blob: cbe9673439970a3f883fb58cce44a0cb46551ab6 [file] [log] [blame]
Douglas Gilbert2515e8b2013-04-18 14:53:06 +02001/*
2 * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
3 *
4 * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
5 *
6 * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
7 *
8 * Licensed under GPLv2 or later.
9 */
10/dts-v1/;
Nicolas Ferre004a3122013-05-31 16:41:02 +020011#include "at91sam9g20.dtsi"
Douglas Gilbert2515e8b2013-04-18 14:53:06 +020012
13/ {
14 model = "Acme Systems FoxG20";
15 compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9";
16
17 chosen {
18 bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
19 };
20
21 memory {
22 reg = <0x20000000 0x4000000>;
23 };
24
25 clocks {
26 #address-cells = <1>;
27 #size-cells = <1>;
28 ranges;
29
30 main_clock: clock@0 {
31 compatible = "atmel,osc", "fixed-clock";
32 clock-frequency = <18432000>;
33 };
34 };
35
36 ahb {
37 apb {
38 usb1: gadget@fffa4000 {
Nicolas Ferre004a3122013-05-31 16:41:02 +020039 atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
Douglas Gilbert2515e8b2013-04-18 14:53:06 +020040 status = "okay";
41 };
42
43 mmc0: mmc@fffa8000 {
44 pinctrl-0 = <
45 &pinctrl_mmc0_clk
46 &pinctrl_mmc0_slot1_cmd_dat0
47 &pinctrl_mmc0_slot1_dat1_3>;
48 status = "okay";
49
50 slot@1 {
51 reg = <1>;
52 bus-width = <4>;
53 };
54 };
55
56 usart0: serial@fffb0000 {
57 pinctrl-0 =
58 <&pinctrl_usart0
59 &pinctrl_usart0_rts
60 &pinctrl_usart0_cts
61 >;
62 status = "okay";
63 };
64
65 usart1: serial@fffb4000 {
66 status = "okay";
67 };
68
69 usart2: serial@fffb8000 {
70 status = "okay";
71 };
72
73 macb0: ethernet@fffc4000 {
74 phy-mode = "rmii";
75 status = "okay";
76 };
77
78 usart3: serial@fffd0000 {
79 status = "okay";
80 };
81
82 uart0: serial@fffd4000 {
83 status = "okay";
84 };
85
86 uart1: serial@fffd8000 {
87 status = "okay";
88 };
89
90 dbgu: serial@fffff200 {
91 status = "okay";
92 };
93
94 pinctrl@fffff400 {
95 board {
96 pinctrl_pck0_as_mck: pck0_as_mck {
97 atmel,pins =
Nicolas Ferre004a3122013-05-31 16:41:02 +020098 <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
Douglas Gilbert2515e8b2013-04-18 14:53:06 +020099 };
100 };
101
102 mmc0_slot1 {
103 pinctrl_board_mmc0_slot1: mmc0_slot1-board {
104 atmel,pins =
Nicolas Ferre004a3122013-05-31 16:41:02 +0200105 <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* CD pin */
Douglas Gilbert2515e8b2013-04-18 14:53:06 +0200106 };
107 };
108
109 i2c0 {
110 pinctrl_i2c0: i2c0-0 {
111 atmel,pins =
Nicolas Ferre004a3122013-05-31 16:41:02 +0200112 <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* TWD (SDA), open drain */
113 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* TWCK (SCL), open drain */
Douglas Gilbert2515e8b2013-04-18 14:53:06 +0200114 };
115 };
116 };
117
118 watchdog@fffffd40 {
119 status = "okay";
120 };
121 };
122
123 usb0: ohci@00500000 {
124 num-ports = <2>;
125 status = "okay";
126 };
127 };
128
129 i2c@0 {
130 pinctrl-names = "default";
131 pinctrl-0 = <&pinctrl_i2c0>;
132 i2c-gpio,delay-us = <5>; /* ~85 kHz */
133 status = "okay";
134 };
135
136 leds {
137 compatible = "gpio-leds";
138
139 /* red LED marked "PC7" near mini USB (device) receptacle */
140 user_led {
141 label = "user_led";
Nicolas Ferre004a3122013-05-31 16:41:02 +0200142 gpios = <&pioC 7 GPIO_ACTIVE_HIGH>; /* PC7 */
Douglas Gilbert2515e8b2013-04-18 14:53:06 +0200143 linux,default-trigger = "heartbeat";
144 };
145 };
146
147 gpio_keys {
148 compatible = "gpio-keys";
149
150 btn {
151 label = "Button";
Nicolas Ferre004a3122013-05-31 16:41:02 +0200152 gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
Douglas Gilbert2515e8b2013-04-18 14:53:06 +0200153 linux,code = <0x103>;
154 gpio-key,wakeup;
155 };
156 };
157};