Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 1 | /* NXP PCF50633 Power Management Unit (PMU) driver |
| 2 | * |
| 3 | * (C) 2006-2008 by Openmoko, Inc. |
| 4 | * Author: Harald Welte <laforge@openmoko.org> |
| 5 | * Balaji Rao <balajirrao@openmoko.org> |
| 6 | * All rights reserved. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify it |
| 9 | * under the terms of the GNU General Public License as published by the |
| 10 | * Free Software Foundation; either version 2 of the License, or (at your |
| 11 | * option) any later version. |
| 12 | * |
| 13 | */ |
| 14 | |
| 15 | #include <linux/kernel.h> |
| 16 | #include <linux/device.h> |
| 17 | #include <linux/sysfs.h> |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 18 | #include <linux/module.h> |
| 19 | #include <linux/types.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/workqueue.h> |
| 22 | #include <linux/platform_device.h> |
| 23 | #include <linux/i2c.h> |
| 24 | #include <linux/irq.h> |
| 25 | |
| 26 | #include <linux/mfd/pcf50633/core.h> |
| 27 | |
| 28 | /* Two MBCS registers used during cold start */ |
| 29 | #define PCF50633_REG_MBCS1 0x4b |
| 30 | #define PCF50633_REG_MBCS2 0x4c |
| 31 | #define PCF50633_MBCS1_USBPRES 0x01 |
| 32 | #define PCF50633_MBCS1_ADAPTPRES 0x01 |
| 33 | |
| 34 | static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data) |
| 35 | { |
| 36 | int ret; |
| 37 | |
| 38 | ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg, |
| 39 | num, data); |
| 40 | if (ret < 0) |
| 41 | dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg); |
| 42 | |
| 43 | return ret; |
| 44 | } |
| 45 | |
| 46 | static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data) |
| 47 | { |
| 48 | int ret; |
| 49 | |
| 50 | ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg, |
| 51 | num, data); |
| 52 | if (ret < 0) |
| 53 | dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg); |
| 54 | |
| 55 | return ret; |
| 56 | |
| 57 | } |
| 58 | |
| 59 | /* Read a block of upto 32 regs */ |
| 60 | int pcf50633_read_block(struct pcf50633 *pcf, u8 reg, |
| 61 | int nr_regs, u8 *data) |
| 62 | { |
| 63 | int ret; |
| 64 | |
| 65 | mutex_lock(&pcf->lock); |
| 66 | ret = __pcf50633_read(pcf, reg, nr_regs, data); |
| 67 | mutex_unlock(&pcf->lock); |
| 68 | |
| 69 | return ret; |
| 70 | } |
| 71 | EXPORT_SYMBOL_GPL(pcf50633_read_block); |
| 72 | |
| 73 | /* Write a block of upto 32 regs */ |
| 74 | int pcf50633_write_block(struct pcf50633 *pcf , u8 reg, |
| 75 | int nr_regs, u8 *data) |
| 76 | { |
| 77 | int ret; |
| 78 | |
| 79 | mutex_lock(&pcf->lock); |
| 80 | ret = __pcf50633_write(pcf, reg, nr_regs, data); |
| 81 | mutex_unlock(&pcf->lock); |
| 82 | |
| 83 | return ret; |
| 84 | } |
| 85 | EXPORT_SYMBOL_GPL(pcf50633_write_block); |
| 86 | |
| 87 | u8 pcf50633_reg_read(struct pcf50633 *pcf, u8 reg) |
| 88 | { |
| 89 | u8 val; |
| 90 | |
| 91 | mutex_lock(&pcf->lock); |
| 92 | __pcf50633_read(pcf, reg, 1, &val); |
| 93 | mutex_unlock(&pcf->lock); |
| 94 | |
| 95 | return val; |
| 96 | } |
| 97 | EXPORT_SYMBOL_GPL(pcf50633_reg_read); |
| 98 | |
| 99 | int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val) |
| 100 | { |
| 101 | int ret; |
| 102 | |
| 103 | mutex_lock(&pcf->lock); |
