blob: cc64462d4c4ee0ee97e5271afa3769bdfdab7686 [file] [log] [blame]
Felipe Balbi550a7372008-07-24 12:27:36 +03001/*
2 * MUSB OTG driver host support
3 *
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 *
22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 *
33 */
34
35#include <linux/module.h>
36#include <linux/kernel.h>
37#include <linux/delay.h>
38#include <linux/sched.h>
39#include <linux/slab.h>
40#include <linux/errno.h>
41#include <linux/init.h>
42#include <linux/list.h>
43
44#include "musb_core.h"
45#include "musb_host.h"
46
47
48/* MUSB HOST status 22-mar-2006
49 *
50 * - There's still lots of partial code duplication for fault paths, so
51 * they aren't handled as consistently as they need to be.
52 *
53 * - PIO mostly behaved when last tested.
54 * + including ep0, with all usbtest cases 9, 10
55 * + usbtest 14 (ep0out) doesn't seem to run at all
56 * + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
57 * configurations, but otherwise double buffering passes basic tests.
58 * + for 2.6.N, for N > ~10, needs API changes for hcd framework.
59 *
60 * - DMA (CPPI) ... partially behaves, not currently recommended
61 * + about 1/15 the speed of typical EHCI implementations (PCI)
62 * + RX, all too often reqpkt seems to misbehave after tx
63 * + TX, no known issues (other than evident silicon issue)
64 *
65 * - DMA (Mentor/OMAP) ...has at least toggle update problems
66 *
67 * - Still no traffic scheduling code to make NAKing for bulk or control
68 * transfers unable to starve other requests; or to make efficient use
69 * of hardware with periodic transfers. (Note that network drivers
70 * commonly post bulk reads that stay pending for a long time; these
71 * would make very visible trouble.)
72 *
73 * - Not tested with HNP, but some SRP paths seem to behave.
74 *
75 * NOTE 24-August-2006:
76 *
77 * - Bulk traffic finally uses both sides of hardware ep1, freeing up an
78 * extra endpoint for periodic use enabling hub + keybd + mouse. That
79 * mostly works, except that with "usbnet" it's easy to trigger cases
80 * with "ping" where RX loses. (a) ping to davinci, even "ping -f",
81 * fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
82 * although ARP RX wins. (That test was done with a full speed link.)
83 */
84
85
86/*
87 * NOTE on endpoint usage:
88 *
89 * CONTROL transfers all go through ep0. BULK ones go through dedicated IN
90 * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
91 *
92 * (Yes, bulk _could_ use more of the endpoints than that, and would even
93 * benefit from it ... one remote device may easily be NAKing while others
94 * need to perform transfers in that same direction. The same thing could
95 * be done in software though, assuming dma cooperates.)
96 *
97 * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
98 * So far that scheduling is both dumb and optimistic: the endpoint will be
99 * "claimed" until its software queue is no longer refilled. No multiplexing
100 * of transfers between endpoints, or anything clever.
101 */
102
103
104static void musb_ep_program(struct musb *musb, u8 epnum,
105 struct urb *urb, unsigned int nOut,
106 u8 *buf, u32 len);
107
108/*
109 * Clear TX fifo. Needed to avoid BABBLE errors.
110 */
David Brownellc767c1c2008-09-11 11:53:23 +0300111static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
Felipe Balbi550a7372008-07-24 12:27:36 +0300112{
113 void __iomem *epio = ep->regs;
114 u16 csr;
115 int retries = 1000;
116
117 csr = musb_readw(epio, MUSB_TXCSR);
118 while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
119 DBG(5, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
120 csr |= MUSB_TXCSR_FLUSHFIFO;
121 musb_writew(epio, MUSB_TXCSR, csr);
122 csr = musb_readw(epio, MUSB_TXCSR);
123 if (retries-- < 1) {
124 ERR("Could not flush host TX fifo: csr: %04x\n", csr);
125 return;
126 }
127 mdelay(1);
128 }
129}
130
131/*
132 * Start transmit. Caller is responsible for locking shared resources.
133 * musb must be locked.
134 */
135static inline void musb_h_tx_start(struct musb_hw_ep *ep)
136{
137 u16 txcsr;
138
139 /* NOTE: no locks here; caller should lock and select EP */
140 if (ep->epnum) {
141 txcsr = musb_readw(ep->regs, MUSB_TXCSR);
142 txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
143 musb_writew(ep->regs, MUSB_TXCSR, txcsr);
144 } else {
145 txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
146 musb_writew(ep->regs, MUSB_CSR0, txcsr);
147 }
148
149}
150
151static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
152{
153 u16 txcsr;
154
155 /* NOTE: no locks here; caller should lock and select EP */
156 txcsr = musb_readw(ep->regs, MUSB_TXCSR);
157 txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
158 musb_writew(ep->regs, MUSB_TXCSR, txcsr);
159}
160
161/*
162 * Start the URB at the front of an endpoint's queue
163 * end must be claimed from the caller.
164 *
165 * Context: controller locked, irqs blocked
166 */
167static void
168musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
169{
170 u16 frame;
171 u32 len;
172 void *buf;
173 void __iomem *mbase = musb->mregs;
174 struct urb *urb = next_urb(qh);
175 struct musb_hw_ep *hw_ep = qh->hw_ep;
176 unsigned pipe = urb->pipe;
177 u8 address = usb_pipedevice(pipe);
178 int epnum = hw_ep->epnum;
179
180 /* initialize software qh state */
181 qh->offset = 0;
182 qh->segsize = 0;
183
184 /* gather right source of data */
185 switch (qh->type) {
186 case USB_ENDPOINT_XFER_CONTROL:
187 /* control transfers always start with SETUP */
188 is_in = 0;
189 hw_ep->out_qh = qh;
190 musb->ep0_stage = MUSB_EP0_START;
191 buf = urb->setup_packet;
192 len = 8;
193 break;
194 case USB_ENDPOINT_XFER_ISOC:
195 qh->iso_idx = 0;
196 qh->frame = 0;
197 buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
198 len = urb->iso_frame_desc[0].length;
199 break;
200 default: /* bulk, interrupt */
201 buf = urb->transfer_buffer;
202 len = urb->transfer_buffer_length;
203 }
204
205 DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
206 qh, urb, address, qh->epnum,
207 is_in ? "in" : "out",
208 ({char *s; switch (qh->type) {
209 case USB_ENDPOINT_XFER_CONTROL: s = ""; break;
210 case USB_ENDPOINT_XFER_BULK: s = "-bulk"; break;
211 case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
212 default: s = "-intr"; break;
213 }; s; }),
214 epnum, buf, len);
215
216 /* Configure endpoint */
217 if (is_in || hw_ep->is_shared_fifo)
218 hw_ep->in_qh = qh;
219 else
220 hw_ep->out_qh = qh;
221 musb_ep_program(musb, epnum, urb, !is_in, buf, len);
222
223 /* transmit may have more work: start it when it is time */
224 if (is_in)
225 return;
226
227 /* determine if the time is right for a periodic transfer */
228 switch (qh->type) {
229 case USB_ENDPOINT_XFER_ISOC:
230 case USB_ENDPOINT_XFER_INT:
231 DBG(3, "check whether there's still time for periodic Tx\n");
232 qh->iso_idx = 0;
233 frame = musb_readw(mbase, MUSB_FRAME);
234 /* FIXME this doesn't implement that scheduling policy ...
235 * or handle framecounter wrapping
236 */
237 if ((urb->transfer_flags & URB_ISO_ASAP)
238 || (frame >= urb->start_frame)) {
239 /* REVISIT the SOF irq handler shouldn't duplicate
240 * this code; and we don't init urb->start_frame...
241 */
242 qh->frame = 0;
243 goto start;
244 } else {
245 qh->frame = urb->start_frame;
246 /* enable SOF interrupt so we can count down */
247 DBG(1, "SOF for %d\n", epnum);
248#if 1 /* ifndef CONFIG_ARCH_DAVINCI */
249 musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
250#endif
251 }
252 break;
253 default:
254start:
255 DBG(4, "Start TX%d %s\n", epnum,
256 hw_ep->tx_channel ? "dma" : "pio");
257
258 if (!hw_ep->tx_channel)
259 musb_h_tx_start(hw_ep);
260 else if (is_cppi_enabled() || tusb_dma_omap())
261 cppi_host_txdma_start(hw_ep);
262 }
263}
264
265/* caller owns controller lock, irqs are blocked */
266static void
267__musb_giveback(struct musb *musb, struct urb *urb, int status)
268__releases(musb->lock)
269__acquires(musb->lock)
270{
271 DBG(({ int level; switch (urb->status) {
272 case 0:
273 level = 4;
274 break;
275 /* common/boring faults */
276 case -EREMOTEIO:
277 case -ESHUTDOWN:
278 case -ECONNRESET:
279 case -EPIPE:
280 level = 3;
281 break;
282 default:
283 level = 2;
284 break;
285 }; level; }),
286 "complete %p (%d), dev%d ep%d%s, %d/%d\n",
287 urb, urb->status,
288 usb_pipedevice(urb->pipe),
289 usb_pipeendpoint(urb->pipe),
290 usb_pipein(urb->pipe) ? "in" : "out",
291 urb->actual_length, urb->transfer_buffer_length
292 );
293
Ajay Kumar Gupta2492e672008-09-11 11:53:21 +0300294 usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
Felipe Balbi550a7372008-07-24 12:27:36 +0300295 spin_unlock(&musb->lock);
296 usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
297 spin_lock(&musb->lock);
298}
299
300/* for bulk/interrupt endpoints only */
301static inline void
302musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
303{
304 struct usb_device *udev = urb->dev;
305 u16 csr;
306 void __iomem *epio = ep->regs;
307 struct musb_qh *qh;
308
309 /* FIXME: the current Mentor DMA code seems to have
310 * problems getting toggle correct.
