blob: 10231ef731d124a57c27c5f09ea34d9c51230d48 [file] [log] [blame]
Jeff Garzik669a5db2006-08-29 18:12:40 -04001/*
2 * pata-legacy.c - Legacy port PATA/SATA controller driver.
3 * Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2, or (at your option)
8 * any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; see the file COPYING. If not, write to
17 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
18 *
19 * An ATA driver for the legacy ATA ports.
20 *
21 * Data Sources:
22 * Opti 82C465/82C611 support: Data sheets at opti-inc.com
23 * HT6560 series:
24 * Promise 20230/20620:
25 * http://www.ryston.cz/petr/vlb/pdc20230b.html
26 * http://www.ryston.cz/petr/vlb/pdc20230c.html
27 * http://www.ryston.cz/petr/vlb/pdc20630.html
28 *
29 * Unsupported but docs exist:
30 * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
31 * Winbond W83759A
32 *
33 * This driver handles legacy (that is "ISA/VLB side") IDE ports found
34 * on PC class systems. There are three hybrid devices that are exceptions
35 * The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and
36 * the MPIIX where the tuning is PCI side but the IDE is "ISA side".
37 *
38 * Specific support is included for the ht6560a/ht6560b/opti82c611a/
39 * opti82c465mv/promise 20230c/20630
40 *
41 * Use the autospeed and pio_mask options with:
42 * Appian ADI/2 aka CLPD7220 or AIC25VL01.
43 * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with
44 * Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759,
45 * Winbond W83759A, Promise PDC20230-B
46 *
47 * For now use autospeed and pio_mask as above with the W83759A. This may
48 * change.
49 *
50 * TODO
51 * Merge existing pata_qdi driver
52 *
53 */
54
55#include <linux/kernel.h>
56#include <linux/module.h>
57#include <linux/pci.h>
58#include <linux/init.h>
59#include <linux/blkdev.h>
60#include <linux/delay.h>
61#include <scsi/scsi_host.h>
62#include <linux/ata.h>
63#include <linux/libata.h>
64#include <linux/platform_device.h>
65
66#define DRV_NAME "pata_legacy"
67#define DRV_VERSION "0.5.3"
68
69#define NR_HOST 6
70
71static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
72static int legacy_irq[NR_HOST] = { 15, 14, 11, 10, 8, 12 };
73
74struct legacy_data {
75 unsigned long timing;
76 u8 clock[2];
77 u8 last;
78 int fast;
79 struct platform_device *platform_dev;
80
81};
82
83static struct legacy_data legacy_data[NR_HOST];
84static struct ata_host *legacy_host[NR_HOST];
85static int nr_legacy_host;
86
87
88static int probe_all; /* Set to check all ISA port ranges */
89static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */
90static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */
91static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */
92static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
93static int autospeed; /* Chip present which snoops speed changes */
94static int pio_mask = 0x1F; /* PIO range for autospeed devices */
95
96/**
97 * legacy_set_mode - mode setting
98 * @ap: IDE interface
99 *
100 * Use a non standard set_mode function. We don't want to be tuned.
101 *
102 * The BIOS configured everything. Our job is not to fiddle. Just use
103 * whatever PIO the hardware is using and leave it at that. When we
104 * get some kind of nice user driven API for control then we can
105 * expand on this as per hdparm in the base kernel.
