blob: f80dcc11fe26bad7f594fff1407d0e036fc84935 [file] [log] [blame]
Al Viro6c3561b2006-10-10 00:19:36 +01001/* 8390.c: A general NS8390 ethernet driver core for linux. */
2/*
3 Written 1992-94 by Donald Becker.
4
5 Copyright 1993 United States Government as represented by the
6 Director, National Security Agency.
7
8 This software may be used and distributed according to the terms
9 of the GNU General Public License, incorporated herein by reference.
10
11 The author may be reached as becker@scyld.com, or C/O
12 Scyld Computing Corporation
13 410 Severn Ave., Suite 210
14 Annapolis MD 21403
15
16
17 This is the chip-specific code for many 8390-based ethernet adaptors.
18 This is not a complete driver, it must be combined with board-specific
19 code such as ne.c, wd.c, 3c503.c, etc.
20
21 Seeing how at least eight drivers use this code, (not counting the
22 PCMCIA ones either) it is easy to break some card by what seems like
23 a simple innocent change. Please contact me or Donald if you think
24 you have found something that needs changing. -- PG
25
26
27 Changelog:
28
29 Paul Gortmaker : remove set_bit lock, other cleanups.
30 Paul Gortmaker : add ei_get_8390_hdr() so we can pass skb's to
31 ei_block_input() for eth_io_copy_and_sum().
32 Paul Gortmaker : exchange static int ei_pingpong for a #define,
33 also add better Tx error handling.
34 Paul Gortmaker : rewrite Rx overrun handling as per NS specs.
35 Alexey Kuznetsov : use the 8390's six bit hash multicast filter.
36 Paul Gortmaker : tweak ANK's above multicast changes a bit.
37 Paul Gortmaker : update packet statistics for v2.1.x
38 Alan Cox : support arbitary stupid port mappings on the
39 68K Macintosh. Support >16bit I/O spaces
40 Paul Gortmaker : add kmod support for auto-loading of the 8390
41 module by all drivers that require it.
42 Alan Cox : Spinlocking work, added 'BUG_83C690'
43 Paul Gortmaker : Separate out Tx timeout code from Tx path.
44 Paul Gortmaker : Remove old unused single Tx buffer code.
45 Hayato Fujiwara : Add m32r support.
46 Paul Gortmaker : use skb_padto() instead of stack scratch area
47
48 Sources:
49 The National Semiconductor LAN Databook, and the 3Com 3c503 databook.
50
51 */
52
53#include <linux/module.h>
54#include <linux/kernel.h>
55#include <linux/jiffies.h>
56#include <linux/fs.h>
57#include <linux/types.h>
58#include <linux/string.h>
59#include <linux/bitops.h>
60#include <asm/system.h>
61#include <asm/uaccess.h>
62#include <asm/io.h>
63#include <asm/irq.h>
64#include <linux/delay.h>
65#include <linux/errno.h>
66#include <linux/fcntl.h>
67#include <linux/in.h>
68#include <linux/interrupt.h>
69#include <linux/init.h>
70#include <linux/crc32.h>
71
72#include <linux/netdevice.h>
73#include <linux/etherdevice.h>
74
75#define NS8390_CORE
76#include "8390.h"
77
78#define BUG_83C690
79
80/* These are the operational function interfaces to board-specific
81 routines.
82 void reset_8390(struct net_device *dev)
83 Resets the board associated with DEV, including a hardware reset of
84 the 8390. This is only called when there is a transmit timeout, and
85 it is always followed by 8390_init().
86 void block_output(struct net_device *dev, int count, const unsigned char *buf,
87 int start_page)
88 Write the COUNT bytes of BUF to the packet buffer at START_PAGE. The
89 "page" value uses the 8390's 256-byte pages.
90 void get_8390_hdr(struct net_device *dev, struct e8390_hdr *hdr, int ring_page)
91 Read the 4 byte, page aligned 8390 header. *If* there is a
92 subsequent read, it will be of the rest of the packet.
93 void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
94 Read COUNT bytes from the packet buffer into the skb data area. Start
95 reading from RING_OFFSET, the address as the 8390 sees it. This will always
96 follow the read of the 8390 header.
97*/
98#define ei_reset_8390 (ei_local->reset_8390)
99#define ei_block_output (ei_local->block_output)
100#define ei_block_input (ei_local->block_input)
101#define ei_get_8390_hdr (ei_local->get_8390_hdr)
102
103/* use 0 for production, 1 for verification, >2 for debug */
104#ifndef ei_debug
105int ei_debug = 1;
106#endif
107
108/* Index to functions. */
109static void ei_tx_intr(struct net_device *dev);
110static void ei_tx_err(struct net_device *dev);
111static void ei_tx_timeout(struct net_device *dev);
112static void ei_receive(struct net_device *dev);
113static void ei_rx_overrun(struct net_device *dev);
114
115/* Routines generic to NS8390-based boards. */
116static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
117 int start_page);
118static void set_multicast_list(struct net_device *dev);
119static void do_set_multicast_list(struct net_device *dev);
120static void __NS8390_init(struct net_device *dev, int startp);
121
122/*
123 * SMP and the 8390 setup.
124 *
125 * The 8390 isnt exactly designed to be multithreaded on RX/TX. There is
126 * a page register that controls bank and packet buffer access. We guard
127 * this with ei_local->page_lock. Nobody should assume or set the page other
128 * than zero when the lock is not held. Lock holders must restore page 0
129 * before unlocking. Even pure readers must take the lock to protect in
130 * page 0.
131 *
132 * To make life difficult the chip can also be very slow. We therefore can't
133 * just use spinlocks. For the longer lockups we disable the irq the device
134 * sits on and hold the lock. We must hold the lock because there is a dual
135 * processor case other than interrupts (get stats/set multicast list in
136 * parallel with each other and transmit).