311 */
312
313 if (is_in || ep->is_shared_fifo)
314 qh = ep->in_qh;
315 else
316 qh = ep->out_qh;
317
318 if (!is_in) {
319 csr = musb_readw(epio, MUSB_TXCSR);
320 usb_settoggle(udev, qh->epnum, 1,
321 (csr & MUSB_TXCSR_H_DATATOGGLE)
322 ? 1 : 0);
323 } else {
324 csr = musb_readw(epio, MUSB_RXCSR);
325 usb_settoggle(udev, qh->epnum, 0,
326 (csr & MUSB_RXCSR_H_DATATOGGLE)
327 ? 1 : 0);
328 }
329}
330
331/* caller owns controller lock, irqs are blocked */
332static struct musb_qh *
333musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
334{
335 int is_in;
336 struct musb_hw_ep *ep = qh->hw_ep;
337 struct musb *musb = ep->musb;
338 int ready = qh->is_ready;
339
340 if (ep->is_shared_fifo)
341 is_in = 1;
342 else
343 is_in = usb_pipein(urb->pipe);
344
345 /* save toggle eagerly, for paranoia */
346 switch (qh->type) {
347 case USB_ENDPOINT_XFER_BULK:
348 case USB_ENDPOINT_XFER_INT:
349 musb_save_toggle(ep, is_in, urb);
350 break;
351 case USB_ENDPOINT_XFER_ISOC:
352 if (status == 0 && urb->error_count)
353 status = -EXDEV;
354 break;
355 }
356
Felipe Balbi550a7372008-07-24 12:27:36 +0300357 qh->is_ready = 0;
358 __musb_giveback(musb, urb, status);
359 qh->is_ready = ready;
360
361 /* reclaim resources (and bandwidth) ASAP; deschedule it, and
362 * invalidate qh as soon as list_empty(&hep->urb_list)
363 */
364 if (list_empty(&qh->hep->urb_list)) {
365 struct list_head *head;
366
367 if (is_in)
368 ep->rx_reinit = 1;
369 else
370 ep->tx_reinit = 1;
371
372 /* clobber old pointers to this qh */
373 if (is_in || ep->is_shared_fifo)
374 ep->in_qh = NULL;
375 else
376 ep->out_qh = NULL;
377 qh->hep->hcpriv = NULL;
378
379 switch (qh->type) {
380
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +0200381 case USB_ENDPOINT_XFER_CONTROL:
382 case USB_ENDPOINT_XFER_BULK:
383 /* fifo policy for these lists, except that NAKing
384 * should rotate a qh to the end (for fairness).
385 */
386 if (qh->mux == 1) {
387 head = qh->ring.prev;
388 list_del(&qh->ring);
389 kfree(qh);
390 qh = first_qh(head);
391 break;
392 }
393
Felipe Balbi550a7372008-07-24 12:27:36 +0300394 case USB_ENDPOINT_XFER_ISOC:
395 case USB_ENDPOINT_XFER_INT:
396 /* this is where periodic bandwidth should be
397 * de-allocated if it's tracked and allocated;
398 * and where we'd update the schedule tree...
399 */
400 musb->periodic[ep->epnum] = NULL;
401 kfree(qh);
402 qh = NULL;
403 break;
Felipe Balbi550a7372008-07-24 12:27:36 +0300404 }
405 }
406 return qh;
407}
408
409/*
410 * Advance this hardware endpoint's queue, completing the specified urb and
411 * advancing to either the next urb queued to that qh, or else invalidating
412 * that qh and advancing to the next qh scheduled after the current one.
413 *
414 * Context: caller owns controller lock, irqs are blocked
415 */
416static void
417musb_advance_schedule(struct musb *musb, struct urb *urb,
418 struct musb_hw_ep *hw_ep, int is_in)
419{
420 struct musb_qh *qh;
421
422 if (is_in || hw_ep->is_shared_fifo)
423 qh = hw_ep->in_qh;
424 else
425 qh = hw_ep->out_qh;
426
427 if (urb->status == -EINPROGRESS)
428 qh = musb_giveback(qh, urb, 0);
429 else
430 qh = musb_giveback(qh, urb, urb->status);
431
432 if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
433 DBG(4, "... next ep%d %cX urb %p\n",
434 hw_ep->epnum, is_in ? 'R' : 'T',
435 next_urb(qh));
436 musb_start_urb(musb, is_in, qh);
437 }
438}
439
David Brownellc767c1c2008-09-11 11:53:23 +0300440static u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
Felipe Balbi550a7372008-07-24 12:27:36 +0300441{
442 /* we don't want fifo to fill itself again;
443 * ignore dma (various models),
444 * leave toggle alone (may not have been saved yet)
445 */
446 csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_RXPKTRDY;
447 csr &= ~(MUSB_RXCSR_H_REQPKT
448 | MUSB_RXCSR_H_AUTOREQ
449 | MUSB_RXCSR_AUTOCLEAR);
450
451 /* write 2x to allow double buffering */
452 musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
453 musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
454
455 /* flush writebuffer */
456 return musb_readw(hw_ep->regs, MUSB_RXCSR);
457}
458
459/*
460 * PIO RX for a packet (or part of it).
461 */
462static bool
463musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
464{
465 u16 rx_count;
466 u8 *buf;
467 u16 csr;
468 bool done = false;
469 u32 length;
470 int do_flush = 0;
471 struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
472 void __iomem *epio = hw_ep->regs;
473 struct musb_qh *qh = hw_ep->in_qh;
474 int pipe = urb->pipe;
475 void *buffer = urb->transfer_buffer;
476
477 /* musb_ep_select(mbase, epnum); */
478 rx_count = musb_readw(epio, MUSB_RXCOUNT);
479 DBG(3, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
480 urb->transfer_buffer, qh->offset,
481 urb->transfer_buffer_length);
482
483 /* unload FIFO */
484 if (usb_pipeisoc(pipe)) {
485 int status = 0;
486 struct usb_iso_packet_descriptor *d;
487
488 if (iso_err) {
489 status = -EILSEQ;
490 urb->error_count++;
491 }
492
493 d = urb->iso_frame_desc + qh->iso_idx;
494 buf = buffer + d->offset;
495 length = d->length;
496 if (rx_count > length) {
497 if (status == 0) {
498 status = -EOVERFLOW;
499 urb->error_count++;
500 }
501 DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
502 do_flush = 1;
503 } else
504 length = rx_count;
505 urb->actual_length += length;
506 d->actual_length = length;
507
508 d->status = status;
509
510 /* see if we are done */
511 done = (++qh->iso_idx >= urb->number_of_packets);
512 } else {
513 /* non-isoch */
514 buf = buffer + qh->offset;
515 length = urb->transfer_buffer_length - qh->offset;
516 if (rx_count > length) {
517 if (urb->status == -EINPROGRESS)
518 urb->status = -EOVERFLOW;
519 DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
520 do_flush = 1;
521 } else
522 length = rx_count;
523 urb->actual_length += length;
524 qh->offset += length;
525
526 /* see if we are done */
527 done = (urb->actual_length == urb->transfer_buffer_length)
528 || (rx_count < qh->maxpacket)
529 || (urb->status != -EINPROGRESS);
530 if (done
531 && (urb->status == -EINPROGRESS)
532 && (urb->transfer_flags & URB_SHORT_NOT_OK)
533 && (urb->actual_length
534 < urb->transfer_buffer_length))
535 urb->status = -EREMOTEIO;
536 }
537
538 musb_read_fifo(hw_ep, length, buf);
539
540 csr = musb_readw(epio, MUSB_RXCSR);
541 csr |= MUSB_RXCSR_H_WZC_BITS;
542 if (unlikely(do_flush))
543 musb_h_flush_rxfifo(hw_ep, csr);
544 else {
545 /* REVISIT this assumes AUTOCLEAR is never set */
546 csr &= ~(MUSB_RXCSR_RXPKTRDY | MUSB_RXCSR_H_REQPKT);
547 if (!done)
548 csr |= MUSB_RXCSR_H_REQPKT;
549 musb_writew(epio, MUSB_RXCSR, csr);
550 }
551
552 return done;
553}
554
555/* we don't always need to reinit a given side of an endpoint...
556 * when we do, use tx/rx reinit routine and then construct a new CSR
557 * to address data toggle, NYET, and DMA or PIO.
558 *
559 * it's possible that driver bugs (especially for DMA) or aborting a
560 * transfer might have left the endpoint busier than it should be.
561 * the busy/not-empty tests are basically paranoia.
562 */
563static void
564musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
565{
566 u16 csr;
567
568 /* NOTE: we know the "rx" fifo reinit never triggers for ep0.
569 * That always uses tx_reinit since ep0 repurposes TX register
570 * offsets; the initial SETUP packet is also a kind of OUT.
