blob: d42f89b7760bf2c537d3f4769bbc53715af7b6b5 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/arch/arm/boot/compressed/head.S
3 *
4 * Copyright (C) 1996-2002 Russell King
Hyok S. Choi10c2df62006-03-27 10:21:34 +01005 * Copyright (C) 2004 Hyok S. Choi (MPU support)
Linus Torvalds1da177e2005-04-16 15:20:36 -07006 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070011#include <linux/linkage.h>
12
13/*
14 * Debugging stuff
15 *
16 * Note that these macros must not contain any code which is not
17 * 100% relocatable. Any attempt to do so will result in a crash.
18 * Please select one of the following when turning on debugging.
19 */
20#ifdef DEBUG
Russell King5cd0c3442005-05-03 12:18:46 +010021
Russell King5cd0c3442005-05-03 12:18:46 +010022#if defined(CONFIG_DEBUG_ICEDCC)
Tony Lindgren7d95ded2006-09-20 13:03:34 +010023
24#ifdef CONFIG_CPU_V6
25 .macro loadsp, rb
26 .endm
27 .macro writeb, ch, rb
28 mcr p14, 0, \ch, c0, c5, 0
29 .endm
30#else
Linus Torvalds1da177e2005-04-16 15:20:36 -070031 .macro loadsp, rb
32 .endm
Russell King224b5be2005-11-16 14:59:51 +000033 .macro writeb, ch, rb
Uwe Kleine-König41a9e682007-12-13 09:31:34 +010034 mcr p14, 0, \ch, c1, c0, 0
Linus Torvalds1da177e2005-04-16 15:20:36 -070035 .endm
Tony Lindgren7d95ded2006-09-20 13:03:34 +010036#endif
37
Russell King5cd0c3442005-05-03 12:18:46 +010038#else
Russell King224b5be2005-11-16 14:59:51 +000039
Russell Kinga09e64f2008-08-05 16:14:15 +010040#include <mach/debug-macro.S>
Russell King224b5be2005-11-16 14:59:51 +000041
Russell King5cd0c3442005-05-03 12:18:46 +010042 .macro writeb, ch, rb
43 senduart \ch, \rb
44 .endm
45
Russell King224b5be2005-11-16 14:59:51 +000046#if defined(CONFIG_ARCH_SA1100)
Linus Torvalds1da177e2005-04-16 15:20:36 -070047 .macro loadsp, rb
48 mov \rb, #0x80000000 @ physical base address
Russell King224b5be2005-11-16 14:59:51 +000049#ifdef CONFIG_DEBUG_LL_SER3
Linus Torvalds1da177e2005-04-16 15:20:36 -070050 add \rb, \rb, #0x00050000 @ Ser3
Russell King224b5be2005-11-16 14:59:51 +000051#else
Linus Torvalds1da177e2005-04-16 15:20:36 -070052 add \rb, \rb, #0x00010000 @ Ser1
Russell King224b5be2005-11-16 14:59:51 +000053#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -070054 .endm
Linus Torvalds1da177e2005-04-16 15:20:36 -070055#elif defined(CONFIG_ARCH_S3C2410)
Russell King5cd0c3442005-05-03 12:18:46 +010056 .macro loadsp, rb
Linus Torvalds1da177e2005-04-16 15:20:36 -070057 mov \rb, #0x50000000
Ben Dooksc7657842007-07-22 16:11:20 +010058 add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
Linus Torvalds1da177e2005-04-16 15:20:36 -070059 .endm
Linus Torvalds1da177e2005-04-16 15:20:36 -070060#else
Russell King224b5be2005-11-16 14:59:51 +000061 .macro loadsp, rb
62 addruart \rb
63 .endm
Linus Torvalds1da177e2005-04-16 15:20:36 -070064#endif
65#endif
Russell King5cd0c3442005-05-03 12:18:46 +010066#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -070067
68 .macro kputc,val
69 mov r0, \val
70 bl putc
71 .endm
72
73 .macro kphex,val,len
74 mov r0, \val
75 mov r1, #\len
76 bl phex
77 .endm
78
79 .macro debug_reloc_start
80#ifdef DEBUG
81 kputc #'\n'
82 kphex r6, 8 /* processor id */
83 kputc #':'
84 kphex r7, 8 /* architecture id */
Hyok S. Choif12d0d72006-09-26 17:36:37 +090085#ifdef CONFIG_CPU_CP15
Linus Torvalds1da177e2005-04-16 15:20:36 -070086 kputc #':'
87 mrc p15, 0, r0, c1, c0
88 kphex r0, 8 /* control reg */
Hyok S. Choif12d0d72006-09-26 17:36:37 +090089#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -070090 kputc #'\n'
91 kphex r5, 8 /* decompressed kernel start */
92 kputc #'-'
Russell Kingf4619022006-01-12 17:17:57 +000093 kphex r9, 8 /* decompressed kernel end */
Linus Torvalds1da177e2005-04-16 15:20:36 -070094 kputc #'>'
95 kphex r4, 8 /* kernel execution address */
96 kputc #'\n'
97#endif
98 .endm
99
100 .macro debug_reloc_end
101#ifdef DEBUG
102 kphex r5, 8 /* end of kernel */
103 kputc #'\n'
104 mov r0, r4
105 bl memdump /* dump 256 bytes at start of kernel */
106#endif
107 .endm
108
109 .section ".start", #alloc, #execinstr
110/*
111 * sort out different calling conventions
112 */
113 .align
114start:
115 .type start,#function
116 .rept 8
117 mov r0, r0
118 .endr
119
120 b 1f
121 .word 0x016f2818 @ Magic numbers to help the loader
122 .word start @ absolute load/run zImage address
123 .word _edata @ zImage end address
1241: mov r7, r1 @ save architecture ID
Russell Kingf4619022006-01-12 17:17:57 +0000125 mov r8, r2 @ save atags pointer
Linus Torvalds1da177e2005-04-16 15:20:36 -0700126
127#ifndef __ARM_ARCH_2__
128 /*
129 * Booting from Angel - need to enter SVC mode and disable
130 * FIQs/IRQs (numeric definitions from angel arm.h source).
