Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1 | /* |
| 2 | * Rafael Micro R820T driver |
| 3 | * |
| 4 | * Copyright (C) 2013 Mauro Carvalho Chehab <mchehab@redhat.com> |
| 5 | * |
| 6 | * This driver was written from scratch, based on an existing driver |
| 7 | * that it is part of rtl-sdr git tree, released under GPLv2: |
| 8 | * https://groups.google.com/forum/#!topic/ultra-cheap-sdr/Y3rBEOFtHug |
| 9 | * https://github.com/n1gp/gr-baz |
| 10 | * |
| 11 | * From what I understood from the threads, the original driver was converted |
| 12 | * to userspace from a Realtek tree. I couldn't find the original tree. |
| 13 | * However, the original driver look awkward on my eyes. So, I decided to |
| 14 | * write a new version from it from the scratch, while trying to reproduce |
| 15 | * everything found there. |
| 16 | * |
| 17 | * TODO: |
| 18 | * After locking, the original driver seems to have some routines to |
| 19 | * improve reception. This was not implemented here yet. |
| 20 | * |
| 21 | * RF Gain set/get is not implemented. |
| 22 | * |
| 23 | * This program is free software; you can redistribute it and/or modify |
| 24 | * it under the terms of the GNU General Public License as published by |
| 25 | * the Free Software Foundation; either version 2 of the License, or |
| 26 | * (at your option) any later version. |
| 27 | * |
| 28 | * This program is distributed in the hope that it will be useful, |
| 29 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 30 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 31 | * GNU General Public License for more details. |
| 32 | * |
| 33 | */ |
| 34 | |
| 35 | #include <linux/videodev2.h> |
| 36 | #include <linux/mutex.h> |
| 37 | #include <linux/slab.h> |
| 38 | #include "tuner-i2c.h" |
| 39 | #include <asm/div64.h> |
| 40 | #include "r820t.h" |
| 41 | |
| 42 | /* |
| 43 | * FIXME: I think that there are only 32 registers, but better safe than |
| 44 | * sorry. After finishing the driver, we may review it. |
| 45 | */ |
| 46 | #define REG_SHADOW_START 5 |
| 47 | #define NUM_REGS 27 |
| 48 | |
| 49 | #define VER_NUM 49 |
| 50 | |
| 51 | static int debug; |
| 52 | module_param(debug, int, 0644); |
| 53 | MODULE_PARM_DESC(debug, "enable verbose debug messages"); |
| 54 | |
| 55 | /* |
| 56 | * enums and structures |
| 57 | */ |
| 58 | |
| 59 | enum xtal_cap_value { |
| 60 | XTAL_LOW_CAP_30P = 0, |
| 61 | XTAL_LOW_CAP_20P, |
| 62 | XTAL_LOW_CAP_10P, |
| 63 | XTAL_LOW_CAP_0P, |
| 64 | XTAL_HIGH_CAP_0P |
| 65 | }; |
| 66 | |
| 67 | struct r820t_priv { |
| 68 | struct list_head hybrid_tuner_instance_list; |
| 69 | const struct r820t_config *cfg; |
| 70 | struct tuner_i2c_props i2c_props; |
| 71 | struct mutex lock; |
| 72 | |
| 73 | u8 regs[NUM_REGS]; |
| 74 | u8 buf[NUM_REGS + 1]; |
| 75 | enum xtal_cap_value xtal_cap_sel; |
| 76 | u16 pll; /* kHz */ |
| 77 | u32 int_freq; |
| 78 | u8 fil_cal_code; |
| 79 | bool imr_done; |
| 80 | |
| 81 | /* Store current mode */ |
| 82 | u32 delsys; |
| 83 | enum v4l2_tuner_type type; |
| 84 | v4l2_std_id std; |
| 85 | u32 bw; /* in MHz */ |
| 86 | |
| 87 | bool has_lock; |
| 88 | }; |
| 89 | |
| 90 | struct r820t_freq_range { |
| 91 | u32 freq; |
| 92 | u8 open_d; |
| 93 | u8 rf_mux_ploy; |
| 94 | u8 tf_c; |
| 95 | u8 xtal_cap20p; |
| 96 | u8 xtal_cap10p; |
| 97 | u8 xtal_cap0p; |
| 98 | u8 imr_mem; /* Not used, currently */ |
| 99 | }; |
| 100 | |
| 101 | #define VCO_POWER_REF 0x02 |
| 102 | |
| 103 | /* |
| 104 | * Static constants |
| 105 | */ |
| 106 | |
| 107 | static LIST_HEAD(hybrid_tuner_instance_list); |
| 108 | static DEFINE_MUTEX(r820t_list_mutex); |
| 109 | |
| 110 | /* Those initial values start from REG_SHADOW_START */ |
| 111 | static const u8 r820t_init_array[NUM_REGS] = { |
| 112 | 0x83, 0x32, 0x75, /* 05 to 07 */ |
| 113 | 0xc0, 0x40, 0xd6, 0x6c, /* 08 to 0b */ |
| 114 | 0xf5, 0x63, 0x75, 0x68, /* 0c to 0f */ |
| 115 | 0x6c, 0x83, 0x80, 0x00, /* 10 to 13 */ |
| 116 | 0x0f, 0x00, 0xc0, 0x30, /* 14 to 17 */ |
| 117 | 0x48, 0xcc, 0x60, 0x00, /* 18 to 1b */ |
| 118 | 0x54, 0xae, 0x4a, 0xc0 /* 1c to 1f */ |
| 119 | }; |
| 120 | |
| 121 | /* Tuner frequency ranges */ |
| 122 | static const struct r820t_freq_range freq_ranges[] = { |
| 123 | { |
| 124 | .freq = 0, |
| 125 | .open_d = 0x08, /* low */ |
| 126 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 127 | .tf_c = 0xdf, /* R27[7:0] band2,band0 */ |
| 128 | .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ |
| 129 | .xtal_cap10p = 0x01, |
| 130 | .xtal_cap0p = 0x00, |
| 131 | .imr_mem = 0, |
| 132 | }, { |
| 133 | .freq = 50, /* Start freq, in MHz */ |
| 134 | .open_d = 0x08, /* low */ |
| 135 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 136 | .tf_c = 0xbe, /* R27[7:0] band4,band1 */ |
| 137 | .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ |
| 138 | .xtal_cap10p = 0x01, |
| 139 | .xtal_cap0p = 0x00, |
| 140 | .imr_mem = 0, |
| 141 | }, { |
| 142 | .freq = 55, /* Start freq, in MHz */ |
| 143 | .open_d = 0x08, /* low */ |
| 144 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 145 | .tf_c = 0x8b, /* R27[7:0] band7,band4 */ |
| 146 | .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ |
| 147 | .xtal_cap10p = 0x01, |
| 148 | .xtal_cap0p = 0x00, |
| 149 | .imr_mem = 0, |
| 150 | }, { |
| 151 | .freq = 60, /* Start freq, in MHz */ |
| 152 | .open_d = 0x08, /* low */ |
| 153 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 154 | .tf_c = 0x7b, /* R27[7:0] band8,band4 */ |
| 155 | .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ |
| 156 | .xtal_cap10p = 0x01, |
| 157 | .xtal_cap0p = 0x00, |
| 158 | .imr_mem = 0, |
| 159 | }, { |
| 160 | .freq = 65, /* Start freq, in MHz */ |
| 161 | .open_d = 0x08, /* low */ |
| 162 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 163 | .tf_c = 0x69, /* R27[7:0] band9,band6 */ |
| 164 | .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ |
| 165 | .xtal_cap10p = 0x01, |
| 166 | .xtal_cap0p = 0x00, |
| 167 | .imr_mem = 0, |
| 168 | }, { |
| 169 | .freq = 70, /* Start freq, in MHz */ |
| 170 | .open_d = 0x08, /* low */ |
| 171 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 172 | .tf_c = 0x58, /* R27[7:0] band10,band7 */ |
| 173 | .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ |
| 174 | .xtal_cap10p = 0x01, |
| 175 | .xtal_cap0p = 0x00, |
| 176 | .imr_mem = 0, |
| 177 | }, { |
| 178 | .freq = 75, /* Start freq, in MHz */ |
| 179 | .open_d = 0x00, /* high */ |
| 180 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 181 | .tf_c = 0x44, /* R27[7:0] band11,band11 */ |
| 182 | .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ |
| 183 | .xtal_cap10p = 0x01, |
| 184 | .xtal_cap0p = 0x00, |
| 185 | .imr_mem = 0, |
| 186 | }, { |
| 187 | .freq = 80, /* Start freq, in MHz */ |
| 188 | .open_d = 0x00, /* high */ |
| 189 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 190 | .tf_c = 0x44, /* R27[7:0] band11,band11 */ |
| 191 | .xtal_cap20p = 0x02, /* R16[1:0] 20pF (10) */ |
| 192 | .xtal_cap10p = 0x01, |
| 193 | .xtal_cap0p = 0x00, |
| 194 | .imr_mem = 0, |