571 */
572
573 /* if programmed for Tx, put it in RX mode */
574 if (ep->is_shared_fifo) {
575 csr = musb_readw(ep->regs, MUSB_TXCSR);
576 if (csr & MUSB_TXCSR_MODE) {
577 musb_h_tx_flush_fifo(ep);
578 musb_writew(ep->regs, MUSB_TXCSR,
579 MUSB_TXCSR_FRCDATATOG);
580 }
581 /* clear mode (and everything else) to enable Rx */
582 musb_writew(ep->regs, MUSB_TXCSR, 0);
583
584 /* scrub all previous state, clearing toggle */
585 } else {
586 csr = musb_readw(ep->regs, MUSB_RXCSR);
587 if (csr & MUSB_RXCSR_RXPKTRDY)
588 WARNING("rx%d, packet/%d ready?\n", ep->epnum,
589 musb_readw(ep->regs, MUSB_RXCOUNT));
590
591 musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
592 }
593
594 /* target addr and (for multipoint) hub addr/port */
595 if (musb->is_multipoint) {
596 musb_writeb(ep->target_regs, MUSB_RXFUNCADDR,
597 qh->addr_reg);
598 musb_writeb(ep->target_regs, MUSB_RXHUBADDR,
599 qh->h_addr_reg);
600 musb_writeb(ep->target_regs, MUSB_RXHUBPORT,
601 qh->h_port_reg);
602 } else
603 musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
604
605 /* protocol/endpoint, interval/NAKlimit, i/o size */
606 musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
607 musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
608 /* NOTE: bulk combining rewrites high bits of maxpacket */
609 musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
610
611 ep->rx_reinit = 0;
612}
613
614
615/*
616 * Program an HDRC endpoint as per the given URB
617 * Context: irqs blocked, controller lock held
618 */
619static void musb_ep_program(struct musb *musb, u8 epnum,
620 struct urb *urb, unsigned int is_out,
621 u8 *buf, u32 len)
622{
623 struct dma_controller *dma_controller;
624 struct dma_channel *dma_channel;
625 u8 dma_ok;
626 void __iomem *mbase = musb->mregs;
627 struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
628 void __iomem *epio = hw_ep->regs;
629 struct musb_qh *qh;
630 u16 packet_sz;
631
632 if (!is_out || hw_ep->is_shared_fifo)
633 qh = hw_ep->in_qh;
634 else
635 qh = hw_ep->out_qh;
636
637 packet_sz = qh->maxpacket;
638
639 DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
640 "h_addr%02x h_port%02x bytes %d\n",
641 is_out ? "-->" : "<--",
642 epnum, urb, urb->dev->speed,
643 qh->addr_reg, qh->epnum, is_out ? "out" : "in",
644 qh->h_addr_reg, qh->h_port_reg,
645 len);
646
647 musb_ep_select(mbase, epnum);
648
649 /* candidate for DMA? */
650 dma_controller = musb->dma_controller;
651 if (is_dma_capable() && epnum && dma_controller) {
652 dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
653 if (!dma_channel) {
654 dma_channel = dma_controller->channel_alloc(
655 dma_controller, hw_ep, is_out);
656 if (is_out)
657 hw_ep->tx_channel = dma_channel;
658 else
659 hw_ep->rx_channel = dma_channel;
660 }
661 } else
662 dma_channel = NULL;
663
664 /* make sure we clear DMAEnab, autoSet bits from previous run */
665
666 /* OUT/transmit/EP0 or IN/receive? */
667 if (is_out) {
668 u16 csr;
669 u16 int_txe;
670 u16 load_count;
671
672 csr = musb_readw(epio, MUSB_TXCSR);
673
674 /* disable interrupt in case we flush */
675 int_txe = musb_readw(mbase, MUSB_INTRTXE);
676 musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
677
678 /* general endpoint setup */
679 if (epnum) {
680 /* ASSERT: TXCSR_DMAENAB was already cleared */
681
682 /* flush all old state, set default */
683 musb_h_tx_flush_fifo(hw_ep);
684 csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
685 | MUSB_TXCSR_DMAMODE
686 | MUSB_TXCSR_FRCDATATOG
687 | MUSB_TXCSR_H_RXSTALL
688 | MUSB_TXCSR_H_ERROR
689 | MUSB_TXCSR_TXPKTRDY
690 );
691 csr |= MUSB_TXCSR_MODE;
692
693 if (usb_gettoggle(urb->dev,
694 qh->epnum, 1))
695 csr |= MUSB_TXCSR_H_WR_DATATOGGLE
696 | MUSB_TXCSR_H_DATATOGGLE;
697 else
698 csr |= MUSB_TXCSR_CLRDATATOG;
699
700 /* twice in case of double packet buffering */
701 musb_writew(epio, MUSB_TXCSR, csr);
702 /* REVISIT may need to clear FLUSHFIFO ... */
703 musb_writew(epio, MUSB_TXCSR, csr);
704 csr = musb_readw(epio, MUSB_TXCSR);
705 } else {
706 /* endpoint 0: just flush */
707 musb_writew(epio, MUSB_CSR0,
708 csr | MUSB_CSR0_FLUSHFIFO);
709 musb_writew(epio, MUSB_CSR0,
710 csr | MUSB_CSR0_FLUSHFIFO);
711 }
712
713 /* target addr and (for multipoint) hub addr/port */
714 if (musb->is_multipoint) {
715 musb_writeb(mbase,
716 MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
717 qh->addr_reg);
718 musb_writeb(mbase,
719 MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
720 qh->h_addr_reg);
721 musb_writeb(mbase,
722 MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
723 qh->h_port_reg);
724/* FIXME if !epnum, do the same for RX ... */
725 } else
726 musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
727
728 /* protocol/endpoint/interval/NAKlimit */
729 if (epnum) {
730 musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
731 if (can_bulk_split(musb, qh->type))
732 musb_writew(epio, MUSB_TXMAXP,
733 packet_sz
734 | ((hw_ep->max_packet_sz_tx /
735 packet_sz) - 1) << 11);
736 else
737 musb_writew(epio, MUSB_TXMAXP,
738 packet_sz);
739 musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
740 } else {
741 musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
742 if (musb->is_multipoint)
743 musb_writeb(epio, MUSB_TYPE0,
744 qh->type_reg);
745 }
746
747 if (can_bulk_split(musb, qh->type))
748 load_count = min((u32) hw_ep->max_packet_sz_tx,
749 len);
750 else
751 load_count = min((u32) packet_sz, len);
752
753#ifdef CONFIG_USB_INVENTRA_DMA
754 if (dma_channel) {
755
756 /* clear previous state */
757 csr = musb_readw(epio, MUSB_TXCSR);
758 csr &= ~(MUSB_TXCSR_AUTOSET
759 | MUSB_TXCSR_DMAMODE
760 | MUSB_TXCSR_DMAENAB);
761 csr |= MUSB_TXCSR_MODE;
762 musb_writew(epio, MUSB_TXCSR,
763 csr | MUSB_TXCSR_MODE);
764
765 qh->segsize = min(len, dma_channel->max_len);
766
767 if (qh->segsize <= packet_sz)
768 dma_channel->desired_mode = 0;
769 else
770 dma_channel->desired_mode = 1;
771
772
773 if (dma_channel->desired_mode == 0) {
774 csr &= ~(MUSB_TXCSR_AUTOSET
775 | MUSB_TXCSR_DMAMODE);
776 csr |= (MUSB_TXCSR_DMAENAB);
777 /* against programming guide */
778 } else
779 csr |= (MUSB_TXCSR_AUTOSET
780 | MUSB_TXCSR_DMAENAB
781 | MUSB_TXCSR_DMAMODE);
782
783 musb_writew(epio, MUSB_TXCSR, csr);
784
785 dma_ok = dma_controller->channel_program(
786 dma_channel, packet_sz,
787 dma_channel->desired_mode,
788 urb->transfer_dma,
789 qh->segsize);
790 if (dma_ok) {
791 load_count = 0;
792 } else {
793 dma_controller->channel_release(dma_channel);
794 if (is_out)
795 hw_ep->tx_channel = NULL;
796 else
797 hw_ep->rx_channel = NULL;
798 dma_channel = NULL;
799 }
800 }
801#endif
802
803 /* candidate for DMA */
804 if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
805
806 /* program endpoint CSRs first, then setup DMA.
807 * assume CPPI setup succeeds.
808 * defer enabling dma.
809 */
810 csr = musb_readw(epio, MUSB_TXCSR);
811 csr &= ~(MUSB_TXCSR_AUTOSET
812 | MUSB_TXCSR_DMAMODE
813 | MUSB_TXCSR_DMAENAB);
814 csr |= MUSB_TXCSR_MODE;
815 musb_writew(epio, MUSB_TXCSR,
816 csr | MUSB_TXCSR_MODE);
817
818 dma_channel->actual_len = 0L;
819 qh->segsize = len;
820
821 /* TX uses "rndis" mode automatically, but needs help
822 * to identify the zero-length-final-packet case.
823 */
824 dma_ok = dma_controller->channel_program(
825 dma_channel, packet_sz,
826 (urb->transfer_flags
827 & URB_ZERO_PACKET)
828 == URB_ZERO_PACKET,
829 urb->transfer_dma,
830 qh->segsize);
831 if (dma_ok) {
832 load_count = 0;
833 } else {
834 dma_controller->channel_release(dma_channel);
835 hw_ep->tx_channel = NULL;
836 dma_channel = NULL;
837
838 /* REVISIT there's an error path here that
839 * needs handling: can't do dma, but
840 * there's no pio buffer address...
841 */
842 }
843 }
844
845 if (load_count) {
846 /* ASSERT: TXCSR_DMAENAB was already cleared */
847
848 /* PIO to load FIFO */
849 qh->segsize = load_count;
850 musb_write_fifo(hw_ep, load_count, buf);
851 csr = musb_readw(epio, MUSB_TXCSR);
852 csr &= ~(MUSB_TXCSR_DMAENAB
853 | MUSB_TXCSR_DMAMODE
854 | MUSB_TXCSR_AUTOSET);
855 /* write CSR */
856 csr |= MUSB_TXCSR_MODE;
857
858 if (epnum)
859 musb_writew(epio, MUSB_TXCSR, csr);
860 }
861
862 /* re-enable interrupt */
863 musb_writew(mbase, MUSB_INTRTXE, int_txe);
864
865 /* IN/receive */
866 } else {
867 u16 csr;
868
869 if (hw_ep->rx_reinit) {
870 musb_rx_reinit(musb, qh, hw_ep);
871
872 /* init new state: toggle and NYET, maybe DMA later */
873 if (usb_gettoggle(urb->dev, qh->epnum, 0))
874 csr = MUSB_RXCSR_H_WR_DATATOGGLE
875 | MUSB_RXCSR_H_DATATOGGLE;
876 else
877 csr = 0;
878 if (qh->type == USB_ENDPOINT_XFER_INT)
879 csr |= MUSB_RXCSR_DISNYET;
880
881 } else {
882 csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
883
884 if (csr & (MUSB_RXCSR_RXPKTRDY
885 | MUSB_RXCSR_DMAENAB
886 | MUSB_RXCSR_H_REQPKT))
887 ERR("broken !rx_reinit, ep%d csr %04x\n",
888 hw_ep->epnum, csr);
889
890 /* scrub any stale state, leaving toggle alone */
891 csr &= MUSB_RXCSR_DISNYET;
892 }
893
894 /* kick things off */
895
896 if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
897 /* candidate for DMA */
898 if (dma_channel) {
899 dma_channel->actual_len = 0L;
900 qh->segsize = len;
901
902 /* AUTOREQ is in a DMA register */
903 musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
904 csr = musb_readw(hw_ep->regs,
905 MUSB_RXCSR);
906
907 /* unless caller treats short rx transfers as
908 * errors, we dare not queue multiple transfers.
