blob: e086f9e937280ec2b6676065a6e3b19bbfcc5ba1 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001config MMU
2 bool
3 default y
4
Christoph Lameter66701b12007-02-10 01:43:09 -08005config ZONE_DMA
6 bool
7 default y
8
Linus Torvalds1da177e2005-04-16 15:20:36 -07009config RWSEM_GENERIC_SPINLOCK
10 bool
11 default y
12
13config RWSEM_XCHGADD_ALGORITHM
14 bool
15
David Howellsf0d1b0b2006-12-08 02:37:49 -080016config ARCH_HAS_ILOG2_U32
17 bool
18 default n
19
20config ARCH_HAS_ILOG2_U64
21 bool
22 default n
23
Akinobu Mitae9f26df2006-03-26 01:39:21 -080024config GENERIC_HWEIGHT
25 bool
26 default y
27
Linus Torvalds1da177e2005-04-16 15:20:36 -070028config GENERIC_CALIBRATE_DELAY
29 bool
30 default y
31
Uwe Kleine-Königce816fa2014-04-07 15:39:19 -070032config NO_IOPORT_MAP
Al Viro5ea81762007-02-11 15:41:31 +000033 def_bool y
34
Jesper Nilsson923dd2a2007-12-05 18:10:36 +010035config FORCE_MAX_ZONEORDER
36 int
37 default 6
38
Rabin Vincent444e0c22015-02-19 21:36:55 +010039config TRACE_IRQFLAGS_SUPPORT
40 depends on ETRAX_ARCH_V32
41 def_bool y
42
Rabin Vincentaa6f4d22015-05-14 18:19:03 +020043config STACKTRACE_SUPPORT
44 def_bool y
45
Rabin Vincent94c5c112015-05-14 18:19:37 +020046config LOCKDEP_SUPPORT
47 depends on ETRAX_ARCH_V32
48 def_bool y
49
Linus Torvalds1da177e2005-04-16 15:20:36 -070050config CRIS
51 bool
52 default y
Sam Ravnborgec7748b2008-02-09 10:46:40 +010053 select HAVE_IDE
Cong Wang4c9c6a12012-05-29 15:06:15 -070054 select GENERIC_ATOMIC64
Catalin Marinasaf1839e2012-10-08 16:28:08 -070055 select HAVE_UID16
Stephen Rothwell4febd952013-03-07 15:48:16 +110056 select VIRT_TO_BUS
Will Deaconc1d7e012012-07-30 14:42:46 -070057 select ARCH_WANT_IPC_PARSE_VERSION
Thomas Gleixner15825a52011-03-17 13:39:19 +010058 select GENERIC_IRQ_SHOW
Michael S. Tsirkin4673ca82011-11-24 14:54:28 +020059 select GENERIC_IOMAP
David Howells786d35d2012-09-28 14:31:03 +093060 select MODULES_USE_ELF_RELA
Al Viro27d892f2012-10-26 15:15:13 -040061 select CLONE_BACKWARDS2
Al Viro86df89a2012-12-25 16:28:27 -050062 select OLD_SIGSUSPEND
Al Viroeb2f2562012-12-25 19:30:53 -050063 select OLD_SIGACTION
Rabin Vincent8fda64c2015-02-05 21:20:26 +010064 select ARCH_REQUIRE_GPIOLIB
Rabin Vincent43f70712015-02-08 16:15:19 +010065 select IRQ_DOMAIN if ETRAX_ARCH_V32
Rabin Vincenta9f75ac2015-02-08 16:14:06 +010066 select OF if ETRAX_ARCH_V32
67 select OF_EARLY_FLATTREE if ETRAX_ARCH_V32
Rabin Vincentedfb6d52015-03-09 18:48:25 +010068 select CLKSRC_MMIO if ETRAX_ARCH_V32
Rabin Vincented9fd3f2015-03-08 16:29:12 +010069 select GENERIC_CLOCKEVENTS if ETRAX_ARCH_V32
Rabin Vincentd3dad472015-03-09 18:51:31 +010070 select GENERIC_SCHED_CLOCK if ETRAX_ARCH_V32
Rabin Vincentf59625a2015-05-14 14:36:56 +020071 select HAVE_DEBUG_BUGVERBOSE if ETRAX_ARCH_V32
Linus Torvalds1da177e2005-04-16 15:20:36 -070072
H. Peter Anvinbdc80782008-02-08 04:21:26 -080073config HZ
74 int
75 default 100
76
Jesper Nilssondd820942015-01-15 17:30:40 +010077config NR_CPUS
78 int
79 default "1"
80
Rabin Vincenta9f75ac2015-02-08 16:14:06 +010081config BUILTIN_DTB
82 string "DTB to build into the kernel image"
83 depends on OF
84
Linus Torvalds1da177e2005-04-16 15:20:36 -070085source "init/Kconfig"
