blob: edfc5da8be4c05aa5bc729c7ee47fca531bf797f [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * u14-34f.c - Low-level driver for UltraStor 14F/34F SCSI host adapters.
3 *
4 * 03 Jun 2003 Rev. 8.10 for linux-2.5.70
5 * + Update for new IRQ API.
6 * + Use "goto" when appropriate.
7 * + Drop u14-34f.h.
8 * + Update for new module_param API.
9 * + Module parameters can now be specified only in the
10 * same format as the kernel boot options.
11 *
12 * boot option old module param
13 * ----------- ------------------
14 * addr,... io_port=addr,...
15 * lc:[y|n] linked_comm=[1|0]
16 * mq:xx max_queue_depth=xx
17 * tm:[0|1|2] tag_mode=[0|1|2]
18 * et:[y|n] ext_tran=[1|0]
19 * of:[y|n] have_old_firmware=[1|0]
20 *
21 * A valid example using the new parameter format is:
22 * modprobe u14-34f "u14-34f=0x340,0x330,lc:y,tm:0,mq:4"
23 *
24 * which is equivalent to the old format:
25 * modprobe u14-34f io_port=0x340,0x330 linked_comm=1 tag_mode=0 \
26 * max_queue_depth=4
27 *
28 * With actual module code, u14-34f and u14_34f are equivalent
29 * as module parameter names.
30 *
31 * 12 Feb 2003 Rev. 8.04 for linux 2.5.60
32 * + Release irq before calling scsi_register.
33 *
34 * 12 Nov 2002 Rev. 8.02 for linux 2.5.47
35 * + Release driver_lock before calling scsi_register.
36 *
37 * 11 Nov 2002 Rev. 8.01 for linux 2.5.47
38 * + Fixed bios_param and scsicam_bios_param calling parameters.
39 *
40 * 28 Oct 2002 Rev. 8.00 for linux 2.5.44-ac4
41 * + Use new tcq and adjust_queue_depth api.
42 * + New command line option (tm:[0-2]) to choose the type of tags:
43 * 0 -> disable tagging ; 1 -> simple tags ; 2 -> ordered tags.
44 * Default is tm:0 (tagged commands disabled).
45 * For compatibility the "tc:" option is an alias of the "tm:"
46 * option; tc:n is equivalent to tm:0 and tc:y is equivalent to
47 * tm:1.
48 *
49 * 10 Oct 2002 Rev. 7.70 for linux 2.5.42
50 * + Foreport from revision 6.70.
51 *
52 * 25 Jun 2002 Rev. 6.70 for linux 2.4.19
53 * + Fixed endian-ness problem due to bitfields.
54 *
55 * 21 Feb 2002 Rev. 6.52 for linux 2.4.18
56 * + Backport from rev. 7.22 (use io_request_lock).
57 *
58 * 20 Feb 2002 Rev. 7.22 for linux 2.5.5
59 * + Remove any reference to virt_to_bus().
60 * + Fix pio hang while detecting multiple HBAs.
61 *
62 * 01 Jan 2002 Rev. 7.20 for linux 2.5.1
63 * + Use the dynamic DMA mapping API.
64 *
65 * 19 Dec 2001 Rev. 7.02 for linux 2.5.1
66 * + Use SCpnt->sc_data_direction if set.
67 * + Use sglist.page instead of sglist.address.
68 *
69 * 11 Dec 2001 Rev. 7.00 for linux 2.5.1
70 * + Use host->host_lock instead of io_request_lock.
71 *
72 * 1 May 2001 Rev. 6.05 for linux 2.4.4
73 * + Fix data transfer direction for opcode SEND_CUE_SHEET (0x5d)
74 *
75 * 25 Jan 2001 Rev. 6.03 for linux 2.4.0
76 * + "check_region" call replaced by "request_region".
77 *
78 * 22 Nov 2000 Rev. 6.02 for linux 2.4.0-test11
79 * + Removed old scsi error handling support.
80 * + The obsolete boot option flag eh:n is silently ignored.
81 * + Removed error messages while a disk drive is powered up at
82 * boot time.
83 * + Improved boot messages: all tagged capable device are
84 * indicated as "tagged".
85 *
86 * 16 Sep 1999 Rev. 5.11 for linux 2.2.12 and 2.3.18
87 * + Updated to the new __setup interface for boot command line options.
88 * + When loaded as a module, accepts the new parameter boot_options
89 * which value is a string with the same format of the kernel boot
90 * command line options. A valid example is:
91 * modprobe u14-34f 'boot_options="0x230,0x340,lc:y,mq:4"'
92 *
93 * 22 Jul 1999 Rev. 5.00 for linux 2.2.10 and 2.3.11
94 * + Removed pre-2.2 source code compatibility.
95 *
96 * 26 Jul 1998 Rev. 4.33 for linux 2.0.35 and 2.1.111
97 * Added command line option (et:[y|n]) to use the existing
98 * translation (returned by scsicam_bios_param) as disk geometry.
99 * The default is et:n, which uses the disk geometry jumpered
100 * on the board.
101 * The default value et:n is compatible with all previous revisions
102 * of this driver.
103 *
104 * 28 May 1998 Rev. 4.32 for linux 2.0.33 and 2.1.104
105 * Increased busy timeout from 10 msec. to 200 msec. while
106 * processing interrupts.
107 *
108 * 18 May 1998 Rev. 4.31 for linux 2.0.33 and 2.1.102
109 * Improved abort handling during the eh recovery process.
110 *
111 * 13 May 1998 Rev. 4.30 for linux 2.0.33 and 2.1.101
112 * The driver is now fully SMP safe, including the
113 * abort and reset routines.
114 * Added command line options (eh:[y|n]) to choose between
115 * new_eh_code and the old scsi code.
116 * If linux version >= 2.1.101 the default is eh:y, while the eh
117 * option is ignored for previous releases and the old scsi code
118 * is used.
119 *
120 * 18 Apr 1998 Rev. 4.20 for linux 2.0.33 and 2.1.97
121 * Reworked interrupt handler.
122 *
123 * 11 Apr 1998 rev. 4.05 for linux 2.0.33 and 2.1.95
124 * Major reliability improvement: when a batch with overlapping
125 * requests is detected, requests are queued one at a time
126 * eliminating any possible board or drive reordering.
127 *
128 * 10 Apr 1998 rev. 4.04 for linux 2.0.33 and 2.1.95
129 * Improved SMP support (if linux version >= 2.1.95).
130 *
131 * 9 Apr 1998 rev. 4.03 for linux 2.0.33 and 2.1.94
132 * Performance improvement: when sequential i/o is detected,
133 * always use direct sort instead of reverse sort.
134 *
135 * 4 Apr 1998 rev. 4.02 for linux 2.0.33 and 2.1.92
136 * io_port is now unsigned long.
137 *
138 * 17 Mar 1998 rev. 4.01 for linux 2.0.33 and 2.1.88
139 * Use new scsi error handling code (if linux version >= 2.1.88).
140 * Use new interrupt code.
141 *
142 * 12 Sep 1997 rev. 3.11 for linux 2.0.30 and 2.1.55
143 * Use of udelay inside the wait loops to avoid timeout
144 * problems with fast cpus.
145 * Removed check about useless calls to the interrupt service
146 * routine (reported on SMP systems only).
147 * At initialization time "sorted/unsorted" is displayed instead
148 * of "linked/unlinked" to reinforce the fact that "linking" is
149 * nothing but "elevator sorting" in the actual implementation.
150 *
151 * 17 May 1997 rev. 3.10 for linux 2.0.30 and 2.1.38
152 * Use of serial_number_at_timeout in abort and reset processing.
153 * Use of the __initfunc and __initdata macro in setup code.
154 * Minor cleanups in the list_statistics code.
155 *
156 * 24 Feb 1997 rev. 3.00 for linux 2.0.29 and 2.1.26
157 * When loading as a module, parameter passing is now supported
158 * both in 2.0 and in 2.1 style.
159 * Fixed data transfer direction for some SCSI opcodes.
160 * Immediate acknowledge to request sense commands.
161 * Linked commands to each disk device are now reordered by elevator
162 * sorting. Rare cases in which reordering of write requests could
163 * cause wrong results are managed.
164 *
165 * 18 Jan 1997 rev. 2.60 for linux 2.1.21 and 2.0.28
166 * Added command line options to enable/disable linked commands
167 * (lc:[y|n]), old firmware support (of:[y|n]) and to set the max
168 * queue depth (mq:xx). Default is "u14-34f=lc:n,of:n,mq:8".
169 * Improved command linking.
170 *
171 * 8 Jan 1997 rev. 2.50 for linux 2.1.20 and 2.0.27
172 * Added linked command support.
173 *
174 * 3 Dec 1996 rev. 2.40 for linux 2.1.14 and 2.0.27
175 * Added queue depth adjustment.
176 *
177 * 22 Nov 1996 rev. 2.30 for linux 2.1.12 and 2.0.26
178 * The list of i/o ports to be probed can be overwritten by the
179 * "u14-34f=port0,port1,...." boot command line option.
180 * Scatter/gather lists are now allocated by a number of kmalloc
181 * calls, in order to avoid the previous size limit of 64Kb.
182 *
183 * 16 Nov 1996 rev. 2.20 for linux 2.1.10 and 2.0.25
184 * Added multichannel support.
185 *
186 * 27 Sep 1996 rev. 2.12 for linux 2.1.0
187 * Portability cleanups (virtual/bus addressing, little/big endian
188 * support).
189 *
190 * 09 Jul 1996 rev. 2.11 for linux 2.0.4
191 * "Data over/under-run" no longer implies a redo on all targets.
192 * Number of internal retries is now limited.
193 *
194 * 16 Apr 1996 rev. 2.10 for linux 1.3.90
195 * New argument "reset_flags" to the reset routine.
196 *
197 * 21 Jul 1995 rev. 2.02 for linux 1.3.11
198 * Fixed Data Transfer Direction for some SCSI commands.
199 *
200 * 13 Jun 1995 rev. 2.01 for linux 1.2.10
201 * HAVE_OLD_UX4F_FIRMWARE should be defined for U34F boards when
202 * the firmware prom is not the latest one (28008-006).
203 *
204 * 11 Mar 1995 rev. 2.00 for linux 1.2.0
205 * Fixed a bug which prevented media change detection for removable
206 * disk drives.
207 *
208 * 23 Feb 1995 rev. 1.18 for linux 1.1.94
209 * Added a check for scsi_register returning NULL.
210 *
211 * 11 Feb 1995 rev. 1.17 for linux 1.1.91
212 * U14F qualified to run with 32 sglists.
213 * Now DEBUG_RESET is disabled by default.
214 *
215 * 9 Feb 1995 rev. 1.16 for linux 1.1.90
216 * Use host->wish_block instead of host->block.
217 *
218 * 8 Feb 1995 rev. 1.15 for linux 1.1.89
219 * Cleared target_time_out counter while performing a reset.
220 *
221 * 28 Jan 1995 rev. 1.14 for linux 1.1.86
222 * Added module support.
223 * Log and do a retry when a disk drive returns a target status
224 * different from zero on a recovered error.
225 * Auto detects if U14F boards have an old firmware revision.
226 * Max number of scatter/gather lists set to 16 for all boards
227 * (most installation run fine using 33 sglists, while other
228 * has problems when using more than 16).