909 */
910 dma_ok = dma_controller->channel_program(
911 dma_channel, packet_sz,
912 !(urb->transfer_flags
913 & URB_SHORT_NOT_OK),
914 urb->transfer_dma,
915 qh->segsize);
916 if (!dma_ok) {
917 dma_controller->channel_release(
918 dma_channel);
919 hw_ep->rx_channel = NULL;
920 dma_channel = NULL;
921 } else
922 csr |= MUSB_RXCSR_DMAENAB;
923 }
924 }
925
926 csr |= MUSB_RXCSR_H_REQPKT;
927 DBG(7, "RXCSR%d := %04x\n", epnum, csr);
928 musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
929 csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
930 }
931}
932
933
934/*
935 * Service the default endpoint (ep0) as host.
936 * Return true until it's time to start the status stage.
937 */
938static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
939{
940 bool more = false;
941 u8 *fifo_dest = NULL;
942 u16 fifo_count = 0;
943 struct musb_hw_ep *hw_ep = musb->control_ep;
944 struct musb_qh *qh = hw_ep->in_qh;
945 struct usb_ctrlrequest *request;
946
947 switch (musb->ep0_stage) {
948 case MUSB_EP0_IN:
949 fifo_dest = urb->transfer_buffer + urb->actual_length;
950 fifo_count = min(len, ((u16) (urb->transfer_buffer_length
951 - urb->actual_length)));
952 if (fifo_count < len)
953 urb->status = -EOVERFLOW;
954
955 musb_read_fifo(hw_ep, fifo_count, fifo_dest);
956
957 urb->actual_length += fifo_count;
958 if (len < qh->maxpacket) {
959 /* always terminate on short read; it's
960 * rarely reported as an error.
961 */
962 } else if (urb->actual_length <
963 urb->transfer_buffer_length)
964 more = true;
965 break;
966 case MUSB_EP0_START:
967 request = (struct usb_ctrlrequest *) urb->setup_packet;
968
969 if (!request->wLength) {
970 DBG(4, "start no-DATA\n");
971 break;
972 } else if (request->bRequestType & USB_DIR_IN) {
973 DBG(4, "start IN-DATA\n");
974 musb->ep0_stage = MUSB_EP0_IN;
975 more = true;
976 break;
977 } else {
978 DBG(4, "start OUT-DATA\n");
979 musb->ep0_stage = MUSB_EP0_OUT;
980 more = true;
981 }
982 /* FALLTHROUGH */
983 case MUSB_EP0_OUT:
984 fifo_count = min(qh->maxpacket, ((u16)
985 (urb->transfer_buffer_length
986 - urb->actual_length)));
987
988 if (fifo_count) {
989 fifo_dest = (u8 *) (urb->transfer_buffer
990 + urb->actual_length);
991 DBG(3, "Sending %d bytes to %p\n",
992 fifo_count, fifo_dest);
993 musb_write_fifo(hw_ep, fifo_count, fifo_dest);
994
995 urb->actual_length += fifo_count;
996 more = true;
997 }
998 break;
999 default:
1000 ERR("bogus ep0 stage %d\n", musb->ep0_stage);
1001 break;
1002 }
1003
1004 return more;
1005}
1006
1007/*
1008 * Handle default endpoint interrupt as host. Only called in IRQ time
David Brownellc767c1c2008-09-11 11:53:23 +03001009 * from musb_interrupt().
Felipe Balbi550a7372008-07-24 12:27:36 +03001010 *
1011 * called with controller irqlocked
1012 */
1013irqreturn_t musb_h_ep0_irq(struct musb *musb)
1014{
1015 struct urb *urb;
1016 u16 csr, len;
1017 int status = 0;
1018 void __iomem *mbase = musb->mregs;
1019 struct musb_hw_ep *hw_ep = musb->control_ep;
1020 void __iomem *epio = hw_ep->regs;
1021 struct musb_qh *qh = hw_ep->in_qh;
1022 bool complete = false;
1023 irqreturn_t retval = IRQ_NONE;
1024
1025 /* ep0 only has one queue, "in" */
1026 urb = next_urb(qh);
1027
1028 musb_ep_select(mbase, 0);
1029 csr = musb_readw(epio, MUSB_CSR0);
1030 len = (csr & MUSB_CSR0_RXPKTRDY)
1031 ? musb_readb(epio, MUSB_COUNT0)
1032 : 0;
1033
1034 DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
1035 csr, qh, len, urb, musb->ep0_stage);
1036
1037 /* if we just did status stage, we are done */
1038 if (MUSB_EP0_STATUS == musb->ep0_stage) {
1039 retval = IRQ_HANDLED;
1040 complete = true;
1041 }
1042
1043 /* prepare status */
1044 if (csr & MUSB_CSR0_H_RXSTALL) {
1045 DBG(6, "STALLING ENDPOINT\n");
1046 status = -EPIPE;
1047
1048 } else if (csr & MUSB_CSR0_H_ERROR) {
1049 DBG(2, "no response, csr0 %04x\n", csr);
1050 status = -EPROTO;
1051
1052 } else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
1053 DBG(2, "control NAK timeout\n");
1054
1055 /* NOTE: this code path would be a good place to PAUSE a
1056 * control transfer, if another one is queued, so that
1057 * ep0 is more likely to stay busy.
1058 *
1059 * if (qh->ring.next != &musb->control), then
1060 * we have a candidate... NAKing is *NOT* an error
1061 */
1062 musb_writew(epio, MUSB_CSR0, 0);
1063 retval = IRQ_HANDLED;
1064 }
1065
1066 if (status) {
1067 DBG(6, "aborting\n");
1068 retval = IRQ_HANDLED;
1069 if (urb)
1070 urb->status = status;
1071 complete = true;
1072
1073 /* use the proper sequence to abort the transfer */
1074 if (csr & MUSB_CSR0_H_REQPKT) {
1075 csr &= ~MUSB_CSR0_H_REQPKT;
1076 musb_writew(epio, MUSB_CSR0, csr);
1077 csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
1078 musb_writew(epio, MUSB_CSR0, csr);
1079 } else {
1080 csr |= MUSB_CSR0_FLUSHFIFO;
1081 musb_writew(epio, MUSB_CSR0, csr);
1082 musb_writew(epio, MUSB_CSR0, csr);
1083 csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
1084 musb_writew(epio, MUSB_CSR0, csr);
1085 }
1086
1087 musb_writeb(epio, MUSB_NAKLIMIT0, 0);
1088
1089 /* clear it */
1090 musb_writew(epio, MUSB_CSR0, 0);
1091 }
1092
1093 if (unlikely(!urb)) {
1094 /* stop endpoint since we have no place for its data, this
1095 * SHOULD NEVER HAPPEN! */
1096 ERR("no URB for end 0\n");
1097
1098 musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
1099 musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
1100 musb_writew(epio, MUSB_CSR0, 0);
1101
1102 goto done;
1103 }
1104
1105 if (!complete) {
1106 /* call common logic and prepare response */
1107 if (musb_h_ep0_continue(musb, len, urb)) {
1108 /* more packets required */
1109 csr = (MUSB_EP0_IN == musb->ep0_stage)
1110 ? MUSB_CSR0_H_REQPKT : MUSB_CSR0_TXPKTRDY;
1111 } else {
1112 /* data transfer complete; perform status phase */
1113 if (usb_pipeout(urb->pipe)
1114 || !urb->transfer_buffer_length)
1115 csr = MUSB_CSR0_H_STATUSPKT
1116 | MUSB_CSR0_H_REQPKT;
1117 else
1118 csr = MUSB_CSR0_H_STATUSPKT
1119 | MUSB_CSR0_TXPKTRDY;
1120
1121 /* flag status stage */
1122 musb->ep0_stage = MUSB_EP0_STATUS;
1123
1124 DBG(5, "ep0 STATUS, csr %04x\n", csr);
1125
1126 }
1127 musb_writew(epio, MUSB_CSR0, csr);
1128 retval = IRQ_HANDLED;
1129 } else
1130 musb->ep0_stage = MUSB_EP0_IDLE;
1131
1132 /* call completion handler if done */
1133 if (complete)
1134 musb_advance_schedule(musb, urb, hw_ep, 1);
1135done:
1136 return retval;
1137}
1138
1139
1140#ifdef CONFIG_USB_INVENTRA_DMA
1141
1142/* Host side TX (OUT) using Mentor DMA works as follows:
1143 submit_urb ->
1144 - if queue was empty, Program Endpoint
1145 - ... which starts DMA to fifo in mode 1 or 0
1146
1147 DMA Isr (transfer complete) -> TxAvail()
1148 - Stop DMA (~DmaEnab) (<--- Alert ... currently happens
1149 only in musb_cleanup_urb)
1150 - TxPktRdy has to be set in mode 0 or for
1151 short packets in mode 1.
