blob: 1dc0519333f291ab859b58739e762b2aa5ae5834 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 Madge Horizon ATM Adapter driver.
3 Copyright (C) 1995-1999 Madge Networks Ltd.
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18
19 The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
20 system and in the file COPYING in the Linux kernel source.
21*/
22
23/*
24 IMPORTANT NOTE: Madge Networks no longer makes the adapters
25 supported by this driver and makes no commitment to maintain it.
26*/
27
28#include <linux/module.h>
29#include <linux/kernel.h>
30#include <linux/mm.h>
31#include <linux/pci.h>
32#include <linux/errno.h>
33#include <linux/atm.h>
34#include <linux/atmdev.h>
35#include <linux/sonet.h>
36#include <linux/skbuff.h>
37#include <linux/time.h>
38#include <linux/delay.h>
39#include <linux/uio.h>
40#include <linux/init.h>
Alexey Dobriyana6b7a402011-06-06 10:43:46 +000041#include <linux/interrupt.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070042#include <linux/ioport.h>
43#include <linux/wait.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090044#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070045
Linus Torvalds1da177e2005-04-16 15:20:36 -070046#include <asm/io.h>
Arun Sharma600634972011-07-26 16:09:06 -070047#include <linux/atomic.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070048#include <asm/uaccess.h>
49#include <asm/string.h>
50#include <asm/byteorder.h>
51
52#include "horizon.h"
53
54#define maintainer_string "Giuliano Procida at Madge Networks <gprocida@madge.com>"
55#define description_string "Madge ATM Horizon [Ultra] driver"
56#define version_string "1.2.1"
57
58static inline void __init show_version (void) {
59 printk ("%s version %s\n", description_string, version_string);
60}
61
62/*
63
64 CREDITS
65
66 Driver and documentation by:
67
68 Chris Aston Madge Networks
69 Giuliano Procida Madge Networks
70 Simon Benham Madge Networks
71 Simon Johnson Madge Networks
72 Various Others Madge Networks
73
74 Some inspiration taken from other drivers by:
75
76 Alexandru Cucos UTBv
77 Kari Mettinen University of Helsinki
78 Werner Almesberger EPFL LRC
79
80 Theory of Operation
81
82 I Hardware, detection, initialisation and shutdown.
83
84 1. Supported Hardware
85
86 This driver should handle all variants of the PCI Madge ATM adapters
87 with the Horizon chipset. These are all PCI cards supporting PIO, BM
88 DMA and a form of MMIO (registers only, not internal RAM).
89
90 The driver is only known to work with SONET and UTP Horizon Ultra
91 cards at 155Mb/s. However, code is in place to deal with both the
92 original Horizon and 25Mb/s operation.
93
94 There are two revisions of the Horizon ASIC: the original and the
95 Ultra. Details of hardware bugs are in section III.
96
97 The ASIC version can be distinguished by chip markings but is NOT
98 indicated by the PCI revision (all adapters seem to have PCI rev 1).
99
100 I believe that:
101
102 Horizon => Collage 25 PCI Adapter (UTP and STP)
103 Horizon Ultra => Collage 155 PCI Client (UTP or SONET)
104 Ambassador x => Collage 155 PCI Server (completely different)
105
106 Horizon (25Mb/s) is fitted with UTP and STP connectors. It seems to
107 have a Madge B154 plus glue logic serializer. I have also found a
108 really ancient version of this with slightly different glue. It
109 comes with the revision 0 (140-025-01) ASIC.
110
111 Horizon Ultra (155Mb/s) is fitted with either a Pulse Medialink
112 output (UTP) or an HP HFBR 5205 output (SONET). It has either
113 Madge's SAMBA framer or a SUNI-lite device (early versions). It
114 comes with the revision 1 (140-027-01) ASIC.
115
116 2. Detection
117
118 All Horizon-based cards present with the same PCI Vendor and Device
119 IDs. The standard Linux 2.2 PCI API is used to locate any cards and
120 to enable bus-mastering (with appropriate latency).
121
122 ATM_LAYER_STATUS in the control register distinguishes between the
123 two possible physical layers (25 and 155). It is not clear whether
124 the 155 cards can also operate at 25Mbps. We rely on the fact that a
125 card operates at 155 if and only if it has the newer Horizon Ultra
126 ASIC.
127
128 For 155 cards the two possible framers are probed for and then set
129 up for loop-timing.
130
131 3. Initialisation
132
133 The card is reset and then put into a known state. The physical
134 layer is configured for normal operation at the appropriate speed;
135 in the case of the 155 cards, the framer is initialised with
136 line-based timing; the internal RAM is zeroed and the allocation of
137 buffers for RX and TX is made; the Burnt In Address is read and
138 copied to the ATM ESI; various policy settings for RX (VPI bits,
139 unknown VCs, oam cells) are made. Ideally all policy items should be
140 configurable at module load (if not actually on-demand), however,
141 only the vpi vs vci bit allocation can be specified at insmod.
142
143 4. Shutdown
144
145 This is in response to module_cleaup. No VCs are in use and the card
146 should be idle; it is reset.
147
148 II Driver software (as it should be)
149
150 0. Traffic Parameters
151
152 The traffic classes (not an enumeration) are currently: ATM_NONE (no
153 traffic), ATM_UBR, ATM_CBR, ATM_VBR and ATM_ABR, ATM_ANYCLASS
154 (compatible with everything). Together with (perhaps only some of)
155 the following items they make up the traffic specification.
156
157 struct atm_trafprm {
158 unsigned char traffic_class; traffic class (ATM_UBR, ...)
159 int max_pcr; maximum PCR in cells per second
160 int pcr; desired PCR in cells per second
161 int min_pcr; minimum PCR in cells per second
162 int max_cdv; maximum CDV in microseconds
163 int max_sdu; maximum SDU in bytes
164 };
165
166 Note that these denote bandwidth available not bandwidth used; the
167 possibilities according to ATMF are:
168
169 Real Time (cdv and max CDT given)
170
171 CBR(pcr) pcr bandwidth always available
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300172 rtVBR(pcr,scr,mbs) scr bandwidth always available, up to pcr at mbs too
Linus Torvalds1da177e2005-04-16 15:20:36 -0700173
174 Non Real Time
175
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300176 nrtVBR(pcr,scr,mbs) scr bandwidth always available, up to pcr at mbs too
Linus Torvalds1da177e2005-04-16 15:20:36 -0700177 UBR()
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300178 ABR(mcr,pcr) mcr bandwidth always available, up to pcr (depending) too
Linus Torvalds1da177e2005-04-16 15:20:36 -0700179
180 mbs is max burst size (bucket)
181 pcr and scr have associated cdvt values
182 mcr is like scr but has no cdtv
183 cdtv may differ at each hop
184
185 Some of the above items are qos items (as opposed to traffic
186 parameters). We have nothing to do with qos. All except ABR can have
187 their traffic parameters converted to GCRA parameters. The GCRA may
188 be implemented as a (real-number) leaky bucket. The GCRA can be used
189 in complicated ways by switches and in simpler ways by end-stations.
190 It can be used both to filter incoming cells and shape out-going
191 cells.
192
193 ATM Linux actually supports:
194
195 ATM_NONE() (no traffic in this direction)
196 ATM_UBR(max_frame_size)
197 ATM_CBR(max/min_pcr, max_cdv, max_frame_size)
198
199 0 or ATM_MAX_PCR are used to indicate maximum available PCR
200
201 A traffic specification consists of the AAL type and separate
202 traffic specifications for either direction. In ATM Linux it is:
203
204 struct atm_qos {
205 struct atm_trafprm txtp;
206 struct atm_trafprm rxtp;
207 unsigned char aal;
208 };
209
210 AAL types are:
211
212 ATM_NO_AAL AAL not specified
213 ATM_AAL0 "raw" ATM cells
214 ATM_AAL1 AAL1 (CBR)
215 ATM_AAL2 AAL2 (VBR)
216 ATM_AAL34 AAL3/4 (data)
217 ATM_AAL5 AAL5 (data)
218 ATM_SAAL signaling AAL
219
220 The Horizon has support for AAL frame types: 0, 3/4 and 5. However,
221 it does not implement AAL 3/4 SAR and it has a different notion of
222 "raw cell" to ATM Linux's (48 bytes vs. 52 bytes) so neither are
223 supported by this driver.
224
225 The Horizon has limited support for ABR (including UBR), VBR and
226 CBR. Each TX channel has a bucket (containing up to 31 cell units)
227 and two timers (PCR and SCR) associated with it that can be used to
228 govern cell emissions and host notification (in the case of ABR this
229 is presumably so that RM cells may be emitted at appropriate times).
230 The timers may either be disabled or may be set to any of 240 values
231 (determined by the clock crystal, a fixed (?) per-device divider, a
232 configurable divider and a configurable timer preload value).
233
234 At the moment only UBR and CBR are supported by the driver. VBR will
235 be supported as soon as ATM for Linux supports it. ABR support is
236 very unlikely as RM cell handling is completely up to the driver.
237
238 1. TX (TX channel setup and TX transfer)
239
240 The TX half of the driver owns the TX Horizon registers. The TX
241 component in the IRQ handler is the BM completion handler. This can
242 only be entered when tx_busy is true (enforced by hardware). The
243 other TX component can only be entered when tx_busy is false
244 (enforced by driver). So TX is single-threaded.
245
246 Apart from a minor optimisation to not re-select the last channel,
247 the TX send component works as follows:
248
249 Atomic test and set tx_busy until we succeed; we should implement
250 some sort of timeout so that tx_busy will never be stuck at true.
251
252 If no TX channel is set up for this VC we wait for an idle one (if
253 necessary) and set it up.
254
255 At this point we have a TX channel ready for use. We wait for enough
256 buffers to become available then start a TX transmit (set the TX
257 descriptor, schedule transfer, exit).
258
259 The IRQ component handles TX completion (stats, free buffer, tx_busy
260 unset, exit). We also re-schedule further transfers for the same
261 frame if needed.
262
263 TX setup in more detail:
264
265 TX open is a nop, the relevant information is held in the hrz_vcc
266 (vcc->dev_data) structure and is "cached" on the card.
267
268 TX close gets the TX lock and clears the channel from the "cache".
269
270 2. RX (Data Available and RX transfer)
271
272 The RX half of the driver owns the RX registers. There are two RX
273 components in the IRQ handler: the data available handler deals with
274 fresh data that has arrived on the card, the BM completion handler
275 is very similar to the TX completion handler. The data available
276 handler grabs the rx_lock and it is only released once the data has
277 been discarded or completely transferred to the host. The BM
278 completion handler only runs when the lock is held; the data
279 available handler is locked out over the same period.
280
281 Data available on the card triggers an interrupt. If the data is not
282 suitable for our existing RX channels or we cannot allocate a buffer
283 it is flushed. Otherwise an RX receive is scheduled. Multiple RX
284 transfers may be scheduled for the same frame.
285
286 RX setup in more detail:
287
288 RX open...
289 RX close...
290
291 III Hardware Bugs
292
293 0. Byte vs Word addressing of adapter RAM.
294
295 A design feature; see the .h file (especially the memory map).
296
297 1. Bus Master Data Transfers (original Horizon only, fixed in Ultra)
298
299 The host must not start a transmit direction transfer at a
300 non-four-byte boundary in host memory. Instead the host should
301 perform a byte, or a two byte, or one byte followed by two byte
302 transfer in order to start the rest of the transfer on a four byte
303 boundary. RX is OK.
304
305 Simultaneous transmit and receive direction bus master transfers are
306 not allowed.
307
308 The simplest solution to these two is to always do PIO (never DMA)
309 in the TX direction on the original Horizon. More complicated
310 solutions are likely to hurt my brain.
311
312 2. Loss of buffer on close VC
313
314 When a VC is being closed, the buffer associated with it is not
315 returned to the pool. The host must store the reference to this
316 buffer and when opening a new VC then give it to that new VC.
317
318 The host intervention currently consists of stacking such a buffer
319 pointer at VC close and checking the stack at VC open.
320
321 3. Failure to close a VC
322
323 If a VC is currently receiving a frame then closing the VC may fail
324 and the frame continues to be received.
325
326 The solution is to make sure any received frames are flushed when
327 ready. This is currently done just before the solution to 2.
328
329 4. PCI bus (original Horizon only, fixed in Ultra)
330
331 Reading from the data port prior to initialisation will hang the PCI
332 bus. Just don't do that then! We don't.
333
334 IV To Do List
335
336 . Timer code may be broken.
337
338 . Allow users to specify buffer allocation split for TX and RX.
339
340 . Deal once and for all with buggy VC close.
341
342 . Handle interrupted and/or non-blocking operations.
343
344 . Change some macros to functions and move from .h to .c.
345
346 . Try to limit the number of TX frames each VC may have queued, in
347 order to reduce the chances of TX buffer exhaustion.
348
349 . Implement VBR (bucket and timers not understood) and ABR (need to
350 do RM cells manually); also no Linux support for either.
351
352 . Implement QoS changes on open VCs (involves extracting parts of VC open
353 and close into separate functions and using them to make changes).
354
355*/
356
357/********** globals **********/
358
359static void do_housekeeping (unsigned long arg);
360
361static unsigned short debug = 0;
362static unsigned short vpi_bits = 0;
363static int max_tx_size = 9000;
364static int max_rx_size = 9000;
365static unsigned char pci_lat = 0;
366
367/********** access functions **********/
368
369/* Read / Write Horizon registers */
370static inline void wr_regl (const hrz_dev * dev, unsigned char reg, u32 data) {
371 outl (cpu_to_le32 (data), dev->iobase + reg);
372}
373
374static inline u32 rd_regl (const hrz_dev * dev, unsigned char reg) {
375 return le32_to_cpu (inl (dev->iobase + reg));
376}
377
378static inline void wr_regw (const hrz_dev * dev, unsigned char reg, u16 data) {
379 outw (cpu_to_le16 (data), dev->iobase + reg);
380}
381
382static inline u16 rd_regw (const hrz_dev * dev, unsigned char reg) {
383 return le16_to_cpu (inw (dev->iobase + reg));
384}
385
386static inline void wrs_regb (const hrz_dev * dev, unsigned char reg, void * addr, u32 len) {
387 outsb (dev->iobase + reg, addr, len);
388}
389
390static inline void rds_regb (const hrz_dev * dev, unsigned char reg, void * addr, u32 len) {
391 insb (dev->iobase + reg, addr, len);
392}
393
394/* Read / Write to a given address in Horizon buffer memory.