229 *
230 * 16 Jan 1995 rev. 1.13 for linux 1.1.81
231 * Display a message if check_region detects a port address
232 * already in use.
233 *
234 * 15 Dec 1994 rev. 1.12 for linux 1.1.74
235 * The host->block flag is set for all the detected ISA boards.
236 *
237 * 30 Nov 1994 rev. 1.11 for linux 1.1.68
238 * Redo i/o on target status CHECK_CONDITION for TYPE_DISK only.
239 * Added optional support for using a single board at a time.
240 *
241 * 14 Nov 1994 rev. 1.10 for linux 1.1.63
242 *
243 * 28 Oct 1994 rev. 1.09 for linux 1.1.58 Final BETA release.
244 * 16 Jul 1994 rev. 1.00 for linux 1.1.29 Initial ALPHA release.
245 *
246 * This driver is a total replacement of the original UltraStor
247 * scsi driver, but it supports ONLY the 14F and 34F boards.
248 * It can be configured in the same kernel in which the original
249 * ultrastor driver is configured to allow the original U24F
250 * support.
251 *
252 * Multiple U14F and/or U34F host adapters are supported.
253 *
254 * Copyright (C) 1994-2003 Dario Ballabio (ballabio_dario@emc.com)
255 *
256 * Alternate email: dario.ballabio@inwind.it, dario.ballabio@tiscalinet.it
257 *
258 * Redistribution and use in source and binary forms, with or without
259 * modification, are permitted provided that redistributions of source
260 * code retain the above copyright notice and this comment without
261 * modification.
262 *
263 * WARNING: if your 14/34F board has an old firmware revision (see below)
264 * you must change "#undef" into "#define" in the following
265 * statement.
266 */
267#undef HAVE_OLD_UX4F_FIRMWARE
268/*
269 * The UltraStor 14F, 24F, and 34F are a family of intelligent, high
270 * performance SCSI-2 host adapters.
271 * Here is the scoop on the various models:
272 *
273 * 14F - ISA first-party DMA HA with floppy support and WD1003 emulation.
274 * 24F - EISA Bus Master HA with floppy support and WD1003 emulation.
275 * 34F - VESA Local-Bus Bus Master HA (no WD1003 emulation).
276 *
277 * This code has been tested with up to two U14F boards, using both
278 * firmware 28004-005/38004-004 (BIOS rev. 2.00) and the latest firmware
279 * 28004-006/38004-005 (BIOS rev. 2.01).
280 *
281 * The latest firmware is required in order to get reliable operations when
282 * clustering is enabled. ENABLE_CLUSTERING provides a performance increase
283 * up to 50% on sequential access.
284 *
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100285 * Since the struct scsi_host_template structure is shared among all 14F and 34F,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286 * the last setting of use_clustering is in effect for all of these boards.
287 *
288 * Here a sample configuration using two U14F boards:
289 *
290 U14F0: ISA 0x330, BIOS 0xc8000, IRQ 11, DMA 5, SG 32, MB 16, of:n, lc:y, mq:8.
291 U14F1: ISA 0x340, BIOS 0x00000, IRQ 10, DMA 6, SG 32, MB 16, of:n, lc:y, mq:8.
292 *
293 * The boot controller must have its BIOS enabled, while other boards can
294 * have their BIOS disabled, or enabled to an higher address.
295 * Boards are named Ux4F0, Ux4F1..., according to the port address order in
296 * the io_port[] array.
297 *
298 * The following facts are based on real testing results (not on
299 * documentation) on the above U14F board.
300 *
301 * - The U14F board should be jumpered for bus on time less or equal to 7
302 * microseconds, while the default is 11 microseconds. This is order to
303 * get acceptable performance while using floppy drive and hard disk
304 * together. The jumpering for 7 microseconds is: JP13 pin 15-16,
305 * JP14 pin 7-8 and pin 9-10.
306 * The reduction has a little impact on scsi performance.
307 *
308 * - If scsi bus length exceeds 3m., the scsi bus speed needs to be reduced
309 * from 10Mhz to 5Mhz (do this by inserting a jumper on JP13 pin 7-8).
310 *
311 * - If U14F on board firmware is older than 28004-006/38004-005,
312 * the U14F board is unable to provide reliable operations if the scsi
313 * request length exceeds 16Kbyte. When this length is exceeded the
314 * behavior is:
315 * - adapter_status equal 0x96 or 0xa3 or 0x93 or 0x94;
316 * - adapter_status equal 0 and target_status equal 2 on for all targets
317 * in the next operation following the reset.
318 * This sequence takes a long time (>3 seconds), so in the meantime
319 * the SD_TIMEOUT in sd.c could expire giving rise to scsi aborts
320 * (SD_TIMEOUT has been increased from 3 to 6 seconds in 1.1.31).
321 * Because of this I had to DISABLE_CLUSTERING and to work around the
322 * bus reset in the interrupt service routine, returning DID_BUS_BUSY
323 * so that the operations are retried without complains from the scsi.c
324 * code.
325 * Any reset of the scsi bus is going to kill tape operations, since
326 * no retry is allowed for tapes. Bus resets are more likely when the
327 * scsi bus is under heavy load.
328 * Requests using scatter/gather have a maximum length of 16 x 1024 bytes
329 * when DISABLE_CLUSTERING is in effect, but unscattered requests could be
330 * larger than 16Kbyte.
331 *
332 * The new firmware has fixed all the above problems.
333 *
334 * For U34F boards the latest bios prom is 38008-002 (BIOS rev. 2.01),
335 * the latest firmware prom is 28008-006. Older firmware 28008-005 has
336 * problems when using more than 16 scatter/gather lists.
337 *
338 * The list of i/o ports to be probed can be totally replaced by the
339 * boot command line option: "u14-34f=port0,port1,port2,...", where the
340 * port0, port1... arguments are ISA/VESA addresses to be probed.
341 * For example using "u14-34f=0x230,0x340", the driver probes only the two
342 * addresses 0x230 and 0x340 in this order; "u14-34f=0" totally disables
343 * this driver.
344 *
345 * After the optional list of detection probes, other possible command line
346 * options are:
347 *
348 * et:y use disk geometry returned by scsicam_bios_param;
349 * et:n use disk geometry jumpered on the board;
350 * lc:y enables linked commands;
351 * lc:n disables linked commands;
352 * tm:0 disables tagged commands (same as tc:n);
353 * tm:1 use simple queue tags (same as tc:y);
354 * tm:2 use ordered queue tags (same as tc:2);
355 * of:y enables old firmware support;
356 * of:n disables old firmware support;
357 * mq:xx set the max queue depth to the value xx (2 <= xx <= 8).
358 *
359 * The default value is: "u14-34f=lc:n,of:n,mq:8,tm:0,et:n".
360 * An example using the list of detection probes could be:
361 * "u14-34f=0x230,0x340,lc:y,tm:2,of:n,mq:4,et:n".
362 *
363 * When loading as a module, parameters can be specified as well.
364 * The above example would be (use 1 in place of y and 0 in place of n):
365 *
366 * modprobe u14-34f io_port=0x230,0x340 linked_comm=1 have_old_firmware=0 \
367 * max_queue_depth=4 ext_tran=0 tag_mode=2
368 *
369 * ----------------------------------------------------------------------------
370 * In this implementation, linked commands are designed to work with any DISK
371 * or CD-ROM, since this linking has only the intent of clustering (time-wise)
372 * and reordering by elevator sorting commands directed to each device,
373 * without any relation with the actual SCSI protocol between the controller
374 * and the device.
375 * If Q is the queue depth reported at boot time for each device (also named
376 * cmds/lun) and Q > 2, whenever there is already an active command to the
377 * device all other commands to the same device (up to Q-1) are kept waiting
378 * in the elevator sorting queue. When the active command completes, the
379 * commands in this queue are sorted by sector address. The sort is chosen
380 * between increasing or decreasing by minimizing the seek distance between
381 * the sector of the commands just completed and the sector of the first
382 * command in the list to be sorted.
383 * Trivial math assures that the unsorted average seek distance when doing
384 * random seeks over S sectors is S/3.
385 * When (Q-1) requests are uniformly distributed over S sectors, the average
386 * distance between two adjacent requests is S/((Q-1) + 1), so the sorted
387 * average seek distance for (Q-1) random requests over S sectors is S/Q.
388 * The elevator sorting hence divides the seek distance by a factor Q/3.
389 * The above pure geometric remarks are valid in all cases and the
390 * driver effectively reduces the seek distance by the predicted factor
391 * when there are Q concurrent read i/o operations on the device, but this
392 * does not necessarily results in a noticeable performance improvement:
393 * your mileage may vary....
394 *
395 * Note: command reordering inside a batch of queued commands could cause
396 * wrong results only if there is at least one write request and the
397 * intersection (sector-wise) of all requests is not empty.
398 * When the driver detects a batch including overlapping requests
399 * (a really rare event) strict serial (pid) order is enforced.
400 * ----------------------------------------------------------------------------
401 *
402 * The boards are named Ux4F0, Ux4F1,... according to the detection order.
403 *
404 * In order to support multiple ISA boards in a reliable way,
405 * the driver sets host->wish_block = TRUE for all ISA boards.