1152*/
1153
1154#endif
1155
1156/* Service a Tx-Available or dma completion irq for the endpoint */
1157void musb_host_tx(struct musb *musb, u8 epnum)
1158{
1159 int pipe;
1160 bool done = false;
1161 u16 tx_csr;
1162 size_t wLength = 0;
1163 u8 *buf = NULL;
1164 struct urb *urb;
1165 struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
1166 void __iomem *epio = hw_ep->regs;
1167 struct musb_qh *qh = hw_ep->out_qh;
1168 u32 status = 0;
1169 void __iomem *mbase = musb->mregs;
1170 struct dma_channel *dma;
1171
1172 urb = next_urb(qh);
1173
1174 musb_ep_select(mbase, epnum);
1175 tx_csr = musb_readw(epio, MUSB_TXCSR);
1176
1177 /* with CPPI, DMA sometimes triggers "extra" irqs */
1178 if (!urb) {
1179 DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
1180 goto finish;
1181 }
1182
1183 pipe = urb->pipe;
1184 dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
1185 DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
1186 dma ? ", dma" : "");
1187
1188 /* check for errors */
1189 if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
1190 /* dma was disabled, fifo flushed */
1191 DBG(3, "TX end %d stall\n", epnum);
1192
1193 /* stall; record URB status */
1194 status = -EPIPE;
1195
1196 } else if (tx_csr & MUSB_TXCSR_H_ERROR) {
1197 /* (NON-ISO) dma was disabled, fifo flushed */
1198 DBG(3, "TX 3strikes on ep=%d\n", epnum);
1199
1200 status = -ETIMEDOUT;
1201
1202 } else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
1203 DBG(6, "TX end=%d device not responding\n", epnum);
1204
1205 /* NOTE: this code path would be a good place to PAUSE a
1206 * transfer, if there's some other (nonperiodic) tx urb
1207 * that could use this fifo. (dma complicates it...)
1208 *
1209 * if (bulk && qh->ring.next != &musb->out_bulk), then
1210 * we have a candidate... NAKing is *NOT* an error
1211 */
1212 musb_ep_select(mbase, epnum);
1213 musb_writew(epio, MUSB_TXCSR,
1214 MUSB_TXCSR_H_WZC_BITS
1215 | MUSB_TXCSR_TXPKTRDY);
1216 goto finish;
1217 }
1218
1219 if (status) {
1220 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
1221 dma->status = MUSB_DMA_STATUS_CORE_ABORT;
1222 (void) musb->dma_controller->channel_abort(dma);
1223 }
1224
1225 /* do the proper sequence to abort the transfer in the
1226 * usb core; the dma engine should already be stopped.
1227 */
1228 musb_h_tx_flush_fifo(hw_ep);
1229 tx_csr &= ~(MUSB_TXCSR_AUTOSET
1230 | MUSB_TXCSR_DMAENAB
1231 | MUSB_TXCSR_H_ERROR
1232 | MUSB_TXCSR_H_RXSTALL
1233 | MUSB_TXCSR_H_NAKTIMEOUT
1234 );
1235
1236 musb_ep_select(mbase, epnum);
1237 musb_writew(epio, MUSB_TXCSR, tx_csr);
1238 /* REVISIT may need to clear FLUSHFIFO ... */
1239 musb_writew(epio, MUSB_TXCSR, tx_csr);
1240 musb_writeb(epio, MUSB_TXINTERVAL, 0);
1241
1242 done = true;
1243 }
1244
1245 /* second cppi case */
1246 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
1247 DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
1248 goto finish;
1249
1250 }
1251
1252 /* REVISIT this looks wrong... */
1253 if (!status || dma || usb_pipeisoc(pipe)) {
1254 if (dma)
1255 wLength = dma->actual_len;
1256 else
1257 wLength = qh->segsize;
1258 qh->offset += wLength;
1259
1260 if (usb_pipeisoc(pipe)) {
1261 struct usb_iso_packet_descriptor *d;
1262
1263 d = urb->iso_frame_desc + qh->iso_idx;
1264 d->actual_length = qh->segsize;
1265 if (++qh->iso_idx >= urb->number_of_packets) {
1266 done = true;
1267 } else {
1268 d++;
1269 buf = urb->transfer_buffer + d->offset;
1270 wLength = d->length;
1271 }
1272 } else if (dma) {
1273 done = true;
1274 } else {
1275 /* see if we need to send more data, or ZLP */
1276 if (qh->segsize < qh->maxpacket)
1277 done = true;
1278 else if (qh->offset == urb->transfer_buffer_length
1279 && !(urb->transfer_flags
1280 & URB_ZERO_PACKET))
1281 done = true;
1282 if (!done) {
1283 buf = urb->transfer_buffer
1284 + qh->offset;
1285 wLength = urb->transfer_buffer_length
1286 - qh->offset;
1287 }
1288 }
1289 }
1290
1291 /* urb->status != -EINPROGRESS means request has been faulted,
1292 * so we must abort this transfer after cleanup
1293 */
1294 if (urb->status != -EINPROGRESS) {
1295 done = true;
1296 if (status == 0)
1297 status = urb->status;
1298 }
1299
1300 if (done) {
1301 /* set status */
1302 urb->status = status;
1303 urb->actual_length = qh->offset;
1304 musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
1305
1306 } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
1307 /* WARN_ON(!buf); */
1308
1309 /* REVISIT: some docs say that when hw_ep->tx_double_buffered,
1310 * (and presumably, fifo is not half-full) we should write TWO
1311 * packets before updating TXCSR ... other docs disagree ...
1312 */
1313 /* PIO: start next packet in this URB */
1314 wLength = min(qh->maxpacket, (u16) wLength);
1315 musb_write_fifo(hw_ep, wLength, buf);
1316 qh->segsize = wLength;
1317
1318 musb_ep_select(mbase, epnum);
1319 musb_writew(epio, MUSB_TXCSR,
1320 MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
1321 } else
1322 DBG(1, "not complete, but dma enabled?\n");
1323
1324finish:
1325 return;
1326}
1327
1328
1329#ifdef CONFIG_USB_INVENTRA_DMA
1330
1331/* Host side RX (IN) using Mentor DMA works as follows:
1332 submit_urb ->
1333 - if queue was empty, ProgramEndpoint
1334 - first IN token is sent out (by setting ReqPkt)
1335 LinuxIsr -> RxReady()
1336 /\ => first packet is received
1337 | - Set in mode 0 (DmaEnab, ~ReqPkt)
1338 | -> DMA Isr (transfer complete) -> RxReady()
1339 | - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
1340 | - if urb not complete, send next IN token (ReqPkt)
1341 | | else complete urb.
1342 | |
1343 ---------------------------
1344 *
1345 * Nuances of mode 1:
1346 * For short packets, no ack (+RxPktRdy) is sent automatically
1347 * (even if AutoClear is ON)
1348 * For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
1349 * automatically => major problem, as collecting the next packet becomes
1350 * difficult. Hence mode 1 is not used.
1351 *
1352 * REVISIT
1353 * All we care about at this driver level is that
1354 * (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
1355 * (b) termination conditions are: short RX, or buffer full;
1356 * (c) fault modes include
1357 * - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
1358 * (and that endpoint's dma queue stops immediately)
1359 * - overflow (full, PLUS more bytes in the terminal packet)
1360 *
1361 * So for example, usb-storage sets URB_SHORT_NOT_OK, and would
1362 * thus be a great candidate for using mode 1 ... for all but the
1363 * last packet of one URB's transfer.
1364 */
1365
1366#endif
1367
1368/*
1369 * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
1370 * and high-bandwidth IN transfer cases.
1371 */
1372void musb_host_rx(struct musb *musb, u8 epnum)
1373{
1374 struct urb *urb;
1375 struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
1376 void __iomem *epio = hw_ep->regs;
1377 struct musb_qh *qh = hw_ep->in_qh;
1378 size_t xfer_len;
1379 void __iomem *mbase = musb->mregs;
1380 int pipe;
1381 u16 rx_csr, val;
1382 bool iso_err = false;
1383 bool done = false;
1384 u32 status;
1385 struct dma_channel *dma;
1386
1387 musb_ep_select(mbase, epnum);
1388
1389 urb = next_urb(qh);
1390 dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
1391 status = 0;
1392 xfer_len = 0;
1393
1394 rx_csr = musb_readw(epio, MUSB_RXCSR);
1395 val = rx_csr;
1396
1397 if (unlikely(!urb)) {
1398 /* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
1399 * usbtest #11 (unlinks) triggers it regularly, sometimes
1400 * with fifo full. (Only with DMA??)
1401 */
1402 DBG(3, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
1403 musb_readw(epio, MUSB_RXCOUNT));
1404 musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
1405 return;
1406 }
1407
1408 pipe = urb->pipe;
1409
1410 DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
1411 epnum, rx_csr, urb->actual_length,
1412 dma ? dma->actual_len : 0);
1413
1414 /* check for errors, concurrent stall & unlink is not really
1415 * handled yet! */
1416 if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
1417 DBG(3, "RX end %d STALL\n", epnum);
1418
1419 /* stall; record URB status */
1420 status = -EPIPE;
1421
1422 } else if (rx_csr & MUSB_RXCSR_H_ERROR) {
1423 DBG(3, "end %d RX proto error\n", epnum);
1424
1425 status = -EPROTO;
1426 musb_writeb(epio, MUSB_RXINTERVAL, 0);
1427
1428 } else if (rx_csr & MUSB_RXCSR_DATAERROR) {
1429
1430 if (USB_ENDPOINT_XFER_ISOC != qh->type) {
1431 /* NOTE this code path would be a good place to PAUSE a
1432 * transfer, if there's some other (nonperiodic) rx urb
1433 * that could use this fifo. (dma complicates it...)