| 104 | ret = __pcf50633_write(pcf, reg, 1, &val); |
| 105 | mutex_unlock(&pcf->lock); |
| 106 | |
| 107 | return ret; |
| 108 | } |
| 109 | EXPORT_SYMBOL_GPL(pcf50633_reg_write); |
| 110 | |
| 111 | int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val) |
| 112 | { |
| 113 | int ret; |
| 114 | u8 tmp; |
| 115 | |
| 116 | val &= mask; |
| 117 | |
| 118 | mutex_lock(&pcf->lock); |
| 119 | ret = __pcf50633_read(pcf, reg, 1, &tmp); |
| 120 | if (ret < 0) |
| 121 | goto out; |
| 122 | |
| 123 | tmp &= ~mask; |
| 124 | tmp |= val; |
| 125 | ret = __pcf50633_write(pcf, reg, 1, &tmp); |
| 126 | |
| 127 | out: |
| 128 | mutex_unlock(&pcf->lock); |
| 129 | |
| 130 | return ret; |
| 131 | } |
| 132 | EXPORT_SYMBOL_GPL(pcf50633_reg_set_bit_mask); |
| 133 | |
| 134 | int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 val) |
| 135 | { |
| 136 | int ret; |
| 137 | u8 tmp; |
| 138 | |
| 139 | mutex_lock(&pcf->lock); |
| 140 | ret = __pcf50633_read(pcf, reg, 1, &tmp); |
| 141 | if (ret < 0) |
| 142 | goto out; |
| 143 | |
| 144 | tmp &= ~val; |
| 145 | ret = __pcf50633_write(pcf, reg, 1, &tmp); |
| 146 | |
| 147 | out: |
| 148 | mutex_unlock(&pcf->lock); |
| 149 | |
| 150 | return ret; |
| 151 | } |
| 152 | EXPORT_SYMBOL_GPL(pcf50633_reg_clear_bits); |
| 153 | |
| 154 | /* sysfs attributes */ |
| 155 | static ssize_t show_dump_regs(struct device *dev, struct device_attribute *attr, |
| 156 | char *buf) |
| 157 | { |
| 158 | struct pcf50633 *pcf = dev_get_drvdata(dev); |
| 159 | u8 dump[16]; |
| 160 | int n, n1, idx = 0; |
| 161 | char *buf1 = buf; |
| 162 | static u8 address_no_read[] = { /* must be ascending */ |
| 163 | PCF50633_REG_INT1, |
| 164 | PCF50633_REG_INT2, |
| 165 | PCF50633_REG_INT3, |
| 166 | PCF50633_REG_INT4, |
| 167 | PCF50633_REG_INT5, |
| 168 | 0 /* terminator */ |
| 169 | }; |
| 170 | |
| 171 | for (n = 0; n < 256; n += sizeof(dump)) { |
| 172 | for (n1 = 0; n1 < sizeof(dump); n1++) |
| 173 | if (n == address_no_read[idx]) { |
| 174 | idx++; |
| 175 | dump[n1] = 0x00; |
| 176 | } else |
| 177 | dump[n1] = pcf50633_reg_read(pcf, n + n1); |
| 178 | |
| 179 | hex_dump_to_buffer(dump, sizeof(dump), 16, 1, buf1, 128, 0); |
| 180 | buf1 += strlen(buf1); |
| 181 | *buf1++ = '\n'; |
| 182 | *buf1 = '\0'; |
| 183 | } |
| 184 | |
| 185 | return buf1 - buf; |
| 186 | } |
| 187 | static DEVICE_ATTR(dump_regs, 0400, show_dump_regs, NULL); |
| 188 | |
| 189 | static ssize_t show_resume_reason(struct device *dev, |
| 190 | struct device_attribute *attr, char *buf) |
| 191 | { |
| 192 | struct pcf50633 *pcf = dev_get_drvdata(dev); |
| 193 | int n; |
| 194 | |
| 195 | n = sprintf(buf, "%02x%02x%02x%02x%02x\n", |
| 196 | pcf->resume_reason[0], |
| 197 | pcf->resume_reason[1], |
| 198 | pcf->resume_reason[2], |
| 199 | pcf->resume_reason[3], |
| 200 | pcf->resume_reason[4]); |
| 201 | |
| 202 | return n; |
| 203 | } |
| 204 | static DEVICE_ATTR(resume_reason, 0400, show_resume_reason, NULL); |
| 205 | |
| 206 | static struct attribute *pcf_sysfs_entries[] = { |
| 207 | &dev_attr_dump_regs.attr, |
| 208 | &dev_attr_resume_reason.attr, |
| 209 | NULL, |
| 210 | }; |
| 211 | |
| 212 | static struct attribute_group pcf_attr_group = { |
| 213 | .name = NULL, /* put in device directory */ |