| 195 | }, { |
| 196 | .freq = 90, /* Start freq, in MHz */ |
| 197 | .open_d = 0x00, /* high */ |
| 198 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 199 | .tf_c = 0x34, /* R27[7:0] band12,band11 */ |
| 200 | .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ |
| 201 | .xtal_cap10p = 0x01, |
| 202 | .xtal_cap0p = 0x00, |
| 203 | .imr_mem = 0, |
| 204 | }, { |
| 205 | .freq = 100, /* Start freq, in MHz */ |
| 206 | .open_d = 0x00, /* high */ |
| 207 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 208 | .tf_c = 0x34, /* R27[7:0] band12,band11 */ |
| 209 | .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ |
| 210 | .xtal_cap10p = 0x01, |
| 211 | .xtal_cap0p = 0x00, |
| 212 | .imr_mem = 0, |
| 213 | }, { |
| 214 | .freq = 110, /* Start freq, in MHz */ |
| 215 | .open_d = 0x00, /* high */ |
| 216 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 217 | .tf_c = 0x24, /* R27[7:0] band13,band11 */ |
| 218 | .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ |
| 219 | .xtal_cap10p = 0x01, |
| 220 | .xtal_cap0p = 0x00, |
| 221 | .imr_mem = 1, |
| 222 | }, { |
| 223 | .freq = 120, /* Start freq, in MHz */ |
| 224 | .open_d = 0x00, /* high */ |
| 225 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 226 | .tf_c = 0x24, /* R27[7:0] band13,band11 */ |
| 227 | .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ |
| 228 | .xtal_cap10p = 0x01, |
| 229 | .xtal_cap0p = 0x00, |
| 230 | .imr_mem = 1, |
| 231 | }, { |
| 232 | .freq = 140, /* Start freq, in MHz */ |
| 233 | .open_d = 0x00, /* high */ |
| 234 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 235 | .tf_c = 0x14, /* R27[7:0] band14,band11 */ |
| 236 | .xtal_cap20p = 0x01, /* R16[1:0] 10pF (01) */ |
| 237 | .xtal_cap10p = 0x01, |
| 238 | .xtal_cap0p = 0x00, |
| 239 | .imr_mem = 1, |
| 240 | }, { |
| 241 | .freq = 180, /* Start freq, in MHz */ |
| 242 | .open_d = 0x00, /* high */ |
| 243 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 244 | .tf_c = 0x13, /* R27[7:0] band14,band12 */ |
| 245 | .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ |
| 246 | .xtal_cap10p = 0x00, |
| 247 | .xtal_cap0p = 0x00, |
| 248 | .imr_mem = 1, |
| 249 | }, { |
| 250 | .freq = 220, /* Start freq, in MHz */ |
| 251 | .open_d = 0x00, /* high */ |
| 252 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 253 | .tf_c = 0x13, /* R27[7:0] band14,band12 */ |
| 254 | .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ |
| 255 | .xtal_cap10p = 0x00, |
| 256 | .xtal_cap0p = 0x00, |
| 257 | .imr_mem = 2, |
| 258 | }, { |
| 259 | .freq = 250, /* Start freq, in MHz */ |
| 260 | .open_d = 0x00, /* high */ |
| 261 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 262 | .tf_c = 0x11, /* R27[7:0] highest,highest */ |
| 263 | .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ |
| 264 | .xtal_cap10p = 0x00, |
| 265 | .xtal_cap0p = 0x00, |
| 266 | .imr_mem = 2, |
| 267 | }, { |
| 268 | .freq = 280, /* Start freq, in MHz */ |
| 269 | .open_d = 0x00, /* high */ |
| 270 | .rf_mux_ploy = 0x02, /* R26[7:6]=0 (LPF) R26[1:0]=2 (low) */ |
| 271 | .tf_c = 0x00, /* R27[7:0] highest,highest */ |
| 272 | .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ |
| 273 | .xtal_cap10p = 0x00, |
| 274 | .xtal_cap0p = 0x00, |
| 275 | .imr_mem = 2, |
| 276 | }, { |
| 277 | .freq = 310, /* Start freq, in MHz */ |
| 278 | .open_d = 0x00, /* high */ |
| 279 | .rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */ |
| 280 | .tf_c = 0x00, /* R27[7:0] highest,highest */ |
| 281 | .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ |
| 282 | .xtal_cap10p = 0x00, |
| 283 | .xtal_cap0p = 0x00, |
| 284 | .imr_mem = 2, |
| 285 | }, { |
| 286 | .freq = 450, /* Start freq, in MHz */ |
| 287 | .open_d = 0x00, /* high */ |
| 288 | .rf_mux_ploy = 0x41, /* R26[7:6]=1 (bypass) R26[1:0]=1 (middle) */ |
| 289 | .tf_c = 0x00, /* R27[7:0] highest,highest */ |
| 290 | .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ |
| 291 | .xtal_cap10p = 0x00, |
| 292 | .xtal_cap0p = 0x00, |
| 293 | .imr_mem = 3, |
| 294 | }, { |
| 295 | .freq = 588, /* Start freq, in MHz */ |
| 296 | .open_d = 0x00, /* high */ |
| 297 | .rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */ |
| 298 | .tf_c = 0x00, /* R27[7:0] highest,highest */ |
| 299 | .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ |
| 300 | .xtal_cap10p = 0x00, |
| 301 | .xtal_cap0p = 0x00, |
| 302 | .imr_mem = 3, |
| 303 | }, { |
| 304 | .freq = 650, /* Start freq, in MHz */ |
| 305 | .open_d = 0x00, /* high */ |
| 306 | .rf_mux_ploy = 0x40, /* R26[7:6]=1 (bypass) R26[1:0]=0 (highest) */ |
| 307 | .tf_c = 0x00, /* R27[7:0] highest,highest */ |
| 308 | .xtal_cap20p = 0x00, /* R16[1:0] 0pF (00) */ |
| 309 | .xtal_cap10p = 0x00, |
| 310 | .xtal_cap0p = 0x00, |
| 311 | .imr_mem = 4, |
| 312 | } |
| 313 | }; |
| 314 | |
| 315 | static int r820t_xtal_capacitor[][2] = { |
| 316 | { 0x0b, XTAL_LOW_CAP_30P }, |
| 317 | { 0x02, XTAL_LOW_CAP_20P }, |
| 318 | { 0x01, XTAL_LOW_CAP_10P }, |
| 319 | { 0x00, XTAL_LOW_CAP_0P }, |
| 320 | { 0x10, XTAL_HIGH_CAP_0P }, |
| 321 | }; |
| 322 | |
| 323 | /* |
Mauro Carvalho Chehab | 50786dd | 2013-04-07 18:33:13 -0300 | [diff] [blame] | 324 | * measured with a Racal 6103E GSM test set at 928 MHz with -60 dBm |
| 325 | * input power, for raw results see: |
| 326 | * http://steve-m.de/projects/rtl-sdr/gain_measurement/r820t/ |
| 327 | */ |
| 328 | |
| 329 | static const int r820t_lna_gain_steps[] = { |
| 330 | 0, 9, 13, 40, 38, 13, 31, 22, 26, 31, 26, 14, 19, 5, 35, 13 |
| 331 | }; |
| 332 | |
| 333 | static const int r820t_mixer_gain_steps[] = { |
| 334 | 0, 5, 10, 10, 19, 9, 10, 25, 17, 10, 8, 16, 13, 6, 3, -8 |
| 335 | }; |
| 336 | |
| 337 | /* |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 338 | * I2C read/write code and shadow registers logic |
| 339 | */ |
| 340 | static void shadow_store(struct r820t_priv *priv, u8 reg, const u8 *val, |
| 341 | int len) |
| 342 | { |
| 343 | int r = reg - REG_SHADOW_START; |
| 344 | |
| 345 | if (r < 0) { |
| 346 | len += r; |
| 347 | r = 0; |
| 348 | } |
| 349 | if (len <= 0) |
| 350 | return; |
| 351 | if (len > NUM_REGS) |
| 352 | len = NUM_REGS; |
| 353 | |
| 354 | tuner_dbg("%s: prev reg=%02x len=%d: %*ph\n", |
| 355 | __func__, r + REG_SHADOW_START, len, len, val); |
| 356 | |
| 357 | memcpy(&priv->regs[r], val, len); |
| 358 | } |
| 359 | |
| 360 | static int r820t_write(struct r820t_priv *priv, u8 reg, const u8 *val, |
| 361 | int len) |
| 362 | { |
| 363 | int rc, size, pos = 0; |
| 364 | |
| 365 | /* Store the shadow registers */ |
| 366 | shadow_store(priv, reg, val, len); |
| 367 | |
| 368 | do { |
| 369 | if (len > priv->cfg->max_i2c_msg_len - 1) |
| 370 | size = priv->cfg->max_i2c_msg_len - 1; |
| 371 | else |
| 372 | size = len; |
| 373 | |
| 374 | /* Fill I2C buffer */ |
| 375 | priv->buf[0] = reg; |
| 376 | memcpy(&priv->buf[1], &val[pos], size); |
| 377 | |
| 378 | rc = tuner_i2c_xfer_send(&priv->i2c_props, priv->buf, size + 1); |
| 379 | if (rc != size + 1) { |
| 380 | tuner_info("%s: i2c wr failed=%d reg=%02x len=%d: %*ph\n", |
