blob: 65391891d8c41a180592d500825df75f67b44e4c [file] [log] [blame]
Scott Woode2ec4582007-10-01 14:20:56 -05001/*
2 * Bitbanged MDIO support.
3 *
4 * Author: Scott Wood <scottwood@freescale.com>
5 * Copyright (c) 2007 Freescale Semiconductor
6 *
7 * Based on CPM2 MDIO code which is:
8 *
9 * Copyright (c) 2003 Intracom S.A.
10 * by Pantelis Antoniou <panto@intracom.gr>
11 *
12 * 2005 (c) MontaVista Software, Inc.
13 * Vitaly Bordug <vbordug@ru.mvista.com>
14 *
15 * This file is licensed under the terms of the GNU General Public License
16 * version 2. This program is licensed "as is" without any warranty of any
17 * kind, whether express or implied.
18 */
19
20#include <linux/module.h>
21#include <linux/mdio-bitbang.h>
Scott Woode2ec4582007-10-01 14:20:56 -050022#include <linux/types.h>
23#include <linux/delay.h>
24
Jason Gunthorpeabf35df2010-03-09 09:17:42 +000025#define MDIO_READ 2
26#define MDIO_WRITE 1
27
28#define MDIO_C45 (1<<15)
29#define MDIO_C45_ADDR (MDIO_C45 | 0)
30#define MDIO_C45_READ (MDIO_C45 | 3)
31#define MDIO_C45_WRITE (MDIO_C45 | 1)
Scott Woode2ec4582007-10-01 14:20:56 -050032
33#define MDIO_SETUP_TIME 10
34#define MDIO_HOLD_TIME 10
35
36/* Minimum MDC period is 400 ns, plus some margin for error. MDIO_DELAY
37 * is done twice per period.
38 */
39#define MDIO_DELAY 250
40
41/* The PHY may take up to 300 ns to produce data, plus some margin
42 * for error.
43 */
44#define MDIO_READ_DELAY 350
45
46/* MDIO must already be configured as output. */
47static void mdiobb_send_bit(struct mdiobb_ctrl *ctrl, int val)
48{
49 const struct mdiobb_ops *ops = ctrl->ops;
50
51 ops->set_mdio_data(ctrl, val);
52 ndelay(MDIO_DELAY);
53 ops->set_mdc(ctrl, 1);
54 ndelay(MDIO_DELAY);
55 ops->set_mdc(ctrl, 0);
56}
57
58/* MDIO must already be configured as input. */
59static int mdiobb_get_bit(struct mdiobb_ctrl *ctrl)
60{
61 const struct mdiobb_ops *ops = ctrl->ops;
62
63 ndelay(MDIO_DELAY);
64 ops->set_mdc(ctrl, 1);
65 ndelay(MDIO_READ_DELAY);
66 ops->set_mdc(ctrl, 0);
67
68 return ops->get_mdio_data(ctrl);
69}
70
71/* MDIO must already be configured as output. */
72static void mdiobb_send_num(struct mdiobb_ctrl *ctrl, u16 val, int bits)
73{
74 int i;
75
76 for (i = bits - 1; i >= 0; i--)
77 mdiobb_send_bit(ctrl, (val >> i) & 1);
78}
79
80/* MDIO must already be configured as input. */
81static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits)
82{
83 int i;
84 u16 ret = 0;
85
86 for (i = bits - 1; i >= 0; i--) {
87 ret <<= 1;
88 ret |= mdiobb_get_bit(ctrl);
89 }
90
91 return ret;
92}
93
94/* Utility to send the preamble, address, and
95 * register (common to read and write).
96 */
Jason Gunthorpeabf35df2010-03-09 09:17:42 +000097static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int op, u8 phy, u8 reg)
Scott Woode2ec4582007-10-01 14:20:56 -050098{
99 const struct mdiobb_ops *ops = ctrl->ops;
100 int i;
101
102 ops->set_mdio_dir(ctrl, 1);
103
104 /*
105 * Send a 32 bit preamble ('1's) with an extra '1' bit for good
106 * measure. The IEEE spec says this is a PHY optional
107 * requirement. The AMD 79C874 requires one after power up and
108 * one after a MII communications error. This means that we are
109 * doing more preambles than we need, but it is safer and will be
110 * much more robust.
111 */
112
113 for (i = 0; i < 32; i++)
114 mdiobb_send_bit(ctrl, 1);
115
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000116 /* send the start bit (01) and the read opcode (10) or write (10).