406 */
407
Linus Torvalds1da177e2005-04-16 15:20:36 -0700408#include <linux/string.h>
409#include <linux/kernel.h>
410#include <linux/ioport.h>
411#include <linux/delay.h>
412#include <asm/io.h>
413#include <asm/system.h>
414#include <asm/byteorder.h>
415#include <linux/proc_fs.h>
416#include <linux/blkdev.h>
417#include <linux/interrupt.h>
418#include <linux/stat.h>
419#include <linux/pci.h>
420#include <linux/init.h>
421#include <linux/ctype.h>
422#include <linux/spinlock.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +0900423#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424#include <asm/dma.h>
425#include <asm/irq.h>
426
427#include <scsi/scsi.h>
428#include <scsi/scsi_cmnd.h>
429#include <scsi/scsi_device.h>
430#include <scsi/scsi_host.h>
431#include <scsi/scsi_tcq.h>
432#include <scsi/scsicam.h>
433
434static int u14_34f_detect(struct scsi_host_template *);
435static int u14_34f_release(struct Scsi_Host *);
Jeff Garzikf2812332010-11-16 02:10:29 -0500436static int u14_34f_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437static int u14_34f_eh_abort(struct scsi_cmnd *);
438static int u14_34f_eh_host_reset(struct scsi_cmnd *);
439static int u14_34f_bios_param(struct scsi_device *, struct block_device *,
440 sector_t, int *);
441static int u14_34f_slave_configure(struct scsi_device *);
442
443static struct scsi_host_template driver_template = {
444 .name = "UltraStor 14F/34F rev. 8.10.00 ",
445 .detect = u14_34f_detect,
446 .release = u14_34f_release,
447 .queuecommand = u14_34f_queuecommand,
448 .eh_abort_handler = u14_34f_eh_abort,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700449 .eh_host_reset_handler = u14_34f_eh_host_reset,
450 .bios_param = u14_34f_bios_param,
451 .slave_configure = u14_34f_slave_configure,
452 .this_id = 7,
453 .unchecked_isa_dma = 1,
Andrew Morton7530c202007-09-17 15:29:44 +0200454 .use_clustering = ENABLE_CLUSTERING,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700455 };
456
457#if !defined(__BIG_ENDIAN_BITFIELD) && !defined(__LITTLE_ENDIAN_BITFIELD)
458#error "Adjust your <asm/byteorder.h> defines"
459#endif
460
461/* Values for the PRODUCT_ID ports for the 14/34F */
462#define PRODUCT_ID1 0x56
463#define PRODUCT_ID2 0x40 /* NOTE: Only upper nibble is used */
464
465/* Subversion values */
466#define ISA 0
467#define ESA 1
468
469#define OP_HOST_ADAPTER 0x1
470#define OP_SCSI 0x2
471#define OP_RESET 0x4
472#define DTD_SCSI 0x0
473#define DTD_IN 0x1
474#define DTD_OUT 0x2
475#define DTD_NONE 0x3
476#define HA_CMD_INQUIRY 0x1
477#define HA_CMD_SELF_DIAG 0x2
478#define HA_CMD_READ_BUFF 0x3
479#define HA_CMD_WRITE_BUFF 0x4
480
481#undef DEBUG_LINKED_COMMANDS
482#undef DEBUG_DETECT
483#undef DEBUG_INTERRUPT
484#undef DEBUG_RESET
485#undef DEBUG_GENERATE_ERRORS
486#undef DEBUG_GENERATE_ABORTS
487#undef DEBUG_GEOMETRY
488
489#define MAX_ISA 3
490#define MAX_VESA 1
491#define MAX_EISA 0
492#define MAX_PCI 0
493#define MAX_BOARDS (MAX_ISA + MAX_VESA + MAX_EISA + MAX_PCI)
494#define MAX_CHANNEL 1
495#define MAX_LUN 8
496#define MAX_TARGET 8
497#define MAX_MAILBOXES 16
498#define MAX_SGLIST 32
499#define MAX_SAFE_SGLIST 16
500#define MAX_INTERNAL_RETRIES 64
501#define MAX_CMD_PER_LUN 2
502#define MAX_TAGGED_CMD_PER_LUN (MAX_MAILBOXES - MAX_CMD_PER_LUN)
503
504#define SKIP ULONG_MAX
505#define FALSE 0
506#define TRUE 1
507#define FREE 0
508#define IN_USE 1
509#define LOCKED 2
510#define IN_RESET 3
511#define IGNORE 4
512#define READY 5
513#define ABORTING 6
514#define NO_DMA 0xff
515#define MAXLOOP 10000
516#define TAG_DISABLED 0
517#define TAG_SIMPLE 1
518#define TAG_ORDERED 2
519
520#define REG_LCL_MASK 0
521#define REG_LCL_INTR 1
522#define REG_SYS_MASK 2
523#define REG_SYS_INTR 3
524#define REG_PRODUCT_ID1 4
525#define REG_PRODUCT_ID2 5
526#define REG_CONFIG1 6
527#define REG_CONFIG2 7
528#define REG_OGM 8
529#define REG_ICM 12
530#define REGION_SIZE 13UL
531#define BSY_ASSERTED 0x01
532#define IRQ_ASSERTED 0x01
533#define CMD_RESET 0xc0
534#define CMD_OGM_INTR 0x01
535#define CMD_CLR_INTR 0x01
536#define CMD_ENA_INTR 0x81
537#define ASOK 0x00
538#define ASST 0x91
539
540#define YESNO(a) ((a) ? 'y' : 'n')
541#define TLDEV(type) ((type) == TYPE_DISK || (type) == TYPE_ROM)
542
543#define PACKED __attribute__((packed))
544
545struct sg_list {
546 unsigned int address; /* Segment Address */
547 unsigned int num_bytes; /* Segment Length */
548 };
549
550/* MailBox SCSI Command Packet */
551struct mscp {
552
553#if defined(__BIG_ENDIAN_BITFIELD)
554 unsigned char sg:1, ca:1, dcn:1, xdir:2, opcode:3;
555 unsigned char lun: 3, channel:2, target:3;
556#else
557 unsigned char opcode: 3, /* type of command */
558 xdir: 2, /* data transfer direction */
559 dcn: 1, /* disable disconnect */
560 ca: 1, /* use cache (if available) */
561 sg: 1; /* scatter/gather operation */
562 unsigned char target: 3, /* SCSI target id */
563 channel: 2, /* SCSI channel number */
564 lun: 3; /* SCSI logical unit number */
565#endif
566
567 unsigned int data_address PACKED; /* transfer data pointer */
568 unsigned int data_len PACKED; /* length in bytes */
569 unsigned int link_address PACKED; /* for linking command chains */
570 unsigned char clink_id; /* identifies command in chain */
571 unsigned char use_sg; /* (if sg is set) 8 bytes per list */
572 unsigned char sense_len;
573 unsigned char cdb_len; /* 6, 10, or 12 */
574 unsigned char cdb[12]; /* SCSI Command Descriptor Block */
575 unsigned char adapter_status; /* non-zero indicates HA error */
576 unsigned char target_status; /* non-zero indicates target error */
577 unsigned int sense_addr PACKED;
578
579 /* Additional fields begin here. */
580 struct scsi_cmnd *SCpnt;
581 unsigned int cpp_index; /* cp index */
582
583 /* All the cp structure is zero filled by queuecommand except the
584 following CP_TAIL_SIZE bytes, initialized by detect */
585 dma_addr_t cp_dma_addr; /* dma handle for this cp structure */
586 struct sg_list *sglist; /* pointer to the allocated SG list */
587 };
588
589#define CP_TAIL_SIZE (sizeof(struct sglist *) + sizeof(dma_addr_t))
590
591struct hostdata {
592 struct mscp cp[MAX_MAILBOXES]; /* Mailboxes for this board */
593 unsigned int cp_stat[MAX_MAILBOXES]; /* FREE, IN_USE, LOCKED, IN_RESET */
594 unsigned int last_cp_used; /* Index of last mailbox used */
595 unsigned int iocount; /* Total i/o done for this board */
596 int board_number; /* Number of this board */
597 char board_name[16]; /* Name of this board */
598 int in_reset; /* True if board is doing a reset */
599 int target_to[MAX_TARGET][MAX_CHANNEL]; /* N. of timeout errors on target */
600 int target_redo[MAX_TARGET][MAX_CHANNEL]; /* If TRUE redo i/o on target */
601 unsigned int retries; /* Number of internal retries */
602 unsigned long last_retried_pid; /* Pid of last retried command */
603 unsigned char subversion; /* Bus type, either ISA or ESA */
604 struct pci_dev *pdev; /* Always NULL */
605 unsigned char heads;
606 unsigned char sectors;
607 char board_id[256]; /* data from INQUIRY on this board */
608 };
609
610static struct Scsi_Host *sh[MAX_BOARDS + 1];
611static const char *driver_name = "Ux4F";
612static char sha[MAX_BOARDS];
613static DEFINE_SPINLOCK(driver_lock);
614
615/* Initialize num_boards so that ihdlr can work while detect is in progress */
616static unsigned int num_boards = MAX_BOARDS;
617
618static unsigned long io_port[] = {
619
620 /* Space for MAX_INT_PARAM ports usable while loading as a module */
621 SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
622 SKIP, SKIP,
623
624 /* Possible ISA/VESA ports */
625 0x330, 0x340, 0x230, 0x240, 0x210, 0x130, 0x140,
626
627 /* End of list */
628 0x0
629 };
630
631#define HD(board) ((struct hostdata *) &sh[board]->hostdata)
632#define BN(board) (HD(board)->board_name)
633
634/* Device is Little Endian */
635#define H2DEV(x) cpu_to_le32(x)
636#define DEV2H(x) le32_to_cpu(x)
637
David Howells7d12e782006-10-05 14:55:46 +0100638static irqreturn_t do_interrupt_handler(int, void *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639static void flush_dev(struct scsi_device *, unsigned long, unsigned int, unsigned int);
640static int do_trace = FALSE;
641static int setup_done = FALSE;
642static int link_statistics;
643static int ext_tran = FALSE;
644
645#if defined(HAVE_OLD_UX4F_FIRMWARE)
646static int have_old_firmware = TRUE;
647#else
648static int have_old_firmware = FALSE;
649#endif
650
651#if defined(CONFIG_SCSI_U14_34F_TAGGED_QUEUE)
652static int tag_mode = TAG_SIMPLE;
653#else
654static int tag_mode = TAG_DISABLED;
655#endif
656
657#if defined(CONFIG_SCSI_U14_34F_LINKED_COMMANDS)
658static int linked_comm = TRUE;
659#else
660static int linked_comm = FALSE;
661#endif
662
663#if defined(CONFIG_SCSI_U14_34F_MAX_TAGS)
664static int max_queue_depth = CONFIG_SCSI_U14_34F_MAX_TAGS;
665#else
666static int max_queue_depth = MAX_CMD_PER_LUN;
667#endif
668
669#define MAX_INT_PARAM 10
670#define MAX_BOOT_OPTIONS_SIZE 256
671static char boot_options[MAX_BOOT_OPTIONS_SIZE];
672
673#if defined(MODULE)
674#include <linux/module.h>
675#include <linux/moduleparam.h>
676
677module_param_string(u14_34f, boot_options, MAX_BOOT_OPTIONS_SIZE, 0);