137 *
138 * Note: in theory we can just disable the irq on the card _but_ there is
139 * a latency on SMP irq delivery. So we can easily go "disable irq" "sync irqs"
140 * enter lock, take the queued irq. So we waddle instead of flying.
141 *
142 * Finally by special arrangement for the purpose of being generally
143 * annoying the transmit function is called bh atomic. That places
144 * restrictions on the user context callers as disable_irq won't save
145 * them.
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200146 *
147 * Additional explanation of problems with locking by Alan Cox:
148 *
149 * "The author (me) didn't use spin_lock_irqsave because the slowness of the
150 * card means that approach caused horrible problems like losing serial data
Robert P. J. Day14e4a0f2008-02-03 15:12:15 +0200151 * at 38400 baud on some chips. Remember many 8390 nics on PCI were ISA
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200152 * chips with FPGA front ends.
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400153 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200154 * Ok the logic behind the 8390 is very simple:
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400155 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200156 * Things to know
157 * - IRQ delivery is asynchronous to the PCI bus
158 * - Blocking the local CPU IRQ via spin locks was too slow
159 * - The chip has register windows needing locking work
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400160 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200161 * So the path was once (I say once as people appear to have changed it
162 * in the mean time and it now looks rather bogus if the changes to use
163 * disable_irq_nosync_irqsave are disabling the local IRQ)
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400164 *
165 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200166 * Take the page lock
167 * Mask the IRQ on chip
168 * Disable the IRQ (but not mask locally- someone seems to have
169 * broken this with the lock validator stuff)
170 * [This must be _nosync as the page lock may otherwise
171 * deadlock us]
172 * Drop the page lock and turn IRQs back on
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400173 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200174 * At this point an existing IRQ may still be running but we can't
175 * get a new one
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400176 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200177 * Take the lock (so we know the IRQ has terminated) but don't mask
178 * the IRQs on the processor
179 * Set irqlock [for debug]
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400180 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200181 * Transmit (slow as ****)
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400182 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200183 * re-enable the IRQ
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400184 *
185 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200186 * We have to use disable_irq because otherwise you will get delayed
187 * interrupts on the APIC bus deadlocking the transmit path.
Jeff Garzik3f8cb092008-05-13 01:41:28 -0400188 *
Jarek Poplawski55b7b622007-07-26 14:44:01 +0200189 * Quite hairy but the chip simply wasn't designed for SMP and you can't
190 * even ACK an interrupt without risking corrupting other parallel
191 * activities on the chip." [lkml, 25 Jul 2007]
Al Viro6c3561b2006-10-10 00:19:36 +0100192 */
193
194
195
196/**
197 * ei_open - Open/initialize the board.
198 * @dev: network device to initialize
199 *
200 * This routine goes all-out, setting everything
201 * up anew at each open, even though many of these registers should only
202 * need to be set once at boot.
203 */
204static int __ei_open(struct net_device *dev)
205{
206 unsigned long flags;
207 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
208
209 /* The card I/O part of the driver (e.g. 3c503) can hook a Tx timeout
210 wrapper that does e.g. media check & then calls ei_tx_timeout. */
211 if (dev->tx_timeout == NULL)
212 dev->tx_timeout = ei_tx_timeout;
213 if (dev->watchdog_timeo <= 0)
214 dev->watchdog_timeo = TX_TIMEOUT;
215
216 /*
217 * Grab the page lock so we own the register set, then call
218 * the init function.
219 */
220
221 spin_lock_irqsave(&ei_local->page_lock, flags);
222 __NS8390_init(dev, 1);
223 /* Set the flag before we drop the lock, That way the IRQ arrives
224 after its set and we get no silly warnings */
225 netif_start_queue(dev);
226 spin_unlock_irqrestore(&ei_local->page_lock, flags);
227 ei_local->irqlock = 0;
228 return 0;
229}
230
231/**
232 * ei_close - shut down network device
233 * @dev: network device to close
234 *
235 * Opposite of ei_open(). Only used when "ifconfig <devname> down" is done.
236 */
237static int __ei_close(struct net_device *dev)
238{
239 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
240 unsigned long flags;
241
242 /*
243 * Hold the page lock during close
244 */
245
246 spin_lock_irqsave(&ei_local->page_lock, flags);
247 __NS8390_init(dev, 0);
248 spin_unlock_irqrestore(&ei_local->page_lock, flags);
249 netif_stop_queue(dev);
250 return 0;
251}
252
253/**
254 * ei_tx_timeout - handle transmit time out condition
255 * @dev: network device which has apparently fallen asleep
256 *
257 * Called by kernel when device never acknowledges a transmit has
258 * completed (or failed) - i.e. never posted a Tx related interrupt.
259 */
260
261static void ei_tx_timeout(struct net_device *dev)
262{
263 unsigned long e8390_base = dev->base_addr;
264 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
265 int txsr, isr, tickssofar = jiffies - dev->trans_start;
266 unsigned long flags;
267
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300268 dev->stats.tx_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100269
270 spin_lock_irqsave(&ei_local->page_lock, flags);
271 txsr = ei_inb(e8390_base+EN0_TSR);
272 isr = ei_inb(e8390_base+EN0_ISR);
273 spin_unlock_irqrestore(&ei_local->page_lock, flags);
274
275 printk(KERN_DEBUG "%s: Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n",
276 dev->name, (txsr & ENTSR_ABT) ? "excess collisions." :
277 (isr) ? "lost interrupt?" : "cable problem?", txsr, isr, tickssofar);
278
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300279 if (!isr && !dev->stats.tx_packets)
Al Viro6c3561b2006-10-10 00:19:36 +0100280 {
281 /* The 8390 probably hasn't gotten on the cable yet. */
282 ei_local->interface_num ^= 1; /* Try a different xcvr. */
283 }
284
285 /* Ugly but a reset can be slow, yet must be protected */
286
287 disable_irq_nosync_lockdep(dev->irq);
288 spin_lock(&ei_local->page_lock);
289
290 /* Try to restart the card. Perhaps the user has fixed something. */
291 ei_reset_8390(dev);
292 __NS8390_init(dev, 1);
293
294 spin_unlock(&ei_local->page_lock);
295 enable_irq_lockdep(dev->irq);
296 netif_wake_queue(dev);
297}
298
299/**
300 * ei_start_xmit - begin packet transmission
301 * @skb: packet to be sent
302 * @dev: network device to which packet is sent
303 *
304 * Sends a packet to an 8390 network device.