| 214 | .attrs = pcf_sysfs_entries, |
| 215 | }; |
| 216 | |
| 217 | int pcf50633_register_irq(struct pcf50633 *pcf, int irq, |
| 218 | void (*handler) (int, void *), void *data) |
| 219 | { |
| 220 | if (irq < 0 || irq > PCF50633_NUM_IRQ || !handler) |
| 221 | return -EINVAL; |
| 222 | |
| 223 | if (WARN_ON(pcf->irq_handler[irq].handler)) |
| 224 | return -EBUSY; |
| 225 | |
| 226 | mutex_lock(&pcf->lock); |
| 227 | pcf->irq_handler[irq].handler = handler; |
| 228 | pcf->irq_handler[irq].data = data; |
| 229 | mutex_unlock(&pcf->lock); |
| 230 | |
| 231 | return 0; |
| 232 | } |
| 233 | EXPORT_SYMBOL_GPL(pcf50633_register_irq); |
| 234 | |
| 235 | int pcf50633_free_irq(struct pcf50633 *pcf, int irq) |
| 236 | { |
| 237 | if (irq < 0 || irq > PCF50633_NUM_IRQ) |
| 238 | return -EINVAL; |
| 239 | |
| 240 | mutex_lock(&pcf->lock); |
| 241 | pcf->irq_handler[irq].handler = NULL; |
| 242 | mutex_unlock(&pcf->lock); |
| 243 | |
| 244 | return 0; |
| 245 | } |
| 246 | EXPORT_SYMBOL_GPL(pcf50633_free_irq); |
| 247 | |
| 248 | static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask) |
| 249 | { |
| 250 | u8 reg, bits, tmp; |
| 251 | int ret = 0, idx; |
| 252 | |
| 253 | idx = irq >> 3; |
| 254 | reg = PCF50633_REG_INT1M + idx; |
| 255 | bits = 1 << (irq & 0x07); |
| 256 | |
| 257 | mutex_lock(&pcf->lock); |
| 258 | |
| 259 | if (mask) { |
| 260 | ret = __pcf50633_read(pcf, reg, 1, &tmp); |
| 261 | if (ret < 0) |
| 262 | goto out; |
| 263 | |
| 264 | tmp |= bits; |
| 265 | |
| 266 | ret = __pcf50633_write(pcf, reg, 1, &tmp); |
| 267 | if (ret < 0) |
| 268 | goto out; |
| 269 | |
| 270 | pcf->mask_regs[idx] &= ~bits; |
| 271 | pcf->mask_regs[idx] |= bits; |
| 272 | } else { |
| 273 | ret = __pcf50633_read(pcf, reg, 1, &tmp); |
| 274 | if (ret < 0) |
| 275 | goto out; |
| 276 | |
| 277 | tmp &= ~bits; |
| 278 | |
| 279 | ret = __pcf50633_write(pcf, reg, 1, &tmp); |
| 280 | if (ret < 0) |
| 281 | goto out; |
| 282 | |
| 283 | pcf->mask_regs[idx] &= ~bits; |
| 284 | } |
| 285 | out: |
| 286 | mutex_unlock(&pcf->lock); |
| 287 | |
| 288 | return ret; |
| 289 | } |
| 290 | |
| 291 | int pcf50633_irq_mask(struct pcf50633 *pcf, int irq) |
| 292 | { |
Arnaud Patard | b18fdc4 | 2009-10-14 02:12:32 +0400 | [diff] [blame] | 293 | dev_dbg(pcf->dev, "Masking IRQ %d\n", irq); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 294 | |
| 295 | return __pcf50633_irq_mask_set(pcf, irq, 1); |
| 296 | } |
| 297 | EXPORT_SYMBOL_GPL(pcf50633_irq_mask); |
| 298 | |
| 299 | int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq) |
| 300 | { |
Arnaud Patard | b18fdc4 | 2009-10-14 02:12:32 +0400 | [diff] [blame] | 301 | dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 302 | |
| 303 | return __pcf50633_irq_mask_set(pcf, irq, 0); |
| 304 | } |
| 305 | EXPORT_SYMBOL_GPL(pcf50633_irq_unmask); |
| 306 | |
| 307 | int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq) |
| 308 | { |
| 309 | u8 reg, bits; |
| 310 | |
| 311 | reg = irq >> 3; |
| 312 | bits = 1 << (irq & 0x07); |
| 313 | |
| 314 | return pcf->mask_regs[reg] & bits; |
| 315 | } |
| 316 | EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get); |
| 317 | |
| 318 | static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq) |
| 319 | { |