106 */
107
108static void legacy_set_mode(struct ata_port *ap)
109{
110 int i;
111
112 for (i = 0; i < ATA_MAX_DEVICES; i++) {
113 struct ata_device *dev = &ap->device[i];
114 if (ata_dev_enabled(dev)) {
115 dev->pio_mode = XFER_PIO_0;
116 dev->xfer_mode = XFER_PIO_0;
117 dev->xfer_shift = ATA_SHIFT_PIO;
118 dev->flags |= ATA_DFLAG_PIO;
119 }
120 }
121}
122
123static struct scsi_host_template legacy_sht = {
124 .module = THIS_MODULE,
125 .name = DRV_NAME,
126 .ioctl = ata_scsi_ioctl,
127 .queuecommand = ata_scsi_queuecmd,
128 .can_queue = ATA_DEF_QUEUE,
129 .this_id = ATA_SHT_THIS_ID,
130 .sg_tablesize = LIBATA_MAX_PRD,
131 .max_sectors = ATA_MAX_SECTORS,
132 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
133 .emulated = ATA_SHT_EMULATED,
134 .use_clustering = ATA_SHT_USE_CLUSTERING,
135 .proc_name = DRV_NAME,
136 .dma_boundary = ATA_DMA_BOUNDARY,
137 .slave_configure = ata_scsi_slave_config,
138 .bios_param = ata_std_bios_param,
139};
140
141/*
142 * These ops are used if the user indicates the hardware
143 * snoops the commands to decide on the mode and handles the
144 * mode selection "magically" itself. Several legacy controllers
145 * do this. The mode range can be set if it is not 0x1F by setting
146 * pio_mask as well.
147 */
148
149static struct ata_port_operations simple_port_ops = {
150 .port_disable = ata_port_disable,
151 .tf_load = ata_tf_load,
152 .tf_read = ata_tf_read,
153 .check_status = ata_check_status,
154 .exec_command = ata_exec_command,
155 .dev_select = ata_std_dev_select,
156
157 .freeze = ata_bmdma_freeze,
158 .thaw = ata_bmdma_thaw,
159 .error_handler = ata_bmdma_error_handler,
160 .post_internal_cmd = ata_bmdma_post_internal_cmd,
161
162 .qc_prep = ata_qc_prep,
163 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400164
Jeff Garzik669a5db2006-08-29 18:12:40 -0400165 .data_xfer = ata_pio_data_xfer_noirq,
166
167 .irq_handler = ata_interrupt,
168 .irq_clear = ata_bmdma_irq_clear,
169
170 .port_start = ata_port_start,
171 .port_stop = ata_port_stop,
172 .host_stop = ata_host_stop
173};
174
175static struct ata_port_operations legacy_port_ops = {
176 .set_mode = legacy_set_mode,
177
178 .port_disable = ata_port_disable,
179 .tf_load = ata_tf_load,
180 .tf_read = ata_tf_read,
181 .check_status = ata_check_status,
182 .exec_command = ata_exec_command,
183 .dev_select = ata_std_dev_select,
184
185 .error_handler = ata_bmdma_error_handler,
186
187 .qc_prep = ata_qc_prep,
188 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400189
Jeff Garzik669a5db2006-08-29 18:12:40 -0400190 .data_xfer = ata_pio_data_xfer_noirq,
191
192 .irq_handler = ata_interrupt,
193 .irq_clear = ata_bmdma_irq_clear,
194
195 .port_start = ata_port_start,
196 .port_stop = ata_port_stop,
197 .host_stop = ata_host_stop
198};
199
200/*
201 * Promise 20230C and 20620 support
202 *
203 * This controller supports PIO0 to PIO2. We set PIO timings conservatively to
204 * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to
205 * controller and PIO'd to the host and not supported.