1434 *
1435 * if (bulk && qh->ring.next != &musb->in_bulk), then
1436 * we have a candidate... NAKing is *NOT* an error
1437 */
1438 DBG(6, "RX end %d NAK timeout\n", epnum);
1439 musb_ep_select(mbase, epnum);
1440 musb_writew(epio, MUSB_RXCSR,
1441 MUSB_RXCSR_H_WZC_BITS
1442 | MUSB_RXCSR_H_REQPKT);
1443
1444 goto finish;
1445 } else {
1446 DBG(4, "RX end %d ISO data error\n", epnum);
1447 /* packet error reported later */
1448 iso_err = true;
1449 }
1450 }
1451
1452 /* faults abort the transfer */
1453 if (status) {
1454 /* clean up dma and collect transfer count */
1455 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
1456 dma->status = MUSB_DMA_STATUS_CORE_ABORT;
1457 (void) musb->dma_controller->channel_abort(dma);
1458 xfer_len = dma->actual_len;
1459 }
1460 musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
1461 musb_writeb(epio, MUSB_RXINTERVAL, 0);
1462 done = true;
1463 goto finish;
1464 }
1465
1466 if (unlikely(dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY)) {
1467 /* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
1468 ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
1469 goto finish;
1470 }
1471
1472 /* thorough shutdown for now ... given more precise fault handling
1473 * and better queueing support, we might keep a DMA pipeline going
1474 * while processing this irq for earlier completions.
1475 */
1476
1477 /* FIXME this is _way_ too much in-line logic for Mentor DMA */
1478
1479#ifndef CONFIG_USB_INVENTRA_DMA
1480 if (rx_csr & MUSB_RXCSR_H_REQPKT) {
1481 /* REVISIT this happened for a while on some short reads...
1482 * the cleanup still needs investigation... looks bad...
1483 * and also duplicates dma cleanup code above ... plus,
1484 * shouldn't this be the "half full" double buffer case?
1485 */
1486 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
1487 dma->status = MUSB_DMA_STATUS_CORE_ABORT;
1488 (void) musb->dma_controller->channel_abort(dma);
1489 xfer_len = dma->actual_len;
1490 done = true;
1491 }
1492
1493 DBG(2, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
1494 xfer_len, dma ? ", dma" : "");
1495 rx_csr &= ~MUSB_RXCSR_H_REQPKT;
1496
1497 musb_ep_select(mbase, epnum);
1498 musb_writew(epio, MUSB_RXCSR,
1499 MUSB_RXCSR_H_WZC_BITS | rx_csr);
1500 }
1501#endif
1502 if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
1503 xfer_len = dma->actual_len;
1504
1505 val &= ~(MUSB_RXCSR_DMAENAB
1506 | MUSB_RXCSR_H_AUTOREQ
1507 | MUSB_RXCSR_AUTOCLEAR
1508 | MUSB_RXCSR_RXPKTRDY);
1509 musb_writew(hw_ep->regs, MUSB_RXCSR, val);
1510
1511#ifdef CONFIG_USB_INVENTRA_DMA
Ajay Kumar Guptaf82a6892008-10-29 15:10:31 +02001512 if (usb_pipeisoc(pipe)) {
1513 struct usb_iso_packet_descriptor *d;
1514
1515 d = urb->iso_frame_desc + qh->iso_idx;
1516 d->actual_length = xfer_len;
1517
1518 /* even if there was an error, we did the dma
1519 * for iso_frame_desc->length
1520 */
1521 if (d->status != EILSEQ && d->status != -EOVERFLOW)
1522 d->status = 0;
1523
1524 if (++qh->iso_idx >= urb->number_of_packets)
1525 done = true;
1526 else
1527 done = false;
1528
1529 } else {
Felipe Balbi550a7372008-07-24 12:27:36 +03001530 /* done if urb buffer is full or short packet is recd */
1531 done = (urb->actual_length + xfer_len >=
1532 urb->transfer_buffer_length
1533 || dma->actual_len < qh->maxpacket);
Ajay Kumar Guptaf82a6892008-10-29 15:10:31 +02001534 }
Felipe Balbi550a7372008-07-24 12:27:36 +03001535
1536 /* send IN token for next packet, without AUTOREQ */
1537 if (!done) {
1538 val |= MUSB_RXCSR_H_REQPKT;
1539 musb_writew(epio, MUSB_RXCSR,
1540 MUSB_RXCSR_H_WZC_BITS | val);
1541 }
1542
1543 DBG(4, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
1544 done ? "off" : "reset",
1545 musb_readw(epio, MUSB_RXCSR),
1546 musb_readw(epio, MUSB_RXCOUNT));
1547#else
1548 done = true;
1549#endif
1550 } else if (urb->status == -EINPROGRESS) {
1551 /* if no errors, be sure a packet is ready for unloading */
1552 if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) {
1553 status = -EPROTO;
1554 ERR("Rx interrupt with no errors or packet!\n");
1555
1556 /* FIXME this is another "SHOULD NEVER HAPPEN" */
1557
1558/* SCRUB (RX) */
1559 /* do the proper sequence to abort the transfer */
1560 musb_ep_select(mbase, epnum);
1561 val &= ~MUSB_RXCSR_H_REQPKT;
1562 musb_writew(epio, MUSB_RXCSR, val);
1563 goto finish;
1564 }
1565
1566 /* we are expecting IN packets */
1567#ifdef CONFIG_USB_INVENTRA_DMA
1568 if (dma) {
1569 struct dma_controller *c;
1570 u16 rx_count;
Ajay Kumar Guptaf82a6892008-10-29 15:10:31 +02001571 int ret, length;
1572 dma_addr_t buf;
Felipe Balbi550a7372008-07-24 12:27:36 +03001573
1574 rx_count = musb_readw(epio, MUSB_RXCOUNT);
1575
1576 DBG(2, "RX%d count %d, buffer 0x%x len %d/%d\n",
1577 epnum, rx_count,
1578 urb->transfer_dma
1579 + urb->actual_length,
1580 qh->offset,
1581 urb->transfer_buffer_length);
1582
1583 c = musb->dma_controller;
1584
Ajay Kumar Guptaf82a6892008-10-29 15:10:31 +02001585 if (usb_pipeisoc(pipe)) {
1586 int status = 0;
1587 struct usb_iso_packet_descriptor *d;
1588
1589 d = urb->iso_frame_desc + qh->iso_idx;
1590
1591 if (iso_err) {
1592 status = -EILSEQ;
1593 urb->error_count++;
1594 }
1595 if (rx_count > d->length) {
1596 if (status == 0) {
1597 status = -EOVERFLOW;
1598 urb->error_count++;
1599 }
1600 DBG(2, "** OVERFLOW %d into %d\n",\
1601 rx_count, d->length);
1602
1603 length = d->length;
1604 } else
1605 length = rx_count;
1606 d->status = status;
1607 buf = urb->transfer_dma + d->offset;
1608 } else {
1609 length = rx_count;
1610 buf = urb->transfer_dma +
1611 urb->actual_length;
1612 }
1613
Felipe Balbi550a7372008-07-24 12:27:36 +03001614 dma->desired_mode = 0;
1615#ifdef USE_MODE1
1616 /* because of the issue below, mode 1 will
1617 * only rarely behave with correct semantics.
1618 */
1619 if ((urb->transfer_flags &
1620 URB_SHORT_NOT_OK)
1621 && (urb->transfer_buffer_length -
1622 urb->actual_length)
1623 > qh->maxpacket)
1624 dma->desired_mode = 1;
Ajay Kumar Guptaf82a6892008-10-29 15:10:31 +02001625 if (rx_count < hw_ep->max_packet_sz_rx) {
1626 length = rx_count;
1627 dma->bDesiredMode = 0;
1628 } else {
1629 length = urb->transfer_buffer_length;
1630 }
Felipe Balbi550a7372008-07-24 12:27:36 +03001631#endif
1632
1633/* Disadvantage of using mode 1:
1634 * It's basically usable only for mass storage class; essentially all
1635 * other protocols also terminate transfers on short packets.
1636 *
1637 * Details:
1638 * An extra IN token is sent at the end of the transfer (due to AUTOREQ)
1639 * If you try to use mode 1 for (transfer_buffer_length - 512), and try
1640 * to use the extra IN token to grab the last packet using mode 0, then
1641 * the problem is that you cannot be sure when the device will send the
1642 * last packet and RxPktRdy set. Sometimes the packet is recd too soon
1643 * such that it gets lost when RxCSR is re-set at the end of the mode 1
1644 * transfer, while sometimes it is recd just a little late so that if you
1645 * try to configure for mode 0 soon after the mode 1 transfer is
1646 * completed, you will find rxcount 0. Okay, so you might think why not
1647 * wait for an interrupt when the pkt is recd. Well, you won't get any!
1648 */
1649
1650 val = musb_readw(epio, MUSB_RXCSR);
1651 val &= ~MUSB_RXCSR_H_REQPKT;
1652
1653 if (dma->desired_mode == 0)
1654 val &= ~MUSB_RXCSR_H_AUTOREQ;
1655 else
1656 val |= MUSB_RXCSR_H_AUTOREQ;
1657 val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
1658
1659 musb_writew(epio, MUSB_RXCSR,
1660 MUSB_RXCSR_H_WZC_BITS | val);
1661
1662 /* REVISIT if when actual_length != 0,
1663 * transfer_buffer_length needs to be
1664 * adjusted first...
1665 */
1666 ret = c->channel_program(
1667 dma, qh->maxpacket,
Ajay Kumar Guptaf82a6892008-10-29 15:10:31 +02001668 dma->desired_mode, buf, length);
Felipe Balbi550a7372008-07-24 12:27:36 +03001669
1670 if (!ret) {
1671 c->channel_release(dma);
1672 hw_ep->rx_channel = NULL;
1673 dma = NULL;
1674 /* REVISIT reset CSR */
1675 }
1676 }
1677#endif /* Mentor DMA */
1678
1679 if (!dma) {
1680 done = musb_host_packet_rx(musb, urb,
1681 epnum, iso_err);
1682 DBG(6, "read %spacket\n", done ? "last " : "");
1683 }
1684 }
1685
Felipe Balbi550a7372008-07-24 12:27:36 +03001686finish:
1687 urb->actual_length += xfer_len;
1688 qh->offset += xfer_len;
1689 if (done) {
1690 if (urb->status == -EINPROGRESS)
1691 urb->status = status;
1692 musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
1693 }
1694}
1695
1696/* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
1697 * the software schedule associates multiple such nodes with a given
1698 * host side hardware endpoint + direction; scheduling may activate
1699 * that hardware endpoint.