| 381 | __func__, rc, reg, size, size, &priv->buf[1]); |
| 382 | if (rc < 0) |
| 383 | return rc; |
| 384 | return -EREMOTEIO; |
| 385 | } |
| 386 | tuner_dbg("%s: i2c wr reg=%02x len=%d: %*ph\n", |
| 387 | __func__, reg, size, size, &priv->buf[1]); |
| 388 | |
| 389 | reg += size; |
| 390 | len -= size; |
| 391 | pos += size; |
| 392 | } while (len > 0); |
| 393 | |
| 394 | return 0; |
| 395 | } |
| 396 | |
| 397 | static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val) |
| 398 | { |
| 399 | return r820t_write(priv, reg, &val, 1); |
| 400 | } |
| 401 | |
| 402 | static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val, |
| 403 | u8 bit_mask) |
| 404 | { |
| 405 | int r = reg - REG_SHADOW_START; |
| 406 | |
| 407 | if (r >= 0 && r < NUM_REGS) |
| 408 | val = (priv->regs[r] & ~bit_mask) | (val & bit_mask); |
| 409 | else |
| 410 | return -EINVAL; |
| 411 | |
| 412 | return r820t_write(priv, reg, &val, 1); |
| 413 | } |
| 414 | |
| 415 | static int r820_read(struct r820t_priv *priv, u8 reg, u8 *val, int len) |
| 416 | { |
| 417 | int rc; |
| 418 | u8 *p = &priv->buf[1]; |
| 419 | |
| 420 | priv->buf[0] = reg; |
| 421 | |
| 422 | rc = tuner_i2c_xfer_send_recv(&priv->i2c_props, priv->buf, 1, p, len); |
| 423 | if (rc != len) { |
| 424 | tuner_info("%s: i2c rd failed=%d reg=%02x len=%d: %*ph\n", |
| 425 | __func__, rc, reg, len, len, p); |
| 426 | if (rc < 0) |
| 427 | return rc; |
| 428 | return -EREMOTEIO; |
| 429 | } |
| 430 | tuner_dbg("%s: i2c rd reg=%02x len=%d: %*ph\n", |
| 431 | __func__, reg, len, len, p); |
| 432 | |
| 433 | /* Copy data to the output buffer */ |
| 434 | memcpy(val, p, len); |
| 435 | |
| 436 | return 0; |
| 437 | } |
| 438 | |
| 439 | /* |
| 440 | * r820t tuning logic |
| 441 | */ |
| 442 | |
| 443 | static int r820t_set_mux(struct r820t_priv *priv, u32 freq) |
| 444 | { |
| 445 | const struct r820t_freq_range *range; |
| 446 | int i, rc; |
| 447 | u8 val; |
| 448 | |
| 449 | /* Get the proper frequency range */ |
| 450 | freq = freq / 1000000; |
| 451 | for (i = 0; i < ARRAY_SIZE(freq_ranges) - 1; i++) { |
| 452 | if (freq < freq_ranges[i + 1].freq) |
| 453 | break; |
| 454 | } |
| 455 | range = &freq_ranges[i]; |
| 456 | |
| 457 | tuner_dbg("set r820t range#%d for frequency %d MHz\n", i, freq); |
| 458 | |
| 459 | /* Open Drain */ |
| 460 | rc = r820t_write_reg_mask(priv, 0x17, range->open_d, 0x08); |
| 461 | if (rc < 0) |
| 462 | return rc; |
| 463 | |
| 464 | /* RF_MUX,Polymux */ |
| 465 | rc = r820t_write_reg_mask(priv, 0x1a, range->rf_mux_ploy, 0xc3); |
| 466 | if (rc < 0) |
| 467 | return rc; |
| 468 | |
| 469 | /* TF BAND */ |
| 470 | rc = r820t_write_reg(priv, 0x1b, range->tf_c); |
| 471 | if (rc < 0) |
| 472 | return rc; |
| 473 | |
| 474 | /* XTAL CAP & Drive */ |
| 475 | switch (priv->xtal_cap_sel) { |
| 476 | case XTAL_LOW_CAP_30P: |
| 477 | case XTAL_LOW_CAP_20P: |
| 478 | val = range->xtal_cap20p | 0x08; |
| 479 | break; |
| 480 | case XTAL_LOW_CAP_10P: |
| 481 | val = range->xtal_cap10p | 0x08; |
| 482 | break; |
| 483 | case XTAL_HIGH_CAP_0P: |
| 484 | val = range->xtal_cap0p | 0x00; |
| 485 | break; |
| 486 | default: |
| 487 | case XTAL_LOW_CAP_0P: |
| 488 | val = range->xtal_cap0p | 0x08; |
| 489 | break; |
| 490 | } |
| 491 | rc = r820t_write_reg_mask(priv, 0x10, val, 0x0b); |
| 492 | if (rc < 0) |
| 493 | return rc; |
| 494 | |
| 495 | /* |
| 496 | * FIXME: the original driver has a logic there with preserves |
| 497 | * gain/phase from registers 8 and 9 reading the data from the |
| 498 | * registers before writing, if "IMF done". That code was sort of |
| 499 | * commented there, as the flag is always false. |
| 500 | */ |
| 501 | rc = r820t_write_reg_mask(priv, 0x08, 0, 0x3f); |
| 502 | if (rc < 0) |
| 503 | return rc; |
| 504 | |
| 505 | rc = r820t_write_reg_mask(priv, 0x09, 0, 0x3f); |
| 506 | |
| 507 | return rc; |
| 508 | } |
| 509 | |
| 510 | static int r820t_set_pll(struct r820t_priv *priv, u32 freq) |
| 511 | { |
| 512 | u64 tmp64, vco_freq; |
| 513 | int rc, i; |
| 514 | u32 vco_fra; /* VCO contribution by SDM (kHz) */ |
| 515 | u32 vco_min = 1770000; |
| 516 | u32 vco_max = vco_min * 2; |
| 517 | u32 pll_ref; |
| 518 | u16 n_sdm = 2; |
| 519 | u16 sdm = 0; |
| 520 | u8 mix_div = 2; |
| 521 | u8 div_buf = 0; |
| 522 | u8 div_num = 0; |
| 523 | u8 ni, si, nint, vco_fine_tune, val; |
| 524 | u8 data[5]; |
| 525 | |
| 526 | freq = freq / 1000; /* Frequency in kHz */ |
| 527 | |
| 528 | pll_ref = priv->cfg->xtal / 1000; |
| 529 | |
| 530 | tuner_dbg("set r820t pll for frequency %d kHz = %d\n", freq, pll_ref); |
| 531 | |
| 532 | /* FIXME: this seems to be a hack - probably it can be removed */ |
| 533 | rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x00); |
| 534 | if (rc < 0) |
| 535 | return rc; |
| 536 | |
| 537 | /* set pll autotune = 128kHz */ |
| 538 | rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c); |
| 539 | if (rc < 0) |
| 540 | return rc; |
| 541 | |
| 542 | /* set VCO current = 100 */ |
| 543 | rc = r820t_write_reg_mask(priv, 0x12, 0x80, 0xe0); |
| 544 | if (rc < 0) |
| 545 | return rc; |
| 546 | |
| 547 | /* Calculate divider */ |
| 548 | while (mix_div <= 64) { |
| 549 | if (((freq * mix_div) >= vco_min) && |
| 550 | ((freq * mix_div) < vco_max)) { |
| 551 | div_buf = mix_div; |
| 552 | while (div_buf > 2) { |
| 553 | div_buf = div_buf >> 1; |
| 554 | div_num++; |
| 555 | } |
| 556 | break; |
| 557 | } |
| 558 | mix_div = mix_div << 1; |
| 559 | } |
| 560 | |
| 561 | rc = r820_read(priv, 0x00, data, sizeof(data)); |
| 562 | if (rc < 0) |
| 563 | return rc; |
| 564 | |
| 565 | vco_fine_tune = (data[4] & 0x30) >> 4; |
| 566 | |
| 567 | if (vco_fine_tune > VCO_POWER_REF) |
| 568 | div_num = div_num - 1; |
| 569 | else if (vco_fine_tune < VCO_POWER_REF) |
| 570 | div_num = div_num + 1; |
| 571 | |
| 572 | rc = r820t_write_reg_mask(priv, 0x10, div_num << 5, 0xe0); |
| 573 | if (rc < 0) |
| 574 | return rc; |
| 575 | |
| 576 | vco_freq = (u64)(freq * (u64)mix_div); |
| 577 | |
| 578 | tmp64 = vco_freq; |
| 579 | do_div(tmp64, 2 * pll_ref); |
| 580 | nint = (u8)tmp64; |
| 581 | |
| 582 | tmp64 = vco_freq - ((u64)2) * pll_ref * nint; |
| 583 | do_div(tmp64, 1000); |
| 584 | vco_fra = (u16)(tmp64); |
| 585 | |
| 586 | pll_ref /= 1000; |
| 587 | |
| 588 | /* boundary spur prevention */ |
| 589 | if (vco_fra < pll_ref / 64) { |
| 590 | vco_fra = 0; |
| 591 | } else if (vco_fra > pll_ref * 127 / 64) { |
| 592 | vco_fra = 0; |
| 593 | nint++; |
| 594 | } else if ((vco_fra > pll_ref * 127 / 128) && (vco_fra < pll_ref)) { |
| 595 | vco_fra = pll_ref * 127 / 128; |
| 596 | } else if ((vco_fra > pll_ref) && (vco_fra < pll_ref * 129 / 128)) { |
| 597 | vco_fra = pll_ref * 129 / 128; |
| 598 | } |
| 599 | |
| 600 | if (nint > 63) { |
| 601 | tuner_info("No valid PLL values for %u kHz!\n", freq); |
| 602 | return -EINVAL; |
| 603 | } |
| 604 | |
| 605 | ni = (nint - 13) / 4; |
| 606 | si = nint - 4 * ni - 13; |
| 607 | |
| 608 | rc = r820t_write_reg(priv, 0x14, ni + (si << 6)); |
| 609 | if (rc < 0) |
| 610 | return rc; |
| 611 | |
| 612 | /* pw_sdm */ |