131 * We only do this if we were in user mode on entry.
132 */
133 mrs r2, cpsr @ get current mode
134 tst r2, #3 @ not user?
135 bne not_angel
136 mov r0, #0x17 @ angel_SWIreason_EnterSVC
137 swi 0x123456 @ angel_SWI_ARM
138not_angel:
139 mrs r2, cpsr @ turn off interrupts to
140 orr r2, r2, #0xc0 @ prevent angel from running
141 msr cpsr_c, r2
142#else
143 teqp pc, #0x0c000003 @ turn off interrupts
144#endif
145
146 /*
147 * Note that some cache flushing and other stuff may
148 * be needed here - is there an Angel SWI call for this?
149 */
150
151 /*
152 * some architecture specific code can be inserted
Russell Kingf4619022006-01-12 17:17:57 +0000153 * by the linker here, but it should preserve r7, r8, and r9.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154 */
155
156 .text
157 adr r0, LC0
158 ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp}
159 subs r0, r0, r1 @ calculate the delta offset
160
161 @ if delta is zero, we are
162 beq not_relocated @ running at the address we
163 @ were linked at.
164
165 /*
166 * We're running at a different address. We need to fix
167 * up various pointers:
168 * r5 - zImage base address
169 * r6 - GOT start
170 * ip - GOT end
171 */
172 add r5, r5, r0
173 add r6, r6, r0
174 add ip, ip, r0
175
176#ifndef CONFIG_ZBOOT_ROM
177 /*
178 * If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
179 * we need to fix up pointers into the BSS region.
180 * r2 - BSS start
181 * r3 - BSS end
182 * sp - stack pointer
183 */
184 add r2, r2, r0
185 add r3, r3, r0
186 add sp, sp, r0
187
188 /*
189 * Relocate all entries in the GOT table.
190 */
1911: ldr r1, [r6, #0] @ relocate entries in the GOT
192 add r1, r1, r0 @ table. This fixes up the
193 str r1, [r6], #4 @ C references.
194 cmp r6, ip
195 blo 1b
196#else
197
198 /*
199 * Relocate entries in the GOT table. We only relocate
200 * the entries that are outside the (relocated) BSS region.
201 */
2021: ldr r1, [r6, #0] @ relocate entries in the GOT
203 cmp r1, r2 @ entry < bss_start ||
204 cmphs r3, r1 @ _end < entry
205 addlo r1, r1, r0 @ table. This fixes up the
206 str r1, [r6], #4 @ C references.
207 cmp r6, ip
208 blo 1b
209#endif
210
211not_relocated: mov r0, #0
2121: str r0, [r2], #4 @ clear bss
213 str r0, [r2], #4
214 str r0, [r2], #4
215 str r0, [r2], #4
216 cmp r2, r3
217 blo 1b
218
219 /*
220 * The C runtime environment should now be setup
221 * sufficiently. Turn the cache on, set up some
222 * pointers, and start decompressing.
223 */
224 bl cache_on
225
226 mov r1, sp @ malloc space above stack
227 add r2, sp, #0x10000 @ 64k max
228
229/*
230 * Check to see if we will overwrite ourselves.
