blob: 6f3ea9bbc818b3fc235ace278187341417dad32a [file] [log] [blame]
Denis Chengae210f12008-02-02 17:51:35 +08001menuconfig UIO
Hans J. Kochbeafc542006-12-07 10:58:29 +01002 tristate "Userspace I/O drivers"
Denis Chengae210f12008-02-02 17:51:35 +08003 depends on !S390
Hans J. Kochbeafc542006-12-07 10:58:29 +01004 help
5 Enable this to allow the userspace driver core code to be
6 built. This code allows userspace programs easy access to
7 kernel interrupts and memory locations, allowing some drivers
8 to be written in userspace. Note that a small kernel driver
9 is also required for interrupt handling to work properly.
10
11 If you don't know what to do here, say N.
12
Denis Chengae210f12008-02-02 17:51:35 +080013if UIO
14
Hans-Jürgen Kochbc4c4f42007-03-02 13:03:12 +010015config UIO_CIF
16 tristate "generic Hilscher CIF Card driver"
Uwe Kleine-König934da472008-05-31 11:37:27 +020017 depends on PCI
Hans-Jürgen Kochbc4c4f42007-03-02 13:03:12 +010018 help
19 Driver for Hilscher CIF DeviceNet and Profibus cards. This
Justin P. Mattock631dd1a2010-10-18 11:03:14 +020020 driver requires a userspace component called cif that handles
21 all of the heavy lifting and can be found at:
22 <http://www.osadl.org/projects/downloads/UIO/user/>
Hans-Jürgen Kochbc4c4f42007-03-02 13:03:12 +010023
24 To compile this driver as a module, choose M here: the module
25 will be called uio_cif.
26
Uwe Kleine-König4d80d592008-05-31 11:37:27 +020027config UIO_PDRV
28 tristate "Userspace I/O platform driver"
29 help
30 Generic platform driver for Userspace I/O devices.
31
32 If you don't know what to do here, say N.
33
Magnus Dammc767db02008-07-11 18:55:27 +090034config UIO_PDRV_GENIRQ
35 tristate "Userspace I/O platform driver with generic IRQ handling"
36 help
37 Platform driver for Userspace I/O devices, including generic
38 interrupt handling code. Shared interrupts are not supported.
39
40 This kernel driver requires that the matching userspace driver
41 handles interrupts in a special way. Userspace is responsible
42 for acknowledging the hardware device if needed, and re-enabling
43 interrupts in the interrupt controller using the write() syscall.
44
45 If you don't know what to do here, say N.
46
Brandon Philips1bafeb32009-01-27 13:00:04 -080047config UIO_AEC
48 tristate "AEC video timestamp device"
49 depends on PCI
Brandon Philips1bafeb32009-01-27 13:00:04 -080050 help
51
52 UIO driver for the Adrienne Electronics Corporation PCI time
53 code device.
54
55 This device differs from other UIO devices since it uses I/O
56 ports instead of memory mapped I/O. In order to make it
57 possible for UIO to work with this device a utility, uioport,
58 can be used to read and write the ports:
59
60 git clone git://ifup.org/philips/uioport.git
61
62 If you compile this as a module, it will be called uio_aec.
63
John Ognessa6030fcc2008-09-18 11:57:15 +020064config UIO_SERCOS3
65 tristate "Automata Sercos III PCI card driver"
John Ogness0a965eb2010-02-11 15:38:53 +010066 depends on PCI
John Ognessa6030fcc2008-09-18 11:57:15 +020067 help
68 Userspace I/O interface for the Sercos III PCI card from
69 Automata GmbH. The userspace part of this driver will be
70 available for download from the Automata GmbH web site.
71
72 Automata GmbH: http://www.automataweb.com
73 Sercos III interface: http://www.sercos.com
74
75 If you compile this as a module, it will be called uio_sercos3.
76
Michael S. Tsirkinccb86a62009-07-20 10:29:34 +030077config UIO_PCI_GENERIC
78 tristate "Generic driver for PCI 2.3 and PCI Express cards"
79 depends on PCI
Michael S. Tsirkinccb86a62009-07-20 10:29:34 +030080 help
81 Generic driver that you can bind, dynamically, to any
82 PCI 2.3 compliant and PCI Express card. It is useful,
83 primarily, for virtualization scenarios.
84 If you compile this as a module, it will be called uio_pci_generic.
85
Hans J. Koch8f314cf2010-02-09 20:13:49 +010086config UIO_NETX
87 tristate "Hilscher NetX Card driver"
88 depends on PCI
89 help
90 Driver for Hilscher NetX based fieldbus cards (cifX, comX).
91 This driver requires a userspace component that comes with the card
92 or is available from Hilscher (http://www.hilscher.com).
93
94 To compile this driver as a module, choose M here; the module
95 will be called uio_netx.
96
Pratheesh Gangadharf1a304e2011-03-05 04:30:17 +053097config UIO_PRUSS
98 tristate "Texas Instruments PRUSS driver"
99 depends on ARCH_DAVINCI_DA850
100 help
101 PRUSS driver for OMAPL138/DA850/AM18XX devices
102 PRUSS driver requires user space components, examples and user space
103 driver is available from below SVN repo - you may use anonymous login
104
105 https://gforge.ti.com/gf/project/pru_sw/
106
107 More info on API is available at below wiki
108
109 http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
110
111 To compile this driver as a module, choose M here: the module
112 will be called uio_pruss.
113
Denis Chengae210f12008-02-02 17:51:35 +0800114endif