blob: 0e008dacf679c0df060c9af4c50efb7272a2e2ea [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/******************************************************************************
2** Device driver for the PCI-SCSI NCR538XX controller family.
3**
4** Copyright (C) 1994 Wolfgang Stanglmeier
Matthew Wilcox19c65092005-12-16 12:50:53 -05005** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
Linus Torvalds1da177e2005-04-16 15:20:36 -07006**
7** This program is free software; you can redistribute it and/or modify
8** it under the terms of the GNU General Public License as published by
9** the Free Software Foundation; either version 2 of the License, or
10** (at your option) any later version.
11**
12** This program is distributed in the hope that it will be useful,
13** but WITHOUT ANY WARRANTY; without even the implied warranty of
14** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15** GNU General Public License for more details.
16**
17** You should have received a copy of the GNU General Public License
18** along with this program; if not, write to the Free Software
19** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20**
21**-----------------------------------------------------------------------------
22**
23** This driver has been ported to Linux from the FreeBSD NCR53C8XX driver
24** and is currently maintained by
25**
26** Gerard Roudier <groudier@free.fr>
27**
28** Being given that this driver originates from the FreeBSD version, and
29** in order to keep synergy on both, any suggested enhancements and corrections
30** received on Linux are automatically a potential candidate for the FreeBSD
31** version.
32**
33** The original driver has been written for 386bsd and FreeBSD by
34** Wolfgang Stanglmeier <wolf@cologne.de>
35** Stefan Esser <se@mi.Uni-Koeln.de>
36**
37** And has been ported to NetBSD by
38** Charles M. Hannum <mycroft@gnu.ai.mit.edu>
39**
Matthew Wilcox19c65092005-12-16 12:50:53 -050040** NVRAM detection and reading.
41** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
42**
43** Added support for MIPS big endian systems.
44** Carsten Langgaard, carstenl@mips.com
45** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
46**
47** Added support for HP PARISC big endian systems.
48** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
49**
Linus Torvalds1da177e2005-04-16 15:20:36 -070050*******************************************************************************
51*/
52
53#ifndef NCR53C8XX_H
54#define NCR53C8XX_H
55
56#include <scsi/scsi_host.h>
57
Matthew Wilcoxb0dc1db2006-02-17 13:18:41 -070058
Matthew Wilcox19c65092005-12-16 12:50:53 -050059/*
Matthew Wilcoxb0dc1db2006-02-17 13:18:41 -070060** If you want a driver as small as possible, donnot define the
Matthew Wilcox19c65092005-12-16 12:50:53 -050061** following options.
62*/
63#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
64#define SCSI_NCR_DEBUG_INFO_SUPPORT
65
66/*
67** To disable integrity checking, do not define the
68** following option.
69*/
70#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
71# define SCSI_NCR_ENABLE_INTEGRITY_CHECK
72#endif
73
74/* ---------------------------------------------------------------------
75** Take into account kernel configured parameters.
76** Most of these options can be overridden at startup by a command line.
77** ---------------------------------------------------------------------
78*/
79
80/*
81 * For Ultra2 and Ultra3 SCSI support option, use special features.
82 *
83 * Value (default) means:
84 * bit 0 : all features enabled, except:
85 * bit 1 : PCI Write And Invalidate.
86 * bit 2 : Data Phase Mismatch handling from SCRIPTS.
87 *
88 * Use boot options ncr53c8xx=specf:1 if you want all chip features to be
89 * enabled by the driver.
90 */
91#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
92
93#define SCSI_NCR_MAX_SYNC (80)
94
95/*
96 * Allow tags from 2 to 256, default 8
97 */
98#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
99#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
100#define SCSI_NCR_MAX_TAGS (2)
101#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
102#define SCSI_NCR_MAX_TAGS (256)
103#else
104#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
105#endif
106#else
107#define SCSI_NCR_MAX_TAGS (8)
108#endif
109
110/*
111 * Allow tagged command queuing support if configured with default number
112 * of tags set to max (see above).
113 */
114#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
115#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
116#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
117#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
118#else
119#define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
120#endif
121
122/*
123 * Immediate arbitration
124 */
125#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
126#define SCSI_NCR_IARB_SUPPORT
127#endif
128
129/*
130 * Sync transfer frequency at startup.
131 * Allow from 5Mhz to 80Mhz default 20 Mhz.
132 */
133#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
134#define CONFIG_SCSI_NCR53C8XX_SYNC (20)
135#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
136#undef CONFIG_SCSI_NCR53C8XX_SYNC
137#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
138#endif
139
140#if CONFIG_SCSI_NCR53C8XX_SYNC == 0
141#define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
142#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
143#define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
144#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
145#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
146#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
147#define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
148#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
149#define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
150#else
151#define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
152#endif
153
154/*
155 * Disallow disconnections at boot-up
156 */
157#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
158#define SCSI_NCR_SETUP_DISCONNECTION (0)
159#else
160#define SCSI_NCR_SETUP_DISCONNECTION (1)
161#endif
162
163/*
164 * Force synchronous negotiation for all targets
165 */
166#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
167#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
168#else
169#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
170#endif
171
172/*
173 * Disable master parity checking (flawed hardwares need that)
174 */
175#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
176#define SCSI_NCR_SETUP_MASTER_PARITY (0)
177#else
178#define SCSI_NCR_SETUP_MASTER_PARITY (1)
179#endif
180
181/*
182 * Disable scsi parity checking (flawed devices may need that)
183 */
184#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
185#define SCSI_NCR_SETUP_SCSI_PARITY (0)
186#else
187#define SCSI_NCR_SETUP_SCSI_PARITY (1)
188#endif
189
190/*
191 * Settle time after reset at boot-up
192 */
193#define SCSI_NCR_SETUP_SETTLE_TIME (2)
194
195/*
196** Bridge quirks work-around option defaulted to 1.