305 */
306
307static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
308{
309 unsigned long e8390_base = dev->base_addr;
310 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
311 int send_length = skb->len, output_page;
312 unsigned long flags;
313 char buf[ETH_ZLEN];
314 char *data = skb->data;
315
316 if (skb->len < ETH_ZLEN) {
317 memset(buf, 0, ETH_ZLEN); /* more efficient than doing just the needed bits */
318 memcpy(buf, data, skb->len);
319 send_length = ETH_ZLEN;
320 data = buf;
321 }
322
323 /* Mask interrupts from the ethercard.
324 SMP: We have to grab the lock here otherwise the IRQ handler
325 on another CPU can flip window and race the IRQ mask set. We end
326 up trashing the mcast filter not disabling irqs if we don't lock */
327
328 spin_lock_irqsave(&ei_local->page_lock, flags);
329 ei_outb_p(0x00, e8390_base + EN0_IMR);
330 spin_unlock_irqrestore(&ei_local->page_lock, flags);
331
332
333 /*
334 * Slow phase with lock held.
335 */
336
337 disable_irq_nosync_lockdep_irqsave(dev->irq, &flags);
338
339 spin_lock(&ei_local->page_lock);
340
341 ei_local->irqlock = 1;
342
343 /*
344 * We have two Tx slots available for use. Find the first free
345 * slot, and then perform some sanity checks. With two Tx bufs,
346 * you get very close to transmitting back-to-back packets. With
347 * only one Tx buf, the transmitter sits idle while you reload the
348 * card, leaving a substantial gap between each transmitted packet.
349 */
350
351 if (ei_local->tx1 == 0)
352 {
353 output_page = ei_local->tx_start_page;
354 ei_local->tx1 = send_length;
355 if (ei_debug && ei_local->tx2 > 0)
356 printk(KERN_DEBUG "%s: idle transmitter tx2=%d, lasttx=%d, txing=%d.\n",
357 dev->name, ei_local->tx2, ei_local->lasttx, ei_local->txing);
358 }
359 else if (ei_local->tx2 == 0)
360 {
361 output_page = ei_local->tx_start_page + TX_PAGES/2;
362 ei_local->tx2 = send_length;
363 if (ei_debug && ei_local->tx1 > 0)
364 printk(KERN_DEBUG "%s: idle transmitter, tx1=%d, lasttx=%d, txing=%d.\n",
365 dev->name, ei_local->tx1, ei_local->lasttx, ei_local->txing);
366 }
367 else
368 { /* We should never get here. */
369 if (ei_debug)
370 printk(KERN_DEBUG "%s: No Tx buffers free! tx1=%d tx2=%d last=%d\n",
371 dev->name, ei_local->tx1, ei_local->tx2, ei_local->lasttx);
372 ei_local->irqlock = 0;
373 netif_stop_queue(dev);
374 ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR);
375 spin_unlock(&ei_local->page_lock);
376 enable_irq_lockdep_irqrestore(dev->irq, &flags);
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300377 dev->stats.tx_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100378 return 1;
379 }
380
381 /*
382 * Okay, now upload the packet and trigger a send if the transmitter
383 * isn't already sending. If it is busy, the interrupt handler will
384 * trigger the send later, upon receiving a Tx done interrupt.
385 */
386
387 ei_block_output(dev, send_length, data, output_page);
388
389 if (! ei_local->txing)
390 {
391 ei_local->txing = 1;
392 NS8390_trigger_send(dev, send_length, output_page);
393 dev->trans_start = jiffies;
394 if (output_page == ei_local->tx_start_page)
395 {
396 ei_local->tx1 = -1;
397 ei_local->lasttx = -1;
398 }
399 else
400 {
401 ei_local->tx2 = -1;
402 ei_local->lasttx = -2;
403 }
404 }
405 else ei_local->txqueue++;
406
407 if (ei_local->tx1 && ei_local->tx2)
408 netif_stop_queue(dev);
409 else
410 netif_start_queue(dev);
411
412 /* Turn 8390 interrupts back on. */
413 ei_local->irqlock = 0;
414 ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR);
415
416 spin_unlock(&ei_local->page_lock);
417 enable_irq_lockdep_irqrestore(dev->irq, &flags);
418
419 dev_kfree_skb (skb);
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300420 dev->stats.tx_bytes += send_length;
Al Viro6c3561b2006-10-10 00:19:36 +0100421
422 return 0;
423}
424
425/**
426 * ei_interrupt - handle the interrupts from an 8390
427 * @irq: interrupt number
428 * @dev_id: a pointer to the net_device
429 *
430 * Handle the ether interface interrupts. We pull packets from
431 * the 8390 via the card specific functions and fire them at the networking
432 * stack. We also handle transmit completions and wake the transmit path if
433 * necessary. We also update the counters and do other housekeeping as
434 * needed.
435 */
436
437static irqreturn_t __ei_interrupt(int irq, void *dev_id)
438{
439 struct net_device *dev = dev_id;
440 unsigned long e8390_base = dev->base_addr;
441 int interrupts, nr_serviced = 0;
442 struct ei_device *ei_local = netdev_priv(dev);
443
444 /*
445 * Protect the irq test too.
