blob: 9c8c70c497dcc6a515b44d71035bd313d3955116 [file] [log] [blame]
David Brownellf96411a2008-10-20 23:50:05 +02001/*
2 * rtc-twl4030.c -- TWL4030 Real Time Clock interface
3 *
4 * Copyright (C) 2007 MontaVista Software, Inc
5 * Author: Alexandre Rusev <source@mvista.com>
6 *
7 * Based on original TI driver twl4030-rtc.c
8 * Copyright (C) 2006 Texas Instruments, Inc.
9 *
10 * Based on rtc-omap.c
11 * Copyright (C) 2003 MontaVista Software, Inc.
12 * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
13 * Copyright (C) 2006 David Brownell
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
19 */
20
21#include <linux/kernel.h>
Anton Vorontsov2fac6672009-01-06 14:42:11 -080022#include <linux/errno.h>
David Brownellf96411a2008-10-20 23:50:05 +020023#include <linux/init.h>
24#include <linux/module.h>
25#include <linux/types.h>
26#include <linux/rtc.h>
27#include <linux/bcd.h>
28#include <linux/platform_device.h>
29#include <linux/interrupt.h>
30
31#include <linux/i2c/twl4030.h>
32
33
34/*
35 * RTC block register offsets (use TWL_MODULE_RTC)
36 */
37#define REG_SECONDS_REG 0x00
38#define REG_MINUTES_REG 0x01
39#define REG_HOURS_REG 0x02
40#define REG_DAYS_REG 0x03
41#define REG_MONTHS_REG 0x04
42#define REG_YEARS_REG 0x05
43#define REG_WEEKS_REG 0x06
44
45#define REG_ALARM_SECONDS_REG 0x07
46#define REG_ALARM_MINUTES_REG 0x08
47#define REG_ALARM_HOURS_REG 0x09
48#define REG_ALARM_DAYS_REG 0x0A
49#define REG_ALARM_MONTHS_REG 0x0B
50#define REG_ALARM_YEARS_REG 0x0C
51
52#define REG_RTC_CTRL_REG 0x0D
53#define REG_RTC_STATUS_REG 0x0E
54#define REG_RTC_INTERRUPTS_REG 0x0F
55
56#define REG_RTC_COMP_LSB_REG 0x10
57#define REG_RTC_COMP_MSB_REG 0x11
58
59/* RTC_CTRL_REG bitfields */
60#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01
61#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02
62#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04
63#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08
64#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10
65#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20
66#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40
67
68/* RTC_STATUS_REG bitfields */
69#define BIT_RTC_STATUS_REG_RUN_M 0x02
70#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04
71#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08
72#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10
73#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20
74#define BIT_RTC_STATUS_REG_ALARM_M 0x40
75#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80
76
77/* RTC_INTERRUPTS_REG bitfields */
78#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03
79#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04
80#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08
81
82
83/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
84#define ALL_TIME_REGS 6
85
86/*----------------------------------------------------------------------*/
87
88/*
89 * Supports 1 byte read from TWL4030 RTC register.
90 */
91static int twl4030_rtc_read_u8(u8 *data, u8 reg)
92{
93 int ret;
94
95 ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg);
96 if (ret < 0)
97 pr_err("twl4030_rtc: Could not read TWL4030"
98 "register %X - error %d\n", reg, ret);
99 return ret;
100}
101
102/*
103 * Supports 1 byte write to TWL4030 RTC registers.
104 */
105static int twl4030_rtc_write_u8(u8 data, u8 reg)
106{
107 int ret;
108
109 ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg);
110 if (ret < 0)
111 pr_err("twl4030_rtc: Could not write TWL4030"
112 "register %X - error %d\n", reg, ret);
113 return ret;
114}
115
116/*
117 * Cache the value for timer/alarm interrupts register; this is
118 * only changed by callers holding rtc ops lock (or resume).
119 */
120static unsigned char rtc_irq_bits;
121
122/*
Alessandro Zummoa7483842009-01-15 13:50:52 -0800123 * Enable 1/second update and/or alarm interrupts.
