blob: 1918f5483b23debd923aa5412e9797a2e6bbb46d [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001menu "SCSI device support"
2
James Bottomleyfac829f2010-03-03 11:06:56 +05303config SCSI_MOD
4 tristate
5 default y if SCSI=n || SCSI=y
6 default m if SCSI=m
7
James Bottomley61a7afa2005-08-16 18:27:34 -05008config RAID_ATTRS
9 tristate "RAID Transport Class"
10 default n
David Howells93614012006-09-30 20:45:40 +020011 depends on BLOCK
James Bottomleyfac829f2010-03-03 11:06:56 +053012 depends on SCSI_MOD
James Bottomley61a7afa2005-08-16 18:27:34 -050013 ---help---
14 Provides RAID
15
Linus Torvalds1da177e2005-04-16 15:20:36 -070016config SCSI
17 tristate "SCSI device support"
David Howells93614012006-09-30 20:45:40 +020018 depends on BLOCK
Cornelia Huck7689e822007-07-09 11:59:59 -070019 select SCSI_DMA if HAS_DMA
Ming Lin9b1d6c82016-04-04 14:48:11 -070020 select SG_POOL
Linus Torvalds1da177e2005-04-16 15:20:36 -070021 ---help---
22 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
23 any other SCSI device under Linux, say Y and make sure that you know
24 the name of your SCSI host adapter (the card inside your computer
25 that "speaks" the SCSI protocol, also called SCSI controller),
26 because you will be asked for it.
27
28 You also need to say Y here if you have a device which speaks
29 the SCSI protocol. Examples of this include the parallel port
30 version of the IOMEGA ZIP drive, USB storage devices, Fibre
FUJITA Tomonori93c164a2009-01-02 16:12:51 +010031 Channel, and FireWire storage.
Linus Torvalds1da177e2005-04-16 15:20:36 -070032
33 To compile this driver as a module, choose M here and read
34 <file:Documentation/scsi/scsi.txt>.
35 The module will be called scsi_mod.
36
37 However, do not compile this as a module if your root file system
38 (the one containing the directory /) is located on a SCSI device.
39
Cornelia Huck7689e822007-07-09 11:59:59 -070040config SCSI_DMA
41 bool
42 default n
43
James Smart84314fd2006-08-18 17:30:09 -040044config SCSI_NETLINK
James Bottomley2b7cbe22006-09-07 15:14:46 -050045 bool
James Smart84314fd2006-08-18 17:30:09 -040046 default n
Anish Bhatt5d6be6a2014-09-15 13:45:20 -070047 depends on NET
James Smart84314fd2006-08-18 17:30:09 -040048
Christoph Hellwig24c20f12014-09-30 16:43:46 +020049config SCSI_MQ_DEFAULT
50 bool "SCSI: use blk-mq I/O path by default"
51 depends on SCSI
52 ---help---
53 This option enables the new blk-mq based I/O path for SCSI
54 devices by default. With the option the scsi_mod.use_blk_mq
55 module/boot option defaults to Y, without it to N, but it can
Masanari Iida769a12a2015-04-27 22:52:07 +090056 still be overridden either way.
Christoph Hellwig24c20f12014-09-30 16:43:46 +020057
58 If unsure say N.
59
Linus Torvalds1da177e2005-04-16 15:20:36 -070060config SCSI_PROC_FS
61 bool "legacy /proc/scsi/ support"
62 depends on SCSI && PROC_FS
63 default y
64 ---help---
65 This option enables support for the various files in
Matt LaPlante09509602006-10-03 22:31:37 +020066 /proc/scsi. In Linux 2.6 this has been superseded by
Linus Torvalds1da177e2005-04-16 15:20:36 -070067 files in sysfs but many legacy applications rely on this.
68
Matt LaPlante09509602006-10-03 22:31:37 +020069 If unsure say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -070070
71comment "SCSI support type (disk, tape, CD-ROM)"
72 depends on SCSI
73
74config BLK_DEV_SD
75 tristate "SCSI disk support"
76 depends on SCSI
77 ---help---
78 If you want to use SCSI hard disks, Fibre Channel disks,
Randy Dunlapabcdceb2007-06-11 11:59:34 -070079 Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
Linus Torvalds1da177e2005-04-16 15:20:36 -070080 USB storage or the SCSI or parallel port version of
81 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
82 the Disk-HOWTO and the Multi-Disk-HOWTO, available from
83 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
84 CD-ROMs.
85
86 To compile this driver as a module, choose M here and read
87 <file:Documentation/scsi/scsi.txt>.
88 The module will be called sd_mod.
89
90 Do not compile this driver as a module if your root file system
91 (the one containing the directory /) is located on a SCSI disk.
92 In this case, do not compile the driver for your SCSI host adapter
93 (below) as a module either.
94
95config CHR_DEV_ST
96 tristate "SCSI tape support"
97 depends on SCSI
98 ---help---
99 If you want to use a SCSI tape drive under Linux, say Y and read the
100 SCSI-HOWTO, available from
101 <http://www.tldp.org/docs.html#howto>, and
102 <file:Documentation/scsi/st.txt> in the kernel source. This is NOT
103 for SCSI CD-ROMs.
104
105 To compile this driver as a module, choose M here and read
106 <file:Documentation/scsi/scsi.txt>. The module will be called st.
107
108config CHR_DEV_OSST
109 tristate "SCSI OnStream SC-x0 tape support"
110 depends on SCSI
111 ---help---
Matt LaPlante84eb8d02006-10-03 22:53:09 +0200112 The OnStream SC-x0 SCSI tape drives cannot be driven by the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113 standard st driver, but instead need this special osst driver and
FUJITA Tomonori93c164a2009-01-02 16:12:51 +0100114 use the /dev/osstX char device nodes (major 206). Via usb-storage,
115 you may be able to drive the USB-x0 and DI-x0 drives as well.
116 Note that there is also a second generation of OnStream
Linus Torvalds1da177e2005-04-16 15:20:36 -0700117 tape drives (ADR-x0) that supports the standard SCSI-2 commands for
118 tapes (QIC-157) and can be driven by the standard driver st.
119 For more information, you may have a look at the SCSI-HOWTO
120 <http://www.tldp.org/docs.html#howto> and
121 <file:Documentation/scsi/osst.txt> in the kernel source.
122 More info on the OnStream driver may be found on
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200123 <http://sourceforge.net/projects/osst/>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700124 Please also have a look at the standard st docu, as most of it
125 applies to osst as well.
126
127 To compile this driver as a module, choose M here and read
128 <file:Documentation/scsi/scsi.txt>. The module will be called osst.
129
130config BLK_DEV_SR
131 tristate "SCSI CDROM support"
132 depends on SCSI
133 ---help---
Alan Coxe7fb6d22009-04-01 15:00:18 +0100134 If you want to use a CD or DVD drive attached to your computer
135 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
136 and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
137
138 Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
Linus Torvalds1da177e2005-04-16 15:20:36 -0700139
140 To compile this driver as a module, choose M here and read
141 <file:Documentation/scsi/scsi.txt>.
142 The module will be called sr_mod.
143
144config BLK_DEV_SR_VENDOR
145 bool "Enable vendor-specific extensions (for SCSI CDROM)"
146 depends on BLK_DEV_SR
147 help
148 This enables the usage of vendor specific SCSI commands. This is
149 required to support multisession CDs with old NEC/TOSHIBA cdrom
150 drives (and HP Writers). If you have such a drive and get the first
151 session only, try saying Y here; everybody else says N.
152
153config CHR_DEV_SG
154 tristate "SCSI generic support"
155 depends on SCSI
156 ---help---
157 If you want to use SCSI scanners, synthesizers or CD-writers or just
158 about anything having "SCSI" in its name other than hard disks,
159 CD-ROMs or tapes, say Y here. These won't be supported by the kernel
160 directly, so you need some additional software which knows how to
161 talk to these devices using the SCSI protocol:
162
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200163 For scanners, look at SANE (<http://www.sane-project.org/>). For CD
Linus Torvalds1da177e2005-04-16 15:20:36 -0700164 writer software look at Cdrtools
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200165 (<http://cdrecord.berlios.de/private/cdrecord.html>)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166 and for burning a "disk at once": CDRDAO
167 (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
168 quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
169 For other devices, it's possible that you'll have to write the
170 driver software yourself. Please read the file
171 <file:Documentation/scsi/scsi-generic.txt> for more information.
172
173 To compile this driver as a module, choose M here and read
174 <file:Documentation/scsi/scsi.txt>. The module will be called sg.
175
176 If unsure, say N.
177
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200178config CHR_DEV_SCH
179 tristate "SCSI media changer support"
180 depends on SCSI
181 ---help---
182 This is a driver for SCSI media changers. Most common devices are
183 tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
184 don't need this for those tiny 6-slot cdrom changers. Media
185 changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
186 If you have such hardware and want to use it with linux, say Y
Dirk Hohndele4031492007-10-30 13:37:19 -0700187 here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200188
189 If you want to compile this as a module ( = code which can be
190 inserted in and removed from the running kernel whenever you want),
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500191 say M here and read <file:Documentation/kbuild/modules.txt> and
Dirk Hohndele4031492007-10-30 13:37:19 -0700192 <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200193 If unsure, say N.
James Bottomley9927c682008-02-03 15:48:56 -0600194
195config SCSI_ENCLOSURE
196 tristate "SCSI Enclosure Support"
197 depends on SCSI && ENCLOSURE_SERVICES
James Bottomley3f8d6f22015-12-09 12:56:07 -0800198 depends on m || SCSI_SAS_ATTRS != m
James Bottomley9927c682008-02-03 15:48:56 -0600199 help
200 Enclosures are devices sitting on or in SCSI backplanes that
201 manage devices. If you have a disk cage, the chances are that
202 it has an enclosure device. Selecting this option will just allow
203 certain enclosure conditions to be reported and is not required.