| 320 | if (pcf->irq_handler[irq].handler) |
| 321 | pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data); |
| 322 | } |
| 323 | |
| 324 | /* Maximum amount of time ONKEY is held before emergency action is taken */ |
| 325 | #define PCF50633_ONKEY1S_TIMEOUT 8 |
| 326 | |
| 327 | static void pcf50633_irq_worker(struct work_struct *work) |
| 328 | { |
| 329 | struct pcf50633 *pcf; |
| 330 | int ret, i, j; |
| 331 | u8 pcf_int[5], chgstat; |
| 332 | |
| 333 | pcf = container_of(work, struct pcf50633, irq_work); |
| 334 | |
| 335 | /* Read the 5 INT regs in one transaction */ |
| 336 | ret = pcf50633_read_block(pcf, PCF50633_REG_INT1, |
| 337 | ARRAY_SIZE(pcf_int), pcf_int); |
| 338 | if (ret != ARRAY_SIZE(pcf_int)) { |
| 339 | dev_err(pcf->dev, "Error reading INT registers\n"); |
| 340 | |
| 341 | /* |
| 342 | * If this doesn't ACK the interrupt to the chip, we'll be |
| 343 | * called once again as we're level triggered. |
| 344 | */ |
| 345 | goto out; |
| 346 | } |
| 347 | |
Paul Fertser | 06b1cc9 | 2009-10-14 02:12:30 +0400 | [diff] [blame] | 348 | /* defeat 8s death from lowsys on A5 */ |
| 349 | pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04); |
| 350 | |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 351 | /* We immediately read the usb and adapter status. We thus make sure |
| 352 | * only of USBINS/USBREM IRQ handlers are called */ |
| 353 | if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) { |
| 354 | chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); |
| 355 | if (chgstat & (0x3 << 4)) |
| 356 | pcf_int[0] &= ~(1 << PCF50633_INT1_USBREM); |
| 357 | else |
| 358 | pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS); |
| 359 | } |
| 360 | |
| 361 | /* Make sure only one of ADPINS or ADPREM is set */ |
| 362 | if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) { |
| 363 | chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); |
| 364 | if (chgstat & (0x3 << 4)) |
| 365 | pcf_int[0] &= ~(1 << PCF50633_INT1_ADPREM); |
| 366 | else |
| 367 | pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS); |
| 368 | } |
| 369 | |
| 370 | dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x " |
| 371 | "INT4=0x%02x INT5=0x%02x\n", pcf_int[0], |
| 372 | pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]); |
| 373 | |
| 374 | /* Some revisions of the chip don't have a 8s standby mode on |
| 375 | * ONKEY1S press. We try to manually do it in such cases. */ |
| 376 | if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) { |
| 377 | dev_info(pcf->dev, "ONKEY1S held for %d secs\n", |
| 378 | pcf->onkey1s_held); |
| 379 | if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT) |
| 380 | if (pcf->pdata->force_shutdown) |
| 381 | pcf->pdata->force_shutdown(pcf); |
| 382 | } |
| 383 | |
| 384 | if (pcf_int[2] & PCF50633_INT3_ONKEY1S) { |
| 385 | dev_info(pcf->dev, "ONKEY1S held\n"); |
| 386 | pcf->onkey1s_held = 1 ; |
| 387 | |
| 388 | /* Unmask IRQ_SECOND */ |
| 389 | pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M, |
| 390 | PCF50633_INT1_SECOND); |
| 391 | |
| 392 | /* Unmask IRQ_ONKEYR */ |
| 393 | pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M, |
| 394 | PCF50633_INT2_ONKEYR); |
| 395 | } |
| 396 | |
| 397 | if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) { |