| 613 | if (!vco_fra) |
| 614 | val = 0x08; |
| 615 | else |
| 616 | val = 0x00; |
| 617 | |
| 618 | rc = r820t_write_reg_mask(priv, 0x12, val, 0x08); |
| 619 | if (rc < 0) |
| 620 | return rc; |
| 621 | |
| 622 | /* sdm calculator */ |
| 623 | while (vco_fra > 1) { |
| 624 | if (vco_fra > (2 * pll_ref / n_sdm)) { |
| 625 | sdm = sdm + 32768 / (n_sdm / 2); |
| 626 | vco_fra = vco_fra - 2 * pll_ref / n_sdm; |
| 627 | if (n_sdm >= 0x8000) |
| 628 | break; |
| 629 | } |
| 630 | n_sdm = n_sdm << 1; |
| 631 | } |
| 632 | |
| 633 | rc = r820t_write_reg_mask(priv, 0x16, sdm >> 8, 0x08); |
| 634 | if (rc < 0) |
| 635 | return rc; |
| 636 | rc = r820t_write_reg_mask(priv, 0x15, sdm & 0xff, 0x08); |
| 637 | if (rc < 0) |
| 638 | return rc; |
| 639 | |
| 640 | for (i = 0; i < 2; i++) { |
| 641 | /* |
| 642 | * FIXME: Rafael chips R620D, R828D and R828 seems to |
| 643 | * need 20 ms for analog TV |
| 644 | */ |
| 645 | msleep(10); |
| 646 | |
| 647 | /* Check if PLL has locked */ |
| 648 | rc = r820_read(priv, 0x00, data, 3); |
| 649 | if (rc < 0) |
| 650 | return rc; |
| 651 | if (data[2] & 0x40) |
| 652 | break; |
| 653 | |
| 654 | if (!i) { |
| 655 | /* Didn't lock. Increase VCO current */ |
| 656 | rc = r820t_write_reg_mask(priv, 0x12, 0x60, 0xe0); |
| 657 | if (rc < 0) |
| 658 | return rc; |
| 659 | } |
| 660 | } |
| 661 | |
| 662 | if (!(data[2] & 0x40)) { |
| 663 | priv->has_lock = false; |
| 664 | return 0; |
| 665 | } |
| 666 | |
| 667 | priv->has_lock = true; |
| 668 | tuner_dbg("tuner has lock at frequency %d kHz\n", freq); |
| 669 | |
| 670 | /* set pll autotune = 8kHz */ |
| 671 | rc = r820t_write_reg_mask(priv, 0x1a, 0x08, 0x08); |
| 672 | |
| 673 | return rc; |
| 674 | } |
| 675 | |
| 676 | static int r820t_sysfreq_sel(struct r820t_priv *priv, u32 freq, |
| 677 | enum v4l2_tuner_type type, |
| 678 | v4l2_std_id std, |
| 679 | u32 delsys) |
| 680 | { |
| 681 | int rc; |
| 682 | u8 mixer_top, lna_top, cp_cur, div_buf_cur, lna_vth_l, mixer_vth_l; |
| 683 | u8 air_cable1_in, cable2_in, pre_dect, lna_discharge, filter_cur; |
| 684 | |
| 685 | tuner_dbg("adjusting tuner parameters for the standard\n"); |
| 686 | |
| 687 | switch (delsys) { |
| 688 | case SYS_DVBT: |
| 689 | if ((freq == 506000000) || (freq == 666000000) || |
| 690 | (freq == 818000000)) { |
| 691 | mixer_top = 0x14; /* mixer top:14 , top-1, low-discharge */ |
| 692 | lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ |
| 693 | cp_cur = 0x28; /* 101, 0.2 */ |
| 694 | div_buf_cur = 0x20; /* 10, 200u */ |
| 695 | } else { |
| 696 | mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ |
| 697 | lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ |
| 698 | cp_cur = 0x38; /* 111, auto */ |
| 699 | div_buf_cur = 0x30; /* 11, 150u */ |
| 700 | } |
| 701 | lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ |
| 702 | mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ |
| 703 | air_cable1_in = 0x00; |
| 704 | cable2_in = 0x00; |
| 705 | pre_dect = 0x40; |
| 706 | lna_discharge = 14; |
| 707 | filter_cur = 0x40; /* 10, low */ |
| 708 | break; |
| 709 | case SYS_DVBT2: |
| 710 | mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ |
| 711 | lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ |
| 712 | lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ |
| 713 | mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ |
| 714 | air_cable1_in = 0x00; |
| 715 | cable2_in = 0x00; |
| 716 | pre_dect = 0x40; |
| 717 | lna_discharge = 14; |
| 718 | cp_cur = 0x38; /* 111, auto */ |
| 719 | div_buf_cur = 0x30; /* 11, 150u */ |
| 720 | filter_cur = 0x40; /* 10, low */ |
| 721 | break; |
| 722 | case SYS_ISDBT: |
| 723 | mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ |
| 724 | lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ |
| 725 | lna_vth_l = 0x75; /* lna vth 1.04 , vtl 0.84 */ |
| 726 | mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ |
| 727 | air_cable1_in = 0x00; |
| 728 | cable2_in = 0x00; |
| 729 | pre_dect = 0x40; |
| 730 | lna_discharge = 14; |
| 731 | cp_cur = 0x38; /* 111, auto */ |
| 732 | div_buf_cur = 0x30; /* 11, 150u */ |
| 733 | filter_cur = 0x40; /* 10, low */ |
| 734 | break; |
| 735 | default: /* DVB-T 8M */ |
| 736 | mixer_top = 0x24; /* mixer top:13 , top-1, low-discharge */ |
| 737 | lna_top = 0xe5; /* detect bw 3, lna top:4, predet top:2 */ |
| 738 | lna_vth_l = 0x53; /* lna vth 0.84 , vtl 0.64 */ |
| 739 | mixer_vth_l = 0x75; /* mixer vth 1.04, vtl 0.84 */ |
| 740 | air_cable1_in = 0x00; |
| 741 | cable2_in = 0x00; |
| 742 | pre_dect = 0x40; |
| 743 | lna_discharge = 14; |
| 744 | cp_cur = 0x38; /* 111, auto */ |
| 745 | div_buf_cur = 0x30; /* 11, 150u */ |
| 746 | filter_cur = 0x40; /* 10, low */ |
| 747 | break; |
| 748 | } |
| 749 | |
| 750 | rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0xc7); |
| 751 | if (rc < 0) |
| 752 | return rc; |
| 753 | rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0xf8); |
| 754 | if (rc < 0) |
| 755 | return rc; |
| 756 | rc = r820t_write_reg(priv, 0x0d, lna_vth_l); |
| 757 | if (rc < 0) |
| 758 | return rc; |
| 759 | rc = r820t_write_reg(priv, 0x0e, mixer_vth_l); |
| 760 | if (rc < 0) |
| 761 | return rc; |
| 762 | |
| 763 | /* Air-IN only for Astrometa */ |
| 764 | rc = r820t_write_reg_mask(priv, 0x05, air_cable1_in, 0x60); |
| 765 | if (rc < 0) |
| 766 | return rc; |
| 767 | rc = r820t_write_reg_mask(priv, 0x06, cable2_in, 0x08); |
| 768 | if (rc < 0) |
| 769 | return rc; |
| 770 | |
| 771 | rc = r820t_write_reg_mask(priv, 0x11, cp_cur, 0x38); |
| 772 | if (rc < 0) |
| 773 | return rc; |
| 774 | rc = r820t_write_reg_mask(priv, 0x17, div_buf_cur, 0x30); |
| 775 | if (rc < 0) |
| 776 | return rc; |
| 777 | rc = r820t_write_reg_mask(priv, 0x0a, filter_cur, 0x60); |
| 778 | if (rc < 0) |
| 779 | return rc; |
| 780 | /* |
| 781 | * Original driver initializes regs 0x05 and 0x06 with the |
| 782 | * same value again on this point. Probably, it is just an |
| 783 | * error there |
| 784 | */ |
| 785 | |
| 786 | /* |
| 787 | * Set LNA |
| 788 | */ |
| 789 | |
| 790 | tuner_dbg("adjusting LNA parameters\n"); |
| 791 | if (type != V4L2_TUNER_ANALOG_TV) { |
| 792 | /* LNA TOP: lowest */ |
| 793 | rc = r820t_write_reg_mask(priv, 0x1d, 0, 0x38); |
| 794 | if (rc < 0) |
| 795 | return rc; |
| 796 | |
| 797 | /* 0: normal mode */ |
| 798 | rc = r820t_write_reg_mask(priv, 0x1c, 0, 0x04); |
| 799 | if (rc < 0) |
| 800 | return rc; |
| 801 | |
| 802 | /* 0: PRE_DECT off */ |
| 803 | rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40); |
| 804 | if (rc < 0) |
| 805 | return rc; |
| 806 | |
| 807 | /* agc clk 250hz */ |
| 808 | rc = r820t_write_reg_mask(priv, 0x1a, 0x30, 0x30); |
| 809 | if (rc < 0) |
| 810 | return rc; |
| 811 | |
| 812 | msleep(250); |
| 813 | |
| 814 | /* write LNA TOP = 3 */ |
| 815 | rc = r820t_write_reg_mask(priv, 0x1d, 0x18, 0x38); |
| 816 | if (rc < 0) |
| 817 | return rc; |
| 818 | |
| 819 | /* |
| 820 | * write discharge mode |
| 821 | * FIXME: IMHO, the mask here is wrong, but it matches |
| 822 | * what's there at the original driver |