Gerd Knorr daa6eda2005-05-10 10:59:13 +0200204
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205config SCSI_CONSTANTS
Rasmus Villemoese1f0bce2016-03-22 20:32:05 +0100206 bool "Verbose SCSI error reporting (kernel size += 36K)"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700207 depends on SCSI
208 help
209 The error messages regarding your SCSI hardware will be easier to
210 understand if you say Y here; it will enlarge your kernel by about
Rasmus Villemoese1f0bce2016-03-22 20:32:05 +0100211 36 KB. If in doubt, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700212
213config SCSI_LOGGING
214 bool "SCSI logging facility"
215 depends on SCSI
216 ---help---
217 This turns on a logging facility that can be used to debug a number
218 of SCSI related problems.
219
220 If you say Y here, no logging output will appear by default, but you
221 can enable logging by saying Y to "/proc file system support" and
222 "Sysctl support" below and executing the command
223
Robert Love5ef07412009-01-14 11:14:32 -0800224 echo <bitmask> > /proc/sys/dev/scsi/logging_level
Linus Torvalds1da177e2005-04-16 15:20:36 -0700225
Robert Love5ef07412009-01-14 11:14:32 -0800226 where <bitmask> is a four byte value representing the logging type
227 and logging level for each type of logging selected.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700228
Robert Love5ef07412009-01-14 11:14:32 -0800229 There are a number of logging types and you can find them in the
230 source at <file:drivers/scsi/scsi_logging.h>. The logging levels
231 are also described in that file and they determine the verbosity of
232 the logging for each logging type.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700233
234 If you say N here, it may be harder to track down some types of SCSI
235 problems. If you say Y here your kernel will be somewhat larger, but
236 there should be no noticeable performance impact as long as you have
237 logging turned off.
238
Matthew Wilcox21db1882006-11-22 13:24:52 -0700239config SCSI_SCAN_ASYNC
240 bool "Asynchronous SCSI scanning"
241 depends on SCSI
242 help
243 The SCSI subsystem can probe for devices while the rest of the
244 system continues booting, and even probe devices on different
245 busses in parallel, leading to a significant speed-up.
Matthew Wilcox082f6f92007-02-17 19:36:33 +0100246
Matthew Wilcox082f6f92007-02-17 19:36:33 +0100247 You can override this choice by specifying "scsi_mod.scan=sync"
248 or async on the kernel's command line.
Matthew Wilcox21db1882006-11-22 13:24:52 -0700249
Dan Williams3c31b522014-04-10 15:30:35 -0700250 Note that this setting also affects whether resuming from
251 system suspend will be performed asynchronously.
252
James Bottomley2908d772006-08-29 09:22:51 -0500253menu "SCSI Transports"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254 depends on SCSI
255
256config SCSI_SPI_ATTRS
257 tristate "Parallel SCSI (SPI) Transport Attributes"
258 depends on SCSI
259 help
260 If you wish to export transport-specific information about
261 each attached SCSI device to sysfs, say Y. Otherwise, say N.
262
263config SCSI_FC_ATTRS
264 tristate "FiberChannel Transport Attributes"
Randy Dunlap95cd6f42014-09-15 17:20:42 -0700265 depends on SCSI && NET
James Smart84314fd2006-08-18 17:30:09 -0400266 select SCSI_NETLINK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700267 help
268 If you wish to export transport-specific information about
269 each attached FiberChannel device to sysfs, say Y.
270 Otherwise, say N.
271
272config SCSI_ISCSI_ATTRS
273 tristate "iSCSI Transport Attributes"
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700274 depends on SCSI && NET
Mike Christie90eeb012011-07-25 13:48:50 -0500275 select BLK_DEV_BSGLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700276 help
277 If you wish to export transport-specific information about
278 each attached iSCSI device to sysfs, say Y.
279 Otherwise, say N.
280
Christoph Hellwigc7ebbbc2005-09-09 16:22:50 +0200281config SCSI_SAS_ATTRS
282 tristate "SAS Transport Attributes"
Randy Dunlap47259652010-08-18 09:28:43 -0700283 depends on SCSI
284 select BLK_DEV_BSG
Christoph Hellwigc7ebbbc2005-09-09 16:22:50 +0200285 help
286 If you wish to export transport-specific information about
287 each attached SAS device to sysfs, say Y.
288
James Bottomley2908d772006-08-29 09:22:51 -0500289source "drivers/scsi/libsas/Kconfig"
290
FUJITA Tomonori09345f62007-06-27 16:32:39 +0900291config SCSI_SRP_ATTRS
292 tristate "SRP Transport Attributes"
FUJITA Tomonori0012fdf2007-08-02 00:20:34 +0900293 depends on SCSI
FUJITA Tomonori09345f62007-06-27 16:32:39 +0900294 help
295 If you wish to export transport-specific information about
296 each attached SRP device to sysfs, say Y.
297
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298endmenu
299
Jan Engelhardtfc6e7402007-07-09 12:00:08 -0700300menuconfig SCSI_LOWLEVEL
301 bool "SCSI low-level drivers"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700302 depends on SCSI!=n
Jan Engelhardtfc6e7402007-07-09 12:00:08 -0700303 default y
304
James Bottomley67951f62008-03-06 15:32:06 -0600305if SCSI_LOWLEVEL && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700306
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700307config ISCSI_TCP
308 tristate "iSCSI Initiator over TCP/IP"
James Bottomley96bad872005-09-08 09:56:18 -0500309 depends on SCSI && INET
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700310 select CRYPTO
311 select CRYPTO_MD5
312 select CRYPTO_CRC32C
James Bottomley96bad872005-09-08 09:56:18 -0500313 select SCSI_ISCSI_ATTRS
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700314 help
315 The iSCSI Driver provides a host with the ability to access storage
316 through an IP network. The driver uses the iSCSI protocol to transport
317 SCSI requests and responses over a TCP/IP network between the host
318 (the "initiator") and "targets". Architecturally, the iSCSI driver
319 combines with the host's TCP/IP stack, network drivers, and Network
320 Interface Card (NIC) to provide the same functions as a SCSI or a
321 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
322
323 To compile this driver as a module, choose M here: the
324 module will be called iscsi_tcp.
325
326 The userspace component needed to initialize the driver, documentation,
327 and sample configuration files can be found here:
328
FUJITA Tomonoribca10882007-12-13 12:43:31 -0600329 http://open-iscsi.org
Alex Aizmanc899e4e2005-08-04 19:33:15 -0700330
Mike Christieaab7a8f2010-08-02 12:46:12 -0500331config ISCSI_BOOT_SYSFS
332 tristate "iSCSI Boot Sysfs Interface"
333 default n
334 help
335 This option enables support for exposing iSCSI boot information
336 via sysfs to userspace. If you wish to export this information,
337 say Y. Otherwise, say N.
338
kxie@chelsio.com7b36b6e2010-08-16 20:55:53 -0700339source "drivers/scsi/cxgbi/Kconfig"
Michael Chancf4e6362009-06-08 18:14:44 -0700340source "drivers/scsi/bnx2i/Kconfig"
Bhanu Gollapudi853e2bd2011-02-04 12:10:34 -0800341source "drivers/scsi/bnx2fc/Kconfig"
Jayamohan Kallickal6733b392009-09-05 07:36:35 +0530342source "drivers/scsi/be2iscsi/Kconfig"
Matthew R. Ochsc21e0bb2015-06-09 17:15:52 -0500343source "drivers/scsi/cxlflash/Kconfig"
Karen Xiec3673462008-12-09 14:15:32 -0800344
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345config SGIWD93_SCSI
346 tristate "SGI WD93C93 SCSI Driver"
Thomas Bogendoerfer2adbfa32008-01-27 00:25:53 +0100347 depends on SGI_HAS_WD93 && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700348 help
349 If you have a Western Digital WD93 SCSI controller on
350 an SGI MIPS system, say Y. Otherwise, say N.
351
Linus Torvalds1da177e2005-04-16 15:20:36 -0700352config BLK_DEV_3W_XXXX_RAID
353 tristate "3ware 5/6/7/8xxx ATA-RAID support"
354 depends on PCI && SCSI
355 help
356 3ware is the only hardware ATA-Raid product in Linux to date.
357 This card is 2,4, or 8 channel master mode support only.
358 SCSI support required!!!
359
360 <http://www.3ware.com/>
361
362 Please read the comments at the top of
363 <file:drivers/scsi/3w-xxxx.c>.
364
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800365config SCSI_HPSA
366 tristate "HP Smart Array SCSI driver"
367 depends on PCI && SCSI
Akinobu Mita0fc9fd42012-04-04 22:14:59 +0900368 select CHECK_SIGNATURE
Arnd Bergmann653cfb82015-11-19 23:04:35 +0100369 select SCSI_SAS_ATTRS
Stephen M. Cameronedd16362009-12-08 14:09:11 -0800370 help
371 This driver supports HP Smart Array Controllers (circa 2009).
372 It is a SCSI alternative to the cciss driver, which is a block
373 driver. Anyone wishing to use HP Smart Array controllers who
374 would prefer the devices be presented to linux as SCSI devices,
375 rather than as generic block devices should say Y here.
376
Linus Torvalds1da177e2005-04-16 15:20:36 -0700377config SCSI_3W_9XXX
378 tristate "3ware 9xxx SATA-RAID support"
379 depends on PCI && SCSI
380 help
381 This driver supports the 9000 series 3ware SATA-RAID cards.
382
383 <http://www.amcc.com>
384
385 Please read the comments at the top of
386 <file:drivers/scsi/3w-9xxx.c>.
387
adam radfordf6191062009-10-23 14:52:33 -0700388config SCSI_3W_SAS
389 tristate "3ware 97xx SAS/SATA-RAID support"
390 depends on PCI && SCSI
391 help
392 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
393
394 <http://www.lsi.com>
395
396 Please read the comments at the top of
397 <file:drivers/scsi/3w-sas.c>.
398
Linus Torvalds1da177e2005-04-16 15:20:36 -0700399config SCSI_7000FASST
400 tristate "7000FASST SCSI support"
Al Viroa5532602005-05-04 05:39:42 +0100401 depends on ISA && SCSI && ISA_DMA_API
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700402 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700403 help
404 This driver supports the Western Digital 7000 SCSI host adapter
405 family. Some information is in the source:
406 <file:drivers/scsi/wd7000.c>.
407
408 To compile this driver as a module, choose M here: the
409 module will be called wd7000.