206 */
207
208static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
209{
210 int tries = 5;
211 int pio = adev->pio_mode - XFER_PIO_0;
212 u8 rt;
213 unsigned long flags;
Jeff Garzik85cd7252006-08-31 00:03:49 -0400214
Jeff Garzik669a5db2006-08-29 18:12:40 -0400215 /* Safe as UP only. Force I/Os to occur together */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400216
Jeff Garzik669a5db2006-08-29 18:12:40 -0400217 local_irq_save(flags);
Jeff Garzik85cd7252006-08-31 00:03:49 -0400218
Jeff Garzik669a5db2006-08-29 18:12:40 -0400219 /* Unlock the control interface */
220 do
221 {
222 inb(0x1F5);
223 outb(inb(0x1F2) | 0x80, 0x1F2);
224 inb(0x1F2);
225 inb(0x3F6);
226 inb(0x3F6);
227 inb(0x1F2);
228 inb(0x1F2);
229 }
230 while((inb(0x1F2) & 0x80) && --tries);
231
232 local_irq_restore(flags);
Jeff Garzik85cd7252006-08-31 00:03:49 -0400233
Jeff Garzik669a5db2006-08-29 18:12:40 -0400234 outb(inb(0x1F4) & 0x07, 0x1F4);
235
236 rt = inb(0x1F3);
237 rt &= 0x07 << (3 * adev->devno);
238 if (pio)
239 rt |= (1 + 3 * pio) << (3 * adev->devno);
240
241 udelay(100);
242 outb(inb(0x1F2) | 0x01, 0x1F2);
243 udelay(100);
244 inb(0x1F5);
245
246}
247
248static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
249{
250 struct ata_port *ap = adev->ap;
251 int slop = buflen & 3;
252 unsigned long flags;
253
254 if (ata_id_has_dword_io(adev->id)) {
255 local_irq_save(flags);
256
257 /* Perform the 32bit I/O synchronization sequence */
258 inb(ap->ioaddr.nsect_addr);
259 inb(ap->ioaddr.nsect_addr);
260 inb(ap->ioaddr.nsect_addr);
261
262 /* Now the data */
263
264 if (write_data)
265 outsl(ap->ioaddr.data_addr, buf, buflen >> 2);
266 else
267 insl(ap->ioaddr.data_addr, buf, buflen >> 2);
268
269 if (unlikely(slop)) {
270 u32 pad;
271 if (write_data) {
272 memcpy(&pad, buf + buflen - slop, slop);
273 outl(le32_to_cpu(pad), ap->ioaddr.data_addr);
274 } else {
275 pad = cpu_to_le16(inl(ap->ioaddr.data_addr));
276 memcpy(buf + buflen - slop, &pad, slop);
277 }
278 }
279 local_irq_restore(flags);
280 }
281 else
282 ata_pio_data_xfer_noirq(adev, buf, buflen, write_data);
283}
284
285static struct ata_port_operations pdc20230_port_ops = {
286 .set_piomode = pdc20230_set_piomode,
287
288 .port_disable = ata_port_disable,
289 .tf_load = ata_tf_load,
290 .tf_read = ata_tf_read,
291 .check_status = ata_check_status,
292 .exec_command = ata_exec_command,
293 .dev_select = ata_std_dev_select,
294
295 .error_handler = ata_bmdma_error_handler,
296
297 .qc_prep = ata_qc_prep,
298 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400299
Jeff Garzik669a5db2006-08-29 18:12:40 -0400300 .data_xfer = pdc_data_xfer_vlb,
301
302 .irq_handler = ata_interrupt,
303 .irq_clear = ata_bmdma_irq_clear,
304
305 .port_start = ata_port_start,
306 .port_stop = ata_port_stop,
307 .host_stop = ata_host_stop
308};
309
310/*
311 * Holtek 6560A support
312 *
313 * This controller supports PIO0 to PIO2 (no IORDY even though higher timings
314 * can be loaded).
315 */
316
317static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
318{
319 u8 active, recover;
320 struct ata_timing t;
321
322 /* Get the timing data in cycles. For now play safe at 50Mhz */
323 ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
324
325 active = FIT(t.active, 2, 15);
326 recover = FIT(t.recover, 4, 15);
327
328 inb(0x3E6);
329 inb(0x3E6);
330 inb(0x3E6);
331 inb(0x3E6);
332
333 outb(recover << 4 | active, ap->ioaddr.device_addr);
334 inb(ap->ioaddr.status_addr);
335}
336
337static struct ata_port_operations ht6560a_port_ops = {
338 .set_piomode = ht6560a_set_piomode,
339
340 .port_disable = ata_port_disable,
341 .tf_load = ata_tf_load,
342 .tf_read = ata_tf_read,
343 .check_status = ata_check_status,
344 .exec_command = ata_exec_command,
345 .dev_select = ata_std_dev_select,
346
347 .error_handler = ata_bmdma_error_handler,
348
349 .qc_prep = ata_qc_prep,
350 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400351
Jeff Garzik669a5db2006-08-29 18:12:40 -0400352 .data_xfer = ata_pio_data_xfer, /* Check vlb/noirq */
353
354 .irq_handler = ata_interrupt,
355 .irq_clear = ata_bmdma_irq_clear,
356
357 .port_start = ata_port_start,
358 .port_stop = ata_port_stop,
359 .host_stop = ata_host_stop
360};
361
362/*
363 * Holtek 6560B support
364 *
365 * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting
366 * unless we see an ATAPI device in which case we force it off.
