blob: d8322d2d1e2908b0412ad5b7220e8483a04aa3e9 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* wd.c: A WD80x3 ethernet driver for linux. */
2/*
3 Written 1993-94 by Donald Becker.
4
5 Copyright 1993 United States Government as represented by the
6 Director, National Security Agency.
7
8 This software may be used and distributed according to the terms
9 of the GNU General Public License, incorporated herein by reference.
10
11 The author may be reached as becker@scyld.com, or C/O
12 Scyld Computing Corporation
13 410 Severn Ave., Suite 210
14 Annapolis MD 21403
15
16 This is a driver for WD8003 and WD8013 "compatible" ethercards.
17
18 Thanks to Russ Nelson (nelson@crnwyr.com) for loaning me a WD8013.
19
20 Changelog:
21
22 Paul Gortmaker : multiple card support for module users, support
23 for non-standard memory sizes.
24
25
26*/
27
28static const char version[] =
29 "wd.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
30
31#include <linux/module.h>
32#include <linux/kernel.h>
33#include <linux/errno.h>
34#include <linux/string.h>
35#include <linux/init.h>
36#include <linux/interrupt.h>
37#include <linux/delay.h>
38#include <linux/netdevice.h>
39#include <linux/etherdevice.h>
40
41#include <asm/io.h>
42#include <asm/system.h>
43
44#include "8390.h"
45
46#define DRV_NAME "wd"
47
48/* A zero-terminated list of I/O addresses to be probed. */
49static unsigned int wd_portlist[] __initdata =
50{0x300, 0x280, 0x380, 0x240, 0};
51
52static int wd_probe1(struct net_device *dev, int ioaddr);
53
54static int wd_open(struct net_device *dev);
55static void wd_reset_8390(struct net_device *dev);
56static void wd_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
57 int ring_page);
58static void wd_block_input(struct net_device *dev, int count,
59 struct sk_buff *skb, int ring_offset);
60static void wd_block_output(struct net_device *dev, int count,
61 const unsigned char *buf, int start_page);
62static int wd_close(struct net_device *dev);
63
Jeff Garzik6aa20a22006-09-13 13:24:59 -040064
Linus Torvalds1da177e2005-04-16 15:20:36 -070065#define WD_START_PG 0x00 /* First page of TX buffer */
66#define WD03_STOP_PG 0x20 /* Last page +1 of RX ring */
67#define WD13_STOP_PG 0x40 /* Last page +1 of RX ring */
68
69#define WD_CMDREG 0 /* Offset to ASIC command register. */
70#define WD_RESET 0x80 /* Board reset, in WD_CMDREG. */
71#define WD_MEMENB 0x40 /* Enable the shared memory. */
72#define WD_CMDREG5 5 /* Offset to 16-bit-only ASIC register 5. */
73#define ISA16 0x80 /* Enable 16 bit access from the ISA bus. */
74#define NIC16 0x40 /* Enable 16 bit access from the 8390. */
75#define WD_NIC_OFFSET 16 /* Offset to the 8390 from the base_addr. */
76#define WD_IO_EXTENT 32
77
Jeff Garzik6aa20a22006-09-13 13:24:59 -040078
Linus Torvalds1da177e2005-04-16 15:20:36 -070079/* Probe for the WD8003 and WD8013. These cards have the station
80 address PROM at I/O ports <base>+8 to <base>+13, with a checksum
81 following. A Soundblaster can have the same checksum as an WDethercard,
82 so we have an extra exclusionary check for it.