410
411config SCSI_ACARD
412 tristate "ACARD SCSI support"
413 depends on PCI && SCSI
414 help
415 This driver supports the ACARD SCSI host adapter.
416 Support Chip <ATP870 ATP876 ATP880 ATP885>
417 To compile this driver as a module, choose M here: the
418 module will be called atp870u.
419
420config SCSI_AHA152X
421 tristate "Adaptec AHA152X/2825 support"
Alan Coxfa7250d2012-07-12 16:40:15 +0100422 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500423 select SCSI_SPI_ATTRS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700424 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700425 ---help---
426 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
427 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
428 must be manually specified in this case.
429
430 It is explained in section 3.3 of the SCSI-HOWTO, available from
431 <http://www.tldp.org/docs.html#howto>. You might also want to
432 read the file <file:Documentation/scsi/aha152x.txt>.
433
434 To compile this driver as a module, choose M here: the
435 module will be called aha152x.
436
437config SCSI_AHA1542
438 tristate "Adaptec AHA1542 support"
Al Viroa5532602005-05-04 05:39:42 +0100439 depends on ISA && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700440 ---help---
441 This is support for a SCSI host adapter. It is explained in section
442 3.4 of the SCSI-HOWTO, available from
443 <http://www.tldp.org/docs.html#howto>. Note that Trantor was
444 purchased by Adaptec, and some former Trantor products are being
445 sold under the Adaptec name. If it doesn't work out of the box, you
446 may have to change some settings in <file:drivers/scsi/aha1542.h>.
447
448 To compile this driver as a module, choose M here: the
449 module will be called aha1542.
450
451config SCSI_AHA1740
452 tristate "Adaptec AHA1740 support"
453 depends on EISA && SCSI
454 ---help---
455 This is support for a SCSI host adapter. It is explained in section
456 3.5 of the SCSI-HOWTO, available from
457 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
458 of the box, you may have to change some settings in
459 <file:drivers/scsi/aha1740.h>.
460
461 To compile this driver as a module, choose M here: the
462 module will be called aha1740.
463
464config SCSI_AACRAID
465 tristate "Adaptec AACRAID support"
466 depends on SCSI && PCI
Adrian Bunk8075f212006-03-20 20:21:24 +0100467 help
468 This driver supports a variety of Dell, HP, Adaptec, IBM and
469 ICP storage products. For a list of supported products, refer
470 to <file:Documentation/scsi/aacraid.txt>.
471
472 To compile this driver as a module, choose M here: the module
473 will be called aacraid.
474
Linus Torvalds1da177e2005-04-16 15:20:36 -0700475
476source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
James Bottomley2908d772006-08-29 09:22:51 -0500478source "drivers/scsi/aic94xx/Kconfig"
John Garrye8899fa2015-11-18 00:50:30 +0800479source "drivers/scsi/hisi_sas/Kconfig"
Jeff Garzik2ad52f42009-05-08 16:35:37 -0400480source "drivers/scsi/mvsas/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700481
Jianyun Lif0c568a2011-05-11 23:22:44 +0800482config SCSI_MVUMI
483 tristate "Marvell UMI driver"
484 depends on SCSI && PCI
485 help
486 Module for Marvell Universal Message Interface(UMI) driver
487
488 To compile this driver as a module, choose M here: the
489 module will be called mvumi.
490
Linus Torvalds1da177e2005-04-16 15:20:36 -0700491config SCSI_DPT_I2O
492 tristate "Adaptec I2O RAID support "
Miquel van Smoorenburg62ac5ae2008-05-02 01:07:27 +0200493 depends on SCSI && PCI && VIRT_TO_BUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700494 help
495 This driver supports all of Adaptec's I2O based RAID controllers as
496 well as the DPT SmartRaid V cards. This is an Adaptec maintained
497 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
498
499 To compile this driver as a module, choose M here: the
500 module will be called dpt_i2o.
501
502config SCSI_ADVANSYS
503 tristate "AdvanSys SCSI support"
Hannes Reinecke6571fb32015-04-24 13:18:42 +0200504 depends on SCSI
Linus Torvalds4661e3e2006-04-29 14:27:13 -0700505 depends on ISA || EISA || PCI
Arnd Bergmann2b8bbdb2015-11-19 15:22:23 +0100506 depends on ISA_DMA_API || !ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700507 help
508 This is a driver for all SCSI host adapters manufactured by
509 AdvanSys. It is documented in the kernel source in
510 <file:drivers/scsi/advansys.c>.
511
512 To compile this driver as a module, choose M here: the
513 module will be called advansys.
514
515config SCSI_IN2000
516 tristate "Always IN2000 SCSI support"
517 depends on ISA && SCSI
518 help
519 This is support for an ISA bus SCSI host adapter. You'll find more
520 information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
521 out of the box, you may have to change the jumpers for IRQ or
522 address selection.
523
524 To compile this driver as a module, choose M here: the
525 module will be called in2000.
526
Erich Chen1c57e862006-07-12 08:59:32 -0700527config SCSI_ARCMSR
Nick Cheng1a4f5502007-09-13 17:26:40 +0800528 tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
Erich Chen1c57e862006-07-12 08:59:32 -0700529 depends on PCI && SCSI
530 help
Nick Cheng1a4f5502007-09-13 17:26:40 +0800531 This driver supports all of ARECA's SATA/SAS RAID controller cards.
Erich Chen1c57e862006-07-12 08:59:32 -0700532 This is an ARECA-maintained driver by Erich Chen.
Nick Cheng1a4f5502007-09-13 17:26:40 +0800533 If you have any problems, please mail to: <erich@areca.com.tw>.
Erich Chen1c57e862006-07-12 08:59:32 -0700534 Areca supports Linux RAID config tools.
Nick Cheng1a4f5502007-09-13 17:26:40 +0800535 Please link <http://www.areca.com.tw>
Erich Chen1c57e862006-07-12 08:59:32 -0700536
537 To compile this driver as a module, choose M here: the
538 module will be called arcmsr (modprobe arcmsr).
539
Bradley Grove26780d92013-08-23 10:35:45 -0400540source "drivers/scsi/esas2r/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700541source "drivers/scsi/megaraid/Kconfig.megaraid"
Sreekanth Reddyf92363d2012-11-30 07:44:21 +0530542source "drivers/scsi/mpt3sas/Kconfig"
Santosh Yaraganavi7a3e97b2012-02-29 12:11:50 +0530543source "drivers/scsi/ufs/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700544
HighPoint Linux Teamede1e6f2006-05-16 14:38:09 +0800545config SCSI_HPTIOP
HighPoint Linux Team00f59702007-12-13 16:14:26 -0800546 tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
HighPoint Linux Teamede1e6f2006-05-16 14:38:09 +0800547 depends on SCSI && PCI
548 help
HighPoint Linux Team00f59702007-12-13 16:14:26 -0800549 This option enables support for HighPoint RocketRAID 3xxx/4xxx
HighPoint Linux Teamede1e6f2006-05-16 14:38:09 +0800550 controllers.
551
552 To compile this driver as a module, choose M here; the module
553 will be called hptiop. If unsure, say N.
554
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555config SCSI_BUSLOGIC
556 tristate "BusLogic SCSI support"
Stephen Rothwellf057eac2007-07-15 23:40:05 -0700557 depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558 ---help---
559 This is support for BusLogic MultiMaster and FlashPoint SCSI Host
560 Adapters. Consult the SCSI-HOWTO, available from
561 <http://www.tldp.org/docs.html#howto>, and the files
562 <file:Documentation/scsi/BusLogic.txt> and
563 <file:Documentation/scsi/FlashPoint.txt> for more information.
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600564 Note that support for FlashPoint is only available for 32-bit
565 x86 configurations.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700566
567 To compile this driver as a module, choose M here: the
568 module will be called BusLogic.
569
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600570config SCSI_FLASHPOINT
571 bool "FlashPoint support"
Khalid Aziz391e2f22013-05-16 19:44:14 -0600572 depends on SCSI_BUSLOGIC && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700573 help
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600574 This option allows you to add FlashPoint support to the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700575 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
Matthew Wilcox78b4b052008-03-13 06:55:08 -0600576 substantial, so users of MultiMaster Host Adapters may not
577 wish to include it.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700578
Alok Kataria851b1642009-10-13 14:51:05 -0700579config VMWARE_PVSCSI
580 tristate "VMware PVSCSI driver support"
581 depends on PCI && SCSI && X86
582 help
583 This driver supports VMware's para virtualized SCSI HBA.
584 To compile this driver as a module, choose M here: the
585 module will be called vmw_pvscsi.
586
Juergen Gross8beb8d42014-08-28 06:44:11 +0200587config XEN_SCSI_FRONTEND
588 tristate "XEN SCSI frontend driver"
589 depends on SCSI && XEN
Juergen Gross8ab85eb2014-09-15 06:45:01 +0200590 select XEN_XENBUS_FRONTEND
Juergen Gross8beb8d42014-08-28 06:44:11 +0200591 help
592 The XEN SCSI frontend driver allows the kernel to access SCSI Devices
593 within another guest OS (usually Dom0).
594 Only needed if the kernel is running in a XEN guest and generic
595 SCSI access to a device is needed.
596
K. Y. Srinivasan89ae7d72012-02-09 14:14:48 -0800597config HYPERV_STORAGE
598 tristate "Microsoft Hyper-V virtual storage driver"
599 depends on SCSI && HYPERV
K. Y. Srinivasan8063d562016-02-26 17:48:58 -0800600 depends on m || SCSI_FC_ATTRS != m
K. Y. Srinivasan89ae7d72012-02-09 14:14:48 -0800601 default HYPERV
602 help
603 Select this option to enable the Hyper-V virtual storage driver.
604
Robert Love42e9a922008-12-09 15:10:17 -0800605config LIBFC
606 tristate "LibFC module"
Randy Dunlap6a387922014-09-16 13:47:41 -0700607 depends on SCSI_FC_ATTRS
Randy Dunlapd943aee2009-01-12 10:50:58 -0800608 select CRC32
Robert Love42e9a922008-12-09 15:10:17 -0800609 ---help---
610 Fibre Channel library module
611
Vasu Dev9b34ecf2009-03-17 11:42:13 -0700612config LIBFCOE
613 tristate "LibFCoE module"
David S. Millerdf568d82014-09-22 13:14:33 -0400614 depends on LIBFC
Vasu Dev9b34ecf2009-03-17 11:42:13 -0700615 ---help---
616 Library for Fibre Channel over Ethernet module
617
Robert Love85b4aa42008-12-09 15:10:24 -0800618config FCOE
619 tristate "FCoE module"
James Bottomleyfb5edd02008-12-30 09:44:29 -0600620 depends on PCI
David S. Millerdf568d82014-09-22 13:14:33 -0400621 depends on LIBFCOE
Robert Love85b4aa42008-12-09 15:10:24 -0800622 ---help---
623 Fibre Channel over Ethernet module
624
Abhijeet Joglekar5df6d732009-04-17 18:33:26 -0700625config FCOE_FNIC
626 tristate "Cisco FNIC Driver"
627 depends on PCI && X86
David S. Millerdf568d82014-09-22 13:14:33 -0400628 depends on LIBFCOE
Abhijeet Joglekar5df6d732009-04-17 18:33:26 -0700629 help
630 This is support for the Cisco PCI-Express FCoE HBA.
631
632 To compile this driver as a module, choose M here and read
633 <file:Documentation/scsi/scsi.txt>.
