blob: 7ba7738759b951b603ea7e0d4ee7ad198754ad9a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*********************************************************************
2 *
3 * Filename: nsc-ircc.h
4 * Version:
5 * Description:
6 * Status: Experimental.
7 * Author: Dag Brattli <dagb@cs.uit.no>
8 * Created at: Fri Nov 13 14:37:40 1998
9 * Modified at: Sun Jan 23 17:47:00 2000
10 * Modified by: Dag Brattli <dagb@cs.uit.no>
11 *
12 * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
13 * Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
14 * Copyright (c) 1998 Actisys Corp., www.actisys.com
15 * All Rights Reserved
16 *
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License as
19 * published by the Free Software Foundation; either version 2 of
20 * the License, or (at your option) any later version.
21 *
Jan Engelhardt96de0e22007-10-19 23:21:04 +020022 * Neither Dag Brattli nor University of Tromsø admit liability nor
Linus Torvalds1da177e2005-04-16 15:20:36 -070023 * provide warranty for any of this software. This material is
24 * provided "AS-IS" and at no charge.
25 *
26 ********************************************************************/
27
28#ifndef NSC_IRCC_H
29#define NSC_IRCC_H
30
31#include <linux/time.h>
32
33#include <linux/spinlock.h>
34#include <linux/pm.h>
35#include <linux/types.h>
36#include <asm/io.h>
37
Matthew Garrett1fa98172008-07-30 17:00:38 -070038/* Features for chips (set in driver_data) */
39#define NSC_FORCE_DONGLE_TYPE9 0x00000001
40
Linus Torvalds1da177e2005-04-16 15:20:36 -070041/* DMA modes needed */
42#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */
43#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */
44
45/* Config registers for the '108 */
46#define CFG_108_BAIC 0x00
47#define CFG_108_CSRT 0x01
48#define CFG_108_MCTL 0x02
49
50/* Config registers for the '338 */
51#define CFG_338_FER 0x00
52#define CFG_338_FAR 0x01
53#define CFG_338_PTR 0x02
54#define CFG_338_PNP0 0x1b
55#define CFG_338_PNP1 0x1c
56#define CFG_338_PNP3 0x4f
57
58/* Config registers for the '39x (in the logical device bank) */
59#define CFG_39X_LDN 0x07 /* Logical device number (Super I/O bank) */
60#define CFG_39X_SIOCF1 0x21 /* SuperI/O Config */
61#define CFG_39X_ACT 0x30 /* Device activation */
62#define CFG_39X_BASEH 0x60 /* Device base address (high bits) */
63#define CFG_39X_BASEL 0x61 /* Device base address (low bits) */
64#define CFG_39X_IRQNUM 0x70 /* Interrupt number & wake up enable */
65#define CFG_39X_IRQSEL 0x71 /* Interrupt select (edge/level + polarity) */
66#define CFG_39X_DMA0 0x74 /* DMA 0 configuration */
67#define CFG_39X_DMA1 0x75 /* DMA 1 configuration */
68#define CFG_39X_SPC 0xF0 /* Serial port configuration register */
69
70/* Flags for configuration register CRF0 */
71#define APEDCRC 0x02
72#define ENBNKSEL 0x01
73
74/* Set 0 */
75#define TXD 0x00 /* Transmit data port */
76#define RXD 0x00 /* Receive data port */
77
78/* Register 1 */
79#define IER 0x01 /* Interrupt Enable Register*/
80#define IER_RXHDL_IE 0x01 /* Receiver high data level interrupt */
81#define IER_TXLDL_IE 0x02 /* Transeiver low data level interrupt */
82#define IER_LS_IE 0x04//* Link Status Interrupt */
83#define IER_ETXURI 0x04 /* Tx underrun */
84#define IER_DMA_IE 0x10 /* DMA finished interrupt */