David Brownellf96411a2008-10-20 23:50:05 +0200124 */
125static int set_rtc_irq_bit(unsigned char bit)
126{
127 unsigned char val;
128 int ret;
129
130 val = rtc_irq_bits | bit;
Alessandro Zummoa7483842009-01-15 13:50:52 -0800131 val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
David Brownellf96411a2008-10-20 23:50:05 +0200132 ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
133 if (ret == 0)
134 rtc_irq_bits = val;
135
136 return ret;
137}
138
139/*
Alessandro Zummoa7483842009-01-15 13:50:52 -0800140 * Disable update and/or alarm interrupts.
David Brownellf96411a2008-10-20 23:50:05 +0200141 */
142static int mask_rtc_irq_bit(unsigned char bit)
143{
144 unsigned char val;
145 int ret;
146
147 val = rtc_irq_bits & ~bit;
148 ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
149 if (ret == 0)
150 rtc_irq_bits = val;
151
152 return ret;
153}
154
Alessandro Zummoa7483842009-01-15 13:50:52 -0800155static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
David Brownellf96411a2008-10-20 23:50:05 +0200156{
157 int ret;
158
159 if (enabled)
160 ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
161 else
162 ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
163
164 return ret;
165}
166
Alessandro Zummoa7483842009-01-15 13:50:52 -0800167static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
David Brownellf96411a2008-10-20 23:50:05 +0200168{
169 int ret;
170
171 if (enabled)
172 ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
173 else
174 ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
175
176 return ret;
177}
178
179/*
180 * Gets current TWL4030 RTC time and date parameters.
181 *
182 * The RTC's time/alarm representation is not what gmtime(3) requires
183 * Linux to use:
184 *
185 * - Months are 1..12 vs Linux 0-11
186 * - Years are 0..99 vs Linux 1900..N (we assume 21st century)
187 */
188static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm)
189{
190 unsigned char rtc_data[ALL_TIME_REGS + 1];
191 int ret;
192 u8 save_control;
193
194 ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
195 if (ret < 0)
196 return ret;
197
198 save_control |= BIT_RTC_CTRL_REG_GET_TIME_M;
199
200 ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
201 if (ret < 0)
202 return ret;
203
204 ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
205 REG_SECONDS_REG, ALL_TIME_REGS);
206
207 if (ret < 0) {
208 dev_err(dev, "rtc_read_time error %d\n", ret);
209 return ret;
210 }
211
212 tm->tm_sec = bcd2bin(rtc_data[0]);
213 tm->tm_min = bcd2bin(rtc_data[1]);
214 tm->tm_hour = bcd2bin(rtc_data[2]);
215 tm->tm_mday = bcd2bin(rtc_data[3]);
216 tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
217 tm->tm_year = bcd2bin(rtc_data[5]) + 100;
218
219 return ret;
220}
221
222static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm)
223{
224 unsigned char save_control;
225 unsigned char rtc_data[ALL_TIME_REGS + 1];
226 int ret;
227
228 rtc_data[1] = bin2bcd(tm->tm_sec);
229 rtc_data[2] = bin2bcd(tm->tm_min);
230 rtc_data[3] = bin2bcd(tm->tm_hour);
231 rtc_data[4] = bin2bcd(tm->tm_mday);
232 rtc_data[5] = bin2bcd(tm->tm_mon + 1);
233 rtc_data[6] = bin2bcd(tm->tm_year - 100);
234
235 /* Stop RTC while updating the TC registers */
236 ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
237 if (ret < 0)
238 goto out;
239
240 save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
241 twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
242 if (ret < 0)
243 goto out;
244
245 /* update all the time registers in one shot */
246 ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data,
247 REG_SECONDS_REG, ALL_TIME_REGS);
248 if (ret < 0) {
249 dev_err(dev, "rtc_set_time error %d\n", ret);
250 goto out;
251 }
252
253 /* Start back RTC */
254 save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
255 ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
256
257out:
258 return ret;
259}
260
261/*
262 * Gets current TWL4030 RTC alarm time.