634 The module will be called fnic.
635
Narsimhulu Musinic8806b62015-05-29 01:04:01 -0700636config SCSI_SNIC
637 tristate "Cisco SNIC Driver"
638 depends on PCI && SCSI
639 help
640 This is support for the Cisco PCI-Express SCSI HBA.
641
642 To compile this driver as a module, choose M here and read
643 <file:Documentation/scsi/scsi.txt>.
644 The module will be called snic.
645
646config SCSI_SNIC_DEBUG_FS
647 bool "Cisco SNIC Driver Debugfs Support"
648 depends on SCSI_SNIC && DEBUG_FS
649 help
650 This enables to list debugging information from SNIC Driver
651 available via debugfs file system
652
Linus Torvalds1da177e2005-04-16 15:20:36 -0700653config SCSI_DMX3191D
654 tristate "DMX3191D SCSI support"
655 depends on PCI && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500656 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700657 help
658 This is support for Domex DMX3191D SCSI Host Adapters.
659
660 To compile this driver as a module, choose M here: the
661 module will be called dmx3191d.
662
663config SCSI_DTC3280
664 tristate "DTC3180/3280 SCSI support"
665 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500666 select SCSI_SPI_ATTRS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700667 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700668 help
669 This is support for DTC 3180/3280 SCSI Host Adapters. Please read
670 the SCSI-HOWTO, available from
671 <http://www.tldp.org/docs.html#howto>, and the file
672 <file:Documentation/scsi/dtc3x80.txt>.
673
674 To compile this driver as a module, choose M here: the
675 module will be called dtc.
676
677config SCSI_EATA
678 tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
Al Viroa5532602005-05-04 05:39:42 +0100679 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700680 ---help---
681 This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
682 ISA and all EISA I/O addresses are probed looking for the "EATA"
683 signature. The addresses of all the PCI SCSI controllers reported
684 by the PCI subsystem are probed as well.
685
686 You want to read the start of <file:drivers/scsi/eata.c> and the
687 SCSI-HOWTO, available from
688 <http://www.tldp.org/docs.html#howto>.
689
690 To compile this driver as a module, choose M here: the
691 module will be called eata.
692
693config SCSI_EATA_TAGGED_QUEUE
694 bool "enable tagged command queueing"
695 depends on SCSI_EATA
696 help
697 This is a feature of SCSI-2 which improves performance: the host
698 adapter can send several SCSI commands to a device's queue even if
699 previous commands haven't finished yet.
700 This is equivalent to the "eata=tc:y" boot option.
701
702config SCSI_EATA_LINKED_COMMANDS
703 bool "enable elevator sorting"
704 depends on SCSI_EATA
705 help
706 This option enables elevator sorting for all probed SCSI disks and
707 CD-ROMs. It definitely reduces the average seek distance when doing
708 random seeks, but this does not necessarily result in a noticeable
709 performance improvement: your mileage may vary...
710 This is equivalent to the "eata=lc:y" boot option.
711
712config SCSI_EATA_MAX_TAGS
713 int "maximum number of queued commands"
714 depends on SCSI_EATA
715 default "16"
716 help
717 This specifies how many SCSI commands can be maximally queued for
718 each probed SCSI device. You should reduce the default value of 16
719 only if you have disks with buggy or limited tagged command support.
720 Minimum is 2 and maximum is 62. This value is also the window size
721 used by the elevator sorting option above. The effective value used
722 by the driver for each probed SCSI device is reported at boot time.
723 This is equivalent to the "eata=mq:8" boot option.
724
725config SCSI_EATA_PIO
726 tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
727 depends on (ISA || EISA || PCI) && SCSI && BROKEN
728 ---help---
729 This driver supports all EATA-PIO protocol compliant SCSI Host
730 Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
731 host adapters could also use this driver but are discouraged from
732 doing so, since this driver only supports hard disks and lacks
733 numerous features. You might want to have a look at the SCSI-HOWTO,
734 available from <http://www.tldp.org/docs.html#howto>.
735
736 To compile this driver as a module, choose M here: the
737 module will be called eata_pio.
738
739config SCSI_FUTURE_DOMAIN
740 tristate "Future Domain 16xx SCSI/AHA-2920A support"
741 depends on (ISA || PCI) && SCSI
Geert Uytterhoeven928923c2007-08-22 14:01:36 -0700742 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700743 ---help---
744 This is support for Future Domain's 16-bit SCSI host adapters
745 (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
746 other adapters based on the Future Domain chipsets (Quantum
747 ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board).
748 It is explained in section 3.7 of the SCSI-HOWTO, available from
749 <http://www.tldp.org/docs.html#howto>.
750
751 NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
752 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
753 controller support"). This Future Domain driver works with the older
754 Adaptec AHA-2920A boards with a Future Domain chip on them.
755
756 To compile this driver as a module, choose M here: the
757 module will be called fdomain.
758
Linus Torvalds1da177e2005-04-16 15:20:36 -0700759config SCSI_GDTH
760 tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
Sergio Luis99109302008-02-12 20:48:03 -0300761 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700762 ---help---
763 Formerly called GDT SCSI Disk Array Controller Support.
764
765 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
766 manufactured by Intel Corporation/ICP vortex GmbH. It is documented
767 in the kernel source in <file:drivers/scsi/gdth.c> and
Johann Felix Soden889c94a2008-01-20 14:41:18 +0100768 <file:drivers/scsi/gdth.h>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700769
770 To compile this driver as a module, choose M here: the
771 module will be called gdth.
772
Dan Williams6f231dd2011-07-02 22:56:22 -0700773config SCSI_ISCI
774 tristate "Intel(R) C600 Series Chipset SAS Controller"
775 depends on PCI && SCSI
Dan Williams6f231dd2011-07-02 22:56:22 -0700776 depends on X86
Dan Williams6f231dd2011-07-02 22:56:22 -0700777 select SCSI_SAS_LIBSAS
778 ---help---
779 This driver supports the 6Gb/s SAS capabilities of the storage
780 control unit found in the Intel(R) C600 series chipset.
781
Linus Torvalds1da177e2005-04-16 15:20:36 -0700782config SCSI_GENERIC_NCR5380
783 tristate "Generic NCR5380/53c400 SCSI PIO support"
784 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500785 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700786 ---help---
787 This is a driver for the old NCR 53c80 series of SCSI controllers
788 on boards using PIO. Most boards such as the Trantor T130 fit this
789 category, along with a large number of ISA 8bit controllers shipped
790 for free with SCSI scanners. If you have a PAS16, T128 or DMX3191
791 you should select the specific driver for that card rather than
792 generic 5380 support.
793
794 It is explained in section 3.8 of the SCSI-HOWTO, available from
795 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
796 of the box, you may have to change some settings in
797 <file:drivers/scsi/g_NCR5380.h>.
798
799 To compile this driver as a module, choose M here: the
800 module will be called g_NCR5380.
801
802config SCSI_GENERIC_NCR5380_MMIO
803 tristate "Generic NCR5380/53c400 SCSI MMIO support"
804 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -0500805 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 ---help---
807 This is a driver for the old NCR 53c80 series of SCSI controllers
808 on boards using memory mapped I/O.
809 It is explained in section 3.8 of the SCSI-HOWTO, available from
810 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
811 of the box, you may have to change some settings in
812 <file:drivers/scsi/g_NCR5380.h>.
813
814 To compile this driver as a module, choose M here: the
815 module will be called g_NCR5380_mmio.
816
Linus Torvalds1da177e2005-04-16 15:20:36 -0700817config SCSI_IPS
818 tristate "IBM ServeRAID support"
819 depends on PCI && SCSI
820 ---help---
821 This is support for the IBM ServeRAID hardware RAID controllers.
822 See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
Justin P. Mattock631dd1a2010-10-18 11:03:14 +0200823 and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700824 for more information. If this driver does not work correctly
825 without modification please contact the author by email at
826 <ipslinux@adaptec.com>.
827
828 To compile this driver as a module, choose M here: the
829 module will be called ips.
830
831config SCSI_IBMVSCSI
832 tristate "IBM Virtual SCSI support"
Stephen Rothwell78347992012-03-07 18:35:38 +0000833 depends on PPC_PSERIES
FUJITA Tomonori4d680412007-06-27 16:32:50 +0900834 select SCSI_SRP_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700835 help
836 This is the IBM POWER Virtual SCSI Client
837
838 To compile this driver as a module, choose M here: the
Wade Cline46beb542012-12-18 23:11:28 -0800839 module will be called ibmvscsi.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700840
Brian King072b91f2008-07-01 13:14:30 -0500841config SCSI_IBMVFC
842 tristate "IBM Virtual FC support"
843 depends on PPC_PSERIES && SCSI
Randy Dunlap6a387922014-09-16 13:47:41 -0700844 depends on SCSI_FC_ATTRS
Brian King072b91f2008-07-01 13:14:30 -0500845 help
846 This is the IBM POWER Virtual FC Client
847
848 To compile this driver as a module, choose M here: the
849 module will be called ibmvfc.
