Viresh Kumar | 52130b6 | 2012-03-28 22:27:07 +0530 | [diff] [blame] | 1 | ST Microelectronics, SPEAr pinmux controller |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible : "st,spear300-pinmux" |
| 5 | : "st,spear310-pinmux" |
| 6 | : "st,spear320-pinmux" |
Viresh Kumar | 85ed41a | 2012-03-28 22:27:07 +0530 | [diff] [blame] | 7 | : "st,spear1310-pinmux" |
| 8 | : "st,spear1340-pinmux" |
Viresh Kumar | 52130b6 | 2012-03-28 22:27:07 +0530 | [diff] [blame] | 9 | - reg : Address range of the pinctrl registers |
| 10 | - st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others. |
| 11 | - Its values for SPEAr300: |
| 12 | - NAND_MODE : <0> |
| 13 | - NOR_MODE : <1> |
| 14 | - PHOTO_FRAME_MODE : <2> |
| 15 | - LEND_IP_PHONE_MODE : <3> |
| 16 | - HEND_IP_PHONE_MODE : <4> |
| 17 | - LEND_WIFI_PHONE_MODE : <5> |
| 18 | - HEND_WIFI_PHONE_MODE : <6> |
| 19 | - ATA_PABX_WI2S_MODE : <7> |
| 20 | - ATA_PABX_I2S_MODE : <8> |
| 21 | - CAML_LCDW_MODE : <9> |
| 22 | - CAMU_LCD_MODE : <10> |
| 23 | - CAMU_WLCD_MODE : <11> |
| 24 | - CAML_LCD_MODE : <12> |
| 25 | - Its values for SPEAr320: |
| 26 | - AUTO_NET_SMII_MODE : <0> |
| 27 | - AUTO_NET_MII_MODE : <1> |
| 28 | - AUTO_EXP_MODE : <2> |
| 29 | - SMALL_PRINTERS_MODE : <3> |
| 30 | - EXTENDED_MODE : <4> |
| 31 | |
| 32 | Please refer to pinctrl-bindings.txt in this directory for details of the common |
| 33 | pinctrl bindings used by client devices. |
| 34 | |
Soren Brinkmann | a0e27f5 | 2014-11-06 07:38:51 -0800 | [diff] [blame^] | 35 | SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each |
Viresh Kumar | 52130b6 | 2012-03-28 22:27:07 +0530 | [diff] [blame] | 36 | of these subnodes represents muxing for a pin, a group, or a list of pins or |
| 37 | groups. |
| 38 | |
| 39 | The name of each subnode is not important; all subnodes should be enumerated |
| 40 | and processed purely based on their content. |
| 41 | |
| 42 | Required subnode-properties: |
| 43 | - st,pins : An array of strings. Each string contains the name of a pin or |
| 44 | group. |
| 45 | - st,function: A string containing the name of the function to mux to the pin or |
| 46 | group. See the SPEAr's TRM to determine which are valid for each pin or group. |
| 47 | |
| 48 | Valid values for group and function names can be found from looking at the |
| 49 | group and function arrays in driver files: |
| 50 | drivers/pinctrl/spear/pinctrl-spear3*0.c |
| 51 | |
| 52 | Valid values for group names are: |
| 53 | For All SPEAr3xx machines: |
| 54 | "firda_grp", "i2c0_grp", "ssp_cs_grp", "ssp0_grp", "mii0_grp", |
| 55 | "gpio0_pin0_grp", "gpio0_pin1_grp", "gpio0_pin2_grp", "gpio0_pin3_grp", |
| 56 | "gpio0_pin4_grp", "gpio0_pin5_grp", "uart0_ext_grp", "uart0_grp", |
| 57 | "timer_0_1_grp", timer_0_1_pins, "timer_2_3_grp" |
| 58 | |
| 59 | For SPEAr300 machines: |
| 60 | "fsmc_2chips_grp", "fsmc_4chips_grp", "clcd_lcdmode_grp", |
| 61 | "clcd_pfmode_grp", "tdm_grp", "i2c_clk_grp_grp", "caml_grp", "camu_grp", |
| 62 | "dac_grp", "i2s_grp", "sdhci_4bit_grp", "sdhci_8bit_grp", |
| 63 | "gpio1_0_to_3_grp", "gpio1_4_to_7_grp" |
| 64 | |
| 65 | For SPEAr310 machines: |
| 66 | "emi_cs_0_to_5_grp", "uart1_grp", "uart2_grp", "uart3_grp", "uart4_grp", |
| 67 | "uart5_grp", "fsmc_grp", "rs485_0_grp", "rs485_1_grp", "tdm_grp" |
| 68 | |
| 69 | For SPEAr320 machines: |
| 70 | "clcd_grp", "emi_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "spp_grp", |
| 71 | "sdhci_led_grp", "sdhci_cd_12_grp", "sdhci_cd_51_grp", "i2s_grp", |
| 72 | "uart1_grp", "uart1_modem_2_to_7_grp", "uart1_modem_31_to_36_grp", |
| 73 | "uart1_modem_34_to_45_grp", "uart1_modem_80_to_85_grp", "uart2_grp", |
| 74 | "uart3_8_9_grp", "uart3_15_16_grp", "uart3_41_42_grp", |
| 75 | "uart3_52_53_grp", "uart3_73_74_grp", "uart3_94_95_grp", |
| 76 | "uart3_98_99_grp", "uart4_6_7_grp", "uart4_13_14_grp", |
| 77 | "uart4_39_40_grp", "uart4_71_72_grp", "uart4_92_93_grp", |
| 78 | "uart4_100_101_grp", "uart5_4_5_grp", "uart5_37_38_grp", |
| 79 | "uart5_69_70_grp", "uart5_90_91_grp", "uart6_2_3_grp", |
| 80 | "uart6_88_89_grp", "rs485_grp", "touchscreen_grp", "can0_grp", |
| 81 | "can1_grp", "pwm0_1_pin_8_9_grp", "pwm0_1_pin_14_15_grp", |
| 82 | "pwm0_1_pin_30_31_grp", "pwm0_1_pin_37_38_grp", "pwm0_1_pin_42_43_grp", |
| 83 | "pwm0_1_pin_59_60_grp", "pwm0_1_pin_88_89_grp", "pwm2_pin_7_grp", |