263 */
264static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
265{
266 unsigned char rtc_data[ALL_TIME_REGS + 1];
267 int ret;
268
269 ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
270 REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
271 if (ret < 0) {
272 dev_err(dev, "rtc_read_alarm error %d\n", ret);
273 return ret;
274 }
275
276 /* some of these fields may be wildcard/"match all" */
277 alm->time.tm_sec = bcd2bin(rtc_data[0]);
278 alm->time.tm_min = bcd2bin(rtc_data[1]);
279 alm->time.tm_hour = bcd2bin(rtc_data[2]);
280 alm->time.tm_mday = bcd2bin(rtc_data[3]);
281 alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
282 alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
283
284 /* report cached alarm enable state */
285 if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
286 alm->enabled = 1;
287
288 return ret;
289}
290
291static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
292{
293 unsigned char alarm_data[ALL_TIME_REGS + 1];
294 int ret;
295
Alessandro Zummoa7483842009-01-15 13:50:52 -0800296 ret = twl4030_rtc_alarm_irq_enable(dev, 0);
David Brownellf96411a2008-10-20 23:50:05 +0200297 if (ret)
298 goto out;
299
300 alarm_data[1] = bin2bcd(alm->time.tm_sec);
301 alarm_data[2] = bin2bcd(alm->time.tm_min);
302 alarm_data[3] = bin2bcd(alm->time.tm_hour);
303 alarm_data[4] = bin2bcd(alm->time.tm_mday);
304 alarm_data[5] = bin2bcd(alm->time.tm_mon + 1);
305 alarm_data[6] = bin2bcd(alm->time.tm_year - 100);
306
307 /* update all the alarm registers in one shot */
308 ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data,
309 REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
310 if (ret) {
311 dev_err(dev, "rtc_set_alarm error %d\n", ret);
312 goto out;
313 }
314
315 if (alm->enabled)
Alessandro Zummoa7483842009-01-15 13:50:52 -0800316 ret = twl4030_rtc_alarm_irq_enable(dev, 1);
David Brownellf96411a2008-10-20 23:50:05 +0200317out:
318 return ret;
319}
320
David Brownellf96411a2008-10-20 23:50:05 +0200321static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
322{
323 unsigned long events = 0;
324 int ret = IRQ_NONE;
325 int res;
326 u8 rd_reg;
327
328#ifdef CONFIG_LOCKDEP
329 /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
330 * we don't want and can't tolerate. Although it might be
331 * friendlier not to borrow this thread context...
332 */
333 local_irq_enable();
334#endif
335
336 res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
337 if (res)
338 goto out;
339 /*
340 * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
341 * only one (ALARM or RTC) interrupt source may be enabled
342 * at time, we also could check our results
343 * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
344 */
345 if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
346 events |= RTC_IRQF | RTC_AF;
347 else
348 events |= RTC_IRQF | RTC_UF;
349
350 res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M,
351 REG_RTC_STATUS_REG);
352 if (res)
353 goto out;
354
355 /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
356 * needs 2 reads to clear the interrupt. One read is done in
357 * do_twl4030_pwrirq(). Doing the second read, to clear
358 * the bit.
359 *
360 * FIXME the reason PWR_ISR1 needs an extra read is that
361 * RTC_IF retriggered until we cleared REG_ALARM_M above.
362 * But re-reading like this is a bad hack; by doing so we
363 * risk wrongly clearing status for some other IRQ (losing
364 * the interrupt). Be smarter about handling RTC_UF ...
365 */
366 res = twl4030_i2c_read_u8(TWL4030_MODULE_INT,
367 &rd_reg, TWL4030_INT_PWR_ISR1);
368 if (res)
369 goto out;
370
371 /* Notify RTC core on event */
372 rtc_update_irq(rtc, 1, events);
373
374 ret = IRQ_HANDLED;
375out:
376 return ret;
377}
378
379static struct rtc_class_ops twl4030_rtc_ops = {
David Brownellf96411a2008-10-20 23:50:05 +0200380 .read_time = twl4030_rtc_read_time,
381 .set_time = twl4030_rtc_set_time,
382 .read_alarm = twl4030_rtc_read_alarm,
383 .set_alarm = twl4030_rtc_set_alarm,
Alessandro Zummoa7483842009-01-15 13:50:52 -0800384 .alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
385 .update_irq_enable = twl4030_rtc_update_irq_enable,
David Brownellf96411a2008-10-20 23:50:05 +0200386};
387
388/*----------------------------------------------------------------------*/
389
390static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
391{