395 Interrupts must be disabled between the address register and data
396 port accesses as these must form an atomic operation. */
397static inline void wr_mem (const hrz_dev * dev, HDW * addr, u32 data) {
398 // wr_regl (dev, MEM_WR_ADDR_REG_OFF, (u32) addr);
399 wr_regl (dev, MEM_WR_ADDR_REG_OFF, (addr - (HDW *) 0) * sizeof(HDW));
400 wr_regl (dev, MEMORY_PORT_OFF, data);
401}
402
403static inline u32 rd_mem (const hrz_dev * dev, HDW * addr) {
404 // wr_regl (dev, MEM_RD_ADDR_REG_OFF, (u32) addr);
405 wr_regl (dev, MEM_RD_ADDR_REG_OFF, (addr - (HDW *) 0) * sizeof(HDW));
406 return rd_regl (dev, MEMORY_PORT_OFF);
407}
408
409static inline void wr_framer (const hrz_dev * dev, u32 addr, u32 data) {
410 wr_regl (dev, MEM_WR_ADDR_REG_OFF, (u32) addr | 0x80000000);
411 wr_regl (dev, MEMORY_PORT_OFF, data);
412}
413
414static inline u32 rd_framer (const hrz_dev * dev, u32 addr) {
415 wr_regl (dev, MEM_RD_ADDR_REG_OFF, (u32) addr | 0x80000000);
416 return rd_regl (dev, MEMORY_PORT_OFF);
417}
418
419/********** specialised access functions **********/
420
421/* RX */
422
423static inline void FLUSH_RX_CHANNEL (hrz_dev * dev, u16 channel) {
424 wr_regw (dev, RX_CHANNEL_PORT_OFF, FLUSH_CHANNEL | channel);
425 return;
426}
427
Denys Vlasenko2cf83af2008-04-13 21:54:34 -0700428static void WAIT_FLUSH_RX_COMPLETE (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429 while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & FLUSH_CHANNEL)
430 ;
431 return;
432}
433
434static inline void SELECT_RX_CHANNEL (hrz_dev * dev, u16 channel) {
435 wr_regw (dev, RX_CHANNEL_PORT_OFF, channel);
436 return;
437}
438
Denys Vlasenko2cf83af2008-04-13 21:54:34 -0700439static void WAIT_UPDATE_COMPLETE (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 while (rd_regw (dev, RX_CHANNEL_PORT_OFF) & RX_CHANNEL_UPDATE_IN_PROGRESS)
441 ;
442 return;
443}
444
445/* TX */
446
447static inline void SELECT_TX_CHANNEL (hrz_dev * dev, u16 tx_channel) {
448 wr_regl (dev, TX_CHANNEL_PORT_OFF, tx_channel);
449 return;
450}
451
452/* Update or query one configuration parameter of a particular channel. */
453
454static inline void update_tx_channel_config (hrz_dev * dev, short chan, u8 mode, u16 value) {
455 wr_regw (dev, TX_CHANNEL_CONFIG_COMMAND_OFF,
456 chan * TX_CHANNEL_CONFIG_MULT | mode);
457 wr_regw (dev, TX_CHANNEL_CONFIG_DATA_OFF, value);
458 return;
459}
460
461static inline u16 query_tx_channel_config (hrz_dev * dev, short chan, u8 mode) {
462 wr_regw (dev, TX_CHANNEL_CONFIG_COMMAND_OFF,
463 chan * TX_CHANNEL_CONFIG_MULT | mode);
464 return rd_regw (dev, TX_CHANNEL_CONFIG_DATA_OFF);
465}
466
467/********** dump functions **********/
468
469static inline void dump_skb (char * prefix, unsigned int vc, struct sk_buff * skb) {
470#ifdef DEBUG_HORIZON
471 unsigned int i;
472 unsigned char * data = skb->data;
473 PRINTDB (DBG_DATA, "%s(%u) ", prefix, vc);
474 for (i=0; i<skb->len && i < 256;i++)
475 PRINTDM (DBG_DATA, "%02x ", data[i]);
476 PRINTDE (DBG_DATA,"");
477#else
478 (void) prefix;
479 (void) vc;
480 (void) skb;
481#endif
482 return;
483}
484
485static inline void dump_regs (hrz_dev * dev) {
486#ifdef DEBUG_HORIZON
487 PRINTD (DBG_REGS, "CONTROL 0: %#x", rd_regl (dev, CONTROL_0_REG));
488 PRINTD (DBG_REGS, "RX CONFIG: %#x", rd_regw (dev, RX_CONFIG_OFF));
489 PRINTD (DBG_REGS, "TX CONFIG: %#x", rd_regw (dev, TX_CONFIG_OFF));
490 PRINTD (DBG_REGS, "TX STATUS: %#x", rd_regw (dev, TX_STATUS_OFF));
491 PRINTD (DBG_REGS, "IRQ ENBLE: %#x", rd_regl (dev, INT_ENABLE_REG_OFF));
492 PRINTD (DBG_REGS, "IRQ SORCE: %#x", rd_regl (dev, INT_SOURCE_REG_OFF));
493#else
494 (void) dev;
495#endif
496 return;
497}
498
499static inline void dump_framer (hrz_dev * dev) {
500#ifdef DEBUG_HORIZON
501 unsigned int i;
502 PRINTDB (DBG_REGS, "framer registers:");
503 for (i = 0; i < 0x10; ++i)
504 PRINTDM (DBG_REGS, " %02x", rd_framer (dev, i));
505 PRINTDE (DBG_REGS,"");
506#else
507 (void) dev;
508#endif
509 return;
510}
511
512/********** VPI/VCI <-> (RX) channel conversions **********/
513
514/* RX channels are 10 bit integers, these fns are quite paranoid */
515
516static inline int channel_to_vpivci (const u16 channel, short * vpi, int * vci) {
517 unsigned short vci_bits = 10 - vpi_bits;
518 if ((channel & RX_CHANNEL_MASK) == channel) {
519 *vci = channel & ((~0)<<vci_bits);
520 *vpi = channel >> vci_bits;
521 return channel ? 0 : -EINVAL;
522 }
523 return -EINVAL;
524}
525
526static inline int vpivci_to_channel (u16 * channel, const short vpi, const int vci) {
527 unsigned short vci_bits = 10 - vpi_bits;
528 if (0 <= vpi && vpi < 1<<vpi_bits && 0 <= vci && vci < 1<<vci_bits) {
529 *channel = vpi<<vci_bits | vci;
530 return *channel ? 0 : -EINVAL;
531 }
532 return -EINVAL;
533}
534
535/********** decode RX queue entries **********/
536
537static inline u16 rx_q_entry_to_length (u32 x) {
538 return x & RX_Q_ENTRY_LENGTH_MASK;
539}
540
541static inline u16 rx_q_entry_to_rx_channel (u32 x) {
542 return (x>>RX_Q_ENTRY_CHANNEL_SHIFT) & RX_CHANNEL_MASK;
543}
544
545/* Cell Transmit Rate Values
546 *
547 * the cell transmit rate (cells per sec) can be set to a variety of
548 * different values by specifying two parameters: a timer preload from
549 * 1 to 16 (stored as 0 to 15) and a clock divider (2 to the power of
550 * an exponent from 0 to 14; the special value 15 disables the timer).
551 *
552 * cellrate = baserate / (preload * 2^divider)
553 *
554 * The maximum cell rate that can be specified is therefore just the
555 * base rate. Halving the preload is equivalent to adding 1 to the
556 * divider and so values 1 to 8 of the preload are redundant except
557 * in the case of a maximal divider (14).
558 *
559 * Given a desired cell rate, an algorithm to determine the preload
560 * and divider is:
561 *
562 * a) x = baserate / cellrate, want p * 2^d = x (as far as possible)
563 * b) if x > 16 * 2^14 then set p = 16, d = 14 (min rate), done
564 * if x <= 16 then set p = x, d = 0 (high rates), done
565 * c) now have 16 < x <= 2^18, or 1 < x/16 <= 2^14 and we want to
566 * know n such that 2^(n-1) < x/16 <= 2^n, so slide a bit until
567 * we find the range (n will be between 1 and 14), set d = n
568 * d) Also have 8 < x/2^n <= 16, so set p nearest x/2^n
569 *
570 * The algorithm used below is a minor variant of the above.
571 *
572 * The base rate is derived from the oscillator frequency (Hz) using a
573 * fixed divider:
574 *
575 * baserate = freq / 32 in the case of some Unknown Card
576 * baserate = freq / 8 in the case of the Horizon 25
577 * baserate = freq / 8 in the case of the Horizon Ultra 155
578 *
579 * The Horizon cards have oscillators and base rates as follows:
580 *
581 * Card Oscillator Base Rate
582 * Unknown Card 33 MHz 1.03125 MHz (33 MHz = PCI freq)
583 * Horizon 25 32 MHz 4 MHz
584 * Horizon Ultra 155 40 MHz 5 MHz
585 *
586 * The following defines give the base rates in Hz. These were
587 * previously a factor of 100 larger, no doubt someone was using
588 * cps*100.
589 */
590
591#define BR_UKN 1031250l
592#define BR_HRZ 4000000l
593#define BR_ULT 5000000l
594
595// d is an exponent
596#define CR_MIND 0
597#define CR_MAXD 14
598
599// p ranges from 1 to a power of 2
600#define CR_MAXPEXP 4
601
602static int make_rate (const hrz_dev * dev, u32 c, rounding r,
603 u16 * bits, unsigned int * actual)
604{
605 // note: rounding the rate down means rounding 'p' up
606 const unsigned long br = test_bit(ultra, &dev->flags) ? BR_ULT : BR_HRZ;
607
608 u32 div = CR_MIND;
609 u32 pre;
610
611 // br_exp and br_man are used to avoid overflowing (c*maxp*2^d) in
612 // the tests below. We could think harder about exact possibilities
613 // of failure...
614
615 unsigned long br_man = br;
616 unsigned int br_exp = 0;
617
618 PRINTD (DBG_QOS|DBG_FLOW, "make_rate b=%lu, c=%u, %s", br, c,
619 r == round_up ? "up" : r == round_down ? "down" : "nearest");
620
621 // avoid div by zero
622 if (!c) {
623 PRINTD (DBG_QOS|DBG_ERR, "zero rate is not allowed!");
624 return -EINVAL;
625 }
626
627 while (br_exp < CR_MAXPEXP + CR_MIND && (br_man % 2 == 0)) {
628 br_man = br_man >> 1;
629 ++br_exp;
630 }
631 // (br >>br_exp) <<br_exp == br and
632 // br_exp <= CR_MAXPEXP+CR_MIND
633
634 if (br_man <= (c << (CR_MAXPEXP+CR_MIND-br_exp))) {
635 // Equivalent to: B <= (c << (MAXPEXP+MIND))
636 // take care of rounding
637 switch (r) {
638 case round_down:
Julia Lawall6a193092008-09-22 19:22:58 -0700639 pre = DIV_ROUND_UP(br, c<<div);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700640 // but p must be non-zero
641 if (!pre)
642 pre = 1;
643 break;
644 case round_nearest:
Julia Lawall8b97c7c2009-08-01 22:48:45 +0000645 pre = DIV_ROUND_CLOSEST(br, c<<div);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700646 // but p must be non-zero
647 if (!pre)
648 pre = 1;
649 break;
650 default: /* round_up */
651 pre = br/(c<<div);
652 // but p must be non-zero
653 if (!pre)
654 return -EINVAL;
655 }
656 PRINTD (DBG_QOS, "A: p=%u, d=%u", pre, div);
657 goto got_it;
658 }
659
660 // at this point we have
661 // d == MIND and (c << (MAXPEXP+MIND)) < B
662 while (div < CR_MAXD) {
663 div++;
664 if (br_man <= (c << (CR_MAXPEXP+div-br_exp))) {
665 // Equivalent to: B <= (c << (MAXPEXP+d))
666 // c << (MAXPEXP+d-1) < B <= c << (MAXPEXP+d)
667 // 1 << (MAXPEXP-1) < B/2^d/c <= 1 << MAXPEXP
668 // MAXP/2 < B/c2^d <= MAXP
669 // take care of rounding
670 switch (r) {
671 case round_down:
Julia Lawall6a193092008-09-22 19:22:58 -0700672 pre = DIV_ROUND_UP(br, c<<div);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700673 break;
674 case round_nearest:
Julia Lawall8b97c7c2009-08-01 22:48:45 +0000675 pre = DIV_ROUND_CLOSEST(br, c<<div);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700676 break;
677 default: /* round_up */
678 pre = br/(c<<div);
679 }
680 PRINTD (DBG_QOS, "B: p=%u, d=%u", pre, div);
681 goto got_it;
682 }
683 }
684 // at this point we have
685 // d == MAXD and (c << (MAXPEXP+MAXD)) < B
686 // but we cannot go any higher
687 // take care of rounding
688 if (r == round_down)
689 return -EINVAL;
690 pre = 1 << CR_MAXPEXP;
691 PRINTD (DBG_QOS, "C: p=%u, d=%u", pre, div);
692got_it:
693 // paranoia
694 if (div > CR_MAXD || (!pre) || pre > 1<<CR_MAXPEXP) {
695 PRINTD (DBG_QOS, "set_cr internal failure: d=%u p=%u",
696 div, pre);
697 return -EINVAL;
698 } else {
699 if (bits)
700 *bits = (div<<CLOCK_SELECT_SHIFT) | (pre-1);
701 if (actual) {
Julia Lawall6a193092008-09-22 19:22:58 -0700702 *actual = DIV_ROUND_UP(br, pre<<div);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700703 PRINTD (DBG_QOS, "actual rate: %u", *actual);
704 }
705 return 0;
706 }
707}
708
709static int make_rate_with_tolerance (const hrz_dev * dev, u32 c, rounding r, unsigned int tol,
710 u16 * bit_pattern, unsigned int * actual) {
711 unsigned int my_actual;
712
713 PRINTD (DBG_QOS|DBG_FLOW, "make_rate_with_tolerance c=%u, %s, tol=%u",
714 c, (r == round_up) ? "up" : (r == round_down) ? "down" : "nearest", tol);
715
716 if (!actual)
717 // actual rate is not returned
718 actual = &my_actual;
719
720 if (make_rate (dev, c, round_nearest, bit_pattern, actual))
721 // should never happen as round_nearest always succeeds
722 return -1;
723
724 if (c - tol <= *actual && *actual <= c + tol)
725 // within tolerance
726 return 0;
727 else
728 // intolerant, try rounding instead
729 return make_rate (dev, c, r, bit_pattern, actual);
730}
731
732/********** Listen on a VC **********/
733
734static int hrz_open_rx (hrz_dev * dev, u16 channel) {
735 // is there any guarantee that we don't get two simulataneous
736 // identical calls of this function from different processes? yes
737 // rate_lock
738 unsigned long flags;
739 u32 channel_type; // u16?