1700 */
1701static int musb_schedule(
1702 struct musb *musb,
1703 struct musb_qh *qh,
1704 int is_in)
1705{
1706 int idle;
1707 int best_diff;
1708 int best_end, epnum;
1709 struct musb_hw_ep *hw_ep = NULL;
1710 struct list_head *head = NULL;
1711
1712 /* use fixed hardware for control and bulk */
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +02001713 if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
Felipe Balbi550a7372008-07-24 12:27:36 +03001714 head = &musb->control;
1715 hw_ep = musb->control_ep;
Felipe Balbi550a7372008-07-24 12:27:36 +03001716 goto success;
1717 }
1718
1719 /* else, periodic transfers get muxed to other endpoints */
1720
1721 /* FIXME this doesn't consider direction, so it can only
1722 * work for one half of the endpoint hardware, and assumes
1723 * the previous cases handled all non-shared endpoints...
1724 */
1725
1726 /* we know this qh hasn't been scheduled, so all we need to do
1727 * is choose which hardware endpoint to put it on ...
1728 *
1729 * REVISIT what we really want here is a regular schedule tree
1730 * like e.g. OHCI uses, but for now musb->periodic is just an
1731 * array of the _single_ logical endpoint associated with a
1732 * given physical one (identity mapping logical->physical).
1733 *
1734 * that simplistic approach makes TT scheduling a lot simpler;
1735 * there is none, and thus none of its complexity...
1736 */
1737 best_diff = 4096;
1738 best_end = -1;
1739
1740 for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
1741 int diff;
1742
1743 if (musb->periodic[epnum])
1744 continue;
1745 hw_ep = &musb->endpoints[epnum];
1746 if (hw_ep == musb->bulk_ep)
1747 continue;
1748
1749 if (is_in)
1750 diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
1751 else
1752 diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
1753
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +02001754 if (diff >= 0 && best_diff > diff) {
Felipe Balbi550a7372008-07-24 12:27:36 +03001755 best_diff = diff;
1756 best_end = epnum;
1757 }
1758 }
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +02001759 /* use bulk reserved ep1 if no other ep is free */
Felipe Balbiaa5cbbe2008-11-17 09:08:16 +02001760 if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +02001761 hw_ep = musb->bulk_ep;
1762 if (is_in)
1763 head = &musb->in_bulk;
1764 else
1765 head = &musb->out_bulk;
1766 goto success;
1767 } else if (best_end < 0) {
Felipe Balbi550a7372008-07-24 12:27:36 +03001768 return -ENOSPC;
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +02001769 }
Felipe Balbi550a7372008-07-24 12:27:36 +03001770
1771 idle = 1;
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +02001772 qh->mux = 0;
Felipe Balbi550a7372008-07-24 12:27:36 +03001773 hw_ep = musb->endpoints + best_end;
1774 musb->periodic[best_end] = qh;
1775 DBG(4, "qh %p periodic slot %d\n", qh, best_end);
1776success:
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +02001777 if (head) {
1778 idle = list_empty(head);
1779 list_add_tail(&qh->ring, head);
1780 qh->mux = 1;
1781 }
Felipe Balbi550a7372008-07-24 12:27:36 +03001782 qh->hw_ep = hw_ep;
1783 qh->hep->hcpriv = qh;
1784 if (idle)
1785 musb_start_urb(musb, is_in, qh);
1786 return 0;
1787}
1788
1789static int musb_urb_enqueue(
1790 struct usb_hcd *hcd,
1791 struct urb *urb,
1792 gfp_t mem_flags)
1793{
1794 unsigned long flags;
1795 struct musb *musb = hcd_to_musb(hcd);
1796 struct usb_host_endpoint *hep = urb->ep;
1797 struct musb_qh *qh = hep->hcpriv;
1798 struct usb_endpoint_descriptor *epd = &hep->desc;
1799 int ret;
1800 unsigned type_reg;
1801 unsigned interval;
1802
1803 /* host role must be active */
1804 if (!is_host_active(musb) || !musb->is_active)
1805 return -ENODEV;
1806
1807 spin_lock_irqsave(&musb->lock, flags);
1808 ret = usb_hcd_link_urb_to_ep(hcd, urb);
1809 spin_unlock_irqrestore(&musb->lock, flags);
1810 if (ret)
1811 return ret;
1812
1813 /* DMA mapping was already done, if needed, and this urb is on
1814 * hep->urb_list ... so there's little to do unless hep wasn't
1815 * yet scheduled onto a live qh.
1816 *
1817 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
1818 * disabled, testing for empty qh->ring and avoiding qh setup costs
1819 * except for the first urb queued after a config change.
1820 */
1821 if (qh) {
1822 urb->hcpriv = qh;
1823 return 0;
1824 }
1825
1826 /* Allocate and initialize qh, minimizing the work done each time
1827 * hw_ep gets reprogrammed, or with irqs blocked. Then schedule it.
1828 *
1829 * REVISIT consider a dedicated qh kmem_cache, so it's harder
1830 * for bugs in other kernel code to break this driver...
1831 */
1832 qh = kzalloc(sizeof *qh, mem_flags);
1833 if (!qh) {
Ajay Kumar Gupta2492e672008-09-11 11:53:21 +03001834 spin_lock_irqsave(&musb->lock, flags);
Felipe Balbi550a7372008-07-24 12:27:36 +03001835 usb_hcd_unlink_urb_from_ep(hcd, urb);
Ajay Kumar Gupta2492e672008-09-11 11:53:21 +03001836 spin_unlock_irqrestore(&musb->lock, flags);
Felipe Balbi550a7372008-07-24 12:27:36 +03001837 return -ENOMEM;
1838 }
1839
1840 qh->hep = hep;
1841 qh->dev = urb->dev;
1842 INIT_LIST_HEAD(&qh->ring);
1843 qh->is_ready = 1;
1844
1845 qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
1846
1847 /* no high bandwidth support yet */
1848 if (qh->maxpacket & ~0x7ff) {
1849 ret = -EMSGSIZE;
1850 goto done;
1851 }
1852
1853 qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
1854 qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
1855
1856 /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
1857 qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
1858
1859 /* precompute rxtype/txtype/type0 register */
1860 type_reg = (qh->type << 4) | qh->epnum;
1861 switch (urb->dev->speed) {
1862 case USB_SPEED_LOW:
1863 type_reg |= 0xc0;
1864 break;
1865 case USB_SPEED_FULL:
1866 type_reg |= 0x80;
1867 break;
1868 default:
1869 type_reg |= 0x40;
1870 }
1871 qh->type_reg = type_reg;
1872
1873 /* precompute rxinterval/txinterval register */
1874 interval = min((u8)16, epd->bInterval); /* log encoding */
1875 switch (qh->type) {
1876 case USB_ENDPOINT_XFER_INT:
1877 /* fullspeed uses linear encoding */
1878 if (USB_SPEED_FULL == urb->dev->speed) {
1879 interval = epd->bInterval;
1880 if (!interval)
1881 interval = 1;
1882 }
1883 /* FALLTHROUGH */
1884 case USB_ENDPOINT_XFER_ISOC:
1885 /* iso always uses log encoding */
1886 break;
1887 default:
1888 /* REVISIT we actually want to use NAK limits, hinting to the
1889 * transfer scheduling logic to try some other qh, e.g. try
1890 * for 2 msec first:
1891 *
1892 * interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
1893 *
1894 * The downside of disabling this is that transfer scheduling
1895 * gets VERY unfair for nonperiodic transfers; a misbehaving
1896 * peripheral could make that hurt. Or for reads, one that's
1897 * perfectly normal: network and other drivers keep reads
1898 * posted at all times, having one pending for a week should
1899 * be perfectly safe.
1900 *
1901 * The upside of disabling it is avoidng transfer scheduling
1902 * code to put this aside for while.
1903 */
1904 interval = 0;
1905 }
1906 qh->intv_reg = interval;
1907
1908 /* precompute addressing for external hub/tt ports */
1909 if (musb->is_multipoint) {
1910 struct usb_device *parent = urb->dev->parent;
1911
1912 if (parent != hcd->self.root_hub) {
1913 qh->h_addr_reg = (u8) parent->devnum;
1914
1915 /* set up tt info if needed */
1916 if (urb->dev->tt) {
1917 qh->h_port_reg = (u8) urb->dev->ttport;
Ajay Kumar Guptaae5ad292008-09-11 11:53:20 +03001918 if (urb->dev->tt->hub)
1919 qh->h_addr_reg =
1920 (u8) urb->dev->tt->hub->devnum;
1921 if (urb->dev->tt->multi)
1922 qh->h_addr_reg |= 0x80;
Felipe Balbi550a7372008-07-24 12:27:36 +03001923 }
1924 }
1925 }
1926
1927 /* invariant: hep->hcpriv is null OR the qh that's already scheduled.
1928 * until we get real dma queues (with an entry for each urb/buffer),
1929 * we only have work to do in the former case.
1930 */
1931 spin_lock_irqsave(&musb->lock, flags);
1932 if (hep->hcpriv) {
1933 /* some concurrent activity submitted another urb to hep...
1934 * odd, rare, error prone, but legal.
1935 */
1936 kfree(qh);
1937 ret = 0;
1938 } else
1939 ret = musb_schedule(musb, qh,
1940 epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK);
1941
1942 if (ret == 0) {
1943 urb->hcpriv = qh;
1944 /* FIXME set urb->start_frame for iso/intr, it's tested in
1945 * musb_start_urb(), but otherwise only konicawc cares ...