| 398 | pcf->onkey1s_held = 0; |
| 399 | |
| 400 | /* Mask SECOND and ONKEYR interrupts */ |
| 401 | if (pcf->mask_regs[0] & PCF50633_INT1_SECOND) |
| 402 | pcf50633_reg_set_bit_mask(pcf, |
| 403 | PCF50633_REG_INT1M, |
| 404 | PCF50633_INT1_SECOND, |
| 405 | PCF50633_INT1_SECOND); |
| 406 | |
| 407 | if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR) |
| 408 | pcf50633_reg_set_bit_mask(pcf, |
| 409 | PCF50633_REG_INT2M, |
| 410 | PCF50633_INT2_ONKEYR, |
| 411 | PCF50633_INT2_ONKEYR); |
| 412 | } |
| 413 | |
| 414 | /* Have we just resumed ? */ |
| 415 | if (pcf->is_suspended) { |
| 416 | pcf->is_suspended = 0; |
| 417 | |
| 418 | /* Set the resume reason filtering out non resumers */ |
| 419 | for (i = 0; i < ARRAY_SIZE(pcf_int); i++) |
| 420 | pcf->resume_reason[i] = pcf_int[i] & |
| 421 | pcf->pdata->resumers[i]; |
| 422 | |
| 423 | /* Make sure we don't pass on any ONKEY events to |
| 424 | * userspace now */ |
| 425 | pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF); |
| 426 | } |
| 427 | |
| 428 | for (i = 0; i < ARRAY_SIZE(pcf_int); i++) { |
| 429 | /* Unset masked interrupts */ |
| 430 | pcf_int[i] &= ~pcf->mask_regs[i]; |
| 431 | |
| 432 | for (j = 0; j < 8 ; j++) |
| 433 | if (pcf_int[i] & (1 << j)) |
| 434 | pcf50633_irq_call_handler(pcf, (i * 8) + j); |
| 435 | } |
| 436 | |
| 437 | out: |
| 438 | put_device(pcf->dev); |
| 439 | enable_irq(pcf->irq); |
| 440 | } |
| 441 | |
| 442 | static irqreturn_t pcf50633_irq(int irq, void *data) |
| 443 | { |
| 444 | struct pcf50633 *pcf = data; |
| 445 | |
| 446 | dev_dbg(pcf->dev, "pcf50633_irq\n"); |
| 447 | |
| 448 | get_device(pcf->dev); |
Nelson Castillo | f43ab90 | 2009-05-12 13:26:47 -0700 | [diff] [blame] | 449 | disable_irq_nosync(pcf->irq); |
Paul Fertser | ed52e62 | 2009-07-28 00:41:15 +0400 | [diff] [blame] | 450 | queue_work(pcf->work_queue, &pcf->irq_work); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 451 | |
| 452 | return IRQ_HANDLED; |
| 453 | } |
| 454 | |
| 455 | static void |
| 456 | pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name, |
| 457 | struct platform_device **pdev) |
| 458 | { |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 459 | int ret; |
| 460 | |
| 461 | *pdev = platform_device_alloc(name, -1); |
| 462 | if (!*pdev) { |
| 463 | dev_err(pcf->dev, "Falied to allocate %s\n", name); |
| 464 | return; |
| 465 | } |
| 466 | |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 467 | (*pdev)->dev.parent = pcf->dev; |
| 468 | |
| 469 | ret = platform_device_add(*pdev); |
| 470 | if (ret) { |
| 471 | dev_err(pcf->dev, "Failed to register %s: %d\n", name, ret); |
| 472 | platform_device_put(*pdev); |
| 473 | *pdev = NULL; |
| 474 | } |
| 475 | } |
| 476 | |
| 477 | #ifdef CONFIG_PM |
Lars-Peter Clausen | 25993e4 | 2009-10-14 02:12:31 +0400 | [diff] [blame] | 478 | static int pcf50633_suspend(struct i2c_client *client, pm_message_t state) |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 479 | { |
| 480 | struct pcf50633 *pcf; |
| 481 | int ret = 0, i; |
| 482 | u8 res[5]; |
| 483 | |
Lars-Peter Clausen | 25993e4 | 2009-10-14 02:12:31 +0400 | [diff] [blame] | 484 | pcf = i2c_get_clientdata(client); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 485 | |
