Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
Uwe Zeisberger | f30c226 | 2006-10-03 23:01:26 +0200 | [diff] [blame] | 2 | * sound/oss/sb_common.c |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3 | * |
| 4 | * Common routines for Sound Blaster compatible cards. |
| 5 | * |
| 6 | * |
| 7 | * Copyright (C) by Hannu Savolainen 1993-1997 |
| 8 | * |
| 9 | * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) |
| 10 | * Version 2 (June 1991). See the "COPYING" file distributed with this software |
| 11 | * for more info. |
| 12 | * |
| 13 | * |
| 14 | * Daniel J. Rodriksson: Modified sbintr to handle 8 and 16 bit interrupts |
| 15 | * for full duplex support ( only sb16 by now ) |
| 16 | * Rolf Fokkens: Added (BETA?) support for ES1887 chips. |
| 17 | * (fokkensr@vertis.nl) Which means: You can adjust the recording levels. |
| 18 | * |
| 19 | * 2000/01/18 - separated sb_card and sb_common - |
| 20 | * Jeff Garzik <jgarzik@pobox.com> |
| 21 | * |
| 22 | * 2000/09/18 - got rid of attach_uart401 |
| 23 | * Arnaldo Carvalho de Melo <acme@conectiva.com.br> |
| 24 | * |
| 25 | * 2001/01/26 - replaced CLI/STI with spinlocks |
| 26 | * Chris Rankin <rankinc@zipworld.com.au> |
| 27 | */ |
| 28 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 29 | #include <linux/init.h> |
| 30 | #include <linux/interrupt.h> |
| 31 | #include <linux/module.h> |
| 32 | #include <linux/delay.h> |
| 33 | #include <linux/spinlock.h> |
| 34 | |
| 35 | #include "sound_config.h" |
| 36 | #include "sound_firmware.h" |
| 37 | |
| 38 | #include "mpu401.h" |
| 39 | |
| 40 | #include "sb_mixer.h" |
| 41 | #include "sb.h" |
| 42 | #include "sb_ess.h" |
| 43 | |
| 44 | /* |
| 45 | * global module flag |
| 46 | */ |
| 47 | |
| 48 | int sb_be_quiet; |
| 49 | |
| 50 | static sb_devc *detected_devc; /* For communication from probe to init */ |
| 51 | static sb_devc *last_devc; /* For MPU401 initialization */ |
| 52 | |
| 53 | static unsigned char jazz_irq_bits[] = { |
| 54 | 0, 0, 2, 3, 0, 1, 0, 4, 0, 2, 5, 0, 0, 0, 0, 6 |
| 55 | }; |
| 56 | |
| 57 | static unsigned char jazz_dma_bits[] = { |
| 58 | 0, 1, 0, 2, 0, 3, 0, 4 |
| 59 | }; |
| 60 | |
| 61 | void *smw_free; |
| 62 | |
| 63 | /* |
| 64 | * Jazz16 chipset specific control variables |
| 65 | */ |
| 66 | |
| 67 | static int jazz16_base; /* Not detected */ |
| 68 | static unsigned char jazz16_bits; /* I/O relocation bits */ |
| 69 | static DEFINE_SPINLOCK(jazz16_lock); |
| 70 | |
| 71 | /* |
| 72 | * Logitech Soundman Wave specific initialization code |
| 73 | */ |
| 74 | |
| 75 | #ifdef SMW_MIDI0001_INCLUDED |
| 76 | #include "smw-midi0001.h" |
| 77 | #else |
| 78 | static unsigned char *smw_ucode; |
| 79 | static int smw_ucodeLen; |
| 80 | |
| 81 | #endif |
| 82 | |
| 83 | static sb_devc *last_sb; /* Last sb loaded */ |
| 84 | |
| 85 | int sb_dsp_command(sb_devc * devc, unsigned char val) |
| 86 | { |
| 87 | int i; |
| 88 | unsigned long limit; |
| 89 | |
| 90 | limit = jiffies + HZ / 10; /* Timeout */ |
| 91 | |
| 92 | /* |
| 93 | * Note! the i<500000 is an emergency exit. The sb_dsp_command() is sometimes |
| 94 | * called while interrupts are disabled. This means that the timer is |
| 95 | * disabled also. However the timeout situation is a abnormal condition. |
| 96 | * Normally the DSP should be ready to accept commands after just couple of |
| 97 | * loops. |
| 98 | */ |
| 99 | |
| 100 | for (i = 0; i < 500000 && (limit-jiffies)>0; i++) |
| 101 | { |
| 102 | if ((inb(DSP_STATUS) & 0x80) == 0) |
| 103 | { |
| 104 | outb((val), DSP_COMMAND); |
| 105 | return 1; |
| 106 | } |
| 107 | } |
| 108 | printk(KERN_WARNING "Sound Blaster: DSP command(%x) timeout.\n", val); |
| 109 | return 0; |
| 110 | } |
| 111 | |
| 112 | int sb_dsp_get_byte(sb_devc * devc) |
| 113 | { |
| 114 | int i; |
| 115 | |
| 116 | for (i = 1000; i; i--) |
| 117 | { |
| 118 | if (inb(DSP_DATA_AVAIL) & 0x80) |
| 119 | return inb(DSP_READ); |
| 120 | } |
| 121 | return 0xffff; |
| 122 | } |
| 123 | |
| 124 | static void sb_intr (sb_devc *devc) |
| 125 | { |
| 126 | int status; |
| 127 | unsigned char src = 0xff; |
| 128 | |
| 129 | if (devc->model == MDL_SB16) |
| 130 | { |
| 131 | src = sb_getmixer(devc, IRQ_STAT); /* Interrupt source register */ |
| 132 | |
| 133 | if (src & 4) /* MPU401 interrupt */ |
| 134 | if(devc->midi_irq_cookie) |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 135 | uart401intr(devc->irq, devc->midi_irq_cookie); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 136 | |
| 137 | if (!(src & 3)) |
| 138 | return; /* Not a DSP interrupt */ |
| 139 | } |
| 140 | if (devc->intr_active && (!devc->fullduplex || (src & 0x01))) |
| 141 | { |
| 142 | switch (devc->irq_mode) |
| 143 | { |
| 144 | case IMODE_OUTPUT: |
| 145 | DMAbuf_outputintr(devc->dev, 1); |
| 146 | break; |
| 147 | |
| 148 | case IMODE_INPUT: |
| 149 | DMAbuf_inputintr(devc->dev); |
| 150 | break; |
| 151 | |
| 152 | case IMODE_INIT: |
| 153 | break; |
| 154 | |
| 155 | case IMODE_MIDI: |
| 156 | sb_midi_interrupt(devc); |
| 157 | break; |
| 158 | |
| 159 | default: |
| 160 | /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ |
| 161 | ; |
| 162 | } |