446 */
447
448 spin_lock(&ei_local->page_lock);
449
450 if (ei_local->irqlock)
451 {
452#if 1 /* This might just be an interrupt for a PCI device sharing this line */
453 /* The "irqlock" check is only for testing. */
454 printk(ei_local->irqlock
455 ? "%s: Interrupted while interrupts are masked! isr=%#2x imr=%#2x.\n"
456 : "%s: Reentering the interrupt handler! isr=%#2x imr=%#2x.\n",
457 dev->name, ei_inb_p(e8390_base + EN0_ISR),
458 ei_inb_p(e8390_base + EN0_IMR));
459#endif
460 spin_unlock(&ei_local->page_lock);
461 return IRQ_NONE;
462 }
463
464 /* Change to page 0 and read the intr status reg. */
465 ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD);
466 if (ei_debug > 3)
467 printk(KERN_DEBUG "%s: interrupt(isr=%#2.2x).\n", dev->name,
468 ei_inb_p(e8390_base + EN0_ISR));
469
470 /* !!Assumption!! -- we stay in page 0. Don't break this. */
471 while ((interrupts = ei_inb_p(e8390_base + EN0_ISR)) != 0
472 && ++nr_serviced < MAX_SERVICE)
473 {
474 if (!netif_running(dev)) {
475 printk(KERN_WARNING "%s: interrupt from stopped card\n", dev->name);
476 /* rmk - acknowledge the interrupts */
477 ei_outb_p(interrupts, e8390_base + EN0_ISR);
478 interrupts = 0;
479 break;
480 }
481 if (interrupts & ENISR_OVER)
482 ei_rx_overrun(dev);
483 else if (interrupts & (ENISR_RX+ENISR_RX_ERR))
484 {
485 /* Got a good (?) packet. */
486 ei_receive(dev);
487 }
488 /* Push the next to-transmit packet through. */
489 if (interrupts & ENISR_TX)
490 ei_tx_intr(dev);
491 else if (interrupts & ENISR_TX_ERR)
492 ei_tx_err(dev);
493
494 if (interrupts & ENISR_COUNTERS)
495 {
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300496 dev->stats.rx_frame_errors += ei_inb_p(e8390_base + EN0_COUNTER0);
497 dev->stats.rx_crc_errors += ei_inb_p(e8390_base + EN0_COUNTER1);
498 dev->stats.rx_missed_errors+= ei_inb_p(e8390_base + EN0_COUNTER2);
Al Viro6c3561b2006-10-10 00:19:36 +0100499 ei_outb_p(ENISR_COUNTERS, e8390_base + EN0_ISR); /* Ack intr. */
500 }
501
502 /* Ignore any RDC interrupts that make it back to here. */
503 if (interrupts & ENISR_RDC)
504 {
505 ei_outb_p(ENISR_RDC, e8390_base + EN0_ISR);
506 }
507
508 ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD);
509 }
510
511 if (interrupts && ei_debug)
512 {
513 ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD);
514 if (nr_serviced >= MAX_SERVICE)
515 {
516 /* 0xFF is valid for a card removal */
517 if(interrupts!=0xFF)
518 printk(KERN_WARNING "%s: Too much work at interrupt, status %#2.2x\n",
519 dev->name, interrupts);
520 ei_outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */
521 } else {
522 printk(KERN_WARNING "%s: unknown interrupt %#2x\n", dev->name, interrupts);
523 ei_outb_p(0xff, e8390_base + EN0_ISR); /* Ack. all intrs. */
524 }
525 }
526 spin_unlock(&ei_local->page_lock);
527 return IRQ_RETVAL(nr_serviced > 0);
528}
529
530#ifdef CONFIG_NET_POLL_CONTROLLER
531static void __ei_poll(struct net_device *dev)
532{
Jarek Poplawskif47aeff2008-09-30 20:58:25 +0000533 disable_irq(dev->irq);
Al Viro6c3561b2006-10-10 00:19:36 +0100534 __ei_interrupt(dev->irq, dev);
Jarek Poplawskif47aeff2008-09-30 20:58:25 +0000535 enable_irq(dev->irq);
Al Viro6c3561b2006-10-10 00:19:36 +0100536}
537#endif
538
539/**
540 * ei_tx_err - handle transmitter error
541 * @dev: network device which threw the exception
542 *
543 * A transmitter error has happened. Most likely excess collisions (which
544 * is a fairly normal condition). If the error is one where the Tx will
545 * have been aborted, we try and send another one right away, instead of
546 * letting the failed packet sit and collect dust in the Tx buffer. This
547 * is a much better solution as it avoids kernel based Tx timeouts, and
548 * an unnecessary card reset.
549 *
550 * Called with lock held.
551 */
552
553static void ei_tx_err(struct net_device *dev)
554{
555 unsigned long e8390_base = dev->base_addr;
Stephen Rothwell0c1aa202008-05-29 22:39:28 +1000556 /* ei_local is used on some platforms via the EI_SHIFT macro */
557 struct ei_device *ei_local __maybe_unused = netdev_priv(dev);
Al Viro6c3561b2006-10-10 00:19:36 +0100558 unsigned char txsr = ei_inb_p(e8390_base+EN0_TSR);
559 unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU);
560
561#ifdef VERBOSE_ERROR_DUMP
562 printk(KERN_DEBUG "%s: transmitter error (%#2x): ", dev->name, txsr);
563 if (txsr & ENTSR_ABT)
564 printk("excess-collisions ");
565 if (txsr & ENTSR_ND)
566 printk("non-deferral ");
567 if (txsr & ENTSR_CRS)
568 printk("lost-carrier ");
569 if (txsr & ENTSR_FU)
570 printk("FIFO-underrun ");
571 if (txsr & ENTSR_CDH)
572 printk("lost-heartbeat ");
573 printk("\n");
574#endif
575
576 ei_outb_p(ENISR_TX_ERR, e8390_base + EN0_ISR); /* Ack intr. */
577
578 if (tx_was_aborted)
579 ei_tx_intr(dev);
580 else
581 {
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300582 dev->stats.tx_errors++;
583 if (txsr & ENTSR_CRS) dev->stats.tx_carrier_errors++;
584 if (txsr & ENTSR_CDH) dev->stats.tx_heartbeat_errors++;
585 if (txsr & ENTSR_OWC) dev->stats.tx_window_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100586 }
587}
588
589/**
590 * ei_tx_intr - transmit interrupt handler
591 * @dev: network device for which tx intr is handled
592 *
593 * We have finished a transmit: check for errors and then trigger the next
594 * packet to be sent. Called with lock held.