740
741 u16 buf_ptr = RX_CHANNEL_IDLE;
742
743 rx_ch_desc * rx_desc = &memmap->rx_descs[channel];
744
745 PRINTD (DBG_FLOW, "hrz_open_rx %x", channel);
746
747 spin_lock_irqsave (&dev->mem_lock, flags);
748 channel_type = rd_mem (dev, &rx_desc->wr_buf_type) & BUFFER_PTR_MASK;
749 spin_unlock_irqrestore (&dev->mem_lock, flags);
750
751 // very serious error, should never occur
752 if (channel_type != RX_CHANNEL_DISABLED) {
753 PRINTD (DBG_ERR|DBG_VCC, "RX channel for VC already open");
754 return -EBUSY; // clean up?
755 }
756
757 // Give back spare buffer
758 if (dev->noof_spare_buffers) {
759 buf_ptr = dev->spare_buffers[--dev->noof_spare_buffers];
760 PRINTD (DBG_VCC, "using a spare buffer: %u", buf_ptr);
761 // should never occur
762 if (buf_ptr == RX_CHANNEL_DISABLED || buf_ptr == RX_CHANNEL_IDLE) {
763 // but easy to recover from
764 PRINTD (DBG_ERR|DBG_VCC, "bad spare buffer pointer, using IDLE");
765 buf_ptr = RX_CHANNEL_IDLE;
766 }
767 } else {
768 PRINTD (DBG_VCC, "using IDLE buffer pointer");
769 }
770
771 // Channel is currently disabled so change its status to idle
772
773 // do we really need to save the flags again?
774 spin_lock_irqsave (&dev->mem_lock, flags);
775
776 wr_mem (dev, &rx_desc->wr_buf_type,
777 buf_ptr | CHANNEL_TYPE_AAL5 | FIRST_CELL_OF_AAL5_FRAME);
778 if (buf_ptr != RX_CHANNEL_IDLE)
779 wr_mem (dev, &rx_desc->rd_buf_type, buf_ptr);
780
781 spin_unlock_irqrestore (&dev->mem_lock, flags);
782
783 // rxer->rate = make_rate (qos->peak_cells);
784
785 PRINTD (DBG_FLOW, "hrz_open_rx ok");
786
787 return 0;
788}
789
790#if 0
791/********** change vc rate for a given vc **********/
792
793static void hrz_change_vc_qos (ATM_RXER * rxer, MAAL_QOS * qos) {
794 rxer->rate = make_rate (qos->peak_cells);
795}
796#endif
797
798/********** free an skb (as per ATM device driver documentation) **********/
799
Denys Vlasenko2cf83af2008-04-13 21:54:34 -0700800static void hrz_kfree_skb (struct sk_buff * skb) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700801 if (ATM_SKB(skb)->vcc->pop) {
802 ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb);
803 } else {
804 dev_kfree_skb_any (skb);
805 }
806}
807
808/********** cancel listen on a VC **********/
809
810static void hrz_close_rx (hrz_dev * dev, u16 vc) {
811 unsigned long flags;
812
813 u32 value;
814
815 u32 r1, r2;
816
817 rx_ch_desc * rx_desc = &memmap->rx_descs[vc];
818
819 int was_idle = 0;
820
821 spin_lock_irqsave (&dev->mem_lock, flags);
822 value = rd_mem (dev, &rx_desc->wr_buf_type) & BUFFER_PTR_MASK;
823 spin_unlock_irqrestore (&dev->mem_lock, flags);
824
825 if (value == RX_CHANNEL_DISABLED) {
826 // I suppose this could happen once we deal with _NONE traffic properly
827 PRINTD (DBG_VCC, "closing VC: RX channel %u already disabled", vc);
828 return;
829 }
830 if (value == RX_CHANNEL_IDLE)
831 was_idle = 1;
832
833 spin_lock_irqsave (&dev->mem_lock, flags);
834
835 for (;;) {
836 wr_mem (dev, &rx_desc->wr_buf_type, RX_CHANNEL_DISABLED);
837
838 if ((rd_mem (dev, &rx_desc->wr_buf_type) & BUFFER_PTR_MASK) == RX_CHANNEL_DISABLED)
839 break;
840
841 was_idle = 0;
842 }
843
844 if (was_idle) {
845 spin_unlock_irqrestore (&dev->mem_lock, flags);
846 return;
847 }
848
849 WAIT_FLUSH_RX_COMPLETE(dev);
850
851 // XXX Is this all really necessary? We can rely on the rx_data_av
852 // handler to discard frames that remain queued for delivery. If the
853 // worry is that immediately reopening the channel (perhaps by a
854 // different process) may cause some data to be mis-delivered then
855 // there may still be a simpler solution (such as busy-waiting on
856 // rx_busy once the channel is disabled or before a new one is
857 // opened - does this leave any holes?). Arguably setting up and
858 // tearing down the TX and RX halves of each virtual circuit could
859 // most safely be done within ?x_busy protected regions.
860
861 // OK, current changes are that Simon's marker is disabled and we DO
862 // look for NULL rxer elsewhere. The code here seems flush frames
863 // and then remember the last dead cell belonging to the channel
864 // just disabled - the cell gets relinked at the next vc_open.
865 // However, when all VCs are closed or only a few opened there are a
866 // handful of buffers that are unusable.
867
868 // Does anyone feel like documenting spare_buffers properly?
869 // Does anyone feel like fixing this in a nicer way?
870
871 // Flush any data which is left in the channel
872 for (;;) {
873 // Change the rx channel port to something different to the RX
874 // channel we are trying to close to force Horizon to flush the rx
875 // channel read and write pointers.
876
877 u16 other = vc^(RX_CHANS/2);
878
879 SELECT_RX_CHANNEL (dev, other);
880 WAIT_UPDATE_COMPLETE (dev);
881
882 r1 = rd_mem (dev, &rx_desc->rd_buf_type);
883
884 // Select this RX channel. Flush doesn't seem to work unless we
885 // select an RX channel before hand
886
887 SELECT_RX_CHANNEL (dev, vc);
888 WAIT_UPDATE_COMPLETE (dev);
889
890 // Attempt to flush a frame on this RX channel
891
892 FLUSH_RX_CHANNEL (dev, vc);
893 WAIT_FLUSH_RX_COMPLETE (dev);
894
895 // Force Horizon to flush rx channel read and write pointers as before
896
897 SELECT_RX_CHANNEL (dev, other);
898 WAIT_UPDATE_COMPLETE (dev);
899
900 r2 = rd_mem (dev, &rx_desc->rd_buf_type);
901
902 PRINTD (DBG_VCC|DBG_RX, "r1 = %u, r2 = %u", r1, r2);
903
904 if (r1 == r2) {
905 dev->spare_buffers[dev->noof_spare_buffers++] = (u16)r1;
906 break;
907 }
908 }
909
910#if 0
911 {
912 rx_q_entry * wr_ptr = &memmap->rx_q_entries[rd_regw (dev, RX_QUEUE_WR_PTR_OFF)];
913 rx_q_entry * rd_ptr = dev->rx_q_entry;
914
915 PRINTD (DBG_VCC|DBG_RX, "rd_ptr = %u, wr_ptr = %u", rd_ptr, wr_ptr);
916
917 while (rd_ptr != wr_ptr) {
918 u32 x = rd_mem (dev, (HDW *) rd_ptr);
919
920 if (vc == rx_q_entry_to_rx_channel (x)) {
921 x |= SIMONS_DODGEY_MARKER;
922
923 PRINTD (DBG_RX|DBG_VCC|DBG_WARN, "marking a frame as dodgey");
924
925 wr_mem (dev, (HDW *) rd_ptr, x);
926 }
927
928 if (rd_ptr == dev->rx_q_wrap)
929 rd_ptr = dev->rx_q_reset;
930 else
931 rd_ptr++;
932 }
933 }
934#endif
935
936 spin_unlock_irqrestore (&dev->mem_lock, flags);
937
938 return;
939}
940
941/********** schedule RX transfers **********/
942
943// Note on tail recursion: a GCC developer said that it is not likely
944// to be fixed soon, so do not define TAILRECUSRIONWORKS unless you
945// are sure it does as you may otherwise overflow the kernel stack.
946
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300947// giving this fn a return value would help GCC, allegedly
Linus Torvalds1da177e2005-04-16 15:20:36 -0700948
949static void rx_schedule (hrz_dev * dev, int irq) {
950 unsigned int rx_bytes;
951
952 int pio_instead = 0;
953#ifndef TAILRECURSIONWORKS
954 pio_instead = 1;
955 while (pio_instead) {
956#endif
957 // bytes waiting for RX transfer
958 rx_bytes = dev->rx_bytes;
959
960#if 0
961 spin_count = 0;
962 while (rd_regl (dev, MASTER_RX_COUNT_REG_OFF)) {
963 PRINTD (DBG_RX|DBG_WARN, "RX error: other PCI Bus Master RX still in progress!");
964 if (++spin_count > 10) {
965 PRINTD (DBG_RX|DBG_ERR, "spun out waiting PCI Bus Master RX completion");
966 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0);
967 clear_bit (rx_busy, &dev->flags);
968 hrz_kfree_skb (dev->rx_skb);
969 return;
970 }
971 }
972#endif
973
974 // this code follows the TX code but (at the moment) there is only
975 // one region - the skb itself. I don't know if this will change,
976 // but it doesn't hurt to have the code here, disabled.
977
978 if (rx_bytes) {
979 // start next transfer within same region
980 if (rx_bytes <= MAX_PIO_COUNT) {
981 PRINTD (DBG_RX|DBG_BUS, "(pio)");
982 pio_instead = 1;
983 }
984 if (rx_bytes <= MAX_TRANSFER_COUNT) {
985 PRINTD (DBG_RX|DBG_BUS, "(simple or last multi)");
986 dev->rx_bytes = 0;
987 } else {
988 PRINTD (DBG_RX|DBG_BUS, "(continuing multi)");
989 dev->rx_bytes = rx_bytes - MAX_TRANSFER_COUNT;
990 rx_bytes = MAX_TRANSFER_COUNT;
991 }
992 } else {
993 // rx_bytes == 0 -- we're between regions
994 // regions remaining to transfer
995#if 0
996 unsigned int rx_regions = dev->rx_regions;
997#else
998 unsigned int rx_regions = 0;
999#endif
1000
1001 if (rx_regions) {
1002#if 0
1003 // start a new region
1004 dev->rx_addr = dev->rx_iovec->iov_base;
1005 rx_bytes = dev->rx_iovec->iov_len;
1006 ++dev->rx_iovec;
1007 dev->rx_regions = rx_regions - 1;
1008
1009 if (rx_bytes <= MAX_PIO_COUNT) {
1010 PRINTD (DBG_RX|DBG_BUS, "(pio)");
1011 pio_instead = 1;
1012 }
1013 if (rx_bytes <= MAX_TRANSFER_COUNT) {
1014 PRINTD (DBG_RX|DBG_BUS, "(full region)");
1015 dev->rx_bytes = 0;
1016 } else {
1017 PRINTD (DBG_RX|DBG_BUS, "(start multi region)");
1018 dev->rx_bytes = rx_bytes - MAX_TRANSFER_COUNT;
1019 rx_bytes = MAX_TRANSFER_COUNT;
1020 }
1021#endif
1022 } else {
1023 // rx_regions == 0
1024 // that's all folks - end of frame
1025 struct sk_buff * skb = dev->rx_skb;
1026 // dev->rx_iovec = 0;
1027
1028 FLUSH_RX_CHANNEL (dev, dev->rx_channel);
1029
1030 dump_skb ("<<<", dev->rx_channel, skb);
1031
1032 PRINTD (DBG_RX|DBG_SKB, "push %p %u", skb->data, skb->len);
1033
1034 {
1035 struct atm_vcc * vcc = ATM_SKB(skb)->vcc;
1036 // VC layer stats
1037 atomic_inc(&vcc->stats->rx);
Patrick McHardya61bbcf2005-08-14 17:24:31 -07001038 __net_timestamp(skb);
Lucas De Marchi25985ed2011-03-30 22:57:33 -03001039 // end of our responsibility
Linus Torvalds1da177e2005-04-16 15:20:36 -07001040 vcc->push (vcc, skb);
1041 }
1042 }
1043 }
1044
1045 // note: writing RX_COUNT clears any interrupt condition
1046 if (rx_bytes) {
1047 if (pio_instead) {
1048 if (irq)
1049 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0);
1050 rds_regb (dev, DATA_PORT_OFF, dev->rx_addr, rx_bytes);
1051 } else {
1052 wr_regl (dev, MASTER_RX_ADDR_REG_OFF, virt_to_bus (dev->rx_addr));
1053 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, rx_bytes);
1054 }
1055 dev->rx_addr += rx_bytes;
1056 } else {
1057 if (irq)
1058 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0);
1059 // allow another RX thread to start
1060 YELLOW_LED_ON(dev);
1061 clear_bit (rx_busy, &dev->flags);
1062 PRINTD (DBG_RX, "cleared rx_busy for dev %p", dev);
1063 }
1064
1065#ifdef TAILRECURSIONWORKS
1066 // and we all bless optimised tail calls
1067 if (pio_instead)
1068 return rx_schedule (dev, 0);
1069 return;
1070#else
1071 // grrrrrrr!