367 *
368 * FIXME: need to implement 2nd channel support.
369 */
370
371static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
372{
373 u8 active, recover;
374 struct ata_timing t;
375
376 /* Get the timing data in cycles. For now play safe at 50Mhz */
377 ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
378
379 active = FIT(t.active, 2, 15);
380 recover = FIT(t.recover, 2, 16);
381 recover &= 0x15;
382
383 inb(0x3E6);
384 inb(0x3E6);
385 inb(0x3E6);
386 inb(0x3E6);
387
388 outb(recover << 4 | active, ap->ioaddr.device_addr);
389
390 if (adev->class != ATA_DEV_ATA) {
391 u8 rconf = inb(0x3E6);
392 if (rconf & 0x24) {
393 rconf &= ~ 0x24;
394 outb(rconf, 0x3E6);
395 }
396 }
397 inb(ap->ioaddr.status_addr);
398}
399
400static struct ata_port_operations ht6560b_port_ops = {
401 .set_piomode = ht6560b_set_piomode,
402
403 .port_disable = ata_port_disable,
404 .tf_load = ata_tf_load,
405 .tf_read = ata_tf_read,
406 .check_status = ata_check_status,
407 .exec_command = ata_exec_command,
408 .dev_select = ata_std_dev_select,
409
410 .error_handler = ata_bmdma_error_handler,
411
412 .qc_prep = ata_qc_prep,
413 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400414
Jeff Garzik669a5db2006-08-29 18:12:40 -0400415 .data_xfer = ata_pio_data_xfer, /* FIXME: Check 32bit and noirq */
416
417 .irq_handler = ata_interrupt,
418 .irq_clear = ata_bmdma_irq_clear,
419
420 .port_start = ata_port_start,
421 .port_stop = ata_port_stop,
422 .host_stop = ata_host_stop
423};
424
425/*
426 * Opti core chipset helpers
427 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400428
Jeff Garzik669a5db2006-08-29 18:12:40 -0400429/**
430 * opti_syscfg - read OPTI chipset configuration
431 * @reg: Configuration register to read
432 *
433 * Returns the value of an OPTI system board configuration register.
434 */
435
436static u8 opti_syscfg(u8 reg)
437{
438 unsigned long flags;
439 u8 r;
Jeff Garzik85cd7252006-08-31 00:03:49 -0400440
Jeff Garzik669a5db2006-08-29 18:12:40 -0400441 /* Uniprocessor chipset and must force cycles adjancent */
442 local_irq_save(flags);
443 outb(reg, 0x22);
444 r = inb(0x24);
445 local_irq_restore(flags);
446 return r;
447}
448
449/*
450 * Opti 82C611A
451 *
452 * This controller supports PIO0 to PIO3.