85#define IER_TXEMP_IE 0x20
86#define IER_SFIF_IE 0x40 /* Frame status FIFO intr */
87#define IER_TMR_IE 0x80 /* Timer event */
88
89#define FCR 0x02 /* (write only) */
90#define FCR_FIFO_EN 0x01 /* Enable FIFO's */
91#define FCR_RXSR 0x02 /* Rx FIFO soft reset */
92#define FCR_TXSR 0x04 /* Tx FIFO soft reset */
93#define FCR_RXTH 0x40 /* Rx FIFO threshold (set to 16) */
94#define FCR_TXTH 0x20 /* Tx FIFO threshold (set to 17) */
95
96#define EIR 0x02 /* (read only) */
97#define EIR_RXHDL_EV 0x01
98#define EIR_TXLDL_EV 0x02
99#define EIR_LS_EV 0x04
100#define EIR_DMA_EV 0x10
101#define EIR_TXEMP_EV 0x20
102#define EIR_SFIF_EV 0x40
103#define EIR_TMR_EV 0x80
104
105#define LCR 0x03 /* Link control register */
106#define LCR_WLS_8 0x03 /* 8 bits */
107
108#define BSR 0x03 /* Bank select register */
109#define BSR_BKSE 0x80
110#define BANK0 LCR_WLS_8 /* Must make sure that we set 8N1 */
111#define BANK1 0x80
112#define BANK2 0xe0
113#define BANK3 0xe4
114#define BANK4 0xe8
115#define BANK5 0xec
116#define BANK6 0xf0
117#define BANK7 0xf4
118
119#define MCR 0x04 /* Mode Control Register */
120#define MCR_MODE_MASK ~(0xd0)
121#define MCR_UART 0x00
122#define MCR_RESERVED 0x20
123#define MCR_SHARP_IR 0x40
124#define MCR_SIR 0x60
125#define MCR_MIR 0x80
126#define MCR_FIR 0xa0
127#define MCR_CEIR 0xb0
128#define MCR_IR_PLS 0x10
129#define MCR_DMA_EN 0x04
130#define MCR_EN_IRQ 0x08
131#define MCR_TX_DFR 0x08
132
133#define LSR 0x05 /* Link status register */
134#define LSR_RXDA 0x01 /* Receiver data available */
135#define LSR_TXRDY 0x20 /* Transmitter ready */
136#define LSR_TXEMP 0x40 /* Transmitter empty */
137
138#define ASCR 0x07 /* Auxillary Status and Control Register */
139#define ASCR_RXF_TOUT 0x01 /* Rx FIFO timeout */
140#define ASCR_FEND_INF 0x02 /* Frame end bytes in rx FIFO */
141#define ASCR_S_EOT 0x04 /* Set end of transmission */
142#define ASCT_RXBSY 0x20 /* Rx busy */
143#define ASCR_TXUR 0x40 /* Transeiver underrun */
144#define ASCR_CTE 0x80 /* Clear timer event */
145
146/* Bank 2 */
147#define BGDL 0x00 /* Baud Generator Divisor Port (Low Byte) */
148#define BGDH 0x01 /* Baud Generator Divisor Port (High Byte) */
149
150#define ECR1 0x02 /* Extended Control Register 1 */
151#define ECR1_EXT_SL 0x01 /* Extended Mode Select */
152#define ECR1_DMANF 0x02 /* DMA Fairness */
153#define ECR1_DMATH 0x04 /* DMA Threshold */
154#define ECR1_DMASWP 0x08 /* DMA Swap */
155
156#define EXCR2 0x04
157#define EXCR2_TFSIZ 0x01 /* Rx FIFO size = 32 */
158#define EXCR2_RFSIZ 0x04 /* Tx FIFO size = 32 */
159
160#define TXFLV 0x06 /* Tx FIFO level */
161#define RXFLV 0x07 /* Rx FIFO level */
162
163/* Bank 3 */
164#define MID 0x00
165
166/* Bank 4 */
167#define TMRL 0x00 /* Timer low byte */
168#define TMRH 0x01 /* Timer high byte */
169#define IRCR1 0x02 /* Infrared control register 1 */
170#define IRCR1_TMR_EN 0x01 /* Timer enable */
171
172#define TFRLL 0x04
173#define TFRLH 0x05
174#define RFRLL 0x06
175#define RFRLH 0x07
176
177/* Bank 5 */
178#define IRCR2 0x04 /* Infrared control register 2 */
179#define IRCR2_MDRS 0x04 /* MIR data rate select */
180#define IRCR2_FEND_MD 0x20 /* */
181
182#define FRM_ST 0x05 /* Frame status FIFO */
183#define FRM_ST_VLD 0x80 /* Frame status FIFO data valid */