1072 irq = 0;
1073 }
1074 return;
1075#endif
1076}
1077
1078/********** handle RX bus master complete events **********/
1079
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001080static void rx_bus_master_complete_handler (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001081 if (test_bit (rx_busy, &dev->flags)) {
1082 rx_schedule (dev, 1);
1083 } else {
1084 PRINTD (DBG_RX|DBG_ERR, "unexpected RX bus master completion");
1085 // clear interrupt condition on adapter
1086 wr_regl (dev, MASTER_RX_COUNT_REG_OFF, 0);
1087 }
1088 return;
1089}
1090
1091/********** (queue to) become the next TX thread **********/
1092
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001093static int tx_hold (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001094 PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags);
1095 wait_event_interruptible(dev->tx_queue, (!test_and_set_bit(tx_busy, &dev->flags)));
1096 PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags);
1097 if (signal_pending (current))
1098 return -1;
1099 PRINTD (DBG_TX, "set tx_busy for dev %p", dev);
1100 return 0;
1101}
1102
1103/********** allow another TX thread to start **********/
1104
1105static inline void tx_release (hrz_dev * dev) {
1106 clear_bit (tx_busy, &dev->flags);
1107 PRINTD (DBG_TX, "cleared tx_busy for dev %p", dev);
1108 wake_up_interruptible (&dev->tx_queue);
1109}
1110
1111/********** schedule TX transfers **********/
1112
1113static void tx_schedule (hrz_dev * const dev, int irq) {
1114 unsigned int tx_bytes;
1115
1116 int append_desc = 0;
1117
1118 int pio_instead = 0;
1119#ifndef TAILRECURSIONWORKS
1120 pio_instead = 1;
1121 while (pio_instead) {
1122#endif
1123 // bytes in current region waiting for TX transfer
1124 tx_bytes = dev->tx_bytes;
1125
1126#if 0
1127 spin_count = 0;
1128 while (rd_regl (dev, MASTER_TX_COUNT_REG_OFF)) {
1129 PRINTD (DBG_TX|DBG_WARN, "TX error: other PCI Bus Master TX still in progress!");
1130 if (++spin_count > 10) {
1131 PRINTD (DBG_TX|DBG_ERR, "spun out waiting PCI Bus Master TX completion");
1132 wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0);
1133 tx_release (dev);
1134 hrz_kfree_skb (dev->tx_skb);
1135 return;
1136 }
1137 }
1138#endif
1139
1140 if (tx_bytes) {
1141 // start next transfer within same region
1142 if (!test_bit (ultra, &dev->flags) || tx_bytes <= MAX_PIO_COUNT) {
1143 PRINTD (DBG_TX|DBG_BUS, "(pio)");
1144 pio_instead = 1;
1145 }
1146 if (tx_bytes <= MAX_TRANSFER_COUNT) {
1147 PRINTD (DBG_TX|DBG_BUS, "(simple or last multi)");
1148 if (!dev->tx_iovec) {
1149 // end of last region
1150 append_desc = 1;
1151 }
1152 dev->tx_bytes = 0;
1153 } else {
1154 PRINTD (DBG_TX|DBG_BUS, "(continuing multi)");
1155 dev->tx_bytes = tx_bytes - MAX_TRANSFER_COUNT;
1156 tx_bytes = MAX_TRANSFER_COUNT;
1157 }
1158 } else {
1159 // tx_bytes == 0 -- we're between regions
1160 // regions remaining to transfer
1161 unsigned int tx_regions = dev->tx_regions;
1162
1163 if (tx_regions) {
1164 // start a new region
1165 dev->tx_addr = dev->tx_iovec->iov_base;
1166 tx_bytes = dev->tx_iovec->iov_len;
1167 ++dev->tx_iovec;
1168 dev->tx_regions = tx_regions - 1;
1169
1170 if (!test_bit (ultra, &dev->flags) || tx_bytes <= MAX_PIO_COUNT) {
1171 PRINTD (DBG_TX|DBG_BUS, "(pio)");
1172 pio_instead = 1;
1173 }
1174 if (tx_bytes <= MAX_TRANSFER_COUNT) {
1175 PRINTD (DBG_TX|DBG_BUS, "(full region)");
1176 dev->tx_bytes = 0;
1177 } else {
1178 PRINTD (DBG_TX|DBG_BUS, "(start multi region)");
1179 dev->tx_bytes = tx_bytes - MAX_TRANSFER_COUNT;
1180 tx_bytes = MAX_TRANSFER_COUNT;
1181 }
1182 } else {
1183 // tx_regions == 0
1184 // that's all folks - end of frame
1185 struct sk_buff * skb = dev->tx_skb;
1186 dev->tx_iovec = NULL;
1187
1188 // VC layer stats
1189 atomic_inc(&ATM_SKB(skb)->vcc->stats->tx);
1190
1191 // free the skb
1192 hrz_kfree_skb (skb);
1193 }
1194 }
1195
1196 // note: writing TX_COUNT clears any interrupt condition
1197 if (tx_bytes) {
1198 if (pio_instead) {
1199 if (irq)
1200 wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0);
1201 wrs_regb (dev, DATA_PORT_OFF, dev->tx_addr, tx_bytes);
1202 if (append_desc)
1203 wr_regl (dev, TX_DESCRIPTOR_PORT_OFF, cpu_to_be32 (dev->tx_skb->len));
1204 } else {
1205 wr_regl (dev, MASTER_TX_ADDR_REG_OFF, virt_to_bus (dev->tx_addr));
1206 if (append_desc)
1207 wr_regl (dev, TX_DESCRIPTOR_REG_OFF, cpu_to_be32 (dev->tx_skb->len));
1208 wr_regl (dev, MASTER_TX_COUNT_REG_OFF,
1209 append_desc
1210 ? tx_bytes | MASTER_TX_AUTO_APPEND_DESC
1211 : tx_bytes);
1212 }
1213 dev->tx_addr += tx_bytes;
1214 } else {
1215 if (irq)
1216 wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0);
1217 YELLOW_LED_ON(dev);
1218 tx_release (dev);
1219 }
1220
1221#ifdef TAILRECURSIONWORKS
1222 // and we all bless optimised tail calls
1223 if (pio_instead)
1224 return tx_schedule (dev, 0);
1225 return;
1226#else
1227 // grrrrrrr!
1228 irq = 0;
1229 }
1230 return;
1231#endif
1232}
1233
1234/********** handle TX bus master complete events **********/
1235
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001236static void tx_bus_master_complete_handler (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001237 if (test_bit (tx_busy, &dev->flags)) {
1238 tx_schedule (dev, 1);
1239 } else {
1240 PRINTD (DBG_TX|DBG_ERR, "unexpected TX bus master completion");
1241 // clear interrupt condition on adapter
1242 wr_regl (dev, MASTER_TX_COUNT_REG_OFF, 0);
1243 }
1244 return;
1245}
1246
1247/********** move RX Q pointer to next item in circular buffer **********/
1248
1249// called only from IRQ sub-handler
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001250static u32 rx_queue_entry_next (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001251 u32 rx_queue_entry;
1252 spin_lock (&dev->mem_lock);
1253 rx_queue_entry = rd_mem (dev, &dev->rx_q_entry->entry);
1254 if (dev->rx_q_entry == dev->rx_q_wrap)
1255 dev->rx_q_entry = dev->rx_q_reset;
1256 else
1257 dev->rx_q_entry++;
1258 wr_regw (dev, RX_QUEUE_RD_PTR_OFF, dev->rx_q_entry - dev->rx_q_reset);
1259 spin_unlock (&dev->mem_lock);
1260 return rx_queue_entry;
1261}
1262
1263/********** handle RX disabled by device **********/
1264
1265static inline void rx_disabled_handler (hrz_dev * dev) {
1266 wr_regw (dev, RX_CONFIG_OFF, rd_regw (dev, RX_CONFIG_OFF) | RX_ENABLE);
1267 // count me please
1268 PRINTK (KERN_WARNING, "RX was disabled!");
1269}
1270
1271/********** handle RX data received by device **********/
1272
1273// called from IRQ handler
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001274static void rx_data_av_handler (hrz_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001275 u32 rx_queue_entry;
1276 u32 rx_queue_entry_flags;
1277 u16 rx_len;
1278 u16 rx_channel;
1279
1280 PRINTD (DBG_FLOW, "hrz_data_av_handler");
1281
1282 // try to grab rx lock (not possible during RX bus mastering)
1283 if (test_and_set_bit (rx_busy, &dev->flags)) {
1284 PRINTD (DBG_RX, "locked out of rx lock");
1285 return;
1286 }
1287 PRINTD (DBG_RX, "set rx_busy for dev %p", dev);
1288 // lock is cleared if we fail now, o/w after bus master completion
1289
1290 YELLOW_LED_OFF(dev);
1291
1292 rx_queue_entry = rx_queue_entry_next (dev);
1293
1294 rx_len = rx_q_entry_to_length (rx_queue_entry);
1295 rx_channel = rx_q_entry_to_rx_channel (rx_queue_entry);
1296
1297 WAIT_FLUSH_RX_COMPLETE (dev);
1298
1299 SELECT_RX_CHANNEL (dev, rx_channel);
1300
1301 PRINTD (DBG_RX, "rx_queue_entry is: %#x", rx_queue_entry);
1302 rx_queue_entry_flags = rx_queue_entry & (RX_CRC_32_OK|RX_COMPLETE_FRAME|SIMONS_DODGEY_MARKER);
1303
1304 if (!rx_len) {
1305 // (at least) bus-mastering breaks if we try to handle a
1306 // zero-length frame, besides AAL5 does not support them
1307 PRINTK (KERN_ERR, "zero-length frame!");
1308 rx_queue_entry_flags &= ~RX_COMPLETE_FRAME;
1309 }
1310
1311 if (rx_queue_entry_flags & SIMONS_DODGEY_MARKER) {
1312 PRINTD (DBG_RX|DBG_ERR, "Simon's marker detected!");
1313 }
1314 if (rx_queue_entry_flags == (RX_CRC_32_OK | RX_COMPLETE_FRAME)) {
1315 struct atm_vcc * atm_vcc;
1316
1317 PRINTD (DBG_RX, "got a frame on rx_channel %x len %u", rx_channel, rx_len);
1318
1319 atm_vcc = dev->rxer[rx_channel];
1320 // if no vcc is assigned to this channel, we should drop the frame
1321 // (is this what SIMONS etc. was trying to achieve?)
1322
1323 if (atm_vcc) {
1324
1325 if (atm_vcc->qos.rxtp.traffic_class != ATM_NONE) {
1326
1327 if (rx_len <= atm_vcc->qos.rxtp.max_sdu) {
1328
1329 struct sk_buff * skb = atm_alloc_charge (atm_vcc, rx_len, GFP_ATOMIC);
1330 if (skb) {
1331 // remember this so we can push it later
1332 dev->rx_skb = skb;
1333 // remember this so we can flush it later
1334 dev->rx_channel = rx_channel;
1335
1336 // prepare socket buffer
1337 skb_put (skb, rx_len);
1338 ATM_SKB(skb)->vcc = atm_vcc;
1339
1340 // simple transfer
1341 // dev->rx_regions = 0;
1342 // dev->rx_iovec = 0;
1343 dev->rx_bytes = rx_len;
1344 dev->rx_addr = skb->data;
1345 PRINTD (DBG_RX, "RX start simple transfer (addr %p, len %d)",
1346 skb->data, rx_len);
1347
1348 // do the business
1349 rx_schedule (dev, 0);
1350 return;
1351
1352 } else {
1353 PRINTD (DBG_SKB|DBG_WARN, "failed to get skb");
1354 }
1355
1356 } else {
1357 PRINTK (KERN_INFO, "frame received on TX-only VC %x", rx_channel);
1358 // do we count this?
1359 }
1360
1361 } else {
1362 PRINTK (KERN_WARNING, "dropped over-size frame");
1363 // do we count this?
1364 }
1365
1366 } else {
1367 PRINTD (DBG_WARN|DBG_VCC|DBG_RX, "no VCC for this frame (VC closed)");
1368 // do we count this?
1369 }
1370
1371 } else {
1372 // Wait update complete ? SPONG
1373 }
1374
1375 // RX was aborted
1376 YELLOW_LED_ON(dev);
1377
1378 FLUSH_RX_CHANNEL (dev,rx_channel);
1379 clear_bit (rx_busy, &dev->flags);
1380
1381 return;
1382}
1383
1384/********** interrupt handler **********/
1385
Jeff Garzik06efcad2007-10-19 03:10:11 -04001386static irqreturn_t interrupt_handler(int irq, void *dev_id)
1387{
1388 hrz_dev *dev = dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001389 u32 int_source;
1390 unsigned int irq_ok;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001391
1392 PRINTD (DBG_FLOW, "interrupt_handler: %p", dev_id);
1393
Linus Torvalds1da177e2005-04-16 15:20:36 -07001394 // definitely for us
1395 irq_ok = 0;
1396 while ((int_source = rd_regl (dev, INT_SOURCE_REG_OFF)
1397 & INTERESTING_INTERRUPTS)) {
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001398 // In the interests of fairness, the handlers below are
Linus Torvalds1da177e2005-04-16 15:20:36 -07001399 // called in sequence and without immediate return to the head of
1400 // the while loop. This is only of issue for slow hosts (or when
1401 // debugging messages are on). Really slow hosts may find a fast
1402 // sender keeps them permanently in the IRQ handler. :(
1403
1404 // (only an issue for slow hosts) RX completion goes before
1405 // rx_data_av as the former implies rx_busy and so the latter
1406 // would just abort. If it reschedules another transfer
1407 // (continuing the same frame) then it will not clear rx_busy.
1408
1409 // (only an issue for slow hosts) TX completion goes before RX
1410 // data available as it is a much shorter routine - there is the
1411 // chance that any further transfers it schedules will be complete
1412 // by the time of the return to the head of the while loop
1413
1414 if (int_source & RX_BUS_MASTER_COMPLETE) {
1415 ++irq_ok;
1416 PRINTD (DBG_IRQ|DBG_BUS|DBG_RX, "rx_bus_master_complete asserted");
1417 rx_bus_master_complete_handler (dev);
1418 }
1419 if (int_source & TX_BUS_MASTER_COMPLETE) {
1420 ++irq_ok;
1421 PRINTD (DBG_IRQ|DBG_BUS|DBG_TX, "tx_bus_master_complete asserted");
1422 tx_bus_master_complete_handler (dev);
1423 }
1424 if (int_source & RX_DATA_AV) {
1425 ++irq_ok;
1426 PRINTD (DBG_IRQ|DBG_RX, "rx_data_av asserted");
1427 rx_data_av_handler (dev);
1428 }
1429 }
1430 if (irq_ok) {
1431 PRINTD (DBG_IRQ, "work done: %u", irq_ok);
1432 } else {
1433 PRINTD (DBG_IRQ|DBG_WARN, "spurious interrupt source: %#x", int_source);
1434 }
1435
1436 PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler done: %p", dev_id);
1437 if (irq_ok)
1438 return IRQ_HANDLED;
1439 return IRQ_NONE;
1440}
1441
1442/********** housekeeping **********/
1443
1444static void do_housekeeping (unsigned long arg) {
1445 // just stats at the moment
1446 hrz_dev * dev = (hrz_dev *) arg;
1447
1448 // collect device-specific (not driver/atm-linux) stats here
1449 dev->tx_cell_count += rd_regw (dev, TX_CELL_COUNT_OFF);
1450 dev->rx_cell_count += rd_regw (dev, RX_CELL_COUNT_OFF);
1451 dev->hec_error_count += rd_regw (dev, HEC_ERROR_COUNT_OFF);
1452 dev->unassigned_cell_count += rd_regw (dev, UNASSIGNED_CELL_COUNT_OFF);
1453
1454 mod_timer (&dev->housekeeping, jiffies + HZ/10);
1455
1456 return;
1457}
1458
1459/********** find an idle channel for TX and set it up **********/
1460
1461// called with tx_busy set
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001462static short setup_idle_tx_channel (hrz_dev * dev, hrz_vcc * vcc) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001463 unsigned short idle_channels;
1464 short tx_channel = -1;
1465 unsigned int spin_count;
1466 PRINTD (DBG_FLOW|DBG_TX, "setup_idle_tx_channel %p", dev);
1467
1468 // better would be to fail immediately, the caller can then decide whether
1469 // to wait or drop (depending on whether this is UBR etc.)