453 */
454
455static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev)
456{
457 u8 active, recover, setup;
458 struct ata_timing t;
459 struct ata_device *pair = ata_dev_pair(adev);
460 int clock;
461 int khz[4] = { 50000, 40000, 33000, 25000 };
462 u8 rc;
463
464 /* Enter configuration mode */
465 inw(ap->ioaddr.error_addr);
466 inw(ap->ioaddr.error_addr);
467 outb(3, ap->ioaddr.nsect_addr);
468
469 /* Read VLB clock strapping */
470 clock = 1000000000 / khz[inb(ap->ioaddr.lbah_addr) & 0x03];
471
472 /* Get the timing data in cycles */
473 ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
474
475 /* Setup timing is shared */
476 if (pair) {
477 struct ata_timing tp;
478 ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
479
480 ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
481 }
482
483 active = FIT(t.active, 2, 17) - 2;
484 recover = FIT(t.recover, 1, 16) - 1;
485 setup = FIT(t.setup, 1, 4) - 1;
486
487 /* Select the right timing bank for write timing */
488 rc = inb(ap->ioaddr.lbal_addr);
489 rc &= 0x7F;
490 rc |= (adev->devno << 7);
491 outb(rc, ap->ioaddr.lbal_addr);
492
493 /* Write the timings */
494 outb(active << 4 | recover, ap->ioaddr.error_addr);
495
496 /* Select the right bank for read timings, also
497 load the shared timings for address */
498 rc = inb(ap->ioaddr.device_addr);
499 rc &= 0xC0;
500 rc |= adev->devno; /* Index select */
501 rc |= (setup << 4) | 0x04;
502 outb(rc, ap->ioaddr.device_addr);
503
504 /* Load the read timings */
505 outb(active << 4 | recover, ap->ioaddr.data_addr);
506
507 /* Ensure the timing register mode is right */
508 rc = inb (ap->ioaddr.lbal_addr);
509 rc &= 0x73;
510 rc |= 0x84;
511 outb(rc, ap->ioaddr.lbal_addr);
512
513 /* Exit command mode */
514 outb(0x83, ap->ioaddr.nsect_addr);
515}
516
517
518static struct ata_port_operations opti82c611a_port_ops = {
519 .set_piomode = opti82c611a_set_piomode,
520
521 .port_disable = ata_port_disable,
522 .tf_load = ata_tf_load,
523 .tf_read = ata_tf_read,
524 .check_status = ata_check_status,
525 .exec_command = ata_exec_command,
526 .dev_select = ata_std_dev_select,
527
528 .error_handler = ata_bmdma_error_handler,
529
530 .qc_prep = ata_qc_prep,
531 .qc_issue = ata_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400532
Jeff Garzik669a5db2006-08-29 18:12:40 -0400533 .data_xfer = ata_pio_data_xfer,
534
535 .irq_handler = ata_interrupt,
536 .irq_clear = ata_bmdma_irq_clear,
537
538 .port_start = ata_port_start,
539 .port_stop = ata_port_stop,
540 .host_stop = ata_host_stop
541};
542
543/*
544 * Opti 82C465MV
545 *
546 * This controller supports PIO0 to PIO3. Unlike the 611A the MVB
547 * version is dual channel but doesn't have a lot of unique registers.
548 */
549
550static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
551{
552 u8 active, recover, setup;
553 struct ata_timing t;
554 struct ata_device *pair = ata_dev_pair(adev);
555 int clock;
556 int khz[4] = { 50000, 40000, 33000, 25000 };
557 u8 rc;
558 u8 sysclk;
559
560 /* Get the clock */
561 sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */
562
563 /* Enter configuration mode */
564 inw(ap->ioaddr.error_addr);
565 inw(ap->ioaddr.error_addr);
566 outb(3, ap->ioaddr.nsect_addr);
567
568 /* Read VLB clock strapping */
569 clock = 1000000000 / khz[sysclk];
570
571 /* Get the timing data in cycles */
572 ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