678MODULE_PARM_DESC(u14_34f, " equivalent to the \"u14-34f=...\" kernel boot " \
679"option." \
680" Example: modprobe u14-34f \"u14_34f=0x340,0x330,lc:y,tm:0,mq:4\"");
681MODULE_AUTHOR("Dario Ballabio");
682MODULE_LICENSE("GPL");
683MODULE_DESCRIPTION("UltraStor 14F/34F SCSI Driver");
684
685#endif
686
687static int u14_34f_slave_configure(struct scsi_device *dev) {
688 int j, tqd, utqd;
689 char *tag_suffix, *link_suffix;
690 struct Scsi_Host *host = dev->host;
691
692 j = ((struct hostdata *) host->hostdata)->board_number;
693
694 utqd = MAX_CMD_PER_LUN;
695 tqd = max_queue_depth;
696
697 if (TLDEV(dev->type) && dev->tagged_supported)
698
699 if (tag_mode == TAG_SIMPLE) {
700 scsi_adjust_queue_depth(dev, MSG_SIMPLE_TAG, tqd);
701 tag_suffix = ", simple tags";
702 }
703 else if (tag_mode == TAG_ORDERED) {
704 scsi_adjust_queue_depth(dev, MSG_ORDERED_TAG, tqd);
705 tag_suffix = ", ordered tags";
706 }
707 else {
708 scsi_adjust_queue_depth(dev, 0, tqd);
709 tag_suffix = ", no tags";
710 }
711
712 else if (TLDEV(dev->type) && linked_comm) {
713 scsi_adjust_queue_depth(dev, 0, tqd);
714 tag_suffix = ", untagged";
715 }
716
717 else {
718 scsi_adjust_queue_depth(dev, 0, utqd);
719 tag_suffix = "";
720 }
721
722 if (TLDEV(dev->type) && linked_comm && dev->queue_depth > 2)
723 link_suffix = ", sorted";
724 else if (TLDEV(dev->type))
725 link_suffix = ", unsorted";
726 else
727 link_suffix = "";
728
Jeff Garzik017560f2005-10-24 18:04:36 -0400729 sdev_printk(KERN_INFO, dev, "cmds/lun %d%s%s.\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700730 dev->queue_depth, link_suffix, tag_suffix);
731
732 return FALSE;
733}
734
735static int wait_on_busy(unsigned long iobase, unsigned int loop) {
736
737 while (inb(iobase + REG_LCL_INTR) & BSY_ASSERTED) {
738 udelay(1L);
739 if (--loop == 0) return TRUE;
740 }
741
742 return FALSE;
743}
744
745static int board_inquiry(unsigned int j) {
746 struct mscp *cpp;
747 dma_addr_t id_dma_addr;
Alan Cox392512f2008-05-02 14:21:50 +0100748 unsigned int limit = 0;
749 unsigned long time;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700750
751 id_dma_addr = pci_map_single(HD(j)->pdev, HD(j)->board_id,
752 sizeof(HD(j)->board_id), PCI_DMA_BIDIRECTIONAL);
753 cpp = &HD(j)->cp[0];
754 cpp->cp_dma_addr = pci_map_single(HD(j)->pdev, cpp, sizeof(struct mscp),
755 PCI_DMA_BIDIRECTIONAL);
756 memset(cpp, 0, sizeof(struct mscp) - CP_TAIL_SIZE);
757 cpp->opcode = OP_HOST_ADAPTER;
758 cpp->xdir = DTD_IN;
759 cpp->data_address = H2DEV(id_dma_addr);
760 cpp->data_len = H2DEV(sizeof(HD(j)->board_id));
761 cpp->cdb_len = 6;
762 cpp->cdb[0] = HA_CMD_INQUIRY;
763
764 if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
765 printk("%s: board_inquiry, adapter busy.\n", BN(j));
766 return TRUE;
767 }
768
769 HD(j)->cp_stat[0] = IGNORE;
770
771 /* Clear the interrupt indication */
772 outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR);
773
774 /* Store pointer in OGM address bytes */
775 outl(H2DEV(cpp->cp_dma_addr), sh[j]->io_port + REG_OGM);
776
777 /* Issue OGM interrupt */
778 outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
779
780 spin_unlock_irq(&driver_lock);
781 time = jiffies;
782 while ((jiffies - time) < HZ && limit++ < 20000) udelay(100L);
783 spin_lock_irq(&driver_lock);
784
785 if (cpp->adapter_status || HD(j)->cp_stat[0] != FREE) {
786 HD(j)->cp_stat[0] = FREE;
787 printk("%s: board_inquiry, err 0x%x.\n", BN(j), cpp->adapter_status);
788 return TRUE;
789 }
790
791 pci_unmap_single(HD(j)->pdev, cpp->cp_dma_addr, sizeof(struct mscp),
792 PCI_DMA_BIDIRECTIONAL);
793 pci_unmap_single(HD(j)->pdev, id_dma_addr, sizeof(HD(j)->board_id),
794 PCI_DMA_BIDIRECTIONAL);
795 return FALSE;
796}
797
798static int port_detect \
799 (unsigned long port_base, unsigned int j, struct scsi_host_template *tpnt) {
800 unsigned char irq, dma_channel, subversion, i;
801 unsigned char in_byte;
802 char *bus_type, dma_name[16];
803
804 /* Allowed BIOS base addresses (NULL indicates reserved) */
805 unsigned long bios_segment_table[8] = {
806 0,
807 0xc4000, 0xc8000, 0xcc000, 0xd0000,
808 0xd4000, 0xd8000, 0xdc000
809 };
810
811 /* Allowed IRQs */
812 unsigned char interrupt_table[4] = { 15, 14, 11, 10 };
813
814 /* Allowed DMA channels for ISA (0 indicates reserved) */
815 unsigned char dma_channel_table[4] = { 5, 6, 7, 0 };
816
817 /* Head/sector mappings */
818 struct {
819 unsigned char heads;
820 unsigned char sectors;
821 } mapping_table[4] = {
822 { 16, 63 }, { 64, 32 }, { 64, 63 }, { 64, 32 }
823 };
824
825 struct config_1 {
826
827#if defined(__BIG_ENDIAN_BITFIELD)
828 unsigned char dma_channel: 2, interrupt:2,
829 removable_disks_as_fixed:1, bios_segment: 3;
830#else
831 unsigned char bios_segment: 3, removable_disks_as_fixed: 1,
832 interrupt: 2, dma_channel: 2;
833#endif
834
835 } config_1;
836
837 struct config_2 {
838
839#if defined(__BIG_ENDIAN_BITFIELD)
840 unsigned char tfr_port: 2, bios_drive_number: 1,
841 mapping_mode: 2, ha_scsi_id: 3;
842#else
843 unsigned char ha_scsi_id: 3, mapping_mode: 2,
844 bios_drive_number: 1, tfr_port: 2;
845#endif
846
847 } config_2;
848
849 char name[16];
850
851 sprintf(name, "%s%d", driver_name, j);
852
853 if (!request_region(port_base, REGION_SIZE, driver_name)) {
854#if defined(DEBUG_DETECT)
855 printk("%s: address 0x%03lx in use, skipping probe.\n", name, port_base);
856#endif
857 goto fail;
858 }
859
860 spin_lock_irq(&driver_lock);
861
862 if (inb(port_base + REG_PRODUCT_ID1) != PRODUCT_ID1) goto freelock;
863
864 in_byte = inb(port_base + REG_PRODUCT_ID2);
865
866 if ((in_byte & 0xf0) != PRODUCT_ID2) goto freelock;
867
868 *(char *)&config_1 = inb(port_base + REG_CONFIG1);
869 *(char *)&config_2 = inb(port_base + REG_CONFIG2);
870
871 irq = interrupt_table[config_1.interrupt];
872 dma_channel = dma_channel_table[config_1.dma_channel];
873 subversion = (in_byte & 0x0f);
874
875 /* Board detected, allocate its IRQ */
876 if (request_irq(irq, do_interrupt_handler,
Thomas Gleixner1d6f3592006-07-01 19:29:42 -0700877 IRQF_DISABLED | ((subversion == ESA) ? IRQF_SHARED : 0),
Linus Torvalds1da177e2005-04-16 15:20:36 -0700878 driver_name, (void *) &sha[j])) {
879 printk("%s: unable to allocate IRQ %u, detaching.\n", name, irq);
880 goto freelock;
881 }
882
883 if (subversion == ISA && request_dma(dma_channel, driver_name)) {
884 printk("%s: unable to allocate DMA channel %u, detaching.\n",
885 name, dma_channel);
886 goto freeirq;
887 }
888
889 if (have_old_firmware) tpnt->use_clustering = DISABLE_CLUSTERING;
890
891 spin_unlock_irq(&driver_lock);
892 sh[j] = scsi_register(tpnt, sizeof(struct hostdata));
893 spin_lock_irq(&driver_lock);
894
895 if (sh[j] == NULL) {
896 printk("%s: unable to register host, detaching.\n", name);
897 goto freedma;
898 }
899
900 sh[j]->io_port = port_base;
901 sh[j]->unique_id = port_base;
902 sh[j]->n_io_port = REGION_SIZE;
903 sh[j]->base = bios_segment_table[config_1.bios_segment];
904 sh[j]->irq = irq;
905 sh[j]->sg_tablesize = MAX_SGLIST;
906 sh[j]->this_id = config_2.ha_scsi_id;
907 sh[j]->can_queue = MAX_MAILBOXES;
908 sh[j]->cmd_per_lun = MAX_CMD_PER_LUN;
909
910#if defined(DEBUG_DETECT)
911 {
912 unsigned char sys_mask, lcl_mask;
913
914 sys_mask = inb(sh[j]->io_port + REG_SYS_MASK);
915 lcl_mask = inb(sh[j]->io_port + REG_LCL_MASK);
916 printk("SYS_MASK 0x%x, LCL_MASK 0x%x.\n", sys_mask, lcl_mask);
917 }
918#endif
919
920 /* Probably a bogus host scsi id, set it to the dummy value */
921 if (sh[j]->this_id == 0) sh[j]->this_id = -1;
922
923 /* If BIOS is disabled, force enable interrupts */
924 if (sh[j]->base == 0) outb(CMD_ENA_INTR, sh[j]->io_port + REG_SYS_MASK);
925
926 memset(HD(j), 0, sizeof(struct hostdata));
927 HD(j)->heads = mapping_table[config_2.mapping_mode].heads;
928 HD(j)->sectors = mapping_table[config_2.mapping_mode].sectors;
929 HD(j)->subversion = subversion;
930 HD(j)->pdev = NULL;
931 HD(j)->board_number = j;
932
933 if (have_old_firmware) sh[j]->sg_tablesize = MAX_SAFE_SGLIST;
934
935 if (HD(j)->subversion == ESA) {
936 sh[j]->unchecked_isa_dma = FALSE;
937 sh[j]->dma_channel = NO_DMA;
938 sprintf(BN(j), "U34F%d", j);
939 bus_type = "VESA";
940 }
941 else {
942 unsigned long flags;
943 sh[j]->unchecked_isa_dma = TRUE;
944
945 flags=claim_dma_lock();
946 disable_dma(dma_channel);
947 clear_dma_ff(dma_channel);
948 set_dma_mode(dma_channel, DMA_MODE_CASCADE);
949 enable_dma(dma_channel);
950 release_dma_lock(flags);
951
952 sh[j]->dma_channel = dma_channel;
953 sprintf(BN(j), "U14F%d", j);
954 bus_type = "ISA";
955 }
956
957 sh[j]->max_channel = MAX_CHANNEL - 1;
958 sh[j]->max_id = MAX_TARGET;
959 sh[j]->max_lun = MAX_LUN;
960
961 if (HD(j)->subversion == ISA && !board_inquiry(j)) {
962 HD(j)->board_id[40] = 0;
963
964 if (strcmp(&HD(j)->board_id[32], "06000600")) {
965 printk("%s: %s.\n", BN(j), &HD(j)->board_id[8]);
966 printk("%s: firmware %s is outdated, FW PROM should be 28004-006.\n",
967 BN(j), &HD(j)->board_id[32]);
968 sh[j]->hostt->use_clustering = DISABLE_CLUSTERING;
969 sh[j]->sg_tablesize = MAX_SAFE_SGLIST;
970 }
971 }
972
973 if (dma_channel == NO_DMA) sprintf(dma_name, "%s", "BMST");
974 else sprintf(dma_name, "DMA %u", dma_channel);
975