850
851config SCSI_IBMVFC_TRACE
852 bool "enable driver internal trace"
853 depends on SCSI_IBMVFC
854 default y
855 help
856 If you say Y here, the driver will trace all commands issued
857 to the adapter. Performance impact is minimal. Trace can be
858 dumped using /sys/class/scsi_host/hostXX/trace.
859
Linus Torvalds1da177e2005-04-16 15:20:36 -0700860config SCSI_INITIO
861 tristate "Initio 9100U(W) support"
862 depends on PCI && SCSI
863 help
864 This is support for the Initio 91XXU(W) SCSI host adapter. Please
865 read the SCSI-HOWTO, available from
866 <http://www.tldp.org/docs.html#howto>.
867
868 To compile this driver as a module, choose M here: the
869 module will be called initio.
870
871config SCSI_INIA100
872 tristate "Initio INI-A100U2W support"
873 depends on PCI && SCSI
874 help
875 This is support for the Initio INI-A100U2W SCSI host adapter.
876 Please read the SCSI-HOWTO, available from
877 <http://www.tldp.org/docs.html#howto>.
878
879 To compile this driver as a module, choose M here: the
880 module will be called a100u2w.
881
882config SCSI_PPA
883 tristate "IOMEGA parallel port (ppa - older drives)"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800884 depends on SCSI && PARPORT_PC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700885 ---help---
886 This driver supports older versions of IOMEGA's parallel port ZIP
887 drive (a 100 MB removable media device).
888
889 Note that you can say N here if you have the SCSI version of the ZIP
890 drive: it will be supported automatically if you said Y to the
891 generic "SCSI disk support", above.
892
893 If you have the ZIP Plus drive or a more recent parallel port ZIP
894 drive (if the supplied cable with the drive is labeled "AutoDetect")
895 then you should say N here and Y to "IOMEGA parallel port (imm -
896 newer drives)", below.
897
898 For more information about this driver and how to use it you should
899 read the file <file:Documentation/scsi/ppa.txt>. You should also read
900 the SCSI-HOWTO, which is available from
901 <http://www.tldp.org/docs.html#howto>. If you use this driver,
902 you will still be able to use the parallel port for other tasks,
903 such as a printer; it is safe to compile both drivers into the
904 kernel.
905
906 To compile this driver as a module, choose M here: the
907 module will be called ppa.
908
909config SCSI_IMM
910 tristate "IOMEGA parallel port (imm - newer drives)"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800911 depends on SCSI && PARPORT_PC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700912 ---help---
913 This driver supports newer versions of IOMEGA's parallel port ZIP
914 drive (a 100 MB removable media device).
915
916 Note that you can say N here if you have the SCSI version of the ZIP
917 drive: it will be supported automatically if you said Y to the
918 generic "SCSI disk support", above.
919
920 If you have the ZIP Plus drive or a more recent parallel port ZIP
921 drive (if the supplied cable with the drive is labeled "AutoDetect")
922 then you should say Y here; if you have an older ZIP drive, say N
923 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
924
925 For more information about this driver and how to use it you should
926 read the file <file:Documentation/scsi/ppa.txt>. You should also read
927 the SCSI-HOWTO, which is available from
928 <http://www.tldp.org/docs.html#howto>. If you use this driver,
929 you will still be able to use the parallel port for other tasks,
930 such as a printer; it is safe to compile both drivers into the
931 kernel.
932
933 To compile this driver as a module, choose M here: the
934 module will be called imm.
935
936config SCSI_IZIP_EPP16
937 bool "ppa/imm option - Use slow (but safe) EPP-16"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800938 depends on SCSI_PPA || SCSI_IMM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700939 ---help---
940 EPP (Enhanced Parallel Port) is a standard for parallel ports which
941 allows them to act as expansion buses that can handle up to 64
942 peripheral devices.
943
944 Some parallel port chipsets are slower than their motherboard, and
945 so we have to control the state of the chipset's FIFO queue every
946 now and then to avoid data loss. This will be done if you say Y
947 here.
948
949 Generally, saying Y is the safe option and slows things down a bit.
950
951config SCSI_IZIP_SLOW_CTR
952 bool "ppa/imm option - Assume slow parport control register"
Marko Kohtala6a19b412006-01-06 00:19:49 -0800953 depends on SCSI_PPA || SCSI_IMM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700954 help
955 Some parallel ports are known to have excessive delays between
956 changing the parallel port control register and good data being
957 available on the parallel port data/status register. This option
958 forces a small delay (1.0 usec to be exact) after changing the
959 control register to let things settle out. Enabling this option may
960 result in a big drop in performance but some very old parallel ports
961 (found in 386 vintage machines) will not work properly.
962
963 Generally, saying N is fine.
964
965config SCSI_NCR53C406A
966 tristate "NCR53c406a SCSI support"
967 depends on ISA && SCSI
968 help
969 This is support for the NCR53c406a SCSI host adapter. For user
970 configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
971 in the kernel source. Also read the SCSI-HOWTO, available from
972 <http://www.tldp.org/docs.html#howto>.
973
974 To compile this driver as a module, choose M here: the
975 module will be called NCR53c406.
976
977config SCSI_NCR_D700
978 tristate "NCR Dual 700 MCA SCSI support"
979 depends on MCA && SCSI
980 select SCSI_SPI_ATTRS
981 help
982 This is a driver for the MicroChannel Dual 700 card produced by
983 NCR and commonly used in 345x/35xx/4100 class machines. It always
984 tries to negotiate sync and uses tag command queueing.
985
986 Unless you have an NCR manufactured machine, the chances are that
987 you do not have this SCSI card, so say N.
988
Linus Torvalds1da177e2005-04-16 15:20:36 -0700989config SCSI_LASI700
990 tristate "HP Lasi SCSI support for 53c700/710"
991 depends on GSC && SCSI
992 select SCSI_SPI_ATTRS
993 help
994 This is a driver for the SCSI controller in the Lasi chip found in
995 many PA-RISC workstations & servers. If you do not know whether you
996 have a Lasi chip, it is safe to say "Y" here.
997
Thomas Bogendoerferc27d85f2006-12-25 21:32:04 +0100998config SCSI_SNI_53C710
999 tristate "SNI RM SCSI support for 53c710"
1000 depends on SNI_RM && SCSI
1001 select SCSI_SPI_ATTRS
1002 select 53C700_LE_ON_BE
1003 help
1004 This is a driver for the onboard SCSI controller found in older
1005 SNI RM workstations & servers.
1006
Linus Torvalds1da177e2005-04-16 15:20:36 -07001007config 53C700_LE_ON_BE
1008 bool
1009 depends on SCSI_LASI700
1010 default y
1011
Jeff Garzik5a25ba12006-09-01 03:12:19 -04001012config SCSI_STEX
1013 tristate "Promise SuperTrak EX Series support"
1014 depends on PCI && SCSI
1015 ---help---
Ed Linee926b22006-12-04 17:49:36 -08001016 This driver supports Promise SuperTrak EX series storage controllers.
1017
1018 Promise provides Linux RAID configuration utility for these
1019 controllers. Please visit <http://www.promise.com> to download.
1020
1021 To compile this driver as a module, choose M here: the
1022 module will be called stex.
Jeff Garzik5a25ba12006-09-01 03:12:19 -04001023
Kars de Jong63273132007-06-17 14:47:05 +02001024config 53C700_BE_BUS
1025 bool
Kars de Jong45804fb2007-06-17 14:47:09 +02001026 depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI
Kars de Jong63273132007-06-17 14:47:05 +02001027 default y
1028
Linus Torvalds1da177e2005-04-16 15:20:36 -07001029config SCSI_SYM53C8XX_2
1030 tristate "SYM53C8XX Version 2 SCSI support"
1031 depends on PCI && SCSI
1032 select SCSI_SPI_ATTRS
1033 ---help---
1034 This driver supports the whole NCR53C8XX/SYM53C8XX family of
1035 PCI-SCSI controllers. It also supports the subset of LSI53C10XX
1036 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
1037 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
1038 controllers; you need to use the Fusion MPT driver for that.
1039
1040 Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
1041 information.
1042
1043config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
1044 int "DMA addressing mode"
1045 depends on SCSI_SYM53C8XX_2
1046 default "1"
1047 ---help---
1048 This option only applies to PCI-SCSI chips that are PCI DAC
1049 capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
1050
1051 When set to 0, the driver will program the chip to only perform
1052 32-bit DMA. When set to 1, the chip will be able to perform DMA
1053 to addresses up to 1TB. When set to 2, the driver supports the
1054 full 64-bit DMA address range, but can only address 16 segments
1055 of 4 GB each. This limits the total addressable range to 64 GB.
1056
1057 Most machines with less than 4GB of memory should use a setting
1058 of 0 for best performance. If your machine has 4GB of memory
1059 or more, you should set this option to 1 (the default).
1060
1061 The still experimental value 2 (64 bit DMA addressing with 16
1062 x 4GB segments limitation) can be used on systems that require
1063 PCI address bits past bit 39 to be set for the addressing of
1064 memory using PCI DAC cycles.
1065
1066config SCSI_SYM53C8XX_DEFAULT_TAGS
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001067 int "Default tagged command queue depth"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001068 depends on SCSI_SYM53C8XX_2
1069 default "16"
1070 help
1071 This is the default value of the command queue depth the
1072 driver will announce to the generic SCSI layer for devices
1073 that support tagged command queueing. This value can be changed
1074 from the boot command line. This is a soft limit that cannot
1075 exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
1076
1077config SCSI_SYM53C8XX_MAX_TAGS
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001078 int "Maximum number of queued commands"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001079 depends on SCSI_SYM53C8XX_2
1080 default "64"
1081 help
1082 This option allows you to specify the maximum number of commands
1083 that can be queued to any device, when tagged command queuing is
1084 possible. The driver supports up to 256 queued commands per device.