573
574 /* Setup timing is shared */
575 if (pair) {
576 struct ata_timing tp;
577 ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
578
579 ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
580 }
581
582 active = FIT(t.active, 2, 17) - 2;
583 recover = FIT(t.recover, 1, 16) - 1;
584 setup = FIT(t.setup, 1, 4) - 1;
585
586 /* Select the right timing bank for write timing */
587 rc = inb(ap->ioaddr.lbal_addr);
588 rc &= 0x7F;
589 rc |= (adev->devno << 7);
590 outb(rc, ap->ioaddr.lbal_addr);
591
592 /* Write the timings */
593 outb(active << 4 | recover, ap->ioaddr.error_addr);
594
595 /* Select the right bank for read timings, also
596 load the shared timings for address */
597 rc = inb(ap->ioaddr.device_addr);
598 rc &= 0xC0;
599 rc |= adev->devno; /* Index select */
600 rc |= (setup << 4) | 0x04;
601 outb(rc, ap->ioaddr.device_addr);
602
603 /* Load the read timings */
604 outb(active << 4 | recover, ap->ioaddr.data_addr);
605
606 /* Ensure the timing register mode is right */
607 rc = inb (ap->ioaddr.lbal_addr);
608 rc &= 0x73;
609 rc |= 0x84;
610 outb(rc, ap->ioaddr.lbal_addr);
611
612 /* Exit command mode */
613 outb(0x83, ap->ioaddr.nsect_addr);
614
615 /* We need to know this for quad device on the MVB */
616 ap->host->private_data = ap;
617}
618
619/**
620 * opt82c465mv_qc_issue_prot - command issue
621 * @qc: command pending
622 *
623 * Called when the libata layer is about to issue a command. We wrap
624 * this interface so that we can load the correct ATA timings. The
625 * MVB has a single set of timing registers and these are shared
626 * across channels. As there are two registers we really ought to
627 * track the last two used values as a sort of register window. For
628 * now we just reload on a channel switch. On the single channel
629 * setup this condition never fires so we do nothing extra.
630 *
631 * FIXME: dual channel needs ->serialize support
632 */
633
634static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
635{
636 struct ata_port *ap = qc->ap;
637 struct ata_device *adev = qc->dev;
638
639 /* If timings are set and for the wrong channel (2nd test is
640 due to a libata shortcoming and will eventually go I hope) */
641 if (ap->host->private_data != ap->host
642 && ap->host->private_data != NULL)
643 opti82c46x_set_piomode(ap, adev);
644
645 return ata_qc_issue_prot(qc);
646}
647
648static struct ata_port_operations opti82c46x_port_ops = {
649 .set_piomode = opti82c46x_set_piomode,
650
651 .port_disable = ata_port_disable,
652 .tf_load = ata_tf_load,
653 .tf_read = ata_tf_read,
654 .check_status = ata_check_status,
655 .exec_command = ata_exec_command,
656 .dev_select = ata_std_dev_select,
657
658 .error_handler = ata_bmdma_error_handler,
659
660 .qc_prep = ata_qc_prep,
661 .qc_issue = opti82c46x_qc_issue_prot,
Jeff Garzikbda30282006-09-27 05:41:13 -0400662
Jeff Garzik669a5db2006-08-29 18:12:40 -0400663 .data_xfer = ata_pio_data_xfer,
664
665 .irq_handler = ata_interrupt,
666 .irq_clear = ata_bmdma_irq_clear,
667
668 .port_start = ata_port_start,
669 .port_stop = ata_port_stop,
670 .host_stop = ata_host_stop
671};
672
673
674/**
675 * legacy_init_one - attach a legacy interface
676 * @port: port number
677 * @io: I/O port start
678 * @ctrl: control port
679 * @irq: interrupt line
680 *
681 * Register an ISA bus IDE interface. Such interfaces are PIO and we
682 * assume do not support IRQ sharing.