595 */
596
597static void ei_tx_intr(struct net_device *dev)
598{
599 unsigned long e8390_base = dev->base_addr;
600 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
601 int status = ei_inb(e8390_base + EN0_TSR);
602
603 ei_outb_p(ENISR_TX, e8390_base + EN0_ISR); /* Ack intr. */
604
605 /*
606 * There are two Tx buffers, see which one finished, and trigger
607 * the send of another one if it exists.
608 */
609 ei_local->txqueue--;
610
611 if (ei_local->tx1 < 0)
612 {
613 if (ei_local->lasttx != 1 && ei_local->lasttx != -1)
614 printk(KERN_ERR "%s: bogus last_tx_buffer %d, tx1=%d.\n",
615 ei_local->name, ei_local->lasttx, ei_local->tx1);
616 ei_local->tx1 = 0;
617 if (ei_local->tx2 > 0)
618 {
619 ei_local->txing = 1;
620 NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6);
621 dev->trans_start = jiffies;
622 ei_local->tx2 = -1,
623 ei_local->lasttx = 2;
624 }
625 else ei_local->lasttx = 20, ei_local->txing = 0;
626 }
627 else if (ei_local->tx2 < 0)
628 {
629 if (ei_local->lasttx != 2 && ei_local->lasttx != -2)
630 printk("%s: bogus last_tx_buffer %d, tx2=%d.\n",
631 ei_local->name, ei_local->lasttx, ei_local->tx2);
632 ei_local->tx2 = 0;
633 if (ei_local->tx1 > 0)
634 {
635 ei_local->txing = 1;
636 NS8390_trigger_send(dev, ei_local->tx1, ei_local->tx_start_page);
637 dev->trans_start = jiffies;
638 ei_local->tx1 = -1;
639 ei_local->lasttx = 1;
640 }
641 else
642 ei_local->lasttx = 10, ei_local->txing = 0;
643 }
644// else printk(KERN_WARNING "%s: unexpected TX-done interrupt, lasttx=%d.\n",
645// dev->name, ei_local->lasttx);
646
647 /* Minimize Tx latency: update the statistics after we restart TXing. */
648 if (status & ENTSR_COL)
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300649 dev->stats.collisions++;
Al Viro6c3561b2006-10-10 00:19:36 +0100650 if (status & ENTSR_PTX)
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300651 dev->stats.tx_packets++;
Al Viro6c3561b2006-10-10 00:19:36 +0100652 else
653 {
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300654 dev->stats.tx_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100655 if (status & ENTSR_ABT)
656 {
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300657 dev->stats.tx_aborted_errors++;
658 dev->stats.collisions += 16;
Al Viro6c3561b2006-10-10 00:19:36 +0100659 }
660 if (status & ENTSR_CRS)
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300661 dev->stats.tx_carrier_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100662 if (status & ENTSR_FU)
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300663 dev->stats.tx_fifo_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100664 if (status & ENTSR_CDH)
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300665 dev->stats.tx_heartbeat_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100666 if (status & ENTSR_OWC)
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300667 dev->stats.tx_window_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100668 }
669 netif_wake_queue(dev);
670}
671
672/**
673 * ei_receive - receive some packets
674 * @dev: network device with which receive will be run
675 *
676 * We have a good packet(s), get it/them out of the buffers.
677 * Called with lock held.
678 */
679
680static void ei_receive(struct net_device *dev)
681{
682 unsigned long e8390_base = dev->base_addr;
683 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
684 unsigned char rxing_page, this_frame, next_frame;
685 unsigned short current_offset;
686 int rx_pkt_count = 0;
687 struct e8390_pkt_hdr rx_frame;
688 int num_rx_pages = ei_local->stop_page-ei_local->rx_start_page;
689
690 while (++rx_pkt_count < 10)
691 {
692 int pkt_len, pkt_stat;
693
694 /* Get the rx page (incoming packet pointer). */
695 ei_outb_p(E8390_NODMA+E8390_PAGE1, e8390_base + E8390_CMD);
696 rxing_page = ei_inb_p(e8390_base + EN1_CURPAG);
697 ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD);
698
699 /* Remove one frame from the ring. Boundary is always a page behind. */
700 this_frame = ei_inb_p(e8390_base + EN0_BOUNDARY) + 1;
701 if (this_frame >= ei_local->stop_page)
702 this_frame = ei_local->rx_start_page;
703
704 /* Someday we'll omit the previous, iff we never get this message.
705 (There is at least one clone claimed to have a problem.)
706
707 Keep quiet if it looks like a card removal. One problem here
708 is that some clones crash in roughly the same way.