| 823 | */ |
| 824 | rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04); |
| 825 | if (rc < 0) |
| 826 | return rc; |
| 827 | |
| 828 | /* LNA discharge current */ |
| 829 | rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f); |
| 830 | if (rc < 0) |
| 831 | return rc; |
| 832 | |
| 833 | /* agc clk 60hz */ |
| 834 | rc = r820t_write_reg_mask(priv, 0x1a, 0x20, 0x30); |
| 835 | if (rc < 0) |
| 836 | return rc; |
| 837 | } else { |
| 838 | /* PRE_DECT off */ |
| 839 | rc = r820t_write_reg_mask(priv, 0x06, 0, 0x40); |
| 840 | if (rc < 0) |
| 841 | return rc; |
| 842 | |
| 843 | /* write LNA TOP */ |
| 844 | rc = r820t_write_reg_mask(priv, 0x1d, lna_top, 0x38); |
| 845 | if (rc < 0) |
| 846 | return rc; |
| 847 | |
| 848 | /* |
| 849 | * write discharge mode |
| 850 | * FIXME: IMHO, the mask here is wrong, but it matches |
| 851 | * what's there at the original driver |
| 852 | */ |
| 853 | rc = r820t_write_reg_mask(priv, 0x1c, mixer_top, 0x04); |
| 854 | if (rc < 0) |
| 855 | return rc; |
| 856 | |
| 857 | /* LNA discharge current */ |
| 858 | rc = r820t_write_reg_mask(priv, 0x1e, lna_discharge, 0x1f); |
| 859 | if (rc < 0) |
| 860 | return rc; |
| 861 | |
| 862 | /* agc clk 1Khz, external det1 cap 1u */ |
| 863 | rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x30); |
| 864 | if (rc < 0) |
| 865 | return rc; |
| 866 | |
| 867 | rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x04); |
| 868 | if (rc < 0) |
| 869 | return rc; |
| 870 | } |
| 871 | return 0; |
| 872 | } |
| 873 | |
| 874 | static int r820t_set_tv_standard(struct r820t_priv *priv, |
| 875 | unsigned bw, |
| 876 | enum v4l2_tuner_type type, |
| 877 | v4l2_std_id std, u32 delsys) |
| 878 | |
| 879 | { |
| 880 | int rc, i; |
| 881 | u32 if_khz, filt_cal_lo; |
| 882 | u8 data[5], val; |
| 883 | u8 filt_gain, img_r, filt_q, hp_cor, ext_enable, loop_through; |
| 884 | u8 lt_att, flt_ext_widest, polyfil_cur; |
| 885 | bool need_calibration; |
| 886 | |
| 887 | tuner_dbg("selecting the delivery system\n"); |
| 888 | |
| 889 | if (delsys == SYS_ISDBT) { |
| 890 | if_khz = 4063; |
| 891 | filt_cal_lo = 59000; |
| 892 | filt_gain = 0x10; /* +3db, 6mhz on */ |
| 893 | img_r = 0x00; /* image negative */ |
| 894 | filt_q = 0x10; /* r10[4]:low q(1'b1) */ |
| 895 | hp_cor = 0x6a; /* 1.7m disable, +2cap, 1.25mhz */ |
| 896 | ext_enable = 0x40; /* r30[6], ext enable; r30[5]:0 ext at lna max */ |
| 897 | loop_through = 0x00; /* r5[7], lt on */ |
| 898 | lt_att = 0x00; /* r31[7], lt att enable */ |
| 899 | flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ |
| 900 | polyfil_cur = 0x60; /* r25[6:5]:min */ |
| 901 | } else { |
| 902 | if (bw <= 6) { |
| 903 | if_khz = 3570; |
| 904 | filt_cal_lo = 56000; /* 52000->56000 */ |
| 905 | filt_gain = 0x10; /* +3db, 6mhz on */ |
| 906 | img_r = 0x00; /* image negative */ |
| 907 | filt_q = 0x10; /* r10[4]:low q(1'b1) */ |
| 908 | hp_cor = 0x6b; /* 1.7m disable, +2cap, 1.0mhz */ |
| 909 | ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ |
| 910 | loop_through = 0x00; /* r5[7], lt on */ |
| 911 | lt_att = 0x00; /* r31[7], lt att enable */ |
| 912 | flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ |
| 913 | polyfil_cur = 0x60; /* r25[6:5]:min */ |
| 914 | } else if (bw == 7) { |
| 915 | if_khz = 4070; |
| 916 | filt_cal_lo = 60000; |
| 917 | filt_gain = 0x10; /* +3db, 6mhz on */ |
| 918 | img_r = 0x00; /* image negative */ |
| 919 | filt_q = 0x10; /* r10[4]:low q(1'b1) */ |
| 920 | hp_cor = 0x2b; /* 1.7m disable, +1cap, 1.0mhz */ |
| 921 | ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ |
| 922 | loop_through = 0x00; /* r5[7], lt on */ |
| 923 | lt_att = 0x00; /* r31[7], lt att enable */ |
| 924 | flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ |
| 925 | polyfil_cur = 0x60; /* r25[6:5]:min */ |
| 926 | #if 0 /* 7 MHz type 2 - nor sure why/where this is used - Perhaps Australia? */ |
| 927 | if_khz = 4570; |
| 928 | filt_cal_lo = 63000; |
| 929 | filt_gain = 0x10; /* +3db, 6mhz on */ |
| 930 | img_r = 0x00; /* image negative */ |
| 931 | filt_q = 0x10; /* r10[4]:low q(1'b1) */ |
| 932 | hp_cor = 0x2a; /* 1.7m disable, +1cap, 1.25mhz */ |
| 933 | ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ |
| 934 | loop_through = 0x00; /* r5[7], lt on */ |
| 935 | lt_att = 0x00; /* r31[7], lt att enable */ |
| 936 | flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ |
| 937 | polyfil_cur = 0x60; /* r25[6:5]:min */ |
| 938 | #endif |
| 939 | } else { |
| 940 | if_khz = 4570; |
| 941 | filt_cal_lo = 68500; |
| 942 | filt_gain = 0x10; /* +3db, 6mhz on */ |
| 943 | img_r = 0x00; /* image negative */ |
| 944 | filt_q = 0x10; /* r10[4]:low q(1'b1) */ |
| 945 | hp_cor = 0x0b; /* 1.7m disable, +0cap, 1.0mhz */ |
| 946 | ext_enable = 0x60; /* r30[6]=1 ext enable; r30[5]:1 ext at lna max-1 */ |
| 947 | loop_through = 0x00; /* r5[7], lt on */ |
| 948 | lt_att = 0x00; /* r31[7], lt att enable */ |
| 949 | flt_ext_widest = 0x00; /* r15[7]: flt_ext_wide off */ |
| 950 | polyfil_cur = 0x60; /* r25[6:5]:min */ |
| 951 | } |
| 952 | } |
| 953 | |
| 954 | /* Initialize the shadow registers */ |
| 955 | memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); |
| 956 | |
| 957 | /* Init Flag & Xtal_check Result */ |
| 958 | if (priv->imr_done) |
| 959 | val = 1 | priv->xtal_cap_sel << 1; |
| 960 | else |
| 961 | val = 0; |
| 962 | rc = r820t_write_reg_mask(priv, 0x0c, val, 0x0f); |
| 963 | if (rc < 0) |
| 964 | return rc; |
| 965 | |
| 966 | /* version */ |
| 967 | rc = r820t_write_reg_mask(priv, 0x13, VER_NUM, 0x3f); |
| 968 | if (rc < 0) |
| 969 | return rc; |
| 970 | |
| 971 | /* for LT Gain test */ |
| 972 | if (type != V4L2_TUNER_ANALOG_TV) { |
| 973 | rc = r820t_write_reg_mask(priv, 0x1d, 0x00, 0x38); |
| 974 | if (rc < 0) |
| 975 | return rc; |
| 976 | msleep(1); |
| 977 | } |
Mauro Carvalho Chehab | f60f5bc | 2013-04-09 18:46:10 -0300 | [diff] [blame] | 978 | priv->int_freq = if_khz * 1000; |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 979 | |
| 980 | /* Check if standard changed. If so, filter calibration is needed */ |
| 981 | if (type != priv->type) |
| 982 | need_calibration = true; |
| 983 | else if ((type == V4L2_TUNER_ANALOG_TV) && (std != priv->std)) |
| 984 | need_calibration = true; |
| 985 | else if ((type == V4L2_TUNER_DIGITAL_TV) && |
| 986 | ((delsys != priv->delsys) || bw != priv->bw)) |
| 987 | need_calibration = true; |
| 988 | else |
| 989 | need_calibration = false; |
| 990 | |
| 991 | if (need_calibration) { |
| 992 | tuner_dbg("calibrating the tuner\n"); |
| 993 | for (i = 0; i < 2; i++) { |
| 994 | /* Set filt_cap */ |
| 995 | rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x60); |
| 996 | if (rc < 0) |
| 997 | return rc; |
| 998 | |
| 999 | /* set cali clk =on */ |
| 1000 | rc = r820t_write_reg_mask(priv, 0x0f, 0x04, 0x04); |
| 1001 | if (rc < 0) |
| 1002 | return rc; |
| 1003 | |
| 1004 | /* X'tal cap 0pF for PLL */ |
| 1005 | rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x03); |
| 1006 | if (rc < 0) |
| 1007 | return rc; |
| 1008 | |