231 * r4 = final kernel address
232 * r5 = start of this image
233 * r2 = end of malloc space (and therefore this image)
234 * We basically want:
235 * r4 >= r2 -> OK
236 * r4 + image length <= r5 -> OK
237 */
238 cmp r4, r2
239 bhs wont_overwrite
Lennert Buytenhek2552fc22006-09-29 21:14:05 +0100240 sub r3, sp, r5 @ > compressed kernel size
241 add r0, r4, r3, lsl #2 @ allow for 4x expansion
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242 cmp r0, r5
243 bls wont_overwrite
244
245 mov r5, r2 @ decompress after malloc space
246 mov r0, r5
247 mov r3, r7
248 bl decompress_kernel
249
Catalin Marinasc7341d42007-06-01 17:13:59 +0100250 add r0, r0, #127 + 128 @ alignment + stack
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251 bic r0, r0, #127 @ align the kernel length
252/*
253 * r0 = decompressed kernel length
254 * r1-r3 = unused
255 * r4 = kernel execution address
256 * r5 = decompressed kernel start
257 * r6 = processor ID
258 * r7 = architecture ID
Russell Kingf4619022006-01-12 17:17:57 +0000259 * r8 = atags pointer
260 * r9-r14 = corrupted
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261 */
262 add r1, r5, r0 @ end of decompressed kernel
263 adr r2, reloc_start
264 ldr r3, LC1
265 add r3, r2, r3
Russell Kingf4619022006-01-12 17:17:57 +00002661: ldmia r2!, {r9 - r14} @ copy relocation code
267 stmia r1!, {r9 - r14}
268 ldmia r2!, {r9 - r14}
269 stmia r1!, {r9 - r14}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270 cmp r2, r3
271 blo 1b
Catalin Marinasc7341d42007-06-01 17:13:59 +0100272 add sp, r1, #128 @ relocate the stack
Linus Torvalds1da177e2005-04-16 15:20:36 -0700273
274 bl cache_clean_flush
275 add pc, r5, r0 @ call relocation code
276
277/*
278 * We're not in danger of overwriting ourselves. Do this the simple way.
279 *
280 * r4 = kernel execution address
281 * r7 = architecture ID
282 */
283wont_overwrite: mov r0, r4
284 mov r3, r7
285 bl decompress_kernel
286 b call_kernel
287
288 .type LC0, #object
289LC0: .word LC0 @ r1
290 .word __bss_start @ r2
291 .word _end @ r3
292 .word zreladdr @ r4
293 .word _start @ r5
294 .word _got_start @ r6
295 .word _got_end @ ip
296 .word user_stack+4096 @ sp
297LC1: .word reloc_end - reloc_start
298 .size LC0, . - LC0
299
300#ifdef CONFIG_ARCH_RPC
301 .globl params
302params: ldr r0, =params_phys
303 mov pc, lr
304 .ltorg
305 .align
306#endif
307
308/*
309 * Turn on the cache. We need to setup some page tables so that we
310 * can have both the I and D caches on.
311 *
312 * We place the page tables 16k down from the kernel execution address,
313 * and we hope that nothing else is using it. If we're using it, we
314 * will go pop!
315 *
316 * On entry,
317 * r4 = kernel execution address
318 * r6 = processor ID
319 * r7 = architecture number
Russell Kingf4619022006-01-12 17:17:57 +0000320 * r8 = atags pointer
321 * r9 = run-time address of "start" (???)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700322 * On exit,
Russell Kingf4619022006-01-12 17:17:57 +0000323 * r1, r2, r3, r9, r10, r12 corrupted
Linus Torvalds1da177e2005-04-16 15:20:36 -0700324 * This routine must preserve:
Russell Kingf4619022006-01-12 17:17:57 +0000325 * r4, r5, r6, r7, r8
Linus Torvalds1da177e2005-04-16 15:20:36 -0700326 */
327 .align 5
328cache_on: mov r3, #8 @ cache_on function
329 b call_cache_fn
330
Hyok S. Choi10c2df62006-03-27 10:21:34 +0100331/*
332 * Initialize the highest priority protection region, PR7
333 * to cover all 32bit address and cacheable and bufferable.
334 */
335__armv4_mpu_cache_on:
336 mov r0, #0x3f @ 4G, the whole
337 mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
338 mcr p15, 0, r0, c6, c7, 1
339
340 mov r0, #0x80 @ PR7
341 mcr p15, 0, r0, c2, c0, 0 @ D-cache on
342 mcr p15, 0, r0, c2, c0, 1 @ I-cache on
343 mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
344
345 mov r0, #0xc000
346 mcr p15, 0, r0, c5, c0, 1 @ I-access permission
347 mcr p15, 0, r0, c5, c0, 0 @ D-access permission
348
349 mov r0, #0
350 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
351 mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
352 mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
353 mrc p15, 0, r0, c1, c0, 0 @ read control reg
354 @ ...I .... ..D. WC.M
355 orr r0, r0, #0x002d @ .... .... ..1. 11.1
356 orr r0, r0, #0x1000 @ ...1 .... .... ....