709 */
710 if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF))
711 printk(KERN_ERR "%s: mismatched read page pointers %2x vs %2x.\n",
712 dev->name, this_frame, ei_local->current_page);
713
714 if (this_frame == rxing_page) /* Read all the frames? */
715 break; /* Done for now */
716
717 current_offset = this_frame << 8;
718 ei_get_8390_hdr(dev, &rx_frame, this_frame);
719
720 pkt_len = rx_frame.count - sizeof(struct e8390_pkt_hdr);
721 pkt_stat = rx_frame.status;
722
723 next_frame = this_frame + 1 + ((pkt_len+4)>>8);
724
725 /* Check for bogosity warned by 3c503 book: the status byte is never
726 written. This happened a lot during testing! This code should be
727 cleaned up someday. */
728 if (rx_frame.next != next_frame
729 && rx_frame.next != next_frame + 1
730 && rx_frame.next != next_frame - num_rx_pages
731 && rx_frame.next != next_frame + 1 - num_rx_pages) {
732 ei_local->current_page = rxing_page;
733 ei_outb(ei_local->current_page-1, e8390_base+EN0_BOUNDARY);
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300734 dev->stats.rx_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100735 continue;
736 }
737
738 if (pkt_len < 60 || pkt_len > 1518)
739 {
740 if (ei_debug)
741 printk(KERN_DEBUG "%s: bogus packet size: %d, status=%#2x nxpg=%#2x.\n",
742 dev->name, rx_frame.count, rx_frame.status,
743 rx_frame.next);
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300744 dev->stats.rx_errors++;
745 dev->stats.rx_length_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100746 }
747 else if ((pkt_stat & 0x0F) == ENRSR_RXOK)
748 {
749 struct sk_buff *skb;
750
751 skb = dev_alloc_skb(pkt_len+2);
752 if (skb == NULL)
753 {
754 if (ei_debug > 1)
755 printk(KERN_DEBUG "%s: Couldn't allocate a sk_buff of size %d.\n",
756 dev->name, pkt_len);
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300757 dev->stats.rx_dropped++;
Al Viro6c3561b2006-10-10 00:19:36 +0100758 break;
759 }
760 else
761 {
762 skb_reserve(skb,2); /* IP headers on 16 byte boundaries */
Al Viro6c3561b2006-10-10 00:19:36 +0100763 skb_put(skb, pkt_len); /* Make room */
764 ei_block_input(dev, pkt_len, skb, current_offset + sizeof(rx_frame));
765 skb->protocol=eth_type_trans(skb,dev);
766 netif_rx(skb);
767 dev->last_rx = jiffies;
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300768 dev->stats.rx_packets++;
769 dev->stats.rx_bytes += pkt_len;
Al Viro6c3561b2006-10-10 00:19:36 +0100770 if (pkt_stat & ENRSR_PHY)
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300771 dev->stats.multicast++;
Al Viro6c3561b2006-10-10 00:19:36 +0100772 }
773 }
774 else
775 {
776 if (ei_debug)
777 printk(KERN_DEBUG "%s: bogus packet: status=%#2x nxpg=%#2x size=%d\n",
778 dev->name, rx_frame.status, rx_frame.next,
779 rx_frame.count);
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300780 dev->stats.rx_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100781 /* NB: The NIC counts CRC, frame and missed errors. */
782 if (pkt_stat & ENRSR_FO)
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300783 dev->stats.rx_fifo_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100784 }
785 next_frame = rx_frame.next;
786
787 /* This _should_ never happen: it's here for avoiding bad clones. */
788 if (next_frame >= ei_local->stop_page) {
789 printk("%s: next frame inconsistency, %#2x\n", dev->name,
790 next_frame);
791 next_frame = ei_local->rx_start_page;
792 }
793 ei_local->current_page = next_frame;
794 ei_outb_p(next_frame-1, e8390_base+EN0_BOUNDARY);
795 }
796
797 /* We used to also ack ENISR_OVER here, but that would sometimes mask
798 a real overrun, leaving the 8390 in a stopped state with rec'vr off. */
799 ei_outb_p(ENISR_RX+ENISR_RX_ERR, e8390_base+EN0_ISR);
800 return;
801}
802
803/**
804 * ei_rx_overrun - handle receiver overrun
805 * @dev: network device which threw exception
806 *
807 * We have a receiver overrun: we have to kick the 8390 to get it started
808 * again. Problem is that you have to kick it exactly as NS prescribes in
809 * the updated datasheets, or "the NIC may act in an unpredictable manner."
810 * This includes causing "the NIC to defer indefinitely when it is stopped
811 * on a busy network." Ugh.
812 * Called with lock held. Don't call this with the interrupts off or your
813 * computer will hate you - it takes 10ms or so.
814 */
815
816static void ei_rx_overrun(struct net_device *dev)
817{
818 unsigned long e8390_base = dev->base_addr;
819 unsigned char was_txing, must_resend = 0;
Stephen Rothwell0c1aa202008-05-29 22:39:28 +1000820 /* ei_local is used on some platforms via the EI_SHIFT macro */
821 struct ei_device *ei_local __maybe_unused = netdev_priv(dev);
Al Viro6c3561b2006-10-10 00:19:36 +0100822
823 /*
824 * Record whether a Tx was in progress and then issue the
825 * stop command.
826 */
827 was_txing = ei_inb_p(e8390_base+E8390_CMD) & E8390_TRANS;
828 ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD);
829
830 if (ei_debug > 1)
831 printk(KERN_DEBUG "%s: Receiver overrun.\n", dev->name);
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300832 dev->stats.rx_over_errors++;
Al Viro6c3561b2006-10-10 00:19:36 +0100833
834 /*
835 * Wait a full Tx time (1.2ms) + some guard time, NS says 1.6ms total.
836 * Early datasheets said to poll the reset bit, but now they say that
837 * it "is not a reliable indicator and subsequently should be ignored."
838 * We wait at least 10ms.
839 */
840
841 mdelay(10);
842
843 /*
844 * Reset RBCR[01] back to zero as per magic incantation.
845 */
846 ei_outb_p(0x00, e8390_base+EN0_RCNTLO);
847 ei_outb_p(0x00, e8390_base+EN0_RCNTHI);
848
849 /*
850 * See if any Tx was interrupted or not. According to NS, this
851 * step is vital, and skipping it will cause no end of havoc.
