Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Device Tree file for NETGEAR ReadyNAS 104 |
| 3 | * |
| 4 | * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License |
| 8 | * as published by the Free Software Foundation; either version |
| 9 | * 2 of the License, or (at your option) any later version. |
| 10 | */ |
| 11 | |
| 12 | /dts-v1/; |
| 13 | |
| 14 | #include "armada-370.dtsi" |
| 15 | |
| 16 | / { |
| 17 | model = "NETGEAR ReadyNAS 104"; |
| 18 | compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp"; |
| 19 | |
| 20 | chosen { |
| 21 | bootargs = "console=ttyS0,115200 earlyprintk"; |
| 22 | }; |
| 23 | |
| 24 | memory { |
| 25 | device_type = "memory"; |
| 26 | reg = <0x00000000 0x20000000>; /* 512 MB */ |
| 27 | }; |
| 28 | |
| 29 | soc { |
| 30 | ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 |
| 31 | MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; |
| 32 | |
| 33 | pcie-controller { |
| 34 | status = "okay"; |
| 35 | |
| 36 | /* Connected to FL1009 USB 3.0 controller */ |
| 37 | pcie@1,0 { |
| 38 | /* Port 0, Lane 0 */ |
| 39 | status = "okay"; |
| 40 | }; |
| 41 | |
| 42 | /* Connected to Marvell 88SE9215 SATA controller */ |
| 43 | pcie@2,0 { |
| 44 | /* Port 1, Lane 0 */ |
| 45 | status = "okay"; |
| 46 | }; |
| 47 | }; |
| 48 | |
| 49 | internal-regs { |
| 50 | serial@12000 { |
| 51 | clock-frequency = <200000000>; |
| 52 | status = "okay"; |
| 53 | }; |
| 54 | |
| 55 | pinctrl { |
| 56 | poweroff: poweroff { |
| 57 | marvell,pins = "mpp60"; |
| 58 | marvell,function = "gpio"; |
| 59 | }; |
| 60 | |
| 61 | backup_key_pin: backup-key-pin { |
| 62 | marvell,pins = "mpp52"; |
| 63 | marvell,function = "gpio"; |
| 64 | }; |
| 65 | |
| 66 | power_key_pin: power-key-pin { |
| 67 | marvell,pins = "mpp62"; |
| 68 | marvell,function = "gpio"; |
| 69 | }; |
| 70 | |
| 71 | backup_led_pin: backup-led-pin { |
| 72 | marvell,pins = "mpp63"; |
| 73 | marvell,function = "gpo"; |
| 74 | }; |
| 75 | |
| 76 | power_led_pin: power-led-pin { |
| 77 | marvell,pins = "mpp64"; |
| 78 | marvell,function = "gpio"; |
| 79 | }; |
| 80 | |
| 81 | reset_key_pin: reset-key-pin { |
| 82 | marvell,pins = "mpp65"; |
| 83 | marvell,function = "gpio"; |
| 84 | }; |
| 85 | }; |
| 86 | |
| 87 | mdio { |
| 88 | phy0: ethernet-phy@0 { |
| 89 | reg = <0>; |
| 90 | }; |
| 91 | |
| 92 | phy1: ethernet-phy@1 { |
| 93 | reg = <1>; |
| 94 | }; |
| 95 | }; |
| 96 | |
| 97 | ethernet@70000 { |
| 98 | status = "okay"; |
| 99 | phy = <&phy0>; |
| 100 | phy-mode = "rgmii-id"; |
| 101 | }; |
| 102 | |
| 103 | ethernet@74000 { |
| 104 | status = "okay"; |
| 105 | phy = <&phy1>; |
| 106 | phy-mode = "rgmii-id"; |
| 107 | }; |
| 108 | |
| 109 | usb@50000 { |
| 110 | status = "okay"; |
| 111 | }; |
| 112 | |
| 113 | i2c@11000 { |
| 114 | compatible = "marvell,mv64xxx-i2c"; |
| 115 | clock-frequency = <100000>; |
| 116 | status = "okay"; |
| 117 | |
| 118 | g762: g762@3e { |
| 119 | compatible = "gmt,g762"; |
| 120 | reg = <0x3e>; |
| 121 | clocks = <&g762_clk>; /* input clock */ |
| 122 | fan_gear_mode = <0>; |
| 123 | fan_startv = <1>; |
| 124 | pwm_polarity = <0>; |
| 125 | }; |
| 126 | }; |
| 127 | }; |
| 128 | }; |
| 129 | |
| 130 | clocks { |
| 131 | #address-cells = <1>; |
| 132 | #size-cells = <0>; |
| 133 | |
| 134 | g762_clk: fixedclk { |
| 135 | compatible = "fixed-clock"; |
| 136 | #clock-cells = <0>; |
| 137 | clock-frequency = <8192>; |
| 138 | }; |
| 139 | }; |
| 140 | |
| 141 | gpio_leds { |
| 142 | compatible = "gpio-leds"; |
| 143 | pinctrl-0 = <&backup_led_pin &power_led_pin>; |
| 144 | pinctrl-names = "default"; |
| 145 | |
| 146 | blue_backup_led { |
| 147 | label = "rn104:blue:backup"; |
| 148 | gpios = <&gpio1 31 0>; /* GPIO 63 Active High */ |
| 149 | default-state = "off"; |
| 150 | }; |
| 151 | |
| 152 | blue_power_led { |
| 153 | label = "rn104:blue:pwr"; |
| 154 | gpios = <&gpio2 0 1>; /* GPIO 64 Active Low */ |
| 155 | linux,default-trigger = "keep"; |
| 156 | }; |
| 157 | }; |
| 158 | |
| 159 | gpio_keys { |
| 160 | compatible = "gpio-keys"; |
| 161 | #address-cells = <1>; |
| 162 | #size-cells = <0>; |
| 163 | pinctrl-0 = <&backup_key_pin |
| 164 | &power_key_pin |
| 165 | &reset_key_pin>; |
| 166 | pinctrl-names = "default"; |
| 167 | |
| 168 | button@1 { |
| 169 | label = "Backup Button"; |
| 170 | linux,code = <133>; /* KEY_COPY */ |
| 171 | gpios = <&gpio1 20 1>; |
| 172 | }; |
| 173 | |
| 174 | button@2 { |
| 175 | label = "Power Button"; |
| 176 | linux,code = <116>; /* KEY_POWER */ |
| 177 | gpios = <&gpio1 30 0>; |
| 178 | }; |
| 179 | |
| 180 | button@3 { |
| 181 | label = "Reset Button"; |
| 182 | linux,code = <0x198>; /* KEY_RESTART */ |
| 183 | gpios = <&gpio2 1 1>; |
| 184 | }; |
| 185 | }; |
| 186 | |
| 187 | gpio_poweroff { |
| 188 | compatible = "gpio-poweroff"; |
| 189 | pinctrl-0 = <&poweroff>; |
| 190 | pinctrl-names = "default"; |
| 191 | gpios = <&gpio1 28 1>; |
| 192 | }; |
| 193 | }; |