| 163 | } |
| 164 | else if (devc->intr_active_16 && (src & 0x02)) |
| 165 | { |
| 166 | switch (devc->irq_mode_16) |
| 167 | { |
| 168 | case IMODE_OUTPUT: |
| 169 | DMAbuf_outputintr(devc->dev, 1); |
| 170 | break; |
| 171 | |
| 172 | case IMODE_INPUT: |
| 173 | DMAbuf_inputintr(devc->dev); |
| 174 | break; |
| 175 | |
| 176 | case IMODE_INIT: |
| 177 | break; |
| 178 | |
| 179 | default: |
| 180 | /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ |
| 181 | ; |
| 182 | } |
| 183 | } |
| 184 | /* |
| 185 | * Acknowledge interrupts |
| 186 | */ |
| 187 | |
| 188 | if (src & 0x01) |
| 189 | status = inb(DSP_DATA_AVAIL); |
| 190 | |
| 191 | if (devc->model == MDL_SB16 && src & 0x02) |
| 192 | status = inb(DSP_DATA_AVL16); |
| 193 | } |
| 194 | |
| 195 | static void pci_intr(sb_devc *devc) |
| 196 | { |
| 197 | int src = inb(devc->pcibase+0x1A); |
| 198 | src&=3; |
| 199 | if(src) |
| 200 | sb_intr(devc); |
| 201 | } |
| 202 | |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 203 | static irqreturn_t sbintr(int irq, void *dev_id) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 204 | { |
| 205 | sb_devc *devc = dev_id; |
| 206 | |
| 207 | devc->irq_ok = 1; |
| 208 | |
| 209 | switch (devc->model) { |
| 210 | case MDL_ESSPCI: |
| 211 | pci_intr (devc); |
| 212 | break; |
| 213 | |
| 214 | case MDL_ESS: |
| 215 | ess_intr (devc); |
| 216 | break; |
| 217 | default: |
| 218 | sb_intr (devc); |
| 219 | break; |
| 220 | } |
| 221 | return IRQ_HANDLED; |
| 222 | } |
| 223 | |
| 224 | int sb_dsp_reset(sb_devc * devc) |
| 225 | { |
| 226 | int loopc; |
| 227 | |
| 228 | DEB(printk("Entered sb_dsp_reset()\n")); |
| 229 | |
| 230 | if (devc->model == MDL_ESS) return ess_dsp_reset (devc); |
| 231 | |
| 232 | /* This is only for non-ESS chips */ |
| 233 | |
| 234 | outb(1, DSP_RESET); |
| 235 | |
| 236 | udelay(10); |
| 237 | outb(0, DSP_RESET); |
| 238 | udelay(30); |
| 239 | |
| 240 | for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++); |
| 241 | |
| 242 | if (inb(DSP_READ) != 0xAA) |
| 243 | { |
| 244 | DDB(printk("sb: No response to RESET\n")); |
| 245 | return 0; /* Sorry */ |
| 246 | } |
| 247 | |
| 248 | DEB(printk("sb_dsp_reset() OK\n")); |
| 249 | |
| 250 | return 1; |
| 251 | } |
| 252 | |
| 253 | static void dsp_get_vers(sb_devc * devc) |
| 254 | { |
| 255 | int i; |
| 256 | |
| 257 | unsigned long flags; |
| 258 | |
| 259 | DDB(printk("Entered dsp_get_vers()\n")); |
| 260 | spin_lock_irqsave(&devc->lock, flags); |
| 261 | devc->major = devc->minor = 0; |
| 262 | sb_dsp_command(devc, 0xe1); /* Get version */ |
| 263 | |
| 264 | for (i = 100000; i; i--) |
| 265 | { |
| 266 | if (inb(DSP_DATA_AVAIL) & 0x80) |
| 267 | { |
| 268 | if (devc->major == 0) |
| 269 | devc->major = inb(DSP_READ); |
| 270 | else |
| 271 | { |
| 272 | devc->minor = inb(DSP_READ); |
| 273 | break; |
| 274 | } |
| 275 | } |
| 276 | } |
| 277 | spin_unlock_irqrestore(&devc->lock, flags); |
| 278 | DDB(printk("DSP version %d.%02d\n", devc->major, devc->minor)); |
| 279 | } |
| 280 | |
| 281 | static int sb16_set_dma_hw(sb_devc * devc) |
| 282 | { |
| 283 | int bits; |
| 284 | |
| 285 | if (devc->dma8 != 0 && devc->dma8 != 1 && devc->dma8 != 3) |
| 286 | { |
| 287 | printk(KERN_ERR "SB16: Invalid 8 bit DMA (%d)\n", devc->dma8); |
| 288 | return 0; |
| 289 | } |
| 290 | bits = (1 << devc->dma8); |
| 291 | |
| 292 | if (devc->dma16 >= 5 && devc->dma16 <= 7) |
| 293 | bits |= (1 << devc->dma16); |
| 294 | |
| 295 | sb_setmixer(devc, DMA_NR, bits); |
| 296 | return 1; |
| 297 | } |
| 298 | |
| 299 | static void sb16_set_mpu_port(sb_devc * devc, struct address_info *hw_config) |
| 300 | { |
| 301 | /* |
| 302 | * This routine initializes new MIDI port setup register of SB Vibra (CT2502). |
| 303 | */ |
| 304 | unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06; |
| 305 | |
| 306 | switch (hw_config->io_base) |
| 307 | { |
| 308 | case 0x300: |
| 309 | sb_setmixer(devc, 0x84, bits | 0x04); |
| 310 | break; |
| 311 | |
| 312 | case 0x330: |
| 313 | sb_setmixer(devc, 0x84, bits | 0x00); |
| 314 | break; |
| 315 | |
| 316 | default: |
| 317 | sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */ |
| 318 | printk(KERN_ERR "SB16: Invalid MIDI I/O port %x\n", hw_config->io_base); |
| 319 | } |
| 320 | } |
| 321 | |
| 322 | static int sb16_set_irq_hw(sb_devc * devc, int level) |
| 323 | { |
| 324 | int ival; |
| 325 | |
| 326 | switch (level) |
| 327 | { |
| 328 | case 5: |
| 329 | ival = 2; |
| 330 | break; |
| 331 | case 7: |
| 332 | ival = 4; |
| 333 | break; |
| 334 | case 9: |
| 335 | ival = 1; |
| 336 | break; |
| 337 | case 10: |
| 338 | ival = 8; |
| 339 | break; |
| 340 | default: |
| 341 | printk(KERN_ERR "SB16: Invalid IRQ%d\n", level); |
| 342 | return 0; |
| 343 | } |
| 344 | sb_setmixer(devc, IRQ_NR, ival); |
| 345 | return 1; |
| 346 | } |
| 347 | |
| 348 | static void relocate_Jazz16(sb_devc * devc, struct address_info *hw_config) |
| 349 | { |
| 350 | unsigned char bits = 0; |
| 351 | unsigned long flags; |
| 352 | |
| 353 | if (jazz16_base != 0 && jazz16_base != hw_config->io_base) |
| 354 | return; |
| 355 | |
| 356 | switch (hw_config->io_base) |