86
Matt Helsleydc52ddc2008-10-18 20:27:21 -070087source "kernel/Kconfig.freezer"
88
Linus Torvalds1da177e2005-04-16 15:20:36 -070089menu "General setup"
90
91source "fs/Kconfig.binfmt"
92
93config ETRAX_CMDLINE
94 string "Kernel command line"
95 default "root=/dev/mtdblock3"
96 help
97 Pass additional commands to the kernel.
98
99config ETRAX_WATCHDOG
100 bool "Enable ETRAX watchdog"
101 help
102 Enable the built-in watchdog timer support on ETRAX based embedded
103 network computers.
104
105config ETRAX_WATCHDOG_NICE_DOGGY
106 bool "Disable watchdog during Oops printouts"
107 depends on ETRAX_WATCHDOG
108 help
109 By enabling this you make sure that the watchdog does not bite while
110 printing oopses. Recommended for development systems but not for
111 production releases.
112
113config ETRAX_FAST_TIMER
114 bool "Enable ETRAX fast timer API"
115 help
116 This options enables the API to a fast timer implementation using
117 timer1 to get sub jiffie resolution timers (primarily one-shot
118 timers).
119 This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
120
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100121config ETRAX_KMALLOCED_MODULES
122 bool "Enable module allocation with kmalloc"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700123 help
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100124 Enable module allocation with kmalloc instead of vmalloc.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700125
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100126source "kernel/Kconfig.preempt"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700127
Dave Hansen3f22ab22005-06-23 00:07:43 -0700128source mm/Kconfig
129
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130endmenu
131
132menu "Hardware setup"
133
134choice
135 prompt "Processor type"
136 default ETRAX100LX
137
138config ETRAX100LX
139 bool "ETRAX-100LX-v1"
Jesper Nilsson60dbd662010-07-30 17:33:07 +0200140 select ARCH_USES_GETTIMEOFFSET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700141 help
142 Support version 1 of the ETRAX 100LX.
143
144config ETRAX100LX_V2
145 bool "ETRAX-100LX-v2"
Jesper Nilsson60dbd662010-07-30 17:33:07 +0200146 select ARCH_USES_GETTIMEOFFSET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700147 help
148 Support version 2 of the ETRAX 100LX.
149
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100150config ETRAXFS
151 bool "ETRAX-FS-V32"
152 help
153 Support CRIS V32.
154
155config CRIS_MACH_ARTPEC3
156 bool "ARTPEC-3"
157 help
158 Support Axis ARTPEC-3.
159
Linus Torvalds1da177e2005-04-16 15:20:36 -0700160endchoice
161
162config ETRAX_ARCH_V10
163 bool
164 default y if ETRAX100LX || ETRAX100LX_V2
165 default n if !(ETRAX100LX || ETRAX100LX_V2)
Josh Triplettae797bd2014-04-07 15:39:04 -0700166 select TTY
Linus Torvalds1da177e2005-04-16 15:20:36 -0700167
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100168config ETRAX_ARCH_V32
169 bool
170 default y if (ETRAXFS || CRIS_MACH_ARTPEC3)
171 default n if !(ETRAXFS || CRIS_MACH_ARTPEC3)
172
Linus Torvalds1da177e2005-04-16 15:20:36 -0700173config ETRAX_DRAM_SIZE
174 int "DRAM size (dec, in MB)"
175 default "8"