197*/
198#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
199#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
200#endif
201
202/*
203** Work-around common bridge misbehaviour.
204**
205** - Do not flush posted writes in the opposite
206** direction on read.
207** - May reorder DMA writes to memory.
208**
209** This option should not affect performances
210** significantly, so it is the default.
211*/
212#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
213#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
214#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
215#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
216
217/*
218** Same as option 1, but also deal with
219** misconfigured interrupts.
220**
Matt LaPlante0779bf22006-11-30 05:24:39 +0100221** - Edge triggered instead of level sensitive.
Matthew Wilcox19c65092005-12-16 12:50:53 -0500222** - No interrupt line connected.
223** - IRQ number misconfigured.
224**
225** If no interrupt is delivered, the driver will
226** catch the interrupt conditions 10 times per
227** second. No need to say that this option is
228** not recommended.
229*/
230#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
231#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
232#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
233#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
234#define SCSI_NCR_PCIQ_BROKEN_INTR
235
236/*
237** Some bridge designers decided to flush
238** everything prior to deliver the interrupt.
239** This option tries to deal with such a
240** behaviour.
241*/
242#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
243#define SCSI_NCR_PCIQ_SYNC_ON_INTR
244#endif
245
246/*
247** Other parameters not configurable with "make config"
248** Avoid to change these constants, unless you know what you are doing.
249*/
250
251#define SCSI_NCR_ALWAYS_SIMPLE_TAG
252#define SCSI_NCR_MAX_SCATTER (127)
253#define SCSI_NCR_MAX_TARGET (16)
254
255/*
256** Compute some desirable value for CAN_QUEUE
257** and CMD_PER_LUN.
258** The driver will use lower values if these
259** ones appear to be too large.
260*/
261#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
262#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
263
264#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
265#define SCSI_NCR_TIMER_INTERVAL (HZ)
266
267#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
268#define SCSI_NCR_MAX_LUN (16)
269#else
270#define SCSI_NCR_MAX_LUN (1)
271#endif
272
273/*
274 * IO functions definition for big/little endian CPU support.
275 * For now, the NCR is only supported in little endian addressing mode,
276 */
277
278#ifdef __BIG_ENDIAN
279
280#define inw_l2b inw
281#define inl_l2b inl
282#define outw_b2l outw
283#define outl_b2l outl
284
285#define readb_raw readb
286#define writeb_raw writeb
287
288#if defined(SCSI_NCR_BIG_ENDIAN)
289#define readw_l2b __raw_readw
290#define readl_l2b __raw_readl
291#define writew_b2l __raw_writew
292#define writel_b2l __raw_writel
293#define readw_raw __raw_readw
294#define readl_raw __raw_readl
295#define writew_raw __raw_writew
296#define writel_raw __raw_writel
297#else /* Other big-endian */
298#define readw_l2b readw
299#define readl_l2b readl
300#define writew_b2l writew
301#define writel_b2l writel
302#define readw_raw readw
303#define readl_raw readl
304#define writew_raw writew
305#define writel_raw writel
306#endif
307
308#else /* little endian */
309
310#define inw_raw inw
311#define inl_raw inl
312#define outw_raw outw
313#define outl_raw outl
314
315#define readb_raw readb
316#define readw_raw readw
317#define readl_raw readl
318#define writeb_raw writeb
319#define writew_raw writew
320#define writel_raw writel
321
322#endif
323
324#if !defined(__hppa__) && !defined(__mips__)
325#ifdef SCSI_NCR_BIG_ENDIAN
326#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
327#endif
328#endif
329
330#define MEMORY_BARRIER() mb()
331
332
333/*
334 * If the NCR uses big endian addressing mode over the
335 * PCI, actual io register addresses for byte and word
336 * accesses must be changed according to lane routing.
337 * Btw, ncr_offb() and ncr_offw() macros only apply to
338 * constants and so donnot generate bloated code.
339 */
340
341#if defined(SCSI_NCR_BIG_ENDIAN)
342
343#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
344#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
345
346#else
347
348#define ncr_offb(o) (o)
349#define ncr_offw(o) (o)
350
351#endif
352
353/*
354 * If the CPU and the NCR use same endian-ness addressing,
355 * no byte reordering is needed for script patching.
356 * Macro cpu_to_scr() is to be used for script patching.
357 * Macro scr_to_cpu() is to be used for getting a DWORD
358 * from the script.
359 */
360
361#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
362
363#define cpu_to_scr(dw) cpu_to_le32(dw)
364#define scr_to_cpu(dw) le32_to_cpu(dw)
365
366#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
367
368#define cpu_to_scr(dw) cpu_to_be32(dw)
369#define scr_to_cpu(dw) be32_to_cpu(dw)
370
371#else
372
373#define cpu_to_scr(dw) (dw)
374#define scr_to_cpu(dw) (dw)
375
376#endif
377
378/*
379 * Access to the controller chip.