392 struct rtc_device *rtc;
393 int ret = 0;
394 int irq = platform_get_irq(pdev, 0);
395 u8 rd_reg;
396
Anton Vorontsov2fac6672009-01-06 14:42:11 -0800397 if (irq <= 0)
398 return -EINVAL;
David Brownellf96411a2008-10-20 23:50:05 +0200399
400 rtc = rtc_device_register(pdev->name,
401 &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
402 if (IS_ERR(rtc)) {
Alessandro Zummoa7483842009-01-15 13:50:52 -0800403 ret = PTR_ERR(rtc);
David Brownellf96411a2008-10-20 23:50:05 +0200404 dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
405 PTR_ERR(rtc));
406 goto out0;
407
408 }
409
410 platform_set_drvdata(pdev, rtc);
411
412 ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
David Brownellf96411a2008-10-20 23:50:05 +0200413 if (ret < 0)
414 goto out1;
415
416 if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
417 dev_warn(&pdev->dev, "Power up reset detected.\n");
418
419 if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
420 dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
421
422 /* Clear RTC Power up reset and pending alarm interrupts */
423 ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
424 if (ret < 0)
425 goto out1;
426
427 ret = request_irq(irq, twl4030_rtc_interrupt,
428 IRQF_TRIGGER_RISING,
Kay Sievers744bcb12009-03-24 16:38:22 -0700429 dev_name(&rtc->dev), rtc);
David Brownellf96411a2008-10-20 23:50:05 +0200430 if (ret < 0) {
431 dev_err(&pdev->dev, "IRQ is not free.\n");
432 goto out1;
433 }
434
435 /* Check RTC module status, Enable if it is off */
436 ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
437 if (ret < 0)
438 goto out2;
439
440 if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
441 dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n");
442 rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
443 ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
444 if (ret < 0)
445 goto out2;
446 }
447
448 /* init cached IRQ enable bits */
449 ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
450 if (ret < 0)
451 goto out2;
452
453 return ret;
454
David Brownellf96411a2008-10-20 23:50:05 +0200455out2:
456 free_irq(irq, rtc);
457out1:
458 rtc_device_unregister(rtc);
459out0:
460 return ret;
461}
462
463/*
464 * Disable all TWL4030 RTC module interrupts.
465 * Sets status flag to free.
466 */
467static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
468{
469 /* leave rtc running, but disable irqs */
470 struct rtc_device *rtc = platform_get_drvdata(pdev);
471 int irq = platform_get_irq(pdev, 0);
472
473 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
474 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
475
476 free_irq(irq, rtc);
477
478 rtc_device_unregister(rtc);
479 platform_set_drvdata(pdev, NULL);
480 return 0;
481}
482
483static void twl4030_rtc_shutdown(struct platform_device *pdev)
484{
Matti Halmecafa1d82009-01-15 13:50:56 -0800485 /* mask timer interrupts, but leave alarm interrupts on to enable
486 power-on when alarm is triggered */
487 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
David Brownellf96411a2008-10-20 23:50:05 +0200488}
489
490#ifdef CONFIG_PM
491
492static unsigned char irqstat;
493
494static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
495{
496 irqstat = rtc_irq_bits;
497
Kim Kyuwonf9930042009-05-12 13:19:38 -0700498 mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
David Brownellf96411a2008-10-20 23:50:05 +0200499 return 0;
500}
501
502static int twl4030_rtc_resume(struct platform_device *pdev)
503{
504 set_rtc_irq_bit(irqstat);
505 return 0;
506}
507
508#else
509#define twl4030_rtc_suspend NULL
510#define twl4030_rtc_resume NULL
511#endif
512
513MODULE_ALIAS("platform:twl4030_rtc");
514
515static struct platform_driver twl4030rtc_driver = {
516 .probe = twl4030_rtc_probe,
517 .remove = __devexit_p(twl4030_rtc_remove),
518 .shutdown = twl4030_rtc_shutdown,
519 .suspend = twl4030_rtc_suspend,
520 .resume = twl4030_rtc_resume,
521 .driver = {
522 .owner = THIS_MODULE,
523 .name = "twl4030_rtc",
524 },
525};
526
527static int __init twl4030_rtc_init(void)
528{
529 return platform_driver_register(&twl4030rtc_driver);
530}
531module_init(twl4030_rtc_init);
532
533static void __exit twl4030_rtc_exit(void)
534{
535 platform_driver_unregister(&twl4030rtc_driver);
536}
537module_exit(twl4030_rtc_exit);
538
539MODULE_AUTHOR("Texas Instruments, MontaVista Software");
540MODULE_LICENSE("GPL");