357
358 mcr p15, 0, r0, c1, c0, 0 @ write control reg
359
360 mov r0, #0
361 mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
362 mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
363 mov pc, lr
364
365__armv3_mpu_cache_on:
366 mov r0, #0x3f @ 4G, the whole
367 mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
368
369 mov r0, #0x80 @ PR7
370 mcr p15, 0, r0, c2, c0, 0 @ cache on
371 mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
372
373 mov r0, #0xc000
374 mcr p15, 0, r0, c5, c0, 0 @ access permission
375
376 mov r0, #0
377 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
378 mrc p15, 0, r0, c1, c0, 0 @ read control reg
379 @ .... .... .... WC.M
380 orr r0, r0, #0x000d @ .... .... .... 11.1
381 mov r0, #0
382 mcr p15, 0, r0, c1, c0, 0 @ write control reg
383
384 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
385 mov pc, lr
386
Linus Torvalds1da177e2005-04-16 15:20:36 -0700387__setup_mmu: sub r3, r4, #16384 @ Page directory size
388 bic r3, r3, #0xff @ Align the pointer
389 bic r3, r3, #0x3f00
390/*
391 * Initialise the page tables, turning on the cacheable and bufferable
392 * bits for the RAM area only.
393 */
394 mov r0, r3
Russell Kingf4619022006-01-12 17:17:57 +0000395 mov r9, r0, lsr #18
396 mov r9, r9, lsl #18 @ start of RAM
397 add r10, r9, #0x10000000 @ a reasonable RAM size
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398 mov r1, #0x12
399 orr r1, r1, #3 << 10
400 add r2, r3, #16384
Nicolas Pitre265d5e42006-01-18 22:38:51 +00004011: cmp r1, r9 @ if virt > start of RAM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700402 orrhs r1, r1, #0x0c @ set cacheable, bufferable
Russell Kingf4619022006-01-12 17:17:57 +0000403 cmp r1, r10 @ if virt > end of RAM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700404 bichs r1, r1, #0x0c @ clear cacheable, bufferable
405 str r1, [r0], #4 @ 1:1 mapping
406 add r1, r1, #1048576
407 teq r0, r2
408 bne 1b
409/*
410 * If ever we are running from Flash, then we surely want the cache
411 * to be enabled also for our execution instance... We map 2MB of it
412 * so there is no map overlap problem for up to 1 MB compressed kernel.
413 * If the execution is in RAM then we would only be duplicating the above.
414 */
415 mov r1, #0x1e
416 orr r1, r1, #3 << 10
417 mov r2, pc, lsr #20
418 orr r1, r1, r2, lsl #20
419 add r0, r3, r2, lsl #2
420 str r1, [r0], #4
421 add r1, r1, #1048576
422 str r1, [r0]
423 mov pc, lr
424
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000425__armv4_mmu_cache_on:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426 mov r12, lr
427 bl __setup_mmu
428 mov r0, #0
429 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
430 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
431 mrc p15, 0, r0, c1, c0, 0 @ read control reg
432 orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
433 orr r0, r0, #0x0030
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000434 bl __common_mmu_cache_on
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435 mov r0, #0
436 mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
437 mov pc, r12
438
Catalin Marinas7d09e852007-06-01 17:14:53 +0100439__armv7_mmu_cache_on:
440 mov r12, lr
441 mrc p15, 0, r11, c0, c1, 4 @ read ID_MMFR0
442 tst r11, #0xf @ VMSA
443 blne __setup_mmu
444 mov r0, #0
445 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
446 tst r11, #0xf @ VMSA
447 mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
448 mrc p15, 0, r0, c1, c0, 0 @ read control reg
449 orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
450 orr r0, r0, #0x003c @ write buffer
451 orrne r0, r0, #1 @ MMU enabled
452 movne r1, #-1
453 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
454 mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
455 mcr p15, 0, r0, c1, c0, 0 @ load control register
456 mrc p15, 0, r0, c1, c0, 0 @ and read it back
457 mov r0, #0
458 mcr p15, 0, r0, c7, c5, 4 @ ISB
459 mov pc, r12
460
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000461__arm6_mmu_cache_on:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700462 mov r12, lr
463 bl __setup_mmu
464 mov r0, #0
465 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
466 mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
467 mov r0, #0x30
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000468 bl __common_mmu_cache_on
Linus Torvalds1da177e2005-04-16 15:20:36 -0700469 mov r0, #0
470 mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
471 mov pc, r12
472
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000473__common_mmu_cache_on:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700474#ifndef DEBUG
475 orr r0, r0, #0x000d @ Write buffer, mmu
476#endif
477 mov r1, #-1
478 mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
479 mcr p15, 0, r1, c3, c0, 0 @ load domain access control
Nicolas Pitre2dc76672006-07-01 21:29:32 +0100480 b 1f
481 .align 5 @ cache line aligned
4821: mcr p15, 0, r0, c1, c0, 0 @ load control register
483 mrc p15, 0, r0, c1, c0, 0 @ and read it back to
484 sub pc, lr, r0, lsr #32 @ properly flush pipeline
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485
486/*
487 * All code following this line is relocatable. It is relocated by
488 * the above code to the end of the decompressed kernel image and
489 * executed there. During this time, we have no stacks.