380 *
381 * If the CPU and the NCR use same endian-ness addressing,
382 * no byte reordering is needed for accessing chip io
383 * registers. Functions suffixed by '_raw' are assumed
384 * to access the chip over the PCI without doing byte
385 * reordering. Functions suffixed by '_l2b' are
386 * assumed to perform little-endian to big-endian byte
387 * reordering, those suffixed by '_b2l' blah, blah,
388 * blah, ...
389 */
390
391/*
392 * MEMORY mapped IO input / output
393 */
394
395#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
396#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
397
398#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
399
400#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
401#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
402
403#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
404#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
405
406#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
407
408#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
409#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
410
411#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
412#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
413
414#else
415
416#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
417/* Only 8 or 32 bit transfers allowed */
418#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
419#else
420#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
421#endif
422#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
423
424#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
425/* Only 8 or 32 bit transfers allowed */
426#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
427#else
428#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
429#endif
430#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
431
432#endif
433
434#define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
435#define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
436#define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
437
438#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
439#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
440#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
441
442/*
443 * Set bit field ON, OFF
444 */
445
446#define OUTONB(r, m) OUTB(r, INB(r) | (m))
447#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
448#define OUTONW(r, m) OUTW(r, INW(r) | (m))
449#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
450#define OUTONL(r, m) OUTL(r, INL(r) | (m))
451#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
452
453/*
454 * We normally want the chip to have a consistent view
455 * of driver internal data structures when we restart it.
456 * Thus these macros.
457 */
458#define OUTL_DSP(v) \
459 do { \
460 MEMORY_BARRIER(); \
461 OUTL (nc_dsp, (v)); \
462 } while (0)
463
464#define OUTONB_STD() \
465 do { \
466 MEMORY_BARRIER(); \
467 OUTONB (nc_dcntl, (STD|NOCOM)); \
468 } while (0)
469
470
471/*
472** NCR53C8XX devices features table.
473*/
474struct ncr_chip {
475 unsigned short revision_id;
476 unsigned char burst_max; /* log-base-2 of max burst */
477 unsigned char offset_max;
478 unsigned char nr_divisor;
479 unsigned int features;
480#define FE_LED0 (1<<0)
481#define FE_WIDE (1<<1) /* Wide data transfers */
482#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
483#define FE_DBLR (1<<4) /* Clock doubler present */
484#define FE_QUAD (1<<5) /* Clock quadrupler present */
485#define FE_ERL (1<<6) /* Enable read line */
486#define FE_CLSE (1<<7) /* Cache line size enable */
487#define FE_WRIE (1<<8) /* Write & Invalidate enable */
488#define FE_ERMP (1<<9) /* Enable read multiple */
489#define FE_BOF (1<<10) /* Burst opcode fetch */
490#define FE_DFS (1<<11) /* DMA fifo size */
491#define FE_PFEN (1<<12) /* Prefetch enable */
492#define FE_LDSTR (1<<13) /* Load/Store supported */
493#define FE_RAM (1<<14) /* On chip RAM present */
494#define FE_VARCLK (1<<15) /* SCSI clock may vary */
495#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
496#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
497#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
498#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
499#define FE_LEDC (1<<20) /* Hardware control of LED */
500#define FE_DIFF (1<<21) /* Support Differential SCSI */
501#define FE_66MHZ (1<<23) /* 66MHz PCI Support */
502#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
503#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
504#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
505#define FE_EHP (1<<27) /* 720: Even host parity */
506#define FE_MUX (1<<28) /* 720: Multiplexed bus */
507#define FE_EA (1<<29) /* 720: Enable Ack */
508
509#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
510#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
511#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
512};
513
514
515/*
516** Driver setup structure.
517**
518** This structure is initialized from linux config options.
519** It can be overridden at boot-up by the boot command line.
520*/
521#define SCSI_NCR_MAX_EXCLUDES 8
522struct ncr_driver_setup {
523 u8 master_parity;
524 u8 scsi_parity;
525 u8 disconnection;
526 u8 special_features;
527 u8 force_sync_nego;
528 u8 reverse_probe;
529 u8 pci_fix_up;
530 u8 use_nvram;
531 u8 verbose;
532 u8 default_tags;
533 u16 default_sync;
534 u16 debug;
535 u8 burst_max;
536 u8 led_pin;
537 u8 max_wide;
538 u8 settle_delay;
539 u8 diff_support;
540 u8 irqm;
541 u8 bus_check;
542 u8 optimize;
543 u8 recovery;
544 u8 host_id;
545 u16 iarb;
546 u32 excludes[SCSI_NCR_MAX_EXCLUDES];
547 char tag_ctrl[100];
548};
549
550/*
551** Initial setup.
Matt LaPlante0779bf22006-11-30 05:24:39 +0100552** Can be overridden at startup by a command line.