| 357 | { |
| 358 | case 0x220: |
| 359 | bits = 1; |
| 360 | break; |
| 361 | case 0x240: |
| 362 | bits = 2; |
| 363 | break; |
| 364 | case 0x260: |
| 365 | bits = 3; |
| 366 | break; |
| 367 | default: |
| 368 | return; |
| 369 | } |
| 370 | bits = jazz16_bits = bits << 5; |
| 371 | jazz16_base = hw_config->io_base; |
| 372 | |
| 373 | /* |
| 374 | * Magic wake up sequence by writing to 0x201 (aka Joystick port) |
| 375 | */ |
| 376 | spin_lock_irqsave(&jazz16_lock, flags); |
| 377 | outb((0xAF), 0x201); |
| 378 | outb((0x50), 0x201); |
| 379 | outb((bits), 0x201); |
| 380 | spin_unlock_irqrestore(&jazz16_lock, flags); |
| 381 | } |
| 382 | |
| 383 | static int init_Jazz16(sb_devc * devc, struct address_info *hw_config) |
| 384 | { |
| 385 | char name[100]; |
| 386 | /* |
| 387 | * First try to check that the card has Jazz16 chip. It identifies itself |
| 388 | * by returning 0x12 as response to DSP command 0xfa. |
| 389 | */ |
| 390 | |
| 391 | if (!sb_dsp_command(devc, 0xfa)) |
| 392 | return 0; |
| 393 | |
| 394 | if (sb_dsp_get_byte(devc) != 0x12) |
| 395 | return 0; |
| 396 | |
| 397 | /* |
| 398 | * OK so far. Now configure the IRQ and DMA channel used by the card. |
| 399 | */ |
| 400 | if (hw_config->irq < 1 || hw_config->irq > 15 || jazz_irq_bits[hw_config->irq] == 0) |
| 401 | { |
| 402 | printk(KERN_ERR "Jazz16: Invalid interrupt (IRQ%d)\n", hw_config->irq); |
| 403 | return 0; |
| 404 | } |
| 405 | if (hw_config->dma < 0 || hw_config->dma > 3 || jazz_dma_bits[hw_config->dma] == 0) |
| 406 | { |
| 407 | printk(KERN_ERR "Jazz16: Invalid 8 bit DMA (DMA%d)\n", hw_config->dma); |
| 408 | return 0; |
| 409 | } |
| 410 | if (hw_config->dma2 < 0) |
| 411 | { |
| 412 | printk(KERN_ERR "Jazz16: No 16 bit DMA channel defined\n"); |
| 413 | return 0; |
| 414 | } |
| 415 | if (hw_config->dma2 < 5 || hw_config->dma2 > 7 || jazz_dma_bits[hw_config->dma2] == 0) |
| 416 | { |
| 417 | printk(KERN_ERR "Jazz16: Invalid 16 bit DMA (DMA%d)\n", hw_config->dma2); |
| 418 | return 0; |
| 419 | } |
| 420 | devc->dma16 = hw_config->dma2; |
| 421 | |
| 422 | if (!sb_dsp_command(devc, 0xfb)) |
| 423 | return 0; |
| 424 | |
| 425 | if (!sb_dsp_command(devc, jazz_dma_bits[hw_config->dma] | |
| 426 | (jazz_dma_bits[hw_config->dma2] << 4))) |
| 427 | return 0; |
| 428 | |
| 429 | if (!sb_dsp_command(devc, jazz_irq_bits[hw_config->irq])) |
| 430 | return 0; |
| 431 | |
| 432 | /* |
| 433 | * Now we have configured a standard Jazz16 device. |
| 434 | */ |
| 435 | devc->model = MDL_JAZZ; |
| 436 | strcpy(name, "Jazz16"); |
| 437 | |
| 438 | hw_config->name = "Jazz16"; |
| 439 | devc->caps |= SB_NO_MIDI; |
| 440 | return 1; |
| 441 | } |
| 442 | |
| 443 | static void relocate_ess1688(sb_devc * devc) |
| 444 | { |
| 445 | unsigned char bits; |
| 446 | |
| 447 | switch (devc->base) |
| 448 | { |
| 449 | case 0x220: |
| 450 | bits = 0x04; |
| 451 | break; |
| 452 | case 0x230: |
| 453 | bits = 0x05; |
| 454 | break; |
| 455 | case 0x240: |
| 456 | bits = 0x06; |
| 457 | break; |
| 458 | case 0x250: |
| 459 | bits = 0x07; |
| 460 | break; |
| 461 | default: |
| 462 | return; /* Wrong port */ |
| 463 | } |
| 464 | |
| 465 | DDB(printk("Doing ESS1688 address selection\n")); |
| 466 | |
| 467 | /* |
| 468 | * ES1688 supports two alternative ways for software address config. |
| 469 | * First try the so called Read-Sequence-Key method. |
| 470 | */ |
| 471 | |
| 472 | /* Reset the sequence logic */ |
| 473 | inb(0x229); |
| 474 | inb(0x229); |
| 475 | inb(0x229); |
| 476 | |
| 477 | /* Perform the read sequence */ |
| 478 | inb(0x22b); |
| 479 | inb(0x229); |
| 480 | inb(0x22b); |
| 481 | inb(0x229); |
| 482 | inb(0x229); |
| 483 | inb(0x22b); |
| 484 | inb(0x229); |
| 485 | |
| 486 | /* Select the base address by reading from it. Then probe using the port. */ |
| 487 | inb(devc->base); |
| 488 | if (sb_dsp_reset(devc)) /* Bingo */ |
| 489 | return; |
| 490 | |
| 491 | #if 0 /* This causes system lockups (Nokia 386/25 at least) */ |
| 492 | /* |
| 493 | * The last resort is the system control register method. |
| 494 | */ |
| 495 | |
| 496 | outb((0x00), 0xfb); /* 0xFB is the unlock register */ |
| 497 | outb((0x00), 0xe0); /* Select index 0 */ |
| 498 | outb((bits), 0xe1); /* Write the config bits */ |
| 499 | outb((0x00), 0xf9); /* 0xFB is the lock register */ |
| 500 | #endif |
| 501 | } |
| 502 | |
| 503 | int sb_dsp_detect(struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo) |
| 504 | { |
| 505 | sb_devc sb_info; |
| 506 | sb_devc *devc = &sb_info; |
| 507 | |
| 508 | memset((char *) &sb_info, 0, sizeof(sb_info)); /* Zero everything */ |
| 509 | |
| 510 | /* Copy module options in place */ |
| 511 | if(sbmo) memcpy(&devc->sbmo, sbmo, sizeof(struct sb_module_options)); |
| 512 | |
| 513 | sb_info.my_mididev = -1; |
| 514 | sb_info.my_mixerdev = -1; |
| 515 | sb_info.dev = -1; |
| 516 | |
| 517 | /* |
| 518 | * Initialize variables |
| 519 | */ |
| 520 | |
| 521 | DDB(printk("sb_dsp_detect(%x) entered\n", hw_config->io_base)); |
| 522 | |
| 523 | spin_lock_init(&devc->lock); |
| 524 | devc->type = hw_config->card_subtype; |
| 525 | |