176 help
177 Size of DRAM (decimal in MB) typically 2, 8 or 16.
178
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100179config ETRAX_VMEM_SIZE
180 int "Video memory size (dec, in MB)"
181 depends on ETRAX_ARCH_V32 && !ETRAXFS
182 default 8 if !ETRAXFS
183 help
184 Size of Video accessible memory (decimal, in MB).
185
Linus Torvalds1da177e2005-04-16 15:20:36 -0700186config ETRAX_FLASH_BUSWIDTH
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100187 int "Buswidth of NOR flash in bytes"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700188 default "2"
189 help
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100190 Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
191
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100192config ETRAX_FLASH1_SIZE
193 int "FLASH1 size (dec, in MB. 0 = Unknown)"
194 default "0"
195
196choice
197 prompt "Product debug-port"
198 default ETRAX_DEBUG_PORT0
199
200config ETRAX_DEBUG_PORT0
201 bool "Serial-0"
202 help
203 Choose a serial port for the ETRAX debug console. Default to
204 port 0.
205
206config ETRAX_DEBUG_PORT1
207 bool "Serial-1"
208 help
209 Use serial port 1 for the console.
210
211config ETRAX_DEBUG_PORT2
212 bool "Serial-2"
213 help
214 Use serial port 2 for the console.
215
216config ETRAX_DEBUG_PORT3
217 bool "Serial-3"
218 help
219 Use serial port 3 for the console.
220
221config ETRAX_DEBUG_PORT_NULL
222 bool "disabled"
223 help
224 Disable serial-port debugging.
225
226endchoice
227
228choice
229 prompt "Kernel GDB port"
230 depends on ETRAX_KGDB
231 default ETRAX_KGDB_PORT0
232 help
233 Choose a serial port for kernel debugging. NOTE: This port should
234 not be enabled under Drivers for built-in interfaces (as it has its
235 own initialization code) and should not be the same as the debug port.
236
237config ETRAX_KGDB_PORT0
238 bool "Serial-0"
239 help
240 Use serial port 0 for kernel debugging.
241
242config ETRAX_KGDB_PORT1
243 bool "Serial-1"
244 help
245 Use serial port 1 for kernel debugging.
246
247config ETRAX_KGDB_PORT2
248 bool "Serial-2"
249 help
250 Use serial port 2 for kernel debugging.
251
252config ETRAX_KGDB_PORT3
253 bool "Serial-3"
254 help
255 Use serial port 3 for kernel debugging.
256
257endchoice
Linus Torvalds1da177e2005-04-16 15:20:36 -0700258
259source arch/cris/arch-v10/Kconfig
Jesper Nilsson2d33d562008-02-04 22:30:31 -0800260source arch/cris/arch-v32/Kconfig
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261
262endmenu
263
Sam Ravnborgd5950b42005-07-11 21:03:49 -0700264source "net/Kconfig"
265
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266# bring in ETRAX built-in drivers
267menu "Drivers for built-in interfaces"
Jesper Nilsson2d33d562008-02-04 22:30:31 -0800268source arch/cris/arch-v10/drivers/Kconfig
269source arch/cris/arch-v32/drivers/Kconfig
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270
Jesper Nilsson79e04fd2008-02-06 13:21:28 +0100271config ETRAX_AXISFLASHMAP
272 bool "Axis flash-map support"
273 select MTD
274 select MTD_CFI
275 select MTD_CFI_AMDSTD
276 select MTD_JEDECPROBE if ETRAX_ARCH_V32
Jesper Nilsson79e04fd2008-02-06 13:21:28 +0100277 select MTD_BLOCK
Jesper Nilsson79e04fd2008-02-06 13:21:28 +0100278 select MTD_COMPLEX_MAPPINGS
279 help
280 This option enables MTD mapping of flash devices. Needed to use
281 flash memories. If unsure, say Y.