490 *
491 * r0 = decompressed kernel length
492 * r1-r3 = unused
493 * r4 = kernel execution address
494 * r5 = decompressed kernel start
495 * r6 = processor ID
496 * r7 = architecture ID
Russell Kingf4619022006-01-12 17:17:57 +0000497 * r8 = atags pointer
498 * r9-r14 = corrupted
Linus Torvalds1da177e2005-04-16 15:20:36 -0700499 */
500 .align 5
Russell Kingf4619022006-01-12 17:17:57 +0000501reloc_start: add r9, r5, r0
Catalin Marinasc7341d42007-06-01 17:13:59 +0100502 sub r9, r9, #128 @ do not copy the stack
Linus Torvalds1da177e2005-04-16 15:20:36 -0700503 debug_reloc_start
504 mov r1, r4
5051:
506 .rept 4
Russell Kingf4619022006-01-12 17:17:57 +0000507 ldmia r5!, {r0, r2, r3, r10 - r14} @ relocate kernel
508 stmia r1!, {r0, r2, r3, r10 - r14}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700509 .endr
510
Russell Kingf4619022006-01-12 17:17:57 +0000511 cmp r5, r9
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512 blo 1b
Catalin Marinasc7341d42007-06-01 17:13:59 +0100513 add sp, r1, #128 @ relocate the stack
Linus Torvalds1da177e2005-04-16 15:20:36 -0700514 debug_reloc_end
515
516call_kernel: bl cache_clean_flush
517 bl cache_off
Russell Kingf4619022006-01-12 17:17:57 +0000518 mov r0, #0 @ must be zero
Linus Torvalds1da177e2005-04-16 15:20:36 -0700519 mov r1, r7 @ restore architecture number
Russell Kingf4619022006-01-12 17:17:57 +0000520 mov r2, r8 @ restore atags pointer
Linus Torvalds1da177e2005-04-16 15:20:36 -0700521 mov pc, r4 @ call kernel
522
523/*
524 * Here follow the relocatable cache support functions for the
525 * various processors. This is a generic hook for locating an
526 * entry and jumping to an instruction at the specified offset
527 * from the start of the block. Please note this is all position
528 * independent code.
529 *
530 * r1 = corrupted
531 * r2 = corrupted
532 * r3 = block offset
533 * r6 = corrupted
534 * r12 = corrupted
535 */
536
537call_cache_fn: adr r12, proc_types
Hyok S. Choif12d0d72006-09-26 17:36:37 +0900538#ifdef CONFIG_CPU_CP15
Linus Torvalds1da177e2005-04-16 15:20:36 -0700539 mrc p15, 0, r6, c0, c0 @ get processor ID
Hyok S. Choif12d0d72006-09-26 17:36:37 +0900540#else
541 ldr r6, =CONFIG_PROCESSOR_ID
542#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07005431: ldr r1, [r12, #0] @ get value
544 ldr r2, [r12, #4] @ get mask
545 eor r1, r1, r6 @ (real ^ match)
546 tst r1, r2 @ & mask
547 addeq pc, r12, r3 @ call cache function
548 add r12, r12, #4*5
549 b 1b
550
551/*
552 * Table for cache operations. This is basically:
553 * - CPU ID match
554 * - CPU ID mask
555 * - 'cache on' method instruction
556 * - 'cache off' method instruction
557 * - 'cache flush' method instruction
558 *
559 * We match an entry using: ((real_id ^ match) & mask) == 0
560 *
561 * Writethrough caches generally only need 'on' and 'off'
562 * methods. Writeback caches _must_ have the flush method
563 * defined.