| 1009 | rc = r820t_set_pll(priv, filt_cal_lo); |
| 1010 | if (rc < 0 || !priv->has_lock) |
| 1011 | return rc; |
| 1012 | |
| 1013 | /* Start Trigger */ |
| 1014 | rc = r820t_write_reg_mask(priv, 0x0b, 0x10, 0x10); |
| 1015 | if (rc < 0) |
| 1016 | return rc; |
| 1017 | |
| 1018 | msleep(1); |
| 1019 | |
| 1020 | /* Stop Trigger */ |
| 1021 | rc = r820t_write_reg_mask(priv, 0x0b, 0x00, 0x10); |
| 1022 | if (rc < 0) |
| 1023 | return rc; |
| 1024 | |
| 1025 | /* set cali clk =off */ |
| 1026 | rc = r820t_write_reg_mask(priv, 0x0f, 0x00, 0x04); |
| 1027 | if (rc < 0) |
| 1028 | return rc; |
| 1029 | |
| 1030 | /* Check if calibration worked */ |
| 1031 | rc = r820_read(priv, 0x00, data, sizeof(data)); |
| 1032 | if (rc < 0) |
| 1033 | return rc; |
| 1034 | |
| 1035 | priv->fil_cal_code = data[4] & 0x0f; |
| 1036 | if (priv->fil_cal_code && priv->fil_cal_code != 0x0f) |
| 1037 | break; |
| 1038 | } |
| 1039 | /* narrowest */ |
| 1040 | if (priv->fil_cal_code == 0x0f) |
| 1041 | priv->fil_cal_code = 0; |
| 1042 | } |
| 1043 | |
| 1044 | rc = r820t_write_reg_mask(priv, 0x0a, |
| 1045 | filt_q | priv->fil_cal_code, 0x1f); |
| 1046 | if (rc < 0) |
| 1047 | return rc; |
| 1048 | |
| 1049 | /* Set BW, Filter_gain, & HP corner */ |
| 1050 | rc = r820t_write_reg_mask(priv, 0x0b, hp_cor, 0x10); |
| 1051 | if (rc < 0) |
| 1052 | return rc; |
| 1053 | |
| 1054 | |
| 1055 | /* Set Img_R */ |
| 1056 | rc = r820t_write_reg_mask(priv, 0x07, img_r, 0x80); |
| 1057 | if (rc < 0) |
| 1058 | return rc; |
| 1059 | |
| 1060 | /* Set filt_3dB, V6MHz */ |
| 1061 | rc = r820t_write_reg_mask(priv, 0x06, filt_gain, 0x30); |
| 1062 | if (rc < 0) |
| 1063 | return rc; |
| 1064 | |
| 1065 | /* channel filter extension */ |
| 1066 | rc = r820t_write_reg_mask(priv, 0x1e, ext_enable, 0x60); |
| 1067 | if (rc < 0) |
| 1068 | return rc; |
| 1069 | |
| 1070 | /* Loop through */ |
| 1071 | rc = r820t_write_reg_mask(priv, 0x05, loop_through, 0x80); |
| 1072 | if (rc < 0) |
| 1073 | return rc; |
| 1074 | |
| 1075 | /* Loop through attenuation */ |
| 1076 | rc = r820t_write_reg_mask(priv, 0x1f, lt_att, 0x80); |
| 1077 | if (rc < 0) |
| 1078 | return rc; |
| 1079 | |
| 1080 | /* filter extension widest */ |
| 1081 | rc = r820t_write_reg_mask(priv, 0x0f, flt_ext_widest, 0x80); |
| 1082 | if (rc < 0) |
| 1083 | return rc; |
| 1084 | |
| 1085 | /* RF poly filter current */ |
| 1086 | rc = r820t_write_reg_mask(priv, 0x19, polyfil_cur, 0x60); |
| 1087 | if (rc < 0) |
| 1088 | return rc; |
| 1089 | |
| 1090 | /* Store current standard. If it changes, re-calibrate the tuner */ |
| 1091 | priv->delsys = delsys; |
| 1092 | priv->type = type; |
| 1093 | priv->std = std; |
| 1094 | priv->bw = bw; |
| 1095 | |
| 1096 | return 0; |
| 1097 | } |
| 1098 | |
Mauro Carvalho Chehab | f8fde0e | 2013-04-07 18:12:56 -0300 | [diff] [blame] | 1099 | static int r820t_read_gain(struct r820t_priv *priv) |
| 1100 | { |
| 1101 | u8 data[4]; |
| 1102 | int rc; |
| 1103 | |
| 1104 | rc = r820_read(priv, 0x00, data, sizeof(data)); |
| 1105 | if (rc < 0) |
| 1106 | return rc; |
| 1107 | |
| 1108 | return ((data[3] & 0x0f) << 1) + ((data[3] & 0xf0) >> 4); |
| 1109 | } |
| 1110 | |
Mauro Carvalho Chehab | 50786dd | 2013-04-07 18:33:13 -0300 | [diff] [blame] | 1111 | static int r820t_set_gain_mode(struct r820t_priv *priv, |
| 1112 | bool set_manual_gain, |
| 1113 | int gain) |
| 1114 | { |
| 1115 | int rc; |
| 1116 | |
| 1117 | if (set_manual_gain) { |
| 1118 | int i, total_gain = 0; |
| 1119 | uint8_t mix_index = 0, lna_index = 0; |
| 1120 | u8 data[4]; |
| 1121 | |
| 1122 | /* LNA auto off */ |
| 1123 | rc = r820t_write_reg_mask(priv, 0x05, 0x10, 0x10); |
| 1124 | if (rc < 0) |
| 1125 | return rc; |
| 1126 | |
| 1127 | /* Mixer auto off */ |
| 1128 | rc = r820t_write_reg_mask(priv, 0x07, 0, 0x10); |
| 1129 | if (rc < 0) |
| 1130 | return rc; |
| 1131 | |
| 1132 | rc = r820_read(priv, 0x00, data, sizeof(data)); |
| 1133 | if (rc < 0) |
| 1134 | return rc; |
| 1135 | |
| 1136 | /* set fixed VGA gain for now (16.3 dB) */ |
| 1137 | rc = r820t_write_reg_mask(priv, 0x0c, 0x08, 0x9f); |
| 1138 | if (rc < 0) |
| 1139 | return rc; |
| 1140 | |
| 1141 | for (i = 0; i < 15; i++) { |
| 1142 | if (total_gain >= gain) |
| 1143 | break; |
| 1144 | |
| 1145 | total_gain += r820t_lna_gain_steps[++lna_index]; |
| 1146 | |
| 1147 | if (total_gain >= gain) |
| 1148 | break; |
| 1149 | |
| 1150 | total_gain += r820t_mixer_gain_steps[++mix_index]; |
| 1151 | } |
| 1152 | |
| 1153 | /* set LNA gain */ |
| 1154 | rc = r820t_write_reg_mask(priv, 0x05, lna_index, 0x0f); |
| 1155 | if (rc < 0) |
| 1156 | return rc; |
| 1157 | |
| 1158 | /* set Mixer gain */ |
| 1159 | rc = r820t_write_reg_mask(priv, 0x07, mix_index, 0x0f); |
| 1160 | if (rc < 0) |
| 1161 | return rc; |
| 1162 | } else { |
| 1163 | /* LNA */ |
| 1164 | rc = r820t_write_reg_mask(priv, 0x05, 0, 0xef); |
| 1165 | if (rc < 0) |
| 1166 | return rc; |
| 1167 | |
| 1168 | /* Mixer */ |
| 1169 | rc = r820t_write_reg_mask(priv, 0x07, 0x10, 0xef); |
| 1170 | if (rc < 0) |
| 1171 | return rc; |
| 1172 | |
| 1173 | /* set fixed VGA gain for now (26.5 dB) */ |
| 1174 | rc = r820t_write_reg_mask(priv, 0x0c, 0x0b, 0x9f); |
| 1175 | if (rc < 0) |
| 1176 | return rc; |
| 1177 | } |
| 1178 | |
| 1179 | return 0; |
| 1180 | } |
| 1181 | |
| 1182 | |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1183 | static int generic_set_freq(struct dvb_frontend *fe, |
| 1184 | u32 freq /* in HZ */, |
| 1185 | unsigned bw, |
| 1186 | enum v4l2_tuner_type type, |
| 1187 | v4l2_std_id std, u32 delsys) |
| 1188 | { |
| 1189 | struct r820t_priv *priv = fe->tuner_priv; |
| 1190 | int rc = -EINVAL; |
| 1191 | u32 lo_freq; |
| 1192 | |
| 1193 | tuner_dbg("should set frequency to %d kHz, bw %d MHz\n", |
| 1194 | freq / 1000, bw); |
| 1195 | |
Mauro Carvalho Chehab | a7dd065 | 2013-04-09 21:29:40 -0300 | [diff] [blame^] | 1196 | rc = r820t_set_tv_standard(priv, bw, type, std, delsys); |
| 1197 | if (rc < 0) |
| 1198 | goto err; |
| 1199 | |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1200 | if ((type == V4L2_TUNER_ANALOG_TV) && (std == V4L2_STD_SECAM_LC)) |
| 1201 | lo_freq = freq - priv->int_freq; |
| 1202 | else |
| 1203 | lo_freq = freq + priv->int_freq; |
| 1204 | |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1205 | rc = r820t_set_mux(priv, lo_freq); |
| 1206 | if (rc < 0) |
| 1207 | goto err; |
Mauro Carvalho Chehab | 50786dd | 2013-04-07 18:33:13 -0300 | [diff] [blame] | 1208 | |
| 1209 | rc = r820t_set_gain_mode(priv, true, 0); |
| 1210 | if (rc < 0) |
| 1211 | goto err; |
| 1212 | |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1213 | rc = r820t_set_pll(priv, lo_freq); |
| 1214 | if (rc < 0 || !priv->has_lock) |
| 1215 | goto err; |
| 1216 | |
| 1217 | rc = r820t_sysfreq_sel(priv, freq, type, std, delsys); |
Mauro Carvalho Chehab | da31934 | 2013-04-07 19:47:49 -0300 | [diff] [blame] | 1218 | if (rc < 0) |
| 1219 | goto err; |
| 1220 | |
| 1221 | tuner_dbg("%s: PLL locked on frequency %d Hz, gain=%d\n", |
| 1222 | __func__, freq, r820t_read_gain(priv)); |