976 spin_unlock_irq(&driver_lock);
977
978 for (i = 0; i < sh[j]->can_queue; i++)
979 HD(j)->cp[i].cp_dma_addr = pci_map_single(HD(j)->pdev,
980 &HD(j)->cp[i], sizeof(struct mscp), PCI_DMA_BIDIRECTIONAL);
981
982 for (i = 0; i < sh[j]->can_queue; i++)
983 if (! ((&HD(j)->cp[i])->sglist = kmalloc(
984 sh[j]->sg_tablesize * sizeof(struct sg_list),
985 (sh[j]->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC))) {
986 printk("%s: kmalloc SGlist failed, mbox %d, detaching.\n", BN(j), i);
987 goto release;
988 }
989
990 if (max_queue_depth > MAX_TAGGED_CMD_PER_LUN)
991 max_queue_depth = MAX_TAGGED_CMD_PER_LUN;
992
993 if (max_queue_depth < MAX_CMD_PER_LUN) max_queue_depth = MAX_CMD_PER_LUN;
994
995 if (tag_mode != TAG_DISABLED && tag_mode != TAG_SIMPLE)
996 tag_mode = TAG_ORDERED;
997
998 if (j == 0) {
999 printk("UltraStor 14F/34F: Copyright (C) 1994-2003 Dario Ballabio.\n");
1000 printk("%s config options -> of:%c, tm:%d, lc:%c, mq:%d, et:%c.\n",
1001 driver_name, YESNO(have_old_firmware), tag_mode,
1002 YESNO(linked_comm), max_queue_depth, YESNO(ext_tran));
1003 }
1004
1005 printk("%s: %s 0x%03lx, BIOS 0x%05x, IRQ %u, %s, SG %d, MB %d.\n",
1006 BN(j), bus_type, (unsigned long)sh[j]->io_port, (int)sh[j]->base,
1007 sh[j]->irq, dma_name, sh[j]->sg_tablesize, sh[j]->can_queue);
1008
1009 if (sh[j]->max_id > 8 || sh[j]->max_lun > 8)
1010 printk("%s: wide SCSI support enabled, max_id %u, max_lun %u.\n",
1011 BN(j), sh[j]->max_id, sh[j]->max_lun);
1012
1013 for (i = 0; i <= sh[j]->max_channel; i++)
1014 printk("%s: SCSI channel %u enabled, host target ID %d.\n",
1015 BN(j), i, sh[j]->this_id);
1016
1017 return TRUE;
1018
1019freedma:
1020 if (subversion == ISA) free_dma(dma_channel);
1021freeirq:
1022 free_irq(irq, &sha[j]);
1023freelock:
1024 spin_unlock_irq(&driver_lock);
1025 release_region(port_base, REGION_SIZE);
1026fail:
1027 return FALSE;
1028
1029release:
1030 u14_34f_release(sh[j]);
1031 return FALSE;
1032}
1033
1034static void internal_setup(char *str, int *ints) {
1035 int i, argc = ints[0];
1036 char *cur = str, *pc;
1037
1038 if (argc > 0) {
1039
1040 if (argc > MAX_INT_PARAM) argc = MAX_INT_PARAM;
1041
1042 for (i = 0; i < argc; i++) io_port[i] = ints[i + 1];
1043
1044 io_port[i] = 0;
1045 setup_done = TRUE;
1046 }
1047
1048 while (cur && (pc = strchr(cur, ':'))) {
1049 int val = 0, c = *++pc;
1050
1051 if (c == 'n' || c == 'N') val = FALSE;
1052 else if (c == 'y' || c == 'Y') val = TRUE;
1053 else val = (int) simple_strtoul(pc, NULL, 0);
1054
1055 if (!strncmp(cur, "lc:", 3)) linked_comm = val;
1056 else if (!strncmp(cur, "of:", 3)) have_old_firmware = val;
1057 else if (!strncmp(cur, "tm:", 3)) tag_mode = val;
1058 else if (!strncmp(cur, "tc:", 3)) tag_mode = val;
1059 else if (!strncmp(cur, "mq:", 3)) max_queue_depth = val;
1060 else if (!strncmp(cur, "ls:", 3)) link_statistics = val;
1061 else if (!strncmp(cur, "et:", 3)) ext_tran = val;
1062
1063 if ((cur = strchr(cur, ','))) ++cur;
1064 }
1065
1066 return;
1067}
1068
1069static int option_setup(char *str) {
1070 int ints[MAX_INT_PARAM];
1071 char *cur = str;
1072 int i = 1;
1073
Roel Kluin4a02462a2009-12-08 14:08:59 -08001074 while (cur && isdigit(*cur) && i < MAX_INT_PARAM) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001075 ints[i++] = simple_strtoul(cur, NULL, 0);
1076
1077 if ((cur = strchr(cur, ',')) != NULL) cur++;
1078 }
1079
1080 ints[0] = i - 1;
1081 internal_setup(cur, ints);
1082 return 1;
1083}
1084
1085static int u14_34f_detect(struct scsi_host_template *tpnt) {
1086 unsigned int j = 0, k;
1087
1088 tpnt->proc_name = "u14-34f";
1089
1090 if(strlen(boot_options)) option_setup(boot_options);
1091
1092#if defined(MODULE)
1093 /* io_port could have been modified when loading as a module */
1094 if(io_port[0] != SKIP) {
1095 setup_done = TRUE;
1096 io_port[MAX_INT_PARAM] = 0;
1097 }
1098#endif
1099
1100 for (k = 0; k < MAX_BOARDS + 1; k++) sh[k] = NULL;
1101
1102 for (k = 0; io_port[k]; k++) {
1103
1104 if (io_port[k] == SKIP) continue;
1105
1106 if (j < MAX_BOARDS && port_detect(io_port[k], j, tpnt)) j++;
1107 }
1108
1109 num_boards = j;
1110 return j;
1111}
1112
1113static void map_dma(unsigned int i, unsigned int j) {
1114 unsigned int data_len = 0;
roel kluin8d6dda72008-10-29 14:24:47 -07001115 unsigned int k, pci_dir;
1116 int count;
FUJITA Tomonorifea97f92007-05-14 19:24:58 +09001117 struct scatterlist *sg;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001118 struct mscp *cpp;
1119 struct scsi_cmnd *SCpnt;
1120
1121 cpp = &HD(j)->cp[i]; SCpnt = cpp->SCpnt;
1122 pci_dir = SCpnt->sc_data_direction;
1123
1124 if (SCpnt->sense_buffer)
1125 cpp->sense_addr = H2DEV(pci_map_single(HD(j)->pdev, SCpnt->sense_buffer,
FUJITA Tomonorib80ca4f2008-01-13 15:46:13 +09001126 SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001127
FUJITA Tomonorib80ca4f2008-01-13 15:46:13 +09001128 cpp->sense_len = SCSI_SENSE_BUFFERSIZE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001129
FUJITA Tomonorifea97f92007-05-14 19:24:58 +09001130 if (scsi_bufflen(SCpnt)) {
1131 count = scsi_dma_map(SCpnt);
1132 BUG_ON(count < 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001133
FUJITA Tomonorifea97f92007-05-14 19:24:58 +09001134 scsi_for_each_sg(SCpnt, sg, count, k) {
1135 cpp->sglist[k].address = H2DEV(sg_dma_address(sg));
1136 cpp->sglist[k].num_bytes = H2DEV(sg_dma_len(sg));
1137 data_len += sg->length;
1138 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001139
FUJITA Tomonorifea97f92007-05-14 19:24:58 +09001140 cpp->sg = TRUE;
1141 cpp->use_sg = scsi_sg_count(SCpnt);
1142 cpp->data_address =
1143 H2DEV(pci_map_single(HD(j)->pdev, cpp->sglist,
1144 cpp->use_sg * sizeof(struct sg_list),
1145 pci_dir));
1146 cpp->data_len = H2DEV(data_len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001147
FUJITA Tomonorifea97f92007-05-14 19:24:58 +09001148 } else {
1149 pci_dir = PCI_DMA_BIDIRECTIONAL;
1150 cpp->data_len = H2DEV(scsi_bufflen(SCpnt));
1151 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001152}
1153
1154static void unmap_dma(unsigned int i, unsigned int j) {
1155 unsigned int pci_dir;
1156 struct mscp *cpp;
1157 struct scsi_cmnd *SCpnt;
1158
1159 cpp = &HD(j)->cp[i]; SCpnt = cpp->SCpnt;
1160 pci_dir = SCpnt->sc_data_direction;
1161
1162 if (DEV2H(cpp->sense_addr))
1163 pci_unmap_single(HD(j)->pdev, DEV2H(cpp->sense_addr),
1164 DEV2H(cpp->sense_len), PCI_DMA_FROMDEVICE);
1165
FUJITA Tomonorifea97f92007-05-14 19:24:58 +09001166 scsi_dma_unmap(SCpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001167
1168 if (!DEV2H(cpp->data_len)) pci_dir = PCI_DMA_BIDIRECTIONAL;
1169
1170 if (DEV2H(cpp->data_address))
1171 pci_unmap_single(HD(j)->pdev, DEV2H(cpp->data_address),
1172 DEV2H(cpp->data_len), pci_dir);
1173}
1174
1175static void sync_dma(unsigned int i, unsigned int j) {
1176 unsigned int pci_dir;
1177 struct mscp *cpp;
1178 struct scsi_cmnd *SCpnt;
1179
1180 cpp = &HD(j)->cp[i]; SCpnt = cpp->SCpnt;
1181 pci_dir = SCpnt->sc_data_direction;
1182
1183 if (DEV2H(cpp->sense_addr))
1184 pci_dma_sync_single_for_cpu(HD(j)->pdev, DEV2H(cpp->sense_addr),
1185 DEV2H(cpp->sense_len), PCI_DMA_FROMDEVICE);
1186
FUJITA Tomonorifea97f92007-05-14 19:24:58 +09001187 if (scsi_sg_count(SCpnt))
1188 pci_dma_sync_sg_for_cpu(HD(j)->pdev, scsi_sglist(SCpnt),
1189 scsi_sg_count(SCpnt), pci_dir);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001190
1191 if (!DEV2H(cpp->data_len)) pci_dir = PCI_DMA_BIDIRECTIONAL;
1192
1193 if (DEV2H(cpp->data_address))
1194 pci_dma_sync_single_for_cpu(HD(j)->pdev, DEV2H(cpp->data_address),
1195 DEV2H(cpp->data_len), pci_dir);
1196}
1197
1198static void scsi_to_dev_dir(unsigned int i, unsigned int j) {
1199 unsigned int k;
1200
1201 static const unsigned char data_out_cmds[] = {
1202 0x0a, 0x2a, 0x15, 0x55, 0x04, 0x07, 0x18, 0x1d, 0x24, 0x2e,
1203 0x30, 0x31, 0x32, 0x38, 0x39, 0x3a, 0x3b, 0x3d, 0x3f, 0x40,
1204 0x41, 0x4c, 0xaa, 0xae, 0xb0, 0xb1, 0xb2, 0xb6, 0xea, 0x1b, 0x5d
1205 };
1206
1207 static const unsigned char data_none_cmds[] = {
1208 0x01, 0x0b, 0x10, 0x11, 0x13, 0x16, 0x17, 0x19, 0x2b, 0x1e,
1209 0x2c, 0xac, 0x2f, 0xaf, 0x33, 0xb3, 0x35, 0x36, 0x45, 0x47,
1210 0x48, 0x49, 0xa9, 0x4b, 0xa5, 0xa6, 0xb5, 0x00
1211 };
1212
1213 struct mscp *cpp;
1214 struct scsi_cmnd *SCpnt;
1215
1216 cpp = &HD(j)->cp[i]; SCpnt = cpp->SCpnt;
1217
1218 if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
1219 cpp->xdir = DTD_IN;
1220 return;
1221 }
Roel Kluind6a451d2008-02-06 19:21:07 +01001222 else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001223 cpp->xdir = DTD_OUT;
1224 return;
1225 }
1226 else if (SCpnt->sc_data_direction == DMA_NONE) {
1227 cpp->xdir = DTD_NONE;
1228 return;
1229 }
1230
1231 if (SCpnt->sc_data_direction != DMA_BIDIRECTIONAL)
1232 panic("%s: qcomm, invalid SCpnt->sc_data_direction.\n", BN(j));
1233
1234 cpp->xdir = DTD_IN;
1235
1236 for (k = 0; k < ARRAY_SIZE(data_out_cmds); k++)
1237 if (SCpnt->cmnd[0] == data_out_cmds[k]) {
1238 cpp->xdir = DTD_OUT;
1239 break;
1240 }
1241
1242 if (cpp->xdir == DTD_IN)
1243 for (k = 0; k < ARRAY_SIZE(data_none_cmds); k++)
1244 if (SCpnt->cmnd[0] == data_none_cmds[k]) {
1245 cpp->xdir = DTD_NONE;
1246 break;
1247 }