564 */
565 .type proc_types,#object
566proc_types:
567 .word 0x41560600 @ ARM6/610
568 .word 0xffffffe0
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000569 b __arm6_mmu_cache_off @ works, but slow
570 b __arm6_mmu_cache_off
Linus Torvalds1da177e2005-04-16 15:20:36 -0700571 mov pc, lr
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000572@ b __arm6_mmu_cache_on @ untested
573@ b __arm6_mmu_cache_off
574@ b __armv3_mmu_cache_flush
Linus Torvalds1da177e2005-04-16 15:20:36 -0700575
576 .word 0x00000000 @ old ARM ID
577 .word 0x0000f000
578 mov pc, lr
579 mov pc, lr
580 mov pc, lr
581
582 .word 0x41007000 @ ARM7/710
583 .word 0xfff8fe00
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000584 b __arm7_mmu_cache_off
585 b __arm7_mmu_cache_off
Linus Torvalds1da177e2005-04-16 15:20:36 -0700586 mov pc, lr
587
588 .word 0x41807200 @ ARM720T (writethrough)
589 .word 0xffffff00
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000590 b __armv4_mmu_cache_on
591 b __armv4_mmu_cache_off
Linus Torvalds1da177e2005-04-16 15:20:36 -0700592 mov pc, lr
593
Hyok S. Choi10c2df62006-03-27 10:21:34 +0100594 .word 0x41007400 @ ARM74x
595 .word 0xff00ff00
596 b __armv3_mpu_cache_on
597 b __armv3_mpu_cache_off
598 b __armv3_mpu_cache_flush
599
600 .word 0x41009400 @ ARM94x
601 .word 0xff00ff00
602 b __armv4_mpu_cache_on
603 b __armv4_mpu_cache_off
604 b __armv4_mpu_cache_flush
605
Linus Torvalds1da177e2005-04-16 15:20:36 -0700606 .word 0x00007000 @ ARM7 IDs
607 .word 0x0000f000
608 mov pc, lr
609 mov pc, lr
610 mov pc, lr
611
612 @ Everything from here on will be the new ID system.
613
614 .word 0x4401a100 @ sa110 / sa1100
615 .word 0xffffffe0
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000616 b __armv4_mmu_cache_on
617 b __armv4_mmu_cache_off
618 b __armv4_mmu_cache_flush
Linus Torvalds1da177e2005-04-16 15:20:36 -0700619
620 .word 0x6901b110 @ sa1110
621 .word 0xfffffff0
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000622 b __armv4_mmu_cache_on
623 b __armv4_mmu_cache_off
624 b __armv4_mmu_cache_flush
Linus Torvalds1da177e2005-04-16 15:20:36 -0700625
Nicolas Pitre2e2023f2008-06-03 23:06:21 +0200626 .word 0x56050000 @ Feroceon
627 .word 0xff0f0000
Nicolas Pitre3ebb5a22007-10-31 15:31:48 -0400628 b __armv4_mmu_cache_on
629 b __armv4_mmu_cache_off
630 b __armv5tej_mmu_cache_flush
631
Linus Torvalds1da177e2005-04-16 15:20:36 -0700632 @ These match on the architecture ID
633
634 .word 0x00020000 @ ARMv4T
635 .word 0x000f0000
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000636 b __armv4_mmu_cache_on
637 b __armv4_mmu_cache_off
638 b __armv4_mmu_cache_flush
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639
640 .word 0x00050000 @ ARMv5TE
641 .word 0x000f0000
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000642 b __armv4_mmu_cache_on
643 b __armv4_mmu_cache_off
644 b __armv4_mmu_cache_flush
Linus Torvalds1da177e2005-04-16 15:20:36 -0700645
646 .word 0x00060000 @ ARMv5TEJ
647 .word 0x000f0000
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000648 b __armv4_mmu_cache_on
649 b __armv4_mmu_cache_off
Nicolas Pitre15754bf2007-10-31 15:15:29 -0400650 b __armv5tej_mmu_cache_flush
Linus Torvalds1da177e2005-04-16 15:20:36 -0700651
Catalin Marinas45a7b9c2006-06-18 16:21:50 +0100652 .word 0x0007b000 @ ARMv6
Catalin Marinas7d09e852007-06-01 17:14:53 +0100653 .word 0x000ff000
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000654 b __armv4_mmu_cache_on
655 b __armv4_mmu_cache_off
656 b __armv6_mmu_cache_flush
Linus Torvalds1da177e2005-04-16 15:20:36 -0700657
Catalin Marinas7d09e852007-06-01 17:14:53 +0100658 .word 0x000f0000 @ new CPU Id
659 .word 0x000f0000
660 b __armv7_mmu_cache_on
661 b __armv7_mmu_cache_off
662 b __armv7_mmu_cache_flush
663
Linus Torvalds1da177e2005-04-16 15:20:36 -0700664 .word 0 @ unrecognised type
665 .word 0
666 mov pc, lr
667 mov pc, lr
668 mov pc, lr
669
670 .size proc_types, . - proc_types
671
672/*
673 * Turn off the Cache and MMU. ARMv3 does not support
674 * reading the control register, but ARMv4 does.