1470 spin_count = 0;
1471 while (!(idle_channels = rd_regw (dev, TX_STATUS_OFF) & IDLE_CHANNELS_MASK)) {
1472 PRINTD (DBG_TX|DBG_WARN, "waiting for idle TX channel");
1473 // delay a bit here
1474 if (++spin_count > 100) {
1475 PRINTD (DBG_TX|DBG_ERR, "spun out waiting for idle TX channel");
1476 return -EBUSY;
1477 }
1478 }
1479
1480 // got an idle channel
1481 {
1482 // tx_idle ensures we look for idle channels in RR order
1483 int chan = dev->tx_idle;
1484
1485 int keep_going = 1;
1486 while (keep_going) {
1487 if (idle_channels & (1<<chan)) {
1488 tx_channel = chan;
1489 keep_going = 0;
1490 }
1491 ++chan;
1492 if (chan == TX_CHANS)
1493 chan = 0;
1494 }
1495
1496 dev->tx_idle = chan;
1497 }
1498
1499 // set up the channel we found
1500 {
1501 // Initialise the cell header in the transmit channel descriptor
1502 // a.k.a. prepare the channel and remember that we have done so.
1503
1504 tx_ch_desc * tx_desc = &memmap->tx_descs[tx_channel];
Dave Jonesb9255562005-11-10 12:55:52 -08001505 u32 rd_ptr;
1506 u32 wr_ptr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001507 u16 channel = vcc->channel;
1508
1509 unsigned long flags;
1510 spin_lock_irqsave (&dev->mem_lock, flags);
1511
1512 // Update the transmit channel record.
1513 dev->tx_channel_record[tx_channel] = channel;
1514
1515 // xBR channel
1516 update_tx_channel_config (dev, tx_channel, RATE_TYPE_ACCESS,
1517 vcc->tx_xbr_bits);
1518
1519 // Update the PCR counter preload value etc.
1520 update_tx_channel_config (dev, tx_channel, PCR_TIMER_ACCESS,
1521 vcc->tx_pcr_bits);
1522
1523#if 0
1524 if (vcc->tx_xbr_bits == VBR_RATE_TYPE) {
1525 // SCR timer
1526 update_tx_channel_config (dev, tx_channel, SCR_TIMER_ACCESS,
1527 vcc->tx_scr_bits);
1528
1529 // Bucket size...
1530 update_tx_channel_config (dev, tx_channel, BUCKET_CAPACITY_ACCESS,
1531 vcc->tx_bucket_bits);
1532
1533 // ... and fullness
1534 update_tx_channel_config (dev, tx_channel, BUCKET_FULLNESS_ACCESS,
1535 vcc->tx_bucket_bits);
1536 }
1537#endif
1538
1539 // Initialise the read and write buffer pointers
1540 rd_ptr = rd_mem (dev, &tx_desc->rd_buf_type) & BUFFER_PTR_MASK;
1541 wr_ptr = rd_mem (dev, &tx_desc->wr_buf_type) & BUFFER_PTR_MASK;
1542
1543 // idle TX channels should have identical pointers
1544 if (rd_ptr != wr_ptr) {
1545 PRINTD (DBG_TX|DBG_ERR, "TX buffer pointers are broken!");
1546 // spin_unlock... return -E...
1547 // I wonder if gcc would get rid of one of the pointer aliases
1548 }
1549 PRINTD (DBG_TX, "TX buffer pointers are: rd %x, wr %x.",
1550 rd_ptr, wr_ptr);
1551
1552 switch (vcc->aal) {
1553 case aal0:
1554 PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal0");
1555 rd_ptr |= CHANNEL_TYPE_RAW_CELLS;
1556 wr_ptr |= CHANNEL_TYPE_RAW_CELLS;
1557 break;
1558 case aal34:
1559 PRINTD (DBG_QOS|DBG_TX, "tx_channel: aal34");
1560 rd_ptr |= CHANNEL_TYPE_AAL3_4;
1561 wr_ptr |= CHANNEL_TYPE_AAL3_4;
1562 break;
1563 case aal5:
1564 rd_ptr |= CHANNEL_TYPE_AAL5;
1565 wr_ptr |= CHANNEL_TYPE_AAL5;
1566 // Initialise the CRC
1567 wr_mem (dev, &tx_desc->partial_crc, INITIAL_CRC);
1568 break;
1569 }
1570
1571 wr_mem (dev, &tx_desc->rd_buf_type, rd_ptr);
1572 wr_mem (dev, &tx_desc->wr_buf_type, wr_ptr);
1573
1574 // Write the Cell Header
1575 // Payload Type, CLP and GFC would go here if non-zero
1576 wr_mem (dev, &tx_desc->cell_header, channel);
1577
1578 spin_unlock_irqrestore (&dev->mem_lock, flags);
1579 }
1580
1581 return tx_channel;
1582}
1583
1584/********** send a frame **********/
1585
1586static int hrz_send (struct atm_vcc * atm_vcc, struct sk_buff * skb) {
1587 unsigned int spin_count;
1588 int free_buffers;
1589 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
1590 hrz_vcc * vcc = HRZ_VCC(atm_vcc);
1591 u16 channel = vcc->channel;
1592
1593 u32 buffers_required;
1594
1595 /* signed for error return */
1596 short tx_channel;
1597
1598 PRINTD (DBG_FLOW|DBG_TX, "hrz_send vc %x data %p len %u",
1599 channel, skb->data, skb->len);
1600
1601 dump_skb (">>>", channel, skb);
1602
1603 if (atm_vcc->qos.txtp.traffic_class == ATM_NONE) {
1604 PRINTK (KERN_ERR, "attempt to send on RX-only VC %x", channel);
1605 hrz_kfree_skb (skb);
1606 return -EIO;
1607 }
1608
1609 // don't understand this
1610 ATM_SKB(skb)->vcc = atm_vcc;
1611
1612 if (skb->len > atm_vcc->qos.txtp.max_sdu) {
1613 PRINTK (KERN_ERR, "sk_buff length greater than agreed max_sdu, dropping...");
1614 hrz_kfree_skb (skb);
1615 return -EIO;
1616 }
1617
1618 if (!channel) {
1619 PRINTD (DBG_ERR|DBG_TX, "attempt to transmit on zero (rx_)channel");
1620 hrz_kfree_skb (skb);
1621 return -EIO;
1622 }
1623
1624#if 0
1625 {
1626 // where would be a better place for this? housekeeping?
1627 u16 status;
1628 pci_read_config_word (dev->pci_dev, PCI_STATUS, &status);
1629 if (status & PCI_STATUS_REC_MASTER_ABORT) {
1630 PRINTD (DBG_BUS|DBG_ERR, "Clearing PCI Master Abort (and cleaning up)");
1631 status &= ~PCI_STATUS_REC_MASTER_ABORT;
1632 pci_write_config_word (dev->pci_dev, PCI_STATUS, status);
1633 if (test_bit (tx_busy, &dev->flags)) {
1634 hrz_kfree_skb (dev->tx_skb);
1635 tx_release (dev);
1636 }
1637 }
1638 }
1639#endif
1640
1641#ifdef DEBUG_HORIZON
1642 /* wey-hey! */
1643 if (channel == 1023) {
1644 unsigned int i;
1645 unsigned short d = 0;
1646 char * s = skb->data;
1647 if (*s++ == 'D') {
Andy Shevchenko66bb16d2010-09-20 20:40:24 +00001648 for (i = 0; i < 4; ++i)
1649 d = (d << 4) | hex_to_bin(*s++);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001650 PRINTK (KERN_INFO, "debug bitmap is now %hx", debug = d);
1651 }
1652 }
1653#endif
1654
1655 // wait until TX is free and grab lock
1656 if (tx_hold (dev)) {
1657 hrz_kfree_skb (skb);
1658 return -ERESTARTSYS;
1659 }
1660
1661 // Wait for enough space to be available in transmit buffer memory.
1662
1663 // should be number of cells needed + 2 (according to hardware docs)
1664 // = ((framelen+8)+47) / 48 + 2
1665 // = (framelen+7) / 48 + 3, hmm... faster to put addition inside XXX
1666 buffers_required = (skb->len+(ATM_AAL5_TRAILER-1)) / ATM_CELL_PAYLOAD + 3;
1667
1668 // replace with timer and sleep, add dev->tx_buffers_queue (max 1 entry)
1669 spin_count = 0;
1670 while ((free_buffers = rd_regw (dev, TX_FREE_BUFFER_COUNT_OFF)) < buffers_required) {
1671 PRINTD (DBG_TX, "waiting for free TX buffers, got %d of %d",
1672 free_buffers, buffers_required);
1673 // what is the appropriate delay? implement a timeout? (depending on line speed?)
1674 // mdelay (1);
1675 // what happens if we kill (current_pid, SIGKILL) ?
1676 schedule();
1677 if (++spin_count > 1000) {
1678 PRINTD (DBG_TX|DBG_ERR, "spun out waiting for tx buffers, got %d of %d",
1679 free_buffers, buffers_required);
1680 tx_release (dev);
1681 hrz_kfree_skb (skb);
1682 return -ERESTARTSYS;
1683 }
1684 }
1685
1686 // Select a channel to transmit the frame on.
1687 if (channel == dev->last_vc) {
1688 PRINTD (DBG_TX, "last vc hack: hit");
1689 tx_channel = dev->tx_last;
1690 } else {
1691 PRINTD (DBG_TX, "last vc hack: miss");
1692 // Are we currently transmitting this VC on one of the channels?
1693 for (tx_channel = 0; tx_channel < TX_CHANS; ++tx_channel)
1694 if (dev->tx_channel_record[tx_channel] == channel) {
1695 PRINTD (DBG_TX, "vc already on channel: hit");
1696 break;
1697 }
1698 if (tx_channel == TX_CHANS) {
1699 PRINTD (DBG_TX, "vc already on channel: miss");
1700 // Find and set up an idle channel.
1701 tx_channel = setup_idle_tx_channel (dev, vcc);
1702 if (tx_channel < 0) {
1703 PRINTD (DBG_TX|DBG_ERR, "failed to get channel");
1704 tx_release (dev);
1705 return tx_channel;
1706 }
1707 }
1708
1709 PRINTD (DBG_TX, "got channel");
1710 SELECT_TX_CHANNEL(dev, tx_channel);
1711
1712 dev->last_vc = channel;
1713 dev->tx_last = tx_channel;
1714 }
1715
1716 PRINTD (DBG_TX, "using channel %u", tx_channel);
1717
1718 YELLOW_LED_OFF(dev);
1719
1720 // TX start transfer
1721
1722 {
1723 unsigned int tx_len = skb->len;
1724 unsigned int tx_iovcnt = skb_shinfo(skb)->nr_frags;
1725 // remember this so we can free it later
1726 dev->tx_skb = skb;
1727
1728 if (tx_iovcnt) {
1729 // scatter gather transfer
1730 dev->tx_regions = tx_iovcnt;
1731 dev->tx_iovec = NULL; /* @@@ needs rewritten */
1732 dev->tx_bytes = 0;
1733 PRINTD (DBG_TX|DBG_BUS, "TX start scatter-gather transfer (iovec %p, len %d)",
1734 skb->data, tx_len);
1735 tx_release (dev);
1736 hrz_kfree_skb (skb);
1737 return -EIO;
1738 } else {
1739 // simple transfer
1740 dev->tx_regions = 0;
1741 dev->tx_iovec = NULL;
1742 dev->tx_bytes = tx_len;
1743 dev->tx_addr = skb->data;
1744 PRINTD (DBG_TX|DBG_BUS, "TX start simple transfer (addr %p, len %d)",
1745 skb->data, tx_len);
1746 }
1747
1748 // and do the business
1749 tx_schedule (dev, 0);
1750
1751 }
1752
1753 return 0;
1754}
1755
1756/********** reset a card **********/
1757
1758static void hrz_reset (const hrz_dev * dev) {
1759 u32 control_0_reg = rd_regl (dev, CONTROL_0_REG);
1760
1761 // why not set RESET_HORIZON to one and wait for the card to
1762 // reassert that bit as zero? Like so:
1763 control_0_reg = control_0_reg & RESET_HORIZON;
1764 wr_regl (dev, CONTROL_0_REG, control_0_reg);
1765 while (control_0_reg & RESET_HORIZON)
1766 control_0_reg = rd_regl (dev, CONTROL_0_REG);
1767
1768 // old reset code retained:
1769 wr_regl (dev, CONTROL_0_REG, control_0_reg |
1770 RESET_ATM | RESET_RX | RESET_TX | RESET_HOST);
1771 // just guessing here
1772 udelay (1000);
1773
1774 wr_regl (dev, CONTROL_0_REG, control_0_reg);
1775}
1776
1777/********** read the burnt in address **********/
1778
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001779static void WRITE_IT_WAIT (const hrz_dev *dev, u32 ctrl)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001780{
1781 wr_regl (dev, CONTROL_0_REG, ctrl);
1782 udelay (5);
1783}
1784
Denys Vlasenko2cf83af2008-04-13 21:54:34 -07001785static void CLOCK_IT (const hrz_dev *dev, u32 ctrl)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001786{
1787 // DI must be valid around rising SK edge
1788 WRITE_IT_WAIT(dev, ctrl & ~SEEPROM_SK);
1789 WRITE_IT_WAIT(dev, ctrl | SEEPROM_SK);
1790}
1791
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001792static u16 read_bia(const hrz_dev *dev, u16 addr)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001793{
1794 u32 ctrl = rd_regl (dev, CONTROL_0_REG);
1795
1796 const unsigned int addr_bits = 6;
1797 const unsigned int data_bits = 16;
1798
1799 unsigned int i;
1800
1801 u16 res;
1802
1803 ctrl &= ~(SEEPROM_CS | SEEPROM_SK | SEEPROM_DI);
1804 WRITE_IT_WAIT(dev, ctrl);
1805
1806 // wake Serial EEPROM and send 110 (READ) command
1807 ctrl |= (SEEPROM_CS | SEEPROM_DI);
1808 CLOCK_IT(dev, ctrl);
1809
1810 ctrl |= SEEPROM_DI;
1811 CLOCK_IT(dev, ctrl);
1812
1813 ctrl &= ~SEEPROM_DI;
1814 CLOCK_IT(dev, ctrl);
1815
1816 for (i=0; i<addr_bits; i++) {
1817 if (addr & (1 << (addr_bits-1)))
1818 ctrl |= SEEPROM_DI;
1819 else
1820 ctrl &= ~SEEPROM_DI;
1821
1822 CLOCK_IT(dev, ctrl);
1823
1824 addr = addr << 1;
1825 }
1826
1827 // we could check that we have DO = 0 here
1828 ctrl &= ~SEEPROM_DI;
1829
1830 res = 0;
1831 for (i=0;i<data_bits;i++) {
1832 res = res >> 1;
1833
1834 CLOCK_IT(dev, ctrl);
1835
1836 if (rd_regl (dev, CONTROL_0_REG) & SEEPROM_DO)
1837 res |= (1 << (data_bits-1));
1838 }
1839
1840 ctrl &= ~(SEEPROM_SK | SEEPROM_CS);
1841 WRITE_IT_WAIT(dev, ctrl);
1842
1843 return res;
1844}
1845
1846/********** initialise a card **********/
1847
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001848static int hrz_init(hrz_dev *dev)
1849{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001850 int onefivefive;
1851
1852 u16 chan;
1853
1854 int buff_count;
1855
1856 HDW * mem;
1857
1858 cell_buf * tx_desc;
1859 cell_buf * rx_desc;
1860
1861 u32 ctrl;
1862
1863 ctrl = rd_regl (dev, CONTROL_0_REG);
1864 PRINTD (DBG_INFO, "ctrl0reg is %#x", ctrl);
1865 onefivefive = ctrl & ATM_LAYER_STATUS;
1866
1867 if (onefivefive)
1868 printk (DEV_LABEL ": Horizon Ultra (at 155.52 MBps)");
1869 else
1870 printk (DEV_LABEL ": Horizon (at 25 MBps)");
1871
1872 printk (":");
1873 // Reset the card to get everything in a known state
1874
1875 printk (" reset");
1876 hrz_reset (dev);
1877
1878 // Clear all the buffer memory
1879
1880 printk (" clearing memory");
1881
1882 for (mem = (HDW *) memmap; mem < (HDW *) (memmap + 1); ++mem)
1883 wr_mem (dev, mem, 0);
1884
1885 printk (" tx channels");
1886
1887 // All transmit eight channels are set up as AAL5 ABR channels with
1888 // a 16us cell spacing. Why?