Matthew Wilcox19c65092005-12-16 12:50:53 -0500553*/
554#define SCSI_NCR_DRIVER_SETUP \
555{ \
556 SCSI_NCR_SETUP_MASTER_PARITY, \
557 SCSI_NCR_SETUP_SCSI_PARITY, \
558 SCSI_NCR_SETUP_DISCONNECTION, \
559 SCSI_NCR_SETUP_SPECIAL_FEATURES, \
560 SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
561 0, \
562 0, \
563 1, \
564 0, \
565 SCSI_NCR_SETUP_DEFAULT_TAGS, \
566 SCSI_NCR_SETUP_DEFAULT_SYNC, \
567 0x00, \
568 7, \
569 0, \
570 1, \
571 SCSI_NCR_SETUP_SETTLE_TIME, \
572 0, \
573 0, \
574 1, \
575 0, \
576 0, \
577 255, \
578 0x00 \
579}
580
581/*
582** Boot fail safe setup.
583** Override initial setup from boot command line:
584** ncr53c8xx=safe:y
585*/
586#define SCSI_NCR_DRIVER_SAFE_SETUP \
587{ \
588 0, \
589 1, \
590 0, \
591 0, \
592 0, \
593 0, \
594 0, \
595 1, \
596 2, \
597 0, \
598 255, \
599 0x00, \
600 255, \
601 0, \
602 0, \
603 10, \
604 1, \
605 1, \
606 1, \
607 0, \
608 0, \
609 255 \
610}
611
612/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
613
614/*-----------------------------------------------------------------
615**
616** The ncr 53c810 register structure.
617**
618**-----------------------------------------------------------------
619*/
620
621struct ncr_reg {
622/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
623
624/*01*/ u8 nc_scntl1; /* no reset */
625 #define ISCON 0x10 /* connected to scsi */
626 #define CRST 0x08 /* force reset */
627 #define IARB 0x02 /* immediate arbitration */
628
629/*02*/ u8 nc_scntl2; /* no disconnect expected */
630 #define SDU 0x80 /* cmd: disconnect will raise error */
631 #define CHM 0x40 /* sta: chained mode */
632 #define WSS 0x08 /* sta: wide scsi send [W]*/
633 #define WSR 0x01 /* sta: wide scsi received [W]*/
634
635/*03*/ u8 nc_scntl3; /* cnf system clock dependent */
636 #define EWS 0x08 /* cmd: enable wide scsi [W]*/
637 #define ULTRA 0x80 /* cmd: ULTRA enable */
638 /* bits 0-2, 7 rsvd for C1010 */
639
640/*04*/ u8 nc_scid; /* cnf host adapter scsi address */
641 #define RRE 0x40 /* r/w:e enable response to resel. */
642 #define SRE 0x20 /* r/w:e enable response to select */
643
644/*05*/ u8 nc_sxfer; /* ### Sync speed and count */
645 /* bits 6-7 rsvd for C1010 */
646
647/*06*/ u8 nc_sdid; /* ### Destination-ID */
648
649/*07*/ u8 nc_gpreg; /* ??? IO-Pins */
650
651/*08*/ u8 nc_sfbr; /* ### First byte in phase */
652
653/*09*/ u8 nc_socl;
654 #define CREQ 0x80 /* r/w: SCSI-REQ */
655 #define CACK 0x40 /* r/w: SCSI-ACK */
656 #define CBSY 0x20 /* r/w: SCSI-BSY */
657 #define CSEL 0x10 /* r/w: SCSI-SEL */
658 #define CATN 0x08 /* r/w: SCSI-ATN */
659 #define CMSG 0x04 /* r/w: SCSI-MSG */
660 #define CC_D 0x02 /* r/w: SCSI-C_D */
661 #define CI_O 0x01 /* r/w: SCSI-I_O */
662
663/*0a*/ u8 nc_ssid;
664
665/*0b*/ u8 nc_sbcl;
666
667/*0c*/ u8 nc_dstat;
668 #define DFE 0x80 /* sta: dma fifo empty */
669 #define MDPE 0x40 /* int: master data parity error */
670 #define BF 0x20 /* int: script: bus fault */
671 #define ABRT 0x10 /* int: script: command aborted */
672 #define SSI 0x08 /* int: script: single step */
673 #define SIR 0x04 /* int: script: interrupt instruct. */
674 #define IID 0x01 /* int: script: illegal instruct. */
675
676/*0d*/ u8 nc_sstat0;
677 #define ILF 0x80 /* sta: data in SIDL register lsb */
678 #define ORF 0x40 /* sta: data in SODR register lsb */
679 #define OLF 0x20 /* sta: data in SODL register lsb */
680 #define AIP 0x10 /* sta: arbitration in progress */
681 #define LOA 0x08 /* sta: arbitration lost */
682 #define WOA 0x04 /* sta: arbitration won */
683 #define IRST 0x02 /* sta: scsi reset signal */
684 #define SDP 0x01 /* sta: scsi parity signal */
685
686/*0e*/ u8 nc_sstat1;
687 #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
688
689/*0f*/ u8 nc_sstat2;
690 #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
691 #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
692 #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
693 #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
694 #define LDSC 0x02 /* sta: disconnect & reconnect */
695
696/*10*/ u8 nc_dsa; /* --> Base page */
697/*11*/ u8 nc_dsa1;
698/*12*/ u8 nc_dsa2;
699/*13*/ u8 nc_dsa3;
700
701/*14*/ u8 nc_istat; /* --> Main Command and status */
702 #define CABRT 0x80 /* cmd: abort current operation */
703 #define SRST 0x40 /* mod: reset chip */
704 #define SIGP 0x20 /* r/w: message from host to ncr */