675 *
676 * On entry, r6 = processor ID
677 * On exit, r0, r1, r2, r3, r12 corrupted
678 * This routine must preserve: r4, r6, r7
679 */
680 .align 5
681cache_off: mov r3, #12 @ cache_off function
682 b call_cache_fn
683
Hyok S. Choi10c2df62006-03-27 10:21:34 +0100684__armv4_mpu_cache_off:
685 mrc p15, 0, r0, c1, c0
686 bic r0, r0, #0x000d
687 mcr p15, 0, r0, c1, c0 @ turn MPU and cache off
688 mov r0, #0
689 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
690 mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache
691 mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache
692 mov pc, lr
693
694__armv3_mpu_cache_off:
695 mrc p15, 0, r0, c1, c0
696 bic r0, r0, #0x000d
697 mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off
698 mov r0, #0
699 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
700 mov pc, lr
701
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000702__armv4_mmu_cache_off:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700703 mrc p15, 0, r0, c1, c0
704 bic r0, r0, #0x000d
705 mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
706 mov r0, #0
707 mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4
708 mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
709 mov pc, lr
710
Catalin Marinas7d09e852007-06-01 17:14:53 +0100711__armv7_mmu_cache_off:
712 mrc p15, 0, r0, c1, c0
713 bic r0, r0, #0x000d
714 mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
715 mov r12, lr
716 bl __armv7_mmu_cache_flush
717 mov r0, #0
718 mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
719 mov pc, r12
720
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000721__arm6_mmu_cache_off:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700722 mov r0, #0x00000030 @ ARM6 control reg.
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000723 b __armv3_mmu_cache_off
Linus Torvalds1da177e2005-04-16 15:20:36 -0700724
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000725__arm7_mmu_cache_off:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700726 mov r0, #0x00000070 @ ARM7 control reg.
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000727 b __armv3_mmu_cache_off
Linus Torvalds1da177e2005-04-16 15:20:36 -0700728
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000729__armv3_mmu_cache_off:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700730 mcr p15, 0, r0, c1, c0, 0 @ turn MMU and cache off
731 mov r0, #0
732 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
733 mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
734 mov pc, lr
735
736/*
737 * Clean and flush the cache to maintain consistency.
738 *
739 * On entry,
740 * r6 = processor ID
741 * On exit,
742 * r1, r2, r3, r11, r12 corrupted
743 * This routine must preserve:
744 * r0, r4, r5, r6, r7
745 */
746 .align 5
747cache_clean_flush:
748 mov r3, #16
749 b call_cache_fn
750
Hyok S. Choi10c2df62006-03-27 10:21:34 +0100751__armv4_mpu_cache_flush:
752 mov r2, #1
753 mov r3, #0
754 mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
755 mov r1, #7 << 5 @ 8 segments
7561: orr r3, r1, #63 << 26 @ 64 entries
7572: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
758 subs r3, r3, #1 << 26
759 bcs 2b @ entries 63 to 0
760 subs r1, r1, #1 << 5
761 bcs 1b @ segments 7 to 0
762
763 teq r2, #0
764 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
765 mcr p15, 0, ip, c7, c10, 4 @ drain WB
766 mov pc, lr
767
768
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000769__armv6_mmu_cache_flush:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700770 mov r1, #0
771 mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D
772 mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB
773 mcr p15, 0, r1, c7, c15, 0 @ clean+invalidate unified
774 mcr p15, 0, r1, c7, c10, 4 @ drain WB
775 mov pc, lr
776
Catalin Marinas7d09e852007-06-01 17:14:53 +0100777__armv7_mmu_cache_flush:
778 mrc p15, 0, r10, c0, c1, 5 @ read ID_MMFR1
779 tst r10, #0xf << 16 @ hierarchical cache (ARMv7)
780 beq hierarchical
781 mov r10, #0
782 mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D
783 b iflush
784hierarchical:
785 stmfd sp!, {r0-r5, r7, r9-r11}
786 mrc p15, 1, r0, c0, c0, 1 @ read clidr
787 ands r3, r0, #0x7000000 @ extract loc from clidr
788 mov r3, r3, lsr #23 @ left align loc bit field
789 beq finished @ if loc is 0, then no need to clean
790 mov r10, #0 @ start clean at cache level 0
791loop1:
792 add r2, r10, r10, lsr #1 @ work out 3x current cache level
793 mov r1, r0, lsr r2 @ extract cache type bits from clidr
794 and r1, r1, #7 @ mask of the bits for current cache only
795 cmp r1, #2 @ see what cache we have at this level
796 blt skip @ skip if no cache, or just i-cache
797 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
798 mcr p15, 0, r10, c7, c5, 4 @ isb to sych the new cssr&csidr
799 mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
800 and r2, r1, #7 @ extract the length of the cache lines
801 add r2, r2, #4 @ add 4 (line length offset)
802 ldr r4, =0x3ff
803 ands r4, r4, r1, lsr #3 @ find maximum number on the way size
804 .word 0xe16f5f14 @ clz r5, r4 - find bit position of way size increment
805 ldr r7, =0x7fff
806 ands r7, r7, r1, lsr #13 @ extract max number of the index size
807loop2:
808 mov r9, r4 @ create working copy of max way size
809loop3:
810 orr r11, r10, r9, lsl r5 @ factor way and cache number into r11
811 orr r11, r11, r7, lsl r2 @ factor index number into r11
812 mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
813 subs r9, r9, #1 @ decrement the way
814 bge loop3
815 subs r7, r7, #1 @ decrement the index
816 bge loop2
817skip:
818 add r10, r10, #2 @ increment cache number
819 cmp r3, r10
820 bgt loop1
821finished:
822 mov r10, #0 @ swith back to cache level 0
823 mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
824 ldmfd sp!, {r0-r5, r7, r9-r11}
825iflush:
826 mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB
827 mcr p15, 0, r10, c7, c10, 4 @ drain WB
828 mov pc, lr
829
Nicolas Pitre15754bf2007-10-31 15:15:29 -0400830__armv5tej_mmu_cache_flush:
8311: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache
832 bne 1b
833 mcr p15, 0, r0, c7, c5, 0 @ flush I cache
834 mcr p15, 0, r0, c7, c10, 4 @ drain WB
835 mov pc, lr
836
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000837__armv4_mmu_cache_flush:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700838 mov r2, #64*1024 @ default: 32K dcache size (*2)
839 mov r11, #32 @ default: 32 byte line size
840 mrc p15, 0, r3, c0, c0, 1 @ read cache type
841 teq r3, r6 @ cache ID register present?