1889
1890 // Channel 0 gets the free buffer at 100h, channel 1 gets the free
1891 // buffer at 110h etc.
1892
1893 for (chan = 0; chan < TX_CHANS; ++chan) {
1894 tx_ch_desc * tx_desc = &memmap->tx_descs[chan];
1895 cell_buf * buf = &memmap->inittxbufs[chan];
1896
1897 // initialise the read and write buffer pointers
1898 wr_mem (dev, &tx_desc->rd_buf_type, BUF_PTR(buf));
1899 wr_mem (dev, &tx_desc->wr_buf_type, BUF_PTR(buf));
1900
1901 // set the status of the initial buffers to empty
1902 wr_mem (dev, &buf->next, BUFF_STATUS_EMPTY);
1903 }
1904
1905 // Use space bufn3 at the moment for tx buffers
1906
1907 printk (" tx buffers");
1908
1909 tx_desc = memmap->bufn3;
1910
1911 wr_mem (dev, &memmap->txfreebufstart.next, BUF_PTR(tx_desc) | BUFF_STATUS_EMPTY);
1912
1913 for (buff_count = 0; buff_count < BUFN3_SIZE-1; buff_count++) {
1914 wr_mem (dev, &tx_desc->next, BUF_PTR(tx_desc+1) | BUFF_STATUS_EMPTY);
1915 tx_desc++;
1916 }
1917
1918 wr_mem (dev, &tx_desc->next, BUF_PTR(&memmap->txfreebufend) | BUFF_STATUS_EMPTY);
1919
1920 // Initialise the transmit free buffer count
1921 wr_regw (dev, TX_FREE_BUFFER_COUNT_OFF, BUFN3_SIZE);
1922
1923 printk (" rx channels");
1924
1925 // Initialise all of the receive channels to be AAL5 disabled with
1926 // an interrupt threshold of 0
1927
1928 for (chan = 0; chan < RX_CHANS; ++chan) {
1929 rx_ch_desc * rx_desc = &memmap->rx_descs[chan];
1930
1931 wr_mem (dev, &rx_desc->wr_buf_type, CHANNEL_TYPE_AAL5 | RX_CHANNEL_DISABLED);
1932 }
1933
1934 printk (" rx buffers");
1935
1936 // Use space bufn4 at the moment for rx buffers
1937
1938 rx_desc = memmap->bufn4;
1939
1940 wr_mem (dev, &memmap->rxfreebufstart.next, BUF_PTR(rx_desc) | BUFF_STATUS_EMPTY);
1941
1942 for (buff_count = 0; buff_count < BUFN4_SIZE-1; buff_count++) {
1943 wr_mem (dev, &rx_desc->next, BUF_PTR(rx_desc+1) | BUFF_STATUS_EMPTY);
1944
1945 rx_desc++;
1946 }
1947
1948 wr_mem (dev, &rx_desc->next, BUF_PTR(&memmap->rxfreebufend) | BUFF_STATUS_EMPTY);
1949
1950 // Initialise the receive free buffer count
1951 wr_regw (dev, RX_FREE_BUFFER_COUNT_OFF, BUFN4_SIZE);
1952
1953 // Initialize Horizons registers
1954
1955 // TX config
1956 wr_regw (dev, TX_CONFIG_OFF,
1957 ABR_ROUND_ROBIN | TX_NORMAL_OPERATION | DRVR_DRVRBAR_ENABLE);
1958
1959 // RX config. Use 10-x VC bits, x VP bits, non user cells in channel 0.
1960 wr_regw (dev, RX_CONFIG_OFF,
1961 DISCARD_UNUSED_VPI_VCI_BITS_SET | NON_USER_CELLS_IN_ONE_CHANNEL | vpi_bits);
1962
1963 // RX line config
1964 wr_regw (dev, RX_LINE_CONFIG_OFF,
1965 LOCK_DETECT_ENABLE | FREQUENCY_DETECT_ENABLE | GXTALOUT_SELECT_DIV4);
1966
1967 // Set the max AAL5 cell count to be just enough to contain the
1968 // largest AAL5 frame that the user wants to receive
1969 wr_regw (dev, MAX_AAL5_CELL_COUNT_OFF,
Julia Lawall6a193092008-09-22 19:22:58 -07001970 DIV_ROUND_UP(max_rx_size + ATM_AAL5_TRAILER, ATM_CELL_PAYLOAD));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001971
1972 // Enable receive
1973 wr_regw (dev, RX_CONFIG_OFF, rd_regw (dev, RX_CONFIG_OFF) | RX_ENABLE);
1974
1975 printk (" control");
1976
1977 // Drive the OE of the LEDs then turn the green LED on
1978 ctrl |= GREEN_LED_OE | YELLOW_LED_OE | GREEN_LED | YELLOW_LED;
1979 wr_regl (dev, CONTROL_0_REG, ctrl);
1980
1981 // Test for a 155-capable card
1982
1983 if (onefivefive) {
1984 // Select 155 mode... make this a choice (or: how do we detect
1985 // external line speed and switch?)
1986 ctrl |= ATM_LAYER_SELECT;
1987 wr_regl (dev, CONTROL_0_REG, ctrl);
1988
1989 // test SUNI-lite vs SAMBA
1990
1991 // Register 0x00 in the SUNI will have some of bits 3-7 set, and
1992 // they will always be zero for the SAMBA. Ha! Bloody hardware
1993 // engineers. It'll never work.
1994
1995 if (rd_framer (dev, 0) & 0x00f0) {
1996 // SUNI
1997 printk (" SUNI");
1998
1999 // Reset, just in case
2000 wr_framer (dev, 0x00, 0x0080);
2001 wr_framer (dev, 0x00, 0x0000);
2002
2003 // Configure transmit FIFO
2004 wr_framer (dev, 0x63, rd_framer (dev, 0x63) | 0x0002);
2005
2006 // Set line timed mode
2007 wr_framer (dev, 0x05, rd_framer (dev, 0x05) | 0x0001);
2008 } else {
2009 // SAMBA
2010 printk (" SAMBA");
2011
2012 // Reset, just in case
2013 wr_framer (dev, 0, rd_framer (dev, 0) | 0x0001);
2014 wr_framer (dev, 0, rd_framer (dev, 0) &~ 0x0001);
2015
2016 // Turn off diagnostic loopback and enable line-timed mode
2017 wr_framer (dev, 0, 0x0002);
2018
2019 // Turn on transmit outputs
2020 wr_framer (dev, 2, 0x0B80);
2021 }
2022 } else {
2023 // Select 25 mode
2024 ctrl &= ~ATM_LAYER_SELECT;
2025
2026 // Madge B154 setup
2027 // none required?
2028 }
2029
2030 printk (" LEDs");
2031
2032 GREEN_LED_ON(dev);
2033 YELLOW_LED_ON(dev);
2034
2035 printk (" ESI=");
2036
2037 {
2038 u16 b = 0;
2039 int i;
2040 u8 * esi = dev->atm_dev->esi;
2041
2042 // in the card I have, EEPROM
2043 // addresses 0, 1, 2 contain 0
2044 // addresess 5, 6 etc. contain ffff
2045 // NB: Madge prefix is 00 00 f6 (which is 00 00 6f in Ethernet bit order)
2046 // the read_bia routine gets the BIA in Ethernet bit order
2047
2048 for (i=0; i < ESI_LEN; ++i) {
2049 if (i % 2 == 0)
2050 b = read_bia (dev, i/2 + 2);
2051 else
2052 b = b >> 8;
2053 esi[i] = b & 0xFF;
2054 printk ("%02x", esi[i]);
2055 }
2056 }
2057
2058 // Enable RX_Q and ?X_COMPLETE interrupts only
2059 wr_regl (dev, INT_ENABLE_REG_OFF, INTERESTING_INTERRUPTS);
2060 printk (" IRQ on");
2061
2062 printk (".\n");
2063
2064 return onefivefive;
2065}
2066
2067/********** check max_sdu **********/
2068
2069static int check_max_sdu (hrz_aal aal, struct atm_trafprm * tp, unsigned int max_frame_size) {
2070 PRINTD (DBG_FLOW|DBG_QOS, "check_max_sdu");
2071
2072 switch (aal) {
2073 case aal0:
2074 if (!(tp->max_sdu)) {
2075 PRINTD (DBG_QOS, "defaulting max_sdu");
2076 tp->max_sdu = ATM_AAL0_SDU;
2077 } else if (tp->max_sdu != ATM_AAL0_SDU) {
2078 PRINTD (DBG_QOS|DBG_ERR, "rejecting max_sdu");
2079 return -EINVAL;
2080 }
2081 break;
2082 case aal34:
2083 if (tp->max_sdu == 0 || tp->max_sdu > ATM_MAX_AAL34_PDU) {
2084 PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");
2085 tp->max_sdu = ATM_MAX_AAL34_PDU;
2086 }
2087 break;
2088 case aal5:
2089 if (tp->max_sdu == 0 || tp->max_sdu > max_frame_size) {
2090 PRINTD (DBG_QOS, "%sing max_sdu", tp->max_sdu ? "capp" : "default");
2091 tp->max_sdu = max_frame_size;
2092 }
2093 break;
2094 }
2095 return 0;
2096}
2097
2098/********** check pcr **********/
2099
2100// something like this should be part of ATM Linux
2101static int atm_pcr_check (struct atm_trafprm * tp, unsigned int pcr) {
2102 // we are assuming non-UBR, and non-special values of pcr
2103 if (tp->min_pcr == ATM_MAX_PCR)
2104 PRINTD (DBG_QOS, "luser gave min_pcr = ATM_MAX_PCR");
2105 else if (tp->min_pcr < 0)
2106 PRINTD (DBG_QOS, "luser gave negative min_pcr");
2107 else if (tp->min_pcr && tp->min_pcr > pcr)
2108 PRINTD (DBG_QOS, "pcr less than min_pcr");
2109 else
2110 // !! max_pcr = UNSPEC (0) is equivalent to max_pcr = MAX (-1)
2111 // easier to #define ATM_MAX_PCR 0 and have all rates unsigned?
2112 // [this would get rid of next two conditionals]
2113 if ((0) && tp->max_pcr == ATM_MAX_PCR)
2114 PRINTD (DBG_QOS, "luser gave max_pcr = ATM_MAX_PCR");
2115 else if ((tp->max_pcr != ATM_MAX_PCR) && tp->max_pcr < 0)
2116 PRINTD (DBG_QOS, "luser gave negative max_pcr");
2117 else if (tp->max_pcr && tp->max_pcr != ATM_MAX_PCR && tp->max_pcr < pcr)
2118 PRINTD (DBG_QOS, "pcr greater than max_pcr");
2119 else {
2120 // each limit unspecified or not violated
2121 PRINTD (DBG_QOS, "xBR(pcr) OK");
2122 return 0;
2123 }
2124 PRINTD (DBG_QOS, "pcr=%u, tp: min_pcr=%d, pcr=%d, max_pcr=%d",
2125 pcr, tp->min_pcr, tp->pcr, tp->max_pcr);
2126 return -EINVAL;
2127}
2128
2129/********** open VC **********/
2130
2131static int hrz_open (struct atm_vcc *atm_vcc)
2132{
2133 int error;
2134 u16 channel;
2135
2136 struct atm_qos * qos;
2137 struct atm_trafprm * txtp;
2138 struct atm_trafprm * rxtp;
2139
2140 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
2141 hrz_vcc vcc;
2142 hrz_vcc * vccp; // allocated late
2143 short vpi = atm_vcc->vpi;
2144 int vci = atm_vcc->vci;
2145 PRINTD (DBG_FLOW|DBG_VCC, "hrz_open %x %x", vpi, vci);
2146
2147#ifdef ATM_VPI_UNSPEC
2148 // UNSPEC is deprecated, remove this code eventually
2149 if (vpi == ATM_VPI_UNSPEC || vci == ATM_VCI_UNSPEC) {
2150 PRINTK (KERN_WARNING, "rejecting open with unspecified VPI/VCI (deprecated)");
2151 return -EINVAL;
2152 }
2153#endif
2154
2155 error = vpivci_to_channel (&channel, vpi, vci);
2156 if (error) {
2157 PRINTD (DBG_WARN|DBG_VCC, "VPI/VCI out of range: %hd/%d", vpi, vci);
2158 return error;
2159 }
2160
2161 vcc.channel = channel;
2162 // max speed for the moment
2163 vcc.tx_rate = 0x0;
2164
2165 qos = &atm_vcc->qos;
2166
2167 // check AAL and remember it
2168 switch (qos->aal) {
2169 case ATM_AAL0:
2170 // we would if it were 48 bytes and not 52!
2171 PRINTD (DBG_QOS|DBG_VCC, "AAL0");
2172 vcc.aal = aal0;
2173 break;
2174 case ATM_AAL34:
2175 // we would if I knew how do the SAR!
2176 PRINTD (DBG_QOS|DBG_VCC, "AAL3/4");
2177 vcc.aal = aal34;
2178 break;
2179 case ATM_AAL5:
2180 PRINTD (DBG_QOS|DBG_VCC, "AAL5");
2181 vcc.aal = aal5;
2182 break;
2183 default:
2184 PRINTD (DBG_QOS|DBG_VCC, "Bad AAL!");
2185 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002186 }
2187
2188 // TX traffic parameters
2189
2190 // there are two, interrelated problems here: 1. the reservation of
2191 // PCR is not a binary choice, we are given bounds and/or a
2192 // desirable value; 2. the device is only capable of certain values,
2193 // most of which are not integers. It is almost certainly acceptable
2194 // to be off by a maximum of 1 to 10 cps.