1248
1249}
1250
Jeff Garzikf2812332010-11-16 02:10:29 -05001251static int u14_34f_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001252 unsigned int i, j, k;
1253 struct mscp *cpp;
1254
1255 /* j is the board number */
1256 j = ((struct hostdata *) SCpnt->device->host->hostdata)->board_number;
1257
1258 if (SCpnt->host_scribble)
1259 panic("%s: qcomm, pid %ld, SCpnt %p already active.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001260 BN(j), SCpnt->serial_number, SCpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001261
1262 /* i is the mailbox number, look for the first free mailbox
1263 starting from last_cp_used */
1264 i = HD(j)->last_cp_used + 1;
1265
1266 for (k = 0; k < sh[j]->can_queue; k++, i++) {
1267
1268 if (i >= sh[j]->can_queue) i = 0;
1269
1270 if (HD(j)->cp_stat[i] == FREE) {
1271 HD(j)->last_cp_used = i;
1272 break;
1273 }
1274 }
1275
1276 if (k == sh[j]->can_queue) {
1277 printk("%s: qcomm, no free mailbox.\n", BN(j));
1278 return 1;
1279 }
1280
1281 /* Set pointer to control packet structure */
1282 cpp = &HD(j)->cp[i];
1283
1284 memset(cpp, 0, sizeof(struct mscp) - CP_TAIL_SIZE);
1285 SCpnt->scsi_done = done;
1286 cpp->cpp_index = i;
1287 SCpnt->host_scribble = (unsigned char *) &cpp->cpp_index;
1288
1289 if (do_trace) printk("%s: qcomm, mbox %d, target %d.%d:%d, pid %ld.\n",
1290 BN(j), i, SCpnt->device->channel, SCpnt->device->id,
Matthew Wilcox12a44162007-09-18 19:54:43 -06001291 SCpnt->device->lun, SCpnt->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001292
1293 cpp->opcode = OP_SCSI;
1294 cpp->channel = SCpnt->device->channel;
1295 cpp->target = SCpnt->device->id;
1296 cpp->lun = SCpnt->device->lun;
1297 cpp->SCpnt = SCpnt;
1298 cpp->cdb_len = SCpnt->cmd_len;
1299 memcpy(cpp->cdb, SCpnt->cmnd, SCpnt->cmd_len);
1300
1301 /* Use data transfer direction SCpnt->sc_data_direction */
1302 scsi_to_dev_dir(i, j);
1303
1304 /* Map DMA buffers and SG list */
1305 map_dma(i, j);
1306
1307 if (linked_comm && SCpnt->device->queue_depth > 2
1308 && TLDEV(SCpnt->device->type)) {
1309 HD(j)->cp_stat[i] = READY;
Tejun Heo83096eb2009-05-07 22:24:39 +09001310 flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, FALSE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001311 return 0;
1312 }
1313
1314 if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
1315 unmap_dma(i, j);
1316 SCpnt->host_scribble = NULL;
Jeff Garzik017560f2005-10-24 18:04:36 -04001317 scmd_printk(KERN_INFO, SCpnt,
Matthew Wilcox12a44162007-09-18 19:54:43 -06001318 "qcomm, pid %ld, adapter busy.\n", SCpnt->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001319 return 1;
1320 }
1321
1322 /* Store pointer in OGM address bytes */
1323 outl(H2DEV(cpp->cp_dma_addr), sh[j]->io_port + REG_OGM);
1324
1325 /* Issue OGM interrupt */
1326 outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
1327
1328 HD(j)->cp_stat[i] = IN_USE;
1329 return 0;
1330}
1331
Jeff Garzikf2812332010-11-16 02:10:29 -05001332static DEF_SCSI_QCMD(u14_34f_queuecommand)
1333
Linus Torvalds1da177e2005-04-16 15:20:36 -07001334static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) {
1335 unsigned int i, j;
1336
1337 j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
1338
1339 if (SCarg->host_scribble == NULL) {
Jeff Garzik017560f2005-10-24 18:04:36 -04001340 scmd_printk(KERN_INFO, SCarg, "abort, pid %ld inactive.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001341 SCarg->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001342 return SUCCESS;
1343 }
1344
1345 i = *(unsigned int *)SCarg->host_scribble;
Jeff Garzik017560f2005-10-24 18:04:36 -04001346 scmd_printk(KERN_INFO, SCarg, "abort, mbox %d, pid %ld.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001347 i, SCarg->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001348
1349 if (i >= sh[j]->can_queue)
1350 panic("%s: abort, invalid SCarg->host_scribble.\n", BN(j));
1351
1352 if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
1353 printk("%s: abort, timeout error.\n", BN(j));
1354 return FAILED;
1355 }
1356
1357 if (HD(j)->cp_stat[i] == FREE) {
1358 printk("%s: abort, mbox %d is free.\n", BN(j), i);
1359 return SUCCESS;
1360 }
1361
1362 if (HD(j)->cp_stat[i] == IN_USE) {
1363 printk("%s: abort, mbox %d is in use.\n", BN(j), i);
1364
1365 if (SCarg != HD(j)->cp[i].SCpnt)
1366 panic("%s: abort, mbox %d, SCarg %p, cp SCpnt %p.\n",
1367 BN(j), i, SCarg, HD(j)->cp[i].SCpnt);
1368
1369 if (inb(sh[j]->io_port + REG_SYS_INTR) & IRQ_ASSERTED)
1370 printk("%s: abort, mbox %d, interrupt pending.\n", BN(j), i);
1371
Linus Torvalds1da177e2005-04-16 15:20:36 -07001372 return FAILED;
1373 }
1374
1375 if (HD(j)->cp_stat[i] == IN_RESET) {
1376 printk("%s: abort, mbox %d is in reset.\n", BN(j), i);
1377 return FAILED;
1378 }
1379
1380 if (HD(j)->cp_stat[i] == LOCKED) {
1381 printk("%s: abort, mbox %d is locked.\n", BN(j), i);
1382 return SUCCESS;
1383 }
1384
1385 if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
1386 unmap_dma(i, j);
1387 SCarg->result = DID_ABORT << 16;
1388 SCarg->host_scribble = NULL;
1389 HD(j)->cp_stat[i] = FREE;
1390 printk("%s, abort, mbox %d ready, DID_ABORT, pid %ld done.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001391 BN(j), i, SCarg->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001392 SCarg->scsi_done(SCarg);
1393 return SUCCESS;
1394 }
1395
1396 panic("%s: abort, mbox %d, invalid cp_stat.\n", BN(j), i);
1397}
1398
1399static int u14_34f_eh_host_reset(struct scsi_cmnd *SCarg) {
Alan Cox392512f2008-05-02 14:21:50 +01001400 unsigned int i, j, k, c, limit = 0;
1401 unsigned long time;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001402 int arg_done = FALSE;
1403 struct scsi_cmnd *SCpnt;
1404
1405 j = ((struct hostdata *) SCarg->device->host->hostdata)->board_number;
Matthew Wilcox12a44162007-09-18 19:54:43 -06001406 scmd_printk(KERN_INFO, SCarg, "reset, enter, pid %ld.\n", SCarg->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001407
Jeff Garzik df0ae242005-05-28 07:57:14 -04001408 spin_lock_irq(sh[j]->host_lock);
1409
Linus Torvalds1da177e2005-04-16 15:20:36 -07001410 if (SCarg->host_scribble == NULL)
Matthew Wilcox12a44162007-09-18 19:54:43 -06001411 printk("%s: reset, pid %ld inactive.\n", BN(j), SCarg->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001412
1413 if (HD(j)->in_reset) {
1414 printk("%s: reset, exit, already in reset.\n", BN(j));
Jeff Garzik df0ae242005-05-28 07:57:14 -04001415 spin_unlock_irq(sh[j]->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001416 return FAILED;
1417 }
1418
1419 if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
1420 printk("%s: reset, exit, timeout error.\n", BN(j));
Jeff Garzik df0ae242005-05-28 07:57:14 -04001421 spin_unlock_irq(sh[j]->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001422 return FAILED;
1423 }
1424
1425 HD(j)->retries = 0;
1426
1427 for (c = 0; c <= sh[j]->max_channel; c++)
1428 for (k = 0; k < sh[j]->max_id; k++) {
1429 HD(j)->target_redo[k][c] = TRUE;
1430 HD(j)->target_to[k][c] = 0;
1431 }
1432
1433 for (i = 0; i < sh[j]->can_queue; i++) {
1434
1435 if (HD(j)->cp_stat[i] == FREE) continue;
1436
1437 if (HD(j)->cp_stat[i] == LOCKED) {
1438 HD(j)->cp_stat[i] = FREE;
1439 printk("%s: reset, locked mbox %d forced free.\n", BN(j), i);
1440 continue;
1441 }
1442
1443 if (!(SCpnt = HD(j)->cp[i].SCpnt))
1444 panic("%s: reset, mbox %d, SCpnt == NULL.\n", BN(j), i);
1445
1446 if (HD(j)->cp_stat[i] == READY || HD(j)->cp_stat[i] == ABORTING) {
1447 HD(j)->cp_stat[i] = ABORTING;
1448 printk("%s: reset, mbox %d aborting, pid %ld.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001449 BN(j), i, SCpnt->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001450 }
1451
1452 else {
1453 HD(j)->cp_stat[i] = IN_RESET;
1454 printk("%s: reset, mbox %d in reset, pid %ld.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001455 BN(j), i, SCpnt->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001456 }
1457
1458 if (SCpnt->host_scribble == NULL)
1459 panic("%s: reset, mbox %d, garbled SCpnt.\n", BN(j), i);
1460
1461 if (*(unsigned int *)SCpnt->host_scribble != i)
1462 panic("%s: reset, mbox %d, index mismatch.\n", BN(j), i);
1463
1464 if (SCpnt->scsi_done == NULL)
1465 panic("%s: reset, mbox %d, SCpnt->scsi_done == NULL.\n", BN(j), i);
1466
1467 if (SCpnt == SCarg) arg_done = TRUE;
1468 }
1469
1470 if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
1471 printk("%s: reset, cannot reset, timeout error.\n", BN(j));
Jeff Garzik df0ae242005-05-28 07:57:14 -04001472 spin_unlock_irq(sh[j]->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001473 return FAILED;
1474 }
1475
1476 outb(CMD_RESET, sh[j]->io_port + REG_LCL_INTR);
1477 printk("%s: reset, board reset done, enabling interrupts.\n", BN(j));
1478
1479#if defined(DEBUG_RESET)
1480 do_trace = TRUE;
1481#endif
1482
1483 HD(j)->in_reset = TRUE;
1484
1485 spin_unlock_irq(sh[j]->host_lock);
1486 time = jiffies;
1487 while ((jiffies - time) < (10 * HZ) && limit++ < 200000) udelay(100L);
1488 spin_lock_irq(sh[j]->host_lock);
1489
1490 printk("%s: reset, interrupts disabled, loops %d.\n", BN(j), limit);
1491
1492 for (i = 0; i < sh[j]->can_queue; i++) {
1493