| 526 | devc->base = hw_config->io_base; |
| 527 | devc->irq = hw_config->irq; |
| 528 | devc->dma8 = hw_config->dma; |
| 529 | |
| 530 | devc->dma16 = -1; |
| 531 | devc->pcibase = pciio; |
| 532 | |
| 533 | if(pci == SB_PCI_ESSMAESTRO) |
| 534 | { |
| 535 | devc->model = MDL_ESSPCI; |
| 536 | devc->caps |= SB_PCI_IRQ; |
| 537 | hw_config->driver_use_1 |= SB_PCI_IRQ; |
| 538 | hw_config->card_subtype = MDL_ESSPCI; |
| 539 | } |
| 540 | |
| 541 | if(pci == SB_PCI_YAMAHA) |
| 542 | { |
| 543 | devc->model = MDL_YMPCI; |
| 544 | devc->caps |= SB_PCI_IRQ; |
| 545 | hw_config->driver_use_1 |= SB_PCI_IRQ; |
| 546 | hw_config->card_subtype = MDL_YMPCI; |
| 547 | |
| 548 | printk("Yamaha PCI mode.\n"); |
| 549 | } |
| 550 | |
| 551 | if (devc->sbmo.acer) |
| 552 | { |
| 553 | unsigned long flags; |
| 554 | |
| 555 | spin_lock_irqsave(&devc->lock, flags); |
| 556 | inb(devc->base + 0x09); |
| 557 | inb(devc->base + 0x09); |
| 558 | inb(devc->base + 0x09); |
| 559 | inb(devc->base + 0x0b); |
| 560 | inb(devc->base + 0x09); |
| 561 | inb(devc->base + 0x0b); |
| 562 | inb(devc->base + 0x09); |
| 563 | inb(devc->base + 0x09); |
| 564 | inb(devc->base + 0x0b); |
| 565 | inb(devc->base + 0x09); |
| 566 | inb(devc->base + 0x00); |
| 567 | spin_unlock_irqrestore(&devc->lock, flags); |
| 568 | } |
| 569 | /* |
| 570 | * Detect the device |
| 571 | */ |
| 572 | |
| 573 | if (sb_dsp_reset(devc)) |
| 574 | dsp_get_vers(devc); |
| 575 | else |
| 576 | devc->major = 0; |
| 577 | |
| 578 | if (devc->type == 0 || devc->type == MDL_JAZZ || devc->type == MDL_SMW) |
| 579 | if (devc->major == 0 || (devc->major == 3 && devc->minor == 1)) |
| 580 | relocate_Jazz16(devc, hw_config); |
| 581 | |
| 582 | if (devc->major == 0 && (devc->type == MDL_ESS || devc->type == 0)) |
| 583 | relocate_ess1688(devc); |
| 584 | |
| 585 | if (!sb_dsp_reset(devc)) |
| 586 | { |
| 587 | DDB(printk("SB reset failed\n")); |
| 588 | #ifdef MODULE |
| 589 | printk(KERN_INFO "sb: dsp reset failed.\n"); |
| 590 | #endif |
| 591 | return 0; |
| 592 | } |
| 593 | if (devc->major == 0) |
| 594 | dsp_get_vers(devc); |
| 595 | |
| 596 | if (devc->major == 3 && devc->minor == 1) |
| 597 | { |
| 598 | if (devc->type == MDL_AZTECH) /* SG Washington? */ |
| 599 | { |
| 600 | if (sb_dsp_command(devc, 0x09)) |
| 601 | if (sb_dsp_command(devc, 0x00)) /* Enter WSS mode */ |
| 602 | { |
| 603 | int i; |
| 604 | |
| 605 | /* Have some delay */ |
| 606 | for (i = 0; i < 10000; i++) |
| 607 | inb(DSP_DATA_AVAIL); |
| 608 | devc->caps = SB_NO_AUDIO | SB_NO_MIDI; /* Mixer only */ |
| 609 | devc->model = MDL_AZTECH; |
| 610 | } |
| 611 | } |
| 612 | } |
| 613 | |
| 614 | if(devc->type == MDL_ESSPCI) |
| 615 | devc->model = MDL_ESSPCI; |
| 616 | |
| 617 | if(devc->type == MDL_YMPCI) |
| 618 | { |
| 619 | printk("YMPCI selected\n"); |
| 620 | devc->model = MDL_YMPCI; |
| 621 | } |
| 622 | |
| 623 | /* |
| 624 | * Save device information for sb_dsp_init() |
| 625 | */ |
| 626 | |
| 627 | |
| 628 | detected_devc = (sb_devc *)kmalloc(sizeof(sb_devc), GFP_KERNEL); |
| 629 | if (detected_devc == NULL) |
| 630 | { |
| 631 | printk(KERN_ERR "sb: Can't allocate memory for device information\n"); |
| 632 | return 0; |
| 633 | } |
| 634 | memcpy(detected_devc, devc, sizeof(sb_devc)); |
| 635 | MDB(printk(KERN_INFO "SB %d.%02d detected OK (%x)\n", devc->major, devc->minor, hw_config->io_base)); |
| 636 | return 1; |
| 637 | } |
| 638 | |
| 639 | int sb_dsp_init(struct address_info *hw_config, struct module *owner) |
| 640 | { |
| 641 | sb_devc *devc; |
| 642 | char name[100]; |
| 643 | extern int sb_be_quiet; |
| 644 | int mixer22, mixer30; |
| 645 | |
| 646 | /* |
| 647 | * Check if we had detected a SB device earlier |
| 648 | */ |
| 649 | DDB(printk("sb_dsp_init(%x) entered\n", hw_config->io_base)); |
| 650 | name[0] = 0; |
| 651 | |
| 652 | if (detected_devc == NULL) |
| 653 | { |
| 654 | MDB(printk("No detected device\n")); |
| 655 | return 0; |
| 656 | } |
| 657 | devc = detected_devc; |
| 658 | detected_devc = NULL; |
| 659 | |
| 660 | if (devc->base != hw_config->io_base) |
| 661 | { |
| 662 | DDB(printk("I/O port mismatch\n")); |
| 663 | release_region(devc->base, 16); |
| 664 | return 0; |
| 665 | } |
| 666 | /* |
| 667 | * Now continue initialization of the device |
| 668 | */ |
| 669 | |
| 670 | devc->caps = hw_config->driver_use_1; |
| 671 | |
| 672 | if (!((devc->caps & SB_NO_AUDIO) && (devc->caps & SB_NO_MIDI)) && hw_config->irq > 0) |
| 673 | { /* IRQ setup */ |
| 674 | |
| 675 | /* |
| 676 | * ESS PCI cards do shared PCI IRQ stuff. Since they |
| 677 | * will get shared PCI irq lines we must cope. |
| 678 | */ |
| 679 | |
Thomas Gleixner | 65ca68b | 2006-07-01 19:29:46 -0700 | [diff] [blame] | 680 | int i=(devc->caps&SB_PCI_IRQ)?IRQF_SHARED:0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 681 | |
| 682 | if (request_irq(hw_config->irq, sbintr, i, "soundblaster", devc) < 0) |
| 683 | { |
| 684 | printk(KERN_ERR "SB: Can't allocate IRQ%d\n", hw_config->irq); |
| 685 | release_region(devc->base, 16); |
| 686 | return 0; |
| 687 | } |
| 688 | devc->irq_ok = 0; |
| 689 | |
| 690 | if (devc->major == 4) |