2195
2196 // Pragmatic choice: always store an integral PCR as that which has
2197 // been allocated, even if we allocate a little (or a lot) less,
2198 // after rounding. The actual allocation depends on what we can
2199 // manage with our rate selection algorithm. The rate selection
2200 // algorithm is given an integral PCR and a tolerance and told
2201 // whether it should round the value up or down if the tolerance is
2202 // exceeded; it returns: a) the actual rate selected (rounded up to
2203 // the nearest integer), b) a bit pattern to feed to the timer
2204 // register, and c) a failure value if no applicable rate exists.
2205
2206 // Part of the job is done by atm_pcr_goal which gives us a PCR
2207 // specification which says: EITHER grab the maximum available PCR
2208 // (and perhaps a lower bound which we musn't pass), OR grab this
2209 // amount, rounding down if you have to (and perhaps a lower bound
2210 // which we musn't pass) OR grab this amount, rounding up if you
2211 // have to (and perhaps an upper bound which we musn't pass). If any
2212 // bounds ARE passed we fail. Note that rounding is only rounding to
2213 // match device limitations, we do not round down to satisfy
2214 // bandwidth availability even if this would not violate any given
2215 // lower bound.
2216
2217 // Note: telephony = 64kb/s = 48 byte cell payload @ 500/3 cells/s
2218 // (say) so this is not even a binary fixpoint cell rate (but this
2219 // device can do it). To avoid this sort of hassle we use a
2220 // tolerance parameter (currently fixed at 10 cps).
2221
2222 PRINTD (DBG_QOS, "TX:");
2223
2224 txtp = &qos->txtp;
2225
2226 // set up defaults for no traffic
2227 vcc.tx_rate = 0;
2228 // who knows what would actually happen if you try and send on this?
2229 vcc.tx_xbr_bits = IDLE_RATE_TYPE;
2230 vcc.tx_pcr_bits = CLOCK_DISABLE;
2231#if 0
2232 vcc.tx_scr_bits = CLOCK_DISABLE;
2233 vcc.tx_bucket_bits = 0;
2234#endif
2235
2236 if (txtp->traffic_class != ATM_NONE) {
2237 error = check_max_sdu (vcc.aal, txtp, max_tx_size);
2238 if (error) {
2239 PRINTD (DBG_QOS, "TX max_sdu check failed");
2240 return error;
2241 }
2242
2243 switch (txtp->traffic_class) {
2244 case ATM_UBR: {
2245 // we take "the PCR" as a rate-cap
2246 // not reserved
2247 vcc.tx_rate = 0;
2248 make_rate (dev, 1<<30, round_nearest, &vcc.tx_pcr_bits, NULL);
2249 vcc.tx_xbr_bits = ABR_RATE_TYPE;
2250 break;
2251 }
2252#if 0
2253 case ATM_ABR: {
2254 // reserve min, allow up to max
2255 vcc.tx_rate = 0; // ?
2256 make_rate (dev, 1<<30, round_nearest, &vcc.tx_pcr_bits, 0);
2257 vcc.tx_xbr_bits = ABR_RATE_TYPE;
2258 break;
2259 }
2260#endif
2261 case ATM_CBR: {
2262 int pcr = atm_pcr_goal (txtp);
2263 rounding r;
2264 if (!pcr) {
2265 // down vs. up, remaining bandwidth vs. unlimited bandwidth!!
2266 // should really have: once someone gets unlimited bandwidth
2267 // that no more non-UBR channels can be opened until the
2268 // unlimited one closes?? For the moment, round_down means
2269 // greedy people actually get something and not nothing
2270 r = round_down;
2271 // slight race (no locking) here so we may get -EAGAIN
2272 // later; the greedy bastards would deserve it :)
2273 PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");
2274 pcr = dev->tx_avail;
2275 } else if (pcr < 0) {
2276 r = round_down;
2277 pcr = -pcr;
2278 } else {
2279 r = round_up;
2280 }
2281 error = make_rate_with_tolerance (dev, pcr, r, 10,
2282 &vcc.tx_pcr_bits, &vcc.tx_rate);
2283 if (error) {
2284 PRINTD (DBG_QOS, "could not make rate from TX PCR");
2285 return error;
2286 }
2287 // not really clear what further checking is needed
2288 error = atm_pcr_check (txtp, vcc.tx_rate);
2289 if (error) {
2290 PRINTD (DBG_QOS, "TX PCR failed consistency check");
2291 return error;
2292 }
2293 vcc.tx_xbr_bits = CBR_RATE_TYPE;
2294 break;
2295 }
2296#if 0
2297 case ATM_VBR: {
2298 int pcr = atm_pcr_goal (txtp);
2299 // int scr = atm_scr_goal (txtp);
2300 int scr = pcr/2; // just for fun
2301 unsigned int mbs = 60; // just for fun
2302 rounding pr;
2303 rounding sr;
2304 unsigned int bucket;
2305 if (!pcr) {
2306 pr = round_nearest;
2307 pcr = 1<<30;
2308 } else if (pcr < 0) {
2309 pr = round_down;
2310 pcr = -pcr;
2311 } else {
2312 pr = round_up;
2313 }
2314 error = make_rate_with_tolerance (dev, pcr, pr, 10,
2315 &vcc.tx_pcr_bits, 0);
2316 if (!scr) {
2317 // see comments for PCR with CBR above
2318 sr = round_down;
2319 // slight race (no locking) here so we may get -EAGAIN
2320 // later; the greedy bastards would deserve it :)
2321 PRINTD (DBG_QOS, "snatching all remaining TX bandwidth");
2322 scr = dev->tx_avail;
2323 } else if (scr < 0) {
2324 sr = round_down;
2325 scr = -scr;
2326 } else {
2327 sr = round_up;
2328 }
2329 error = make_rate_with_tolerance (dev, scr, sr, 10,
2330 &vcc.tx_scr_bits, &vcc.tx_rate);
2331 if (error) {
2332 PRINTD (DBG_QOS, "could not make rate from TX SCR");
2333 return error;
2334 }
2335 // not really clear what further checking is needed
2336 // error = atm_scr_check (txtp, vcc.tx_rate);
2337 if (error) {
2338 PRINTD (DBG_QOS, "TX SCR failed consistency check");
2339 return error;
2340 }
2341 // bucket calculations (from a piece of paper...) cell bucket
2342 // capacity must be largest integer smaller than m(p-s)/p + 1
2343 // where m = max burst size, p = pcr, s = scr
2344 bucket = mbs*(pcr-scr)/pcr;
2345 if (bucket*pcr != mbs*(pcr-scr))
2346 bucket += 1;
2347 if (bucket > BUCKET_MAX_SIZE) {
2348 PRINTD (DBG_QOS, "shrinking bucket from %u to %u",
2349 bucket, BUCKET_MAX_SIZE);
2350 bucket = BUCKET_MAX_SIZE;
2351 }
2352 vcc.tx_xbr_bits = VBR_RATE_TYPE;
2353 vcc.tx_bucket_bits = bucket;
2354 break;
2355 }
2356#endif
2357 default: {
2358 PRINTD (DBG_QOS, "unsupported TX traffic class");
2359 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002360 }
2361 }
2362 }
2363
2364 // RX traffic parameters
2365
2366 PRINTD (DBG_QOS, "RX:");
2367
2368 rxtp = &qos->rxtp;
2369
2370 // set up defaults for no traffic
2371 vcc.rx_rate = 0;
2372
2373 if (rxtp->traffic_class != ATM_NONE) {
2374 error = check_max_sdu (vcc.aal, rxtp, max_rx_size);
2375 if (error) {
2376 PRINTD (DBG_QOS, "RX max_sdu check failed");
2377 return error;
2378 }
2379 switch (rxtp->traffic_class) {
2380 case ATM_UBR: {
2381 // not reserved
2382 break;
2383 }
2384#if 0
2385 case ATM_ABR: {
2386 // reserve min
2387 vcc.rx_rate = 0; // ?
2388 break;
2389 }
2390#endif
2391 case ATM_CBR: {
2392 int pcr = atm_pcr_goal (rxtp);
2393 if (!pcr) {
2394 // slight race (no locking) here so we may get -EAGAIN
2395 // later; the greedy bastards would deserve it :)
2396 PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");
2397 pcr = dev->rx_avail;
2398 } else if (pcr < 0) {
2399 pcr = -pcr;
2400 }
2401 vcc.rx_rate = pcr;
2402 // not really clear what further checking is needed
2403 error = atm_pcr_check (rxtp, vcc.rx_rate);
2404 if (error) {
2405 PRINTD (DBG_QOS, "RX PCR failed consistency check");
2406 return error;
2407 }
2408 break;
2409 }
2410#if 0
2411 case ATM_VBR: {
2412 // int scr = atm_scr_goal (rxtp);
2413 int scr = 1<<16; // just for fun
2414 if (!scr) {
2415 // slight race (no locking) here so we may get -EAGAIN
2416 // later; the greedy bastards would deserve it :)
2417 PRINTD (DBG_QOS, "snatching all remaining RX bandwidth");
2418 scr = dev->rx_avail;
2419 } else if (scr < 0) {
2420 scr = -scr;
2421 }
2422 vcc.rx_rate = scr;
2423 // not really clear what further checking is needed
2424 // error = atm_scr_check (rxtp, vcc.rx_rate);
2425 if (error) {
2426 PRINTD (DBG_QOS, "RX SCR failed consistency check");
2427 return error;
2428 }
2429 break;
2430 }
2431#endif
2432 default: {
2433 PRINTD (DBG_QOS, "unsupported RX traffic class");
2434 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002435 }
2436 }
2437 }
2438
2439
2440 // late abort useful for diagnostics
2441 if (vcc.aal != aal5) {
2442 PRINTD (DBG_QOS, "AAL not supported");
2443 return -EINVAL;
2444 }
2445
2446 // get space for our vcc stuff and copy parameters into it
2447 vccp = kmalloc (sizeof(hrz_vcc), GFP_KERNEL);
2448 if (!vccp) {
2449 PRINTK (KERN_ERR, "out of memory!");
2450 return -ENOMEM;
2451 }
2452 *vccp = vcc;
2453
2454 // clear error and grab cell rate resource lock
2455 error = 0;
2456 spin_lock (&dev->rate_lock);
2457
2458 if (vcc.tx_rate > dev->tx_avail) {
2459 PRINTD (DBG_QOS, "not enough TX PCR left");
2460 error = -EAGAIN;
2461 }
2462
2463 if (vcc.rx_rate > dev->rx_avail) {
2464 PRINTD (DBG_QOS, "not enough RX PCR left");
2465 error = -EAGAIN;
2466 }
2467
2468 if (!error) {
2469 // really consume cell rates
2470 dev->tx_avail -= vcc.tx_rate;
2471 dev->rx_avail -= vcc.rx_rate;
2472 PRINTD (DBG_QOS|DBG_VCC, "reserving %u TX PCR and %u RX PCR",
2473 vcc.tx_rate, vcc.rx_rate);
2474 }
2475
2476 // release lock and exit on error
2477 spin_unlock (&dev->rate_lock);
2478 if (error) {
2479 PRINTD (DBG_QOS|DBG_VCC, "insufficient cell rate resources");
2480 kfree (vccp);
2481 return error;
2482 }
2483
2484 // this is "immediately before allocating the connection identifier
2485 // in hardware" - so long as the next call does not fail :)
2486 set_bit(ATM_VF_ADDR,&atm_vcc->flags);
2487
2488 // any errors here are very serious and should never occur
2489
2490 if (rxtp->traffic_class != ATM_NONE) {
2491 if (dev->rxer[channel]) {
2492 PRINTD (DBG_ERR|DBG_VCC, "VC already open for RX");
2493 error = -EBUSY;
2494 }
2495 if (!error)
2496 error = hrz_open_rx (dev, channel);
2497 if (error) {
2498 kfree (vccp);
2499 return error;
2500 }
2501 // this link allows RX frames through
2502 dev->rxer[channel] = atm_vcc;
2503 }
2504
2505 // success, set elements of atm_vcc
2506 atm_vcc->dev_data = (void *) vccp;
2507
2508 // indicate readiness
2509 set_bit(ATM_VF_READY,&atm_vcc->flags);
2510
2511 return 0;
2512}
2513
2514/********** close VC **********/
2515
2516static void hrz_close (struct atm_vcc * atm_vcc) {
2517 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
2518 hrz_vcc * vcc = HRZ_VCC(atm_vcc);
2519 u16 channel = vcc->channel;
2520 PRINTD (DBG_VCC|DBG_FLOW, "hrz_close");
2521
2522 // indicate unreadiness
2523 clear_bit(ATM_VF_READY,&atm_vcc->flags);
2524
2525 if (atm_vcc->qos.txtp.traffic_class != ATM_NONE) {
2526 unsigned int i;
2527
2528 // let any TX on this channel that has started complete
2529 // no restart, just keep trying
2530 while (tx_hold (dev))
2531 ;
2532 // remove record of any tx_channel having been setup for this channel
2533 for (i = 0; i < TX_CHANS; ++i)
2534 if (dev->tx_channel_record[i] == channel) {
2535 dev->tx_channel_record[i] = -1;
2536 break;
2537 }
2538 if (dev->last_vc == channel)
2539 dev->tx_last = -1;
2540 tx_release (dev);
2541 }
2542
2543 if (atm_vcc->qos.rxtp.traffic_class != ATM_NONE) {
2544 // disable RXing - it tries quite hard
2545 hrz_close_rx (dev, channel);
2546 // forget the vcc - no more skbs will be pushed
2547 if (atm_vcc != dev->rxer[channel])
2548 PRINTK (KERN_ERR, "%s atm_vcc=%p rxer[channel]=%p",
2549 "arghhh! we're going to die!",
2550 atm_vcc, dev->rxer[channel]);
2551 dev->rxer[channel] = NULL;
2552 }
2553
2554 // atomically release our rate reservation
2555 spin_lock (&dev->rate_lock);
2556 PRINTD (DBG_QOS|DBG_VCC, "releasing %u TX PCR and %u RX PCR",
2557 vcc->tx_rate, vcc->rx_rate);
2558 dev->tx_avail += vcc->tx_rate;
2559 dev->rx_avail += vcc->rx_rate;
2560 spin_unlock (&dev->rate_lock);
2561
2562 // free our structure
2563 kfree (vcc);
2564 // say the VPI/VCI is free again
2565 clear_bit(ATM_VF_ADDR,&atm_vcc->flags);
2566}
2567
2568#if 0
2569static int hrz_getsockopt (struct atm_vcc * atm_vcc, int level, int optname,
2570 void *optval, int optlen) {
2571 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