1085 This value is used as a compiled-in hard limit.
1086
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001087config SCSI_SYM53C8XX_MMIO
1088 bool "Use memory mapped IO"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001089 depends on SCSI_SYM53C8XX_2
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001090 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001091 help
Matthew Wilcox1f61d822006-03-28 11:03:43 -05001092 Memory mapped IO is faster than Port IO. Most people should
1093 answer Y here, but some machines may have problems. If you have
1094 to answer N here, please report the problem to the maintainer.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001095
1096config SCSI_IPR
1097 tristate "IBM Power Linux RAID adapter support"
Brian King35a39692006-09-25 12:39:20 -05001098 depends on PCI && SCSI && ATA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001099 select FW_LOADER
Christoph Hellwig511cbce2015-11-10 14:56:14 +01001100 select IRQ_POLL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001101 ---help---
1102 This driver supports the IBM Power Linux family RAID adapters.
1103 This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
1104 as IBM iSeries 5702, 5703, 5709, and 570A.
1105
1106config SCSI_IPR_TRACE
1107 bool "enable driver internal trace"
1108 depends on SCSI_IPR
Brian Kingefbbdd82006-11-21 10:28:16 -06001109 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001110 help
1111 If you say Y here, the driver will trace all commands issued
1112 to the adapter. Performance impact is minimal. Trace can be
1113 dumped using /sys/bus/class/scsi_host/hostXX/trace.
1114
1115config SCSI_IPR_DUMP
1116 bool "enable adapter dump support"
1117 depends on SCSI_IPR
Brian Kingefbbdd82006-11-21 10:28:16 -06001118 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001119 help
1120 If you say Y here, the driver will support adapter crash dump.
1121 If you enable this support, the iprdump daemon can be used
1122 to capture adapter failure analysis information.
1123
1124config SCSI_ZALON
1125 tristate "Zalon SCSI support"
1126 depends on GSC && SCSI
1127 select SCSI_SPI_ATTRS
1128 help
1129 The Zalon is a GSC/HSC bus interface chip that sits between the
1130 PA-RISC processor and the NCR 53c720 SCSI controller on C100,
1131 C110, J200, J210 and some D, K & R-class machines. It's also
1132 used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
1133 Say Y here if you have one of these machines or cards.
1134
1135config SCSI_NCR_Q720
1136 tristate "NCR Quad 720 MCA SCSI support"
1137 depends on MCA && SCSI
1138 select SCSI_SPI_ATTRS
1139 help
1140 This is a driver for the MicroChannel Quad 720 card produced by
1141 NCR and commonly used in 345x/35xx/4100 class machines. It always
1142 tries to negotiate sync and uses tag command queueing.
1143
1144 Unless you have an NCR manufactured machine, the chances are that
1145 you do not have this SCSI card, so say N.
1146
1147config SCSI_NCR53C8XX_DEFAULT_TAGS
Roman Zippele55a3e82006-06-08 22:12:49 -07001148 int "default tagged command queue depth"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001149 depends on SCSI_ZALON || SCSI_NCR_Q720
1150 default "8"
1151 ---help---
1152 "Tagged command queuing" is a feature of SCSI-2 which improves
1153 performance: the host adapter can send several SCSI commands to a
1154 device's queue even if previous commands haven't finished yet.
1155 Because the device is intelligent, it can optimize its operations
1156 (like head positioning) based on its own request queue. Some SCSI
1157 devices don't implement this properly; if you want to disable this
1158 feature, enter 0 or 1 here (it doesn't matter which).
1159
1160 The default value is 8 and should be supported by most hard disks.
1161 This value can be overridden from the boot command line using the
1162 'tags' option as follows (example):
1163 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
1164 4, set queue depth to 16 for target 2 and target 3 on controller 0
1165 and set queue depth to 10 for target 0 / lun 2 on controller 1.
1166
1167 The normal answer therefore is to go with the default 8 and to use
1168 a boot command line option for devices that need to use a different
1169 command queue depth.
1170
1171 There is no safe option other than using good SCSI devices.
1172
1173config SCSI_NCR53C8XX_MAX_TAGS
Roman Zippele55a3e82006-06-08 22:12:49 -07001174 int "maximum number of queued commands"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001175 depends on SCSI_ZALON || SCSI_NCR_Q720
1176 default "32"
1177 ---help---
1178 This option allows you to specify the maximum number of commands
1179 that can be queued to any device, when tagged command queuing is
1180 possible. The default value is 32. Minimum is 2, maximum is 64.
1181 Modern hard disks are able to support 64 tags and even more, but
1182 do not seem to be faster when more than 32 tags are being used.
1183
1184 So, the normal answer here is to go with the default value 32 unless
1185 you are using very large hard disks with large cache (>= 1 MB) that
1186 are able to take advantage of more than 32 tagged commands.
1187
1188 There is no safe option and the default answer is recommended.
1189
1190config SCSI_NCR53C8XX_SYNC
Roman Zippele55a3e82006-06-08 22:12:49 -07001191 int "synchronous transfers frequency in MHz"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192 depends on SCSI_ZALON || SCSI_NCR_Q720
1193 default "20"
1194 ---help---
1195 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
1196 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
1197 are respectively the maximum data transfer rates in mega-transfers
1198 per second for each class. For example, a FAST-20 Wide 16 device is
1199 able to transfer data at 20 million 16 bit packets per second for a
1200 total rate of 40 MB/s.
1201
1202 You may specify 0 if you want to only use asynchronous data
1203 transfers. This is the safest and slowest option. Otherwise, specify
1204 a value between 5 and 80, depending on the capability of your SCSI
1205 controller. The higher the number, the faster the data transfer.
1206 Note that 80 should normally be ok since the driver decreases the
1207 value automatically according to the controller's capabilities.
1208
1209 Your answer to this question is ignored for controllers with NVRAM,
1210 since the driver will get this information from the user set-up. It
1211 also can be overridden using a boot setup option, as follows
1212 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
1213 for FAST-20 synchronous data transfer (20 mega-transfers per
1214 second).
1215
1216 The normal answer therefore is not to go with the default but to
1217 select the maximum value 80 allowing the driver to use the maximum
1218 value supported by each controller. If this causes problems with
1219 your SCSI devices, you should come back and decrease the value.
1220
1221 There is no safe option other than using good cabling, right
1222 terminations and SCSI conformant devices.
1223
Linus Torvalds1da177e2005-04-16 15:20:36 -07001224config SCSI_NCR53C8XX_NO_DISCONNECT
Roman Zippele55a3e82006-06-08 22:12:49 -07001225 bool "not allow targets to disconnect"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001226 depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
1227 help
1228 This option is only provided for safety if you suspect some SCSI
1229 device of yours to not support properly the target-disconnect
1230 feature. In that case, you would say Y here. In general however, to
1231 not allow targets to disconnect is not reasonable if there is more
1232 than 1 device on a SCSI bus. The normal answer therefore is N.
1233
Linus Torvalds1da177e2005-04-16 15:20:36 -07001234config SCSI_PAS16
1235 tristate "PAS16 SCSI support"
1236 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001237 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001238 ---help---
1239 This is support for a SCSI host adapter. It is explained in section
1240 3.10 of the SCSI-HOWTO, available from
1241 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1242 of the box, you may have to change some settings in
1243 <file:drivers/scsi/pas16.h>.
1244
1245 To compile this driver as a module, choose M here: the
1246 module will be called pas16.
1247
Linus Torvalds1da177e2005-04-16 15:20:36 -07001248config SCSI_QLOGIC_FAS
1249 tristate "Qlogic FAS SCSI support"
1250 depends on ISA && SCSI
1251 ---help---
1252 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
1253 FastSCSI! cards as well as any other card based on the FASXX chip
1254 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
1255
1256 This driver does NOT support the PCI versions of these cards. The
1257 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
1258 SCSI support"), below.
1259
1260 Information about this driver is contained in
1261 <file:Documentation/scsi/qlogicfas.txt>. You should also read the
1262 SCSI-HOWTO, available from
1263 <http://www.tldp.org/docs.html#howto>.
1264
1265 To compile this driver as a module, choose M here: the
1266 module will be called qlogicfas.
1267
Linus Torvalds1da177e2005-04-16 15:20:36 -07001268config SCSI_QLOGIC_1280
1269 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
1270 depends on PCI && SCSI
1271 help
1272 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
1273
1274 To compile this driver as a module, choose M here: the
1275 module will be called qla1280.
1276
Linus Torvalds1da177e2005-04-16 15:20:36 -07001277config SCSI_QLOGICPTI
1278 tristate "PTI Qlogic, ISP Driver"
1279 depends on SBUS && SCSI
1280 help
1281 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1282 controllers are known under Solaris as qpti and in the openprom as
1283 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
1284 driven by a different driver.
1285
1286 To compile this driver as a module, choose M here: the
1287 module will be called qlogicpti.
1288
1289source "drivers/scsi/qla2xxx/Kconfig"
David Somayajuluafaf5a22006-09-19 10:28:00 -07001290source "drivers/scsi/qla4xxx/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001291
dea31012005-04-17 16:05:31 -05001292config SCSI_LPFC
1293 tristate "Emulex LightPulse Fibre Channel Support"
1294 depends on PCI && SCSI
Randy Dunlap6a387922014-09-16 13:47:41 -07001295 depends on SCSI_FC_ATTRS
James Bottomley6a7252f2013-05-06 09:49:25 -07001296 select CRC_T10DIF
dea31012005-04-17 16:05:31 -05001297 help
1298 This lpfc driver supports the Emulex LightPulse
1299 Family of Fibre Channel PCI host adapters.
1300
James Smart923e4b62008-12-04 22:40:07 -05001301config SCSI_LPFC_DEBUG_FS
1302 bool "Emulex LightPulse Fibre Channel debugfs Support"
1303 depends on SCSI_LPFC && DEBUG_FS
1304 help
Matt LaPlante692105b2009-01-26 11:12:25 +01001305 This makes debugging information from the lpfc driver
James Smart923e4b62008-12-04 22:40:07 -05001306 available via the debugfs filesystem.
1307
Linus Torvalds1da177e2005-04-16 15:20:36 -07001308config SCSI_SIM710
1309 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
1310 depends on (EISA || MCA) && SCSI
1311 select SCSI_SPI_ATTRS
1312 ---help---
Matt LaPlante692105b2009-01-26 11:12:25 +01001313 This driver is for NCR53c710 based SCSI host adapters.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001314
1315 It currently supports Compaq EISA cards and NCR MCA cards
1316
Linus Torvalds1da177e2005-04-16 15:20:36 -07001317config SCSI_SYM53C416
1318 tristate "Symbios 53c416 SCSI support"
1319 depends on ISA && SCSI
1320 ---help---
1321 This is support for the sym53c416 SCSI host adapter, the SCSI
1322 adapter that comes with some HP scanners. This driver requires that
1323 the sym53c416 is configured first using some sort of PnP
1324 configuration program (e.g. isapnp) or by a PnP aware BIOS. If you
1325 are using isapnp then you need to compile this driver as a module
1326 and then load it using insmod after isapnp has run. The parameters
1327 of the configured card(s) should be passed to the driver. The format
1328 is:
1329
1330 insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
1331
1332 To compile this driver as a module, choose M here: the
1333 module will be called sym53c416.