683 */
684
685static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
686{
687 struct legacy_data *ld = &legacy_data[nr_legacy_host];
688 struct ata_probe_ent ae;
689 struct platform_device *pdev;
690 int ret = -EBUSY;
691 struct ata_port_operations *ops = &legacy_port_ops;
692 int pio_modes = pio_mask;
693 u32 mask = (1 << port);
694
695 if (request_region(io, 8, "pata_legacy") == NULL)
696 return -EBUSY;
697 if (request_region(ctrl, 1, "pata_legacy") == NULL)
698 goto fail_io;
699
700 pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
701 if (pdev == NULL)
702 goto fail_dev;
703
704 if (ht6560a & mask) {
705 ops = &ht6560a_port_ops;
706 pio_modes = 0x07;
707 }
708 if (ht6560b & mask) {
709 ops = &ht6560b_port_ops;
710 pio_modes = 0x1F;
711 }
712 if (opti82c611a & mask) {
713 ops = &opti82c611a_port_ops;
714 pio_modes = 0x0F;
715 }
716 if (opti82c46x & mask) {
717 ops = &opti82c46x_port_ops;
718 pio_modes = 0x0F;
719 }
720
721 /* Probe for automatically detectable controllers */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400722
Jeff Garzik669a5db2006-08-29 18:12:40 -0400723 if (io == 0x1F0 && ops == &legacy_port_ops) {
724 unsigned long flags;
725
726 local_irq_save(flags);
727
728 /* Probes */
729 inb(0x1F5);
730 outb(inb(0x1F2) | 0x80, 0x1F2);
731 inb(0x1F2);
732 inb(0x3F6);
733 inb(0x3F6);
734 inb(0x1F2);
735 inb(0x1F2);
736
737 if ((inb(0x1F2) & 0x80) == 0) {
738 /* PDC20230c or 20630 ? */
739 printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
740 pio_modes = 0x07;
741 ops = &pdc20230_port_ops;
742 udelay(100);
743 inb(0x1F5);
744 } else {
745 outb(0x55, 0x1F2);
746 inb(0x1F2);
747 inb(0x1F2);
748 if (inb(0x1F2) == 0x00) {
749 printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n");
750 }
751 }
752 local_irq_restore(flags);
753 }
754
755
756 /* Chip does mode setting by command snooping */
757 if (ops == &legacy_port_ops && (autospeed & mask))
758 ops = &simple_port_ops;
759 memset(&ae, 0, sizeof(struct ata_probe_ent));
760 INIT_LIST_HEAD(&ae.node);
761 ae.dev = &pdev->dev;
762 ae.port_ops = ops;
763 ae.sht = &legacy_sht;
764 ae.n_ports = 1;
765 ae.pio_mask = pio_modes;
766 ae.irq = irq;
767 ae.irq_flags = 0;
768 ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
769 ae.port[0].cmd_addr = io;
770 ae.port[0].altstatus_addr = ctrl;
771 ae.port[0].ctl_addr = ctrl;
772 ata_std_ports(&ae.port[0]);
773 ae.private_data = ld;
774
775 ret = ata_device_add(&ae);
776 if (ret == 0) {
777 ret = -ENODEV;
778 goto fail;
779 }
780 legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
781 ld->platform_dev = pdev;
782 return 0;
783
784fail:
785 platform_device_unregister(pdev);
786fail_dev:
787 release_region(ctrl, 1);
788fail_io:
789 release_region(io, 8);
790 return ret;
791}
792
793/**
794 * legacy_check_special_cases - ATA special cases
795 * @p: PCI device to check
796 * @master: set this if we find an ATA master
797 * @master: set this if we find an ATA secondary
798 *
799 * A small number of vendors implemented early PCI ATA interfaces on bridge logic
800 * without the ATA interface being PCI visible. Where we have a matching PCI driver
801 * we must skip the relevant device here. If we don't know about it then the legacy
802 * driver is the right driver anyway.
803 */
804
805static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary)
806{
807 /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
808 if (p->vendor == 0x1078 && p->device == 0x0000) {
809 *primary = *secondary = 1;
810 return;
811 }
812 /* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */
813 if (p->vendor == 0x1078 && p->device == 0x0002) {
814 *primary = *secondary = 1;
815 return;
816 }
817 /* Intel MPIIX - PIO ATA on non PCI side of bridge */
818 if (p->vendor == 0x8086 && p->device == 0x1234) {
819 u16 r;
820 pci_read_config_word(p, 0x6C, &r);
821 if (r & 0x8000) { /* ATA port enabled */
822 if (r & 0x4000)
823 *secondary = 1;
824 else
825 *primary = 1;
826 }
827 return;
828 }
829}
830
831
832/**
833 * legacy_init - attach legacy interfaces
834 *
835 * Attach legacy IDE interfaces by scanning the usual IRQ/port suspects.
836 * Right now we do not scan the ide0 and ide1 address but should do so
837 * for non PCI systems or systems with no PCI IDE legacy mode devices.