2572 PRINTD (DBG_FLOW|DBG_VCC, "hrz_getsockopt");
2573 switch (level) {
2574 case SOL_SOCKET:
2575 switch (optname) {
2576// case SO_BCTXOPT:
2577// break;
2578// case SO_BCRXOPT:
2579// break;
2580 default:
2581 return -ENOPROTOOPT;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002582 };
2583 break;
2584 }
2585 return -EINVAL;
2586}
2587
2588static int hrz_setsockopt (struct atm_vcc * atm_vcc, int level, int optname,
David S. Millerb7058842009-09-30 16:12:20 -07002589 void *optval, unsigned int optlen) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002590 hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
2591 PRINTD (DBG_FLOW|DBG_VCC, "hrz_setsockopt");
2592 switch (level) {
2593 case SOL_SOCKET:
2594 switch (optname) {
2595// case SO_BCTXOPT:
2596// break;
2597// case SO_BCRXOPT:
2598// break;
2599 default:
2600 return -ENOPROTOOPT;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002601 };
2602 break;
2603 }
2604 return -EINVAL;
2605}
2606#endif
2607
2608#if 0
2609static int hrz_ioctl (struct atm_dev * atm_dev, unsigned int cmd, void *arg) {
2610 hrz_dev * dev = HRZ_DEV(atm_dev);
2611 PRINTD (DBG_FLOW, "hrz_ioctl");
2612 return -1;
2613}
2614
2615unsigned char hrz_phy_get (struct atm_dev * atm_dev, unsigned long addr) {
2616 hrz_dev * dev = HRZ_DEV(atm_dev);
2617 PRINTD (DBG_FLOW, "hrz_phy_get");
2618 return 0;
2619}
2620
2621static void hrz_phy_put (struct atm_dev * atm_dev, unsigned char value,
2622 unsigned long addr) {
2623 hrz_dev * dev = HRZ_DEV(atm_dev);
2624 PRINTD (DBG_FLOW, "hrz_phy_put");
2625}
2626
2627static int hrz_change_qos (struct atm_vcc * atm_vcc, struct atm_qos *qos, int flgs) {
2628 hrz_dev * dev = HRZ_DEV(vcc->dev);
2629 PRINTD (DBG_FLOW, "hrz_change_qos");
2630 return -1;
2631}
2632#endif
2633
2634/********** proc file contents **********/
2635
2636static int hrz_proc_read (struct atm_dev * atm_dev, loff_t * pos, char * page) {
2637 hrz_dev * dev = HRZ_DEV(atm_dev);
2638 int left = *pos;
2639 PRINTD (DBG_FLOW, "hrz_proc_read");
2640
2641 /* more diagnostics here? */
2642
2643#if 0
2644 if (!left--) {
2645 unsigned int count = sprintf (page, "vbr buckets:");
2646 unsigned int i;
2647 for (i = 0; i < TX_CHANS; ++i)
2648 count += sprintf (page, " %u/%u",
2649 query_tx_channel_config (dev, i, BUCKET_FULLNESS_ACCESS),
2650 query_tx_channel_config (dev, i, BUCKET_CAPACITY_ACCESS));
2651 count += sprintf (page+count, ".\n");
2652 return count;
2653 }
2654#endif
2655
2656 if (!left--)
2657 return sprintf (page,
2658 "cells: TX %lu, RX %lu, HEC errors %lu, unassigned %lu.\n",
2659 dev->tx_cell_count, dev->rx_cell_count,
2660 dev->hec_error_count, dev->unassigned_cell_count);
2661
2662 if (!left--)
2663 return sprintf (page,
2664 "free cell buffers: TX %hu, RX %hu+%hu.\n",
2665 rd_regw (dev, TX_FREE_BUFFER_COUNT_OFF),
2666 rd_regw (dev, RX_FREE_BUFFER_COUNT_OFF),
2667 dev->noof_spare_buffers);
2668
2669 if (!left--)
2670 return sprintf (page,
2671 "cps remaining: TX %u, RX %u\n",
2672 dev->tx_avail, dev->rx_avail);
2673
2674 return 0;
2675}
2676
2677static const struct atmdev_ops hrz_ops = {
2678 .open = hrz_open,
2679 .close = hrz_close,
2680 .send = hrz_send,
2681 .proc_read = hrz_proc_read,
2682 .owner = THIS_MODULE,
2683};
2684
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08002685static int hrz_probe(struct pci_dev *pci_dev,
2686 const struct pci_device_id *pci_ent)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002687{
2688 hrz_dev * dev;
2689 int err = 0;
2690
2691 // adapter slot free, read resources from PCI configuration space
2692 u32 iobase = pci_resource_start (pci_dev, 0);
2693 u32 * membase = bus_to_virt (pci_resource_start (pci_dev, 1));
2694 unsigned int irq;
2695 unsigned char lat;
2696
2697 PRINTD (DBG_FLOW, "hrz_probe");
2698
2699 if (pci_enable_device(pci_dev))
2700 return -EINVAL;
2701
2702 /* XXX DEV_LABEL is a guess */
2703 if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) {
Jiri Slabyaac725c2008-11-29 20:42:28 -08002704 err = -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002705 goto out_disable;
2706 }
2707
Om Narasimhan0c1cca12006-10-03 16:27:18 -07002708 dev = kzalloc(sizeof(hrz_dev), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002709 if (!dev) {
2710 // perhaps we should be nice: deregister all adapters and abort?
2711 PRINTD(DBG_ERR, "out of memory");
2712 err = -ENOMEM;
2713 goto out_release;
2714 }
2715
Linus Torvalds1da177e2005-04-16 15:20:36 -07002716 pci_set_drvdata(pci_dev, dev);
2717
2718 // grab IRQ and install handler - move this someplace more sensible
2719 irq = pci_dev->irq;
2720 if (request_irq(irq,
2721 interrupt_handler,
Thomas Gleixnerdace1452006-07-01 19:29:38 -07002722 IRQF_SHARED, /* irqflags guess */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002723 DEV_LABEL, /* name guess */
2724 dev)) {
2725 PRINTD(DBG_WARN, "request IRQ failed!");
2726 err = -EINVAL;
2727 goto out_free;
2728 }
2729
2730 PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p",
2731 iobase, irq, membase);
2732
Dan Williamsd9ca6762010-12-08 19:40:47 +00002733 dev->atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &hrz_ops, -1,
2734 NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002735 if (!(dev->atm_dev)) {
2736 PRINTD(DBG_ERR, "failed to register Madge ATM adapter");
2737 err = -EINVAL;
2738 goto out_free_irq;
2739 }
2740
2741 PRINTD(DBG_INFO, "registered Madge ATM adapter (no. %d) (%p) at %p",
2742 dev->atm_dev->number, dev, dev->atm_dev);
2743 dev->atm_dev->dev_data = (void *) dev;
2744 dev->pci_dev = pci_dev;
2745
2746 // enable bus master accesses
2747 pci_set_master(pci_dev);
2748
2749 // frobnicate latency (upwards, usually)
2750 pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &lat);
2751 if (pci_lat) {
2752 PRINTD(DBG_INFO, "%s PCI latency timer from %hu to %hu",
2753 "changing", lat, pci_lat);
2754 pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, pci_lat);
2755 } else if (lat < MIN_PCI_LATENCY) {
2756 PRINTK(KERN_INFO, "%s PCI latency timer from %hu to %hu",
2757 "increasing", lat, MIN_PCI_LATENCY);
2758 pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, MIN_PCI_LATENCY);
2759 }
2760
2761 dev->iobase = iobase;
2762 dev->irq = irq;
2763 dev->membase = membase;
2764
2765 dev->rx_q_entry = dev->rx_q_reset = &memmap->rx_q_entries[0];
2766 dev->rx_q_wrap = &memmap->rx_q_entries[RX_CHANS-1];
2767
2768 // these next three are performance hacks
2769 dev->last_vc = -1;
2770 dev->tx_last = -1;
2771 dev->tx_idle = 0;
2772
2773 dev->tx_regions = 0;
2774 dev->tx_bytes = 0;
2775 dev->tx_skb = NULL;
2776 dev->tx_iovec = NULL;
2777
2778 dev->tx_cell_count = 0;
2779 dev->rx_cell_count = 0;
2780 dev->hec_error_count = 0;
2781 dev->unassigned_cell_count = 0;
2782
2783 dev->noof_spare_buffers = 0;
2784
2785 {
2786 unsigned int i;
2787 for (i = 0; i < TX_CHANS; ++i)
2788 dev->tx_channel_record[i] = -1;
2789 }
2790
2791 dev->flags = 0;
2792
2793 // Allocate cell rates and remember ASIC version
2794 // Fibre: ATM_OC3_PCR = 1555200000/8/270*260/53 - 29/53
2795 // Copper: (WRONG) we want 6 into the above, close to 25Mb/s
2796 // Copper: (plagarise!) 25600000/8/270*260/53 - n/53
2797
2798 if (hrz_init(dev)) {
2799 // to be really pedantic, this should be ATM_OC3c_PCR
2800 dev->tx_avail = ATM_OC3_PCR;
2801 dev->rx_avail = ATM_OC3_PCR;
2802 set_bit(ultra, &dev->flags); // NOT "|= ultra" !
2803 } else {
2804 dev->tx_avail = ((25600000/8)*26)/(27*53);
2805 dev->rx_avail = ((25600000/8)*26)/(27*53);
2806 PRINTD(DBG_WARN, "Buggy ASIC: no TX bus-mastering.");
2807 }
2808
2809 // rate changes spinlock
2810 spin_lock_init(&dev->rate_lock);
2811
2812 // on-board memory access spinlock; we want atomic reads and
2813 // writes to adapter memory (handles IRQ and SMP)
2814 spin_lock_init(&dev->mem_lock);
2815
2816 init_waitqueue_head(&dev->tx_queue);
2817
2818 // vpi in 0..4, vci in 6..10
2819 dev->atm_dev->ci_range.vpi_bits = vpi_bits;
2820 dev->atm_dev->ci_range.vci_bits = 10-vpi_bits;
2821
2822 init_timer(&dev->housekeeping);
2823 dev->housekeeping.function = do_housekeeping;
2824 dev->housekeeping.data = (unsigned long) dev;
2825 mod_timer(&dev->housekeeping, jiffies);
2826
2827out:
2828 return err;
2829
2830out_free_irq:
2831 free_irq(dev->irq, dev);
2832out_free:
2833 kfree(dev);
2834out_release:
2835 release_region(iobase, HRZ_IO_EXTENT);
2836out_disable:
2837 pci_disable_device(pci_dev);
2838 goto out;
2839}
2840
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08002841static void hrz_remove_one(struct pci_dev *pci_dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002842{
2843 hrz_dev *dev;
2844
2845 dev = pci_get_drvdata(pci_dev);
2846
2847 PRINTD(DBG_INFO, "closing %p (atm_dev = %p)", dev, dev->atm_dev);
2848 del_timer_sync(&dev->housekeeping);
2849 hrz_reset(dev);
2850 atm_dev_deregister(dev->atm_dev);
2851 free_irq(dev->irq, dev);
2852 release_region(dev->iobase, HRZ_IO_EXTENT);
2853 kfree(dev);
2854
2855 pci_disable_device(pci_dev);
2856}
2857
2858static void __init hrz_check_args (void) {
2859#ifdef DEBUG_HORIZON
2860 PRINTK (KERN_NOTICE, "debug bitmap is %hx", debug &= DBG_MASK);
2861#else
2862 if (debug)
2863 PRINTK (KERN_NOTICE, "no debug support in this image");
2864#endif
2865
2866 if (vpi_bits > HRZ_MAX_VPI)
2867 PRINTK (KERN_ERR, "vpi_bits has been limited to %hu",
2868 vpi_bits = HRZ_MAX_VPI);
2869
2870 if (max_tx_size < 0 || max_tx_size > TX_AAL5_LIMIT)
2871 PRINTK (KERN_NOTICE, "max_tx_size has been limited to %hu",
2872 max_tx_size = TX_AAL5_LIMIT);
2873
2874 if (max_rx_size < 0 || max_rx_size > RX_AAL5_LIMIT)
2875 PRINTK (KERN_NOTICE, "max_rx_size has been limited to %hu",
2876 max_rx_size = RX_AAL5_LIMIT);
2877
2878 return;
2879}
2880
2881MODULE_AUTHOR(maintainer_string);
2882MODULE_DESCRIPTION(description_string);
2883MODULE_LICENSE("GPL");
2884module_param(debug, ushort, 0644);
2885module_param(vpi_bits, ushort, 0);
2886module_param(max_tx_size, int, 0);
2887module_param(max_rx_size, int, 0);
2888module_param(pci_lat, byte, 0);
2889MODULE_PARM_DESC(debug, "debug bitmap, see .h file");
2890MODULE_PARM_DESC(vpi_bits, "number of bits (0..4) to allocate to VPIs");
2891MODULE_PARM_DESC(max_tx_size, "maximum size of TX AAL5 frames");
2892MODULE_PARM_DESC(max_rx_size, "maximum size of RX AAL5 frames");
2893MODULE_PARM_DESC(pci_lat, "PCI latency in bus cycles");
2894
2895static struct pci_device_id hrz_pci_tbl[] = {
2896 { PCI_VENDOR_ID_MADGE, PCI_DEVICE_ID_MADGE_HORIZON, PCI_ANY_ID, PCI_ANY_ID,
2897 0, 0, 0 },
2898 { 0, }
2899};
2900
2901MODULE_DEVICE_TABLE(pci, hrz_pci_tbl);
2902
2903static struct pci_driver hrz_driver = {
2904 .name = "horizon",
2905 .probe = hrz_probe,
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08002906 .remove = hrz_remove_one,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002907 .id_table = hrz_pci_tbl,
2908};
2909
2910/********** module entry **********/
2911
2912static int __init hrz_module_init (void) {
2913 // sanity check - cast is needed since printk does not support %Zu
2914 if (sizeof(struct MEMMAP) != 128*1024/4) {
2915 PRINTK (KERN_ERR, "Fix struct MEMMAP (is %lu fakewords).",
2916 (unsigned long) sizeof(struct MEMMAP));
2917 return -ENOMEM;
2918 }
2919
2920 show_version();
2921
2922 // check arguments
2923 hrz_check_args();
2924
2925 // get the juice
2926 return pci_register_driver(&hrz_driver);
2927}
2928
2929/********** module exit **********/
2930
2931static void __exit hrz_module_exit (void) {
2932 PRINTD (DBG_FLOW, "cleanup_module");
Tobias Klauserb45eccd2006-10-20 19:49:45 -07002933
2934 pci_unregister_driver(&hrz_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002935}
2936
2937module_init(hrz_module_init);
2938module_exit(hrz_module_exit);