| 486 | /* Make sure our interrupt handlers are not called |
| 487 | * henceforth */ |
| 488 | disable_irq(pcf->irq); |
| 489 | |
| 490 | /* Make sure that any running IRQ worker has quit */ |
| 491 | cancel_work_sync(&pcf->irq_work); |
| 492 | |
| 493 | /* Save the masks */ |
| 494 | ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M, |
| 495 | ARRAY_SIZE(pcf->suspend_irq_masks), |
| 496 | pcf->suspend_irq_masks); |
| 497 | if (ret < 0) { |
| 498 | dev_err(pcf->dev, "error saving irq masks\n"); |
| 499 | goto out; |
| 500 | } |
| 501 | |
| 502 | /* Write wakeup irq masks */ |
| 503 | for (i = 0; i < ARRAY_SIZE(res); i++) |
| 504 | res[i] = ~pcf->pdata->resumers[i]; |
| 505 | |
| 506 | ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M, |
| 507 | ARRAY_SIZE(res), &res[0]); |
| 508 | if (ret < 0) { |
| 509 | dev_err(pcf->dev, "error writing wakeup irq masks\n"); |
| 510 | goto out; |
| 511 | } |
| 512 | |
| 513 | pcf->is_suspended = 1; |
| 514 | |
| 515 | out: |
| 516 | return ret; |
| 517 | } |
| 518 | |
Lars-Peter Clausen | 25993e4 | 2009-10-14 02:12:31 +0400 | [diff] [blame] | 519 | static int pcf50633_resume(struct i2c_client *client) |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 520 | { |
| 521 | struct pcf50633 *pcf; |
| 522 | int ret; |
| 523 | |
Lars-Peter Clausen | 25993e4 | 2009-10-14 02:12:31 +0400 | [diff] [blame] | 524 | pcf = i2c_get_clientdata(client); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 525 | |
| 526 | /* Write the saved mask registers */ |
| 527 | ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M, |
| 528 | ARRAY_SIZE(pcf->suspend_irq_masks), |
| 529 | pcf->suspend_irq_masks); |
| 530 | if (ret < 0) |
| 531 | dev_err(pcf->dev, "Error restoring saved suspend masks\n"); |
| 532 | |
| 533 | /* Restore regulators' state */ |
| 534 | |
| 535 | |
| 536 | get_device(pcf->dev); |
| 537 | |
| 538 | /* |
| 539 | * Clear any pending interrupts and set resume reason if any. |
| 540 | * This will leave with enable_irq() |
| 541 | */ |
| 542 | pcf50633_irq_worker(&pcf->irq_work); |
| 543 | |
| 544 | return 0; |
| 545 | } |
| 546 | #else |
| 547 | #define pcf50633_suspend NULL |
| 548 | #define pcf50633_resume NULL |
| 549 | #endif |
| 550 | |
| 551 | static int __devinit pcf50633_probe(struct i2c_client *client, |
| 552 | const struct i2c_device_id *ids) |
| 553 | { |
| 554 | struct pcf50633 *pcf; |
| 555 | struct pcf50633_platform_data *pdata = client->dev.platform_data; |
Lars-Peter Clausen | 24213ae | 2009-10-08 00:24:54 +0200 | [diff] [blame] | 556 | int i, ret; |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 557 | int version, variant; |
| 558 | |
Lars-Peter Clausen | 24213ae | 2009-10-08 00:24:54 +0200 | [diff] [blame] | 559 | if (!client->irq) { |
| 560 | dev_err(&client->dev, "Missing IRQ\n"); |
| 561 | return -ENOENT; |
| 562 | } |
| 563 | |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 564 | pcf = kzalloc(sizeof(*pcf), GFP_KERNEL); |
| 565 | if (!pcf) |
| 566 | return -ENOMEM; |
| 567 | |
| 568 | pcf->pdata = pdata; |
| 569 | |
| 570 | mutex_init(&pcf->lock); |
| 571 | |
| 572 | i2c_set_clientdata(client, pcf); |
| 573 | pcf->dev = &client->dev; |
| 574 | pcf->i2c_client = client; |