83
84 The wd_probe1() routine initializes the card and fills the
85 station address field. */
86
87static int __init do_wd_probe(struct net_device *dev)
88{
89 int i;
90 struct resource *r;
91 int base_addr = dev->base_addr;
92 int irq = dev->irq;
93 int mem_start = dev->mem_start;
94 int mem_end = dev->mem_end;
95
Linus Torvalds1da177e2005-04-16 15:20:36 -070096 if (base_addr > 0x1ff) { /* Check a user specified location. */
97 r = request_region(base_addr, WD_IO_EXTENT, "wd-probe");
98 if ( r == NULL)
99 return -EBUSY;
100 i = wd_probe1(dev, base_addr);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400101 if (i != 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700102 release_region(base_addr, WD_IO_EXTENT);
103 else
104 r->name = dev->name;
105 return i;
106 }
107 else if (base_addr != 0) /* Don't probe at all. */
108 return -ENXIO;
109
110 for (i = 0; wd_portlist[i]; i++) {
111 int ioaddr = wd_portlist[i];
112 r = request_region(ioaddr, WD_IO_EXTENT, "wd-probe");
113 if (r == NULL)
114 continue;
115 if (wd_probe1(dev, ioaddr) == 0) {
116 r->name = dev->name;
117 return 0;
118 }
119 release_region(ioaddr, WD_IO_EXTENT);
120 dev->irq = irq;
121 dev->mem_start = mem_start;
122 dev->mem_end = mem_end;
123 }
124
125 return -ENODEV;
126}
127
Linus Torvalds1da177e2005-04-16 15:20:36 -0700128#ifndef MODULE
129struct net_device * __init wd_probe(int unit)
130{
131 struct net_device *dev = alloc_ei_netdev();
132 int err;
133
134 if (!dev)
135 return ERR_PTR(-ENOMEM);
136
137 sprintf(dev->name, "eth%d", unit);
138 netdev_boot_setup_check(dev);
139
140 err = do_wd_probe(dev);
141 if (err)
142 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143 return dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144out:
145 free_netdev(dev);
146 return ERR_PTR(err);
147}
148#endif
149
Stephen Hemminger458228b2008-11-25 18:21:56 -0800150static const struct net_device_ops wd_netdev_ops = {
151 .ndo_open = wd_open,
152 .ndo_stop = wd_close,
153 .ndo_start_xmit = ei_start_xmit,
154 .ndo_tx_timeout = ei_tx_timeout,
155 .ndo_get_stats = ei_get_stats,
156 .ndo_set_multicast_list = ei_set_multicast_list,
157 .ndo_validate_addr = eth_validate_addr,
Stephen Hemmingerfe96aaa2009-01-09 11:13:14 +0000158 .ndo_set_mac_address = eth_mac_addr,
Stephen Hemminger458228b2008-11-25 18:21:56 -0800159 .ndo_change_mtu = eth_change_mtu,
160#ifdef CONFIG_NET_POLL_CONTROLLER
161 .ndo_poll_controller = ei_poll,
162#endif
163};
164
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165static int __init wd_probe1(struct net_device *dev, int ioaddr)
166{
167 int i;
b1fc5502005-05-12 20:11:55 -0400168 int err;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169 int checksum = 0;
170 int ancient = 0; /* An old card without config registers. */
171 int word16 = 0; /* 0 = 8 bit, 1 = 16 bit */
172 const char *model_name;
173 static unsigned version_printed;
174
175 for (i = 0; i < 8; i++)
176 checksum += inb(ioaddr + 8 + i);
177 if (inb(ioaddr + 8) == 0xff /* Extra check to avoid soundcard. */
178 || inb(ioaddr + 9) == 0xff
179 || (checksum & 0xff) != 0xFF)
180 return -ENODEV;
181
182 /* Check for semi-valid mem_start/end values if supplied. */
183 if ((dev->mem_start % 0x2000) || (dev->mem_end % 0x2000)) {
184 printk(KERN_WARNING "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n");
185 dev->mem_start = 0;
186 dev->mem_end = 0;
187 }
188
189 if (ei_debug && version_printed++ == 0)
190 printk(version);
191
Linus Torvalds1da177e2005-04-16 15:20:36 -0700192 for (i = 0; i < 6; i++)
Joe Perches0795af52007-10-03 17:59:30 -0700193 dev->dev_addr[i] = inb(ioaddr + 8 + i);
194
Johannes Berge1749612008-10-27 15:59:26 -0700195 printk("%s: WD80x3 at %#3x, %pM",
196 dev->name, ioaddr, dev->dev_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700197
198 /* The following PureData probe code was contributed by
199 Mike Jagdis <jaggy@purplet.demon.co.uk>. Puredata does software
200 configuration differently from others so we have to check for them.
201 This detects an 8 bit, 16 bit or dumb (Toshiba, jumpered) card.
202 */
203 if (inb(ioaddr+0) == 'P' && inb(ioaddr+1) == 'D') {
204 unsigned char reg5 = inb(ioaddr+5);
205
206 switch (inb(ioaddr+2)) {
207 case 0x03: word16 = 0; model_name = "PDI8023-8"; break;
208 case 0x05: word16 = 0; model_name = "PDUC8023"; break;
209 case 0x0a: word16 = 1; model_name = "PDI8023-16"; break;
210 /* Either 0x01 (dumb) or they've released a new version. */
211 default: word16 = 0; model_name = "PDI8023"; break;
212 }
213 dev->mem_start = ((reg5 & 0x1c) + 0xc0) << 12;
214 dev->irq = (reg5 & 0xe0) == 0xe0 ? 10 : (reg5 >> 5) + 1;
215 } else { /* End of PureData probe */
216 /* This method of checking for a 16-bit board is borrowed from the
217 we.c driver. A simpler method is just to look in ASIC reg. 0x03.
218 I'm comparing the two method in alpha test to make certain they
219 return the same result. */
220 /* Check for the old 8 bit board - it has register 0/8 aliasing.