838 * If you fix that note there are special cases to consider like VLB
839 * drivers and CS5510/20.
840 */
841
842static __init int legacy_init(void)
843{
844 int i;
845 int ct = 0;
846 int primary = 0;
847 int secondary = 0;
848 int last_port = NR_HOST;
849
850 struct pci_dev *p = NULL;
851
852 for_each_pci_dev(p) {
853 int r;
854 /* Check for any overlap of the system ATA mappings. Native mode controllers
855 stuck on these addresses or some devices in 'raid' mode won't be found by
856 the storage class test */
857 for (r = 0; r < 6; r++) {
858 if (pci_resource_start(p, r) == 0x1f0)
859 primary = 1;
860 if (pci_resource_start(p, r) == 0x170)
861 secondary = 1;
862 }
863 /* Check for special cases */
864 legacy_check_special_cases(p, &primary, &secondary);
865
866 /* If PCI bus is present then don't probe for tertiary legacy ports */
867 if (probe_all == 0)
868 last_port = 2;
869 }
870
Jeff Garzik85cd7252006-08-31 00:03:49 -0400871 /* If an OPTI 82C46X is present find out where the channels are */
Jeff Garzik669a5db2006-08-29 18:12:40 -0400872 if (opti82c46x) {
873 static const char *optis[4] = {
874 "3/463MV", "5MV",
875 "5MVA", "5MVB"
876 };
877 u8 chans = 1;
878 u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
Jeff Garzik85cd7252006-08-31 00:03:49 -0400879
Jeff Garzik669a5db2006-08-29 18:12:40 -0400880 opti82c46x = 3; /* Assume master and slave first */
881 printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]);
882 if (ctrl == 3)
883 chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
884 ctrl = opti_syscfg(0xAC);
885 /* Check enabled and this port is the 465MV port. On the
886 MVB we may have two channels */
887 if (ctrl & 8) {
888 if (ctrl & 4)
889 opti82c46x = 2; /* Slave */
890 else
891 opti82c46x = 1; /* Master */
892 if (chans == 2)
893 opti82c46x = 3; /* Master and Slave */
894 } /* Slave only */
895 else if (chans == 1)
896 opti82c46x = 1;
897 }
898
899 for (i = 0; i < last_port; i++) {
900 /* Skip primary if we have seen a PCI one */
901 if (i == 0 && primary == 1)
902 continue;
903 /* Skip secondary if we have seen a PCI one */
904 if (i == 1 && secondary == 1)
905 continue;
906 if (legacy_init_one(i, legacy_port[i],
907 legacy_port[i] + 0x0206,
908 legacy_irq[i]) == 0)
909 ct++;
910 }
911 if (ct != 0)
912 return 0;
913 return -ENODEV;
914}
915
916static __exit void legacy_exit(void)
917{
918 int i;
919
920 for (i = 0; i < nr_legacy_host; i++) {
921 struct legacy_data *ld = &legacy_data[i];
922 struct ata_port *ap =legacy_host[i]->ports[0];
923 unsigned long io = ap->ioaddr.cmd_addr;
924 unsigned long ctrl = ap->ioaddr.ctl_addr;
925 ata_host_remove(legacy_host[i]);
926 platform_device_unregister(ld->platform_dev);
927 if (ld->timing)
928 release_region(ld->timing, 2);
929 release_region(io, 8);
930 release_region(ctrl, 1);
931 }
932}
933
934MODULE_AUTHOR("Alan Cox");
935MODULE_DESCRIPTION("low-level driver for legacy ATA");
936MODULE_LICENSE("GPL");
937MODULE_VERSION(DRV_VERSION);
938
939module_param(probe_all, int, 0);
940module_param(autospeed, int, 0);
941module_param(ht6560a, int, 0);
942module_param(ht6560b, int, 0);
943module_param(opti82c611a, int, 0);
944module_param(opti82c46x, int, 0);
945module_param(pio_mask, int, 0);
946
947module_init(legacy_init);
948module_exit(legacy_exit);
949