1334
1335config SCSI_DC395x
Kees Cook92f6ed42013-01-16 18:53:52 -08001336 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
1337 depends on PCI && SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001338 ---help---
1339 This driver supports PCI SCSI host adapters based on the ASIC
1340 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
1341
1342 This driver works, but is still in experimental status. So better
1343 have a bootable disk and a backup in case of emergency.
1344
1345 Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
1346
1347 To compile this driver as a module, choose M here: the
1348 module will be called dc395x.
1349
Hannes Reinecke3a7e7be2014-11-24 15:37:25 +01001350config SCSI_AM53C974
1351 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
1352 depends on PCI && SCSI
1353 select SCSI_SPI_ATTRS
1354 ---help---
1355 This driver supports PCI SCSI host adapters based on the Am53C974A
1356 chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
1357 PCscsi/PCnet (Am53/79C974) solutions.
1358 This is a new implementation base on the generic esp_scsi driver.
1359
1360 Documentation can be found in <file:Documentation/scsi/tmscsim.txt>.
1361
1362 Note that this driver does NOT support Tekram DC390W/U/F, which are
1363 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
1364
1365 To compile this driver as a module, choose M here: the
1366 module will be called am53c974.
1367
Linus Torvalds1da177e2005-04-16 15:20:36 -07001368config SCSI_T128
1369 tristate "Trantor T128/T128F/T228 SCSI support"
1370 depends on ISA && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001371 select SCSI_SPI_ATTRS
Geert Uytterhoeven928923c2007-08-22 14:01:36 -07001372 select CHECK_SIGNATURE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001373 ---help---
1374 This is support for a SCSI host adapter. It is explained in section
1375 3.11 of the SCSI-HOWTO, available from
1376 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1377 of the box, you may have to change some settings in
1378 <file:drivers/scsi/t128.h>. Note that Trantor was purchased by
1379 Adaptec, and some former Trantor products are being sold under the
1380 Adaptec name.
1381
1382 To compile this driver as a module, choose M here: the
1383 module will be called t128.
1384
1385config SCSI_U14_34F
1386 tristate "UltraStor 14F/34F support"
Al Viroa5532602005-05-04 05:39:42 +01001387 depends on ISA && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001388 ---help---
1389 This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
1390 The source at <file:drivers/scsi/u14-34f.c> contains some
1391 information about this hardware. If the driver doesn't work out of
1392 the box, you may have to change some settings in
1393 <file: drivers/scsi/u14-34f.c>. Read the SCSI-HOWTO, available from
1394 <http://www.tldp.org/docs.html#howto>. Note that there is also
1395 another driver for the same hardware: "UltraStor SCSI support",
1396 below. You should say Y to both only if you want 24F support as
1397 well.
1398
1399 To compile this driver as a module, choose M here: the
1400 module will be called u14-34f.
1401
1402config SCSI_U14_34F_TAGGED_QUEUE
1403 bool "enable tagged command queueing"
1404 depends on SCSI_U14_34F
1405 help
1406 This is a feature of SCSI-2 which improves performance: the host
1407 adapter can send several SCSI commands to a device's queue even if
1408 previous commands haven't finished yet.
1409 This is equivalent to the "u14-34f=tc:y" boot option.
1410
1411config SCSI_U14_34F_LINKED_COMMANDS
1412 bool "enable elevator sorting"
1413 depends on SCSI_U14_34F
1414 help
1415 This option enables elevator sorting for all probed SCSI disks and
1416 CD-ROMs. It definitely reduces the average seek distance when doing
1417 random seeks, but this does not necessarily result in a noticeable
1418 performance improvement: your mileage may vary...
1419 This is equivalent to the "u14-34f=lc:y" boot option.
1420
1421config SCSI_U14_34F_MAX_TAGS
1422 int "maximum number of queued commands"
1423 depends on SCSI_U14_34F
1424 default "8"
1425 help
1426 This specifies how many SCSI commands can be maximally queued for
1427 each probed SCSI device. You should reduce the default value of 8
1428 only if you have disks with buggy or limited tagged command support.
1429 Minimum is 2 and maximum is 14. This value is also the window size
1430 used by the elevator sorting option above. The effective value used
1431 by the driver for each probed SCSI device is reported at boot time.
1432 This is equivalent to the "u14-34f=mq:8" boot option.
1433
1434config SCSI_ULTRASTOR
1435 tristate "UltraStor SCSI support"
Randy Dunlap7e1ee442016-05-19 10:57:31 -07001436 depends on X86 && ISA && SCSI && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001437 ---help---
1438 This is support for the UltraStor 14F, 24F and 34F SCSI-2 host
1439 adapter family. This driver is explained in section 3.12 of the
1440 SCSI-HOWTO, available from
1441 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
1442 of the box, you may have to change some settings in
1443 <file:drivers/scsi/ultrastor.h>.
1444
1445 Note that there is also another driver for the same hardware:
1446 "UltraStor 14F/34F support", above.
1447
1448 To compile this driver as a module, choose M here: the
1449 module will be called ultrastor.
1450
1451config SCSI_NSP32
1452 tristate "Workbit NinjaSCSI-32Bi/UDE support"
1453 depends on PCI && SCSI && !64BIT
1454 help
1455 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
1456 SCSI host adapter. Please read the SCSI-HOWTO, available from
1457 <http://www.tldp.org/docs.html#howto>.
1458
1459 To compile this driver as a module, choose M here: the
1460 module will be called nsp32.
1461
Ondrej Zary48a31032014-11-24 23:24:41 +01001462config SCSI_WD719X
1463 tristate "Western Digital WD7193/7197/7296 support"
1464 depends on PCI && SCSI
1465 select EEPROM_93CX6
1466 ---help---
1467 This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
1468 SCSI controllers (based on WD33C296A chip).
1469
Linus Torvalds1da177e2005-04-16 15:20:36 -07001470config SCSI_DEBUG
Douglas Gilbert6d6f3802014-11-28 19:14:02 -05001471 tristate "SCSI debugging host and device simulator"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001472 depends on SCSI
Randy Dunlapd0ace3c2009-01-12 10:53:04 -08001473 select CRC_T10DIF
Linus Torvalds1da177e2005-04-16 15:20:36 -07001474 help
Douglas Gilbert6d6f3802014-11-28 19:14:02 -05001475 This pseudo driver simulates one or more hosts (SCSI initiators),
1476 each with one or more targets, each with one or more logical units.
1477 Defaults to one of each, creating a small RAM disk device. Many
1478 parameters found in the /sys/bus/pseudo/drivers/scsi_debug
1479 directory can be tweaked at run time.
1480 See <http://sg.danny.cz/sg/sdebug26.html> for more information.
1481 Mainly used for testing and best as a module. If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001482
1483config SCSI_MESH
1484 tristate "MESH (Power Mac internal SCSI) support"
1485 depends on PPC32 && PPC_PMAC && SCSI
1486 help
1487 Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
1488 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
1489 other Power Macintoshes do). Say Y to include support for this SCSI
1490 adaptor.
1491
1492 To compile this driver as a module, choose M here: the
1493 module will be called mesh.
1494
1495config SCSI_MESH_SYNC_RATE
1496 int "maximum synchronous transfer rate (MB/s) (0 = async)"
1497 depends on SCSI_MESH
1498 default "5"
1499 help
1500 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
1501 drives a bus which is entirely internal to the machine (such as the
1502 7500, 7600, 8500, etc.), the MESH is capable of synchronous
1503 operation at up to 10 MB/s. On machines where the SCSI bus
1504 controlled by the MESH can have external devices connected, it is
1505 usually rated at 5 MB/s. 5 is a safe value here unless you know the
1506 MESH SCSI bus is internal only; in that case you can say 10. Say 0
1507 to disable synchronous operation.
1508
1509config SCSI_MESH_RESET_DELAY_MS
1510 int "initial bus reset delay (ms) (0 = no reset)"
1511 depends on SCSI_MESH
1512 default "4000"
1513
1514config SCSI_MAC53C94
1515 tristate "53C94 (Power Mac external SCSI) support"
1516 depends on PPC32 && PPC_PMAC && SCSI
1517 help
1518 On Power Macintoshes (and clones) with two SCSI buses, the external
1519 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
1520 machines which only have one SCSI bus, such as the 7200, also use
1521 the 53C94. Say Y to include support for the 53C94.
1522
1523 To compile this driver as a module, choose M here: the
1524 module will be called mac53c94.
1525
1526source "drivers/scsi/arm/Kconfig"
1527
1528config JAZZ_ESP
1529 bool "MIPS JAZZ FAS216 SCSI support"
1530 depends on MACH_JAZZ && SCSI
David S. Miller3a243072007-06-03 17:56:04 -07001531 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001532 help
1533 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1534 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
1535 systems.
1536
1537config A3000_SCSI
1538 tristate "A3000 WD33C93A support"
1539 depends on AMIGA && SCSI
1540 help
1541 If you have an Amiga 3000 and have SCSI devices connected to the
1542 built-in SCSI controller, say Y. Otherwise, say N.
1543
1544 To compile this driver as a module, choose M here: the
Geert Uytterhoeven90638f92007-08-22 14:01:34 -07001545 module will be called a3000.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001546
1547config A2091_SCSI
1548 tristate "A2091/A590 WD33C93A support"
1549 depends on ZORRO && SCSI
1550 help
1551 If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
1552 say N.