852 */
853
854 if (was_txing)
855 {
856 unsigned char tx_completed = ei_inb_p(e8390_base+EN0_ISR) & (ENISR_TX+ENISR_TX_ERR);
857 if (!tx_completed)
858 must_resend = 1;
859 }
860
861 /*
862 * Have to enter loopback mode and then restart the NIC before
863 * you are allowed to slurp packets up off the ring.
864 */
865 ei_outb_p(E8390_TXOFF, e8390_base + EN0_TXCR);
866 ei_outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, e8390_base + E8390_CMD);
867
868 /*
869 * Clear the Rx ring of all the debris, and ack the interrupt.
870 */
871 ei_receive(dev);
872 ei_outb_p(ENISR_OVER, e8390_base+EN0_ISR);
873
874 /*
875 * Leave loopback mode, and resend any packet that got stopped.
876 */
877 ei_outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR);
878 if (must_resend)
879 ei_outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START + E8390_TRANS, e8390_base + E8390_CMD);
880}
881
882/*
883 * Collect the stats. This is called unlocked and from several contexts.
884 */
885
886static struct net_device_stats *get_stats(struct net_device *dev)
887{
888 unsigned long ioaddr = dev->base_addr;
889 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
890 unsigned long flags;
891
892 /* If the card is stopped, just return the present stats. */
893 if (!netif_running(dev))
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300894 return &dev->stats;
Al Viro6c3561b2006-10-10 00:19:36 +0100895
896 spin_lock_irqsave(&ei_local->page_lock,flags);
897 /* Read the counter registers, assuming we are in page 0. */
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300898 dev->stats.rx_frame_errors += ei_inb_p(ioaddr + EN0_COUNTER0);
899 dev->stats.rx_crc_errors += ei_inb_p(ioaddr + EN0_COUNTER1);
900 dev->stats.rx_missed_errors+= ei_inb_p(ioaddr + EN0_COUNTER2);
Al Viro6c3561b2006-10-10 00:19:36 +0100901 spin_unlock_irqrestore(&ei_local->page_lock, flags);
902
Paulius Zaleckas244d74f2008-05-07 02:20:40 +0300903 return &dev->stats;
Al Viro6c3561b2006-10-10 00:19:36 +0100904}
905
906/*
907 * Form the 64 bit 8390 multicast table from the linked list of addresses
908 * associated with this dev structure.
909 */
910
911static inline void make_mc_bits(u8 *bits, struct net_device *dev)
912{
913 struct dev_mc_list *dmi;
914
915 for (dmi=dev->mc_list; dmi; dmi=dmi->next)
916 {
917 u32 crc;
918 if (dmi->dmi_addrlen != ETH_ALEN)
919 {
920 printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name);
921 continue;
922 }
923 crc = ether_crc(ETH_ALEN, dmi->dmi_addr);
924 /*
925 * The 8390 uses the 6 most significant bits of the
926 * CRC to index the multicast table.
927 */
928 bits[crc>>29] |= (1<<((crc>>26)&7));
929 }
930}
931
932/**
933 * do_set_multicast_list - set/clear multicast filter
934 * @dev: net device for which multicast filter is adjusted
935 *
936 * Set or clear the multicast filter for this adaptor. May be called
937 * from a BH in 2.1.x. Must be called with lock held.
938 */
939
940static void do_set_multicast_list(struct net_device *dev)
941{
942 unsigned long e8390_base = dev->base_addr;
943 int i;
944 struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev);
945
946 if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI)))
947 {
948 memset(ei_local->mcfilter, 0, 8);
949 if (dev->mc_list)
950 make_mc_bits(ei_local->mcfilter, dev);
951 }
952 else
953 memset(ei_local->mcfilter, 0xFF, 8); /* mcast set to accept-all */
954
955 /*
956 * DP8390 manuals don't specify any magic sequence for altering
957 * the multicast regs on an already running card. To be safe, we
958 * ensure multicast mode is off prior to loading up the new hash
959 * table. If this proves to be not enough, we can always resort
960 * to stopping the NIC, loading the table and then restarting.
961 *
962 * Bug Alert! The MC regs on the SMC 83C690 (SMC Elite and SMC
963 * Elite16) appear to be write-only. The NS 8390 data sheet lists
964 * them as r/w so this is a bug. The SMC 83C790 (SMC Ultra and
965 * Ultra32 EISA) appears to have this bug fixed.
966 */
967
968 if (netif_running(dev))
969 ei_outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
970 ei_outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
971 for(i = 0; i < 8; i++)
972 {
973 ei_outb_p(ei_local->mcfilter[i], e8390_base + EN1_MULT_SHIFT(i));
974#ifndef BUG_83C690
975 if(ei_inb_p(e8390_base + EN1_MULT_SHIFT(i))!=ei_local->mcfilter[i])
976 printk(KERN_ERR "Multicast filter read/write mismap %d\n",i);
977#endif
978 }
979 ei_outb_p(E8390_NODMA + E8390_PAGE0, e8390_base + E8390_CMD);
980
981 if(dev->flags&IFF_PROMISC)
982 ei_outb_p(E8390_RXCONFIG | 0x18, e8390_base + EN0_RXCR);
983 else if(dev->flags&IFF_ALLMULTI || dev->mc_list)
984 ei_outb_p(E8390_RXCONFIG | 0x08, e8390_base + EN0_RXCR);
985 else
986 ei_outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
987 }
988
989/*
990 * Called without lock held. This is invoked from user context and may
991 * be parallel to just about everything else. Its also fairly quick and
992 * not called too often. Must protect against both bh and irq users
993 */
994
995static void set_multicast_list(struct net_device *dev)
996{
997 unsigned long flags;
998 struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev);
999
1000 spin_lock_irqsave(&ei_local->page_lock, flags);
1001 do_set_multicast_list(dev);
1002 spin_unlock_irqrestore(&ei_local->page_lock, flags);
1003}
1004
1005/**
1006 * ethdev_setup - init rest of 8390 device struct
1007 * @dev: network device structure to init
1008 *
1009 * Initialize the rest of the 8390 device structure. Do NOT __init
1010 * this, as it is used by 8390 based modular drivers too.