1494 if (HD(j)->cp_stat[i] == IN_RESET) {
1495 SCpnt = HD(j)->cp[i].SCpnt;
1496 unmap_dma(i, j);
1497 SCpnt->result = DID_RESET << 16;
1498 SCpnt->host_scribble = NULL;
1499
1500 /* This mailbox is still waiting for its interrupt */
1501 HD(j)->cp_stat[i] = LOCKED;
1502
1503 printk("%s, reset, mbox %d locked, DID_RESET, pid %ld done.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001504 BN(j), i, SCpnt->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001505 }
1506
1507 else if (HD(j)->cp_stat[i] == ABORTING) {
1508 SCpnt = HD(j)->cp[i].SCpnt;
1509 unmap_dma(i, j);
1510 SCpnt->result = DID_RESET << 16;
1511 SCpnt->host_scribble = NULL;
1512
1513 /* This mailbox was never queued to the adapter */
1514 HD(j)->cp_stat[i] = FREE;
1515
1516 printk("%s, reset, mbox %d aborting, DID_RESET, pid %ld done.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001517 BN(j), i, SCpnt->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001518 }
1519
1520 else
1521
1522 /* Any other mailbox has already been set free by interrupt */
1523 continue;
1524
1525 SCpnt->scsi_done(SCpnt);
1526 }
1527
1528 HD(j)->in_reset = FALSE;
1529 do_trace = FALSE;
1530
Matthew Wilcox12a44162007-09-18 19:54:43 -06001531 if (arg_done) printk("%s: reset, exit, pid %ld done.\n", BN(j), SCarg->serial_number);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001532 else printk("%s: reset, exit.\n", BN(j));
1533
Jeff Garzik df0ae242005-05-28 07:57:14 -04001534 spin_unlock_irq(sh[j]->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001535 return SUCCESS;
1536}
1537
1538static int u14_34f_bios_param(struct scsi_device *disk,
1539 struct block_device *bdev, sector_t capacity, int *dkinfo) {
1540 unsigned int j = 0;
1541 unsigned int size = capacity;
1542
1543 dkinfo[0] = HD(j)->heads;
1544 dkinfo[1] = HD(j)->sectors;
1545 dkinfo[2] = size / (HD(j)->heads * HD(j)->sectors);
1546
1547 if (ext_tran && (scsicam_bios_param(bdev, capacity, dkinfo) < 0)) {
1548 dkinfo[0] = 255;
1549 dkinfo[1] = 63;
1550 dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);
1551 }
1552
1553#if defined (DEBUG_GEOMETRY)
1554 printk ("%s: bios_param, head=%d, sec=%d, cyl=%d.\n", driver_name,
1555 dkinfo[0], dkinfo[1], dkinfo[2]);
1556#endif
1557
1558 return FALSE;
1559}
1560
1561static void sort(unsigned long sk[], unsigned int da[], unsigned int n,
1562 unsigned int rev) {
1563 unsigned int i, j, k, y;
1564 unsigned long x;
1565
1566 for (i = 0; i < n - 1; i++) {
1567 k = i;
1568
1569 for (j = k + 1; j < n; j++)
1570 if (rev) {
1571 if (sk[j] > sk[k]) k = j;
1572 }
1573 else {
1574 if (sk[j] < sk[k]) k = j;
1575 }
1576
1577 if (k != i) {
1578 x = sk[k]; sk[k] = sk[i]; sk[i] = x;
1579 y = da[k]; da[k] = da[i]; da[i] = y;
1580 }
1581 }
1582
1583 return;
1584 }
1585
1586static int reorder(unsigned int j, unsigned long cursec,
1587 unsigned int ihdlr, unsigned int il[], unsigned int n_ready) {
1588 struct scsi_cmnd *SCpnt;
1589 struct mscp *cpp;
1590 unsigned int k, n;
1591 unsigned int rev = FALSE, s = TRUE, r = TRUE;
1592 unsigned int input_only = TRUE, overlap = FALSE;
1593 unsigned long sl[n_ready], pl[n_ready], ll[n_ready];
1594 unsigned long maxsec = 0, minsec = ULONG_MAX, seek = 0, iseek = 0;
1595 unsigned long ioseek = 0;
1596
1597 static unsigned int flushcount = 0, batchcount = 0, sortcount = 0;
1598 static unsigned int readycount = 0, ovlcount = 0, inputcount = 0;
1599 static unsigned int readysorted = 0, revcount = 0;
1600 static unsigned long seeksorted = 0, seeknosort = 0;
1601
1602 if (link_statistics && !(++flushcount % link_statistics))
1603 printk("fc %d bc %d ic %d oc %d rc %d rs %d sc %d re %d"\
1604 " av %ldK as %ldK.\n", flushcount, batchcount, inputcount,
1605 ovlcount, readycount, readysorted, sortcount, revcount,
1606 seeknosort / (readycount + 1),
1607 seeksorted / (readycount + 1));
1608
1609 if (n_ready <= 1) return FALSE;
1610
1611 for (n = 0; n < n_ready; n++) {
1612 k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
1613
1614 if (!(cpp->xdir == DTD_IN)) input_only = FALSE;
1615
Tejun Heo83096eb2009-05-07 22:24:39 +09001616 if (blk_rq_pos(SCpnt->request) < minsec)
1617 minsec = blk_rq_pos(SCpnt->request);
1618 if (blk_rq_pos(SCpnt->request) > maxsec)
1619 maxsec = blk_rq_pos(SCpnt->request);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001620
Tejun Heo83096eb2009-05-07 22:24:39 +09001621 sl[n] = blk_rq_pos(SCpnt->request);
1622 ioseek += blk_rq_sectors(SCpnt->request);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001623
1624 if (!n) continue;
1625
1626 if (sl[n] < sl[n - 1]) s = FALSE;
1627 if (sl[n] > sl[n - 1]) r = FALSE;
1628
1629 if (link_statistics) {
1630 if (sl[n] > sl[n - 1])
1631 seek += sl[n] - sl[n - 1];
1632 else
1633 seek += sl[n - 1] - sl[n];
1634 }
1635
1636 }
1637
1638 if (link_statistics) {
1639 if (cursec > sl[0]) seek += cursec - sl[0]; else seek += sl[0] - cursec;
1640 }
1641
1642 if (cursec > ((maxsec + minsec) / 2)) rev = TRUE;
1643
1644 if (ioseek > ((maxsec - minsec) / 2)) rev = FALSE;
1645
1646 if (!((rev && r) || (!rev && s))) sort(sl, il, n_ready, rev);
1647
1648 if (!input_only) for (n = 0; n < n_ready; n++) {
1649 k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
Tejun Heo83096eb2009-05-07 22:24:39 +09001650 ll[n] = blk_rq_sectors(SCpnt->request); pl[n] = SCpnt->serial_number;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001651
1652 if (!n) continue;
1653
1654 if ((sl[n] == sl[n - 1]) || (!rev && ((sl[n - 1] + ll[n - 1]) > sl[n]))
1655 || (rev && ((sl[n] + ll[n]) > sl[n - 1]))) overlap = TRUE;
1656 }
1657
1658 if (overlap) sort(pl, il, n_ready, FALSE);
1659
1660 if (link_statistics) {
1661 if (cursec > sl[0]) iseek = cursec - sl[0]; else iseek = sl[0] - cursec;
1662 batchcount++; readycount += n_ready; seeknosort += seek / 1024;
1663 if (input_only) inputcount++;
1664 if (overlap) { ovlcount++; seeksorted += iseek / 1024; }
1665 else seeksorted += (iseek + maxsec - minsec) / 1024;
1666 if (rev && !r) { revcount++; readysorted += n_ready; }
1667 if (!rev && !s) { sortcount++; readysorted += n_ready; }
1668 }
1669
1670#if defined(DEBUG_LINKED_COMMANDS)
1671 if (link_statistics && (overlap || !(flushcount % link_statistics)))
1672 for (n = 0; n < n_ready; n++) {
1673 k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
Tejun Heo83096eb2009-05-07 22:24:39 +09001674 printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %u"\
Linus Torvalds1da177e2005-04-16 15:20:36 -07001675 " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
1676 (ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target,
Matthew Wilcox12a44162007-09-18 19:54:43 -06001677 SCpnt->lun, SCpnt->serial_number, k, flushcount, n_ready,
Tejun Heo83096eb2009-05-07 22:24:39 +09001678 blk_rq_pos(SCpnt->request), blk_rq_sectors(SCpnt->request),
1679 cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only),
Linus Torvalds1da177e2005-04-16 15:20:36 -07001680 YESNO(overlap), cpp->xdir);
1681 }
1682#endif
1683 return overlap;
1684}
1685
1686static void flush_dev(struct scsi_device *dev, unsigned long cursec, unsigned int j,
1687 unsigned int ihdlr) {
1688 struct scsi_cmnd *SCpnt;
1689 struct mscp *cpp;
1690 unsigned int k, n, n_ready = 0, il[MAX_MAILBOXES];
1691
1692 for (k = 0; k < sh[j]->can_queue; k++) {
1693
1694 if (HD(j)->cp_stat[k] != READY && HD(j)->cp_stat[k] != IN_USE) continue;
1695
1696 cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
1697
1698 if (SCpnt->device != dev) continue;
1699
1700 if (HD(j)->cp_stat[k] == IN_USE) return;
1701
1702 il[n_ready++] = k;
1703 }
1704
1705 if (reorder(j, cursec, ihdlr, il, n_ready)) n_ready = 1;
1706
1707 for (n = 0; n < n_ready; n++) {
1708 k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt;
1709
1710 if (wait_on_busy(sh[j]->io_port, MAXLOOP)) {
Jeff Garzik017560f2005-10-24 18:04:36 -04001711 scmd_printk(KERN_INFO, SCpnt,
1712 "%s, pid %ld, mbox %d, adapter"
1713 " busy, will abort.\n", (ihdlr ? "ihdlr" : "qcomm"),
Matthew Wilcox12a44162007-09-18 19:54:43 -06001714 SCpnt->serial_number, k);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001715 HD(j)->cp_stat[k] = ABORTING;
1716 continue;
1717 }
1718
1719 outl(H2DEV(cpp->cp_dma_addr), sh[j]->io_port + REG_OGM);
1720 outb(CMD_OGM_INTR, sh[j]->io_port + REG_LCL_INTR);
1721 HD(j)->cp_stat[k] = IN_USE;
1722 }
1723
1724}
1725
Jeff Garzike19166d2008-04-18 19:22:52 -04001726static irqreturn_t ihdlr(unsigned int j)
1727{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001728 struct scsi_cmnd *SCpnt;
1729 unsigned int i, k, c, status, tstatus, reg, ret;
1730 struct mscp *spp, *cpp;
Jeff Garzike19166d2008-04-18 19:22:52 -04001731 int irq = sh[j]->irq;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001732
1733 /* Check if this board need to be serviced */
1734 if (!((reg = inb(sh[j]->io_port + REG_SYS_INTR)) & IRQ_ASSERTED)) goto none;
1735
1736 HD(j)->iocount++;
1737
1738 if (do_trace) printk("%s: ihdlr, enter, irq %d, count %d.\n", BN(j), irq,
1739 HD(j)->iocount);
1740
1741 /* Check if this board is still busy */
1742 if (wait_on_busy(sh[j]->io_port, 20 * MAXLOOP)) {
1743 outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR);