| 1223 | |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1224 | err: |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1225 | |
| 1226 | if (rc < 0) |
| 1227 | tuner_dbg("%s: failed=%d\n", __func__, rc); |
| 1228 | return rc; |
| 1229 | } |
| 1230 | |
| 1231 | /* |
| 1232 | * r820t standby logic |
| 1233 | */ |
| 1234 | |
| 1235 | static int r820t_standby(struct r820t_priv *priv) |
| 1236 | { |
| 1237 | int rc; |
| 1238 | |
| 1239 | rc = r820t_write_reg(priv, 0x06, 0xb1); |
| 1240 | if (rc < 0) |
| 1241 | return rc; |
| 1242 | rc = r820t_write_reg(priv, 0x05, 0x03); |
| 1243 | if (rc < 0) |
| 1244 | return rc; |
| 1245 | rc = r820t_write_reg(priv, 0x07, 0x3a); |
| 1246 | if (rc < 0) |
| 1247 | return rc; |
| 1248 | rc = r820t_write_reg(priv, 0x08, 0x40); |
| 1249 | if (rc < 0) |
| 1250 | return rc; |
| 1251 | rc = r820t_write_reg(priv, 0x09, 0xc0); |
| 1252 | if (rc < 0) |
| 1253 | return rc; |
| 1254 | rc = r820t_write_reg(priv, 0x0a, 0x36); |
| 1255 | if (rc < 0) |
| 1256 | return rc; |
| 1257 | rc = r820t_write_reg(priv, 0x0c, 0x35); |
| 1258 | if (rc < 0) |
| 1259 | return rc; |
| 1260 | rc = r820t_write_reg(priv, 0x0f, 0x68); |
| 1261 | if (rc < 0) |
| 1262 | return rc; |
| 1263 | rc = r820t_write_reg(priv, 0x11, 0x03); |
| 1264 | if (rc < 0) |
| 1265 | return rc; |
| 1266 | rc = r820t_write_reg(priv, 0x17, 0xf4); |
| 1267 | if (rc < 0) |
| 1268 | return rc; |
| 1269 | rc = r820t_write_reg(priv, 0x19, 0x0c); |
| 1270 | |
| 1271 | /* Force initial calibration */ |
| 1272 | priv->type = -1; |
| 1273 | |
| 1274 | return rc; |
| 1275 | } |
| 1276 | |
| 1277 | /* |
| 1278 | * r820t device init logic |
| 1279 | */ |
| 1280 | |
| 1281 | static int r820t_xtal_check(struct r820t_priv *priv) |
| 1282 | { |
| 1283 | int rc, i; |
| 1284 | u8 data[3], val; |
| 1285 | |
| 1286 | /* Initialize the shadow registers */ |
| 1287 | memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array)); |
| 1288 | |
| 1289 | /* cap 30pF & Drive Low */ |
| 1290 | rc = r820t_write_reg_mask(priv, 0x10, 0x0b, 0x0b); |
| 1291 | if (rc < 0) |
| 1292 | return rc; |
| 1293 | |
| 1294 | /* set pll autotune = 128kHz */ |
| 1295 | rc = r820t_write_reg_mask(priv, 0x1a, 0x00, 0x0c); |
| 1296 | if (rc < 0) |
| 1297 | return rc; |
| 1298 | |
| 1299 | /* set manual initial reg = 111111; */ |
| 1300 | rc = r820t_write_reg_mask(priv, 0x13, 0x7f, 0x7f); |
| 1301 | if (rc < 0) |
| 1302 | return rc; |
| 1303 | |
| 1304 | /* set auto */ |
| 1305 | rc = r820t_write_reg_mask(priv, 0x13, 0x00, 0x40); |
| 1306 | if (rc < 0) |
| 1307 | return rc; |
| 1308 | |
| 1309 | /* Try several xtal capacitor alternatives */ |
| 1310 | for (i = 0; i < ARRAY_SIZE(r820t_xtal_capacitor); i++) { |
| 1311 | rc = r820t_write_reg_mask(priv, 0x10, |
| 1312 | r820t_xtal_capacitor[i][0], 0x1b); |
| 1313 | if (rc < 0) |
| 1314 | return rc; |
| 1315 | |
| 1316 | msleep(5); |
| 1317 | |
| 1318 | rc = r820_read(priv, 0x00, data, sizeof(data)); |
| 1319 | if (rc < 0) |
| 1320 | return rc; |
| 1321 | if ((!data[2]) & 0x40) |
| 1322 | continue; |
| 1323 | |
| 1324 | val = data[2] & 0x3f; |
| 1325 | |
| 1326 | if (priv->cfg->xtal == 16000000 && (val > 29 || val < 23)) |
| 1327 | break; |
| 1328 | |
| 1329 | if (val != 0x3f) |
| 1330 | break; |
| 1331 | } |
| 1332 | |
| 1333 | if (i == ARRAY_SIZE(r820t_xtal_capacitor)) |
| 1334 | return -EINVAL; |
| 1335 | |
| 1336 | return r820t_xtal_capacitor[i][1]; |
| 1337 | } |
| 1338 | |
| 1339 | /* |
| 1340 | * r820t frontend operations and tuner attach code |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1341 | * |
| 1342 | * All driver locks and i2c control are only in this part of the code |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1343 | */ |
| 1344 | |
| 1345 | static int r820t_init(struct dvb_frontend *fe) |
| 1346 | { |
| 1347 | struct r820t_priv *priv = fe->tuner_priv; |
| 1348 | int rc, i; |
| 1349 | int xtal_cap = 0; |
| 1350 | |
| 1351 | tuner_dbg("%s:\n", __func__); |
| 1352 | |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1353 | mutex_lock(&priv->lock); |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1354 | if (fe->ops.i2c_gate_ctrl) |
| 1355 | fe->ops.i2c_gate_ctrl(fe, 1); |
| 1356 | |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1357 | if ((priv->cfg->rafael_chip == CHIP_R820T) || |
| 1358 | (priv->cfg->rafael_chip == CHIP_R828S) || |
| 1359 | (priv->cfg->rafael_chip == CHIP_R820C)) { |
| 1360 | priv->xtal_cap_sel = XTAL_HIGH_CAP_0P; |
| 1361 | } else { |
| 1362 | for (i = 0; i < 3; i++) { |
| 1363 | rc = r820t_xtal_check(priv); |
| 1364 | if (rc < 0) |
| 1365 | goto err; |
| 1366 | if (!i || rc > xtal_cap) |
| 1367 | xtal_cap = rc; |
| 1368 | } |
| 1369 | priv->xtal_cap_sel = xtal_cap; |
| 1370 | } |
| 1371 | |
| 1372 | /* Initialize registers */ |
| 1373 | rc = r820t_write(priv, 0x05, |
| 1374 | r820t_init_array, sizeof(r820t_init_array)); |
| 1375 | |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1376 | err: |
| 1377 | if (fe->ops.i2c_gate_ctrl) |
| 1378 | fe->ops.i2c_gate_ctrl(fe, 0); |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1379 | mutex_unlock(&priv->lock); |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1380 | |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1381 | if (rc < 0) |
| 1382 | tuner_dbg("%s: failed=%d\n", __func__, rc); |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1383 | return rc; |
| 1384 | } |
| 1385 | |
| 1386 | static int r820t_sleep(struct dvb_frontend *fe) |
| 1387 | { |
| 1388 | struct r820t_priv *priv = fe->tuner_priv; |
| 1389 | int rc; |
| 1390 | |
| 1391 | tuner_dbg("%s:\n", __func__); |
| 1392 | |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1393 | mutex_lock(&priv->lock); |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1394 | if (fe->ops.i2c_gate_ctrl) |
| 1395 | fe->ops.i2c_gate_ctrl(fe, 1); |
| 1396 | |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1397 | rc = r820t_standby(priv); |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1398 | |
| 1399 | if (fe->ops.i2c_gate_ctrl) |
| 1400 | fe->ops.i2c_gate_ctrl(fe, 0); |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1401 | mutex_unlock(&priv->lock); |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1402 | |
| 1403 | tuner_dbg("%s: failed=%d\n", __func__, rc); |
| 1404 | return rc; |
| 1405 | } |
| 1406 | |
| 1407 | static int r820t_set_analog_freq(struct dvb_frontend *fe, |
| 1408 | struct analog_parameters *p) |
| 1409 | { |
| 1410 | struct r820t_priv *priv = fe->tuner_priv; |
| 1411 | unsigned bw; |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1412 | int rc; |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1413 | |
| 1414 | tuner_dbg("%s called\n", __func__); |
| 1415 | |
| 1416 | /* if std is not defined, choose one */ |
| 1417 | if (!p->std) |
| 1418 | p->std = V4L2_STD_MN; |
| 1419 | |
| 1420 | if ((p->std == V4L2_STD_PAL_M) || (p->std == V4L2_STD_NTSC)) |
| 1421 | bw = 6; |
| 1422 | else |
| 1423 | bw = 8; |
| 1424 | |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1425 | mutex_lock(&priv->lock); |
| 1426 | if (fe->ops.i2c_gate_ctrl) |