| 575 | pcf->irq = client->irq; |
Paul Fertser | ed52e62 | 2009-07-28 00:41:15 +0400 | [diff] [blame] | 576 | pcf->work_queue = create_singlethread_workqueue("pcf50633"); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 577 | |
Lars-Peter Clausen | 24213ae | 2009-10-08 00:24:54 +0200 | [diff] [blame] | 578 | if (!pcf->work_queue) { |
| 579 | dev_err(&client->dev, "Failed to alloc workqueue\n"); |
| 580 | ret = -ENOMEM; |
| 581 | goto err_free; |
| 582 | } |
| 583 | |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 584 | INIT_WORK(&pcf->irq_work, pcf50633_irq_worker); |
| 585 | |
| 586 | version = pcf50633_reg_read(pcf, 0); |
| 587 | variant = pcf50633_reg_read(pcf, 1); |
| 588 | if (version < 0 || variant < 0) { |
| 589 | dev_err(pcf->dev, "Unable to probe pcf50633\n"); |
| 590 | ret = -ENODEV; |
Lars-Peter Clausen | 24213ae | 2009-10-08 00:24:54 +0200 | [diff] [blame] | 591 | goto err_destroy_workqueue; |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 592 | } |
| 593 | |
| 594 | dev_info(pcf->dev, "Probed device version %d variant %d\n", |
| 595 | version, variant); |
| 596 | |
| 597 | /* Enable all interrupts except RTC SECOND */ |
| 598 | pcf->mask_regs[0] = 0x80; |
| 599 | pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]); |
| 600 | pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00); |
| 601 | pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00); |
| 602 | pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00); |
| 603 | pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00); |
| 604 | |
Lars-Peter Clausen | 24213ae | 2009-10-08 00:24:54 +0200 | [diff] [blame] | 605 | ret = request_irq(client->irq, pcf50633_irq, |
| 606 | IRQF_TRIGGER_LOW, "pcf50633", pcf); |
| 607 | |
| 608 | if (ret) { |
| 609 | dev_err(pcf->dev, "Failed to request IRQ %d\n", ret); |
| 610 | goto err_destroy_workqueue; |
| 611 | } |
| 612 | |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 613 | /* Create sub devices */ |
| 614 | pcf50633_client_dev_register(pcf, "pcf50633-input", |
| 615 | &pcf->input_pdev); |
| 616 | pcf50633_client_dev_register(pcf, "pcf50633-rtc", |
| 617 | &pcf->rtc_pdev); |
| 618 | pcf50633_client_dev_register(pcf, "pcf50633-mbc", |
| 619 | &pcf->mbc_pdev); |
| 620 | pcf50633_client_dev_register(pcf, "pcf50633-adc", |
| 621 | &pcf->adc_pdev); |
| 622 | |
| 623 | for (i = 0; i < PCF50633_NUM_REGULATORS; i++) { |
| 624 | struct platform_device *pdev; |
| 625 | |
| 626 | pdev = platform_device_alloc("pcf50633-regltr", i); |
| 627 | if (!pdev) { |
Lars-Peter Clausen | 24213ae | 2009-10-08 00:24:54 +0200 | [diff] [blame] | 628 | dev_err(pcf->dev, "Cannot create regulator %d\n", i); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 629 | continue; |
| 630 | } |
| 631 | |
| 632 | pdev->dev.parent = pcf->dev; |
Lars-Peter Clausen | bbb2e49 | 2009-10-14 02:12:35 +0400 | [diff] [blame] | 633 | platform_device_add_data(pdev, &pdata->reg_init_data[i], |
| 634 | sizeof(pdata->reg_init_data[i])); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 635 | pcf->regulator_pdev[i] = pdev; |
| 636 | |
| 637 | platform_device_add(pdev); |
| 638 | } |
| 639 | |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 640 | if (enable_irq_wake(client->irq) < 0) |