282
Jesper Nilssonc974a9e2008-01-21 11:44:11 +0100283config ETRAX_SYNCHRONOUS_SERIAL
284 bool "Synchronous serial-port support"
285 help
286 Select this to enable the synchronous serial port driver.
287
288config ETRAX_SYNCHRONOUS_SERIAL_PORT0
289 bool "Synchronous serial port 0 enabled"
290 depends on ETRAX_SYNCHRONOUS_SERIAL
291 help
292 Enabled synchronous serial port 0.
293
294config ETRAX_SYNCHRONOUS_SERIAL0_DMA
295 bool "Enable DMA on synchronous serial port 0."
296 depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
297 help
298 A synchronous serial port can run in manual or DMA mode.
299 Selecting this option will make it run in DMA mode.
300
301config ETRAX_SYNCHRONOUS_SERIAL_PORT1
302 bool "Synchronous serial port 1 enabled"
303 depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10)
304 help
305 Enabled synchronous serial port 1.
306
307config ETRAX_SYNCHRONOUS_SERIAL1_DMA
308 bool "Enable DMA on synchronous serial port 1."
309 depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
310 help
311 A synchronous serial port can run in manual or DMA mode.
312 Selecting this option will make it run in DMA mode.
313
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100314choice
315 prompt "Network LED behavior"
316 depends on ETRAX_ETHERNET
317 default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
318
319config ETRAX_NETWORK_LED_ON_WHEN_LINK
320 bool "LED_on_when_link"
321 help
322 Selecting LED_on_when_link will light the LED when there is a
323 connection and will flash off when there is activity.
324
325 Selecting LED_on_when_activity will light the LED only when
326 there is activity.
327
328 This setting will also affect the behaviour of other activity LEDs
329 e.g. Bluetooth.
330
331config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
332 bool "LED_on_when_activity"
333 help
334 Selecting LED_on_when_link will light the LED when there is a
335 connection and will flash off when there is activity.
336
337 Selecting LED_on_when_activity will light the LED only when
338 there is activity.
339
340 This setting will also affect the behaviour of other activity LEDs
341 e.g. Bluetooth.
342
343endchoice
344
345choice
346 prompt "Ser0 DMA out channel"
347 depends on ETRAX_SERIAL_PORT0
348 default ETRAX_SERIAL_PORT0_DMA6_OUT if ETRAX_ARCH_V32
349 default ETRAX_SERIAL_PORT0_NO_DMA_OUT if ETRAX_ARCH_V10
350
351config ETRAX_SERIAL_PORT0_NO_DMA_OUT
352 bool "Ser0 uses no DMA for output"
353 help
354 Do not use DMA for ser0 output.
355
356config ETRAX_SERIAL_PORT0_DMA6_OUT
357 bool "Ser0 uses DMA6 for output"
358 depends on ETRAXFS
359 help
360 Enables the DMA6 output channel for ser0 (ttyS0).
361 If you do not enable DMA, an interrupt for each character will be
362 used when transmitting data.
363 Normally you want to use DMA, unless you use the DMA channel for
364 something else.
365
366config ETRAX_SERIAL_PORT0_DMA0_OUT
367 bool "Ser0 uses DMA0 for output"
368 depends on CRIS_MACH_ARTPEC3
369 help
370 Enables the DMA0 output channel for ser0 (ttyS0).
371 If you do not enable DMA, an interrupt for each character will be
372 used when transmitting data.
373 Normally you want to use DMA, unless you use the DMA channel for
374 something else.
375
376endchoice
377
378choice
379 prompt "Ser0 DMA in channel "
380 depends on ETRAX_SERIAL_PORT0
381 default ETRAX_SERIAL_PORT0_NO_DMA_IN if ETRAX_ARCH_V32
382 default ETRAX_SERIAL_PORT0_DMA7_IN if ETRAX_ARCH_V10
383 help
384 What DMA channel to use for ser0.
385
386config ETRAX_SERIAL_PORT0_NO_DMA_IN
387 bool "Ser0 uses no DMA for input"
388 help
389 Do not use DMA for ser0 input.
390
391config ETRAX_SERIAL_PORT0_DMA7_IN
392 bool "Ser0 uses DMA7 for input"
393 depends on ETRAXFS
394 help
395 Enables the DMA7 input channel for ser0 (ttyS0).
396 If you do not enable DMA, an interrupt for each character will be
397 used when receiving data.