1946 */
1947 }
1948 spin_unlock_irqrestore(&musb->lock, flags);
1949
1950done:
1951 if (ret != 0) {
Ajay Kumar Gupta2492e672008-09-11 11:53:21 +03001952 spin_lock_irqsave(&musb->lock, flags);
Felipe Balbi550a7372008-07-24 12:27:36 +03001953 usb_hcd_unlink_urb_from_ep(hcd, urb);
Ajay Kumar Gupta2492e672008-09-11 11:53:21 +03001954 spin_unlock_irqrestore(&musb->lock, flags);
Felipe Balbi550a7372008-07-24 12:27:36 +03001955 kfree(qh);
1956 }
1957 return ret;
1958}
1959
1960
1961/*
1962 * abort a transfer that's at the head of a hardware queue.
1963 * called with controller locked, irqs blocked
1964 * that hardware queue advances to the next transfer, unless prevented
1965 */
1966static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
1967{
1968 struct musb_hw_ep *ep = qh->hw_ep;
1969 void __iomem *epio = ep->regs;
1970 unsigned hw_end = ep->epnum;
1971 void __iomem *regs = ep->musb->mregs;
1972 u16 csr;
1973 int status = 0;
1974
1975 musb_ep_select(regs, hw_end);
1976
1977 if (is_dma_capable()) {
1978 struct dma_channel *dma;
1979
1980 dma = is_in ? ep->rx_channel : ep->tx_channel;
1981 if (dma) {
1982 status = ep->musb->dma_controller->channel_abort(dma);
1983 DBG(status ? 1 : 3,
1984 "abort %cX%d DMA for urb %p --> %d\n",
1985 is_in ? 'R' : 'T', ep->epnum,
1986 urb, status);
1987 urb->actual_length += dma->actual_len;
1988 }
1989 }
1990
1991 /* turn off DMA requests, discard state, stop polling ... */
1992 if (is_in) {
1993 /* giveback saves bulk toggle */
1994 csr = musb_h_flush_rxfifo(ep, 0);
1995
1996 /* REVISIT we still get an irq; should likely clear the
1997 * endpoint's irq status here to avoid bogus irqs.
1998 * clearing that status is platform-specific...
1999 */
2000 } else {
2001 musb_h_tx_flush_fifo(ep);
2002 csr = musb_readw(epio, MUSB_TXCSR);
2003 csr &= ~(MUSB_TXCSR_AUTOSET
2004 | MUSB_TXCSR_DMAENAB
2005 | MUSB_TXCSR_H_RXSTALL
2006 | MUSB_TXCSR_H_NAKTIMEOUT
2007 | MUSB_TXCSR_H_ERROR
2008 | MUSB_TXCSR_TXPKTRDY);
2009 musb_writew(epio, MUSB_TXCSR, csr);
2010 /* REVISIT may need to clear FLUSHFIFO ... */
2011 musb_writew(epio, MUSB_TXCSR, csr);
2012 /* flush cpu writebuffer */
2013 csr = musb_readw(epio, MUSB_TXCSR);
2014 }
2015 if (status == 0)
2016 musb_advance_schedule(ep->musb, urb, ep, is_in);
2017 return status;
2018}
2019
2020static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
2021{
2022 struct musb *musb = hcd_to_musb(hcd);
2023 struct musb_qh *qh;
2024 struct list_head *sched;
2025 unsigned long flags;
2026 int ret;
2027
2028 DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
2029 usb_pipedevice(urb->pipe),
2030 usb_pipeendpoint(urb->pipe),
2031 usb_pipein(urb->pipe) ? "in" : "out");
2032
2033 spin_lock_irqsave(&musb->lock, flags);
2034 ret = usb_hcd_check_unlink_urb(hcd, urb, status);
2035 if (ret)
2036 goto done;
2037
2038 qh = urb->hcpriv;
2039 if (!qh)
2040 goto done;
2041
2042 /* Any URB not actively programmed into endpoint hardware can be
2043 * immediately given back. Such an URB must be at the head of its
2044 * endpoint queue, unless someday we get real DMA queues. And even
2045 * then, it might not be known to the hardware...
2046 *
2047 * Otherwise abort current transfer, pending dma, etc.; urb->status
2048 * has already been updated. This is a synchronous abort; it'd be
2049 * OK to hold off until after some IRQ, though.
2050 */
2051 if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
2052 ret = -EINPROGRESS;
2053 else {
2054 switch (qh->type) {
2055 case USB_ENDPOINT_XFER_CONTROL:
2056 sched = &musb->control;
2057 break;
2058 case USB_ENDPOINT_XFER_BULK:
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +02002059 if (qh->mux == 1) {
2060 if (usb_pipein(urb->pipe))
2061 sched = &musb->in_bulk;
2062 else
2063 sched = &musb->out_bulk;
2064 break;
2065 }
Felipe Balbi550a7372008-07-24 12:27:36 +03002066 default:
2067 /* REVISIT when we get a schedule tree, periodic
2068 * transfers won't always be at the head of a
2069 * singleton queue...
2070 */
2071 sched = NULL;
2072 break;
2073 }
2074 }
2075
2076 /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
2077 if (ret < 0 || (sched && qh != first_qh(sched))) {
2078 int ready = qh->is_ready;
2079
2080 ret = 0;
2081 qh->is_ready = 0;
2082 __musb_giveback(musb, urb, 0);
2083 qh->is_ready = ready;
2084 } else
2085 ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
2086done:
2087 spin_unlock_irqrestore(&musb->lock, flags);
2088 return ret;
2089}
2090
2091/* disable an endpoint */
2092static void
2093musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
2094{
2095 u8 epnum = hep->desc.bEndpointAddress;
2096 unsigned long flags;
2097 struct musb *musb = hcd_to_musb(hcd);
2098 u8 is_in = epnum & USB_DIR_IN;
2099 struct musb_qh *qh = hep->hcpriv;
2100 struct urb *urb, *tmp;
2101 struct list_head *sched;
2102
2103 if (!qh)
2104 return;
2105
2106 spin_lock_irqsave(&musb->lock, flags);
2107
2108 switch (qh->type) {
2109 case USB_ENDPOINT_XFER_CONTROL:
2110 sched = &musb->control;
2111 break;
2112 case USB_ENDPOINT_XFER_BULK:
Ajay Kumar Gupta23d15e02008-10-29 15:10:35 +02002113 if (qh->mux == 1) {
2114 if (is_in)
2115 sched = &musb->in_bulk;
2116 else
2117 sched = &musb->out_bulk;
2118 break;
2119 }
Felipe Balbi550a7372008-07-24 12:27:36 +03002120 default:
2121 /* REVISIT when we get a schedule tree, periodic transfers
2122 * won't always be at the head of a singleton queue...
2123 */
2124 sched = NULL;
2125 break;
2126 }
2127
2128 /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
2129
2130 /* kick first urb off the hardware, if needed */
2131 qh->is_ready = 0;
2132 if (!sched || qh == first_qh(sched)) {
2133 urb = next_urb(qh);
2134
2135 /* make software (then hardware) stop ASAP */
2136 if (!urb->unlinked)
2137 urb->status = -ESHUTDOWN;
2138
2139 /* cleanup */
2140 musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
2141 } else
2142 urb = NULL;
2143
2144 /* then just nuke all the others */
2145 list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
2146 musb_giveback(qh, urb, -ESHUTDOWN);
2147
2148 spin_unlock_irqrestore(&musb->lock, flags);
2149}
2150
2151static int musb_h_get_frame_number(struct usb_hcd *hcd)
2152{
2153 struct musb *musb = hcd_to_musb(hcd);
2154
2155 return musb_readw(musb->mregs, MUSB_FRAME);
2156}
2157
2158static int musb_h_start(struct usb_hcd *hcd)
2159{
2160 struct musb *musb = hcd_to_musb(hcd);
2161
2162 /* NOTE: musb_start() is called when the hub driver turns
2163 * on port power, or when (OTG) peripheral starts.
2164 */
2165 hcd->state = HC_STATE_RUNNING;
2166 musb->port1_status = 0;
2167 return 0;
2168}
2169
2170static void musb_h_stop(struct usb_hcd *hcd)
2171{
2172 musb_stop(hcd_to_musb(hcd));
2173 hcd->state = HC_STATE_HALT;
2174}
2175
2176static int musb_bus_suspend(struct usb_hcd *hcd)
2177{
2178 struct musb *musb = hcd_to_musb(hcd);
2179
2180 if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
2181 return 0;
2182
2183 if (is_host_active(musb) && musb->is_active) {
2184 WARNING("trying to suspend as %s is_active=%i\n",
2185 otg_state_string(musb), musb->is_active);
2186 return -EBUSY;
2187 } else
2188 return 0;
2189}
2190
2191static int musb_bus_resume(struct usb_hcd *hcd)
2192{
2193 /* resuming child port does the work */
2194 return 0;
2195}
2196
2197const struct hc_driver musb_hc_driver = {
2198 .description = "musb-hcd",
2199 .product_desc = "MUSB HDRC host driver",
2200 .hcd_priv_size = sizeof(struct musb),
2201 .flags = HCD_USB2 | HCD_MEMORY,
2202
2203 /* not using irq handler or reset hooks from usbcore, since
2204 * those must be shared with peripheral code for OTG configs
2205 */
2206
2207 .start = musb_h_start,
2208 .stop = musb_h_stop,
2209
2210 .get_frame_number = musb_h_get_frame_number,
2211
2212 .urb_enqueue = musb_urb_enqueue,
2213 .urb_dequeue = musb_urb_dequeue,
2214 .endpoint_disable = musb_h_disable,
2215
2216 .hub_status_data = musb_hub_status_data,
2217 .hub_control = musb_hub_control,
2218 .bus_suspend = musb_bus_suspend,
2219 .bus_resume = musb_bus_resume,
2220 /* .start_port_reset = NULL, */
2221 /* .hub_irq_enable = NULL, */
2222};