705 #define SEM 0x10 /* r/w: message between host + ncr */
706 #define CON 0x08 /* sta: connected to scsi */
707 #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
708 #define SIP 0x02 /* sta: scsi-interrupt */
709 #define DIP 0x01 /* sta: host/script interrupt */
710
711/*15*/ u8 nc_istat1; /* 896 and later cores only */
712 #define FLSH 0x04 /* sta: chip is flushing */
713 #define SRUN 0x02 /* sta: scripts are running */
714 #define SIRQD 0x01 /* r/w: disable INT pin */
715
716/*16*/ u8 nc_mbox0; /* 896 and later cores only */
717/*17*/ u8 nc_mbox1; /* 896 and later cores only */
718
719/*18*/ u8 nc_ctest0;
720 #define EHP 0x04 /* 720 even host parity */
721/*19*/ u8 nc_ctest1;
722
723/*1a*/ u8 nc_ctest2;
724 #define CSIGP 0x40
725 /* bits 0-2,7 rsvd for C1010 */
726
727/*1b*/ u8 nc_ctest3;
728 #define FLF 0x08 /* cmd: flush dma fifo */
729 #define CLF 0x04 /* cmd: clear dma fifo */
730 #define FM 0x02 /* mod: fetch pin mode */
731 #define WRIE 0x01 /* mod: write and invalidate enable */
732 /* bits 4-7 rsvd for C1010 */
733
734/*1c*/ u32 nc_temp; /* ### Temporary stack */
735
736/*20*/ u8 nc_dfifo;
737/*21*/ u8 nc_ctest4;
738 #define MUX 0x80 /* 720 host bus multiplex mode */
739 #define BDIS 0x80 /* mod: burst disable */
740 #define MPEE 0x08 /* mod: master parity error enable */
741
742/*22*/ u8 nc_ctest5;
743 #define DFS 0x20 /* mod: dma fifo size */
744 /* bits 0-1, 3-7 rsvd for C1010 */
745/*23*/ u8 nc_ctest6;
746
747/*24*/ u32 nc_dbc; /* ### Byte count and command */
748/*28*/ u32 nc_dnad; /* ### Next command register */
749/*2c*/ u32 nc_dsp; /* --> Script Pointer */
750/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
751
752/*34*/ u8 nc_scratcha; /* Temporary register a */
753/*35*/ u8 nc_scratcha1;
754/*36*/ u8 nc_scratcha2;
755/*37*/ u8 nc_scratcha3;
756
757/*38*/ u8 nc_dmode;
758 #define BL_2 0x80 /* mod: burst length shift value +2 */
759 #define BL_1 0x40 /* mod: burst length shift value +1 */
760 #define ERL 0x08 /* mod: enable read line */
761 #define ERMP 0x04 /* mod: enable read multiple */
762 #define BOF 0x02 /* mod: burst op code fetch */
763
764/*39*/ u8 nc_dien;
765/*3a*/ u8 nc_sbr;
766
767/*3b*/ u8 nc_dcntl; /* --> Script execution control */
768 #define CLSE 0x80 /* mod: cache line size enable */
769 #define PFF 0x40 /* cmd: pre-fetch flush */
770 #define PFEN 0x20 /* mod: pre-fetch enable */
771 #define EA 0x20 /* mod: 720 enable-ack */
772 #define SSM 0x10 /* mod: single step mode */
773 #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
774 #define STD 0x04 /* cmd: start dma mode */
775 #define IRQD 0x02 /* mod: irq disable */
776 #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
777 /* bits 0-1 rsvd for C1010 */
778
779/*3c*/ u32 nc_adder;
780
781/*40*/ u16 nc_sien; /* -->: interrupt enable */
782/*42*/ u16 nc_sist; /* <--: interrupt status */
783 #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
784 #define STO 0x0400/* sta: timeout (select) */
785 #define GEN 0x0200/* sta: timeout (general) */
786 #define HTH 0x0100/* sta: timeout (handshake) */
787 #define MA 0x80 /* sta: phase mismatch */
788 #define CMP 0x40 /* sta: arbitration complete */
789 #define SEL 0x20 /* sta: selected by another device */
790 #define RSL 0x10 /* sta: reselected by another device*/
791 #define SGE 0x08 /* sta: gross error (over/underflow)*/
792 #define UDC 0x04 /* sta: unexpected disconnect */
793 #define RST 0x02 /* sta: scsi bus reset detected */
794 #define PAR 0x01 /* sta: scsi parity error */
795
796/*44*/ u8 nc_slpar;
797/*45*/ u8 nc_swide;
798/*46*/ u8 nc_macntl;
799/*47*/ u8 nc_gpcntl;
800/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
801/*49*/ u8 nc_stime1; /* cmd: timeout user defined */
802/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
803
804/*4c*/ u8 nc_stest0;
805
806/*4d*/ u8 nc_stest1;
807 #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
808 #define DBLEN 0x08 /* clock doubler running */
809 #define DBLSEL 0x04 /* clock doubler selected */
810
811
812/*4e*/ u8 nc_stest2;
813 #define ROF 0x40 /* reset scsi offset (after gross error!) */
814 #define DIF 0x20 /* 720 SCSI differential mode */
815 #define EXT 0x02 /* extended filtering */
816
817/*4f*/ u8 nc_stest3;
818 #define TE 0x80 /* c: tolerAnt enable */
819 #define HSC 0x20 /* c: Halt SCSI Clock */
820 #define CSF 0x02 /* c: clear scsi fifo */
821