| 691 | if (!sb16_set_irq_hw(devc, devc->irq)) /* Unsupported IRQ */ |
| 692 | { |
| 693 | free_irq(devc->irq, devc); |
| 694 | release_region(devc->base, 16); |
| 695 | return 0; |
| 696 | } |
| 697 | if ((devc->type == 0 || devc->type == MDL_ESS) && |
| 698 | devc->major == 3 && devc->minor == 1) |
| 699 | { /* Handle various chipsets which claim they are SB Pro compatible */ |
| 700 | if ((devc->type != 0 && devc->type != MDL_ESS) || |
| 701 | !ess_init(devc, hw_config)) |
| 702 | { |
| 703 | if ((devc->type != 0 && devc->type != MDL_JAZZ && |
| 704 | devc->type != MDL_SMW) || !init_Jazz16(devc, hw_config)) |
| 705 | { |
| 706 | DDB(printk("This is a genuine SB Pro\n")); |
| 707 | } |
| 708 | } |
| 709 | } |
| 710 | if (devc->major == 4 && devc->minor <= 11 ) /* Won't work */ |
| 711 | devc->irq_ok = 1; |
| 712 | else |
| 713 | { |
| 714 | int n; |
| 715 | |
| 716 | for (n = 0; n < 3 && devc->irq_ok == 0; n++) |
| 717 | { |
| 718 | if (sb_dsp_command(devc, 0xf2)) /* Cause interrupt immediately */ |
| 719 | { |
| 720 | int i; |
| 721 | |
| 722 | for (i = 0; !devc->irq_ok && i < 10000; i++); |
| 723 | } |
| 724 | } |
| 725 | if (!devc->irq_ok) |
| 726 | printk(KERN_WARNING "sb: Interrupt test on IRQ%d failed - Probable IRQ conflict\n", devc->irq); |
| 727 | else |
| 728 | { |
| 729 | DDB(printk("IRQ test OK (IRQ%d)\n", devc->irq)); |
| 730 | } |
| 731 | } |
| 732 | } /* IRQ setup */ |
| 733 | |
| 734 | last_sb = devc; |
| 735 | |
| 736 | switch (devc->major) |
| 737 | { |
| 738 | case 1: /* SB 1.0 or 1.5 */ |
| 739 | devc->model = hw_config->card_subtype = MDL_SB1; |
| 740 | break; |
| 741 | |
| 742 | case 2: /* SB 2.x */ |
| 743 | if (devc->minor == 0) |
| 744 | devc->model = hw_config->card_subtype = MDL_SB2; |
| 745 | else |
| 746 | devc->model = hw_config->card_subtype = MDL_SB201; |
| 747 | break; |
| 748 | |
| 749 | case 3: /* SB Pro and most clones */ |
| 750 | switch (devc->model) { |
| 751 | case 0: |
| 752 | devc->model = hw_config->card_subtype = MDL_SBPRO; |
| 753 | if (hw_config->name == NULL) |
| 754 | hw_config->name = "Sound Blaster Pro (8 BIT ONLY)"; |
| 755 | break; |
| 756 | case MDL_ESS: |
| 757 | ess_dsp_init(devc, hw_config); |
| 758 | break; |
| 759 | } |
| 760 | break; |
| 761 | |
| 762 | case 4: |
| 763 | devc->model = hw_config->card_subtype = MDL_SB16; |
| 764 | /* |
| 765 | * ALS007 and ALS100 return DSP version 4.2 and have 2 post-reset !=0 |
| 766 | * registers at 0x3c and 0x4c (output ctrl registers on ALS007) whereas |
| 767 | * a "standard" SB16 doesn't have a register at 0x4c. ALS100 actively |
| 768 | * updates register 0x22 whenever 0x30 changes, as per the SB16 spec. |
| 769 | * Since ALS007 doesn't, this can be used to differentiate the 2 cards. |
| 770 | */ |
| 771 | if ((devc->minor == 2) && sb_getmixer(devc,0x3c) && sb_getmixer(devc,0x4c)) |
| 772 | { |
| 773 | mixer30 = sb_getmixer(devc,0x30); |
| 774 | sb_setmixer(devc,0x22,(mixer22=sb_getmixer(devc,0x22)) & 0x0f); |
| 775 | sb_setmixer(devc,0x30,0xff); |
| 776 | /* ALS100 will force 0x30 to 0xf8 like SB16; ALS007 will allow 0xff. */ |
| 777 | /* Register 0x22 & 0xf0 on ALS100 == 0xf0; on ALS007 it == 0x10. */ |
| 778 | if ((sb_getmixer(devc,0x30) != 0xff) || ((sb_getmixer(devc,0x22) & 0xf0) != 0x10)) |
| 779 | { |
| 780 | devc->submodel = SUBMDL_ALS100; |
| 781 | if (hw_config->name == NULL) |
| 782 | hw_config->name = "Sound Blaster 16 (ALS-100)"; |
| 783 | } |
| 784 | else |
| 785 | { |
| 786 | sb_setmixer(devc,0x3c,0x1f); /* Enable all inputs */ |
| 787 | sb_setmixer(devc,0x4c,0x1f); |
| 788 | sb_setmixer(devc,0x22,mixer22); /* Restore 0x22 to original value */ |
| 789 | devc->submodel = SUBMDL_ALS007; |
| 790 | if (hw_config->name == NULL) |
| 791 | hw_config->name = "Sound Blaster 16 (ALS-007)"; |
| 792 | } |
| 793 | sb_setmixer(devc,0x30,mixer30); |
| 794 | } |
| 795 | else if (hw_config->name == NULL) |
| 796 | hw_config->name = "Sound Blaster 16"; |
| 797 | |
| 798 | if (hw_config->dma2 == -1) |
| 799 | devc->dma16 = devc->dma8; |
| 800 | else if (hw_config->dma2 < 5 || hw_config->dma2 > 7) |
| 801 | { |
| 802 | printk(KERN_WARNING "SB16: Bad or missing 16 bit DMA channel\n"); |
| 803 | devc->dma16 = devc->dma8; |
| 804 | } |
| 805 | else |
| 806 | devc->dma16 = hw_config->dma2; |
| 807 | |
| 808 | if(!sb16_set_dma_hw(devc)) { |
| 809 | free_irq(devc->irq, devc); |
| 810 | release_region(hw_config->io_base, 16); |
| 811 | return 0; |
| 812 | } |
| 813 | |
| 814 | devc->caps |= SB_NO_MIDI; |
| 815 | } |
| 816 | |
| 817 | if (!(devc->caps & SB_NO_MIXER)) |
| 818 | if (devc->major == 3 || devc->major == 4) |
| 819 | sb_mixer_init(devc, owner); |
| 820 | |
| 821 | if (!(devc->caps & SB_NO_MIDI)) |
| 822 | sb_dsp_midi_init(devc, owner); |
| 823 | |
| 824 | if (hw_config->name == NULL) |
| 825 | hw_config->name = "Sound Blaster (8 BIT/MONO ONLY)"; |
| 826 | |
| 827 | sprintf(name, "%s (%d.%02d)", hw_config->name, devc->major, devc->minor); |
| 828 | conf_printf(name, hw_config); |
| 829 | |
| 830 | /* |
| 831 | * Assuming that a sound card is Sound Blaster (compatible) is the most common |
| 832 | * configuration error and the mother of all problems. Usually sound cards |