184#define FRM_ST_ERR_MSK 0x5f
185#define FRM_ST_LOST_FR 0x40 /* Frame lost */
186#define FRM_ST_MAX_LEN 0x10 /* Max frame len exceeded */
187#define FRM_ST_PHY_ERR 0x08 /* Physical layer error */
188#define FRM_ST_BAD_CRC 0x04
189#define FRM_ST_OVR1 0x02 /* Rx FIFO overrun */
190#define FRM_ST_OVR2 0x01 /* Frame status FIFO overrun */
191
192#define RFLFL 0x06
193#define RFLFH 0x07
194
195/* Bank 6 */
196#define IR_CFG2 0x00
197#define IR_CFG2_DIS_CRC 0x02
198
199/* Bank 7 */
200#define IRM_CR 0x07 /* Infrared module control register */
201#define IRM_CR_IRX_MSL 0x40
202#define IRM_CR_AF_MNT 0x80 /* Automatic format */
203
204/* NSC chip information */
205struct nsc_chip {
206 char *name; /* Name of chipset */
207 int cfg[3]; /* Config registers */
208 u_int8_t cid_index; /* Chip identification index reg */
209 u_int8_t cid_value; /* Chip identification expected value */
210 u_int8_t cid_mask; /* Chip identification revision mask */
211
212 /* Functions for probing and initializing the specific chip */
213 int (*probe)(struct nsc_chip *chip, chipio_t *info);
214 int (*init)(struct nsc_chip *chip, chipio_t *info);
215};
216typedef struct nsc_chip nsc_chip_t;
217
218/* For storing entries in the status FIFO */
219struct st_fifo_entry {
220 int status;
221 int len;
222};
223
224#define MAX_TX_WINDOW 7
225#define MAX_RX_WINDOW 7
226
227struct st_fifo {
228 struct st_fifo_entry entries[MAX_RX_WINDOW];
229 int pending_bytes;
230 int head;
231 int tail;
232 int len;
233};
234
235struct frame_cb {
236 void *start; /* Start of frame in DMA mem */
Paulius Zaleckasefad798b2008-02-03 15:42:53 +0200237 int len; /* Length of frame in DMA mem */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700238};
239
240struct tx_fifo {
241 struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
242 int ptr; /* Currently being sent */
Paulius Zaleckasefad798b2008-02-03 15:42:53 +0200243 int len; /* Length of queue */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700244 int free; /* Next free slot */
245 void *tail; /* Next free start in DMA mem */
246};
247
248/* Private data for each instance */
249struct nsc_ircc_cb {
250 struct st_fifo st_fifo; /* Info about received frames */
251 struct tx_fifo tx_fifo; /* Info about frames to be transmitted */
252
253 struct net_device *netdev; /* Yes! we are some kind of netdevice */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254
255 struct irlap_cb *irlap; /* The link layer we are binded to */
256 struct qos_info qos; /* QoS capabilities for this device */
257
258 chipio_t io; /* IrDA controller information */
259 iobuff_t tx_buff; /* Transmit buffer */
260 iobuff_t rx_buff; /* Receive buffer */
261 dma_addr_t tx_buff_dma;
262 dma_addr_t rx_buff_dma;
263
264 __u8 ier; /* Interrupt enable register */
265
266 struct timeval stamp;
267 struct timeval now;
268
269 spinlock_t lock; /* For serializing operations */
270
271 __u32 new_speed;
272 int index; /* Instance index */
273
Dmitry Torokhov3b99b932006-03-20 18:59:05 -0800274 struct platform_device *pldev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700275};
276
277static inline void switch_bank(int iobase, int bank)
278{
279 outb(bank, iobase+BSR);
280}
281
282#endif /* NSC_IRCC_H */