398 Normally you want to use DMA, unless you use the DMA channel for
399 something else.
400
401config ETRAX_SERIAL_PORT0_DMA1_IN
402 bool "Ser0 uses DMA1 for input"
403 depends on CRIS_MACH_ARTPEC3
404 help
405 Enables the DMA1 input channel for ser0 (ttyS0).
406 If you do not enable DMA, an interrupt for each character will be
Matt LaPlante692105b2009-01-26 11:12:25 +0100407 used when receiving data.
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100408 Normally you want to use DMA, unless you use the DMA channel for
409 something else.
410
411endchoice
412
413choice
414 prompt "Ser1 DMA in channel "
415 depends on ETRAX_SERIAL_PORT1
416 default ETRAX_SERIAL_PORT1_NO_DMA_IN if ETRAX_ARCH_V32
417 default ETRAX_SERIAL_PORT1_DMA9_IN if ETRAX_ARCH_V10
418 help
419 What DMA channel to use for ser1.
420
421config ETRAX_SERIAL_PORT1_NO_DMA_IN
422 bool "Ser1 uses no DMA for input"
423 help
424 Do not use DMA for ser1 input.
425
426config ETRAX_SERIAL_PORT1_DMA5_IN
427 bool "Ser1 uses DMA5 for input"
428 depends on ETRAX_ARCH_V32
429 help
430 Enables the DMA5 input channel for ser1 (ttyS1).
431 If you do not enable DMA, an interrupt for each character will be
432 used when receiving data.
433 Normally you want this on, unless you use the DMA channel for
434 something else.
435
436config ETRAX_SERIAL_PORT1_DMA9_IN
437 depends on ETRAX_ARCH_V10
438 bool "Ser1 uses DMA9 for input"
439
440endchoice
441
442
443choice
444 prompt "Ser1 DMA out channel"
445 depends on ETRAX_SERIAL_PORT1
446 default ETRAX_SERIAL_PORT1_NO_DMA_OUT if ETRAX_ARCH_V32
447 default ETRAX_SERIAL_PORT1_DMA8_OUT if ETRAX_ARCH_V10
448 help
449 What DMA channel to use for ser1.
450
451config ETRAX_SERIAL_PORT1_NO_DMA_OUT
452 bool "Ser1 uses no DMA for output"
453 help
454 Do not use DMA for ser1 output.
455
456config ETRAX_SERIAL_PORT1_DMA8_OUT
457 depends on ETRAX_ARCH_V10
458 bool "Ser1 uses DMA8 for output"
459
460config ETRAX_SERIAL_PORT1_DMA4_OUT
461 depends on ETRAX_ARCH_V32
462 bool "Ser1 uses DMA4 for output"
463 help
464 Enables the DMA4 output channel for ser1 (ttyS1).
465 If you do not enable DMA, an interrupt for each character will be
466 used when transmitting data.
467 Normally you want this on, unless you use the DMA channel for
468 something else.
469
470endchoice
471
472choice
473 prompt "Ser2 DMA out channel"
474 depends on ETRAX_SERIAL_PORT2
475 default ETRAX_SERIAL_PORT2_NO_DMA_OUT if ETRAX_ARCH_V32
476 default ETRAX_SERIAL_PORT2_DMA2_OUT if ETRAX_ARCH_V10
477
478config ETRAX_SERIAL_PORT2_NO_DMA_OUT
479 bool "Ser2 uses no DMA for output"
480 help
481 Do not use DMA for ser2 output.
482
483config ETRAX_SERIAL_PORT2_DMA2_OUT
484 bool "Ser2 uses DMA2 for output"
485 depends on ETRAXFS || ETRAX_ARCH_V10
486 help
487 Enables the DMA2 output channel for ser2 (ttyS2).
488 If you do not enable DMA, an interrupt for each character will be
489 used when transmitting data.