| 833 | * emulate SB Pro but in addition they have a 16 bit native mode which should be |
| 834 | * used in Unix. See Readme.cards for more information about configuring OSS/Free |
| 835 | * properly. |
| 836 | */ |
| 837 | if (devc->model <= MDL_SBPRO) |
| 838 | { |
| 839 | if (devc->major == 3 && devc->minor != 1) /* "True" SB Pro should have v3.1 (rare ones may have 3.2). */ |
| 840 | { |
| 841 | printk(KERN_INFO "This sound card may not be fully Sound Blaster Pro compatible.\n"); |
| 842 | printk(KERN_INFO "In many cases there is another way to configure OSS so that\n"); |
| 843 | printk(KERN_INFO "it works properly with OSS (for example in 16 bit mode).\n"); |
| 844 | printk(KERN_INFO "Please ignore this message if you _really_ have a SB Pro.\n"); |
| 845 | } |
| 846 | else if (!sb_be_quiet && devc->model == MDL_SBPRO) |
| 847 | { |
| 848 | printk(KERN_INFO "SB DSP version is just %d.%02d which means that your card is\n", devc->major, devc->minor); |
| 849 | printk(KERN_INFO "several years old (8 bit only device) or alternatively the sound driver\n"); |
| 850 | printk(KERN_INFO "is incorrectly configured.\n"); |
| 851 | } |
| 852 | } |
| 853 | hw_config->card_subtype = devc->model; |
| 854 | hw_config->slots[0]=devc->dev; |
| 855 | last_devc = devc; /* For SB MPU detection */ |
| 856 | |
| 857 | if (!(devc->caps & SB_NO_AUDIO) && devc->dma8 >= 0) |
| 858 | { |
| 859 | if (sound_alloc_dma(devc->dma8, "SoundBlaster8")) |
| 860 | { |
| 861 | printk(KERN_WARNING "Sound Blaster: Can't allocate 8 bit DMA channel %d\n", devc->dma8); |
| 862 | } |
| 863 | if (devc->dma16 >= 0 && devc->dma16 != devc->dma8) |
| 864 | { |
| 865 | if (sound_alloc_dma(devc->dma16, "SoundBlaster16")) |
| 866 | printk(KERN_WARNING "Sound Blaster: can't allocate 16 bit DMA channel %d.\n", devc->dma16); |
| 867 | } |
| 868 | sb_audio_init(devc, name, owner); |
| 869 | hw_config->slots[0]=devc->dev; |
| 870 | } |
| 871 | else |
| 872 | { |
| 873 | MDB(printk("Sound Blaster: no audio devices found.\n")); |
| 874 | } |
| 875 | return 1; |
| 876 | } |
| 877 | |
| 878 | /* if (sbmpu) below we allow mpu401 to manage the midi devs |
| 879 | otherwise we have to unload them. (Andrzej Krzysztofowicz) */ |
| 880 | |
| 881 | void sb_dsp_unload(struct address_info *hw_config, int sbmpu) |
| 882 | { |
| 883 | sb_devc *devc; |
| 884 | |
| 885 | devc = audio_devs[hw_config->slots[0]]->devc; |
| 886 | |
| 887 | if (devc && devc->base == hw_config->io_base) |
| 888 | { |
| 889 | if ((devc->model & MDL_ESS) && devc->pcibase) |
| 890 | release_region(devc->pcibase, 8); |
| 891 | |
| 892 | release_region(devc->base, 16); |
| 893 | |
| 894 | if (!(devc->caps & SB_NO_AUDIO)) |
| 895 | { |
| 896 | sound_free_dma(devc->dma8); |
| 897 | if (devc->dma16 >= 0) |
| 898 | sound_free_dma(devc->dma16); |
| 899 | } |
| 900 | if (!(devc->caps & SB_NO_AUDIO && devc->caps & SB_NO_MIDI)) |
| 901 | { |
| 902 | if (devc->irq > 0) |
| 903 | free_irq(devc->irq, devc); |
| 904 | |
| 905 | sb_mixer_unload(devc); |
| 906 | /* We don't have to do this bit any more the UART401 is its own |
| 907 | master -- Krzysztof Halasa */ |
| 908 | /* But we have to do it, if UART401 is not detected */ |
| 909 | if (!sbmpu) |
| 910 | sound_unload_mididev(devc->my_mididev); |
| 911 | sound_unload_audiodev(devc->dev); |
| 912 | } |
| 913 | kfree(devc); |
| 914 | } |
| 915 | else |
| 916 | release_region(hw_config->io_base, 16); |
Jesper Juhl | 0941737 | 2005-06-25 14:58:49 -0700 | [diff] [blame] | 917 | |
| 918 | kfree(detected_devc); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 919 | } |
| 920 | |
| 921 | /* |
| 922 | * Mixer access routines |
| 923 | * |
| 924 | * ES1887 modifications: some mixer registers reside in the |
| 925 | * range above 0xa0. These must be accessed in another way. |
| 926 | */ |
| 927 | |
| 928 | void sb_setmixer(sb_devc * devc, unsigned int port, unsigned int value) |
| 929 | { |
| 930 | unsigned long flags; |
| 931 | |
| 932 | if (devc->model == MDL_ESS) { |
| 933 | ess_setmixer (devc, port, value); |
| 934 | return; |
| 935 | } |
| 936 | |
| 937 | spin_lock_irqsave(&devc->lock, flags); |
| 938 | |
| 939 | outb(((unsigned char) (port & 0xff)), MIXER_ADDR); |
| 940 | udelay(20); |
| 941 | outb(((unsigned char) (value & 0xff)), MIXER_DATA); |
| 942 | udelay(20); |
| 943 | |
| 944 | spin_unlock_irqrestore(&devc->lock, flags); |
| 945 | } |
| 946 | |
| 947 | unsigned int sb_getmixer(sb_devc * devc, unsigned int port) |
| 948 | { |
| 949 | unsigned int val; |
| 950 | unsigned long flags; |
| 951 | |
| 952 | if (devc->model == MDL_ESS) return ess_getmixer (devc, port); |
| 953 | |
| 954 | spin_lock_irqsave(&devc->lock, flags); |
| 955 | |
| 956 | outb(((unsigned char) (port & 0xff)), MIXER_ADDR); |
| 957 | udelay(20); |
| 958 | val = inb(MIXER_DATA); |
| 959 | udelay(20); |
| 960 | |
| 961 | spin_unlock_irqrestore(&devc->lock, flags); |
| 962 | |
| 963 | return val; |
| 964 | } |
| 965 | |
| 966 | void sb_chgmixer |
| 967 | (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val) |
| 968 | { |
| 969 | int value; |
| 970 | |
| 971 | value = sb_getmixer(devc, reg); |