822/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
823/*52*/ u8 nc_stest4;
824 #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
825 #define SMODE_HVD 0x40 /* High Voltage Differential */
826 #define SMODE_SE 0x80 /* Single Ended */
827 #define SMODE_LVD 0xc0 /* Low Voltage Differential */
828 #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
829 /* bits 0-5 rsvd for C1010 */
830
831/*53*/ u8 nc_53_;
832/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
833/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
834 #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
835 #define PMJCTL 0x40 /* Phase Mismatch Jump Control */
836 #define ENNDJ 0x20 /* Enable Non Data PM Jump */
837 #define DISFC 0x10 /* Disable Auto FIFO Clear */
838 #define DILS 0x02 /* Disable Internal Load/Store */
839 #define DPR 0x01 /* Disable Pipe Req */
840
841/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
842 #define ZMOD 0x80 /* High Impedance Mode */
843 #define DIC 0x10 /* Disable Internal Cycles */
844 #define DDAC 0x08 /* Disable Dual Address Cycle */
845 #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
846 #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
847 #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
848
849/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
850/*5a*/ u16 nc_5a_;
851
852/*5c*/ u8 nc_scr0; /* Working register B */
853/*5d*/ u8 nc_scr1; /* */
854/*5e*/ u8 nc_scr2; /* */
855/*5f*/ u8 nc_scr3; /* */
856
857/*60*/ u8 nc_scrx[64]; /* Working register C-R */
858/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
859/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
860/*a8*/ u32 nc_sfs; /* Script Fetch Selector */
861/*ac*/ u32 nc_drs; /* DSA Relative Selector */
862/*b0*/ u32 nc_sbms; /* Static Block Move Selector */
863/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
864/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
865/*bc*/ u16 nc_scntl4; /* C1010 only */
866 #define U3EN 0x80 /* Enable Ultra 3 */
867 #define AIPEN 0x40 /* Allow check upper byte lanes */
868 #define XCLKH_DT 0x08 /* Extra clock of data hold on DT
869 transfer edge */
870 #define XCLKH_ST 0x04 /* Extra clock of data hold on ST
871 transfer edge */
872
873/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
874/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
875
876/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
877/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
878/*c8*/ u8 nc_rbc; /* Remaining Byte Count */
879/*c9*/ u8 nc_rbc1; /* */
880/*ca*/ u8 nc_rbc2; /* */
881/*cb*/ u8 nc_rbc3; /* */
882
883/*cc*/ u8 nc_ua; /* Updated Address */
884/*cd*/ u8 nc_ua1; /* */
885/*ce*/ u8 nc_ua2; /* */
886/*cf*/ u8 nc_ua3; /* */
887/*d0*/ u32 nc_esa; /* Entry Storage Address */
888/*d4*/ u8 nc_ia; /* Instruction Address */
889/*d5*/ u8 nc_ia1;
890/*d6*/ u8 nc_ia2;
891/*d7*/ u8 nc_ia3;
892/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
893/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
894
895 /* Following for C1010 only */
896/*e0*/ u16 nc_crcpad; /* CRC Value */
897/*e2*/ u8 nc_crccntl0; /* CRC control register */
898 #define SNDCRC 0x10 /* Send CRC Request */
899/*e3*/ u8 nc_crccntl1; /* CRC control register */
900/*e4*/ u32 nc_crcdata; /* CRC data register */
901/*e8*/ u32 nc_e8_; /* rsvd */
902/*ec*/ u32 nc_ec_; /* rsvd */
903/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
904
905};
906
907/*-----------------------------------------------------------
908**
909** Utility macros for the script.
910**
911**-----------------------------------------------------------
912*/
913
914#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
915#define REG(r) REGJ (nc_, r)
916
917typedef u32 ncrcmd;
918
919/*-----------------------------------------------------------
920**
921** SCSI phases
922**
923** DT phases illegal for ncr driver.
924**
925**-----------------------------------------------------------
926*/
927
928#define SCR_DATA_OUT 0x00000000
929#define SCR_DATA_IN 0x01000000
930#define SCR_COMMAND 0x02000000
931#define SCR_STATUS 0x03000000
932#define SCR_DT_DATA_OUT 0x04000000
933#define SCR_DT_DATA_IN 0x05000000
934#define SCR_MSG_OUT 0x06000000
935#define SCR_MSG_IN 0x07000000
936
937#define SCR_ILG_OUT 0x04000000
938#define SCR_ILG_IN 0x05000000
939
940/*-----------------------------------------------------------
941**
942** Data transfer via SCSI.