1553
1554 To compile this driver as a module, choose M here: the
Geert Uytterhoeven90638f92007-08-22 14:01:34 -07001555 module will be called a2091.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001556
1557config GVP11_SCSI
1558 tristate "GVP Series II WD33C93A support"
1559 depends on ZORRO && SCSI
1560 ---help---
1561 If you have a Great Valley Products Series II SCSI controller,
1562 answer Y. Also say Y if you have a later model of GVP SCSI
1563 controller (such as the GVP A4008 or a Combo board). Otherwise,
1564 answer N. This driver does NOT work for the T-Rex series of
1565 accelerators from TekMagic and GVP-M.
1566
1567 To compile this driver as a module, choose M here: the
1568 module will be called gvp11.
1569
Kars de Jonga16efc12007-06-17 14:47:08 +02001570config SCSI_A4000T
Kees Cook92f6ed42013-01-16 18:53:52 -08001571 tristate "A4000T NCR53c710 SCSI support"
1572 depends on AMIGA && SCSI
Kars de Jonga16efc12007-06-17 14:47:08 +02001573 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001574 help
Kars de Jonga16efc12007-06-17 14:47:08 +02001575 If you have an Amiga 4000T and have SCSI devices connected to the
1576 built-in SCSI controller, say Y. Otherwise, say N.
1577
1578 To compile this driver as a module, choose M here: the
1579 module will be called a4000t.
1580
Kars de Jong45804fb2007-06-17 14:47:09 +02001581config SCSI_ZORRO7XX
Kees Cook92f6ed42013-01-16 18:53:52 -08001582 tristate "Zorro NCR53c710 SCSI support"
1583 depends on ZORRO && SCSI
Kars de Jong45804fb2007-06-17 14:47:09 +02001584 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001585 help
Kars de Jong45804fb2007-06-17 14:47:09 +02001586 Support for various NCR53c710-based SCSI controllers on Zorro
1587 expansion boards for the Amiga.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001588 This includes:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001589 - the Amiga 4091 Zorro III SCSI-2 controller,
1590 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
1591 (info at
1592 <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>),
1593 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
1594 accelerator card for the Amiga 1200,
1595 - the SCSI controller on the GVP Turbo 040/060 accelerator.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001596
Linus Torvalds1da177e2005-04-16 15:20:36 -07001597config ATARI_SCSI
1598 tristate "Atari native SCSI support"
Michael Schmitzfb810d12007-05-01 22:32:35 +02001599 depends on ATARI && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001600 select SCSI_SPI_ATTRS
Geert Uytterhoevenfff11c02008-10-13 21:59:02 +02001601 select NVRAM
Linus Torvalds1da177e2005-04-16 15:20:36 -07001602 ---help---
1603 If you have an Atari with built-in NCR5380 SCSI controller (TT,
1604 Falcon, ...) say Y to get it supported. Of course also, if you have
1605 a compatible SCSI controller (e.g. for Medusa).
1606
1607 To compile this driver as a module, choose M here: the
1608 module will be called atari_scsi.
1609
1610 This driver supports both styles of NCR integration into the
1611 system: the TT style (separate DMA), and the Falcon style (via
1612 ST-DMA, replacing ACSI). It does NOT support other schemes, like
1613 in the Hades (without DMA).
1614
Linus Torvalds1da177e2005-04-16 15:20:36 -07001615config MAC_SCSI
Finn Thain6e9ae6d2014-11-12 16:12:05 +11001616 tristate "Macintosh NCR5380 SCSI"
Al Virofa53bb62005-08-23 22:48:07 +01001617 depends on MAC && SCSI=y
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001618 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001619 help
1620 This is the NCR 5380 SCSI controller included on most of the 68030
1621 based Macintoshes. If you have one of these say Y and read the
1622 SCSI-HOWTO, available from
1623 <http://www.tldp.org/docs.html#howto>.
1624
Finn Thain6fe07aa2008-04-25 10:06:05 -05001625config SCSI_MAC_ESP
1626 tristate "Macintosh NCR53c9[46] SCSI"
1627 depends on MAC && SCSI
Geert Uytterhoeven48fc8de2008-05-05 21:27:21 +02001628 select SCSI_SPI_ATTRS
Finn Thain6fe07aa2008-04-25 10:06:05 -05001629 help
1630 This is the NCR 53c9x SCSI controller found on most of the 68040
1631 based Macintoshes.
1632
1633 To compile this driver as a module, choose M here: the module
1634 will be called mac_esp.
1635
Linus Torvalds1da177e2005-04-16 15:20:36 -07001636config MVME147_SCSI
1637 bool "WD33C93 SCSI driver for MVME147"
Al Virofa53bb62005-08-23 22:48:07 +01001638 depends on MVME147 && SCSI=y
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001639 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001640 help
1641 Support for the on-board SCSI controller on the Motorola MVME147
1642 single-board computer.
1643
1644config MVME16x_SCSI
Kars de Jong506c7bb2007-06-17 14:47:07 +02001645 tristate "NCR53C710 SCSI driver for MVME16x"
1646 depends on MVME16x && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001647 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001648 help
1649 The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
1650 SCSI controller chip. Almost everyone using one of these boards
1651 will want to say Y to this question.
1652
1653config BVME6000_SCSI
Kars de Jong8276b582007-06-17 14:47:06 +02001654 tristate "NCR53C710 SCSI driver for BVME6000"
1655 depends on BVME6000 && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001656 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001657 help
1658 The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
1659 SCSI controller chip. Almost everyone using one of these boards
1660 will want to say Y to this question.
1661
Linus Torvalds1da177e2005-04-16 15:20:36 -07001662config SUN3_SCSI
1663 tristate "Sun3 NCR5380 SCSI"
Sam Creaseyc39e7ee2006-12-09 10:37:05 +01001664 depends on SUN3 && SCSI
Matthew Wilcox410ca5c2005-12-15 16:22:01 -05001665 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001666 help
1667 This option will enable support for the OBIO (onboard io) NCR5380
1668 SCSI controller found in the Sun 3/50 and 3/60, as well as for
1669 "Sun3" type VME scsi controllers also based on the NCR5380.
1670 General Linux information on the Sun 3 series (now discontinued)
1671 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
1672
1673config SUN3X_ESP
1674 bool "Sun3x ESP SCSI"
Al Virofa53bb62005-08-23 22:48:07 +01001675 depends on SUN3X && SCSI=y
Thomas Bogendoerfer0bb67f12008-02-01 00:13:34 +01001676 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001677 help
1678 The ESP was an on-board SCSI controller used on Sun 3/80
1679 machines. Say Y here to compile in support for it.
1680
1681config SCSI_SUNESP
1682 tristate "Sparc ESP Scsi Driver"
1683 depends on SBUS && SCSI
David S. Miller3a243072007-06-03 17:56:04 -07001684 select SCSI_SPI_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001685 help
1686 This is the driver for the Sun ESP SCSI host adapter. The ESP
Frans Popdbfe54a2008-06-19 20:20:12 -07001687 chipset is present in most SPARC SBUS-based computers and
1688 supports the Emulex family of ESP SCSI chips (esp100, esp100A,
1689 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001690
1691 To compile this driver as a module, choose M here: the
Frans Popdbfe54a2008-06-19 20:20:12 -07001692 module will be called sun_esp.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001693
Linus Torvalds1da177e2005-04-16 15:20:36 -07001694config ZFCP
1695 tristate "FCP host bus adapter driver for IBM eServer zSeries"
Martin Schwidefsky347a8dc2006-01-06 00:19:28 -08001696 depends on S390 && QDIO && SCSI
Randy Dunlap6a387922014-09-16 13:47:41 -07001697 depends on SCSI_FC_ATTRS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001698 help
1699 If you want to access SCSI devices attached to your IBM eServer
1700 zSeries by means of Fibre Channel interfaces say Y.
1701 For details please refer to the documentation provided by IBM at
1702 <http://oss.software.ibm.com/developerworks/opensource/linux390>
1703
1704 This driver is also available as a module. This module will be
1705 called zfcp. If you want to compile it as a module, say M here
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001706 and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001707
Anil Ravindranath89a36812009-08-25 17:35:18 -07001708config SCSI_PMCRAID
1709 tristate "PMC SIERRA Linux MaxRAID adapter support"
Randy Dunlapb2045242010-08-10 18:01:24 -07001710 depends on PCI && SCSI && NET
Anil Ravindranath89a36812009-08-25 17:35:18 -07001711 ---help---
1712 This driver supports the PMC SIERRA MaxRAID adapters.
1713
jack wangdbf9bfe2009-10-14 16:19:21 +08001714config SCSI_PM8001
1715 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
1716 depends on PCI && SCSI
1717 select SCSI_SAS_LIBSAS
1718 help
1719 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
1720 based host adapters.
1721
Jing Huang7725ccf2009-09-23 17:46:15 -07001722config SCSI_BFA_FC
1723 tristate "Brocade BFA Fibre Channel Support"
1724 depends on PCI && SCSI
Randy Dunlap6a387922014-09-16 13:47:41 -07001725 depends on SCSI_FC_ATTRS
Jing Huang7725ccf2009-09-23 17:46:15 -07001726 help
1727 This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
1728
1729 To compile this driver as a module, choose M here. The module will
1730 be called bfa.
1731
Paolo Bonzini4fe74b12012-02-05 12:16:00 +01001732config SCSI_VIRTIO
Kees Cook92f6ed42013-01-16 18:53:52 -08001733 tristate "virtio-scsi support"
1734 depends on VIRTIO
Paolo Bonzini4fe74b12012-02-05 12:16:00 +01001735 help
1736 This is the virtual HBA driver for virtio. If the kernel will
1737 be used in a virtual machine, say Y or M.
1738
Naresh Kumar Innaa3667aa2012-11-15 22:41:18 +05301739source "drivers/scsi/csiostor/Kconfig"
Paolo Bonzini4fe74b12012-02-05 12:16:00 +01001740
Jan Engelhardtfc6e7402007-07-09 12:00:08 -07001741endif # SCSI_LOWLEVEL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001742
1743source "drivers/scsi/pcmcia/Kconfig"
1744
Chandra Seetharamana6a8d9f2008-05-01 14:49:46 -07001745source "drivers/scsi/device_handler/Kconfig"
1746
Boaz Harrosh68274792009-01-25 17:24:14 +02001747source "drivers/scsi/osd/Kconfig"
1748
Linus Torvalds1da177e2005-04-16 15:20:36 -07001749endmenu