490 Normally you want to use DMA, unless you use the DMA channel for
491 something else.
492
493config ETRAX_SERIAL_PORT2_DMA6_OUT
494 bool "Ser2 uses DMA6 for output"
495 depends on CRIS_MACH_ARTPEC3
496 help
497 Enables the DMA6 output channel for ser2 (ttyS2).
498 If you do not enable DMA, an interrupt for each character will be
499 used when transmitting data.
500 Normally you want to use DMA, unless you use the DMA channel for
501 something else.
502
503endchoice
504
505choice
506 prompt "Ser2 DMA in channel"
507 depends on ETRAX_SERIAL_PORT2
508 default ETRAX_SERIAL_PORT2_NO_DMA_IN if ETRAX_ARCH_V32
509 default ETRAX_SERIAL_PORT2_DMA3_IN if ETRAX_ARCH_V10
510 help
511 What DMA channel to use for ser2.
512
513config ETRAX_SERIAL_PORT2_NO_DMA_IN
514 bool "Ser2 uses no DMA for input"
515 help
516 Do not use DMA for ser2 input.
517
518config ETRAX_SERIAL_PORT2_DMA3_IN
519 bool "Ser2 uses DMA3 for input"
520 depends on ETRAXFS || ETRAX_ARCH_V10
521 help
522 Enables the DMA3 input channel for ser2 (ttyS2).
523 If you do not enable DMA, an interrupt for each character will be
524 used when receiving data.
525 Normally you want to use DMA, unless you use the DMA channel for
526 something else.
527
528config ETRAX_SERIAL_PORT2_DMA7_IN
529 bool "Ser2 uses DMA7 for input"
530 depends on CRIS_MACH_ARTPEC3
531 help
532 Enables the DMA7 input channel for ser2 (ttyS2).
533 If you do not enable DMA, an interrupt for each character will be
Matt LaPlante692105b2009-01-26 11:12:25 +0100534 used when receiving data.
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100535 Normally you want to use DMA, unless you use the DMA channel for
536 something else.
537
538endchoice
539
540choice
541 prompt "Ser3 DMA in channel"
542 depends on ETRAX_SERIAL_PORT3
543 default ETRAX_SERIAL_PORT3_NO_DMA_IN if ETRAX_ARCH_V32
544 default ETRAX_SERIAL_PORT3_DMA5_IN if ETRAX_ARCH_V10
545 help
546 What DMA channel to use for ser3.
547
548config ETRAX_SERIAL_PORT3_NO_DMA_IN
549 bool "Ser3 uses no DMA for input"
550 help
551 Do not use DMA for ser3 input.
552
553config ETRAX_SERIAL_PORT3_DMA5_IN
554 depends on ETRAX_ARCH_V10
555 bool "DMA 5"
556
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100557endchoice
558
559choice
560 prompt "Ser3 DMA out channel"
561 depends on ETRAX_SERIAL_PORT3
562 default ETRAX_SERIAL_PORT3_NO_DMA_OUT if ETRAX_ARCH_V32
563 default ETRAX_SERIAL_PORT3_DMA4_OUT if ETRAX_ARCH_V10
564
565config ETRAX_SERIAL_PORT3_NO_DMA_OUT
566 bool "Ser3 uses no DMA for output"
567 help
568 Do not use DMA for ser3 output.
569
570config ETRAX_SERIAL_PORT3_DMA4_OUT
571 depends on ETRAX_ARCH_V10
572 bool "DMA 4"
573
Jesper Nilsson923dd2a2007-12-05 18:10:36 +0100574endchoice
575
Linus Torvalds1da177e2005-04-16 15:20:36 -0700576endmenu
577
Geert Uytterhoevenacf83632013-05-14 13:54:21 +0200578source "drivers/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579
Linus Torvalds1da177e2005-04-16 15:20:36 -0700580source "fs/Kconfig"
581
Linus Torvalds1da177e2005-04-16 15:20:36 -0700582source "arch/cris/Kconfig.debug"
583
584source "security/Kconfig"
585
586source "crypto/Kconfig"
587
588source "lib/Kconfig"