| 84 | "pwm2_pin_13_grp", "pwm2_pin_29_grp", "pwm2_pin_34_grp", |
| 85 | "pwm2_pin_41_grp", "pwm2_pin_58_grp", "pwm2_pin_87_grp", |
| 86 | "pwm3_pin_6_grp", "pwm3_pin_12_grp", "pwm3_pin_28_grp", |
| 87 | "pwm3_pin_40_grp", "pwm3_pin_57_grp", "pwm3_pin_86_grp", |
| 88 | "ssp1_17_20_grp", "ssp1_36_39_grp", "ssp1_48_51_grp", "ssp1_65_68_grp", |
| 89 | "ssp1_94_97_grp", "ssp2_13_16_grp", "ssp2_32_35_grp", "ssp2_44_47_grp", |
| 90 | "ssp2_61_64_grp", "ssp2_90_93_grp", "mii2_grp", "smii0_1_grp", |
| 91 | "rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp", |
| 92 | "i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp" |
| 93 | |
Viresh Kumar | 85ed41a | 2012-03-28 22:27:07 +0530 | [diff] [blame] | 94 | For SPEAr1310 machines: |
| 95 | "i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp", |
| 96 | "i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp", |
| 97 | "smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp", |
| 98 | "smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp", |
| 99 | "nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp", |
| 100 | "keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp", |
| 101 | "gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp", |
| 102 | "sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp", |
| 103 | "uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp", |
| 104 | "uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp", |
| 105 | "i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp", |
| 106 | "i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp", |
| 107 | "i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp", |
| 108 | "can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp", |
| 109 | "pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp", |
| 110 | "ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp" |
| 111 | |
| 112 | For SPEAr1340 machines: |
| 113 | "pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp", |
| 114 | "keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp", |
| 115 | "spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp", |
| 116 | "pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp", |
| 117 | "vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp", |
| 118 | "cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp", |
| 119 | "ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp", |
| 120 | "uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp", |
| 121 | "rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp", |
| 122 | "sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp", |
| 123 | "miphy_dbg_grp", "pcie_grp", "sata_grp" |
| 124 | |
Viresh Kumar | 52130b6 | 2012-03-28 22:27:07 +0530 | [diff] [blame] | 125 | Valid values for function names are: |
| 126 | For All SPEAr3xx machines: |
| 127 | "firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext", |
| 128 | "uart0", "timer_0_1", "timer_2_3" |
| 129 | |
| 130 | For SPEAr300 machines: |
| 131 | "fsmc", "clcd", "tdm", "i2c1", "cam", "dac", "i2s", "sdhci", "gpio1" |
| 132 | |
| 133 | For SPEAr310 machines: |
| 134 | "emi", "uart1", "uart2", "uart3", "uart4", "uart5", "fsmc", "rs485_0", |
| 135 | "rs485_1", "tdm" |
| 136 | |
| 137 | For SPEAr320 machines: |
| 138 | "clcd", "emi", "fsmc", "spp", "sdhci", "i2s", "uart1", "uart1_modem", |
| 139 | "uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen", |
| 140 | "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2", |
| 141 | "mii0_1", "i2c1", "i2c2" |
Viresh Kumar | 85ed41a | 2012-03-28 22:27:07 +0530 | [diff] [blame] | 142 | |
| 143 | |
| 144 | For SPEAr1310 machines: |
| 145 | "i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii", |
| 146 | "rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0", |
| 147 | "gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3", |
| 148 | "uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1", |
| 149 | "i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64" |
| 150 | |
| 151 | For SPEAr1340 machines: |
| 152 | "pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1", |
| 153 | "pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0", |
| 154 | "uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf", |
| 155 | "xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata" |