117 Clause 45 operation uses 00 for the start and 11, 10 for
118 read/write */
Scott Woode2ec4582007-10-01 14:20:56 -0500119 mdiobb_send_bit(ctrl, 0);
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000120 if (op & MDIO_C45)
121 mdiobb_send_bit(ctrl, 0);
122 else
123 mdiobb_send_bit(ctrl, 1);
124 mdiobb_send_bit(ctrl, (op >> 1) & 1);
125 mdiobb_send_bit(ctrl, (op >> 0) & 1);
Scott Woode2ec4582007-10-01 14:20:56 -0500126
127 mdiobb_send_num(ctrl, phy, 5);
128 mdiobb_send_num(ctrl, reg, 5);
129}
130
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000131/* In clause 45 mode all commands are prefixed by MDIO_ADDR to specify the
132 lower 16 bits of the 21 bit address. This transfer is done identically to a
133 MDIO_WRITE except for a different code. To enable clause 45 mode or
134 MII_ADDR_C45 into the address. Theoretically clause 45 and normal devices
135 can exist on the same bus. Normal devices should ignore the MDIO_ADDR
136 phase. */
137static int mdiobb_cmd_addr(struct mdiobb_ctrl *ctrl, int phy, u32 addr)
138{
139 unsigned int dev_addr = (addr >> 16) & 0x1F;
140 unsigned int reg = addr & 0xFFFF;
141 mdiobb_cmd(ctrl, MDIO_C45_ADDR, phy, dev_addr);
142
143 /* send the turnaround (10) */
144 mdiobb_send_bit(ctrl, 1);
145 mdiobb_send_bit(ctrl, 0);
146
147 mdiobb_send_num(ctrl, reg, 16);
148
149 ctrl->ops->set_mdio_dir(ctrl, 0);
150 mdiobb_get_bit(ctrl);
151
152 return dev_addr;
153}
Scott Woode2ec4582007-10-01 14:20:56 -0500154
155static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
156{
157 struct mdiobb_ctrl *ctrl = bus->priv;
158 int ret, i;
159
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000160 if (reg & MII_ADDR_C45) {
161 reg = mdiobb_cmd_addr(ctrl, phy, reg);
162 mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
163 } else
164 mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
165
Scott Woode2ec4582007-10-01 14:20:56 -0500166 ctrl->ops->set_mdio_dir(ctrl, 0);
167
168 /* check the turnaround bit: the PHY should be driving it to zero */
169 if (mdiobb_get_bit(ctrl) != 0) {
170 /* PHY didn't drive TA low -- flush any bits it
171 * may be trying to send.
172 */
173 for (i = 0; i < 32; i++)
174 mdiobb_get_bit(ctrl);
175
176 return 0xffff;
177 }
178
179 ret = mdiobb_get_num(ctrl, 16);
180 mdiobb_get_bit(ctrl);
181 return ret;
182}
183
184static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
185{
186 struct mdiobb_ctrl *ctrl = bus->priv;
187
Jason Gunthorpeabf35df2010-03-09 09:17:42 +0000188 if (reg & MII_ADDR_C45) {
189 reg = mdiobb_cmd_addr(ctrl, phy, reg);
190 mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
191 } else
192 mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
Scott Woode2ec4582007-10-01 14:20:56 -0500193
194 /* send the turnaround (10) */
195 mdiobb_send_bit(ctrl, 1);
196 mdiobb_send_bit(ctrl, 0);
197
198 mdiobb_send_num(ctrl, val, 16);
199
200 ctrl->ops->set_mdio_dir(ctrl, 0);
201 mdiobb_get_bit(ctrl);
202 return 0;
203}
204
205struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
206{
207 struct mii_bus *bus;
208
Lennert Buytenhek298cf9be2008-10-08 16:29:57 -0700209 bus = mdiobus_alloc();
Scott Woode2ec4582007-10-01 14:20:56 -0500210 if (!bus)
211 return NULL;
212
213 __module_get(ctrl->ops->owner);
214
215 bus->read = mdiobb_read;
216 bus->write = mdiobb_write;
217 bus->priv = ctrl;
218
219 return bus;
220}
Takashi Iwaie9911c22008-07-07 16:51:45 +0200221EXPORT_SYMBOL(alloc_mdio_bitbang);
Scott Woode2ec4582007-10-01 14:20:56 -0500222
223void free_mdio_bitbang(struct mii_bus *bus)
224{
225 struct mdiobb_ctrl *ctrl = bus->priv;
226
227 module_put(ctrl->ops->owner);
Lennert Buytenhek298cf9be2008-10-08 16:29:57 -0700228 mdiobus_free(bus);
Scott Woode2ec4582007-10-01 14:20:56 -0500229}
Takashi Iwaie9911c22008-07-07 16:51:45 +0200230EXPORT_SYMBOL(free_mdio_bitbang);
Randy Dunlap5a462362007-10-18 12:20:21 -0700231
232MODULE_LICENSE("GPL");