943**
944**-----------------------------------------------------------
945**
946** MOVE_ABS (LEN)
947** <<start address>>
948**
949** MOVE_IND (LEN)
950** <<dnad_offset>>
951**
952** MOVE_TBL
953** <<dnad_offset>>
954**
955**-----------------------------------------------------------
956*/
957
958#define OPC_MOVE 0x08000000
959
960#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
961#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
962#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
963
964#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
965#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
966#define SCR_CHMOV_TBL (0x10000000)
967
968struct scr_tblmove {
969 u32 size;
970 u32 addr;
971};
972
973/*-----------------------------------------------------------
974**
975** Selection
976**
977**-----------------------------------------------------------
978**
979** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
980** <<alternate_address>>
981**
982** SEL_TBL | << dnad_offset>> [ | REL_JMP]
983** <<alternate_address>>
984**
985**-----------------------------------------------------------
986*/
987
988#define SCR_SEL_ABS 0x40000000
989#define SCR_SEL_ABS_ATN 0x41000000
990#define SCR_SEL_TBL 0x42000000
991#define SCR_SEL_TBL_ATN 0x43000000
992
993
994#ifdef SCSI_NCR_BIG_ENDIAN
995struct scr_tblsel {
996 u8 sel_scntl3;
997 u8 sel_id;
998 u8 sel_sxfer;
999 u8 sel_scntl4;
1000};
1001#else
1002struct scr_tblsel {
1003 u8 sel_scntl4;
1004 u8 sel_sxfer;
1005 u8 sel_id;
1006 u8 sel_scntl3;
1007};
1008#endif
1009
1010#define SCR_JMP_REL 0x04000000
1011#define SCR_ID(id) (((u32)(id)) << 16)
1012
1013/*-----------------------------------------------------------
1014**
1015** Waiting for Disconnect or Reselect
1016**
1017**-----------------------------------------------------------
1018**
1019** WAIT_DISC
1020** dummy: <<alternate_address>>
1021**
1022** WAIT_RESEL
1023** <<alternate_address>>
1024**
1025**-----------------------------------------------------------
1026*/
1027
1028#define SCR_WAIT_DISC 0x48000000
1029#define SCR_WAIT_RESEL 0x50000000
1030
1031/*-----------------------------------------------------------
1032**
1033** Bit Set / Reset
1034**
1035**-----------------------------------------------------------
1036**
1037** SET (flags {|.. })
1038**
1039** CLR (flags {|.. })
1040**
1041**-----------------------------------------------------------
1042*/
1043
1044#define SCR_SET(f) (0x58000000 | (f))
1045#define SCR_CLR(f) (0x60000000 | (f))
1046
1047#define SCR_CARRY 0x00000400
1048#define SCR_TRG 0x00000200
1049#define SCR_ACK 0x00000040
1050#define SCR_ATN 0x00000008
1051
1052
1053
1054
1055/*-----------------------------------------------------------
1056**
1057** Memory to memory move
1058**
1059**-----------------------------------------------------------
1060**
1061** COPY (bytecount)
1062** << source_address >>
1063** << destination_address >>
1064**
1065** SCR_COPY sets the NO FLUSH option by default.
1066** SCR_COPY_F does not set this option.
1067**
1068** For chips which do not support this option,
1069** ncr_copy_and_bind() will remove this bit.
1070**-----------------------------------------------------------
1071*/
1072
1073#define SCR_NO_FLUSH 0x01000000
1074
1075#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
1076#define SCR_COPY_F(n) (0xc0000000 | (n))
1077
1078/*-----------------------------------------------------------
1079**
1080** Register move and binary operations
1081**
1082**-----------------------------------------------------------
1083**
1084** SFBR_REG (reg, op, data) reg = SFBR op data
1085** << 0 >>
1086**
1087** REG_SFBR (reg, op, data) SFBR = reg op data
1088** << 0 >>
1089**
1090** REG_REG (reg, op, data) reg = reg op data
1091** << 0 >>
1092**
1093**-----------------------------------------------------------
1094** On 810A, 860, 825A, 875, 895 and 896 chips the content
1095** of SFBR register can be used as data (SCR_SFBR_DATA).
Matt LaPlante0779bf22006-11-30 05:24:39 +01001096** The 896 has additional IO registers starting at
Matthew Wilcox19c65092005-12-16 12:50:53 -05001097** offset 0x80. Bit 7 of register offset is stored in
1098** bit 7 of the SCRIPTS instruction first DWORD.
1099**-----------------------------------------------------------
1100*/
1101
1102#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
1103
1104#define SCR_SFBR_REG(reg,op,data) \
1105 (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1106
1107#define SCR_REG_SFBR(reg,op,data) \
1108 (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1109
1110#define SCR_REG_REG(reg,op,data) \
1111 (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
1112
1113
1114#define SCR_LOAD 0x00000000
1115#define SCR_SHL 0x01000000
1116#define SCR_OR 0x02000000
1117#define SCR_XOR 0x03000000
1118#define SCR_AND 0x04000000
1119#define SCR_SHR 0x05000000
1120#define SCR_ADD 0x06000000
1121#define SCR_ADDC 0x07000000
1122
1123#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
1124
1125/*-----------------------------------------------------------
1126**
1127** FROM_REG (reg) SFBR = reg
1128** << 0 >>
1129**
1130** TO_REG (reg) reg = SFBR
1131** << 0 >>
1132**
1133** LOAD_REG (reg, data) reg = <data>
1134** << 0 >>
1135**
1136** LOAD_SFBR(data) SFBR = <data>
1137** << 0 >>
1138**
1139**-----------------------------------------------------------
1140*/
1141
1142#define SCR_FROM_REG(reg) \
1143 SCR_REG_SFBR(reg,SCR_OR,0)
1144
1145#define SCR_TO_REG(reg) \
1146 SCR_SFBR_REG(reg,SCR_OR,0)
1147
1148#define SCR_LOAD_REG(reg,data) \
1149 SCR_REG_REG(reg,SCR_LOAD,data)
1150
1151#define SCR_LOAD_SFBR(data) \
1152 (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
1153
1154/*-----------------------------------------------------------
1155**
1156** LOAD from memory to register.