| 972 | value = (value & ~mask) | (val & mask); |
| 973 | sb_setmixer(devc, reg, value); |
| 974 | } |
| 975 | |
| 976 | /* |
| 977 | * MPU401 MIDI initialization. |
| 978 | */ |
| 979 | |
| 980 | static void smw_putmem(sb_devc * devc, int base, int addr, unsigned char val) |
| 981 | { |
| 982 | unsigned long flags; |
| 983 | |
| 984 | spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */ |
| 985 | |
| 986 | outb((addr & 0xff), base + 1); /* Low address bits */ |
| 987 | outb((addr >> 8), base + 2); /* High address bits */ |
| 988 | outb((val), base); /* Data */ |
| 989 | |
| 990 | spin_unlock_irqrestore(&jazz16_lock, flags); |
| 991 | } |
| 992 | |
| 993 | static unsigned char smw_getmem(sb_devc * devc, int base, int addr) |
| 994 | { |
| 995 | unsigned long flags; |
| 996 | unsigned char val; |
| 997 | |
| 998 | spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */ |
| 999 | |
| 1000 | outb((addr & 0xff), base + 1); /* Low address bits */ |
| 1001 | outb((addr >> 8), base + 2); /* High address bits */ |
| 1002 | val = inb(base); /* Data */ |
| 1003 | |
| 1004 | spin_unlock_irqrestore(&jazz16_lock, flags); |
| 1005 | return val; |
| 1006 | } |
| 1007 | |
| 1008 | static int smw_midi_init(sb_devc * devc, struct address_info *hw_config) |
| 1009 | { |
| 1010 | int mpu_base = hw_config->io_base; |
| 1011 | int mp_base = mpu_base + 4; /* Microcontroller base */ |
| 1012 | int i; |
| 1013 | unsigned char control; |
| 1014 | |
| 1015 | |
| 1016 | /* |
| 1017 | * Reset the microcontroller so that the RAM can be accessed |
| 1018 | */ |
| 1019 | |
| 1020 | control = inb(mpu_base + 7); |
| 1021 | outb((control | 3), mpu_base + 7); /* Set last two bits to 1 (?) */ |
| 1022 | outb(((control & 0xfe) | 2), mpu_base + 7); /* xxxxxxx0 resets the mc */ |
| 1023 | |
| 1024 | mdelay(3); /* Wait at least 1ms */ |
| 1025 | |
| 1026 | outb((control & 0xfc), mpu_base + 7); /* xxxxxx00 enables RAM */ |
| 1027 | |
| 1028 | /* |
| 1029 | * Detect microcontroller by probing the 8k RAM area |
| 1030 | */ |
| 1031 | smw_putmem(devc, mp_base, 0, 0x00); |
| 1032 | smw_putmem(devc, mp_base, 1, 0xff); |
| 1033 | udelay(10); |
| 1034 | |
| 1035 | if (smw_getmem(devc, mp_base, 0) != 0x00 || smw_getmem(devc, mp_base, 1) != 0xff) |
| 1036 | { |
| 1037 | DDB(printk("SM Wave: No microcontroller RAM detected (%02x, %02x)\n", smw_getmem(devc, mp_base, 0), smw_getmem(devc, mp_base, 1))); |
| 1038 | return 0; /* No RAM */ |
| 1039 | } |
| 1040 | /* |
| 1041 | * There is RAM so assume it's really a SM Wave |
| 1042 | */ |
| 1043 | |
| 1044 | devc->model = MDL_SMW; |
| 1045 | smw_mixer_init(devc); |
| 1046 | |
| 1047 | #ifdef MODULE |
| 1048 | if (!smw_ucode) |
| 1049 | { |
| 1050 | smw_ucodeLen = mod_firmware_load("/etc/sound/midi0001.bin", (void *) &smw_ucode); |
| 1051 | smw_free = smw_ucode; |
| 1052 | } |
| 1053 | #endif |
| 1054 | if (smw_ucodeLen > 0) |
| 1055 | { |
| 1056 | if (smw_ucodeLen != 8192) |
| 1057 | { |
| 1058 | printk(KERN_ERR "SM Wave: Invalid microcode (MIDI0001.BIN) length\n"); |
| 1059 | return 1; |
| 1060 | } |
| 1061 | /* |
| 1062 | * Download microcode |
| 1063 | */ |
| 1064 | |
| 1065 | for (i = 0; i < 8192; i++) |
| 1066 | smw_putmem(devc, mp_base, i, smw_ucode[i]); |
| 1067 | |
| 1068 | /* |
| 1069 | * Verify microcode |
| 1070 | */ |
| 1071 | |
| 1072 | for (i = 0; i < 8192; i++) |
| 1073 | if (smw_getmem(devc, mp_base, i) != smw_ucode[i]) |
| 1074 | { |
| 1075 | printk(KERN_ERR "SM Wave: Microcode verification failed\n"); |
| 1076 | return 0; |
| 1077 | } |
| 1078 | } |
| 1079 | control = 0; |
| 1080 | #ifdef SMW_SCSI_IRQ |
| 1081 | /* |
| 1082 | * Set the SCSI interrupt (IRQ2/9, IRQ3 or IRQ10). The SCSI interrupt |
| 1083 | * is disabled by default. |
| 1084 | * |
| 1085 | * FIXME - make this a module option |
| 1086 | * |
| 1087 | * BTW the Zilog 5380 SCSI controller is located at MPU base + 0x10. |
| 1088 | */ |
| 1089 | { |
| 1090 | static unsigned char scsi_irq_bits[] = { |
| 1091 | 0, 0, 3, 1, 0, 0, 0, 0, 0, 3, 2, 0, 0, 0, 0, 0 |
| 1092 | }; |
| 1093 | control |= scsi_irq_bits[SMW_SCSI_IRQ] << 6; |
| 1094 | } |
| 1095 | #endif |
| 1096 | |
| 1097 | #ifdef SMW_OPL4_ENABLE |
| 1098 | /* |
| 1099 | * Make the OPL4 chip visible on the PC bus at 0x380. |
| 1100 | * |
| 1101 | * There is no need to enable this feature since this driver |
| 1102 | * doesn't support OPL4 yet. Also there is no RAM in SM Wave so |
| 1103 | * enabling OPL4 is pretty useless. |
| 1104 | */ |
| 1105 | control |= 0x10; /* Uses IRQ12 if bit 0x20 == 0 */ |
| 1106 | /* control |= 0x20; Uncomment this if you want to use IRQ7 */ |
| 1107 | #endif |
| 1108 | outb((control | 0x03), mpu_base + 7); /* xxxxxx11 restarts */ |
| 1109 | hw_config->name = "SoundMan Wave"; |
| 1110 | return 1; |
| 1111 | } |
| 1112 | |
| 1113 | static int init_Jazz16_midi(sb_devc * devc, struct address_info *hw_config) |
| 1114 | { |
| 1115 | int mpu_base = hw_config->io_base; |
| 1116 | int sb_base = devc->base; |
| 1117 | int irq = hw_config->irq; |
| 1118 | |
| 1119 | unsigned char bits = 0; |
| 1120 | unsigned long flags; |
| 1121 | |
| 1122 | if (irq < 0) |
| 1123 | irq *= -1; |
| 1124 | |
| 1125 | if (irq < 1 || irq > 15 || |