| 1427 | fe->ops.i2c_gate_ctrl(fe, 1); |
| 1428 | |
| 1429 | rc = generic_set_freq(fe, 62500l * p->frequency, bw, |
| 1430 | V4L2_TUNER_ANALOG_TV, p->std, SYS_UNDEFINED); |
| 1431 | |
| 1432 | if (fe->ops.i2c_gate_ctrl) |
| 1433 | fe->ops.i2c_gate_ctrl(fe, 0); |
| 1434 | mutex_unlock(&priv->lock); |
| 1435 | |
| 1436 | return rc; |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1437 | } |
| 1438 | |
| 1439 | static int r820t_set_params(struct dvb_frontend *fe) |
| 1440 | { |
| 1441 | struct r820t_priv *priv = fe->tuner_priv; |
| 1442 | struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| 1443 | int rc; |
| 1444 | unsigned bw; |
| 1445 | |
| 1446 | tuner_dbg("%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n", |
| 1447 | __func__, c->delivery_system, c->frequency, c->bandwidth_hz); |
| 1448 | |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1449 | mutex_lock(&priv->lock); |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1450 | if (fe->ops.i2c_gate_ctrl) |
| 1451 | fe->ops.i2c_gate_ctrl(fe, 1); |
| 1452 | |
| 1453 | bw = (c->bandwidth_hz + 500000) / 1000000; |
| 1454 | if (!bw) |
| 1455 | bw = 8; |
| 1456 | |
| 1457 | rc = generic_set_freq(fe, c->frequency, bw, |
| 1458 | V4L2_TUNER_DIGITAL_TV, 0, c->delivery_system); |
| 1459 | |
| 1460 | if (fe->ops.i2c_gate_ctrl) |
| 1461 | fe->ops.i2c_gate_ctrl(fe, 0); |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1462 | mutex_unlock(&priv->lock); |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1463 | |
| 1464 | if (rc) |
| 1465 | tuner_dbg("%s: failed=%d\n", __func__, rc); |
| 1466 | return rc; |
| 1467 | } |
| 1468 | |
| 1469 | static int r820t_signal(struct dvb_frontend *fe, u16 *strength) |
| 1470 | { |
| 1471 | struct r820t_priv *priv = fe->tuner_priv; |
Mauro Carvalho Chehab | f8fde0e | 2013-04-07 18:12:56 -0300 | [diff] [blame] | 1472 | int rc = 0; |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1473 | |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1474 | mutex_lock(&priv->lock); |
| 1475 | if (fe->ops.i2c_gate_ctrl) |
| 1476 | fe->ops.i2c_gate_ctrl(fe, 1); |
| 1477 | |
Mauro Carvalho Chehab | f8fde0e | 2013-04-07 18:12:56 -0300 | [diff] [blame] | 1478 | if (priv->has_lock) { |
| 1479 | rc = r820t_read_gain(priv); |
| 1480 | if (rc < 0) |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1481 | goto err; |
Mauro Carvalho Chehab | f8fde0e | 2013-04-07 18:12:56 -0300 | [diff] [blame] | 1482 | |
| 1483 | /* A higher gain at LNA means a lower signal strength */ |
| 1484 | *strength = (45 - rc) << 4 | 0xff; |
| 1485 | } else { |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1486 | *strength = 0; |
Mauro Carvalho Chehab | f8fde0e | 2013-04-07 18:12:56 -0300 | [diff] [blame] | 1487 | } |
| 1488 | |
Mauro Carvalho Chehab | 7a5ef30 | 2013-04-07 19:32:55 -0300 | [diff] [blame] | 1489 | err: |
| 1490 | if (fe->ops.i2c_gate_ctrl) |
| 1491 | fe->ops.i2c_gate_ctrl(fe, 0); |
| 1492 | mutex_unlock(&priv->lock); |
| 1493 | |
Mauro Carvalho Chehab | f8fde0e | 2013-04-07 18:12:56 -0300 | [diff] [blame] | 1494 | tuner_dbg("%s: %s, gain=%d strength=%d\n", |
| 1495 | __func__, |
| 1496 | priv->has_lock ? "PLL locked" : "no signal", |
| 1497 | rc, *strength); |
Mauro Carvalho Chehab | a80abc5 | 2013-04-05 14:35:18 -0300 | [diff] [blame] | 1498 | |
| 1499 | return 0; |
| 1500 | } |
| 1501 | |
| 1502 | static int r820t_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) |
| 1503 | { |
| 1504 | struct r820t_priv *priv = fe->tuner_priv; |
| 1505 | |
| 1506 | tuner_dbg("%s:\n", __func__); |
| 1507 | |
| 1508 | *frequency = priv->int_freq; |
| 1509 | |
| 1510 | return 0; |
| 1511 | } |
| 1512 | |
| 1513 | static int r820t_release(struct dvb_frontend *fe) |
| 1514 | { |
| 1515 | struct r820t_priv *priv = fe->tuner_priv; |
| 1516 | |
| 1517 | tuner_dbg("%s:\n", __func__); |
| 1518 | |
| 1519 | mutex_lock(&r820t_list_mutex); |
| 1520 | |
| 1521 | if (priv) |
| 1522 | hybrid_tuner_release_state(priv); |
| 1523 | |
| 1524 | mutex_unlock(&r820t_list_mutex); |
| 1525 | |
| 1526 | fe->tuner_priv = NULL; |
| 1527 | |
| 1528 | kfree(fe->tuner_priv); |
| 1529 | |
| 1530 | return 0; |
| 1531 | } |
| 1532 | |
| 1533 | static const struct dvb_tuner_ops r820t_tuner_ops = { |
| 1534 | .info = { |
| 1535 | .name = "Rafael Micro R820T", |
| 1536 | .frequency_min = 42000000, |
| 1537 | .frequency_max = 1002000000, |
| 1538 | }, |
| 1539 | .init = r820t_init, |
| 1540 | .release = r820t_release, |
| 1541 | .sleep = r820t_sleep, |
| 1542 | .set_params = r820t_set_params, |
| 1543 | .set_analog_params = r820t_set_analog_freq, |
| 1544 | .get_if_frequency = r820t_get_if_frequency, |
| 1545 | .get_rf_strength = r820t_signal, |
| 1546 | }; |
| 1547 | |
| 1548 | struct dvb_frontend *r820t_attach(struct dvb_frontend *fe, |
| 1549 | struct i2c_adapter *i2c, |
| 1550 | const struct r820t_config *cfg) |
| 1551 | { |
| 1552 | struct r820t_priv *priv; |
| 1553 | int rc = -ENODEV; |
| 1554 | u8 data[5]; |
| 1555 | int instance; |
| 1556 | |
| 1557 | mutex_lock(&r820t_list_mutex); |
| 1558 | |
| 1559 | instance = hybrid_tuner_request_state(struct r820t_priv, priv, |
| 1560 | hybrid_tuner_instance_list, |
| 1561 | i2c, cfg->i2c_addr, |
| 1562 | "r820t"); |
| 1563 | switch (instance) { |
| 1564 | case 0: |
| 1565 | /* memory allocation failure */ |
| 1566 | goto err_no_gate; |
| 1567 | break; |
| 1568 | case 1: |
| 1569 | /* new tuner instance */ |
| 1570 | priv->cfg = cfg; |
| 1571 | |
| 1572 | mutex_init(&priv->lock); |
| 1573 | |
| 1574 | fe->tuner_priv = priv; |
| 1575 | break; |
| 1576 | case 2: |
| 1577 | /* existing tuner instance */ |
| 1578 | fe->tuner_priv = priv; |
| 1579 | break; |
| 1580 | } |
| 1581 | |
| 1582 | memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops, sizeof(r820t_tuner_ops)); |
| 1583 | |
| 1584 | if (fe->ops.i2c_gate_ctrl) |
| 1585 | fe->ops.i2c_gate_ctrl(fe, 1); |
| 1586 | |
| 1587 | /* check if the tuner is there */ |
| 1588 | rc = r820_read(priv, 0x00, data, sizeof(data)); |
| 1589 | if (rc < 0) |
| 1590 | goto err; |
| 1591 | |
| 1592 | rc = r820t_sleep(fe); |
| 1593 | if (rc < 0) |
| 1594 | goto err; |
| 1595 | |
| 1596 | tuner_info("Rafael Micro r820t successfully identified\n"); |
| 1597 | |
| 1598 | fe->tuner_priv = priv; |
| 1599 | memcpy(&fe->ops.tuner_ops, &r820t_tuner_ops, |
| 1600 | sizeof(struct dvb_tuner_ops)); |
| 1601 | |
| 1602 | if (fe->ops.i2c_gate_ctrl) |
| 1603 | fe->ops.i2c_gate_ctrl(fe, 0); |
| 1604 | |
| 1605 | mutex_unlock(&r820t_list_mutex); |
| 1606 | |
| 1607 | return fe; |
| 1608 | err: |
| 1609 | if (fe->ops.i2c_gate_ctrl) |
| 1610 | fe->ops.i2c_gate_ctrl(fe, 0); |
| 1611 | |
| 1612 | err_no_gate: |
| 1613 | mutex_unlock(&r820t_list_mutex); |
| 1614 | |
| 1615 | tuner_info("%s: failed=%d\n", __func__, rc); |
| 1616 | r820t_release(fe); |
| 1617 | return NULL; |
| 1618 | } |
| 1619 | EXPORT_SYMBOL_GPL(r820t_attach); |
| 1620 | |
| 1621 | MODULE_DESCRIPTION("Rafael Micro r820t silicon tuner driver"); |
| 1622 | MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); |
| 1623 | MODULE_LICENSE("GPL"); |