1744 printk("%s: ihdlr, busy timeout error, irq %d, reg 0x%x, count %d.\n",
1745 BN(j), irq, reg, HD(j)->iocount);
1746 goto none;
1747 }
1748
1749 ret = inl(sh[j]->io_port + REG_ICM);
1750
1751 /* Clear interrupt pending flag */
1752 outb(CMD_CLR_INTR, sh[j]->io_port + REG_SYS_INTR);
1753
1754 /* Find the mailbox to be serviced on this board */
1755 for (i = 0; i < sh[j]->can_queue; i++)
1756 if (H2DEV(HD(j)->cp[i].cp_dma_addr) == ret) break;
1757
1758 if (i >= sh[j]->can_queue)
1759 panic("%s: ihdlr, invalid mscp bus address %p, cp0 %p.\n", BN(j),
1760 (void *)ret, (void *)H2DEV(HD(j)->cp[0].cp_dma_addr));
1761
1762 cpp = &(HD(j)->cp[i]);
1763 spp = cpp;
1764
1765#if defined(DEBUG_GENERATE_ABORTS)
1766 if ((HD(j)->iocount > 500) && ((HD(j)->iocount % 500) < 3)) goto handled;
1767#endif
1768
1769 if (HD(j)->cp_stat[i] == IGNORE) {
1770 HD(j)->cp_stat[i] = FREE;
1771 goto handled;
1772 }
1773 else if (HD(j)->cp_stat[i] == LOCKED) {
1774 HD(j)->cp_stat[i] = FREE;
1775 printk("%s: ihdlr, mbox %d unlocked, count %d.\n", BN(j), i,
1776 HD(j)->iocount);
1777 goto handled;
1778 }
1779 else if (HD(j)->cp_stat[i] == FREE) {
1780 printk("%s: ihdlr, mbox %d is free, count %d.\n", BN(j), i,
1781 HD(j)->iocount);
1782 goto handled;
1783 }
1784 else if (HD(j)->cp_stat[i] == IN_RESET)
1785 printk("%s: ihdlr, mbox %d is in reset.\n", BN(j), i);
1786 else if (HD(j)->cp_stat[i] != IN_USE)
1787 panic("%s: ihdlr, mbox %d, invalid cp_stat: %d.\n",
1788 BN(j), i, HD(j)->cp_stat[i]);
1789
1790 HD(j)->cp_stat[i] = FREE;
1791 SCpnt = cpp->SCpnt;
1792
1793 if (SCpnt == NULL) panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", BN(j), i);
1794
1795 if (SCpnt->host_scribble == NULL)
1796 panic("%s: ihdlr, mbox %d, pid %ld, SCpnt %p garbled.\n", BN(j), i,
Matthew Wilcox12a44162007-09-18 19:54:43 -06001797 SCpnt->serial_number, SCpnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001798
1799 if (*(unsigned int *)SCpnt->host_scribble != i)
1800 panic("%s: ihdlr, mbox %d, pid %ld, index mismatch %d.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001801 BN(j), i, SCpnt->serial_number, *(unsigned int *)SCpnt->host_scribble);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001802
1803 sync_dma(i, j);
1804
1805 if (linked_comm && SCpnt->device->queue_depth > 2
1806 && TLDEV(SCpnt->device->type))
Tejun Heo83096eb2009-05-07 22:24:39 +09001807 flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, TRUE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001808
1809 tstatus = status_byte(spp->target_status);
1810
1811#if defined(DEBUG_GENERATE_ERRORS)
1812 if ((HD(j)->iocount > 500) && ((HD(j)->iocount % 200) < 2))
1813 spp->adapter_status = 0x01;
1814#endif
1815
1816 switch (spp->adapter_status) {
1817 case ASOK: /* status OK */
1818
1819 /* Forces a reset if a disk drive keeps returning BUSY */
1820 if (tstatus == BUSY && SCpnt->device->type != TYPE_TAPE)
1821 status = DID_ERROR << 16;
1822
1823 /* If there was a bus reset, redo operation on each target */
1824 else if (tstatus != GOOD && SCpnt->device->type == TYPE_DISK
Jeff Garzik422c0d62005-10-24 18:05:09 -04001825 && HD(j)->target_redo[scmd_id(SCpnt)][scmd_channel(SCpnt)])
Linus Torvalds1da177e2005-04-16 15:20:36 -07001826 status = DID_BUS_BUSY << 16;
1827
1828 /* Works around a flaw in scsi.c */
1829 else if (tstatus == CHECK_CONDITION
1830 && SCpnt->device->type == TYPE_DISK
1831 && (SCpnt->sense_buffer[2] & 0xf) == RECOVERED_ERROR)
1832 status = DID_BUS_BUSY << 16;
1833
1834 else
1835 status = DID_OK << 16;
1836
1837 if (tstatus == GOOD)
Jeff Garzik422c0d62005-10-24 18:05:09 -04001838 HD(j)->target_redo[scmd_id(SCpnt)][scmd_channel(SCpnt)] = FALSE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001839
1840 if (spp->target_status && SCpnt->device->type == TYPE_DISK &&
1841 (!(tstatus == CHECK_CONDITION && HD(j)->iocount <= 1000 &&
1842 (SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
Jeff Garzik422c0d62005-10-24 18:05:09 -04001843 scmd_printk(KERN_INFO, SCpnt,
1844 "ihdlr, pid %ld, target_status 0x%x, sense key 0x%x.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001845 SCpnt->serial_number, spp->target_status,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001846 SCpnt->sense_buffer[2]);
1847
Jeff Garzik422c0d62005-10-24 18:05:09 -04001848 HD(j)->target_to[scmd_id(SCpnt)][scmd_channel(SCpnt)] = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001849
Matthew Wilcox12a44162007-09-18 19:54:43 -06001850 if (HD(j)->last_retried_pid == SCpnt->serial_number) HD(j)->retries = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001851
1852 break;
1853 case ASST: /* Selection Time Out */
1854
Jeff Garzik422c0d62005-10-24 18:05:09 -04001855 if (HD(j)->target_to[scmd_id(SCpnt)][scmd_channel(SCpnt)] > 1)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001856 status = DID_ERROR << 16;
1857 else {
1858 status = DID_TIME_OUT << 16;
Jeff Garzik422c0d62005-10-24 18:05:09 -04001859 HD(j)->target_to[scmd_id(SCpnt)][scmd_channel(SCpnt)]++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001860 }
1861
1862 break;
1863
1864 /* Perform a limited number of internal retries */
1865 case 0x93: /* Unexpected bus free */
1866 case 0x94: /* Target bus phase sequence failure */
1867 case 0x96: /* Illegal SCSI command */
1868 case 0xa3: /* SCSI bus reset error */
1869
1870 for (c = 0; c <= sh[j]->max_channel; c++)
1871 for (k = 0; k < sh[j]->max_id; k++)
1872 HD(j)->target_redo[k][c] = TRUE;
1873
1874
1875 case 0x92: /* Data over/under-run */
1876
1877 if (SCpnt->device->type != TYPE_TAPE
1878 && HD(j)->retries < MAX_INTERNAL_RETRIES) {
1879
1880#if defined(DID_SOFT_ERROR)
1881 status = DID_SOFT_ERROR << 16;
1882#else
1883 status = DID_BUS_BUSY << 16;
1884#endif
1885
1886 HD(j)->retries++;
Matthew Wilcox12a44162007-09-18 19:54:43 -06001887 HD(j)->last_retried_pid = SCpnt->serial_number;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001888 }
1889 else
1890 status = DID_ERROR << 16;
1891
1892 break;
1893 case 0x01: /* Invalid command */
1894 case 0x02: /* Invalid parameters */
1895 case 0x03: /* Invalid data list */
1896 case 0x84: /* SCSI bus abort error */
1897 case 0x9b: /* Auto request sense error */
1898 case 0x9f: /* Unexpected command complete message error */
1899 case 0xff: /* Invalid parameter in the S/G list */
1900 default:
1901 status = DID_ERROR << 16;
1902 break;
1903 }
1904
1905 SCpnt->result = status | spp->target_status;
1906
1907#if defined(DEBUG_INTERRUPT)
1908 if (SCpnt->result || do_trace)
1909#else
1910 if ((spp->adapter_status != ASOK && HD(j)->iocount > 1000) ||
1911 (spp->adapter_status != ASOK &&
1912 spp->adapter_status != ASST && HD(j)->iocount <= 1000) ||
1913 do_trace || msg_byte(spp->target_status))
1914#endif
Jeff Garzik017560f2005-10-24 18:04:36 -04001915 scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"\
1916 " pid %ld, reg 0x%x, count %d.\n",
Matthew Wilcox12a44162007-09-18 19:54:43 -06001917 i, spp->adapter_status, spp->target_status, SCpnt->serial_number,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001918 reg, HD(j)->iocount);
1919
1920 unmap_dma(i, j);
1921
1922 /* Set the command state to inactive */
1923 SCpnt->host_scribble = NULL;
1924
1925 SCpnt->scsi_done(SCpnt);
1926
1927 if (do_trace) printk("%s: ihdlr, exit, irq %d, count %d.\n", BN(j), irq,
1928 HD(j)->iocount);
1929
1930handled:
1931 return IRQ_HANDLED;
1932none:
1933 return IRQ_NONE;
1934}
1935
David Howells7d12e782006-10-05 14:55:46 +01001936static irqreturn_t do_interrupt_handler(int irq, void *shap) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001937 unsigned int j;
1938 unsigned long spin_flags;
1939 irqreturn_t ret;
1940
1941 /* Check if the interrupt must be processed by this handler */
1942 if ((j = (unsigned int)((char *)shap - sha)) >= num_boards) return IRQ_NONE;
1943
1944 spin_lock_irqsave(sh[j]->host_lock, spin_flags);
Jeff Garzike19166d2008-04-18 19:22:52 -04001945 ret = ihdlr(j);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001946 spin_unlock_irqrestore(sh[j]->host_lock, spin_flags);
1947 return ret;
1948}
1949
1950static int u14_34f_release(struct Scsi_Host *shpnt) {
1951 unsigned int i, j;
1952
1953 for (j = 0; sh[j] != NULL && sh[j] != shpnt; j++);
1954
Jesper Juhlc9475cb2005-11-07 01:01:26 -08001955 if (sh[j] == NULL)
1956 panic("%s: release, invalid Scsi_Host pointer.\n", driver_name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001957
1958 for (i = 0; i < sh[j]->can_queue; i++)
Jesper Juhlc9475cb2005-11-07 01:01:26 -08001959 kfree((&HD(j)->cp[i])->sglist);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001960
1961 for (i = 0; i < sh[j]->can_queue; i++)
1962 pci_unmap_single(HD(j)->pdev, HD(j)->cp[i].cp_dma_addr,
1963 sizeof(struct mscp), PCI_DMA_BIDIRECTIONAL);
1964
1965 free_irq(sh[j]->irq, &sha[j]);
1966
Jesper Juhlc9475cb2005-11-07 01:01:26 -08001967 if (sh[j]->dma_channel != NO_DMA)
1968 free_dma(sh[j]->dma_channel);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001969
1970 release_region(sh[j]->io_port, sh[j]->n_io_port);
1971 scsi_unregister(sh[j]);
1972 return FALSE;
1973}
1974
1975#include "scsi_module.c"
1976
1977#ifndef MODULE
1978__setup("u14-34f=", option_setup);
1979#endif /* end MODULE */