| 1126 | jazz_irq_bits[irq] == 0) |
| 1127 | { |
| 1128 | printk(KERN_ERR "Jazz16: Invalid MIDI interrupt (IRQ%d)\n", irq); |
| 1129 | return 0; |
| 1130 | } |
| 1131 | switch (sb_base) |
| 1132 | { |
| 1133 | case 0x220: |
| 1134 | bits = 1; |
| 1135 | break; |
| 1136 | case 0x240: |
| 1137 | bits = 2; |
| 1138 | break; |
| 1139 | case 0x260: |
| 1140 | bits = 3; |
| 1141 | break; |
| 1142 | default: |
| 1143 | return 0; |
| 1144 | } |
| 1145 | bits = jazz16_bits = bits << 5; |
| 1146 | switch (mpu_base) |
| 1147 | { |
| 1148 | case 0x310: |
| 1149 | bits |= 1; |
| 1150 | break; |
| 1151 | case 0x320: |
| 1152 | bits |= 2; |
| 1153 | break; |
| 1154 | case 0x330: |
| 1155 | bits |= 3; |
| 1156 | break; |
| 1157 | default: |
| 1158 | printk(KERN_ERR "Jazz16: Invalid MIDI I/O port %x\n", mpu_base); |
| 1159 | return 0; |
| 1160 | } |
| 1161 | /* |
| 1162 | * Magic wake up sequence by writing to 0x201 (aka Joystick port) |
| 1163 | */ |
| 1164 | spin_lock_irqsave(&jazz16_lock, flags); |
| 1165 | outb(0xAF, 0x201); |
| 1166 | outb(0x50, 0x201); |
| 1167 | outb(bits, 0x201); |
| 1168 | spin_unlock_irqrestore(&jazz16_lock, flags); |
| 1169 | |
| 1170 | hw_config->name = "Jazz16"; |
| 1171 | smw_midi_init(devc, hw_config); |
| 1172 | |
| 1173 | if (!sb_dsp_command(devc, 0xfb)) |
| 1174 | return 0; |
| 1175 | |
| 1176 | if (!sb_dsp_command(devc, jazz_dma_bits[devc->dma8] | |
| 1177 | (jazz_dma_bits[devc->dma16] << 4))) |
| 1178 | return 0; |
| 1179 | |
| 1180 | if (!sb_dsp_command(devc, jazz_irq_bits[devc->irq] | |
| 1181 | (jazz_irq_bits[irq] << 4))) |
| 1182 | return 0; |
| 1183 | |
| 1184 | return 1; |
| 1185 | } |
| 1186 | |
| 1187 | int probe_sbmpu(struct address_info *hw_config, struct module *owner) |
| 1188 | { |
| 1189 | sb_devc *devc = last_devc; |
| 1190 | int ret; |
| 1191 | |
| 1192 | if (last_devc == NULL) |
| 1193 | return 0; |
| 1194 | |
| 1195 | last_devc = NULL; |
| 1196 | |
| 1197 | if (hw_config->io_base <= 0) |
| 1198 | { |
| 1199 | /* The real vibra16 is fine about this, but we have to go |
| 1200 | wipe up after Cyrix again */ |
| 1201 | |
| 1202 | if(devc->model == MDL_SB16 && devc->minor >= 12) |
| 1203 | { |
| 1204 | unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06; |
| 1205 | sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */ |
| 1206 | } |
| 1207 | return 0; |
| 1208 | } |
| 1209 | |
| 1210 | #if defined(CONFIG_SOUND_MPU401) |
| 1211 | if (devc->model == MDL_ESS) |
| 1212 | { |
| 1213 | struct resource *ports; |
| 1214 | ports = request_region(hw_config->io_base, 2, "mpu401"); |
| 1215 | if (!ports) { |
| 1216 | printk(KERN_ERR "sbmpu: I/O port conflict (%x)\n", hw_config->io_base); |
| 1217 | return 0; |
| 1218 | } |
| 1219 | if (!ess_midi_init(devc, hw_config)) { |
| 1220 | release_region(hw_config->io_base, 2); |
| 1221 | return 0; |
| 1222 | } |
| 1223 | hw_config->name = "ESS1xxx MPU"; |
| 1224 | devc->midi_irq_cookie = NULL; |
| 1225 | if (!probe_mpu401(hw_config, ports)) { |
| 1226 | release_region(hw_config->io_base, 2); |
| 1227 | return 0; |
| 1228 | } |
| 1229 | attach_mpu401(hw_config, owner); |
| 1230 | if (last_sb->irq == -hw_config->irq) |
| 1231 | last_sb->midi_irq_cookie=(void *)hw_config->slots[1]; |
| 1232 | return 1; |
| 1233 | } |
| 1234 | #endif |
| 1235 | |
| 1236 | switch (devc->model) |
| 1237 | { |
| 1238 | case MDL_SB16: |
| 1239 | if (hw_config->io_base != 0x300 && hw_config->io_base != 0x330) |
| 1240 | { |
| 1241 | printk(KERN_ERR "SB16: Invalid MIDI port %x\n", hw_config->io_base); |
| 1242 | return 0; |
| 1243 | } |
| 1244 | hw_config->name = "Sound Blaster 16"; |
| 1245 | if (hw_config->irq < 3 || hw_config->irq == devc->irq) |
| 1246 | hw_config->irq = -devc->irq; |
| 1247 | if (devc->minor > 12) /* What is Vibra's version??? */ |
| 1248 | sb16_set_mpu_port(devc, hw_config); |
| 1249 | break; |
| 1250 | |
| 1251 | case MDL_JAZZ: |
| 1252 | if (hw_config->irq < 3 || hw_config->irq == devc->irq) |
| 1253 | hw_config->irq = -devc->irq; |
| 1254 | if (!init_Jazz16_midi(devc, hw_config)) |
| 1255 | return 0; |
| 1256 | break; |
| 1257 | |
| 1258 | case MDL_YMPCI: |
| 1259 | hw_config->name = "Yamaha PCI Legacy"; |
| 1260 | printk("Yamaha PCI legacy UART401 check.\n"); |
| 1261 | break; |
| 1262 | default: |
| 1263 | return 0; |
| 1264 | } |
| 1265 | |
| 1266 | ret = probe_uart401(hw_config, owner); |
| 1267 | if (ret) |
| 1268 | last_sb->midi_irq_cookie=midi_devs[hw_config->slots[4]]->devc; |
| 1269 | return ret; |
| 1270 | } |
| 1271 | |
| 1272 | void unload_sbmpu(struct address_info *hw_config) |
| 1273 | { |
| 1274 | #if defined(CONFIG_SOUND_MPU401) |
| 1275 | if (!strcmp (hw_config->name, "ESS1xxx MPU")) { |
| 1276 | unload_mpu401(hw_config); |
| 1277 | return; |
| 1278 | } |
| 1279 | #endif |
| 1280 | unload_uart401(hw_config); |
| 1281 | } |
| 1282 | |
| 1283 | EXPORT_SYMBOL(sb_dsp_init); |
| 1284 | EXPORT_SYMBOL(sb_dsp_detect); |
| 1285 | EXPORT_SYMBOL(sb_dsp_unload); |
| 1286 | EXPORT_SYMBOL(sb_be_quiet); |
| 1287 | EXPORT_SYMBOL(probe_sbmpu); |
| 1288 | EXPORT_SYMBOL(unload_sbmpu); |
| 1289 | EXPORT_SYMBOL(smw_free); |
| 1290 | MODULE_LICENSE("GPL"); |