ts);
Scott Liu66aee902014-11-19 17:26:44 -08001372 }
1373
1374 ts->state = ELAN_STATE_NORMAL;
1375 enable_irq(client->irq);
1376
1377 return 0;
1378}
1379
1380static SIMPLE_DEV_PM_OPS(elants_i2c_pm_ops,
1381 elants_i2c_suspend, elants_i2c_resume);
1382
1383static const struct i2c_device_id elants_i2c_id[] = {
1384 { DEVICE_NAME, 0 },
1385 { }
1386};
1387MODULE_DEVICE_TABLE(i2c, elants_i2c_id);
1388
1389#ifdef CONFIG_ACPI
1390static const struct acpi_device_id elants_acpi_id[] = {
1391 { "ELAN0001", 0 },
1392 { }
1393};
1394MODULE_DEVICE_TABLE(acpi, elants_acpi_id);
1395#endif
1396
1397#ifdef CONFIG_OF
1398static const struct of_device_id elants_of_match[] = {
1399 { .compatible = "elan,ekth3500" },
1400 { /* sentinel */ }
1401};
1402MODULE_DEVICE_TABLE(of, elants_of_match);
1403#endif
1404
1405static struct i2c_driver elants_i2c_driver = {
1406 .probe = elants_i2c_probe,
1407 .id_table = elants_i2c_id,
1408 .driver = {
1409 .name = DEVICE_NAME,
Scott Liu66aee902014-11-19 17:26:44 -08001410 .pm = &elants_i2c_pm_ops,
1411 .acpi_match_table = ACPI_PTR(elants_acpi_id),
1412 .of_match_table = of_match_ptr(elants_of_match),
Dmitry Torokhov9f6a07b2015-04-14 18:18:34 -07001413 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
Scott Liu66aee902014-11-19 17:26:44 -08001414 },
1415};
1416module_i2c_driver(elants_i2c_driver);
1417
1418MODULE_AUTHOR("Scott Liu <scott.liu@emc.com.tw>");
1419MODULE_DESCRIPTION("Elan I2c Touchscreen driver");
1420MODULE_VERSION(DRV_VERSION);
1421MODULE_LICENSE("GPL");