842 beq no_cache_id
843 mov r1, r3, lsr #18
844 and r1, r1, #7
845 mov r2, #1024
846 mov r2, r2, lsl r1 @ base dcache size *2
847 tst r3, #1 << 14 @ test M bit
848 addne r2, r2, r2, lsr #1 @ +1/2 size if M == 1
849 mov r3, r3, lsr #12
850 and r3, r3, #3
851 mov r11, #8
852 mov r11, r11, lsl r3 @ cache line size in bytes
853no_cache_id:
854 bic r1, pc, #63 @ align to longest cache line
855 add r2, r1, r2
8561: ldr r3, [r1], r11 @ s/w flush D cache
857 teq r1, r2
858 bne 1b
859
860 mcr p15, 0, r1, c7, c5, 0 @ flush I cache
861 mcr p15, 0, r1, c7, c6, 0 @ flush D cache
862 mcr p15, 0, r1, c7, c10, 4 @ drain WB
863 mov pc, lr
864
Hyok S. Choic76b6b42006-03-24 09:53:18 +0000865__armv3_mmu_cache_flush:
Hyok S. Choi10c2df62006-03-27 10:21:34 +0100866__armv3_mpu_cache_flush:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700867 mov r1, #0
868 mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
869 mov pc, lr
870
871/*
872 * Various debugging routines for printing hex characters and
873 * memory, which again must be relocatable.
874 */
875#ifdef DEBUG
876 .type phexbuf,#object
877phexbuf: .space 12
878 .size phexbuf, . - phexbuf
879
880phex: adr r3, phexbuf
881 mov r2, #0
882 strb r2, [r3, r1]
8831: subs r1, r1, #1
884 movmi r0, r3
885 bmi puts
886 and r2, r0, #15
887 mov r0, r0, lsr #4
888 cmp r2, #10
889 addge r2, r2, #7
890 add r2, r2, #'0'
891 strb r2, [r3, r1]
892 b 1b
893
894puts: loadsp r3
8951: ldrb r2, [r0], #1
896 teq r2, #0
897 moveq pc, lr
Russell King5cd0c3442005-05-03 12:18:46 +01008982: writeb r2, r3
Linus Torvalds1da177e2005-04-16 15:20:36 -0700899 mov r1, #0x00020000
9003: subs r1, r1, #1
901 bne 3b
902 teq r2, #'\n'
903 moveq r2, #'\r'
904 beq 2b
905 teq r0, #0
906 bne 1b
907 mov pc, lr
908putc:
909 mov r2, r0
910 mov r0, #0
911 loadsp r3
912 b 2b
913
914memdump: mov r12, r0
915 mov r10, lr
916 mov r11, #0
9172: mov r0, r11, lsl #2
918 add r0, r0, r12
919 mov r1, #8
920 bl phex
921 mov r0, #':'
922 bl putc
9231: mov r0, #' '
924 bl putc
925 ldr r0, [r12, r11, lsl #2]
926 mov r1, #8
927 bl phex
928 and r0, r11, #7
929 teq r0, #3
930 moveq r0, #' '
931 bleq putc
932 and r0, r11, #7
933 add r11, r11, #1
934 teq r0, #7
935 bne 1b
936 mov r0, #'\n'
937 bl putc
938 cmp r11, #64
939 blt 2b
940 mov pc, r10
941#endif
942
Catalin Marinas92c83ff12007-06-22 14:27:50 +0100943 .ltorg
Linus Torvalds1da177e2005-04-16 15:20:36 -0700944reloc_end:
945
946 .align
947 .section ".stack", "w"
948user_stack: .space 4096