1157** STORE from register to memory.
1158**
1159** Only supported by 810A, 860, 825A, 875, 895 and 896.
1160**
1161**-----------------------------------------------------------
1162**
1163** LOAD_ABS (LEN)
1164** <<start address>>
1165**
1166** LOAD_REL (LEN) (DSA relative)
1167** <<dsa_offset>>
1168**
1169**-----------------------------------------------------------
1170*/
1171
1172#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
1173#define SCR_NO_FLUSH2 0x02000000
1174#define SCR_DSA_REL2 0x10000000
1175
1176#define SCR_LOAD_R(reg, how, n) \
1177 (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
1178
1179#define SCR_STORE_R(reg, how, n) \
1180 (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
1181
1182#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
1183#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
1184#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
1185#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
1186
1187#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
1188#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
1189#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
1190#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
1191
1192
1193/*-----------------------------------------------------------
1194**
1195** Waiting for Disconnect or Reselect
1196**
1197**-----------------------------------------------------------
1198**
1199** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
1200** <<address>>
1201**
1202** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
1203** <<distance>>
1204**
1205** CALL [ | IFTRUE/IFFALSE ( ... ) ]
1206** <<address>>
1207**
1208** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
1209** <<distance>>
1210**
1211** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
1212** <<dummy>>
1213**
1214** INT [ | IFTRUE/IFFALSE ( ... ) ]
1215** <<ident>>
1216**
1217** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
1218** <<ident>>
1219**
1220** Conditions:
1221** WHEN (phase)
1222** IF (phase)
1223** CARRYSET
1224** DATA (data, mask)
1225**
1226**-----------------------------------------------------------
1227*/
1228
1229#define SCR_NO_OP 0x80000000
1230#define SCR_JUMP 0x80080000
1231#define SCR_JUMP64 0x80480000
1232#define SCR_JUMPR 0x80880000
1233#define SCR_CALL 0x88080000
1234#define SCR_CALLR 0x88880000
1235#define SCR_RETURN 0x90080000
1236#define SCR_INT 0x98080000
1237#define SCR_INT_FLY 0x98180000
1238
1239#define IFFALSE(arg) (0x00080000 | (arg))
1240#define IFTRUE(arg) (0x00000000 | (arg))
1241
1242#define WHEN(phase) (0x00030000 | (phase))
1243#define IF(phase) (0x00020000 | (phase))
1244
1245#define DATA(D) (0x00040000 | ((D) & 0xff))
1246#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
1247
1248#define CARRYSET (0x00200000)
1249
1250/*-----------------------------------------------------------
1251**
1252** SCSI constants.
1253**
1254**-----------------------------------------------------------
1255*/
1256
1257/*
Matthew Wilcox19c65092005-12-16 12:50:53 -05001258** Status
1259*/
1260
1261#define S_GOOD (0x00)
1262#define S_CHECK_COND (0x02)
1263#define S_COND_MET (0x04)
1264#define S_BUSY (0x08)
1265#define S_INT (0x10)
1266#define S_INT_COND_MET (0x14)
1267#define S_CONFLICT (0x18)
1268#define S_TERMINATED (0x20)
1269#define S_QUEUE_FULL (0x28)
1270#define S_ILLEGAL (0xff)
1271#define S_SENSE (0x80)
1272
1273/*
1274 * End of ncrreg from FreeBSD
1275 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001276
1277/*
1278 Build a scatter/gather entry.
1279 see sym53c8xx_2/sym_hipd.h for more detailed sym_build_sge()
1280 implementation ;)
1281 */
1282
1283#define ncr_build_sge(np, data, badd, len) \
1284do { \
1285 (data)->addr = cpu_to_scr(badd); \
1286 (data)->size = cpu_to_scr(len); \
1287} while (0)
1288
1289/*==========================================================
1290**
1291** Structures used by the detection routine to transmit
1292** device configuration to the attach function.
1293**
1294**==========================================================
1295*/
1296struct ncr_slot {
1297 u_long base;
1298 u_long base_2;
1299 u_long base_c;
1300 u_long base_2_c;
1301 void __iomem *base_v;
1302 void __iomem *base_2_v;
1303 int irq;
1304/* port and reg fields to use INB, OUTB macros */
1305 volatile struct ncr_reg __iomem *reg;
1306};
1307
1308/*==========================================================
1309**
1310** Structure used by detection routine to save data on
1311** each detected board for attach.
1312**
1313**==========================================================
1314*/
1315struct ncr_device {
1316 struct device *dev;
1317 struct ncr_slot slot;
1318 struct ncr_chip chip;
1319 u_char host_id;
1320 u8 differential;
1321};
1322
1323extern struct Scsi_Host *ncr_attach(struct scsi_host_template *tpnt, int unit, struct ncr_device *device);
Matthew Wilcoxdffe8072007-08-15 12:56:56 -06001324extern void ncr53c8xx_release(struct Scsi_Host *host);
David Howells7d12e782006-10-05 14:55:46 +01001325irqreturn_t ncr53c8xx_intr(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001326extern int ncr53c8xx_init(void);
1327extern void ncr53c8xx_exit(void);
1328
1329#endif /* NCR53C8XX_H */