| 641 | dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source" |
| 642 | "in this hardware revision", client->irq); |
| 643 | |
| 644 | ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group); |
| 645 | if (ret) |
| 646 | dev_err(pcf->dev, "error creating sysfs entries\n"); |
| 647 | |
| 648 | if (pdata->probe_done) |
| 649 | pdata->probe_done(pcf); |
| 650 | |
| 651 | return 0; |
| 652 | |
Lars-Peter Clausen | 24213ae | 2009-10-08 00:24:54 +0200 | [diff] [blame] | 653 | err_destroy_workqueue: |
Paul Fertser | ed52e62 | 2009-07-28 00:41:15 +0400 | [diff] [blame] | 654 | destroy_workqueue(pcf->work_queue); |
Lars-Peter Clausen | 24213ae | 2009-10-08 00:24:54 +0200 | [diff] [blame] | 655 | err_free: |
| 656 | i2c_set_clientdata(client, NULL); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 657 | kfree(pcf); |
Lars-Peter Clausen | 24213ae | 2009-10-08 00:24:54 +0200 | [diff] [blame] | 658 | |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 659 | return ret; |
| 660 | } |
| 661 | |
| 662 | static int __devexit pcf50633_remove(struct i2c_client *client) |
| 663 | { |
| 664 | struct pcf50633 *pcf = i2c_get_clientdata(client); |
| 665 | int i; |
| 666 | |
| 667 | free_irq(pcf->irq, pcf); |
Paul Fertser | ed52e62 | 2009-07-28 00:41:15 +0400 | [diff] [blame] | 668 | destroy_workqueue(pcf->work_queue); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 669 | |
| 670 | platform_device_unregister(pcf->input_pdev); |
| 671 | platform_device_unregister(pcf->rtc_pdev); |
| 672 | platform_device_unregister(pcf->mbc_pdev); |
| 673 | platform_device_unregister(pcf->adc_pdev); |
| 674 | |
| 675 | for (i = 0; i < PCF50633_NUM_REGULATORS; i++) |
| 676 | platform_device_unregister(pcf->regulator_pdev[i]); |
| 677 | |
| 678 | kfree(pcf); |
| 679 | |
| 680 | return 0; |
| 681 | } |
| 682 | |
| 683 | static struct i2c_device_id pcf50633_id_table[] = { |
| 684 | {"pcf50633", 0x73}, |
Jean Delvare | 8915e54 | 2009-02-17 09:07:02 +0100 | [diff] [blame] | 685 | {/* end of list */} |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 686 | }; |
| 687 | |
| 688 | static struct i2c_driver pcf50633_driver = { |
| 689 | .driver = { |
| 690 | .name = "pcf50633", |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 691 | }, |
| 692 | .id_table = pcf50633_id_table, |
| 693 | .probe = pcf50633_probe, |
| 694 | .remove = __devexit_p(pcf50633_remove), |
Lars-Peter Clausen | 25993e4 | 2009-10-14 02:12:31 +0400 | [diff] [blame] | 695 | .suspend = pcf50633_suspend, |
| 696 | .resume = pcf50633_resume, |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 697 | }; |
| 698 | |
| 699 | static int __init pcf50633_init(void) |
| 700 | { |
| 701 | return i2c_add_driver(&pcf50633_driver); |
| 702 | } |
| 703 | |
| 704 | static void __exit pcf50633_exit(void) |
| 705 | { |
| 706 | i2c_del_driver(&pcf50633_driver); |
| 707 | } |
| 708 | |
| 709 | MODULE_DESCRIPTION("I2C chip driver for NXP PCF50633 PMU"); |
| 710 | MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>"); |
| 711 | MODULE_LICENSE("GPL"); |
| 712 | |
Samuel Ortiz | 2021de8 | 2009-06-15 18:04:54 +0200 | [diff] [blame] | 713 | subsys_initcall(pcf50633_init); |
Balaji Rao | f52046b | 2009-01-09 01:49:01 +0100 | [diff] [blame] | 714 | module_exit(pcf50633_exit); |