1011 */
1012
1013static void ethdev_setup(struct net_device *dev)
1014{
1015 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
1016 if (ei_debug > 1)
1017 printk(version);
1018
1019 dev->hard_start_xmit = &ei_start_xmit;
1020 dev->get_stats = get_stats;
1021 dev->set_multicast_list = &set_multicast_list;
1022
1023 ether_setup(dev);
1024
1025 spin_lock_init(&ei_local->page_lock);
1026}
1027
1028/**
1029 * alloc_ei_netdev - alloc_etherdev counterpart for 8390
1030 * @size: extra bytes to allocate
1031 *
1032 * Allocate 8390-specific net_device.
1033 */
1034static struct net_device *____alloc_ei_netdev(int size)
1035{
1036 return alloc_netdev(sizeof(struct ei_device) + size, "eth%d",
1037 ethdev_setup);
1038}
1039
1040
1041
1042
1043/* This page of functions should be 8390 generic */
1044/* Follow National Semi's recommendations for initializing the "NIC". */
1045
1046/**
1047 * NS8390_init - initialize 8390 hardware
1048 * @dev: network device to initialize
1049 * @startp: boolean. non-zero value to initiate chip processing
1050 *
1051 * Must be called with lock held.
1052 */
1053
1054static void __NS8390_init(struct net_device *dev, int startp)
1055{
1056 unsigned long e8390_base = dev->base_addr;
1057 struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
1058 int i;
1059 int endcfg = ei_local->word16
1060 ? (0x48 | ENDCFG_WTS | (ei_local->bigendian ? ENDCFG_BOS : 0))
1061 : 0x48;
1062
1063 if(sizeof(struct e8390_pkt_hdr)!=4)
1064 panic("8390.c: header struct mispacked\n");
1065 /* Follow National Semi's recommendations for initing the DP83902. */
1066 ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); /* 0x21 */
1067 ei_outb_p(endcfg, e8390_base + EN0_DCFG); /* 0x48 or 0x49 */
1068 /* Clear the remote byte count registers. */
1069 ei_outb_p(0x00, e8390_base + EN0_RCNTLO);
1070 ei_outb_p(0x00, e8390_base + EN0_RCNTHI);
1071 /* Set to monitor and loopback mode -- this is vital!. */
1072 ei_outb_p(E8390_RXOFF, e8390_base + EN0_RXCR); /* 0x20 */
1073 ei_outb_p(E8390_TXOFF, e8390_base + EN0_TXCR); /* 0x02 */
1074 /* Set the transmit page and receive ring. */
1075 ei_outb_p(ei_local->tx_start_page, e8390_base + EN0_TPSR);
1076 ei_local->tx1 = ei_local->tx2 = 0;
1077 ei_outb_p(ei_local->rx_start_page, e8390_base + EN0_STARTPG);
1078 ei_outb_p(ei_local->stop_page-1, e8390_base + EN0_BOUNDARY); /* 3c503 says 0x3f,NS0x26*/
1079 ei_local->current_page = ei_local->rx_start_page; /* assert boundary+1 */
1080 ei_outb_p(ei_local->stop_page, e8390_base + EN0_STOPPG);
1081 /* Clear the pending interrupts and mask. */
1082 ei_outb_p(0xFF, e8390_base + EN0_ISR);
1083 ei_outb_p(0x00, e8390_base + EN0_IMR);
1084
1085 /* Copy the station address into the DS8390 registers. */
1086
1087 ei_outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */
1088 for(i = 0; i < 6; i++)
1089 {
1090 ei_outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i));
1091 if (ei_debug > 1 && ei_inb_p(e8390_base + EN1_PHYS_SHIFT(i))!=dev->dev_addr[i])
1092 printk(KERN_ERR "Hw. address read/write mismap %d\n",i);
1093 }
1094
1095 ei_outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG);
1096 ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD);
1097
1098 netif_start_queue(dev);
1099 ei_local->tx1 = ei_local->tx2 = 0;
1100 ei_local->txing = 0;
1101
1102 if (startp)
1103 {
1104 ei_outb_p(0xff, e8390_base + EN0_ISR);
1105 ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR);
1106 ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
1107 ei_outb_p(E8390_TXCONFIG, e8390_base + EN0_TXCR); /* xmit on. */
1108 /* 3c503 TechMan says rxconfig only after the NIC is started. */
1109 ei_outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR); /* rx on, */
1110 do_set_multicast_list(dev); /* (re)load the mcast table */
1111 }
1112}
1113
1114/* Trigger a transmit start, assuming the length is valid.
1115 Always called with the page lock held */
1116
1117static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
1118 int start_page)
1119{
1120 unsigned long e8390_base = dev->base_addr;
1121 struct ei_device *ei_local __attribute((unused)) = (struct ei_device *) netdev_priv(dev);
1122
1123 ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD);
1124
1125 if (ei_inb_p(e8390_base + E8390_CMD) & E8390_TRANS)
1126 {
1127 printk(KERN_WARNING "%s: trigger_send() called with the transmitter busy.\n",
1128 dev->name);
1129 return;
1130 }
1131 ei_outb_p(length & 0xff, e8390_base + EN0_TCNTLO);
1132 ei_outb_p(length >> 8, e8390_base + EN0_TCNTHI);
1133 ei_outb_p(start_page, e8390_base + EN0_TPSR);
1134 ei_outb_p(E8390_NODMA+E8390_TRANS+E8390_START, e8390_base+E8390_CMD);
1135}