221 Do NOT check i>=6 here -- it hangs the old 8003 boards! */
222 for (i = 0; i < 6; i++)
223 if (inb(ioaddr+i) != inb(ioaddr+8+i))
224 break;
225 if (i >= 6) {
226 ancient = 1;
227 model_name = "WD8003-old";
228 word16 = 0;
229 } else {
230 int tmp = inb(ioaddr+1); /* fiddle with 16bit bit */
231 outb( tmp ^ 0x01, ioaddr+1 ); /* attempt to clear 16bit bit */
232 if (((inb( ioaddr+1) & 0x01) == 0x01) /* A 16 bit card */
233 && (tmp & 0x01) == 0x01 ) { /* In a 16 slot. */
234 int asic_reg5 = inb(ioaddr+WD_CMDREG5);
235 /* Magic to set ASIC to word-wide mode. */
236 outb( NIC16 | (asic_reg5&0x1f), ioaddr+WD_CMDREG5);
237 outb(tmp, ioaddr+1);
238 model_name = "WD8013";
239 word16 = 1; /* We have a 16bit board here! */
240 } else {
241 model_name = "WD8003";
242 word16 = 0;
243 }
244 outb(tmp, ioaddr+1); /* Restore original reg1 value. */
245 }
246#ifndef final_version
247 if ( !ancient && (inb(ioaddr+1) & 0x01) != (word16 & 0x01))
248 printk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).",
249 word16 ? 16 : 8, (inb(ioaddr+1) & 0x01) ? 16 : 8);
250#endif
251 }
252
253#if defined(WD_SHMEM) && WD_SHMEM > 0x80000
254 /* Allow a compile-time override. */
255 dev->mem_start = WD_SHMEM;
256#else
257 if (dev->mem_start == 0) {
258 /* Sanity and old 8003 check */
259 int reg0 = inb(ioaddr);
260 if (reg0 == 0xff || reg0 == 0) {
261 /* Future plan: this could check a few likely locations first. */
262 dev->mem_start = 0xd0000;
263 printk(" assigning address %#lx", dev->mem_start);
264 } else {
265 int high_addr_bits = inb(ioaddr+WD_CMDREG5) & 0x1f;
266 /* Some boards don't have the register 5 -- it returns 0xff. */
267 if (high_addr_bits == 0x1f || word16 == 0)
268 high_addr_bits = 0x01;
269 dev->mem_start = ((reg0&0x3f) << 13) + (high_addr_bits << 19);
270 }
271 }
272#endif
273
274 /* The 8390 isn't at the base address -- the ASIC regs are there! */
275 dev->base_addr = ioaddr+WD_NIC_OFFSET;
276
277 if (dev->irq < 2) {
278 int irqmap[] = {9,3,5,7,10,11,15,4};
279 int reg1 = inb(ioaddr+1);
280 int reg4 = inb(ioaddr+4);
281 if (ancient || reg1 == 0xff) { /* Ack!! No way to read the IRQ! */
282 short nic_addr = ioaddr+WD_NIC_OFFSET;
283 unsigned long irq_mask;
284
285 /* We have an old-style ethercard that doesn't report its IRQ
286 line. Do autoirq to find the IRQ line. Note that this IS NOT
287 a reliable way to trigger an interrupt. */
288 outb_p(E8390_NODMA + E8390_STOP, nic_addr);
289 outb(0x00, nic_addr+EN0_IMR); /* Disable all intrs. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400290
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291 irq_mask = probe_irq_on();
292 outb_p(0xff, nic_addr + EN0_IMR); /* Enable all interrupts. */
293 outb_p(0x00, nic_addr + EN0_RCNTLO);
294 outb_p(0x00, nic_addr + EN0_RCNTHI);
295 outb(E8390_RREAD+E8390_START, nic_addr); /* Trigger it... */
296 mdelay(20);
297 dev->irq = probe_irq_off(irq_mask);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400298
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299 outb_p(0x00, nic_addr+EN0_IMR); /* Mask all intrs. again. */
300
301 if (ei_debug > 2)
302 printk(" autoirq is %d", dev->irq);
303 if (dev->irq < 2)
304 dev->irq = word16 ? 10 : 5;
305 } else
306 dev->irq = irqmap[((reg4 >> 5) & 0x03) + (reg1 & 0x04)];
307 } else if (dev->irq == 2) /* Fixup bogosity: IRQ2 is really IRQ9 */
308 dev->irq = 9;
309
310 /* Snarf the interrupt now. There's no point in waiting since we cannot
311 share and the board will usually be enabled. */
312 i = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev);
313 if (i) {
314 printk (" unable to get IRQ %d.\n", dev->irq);
315 return i;
316 }
317
318 /* OK, were are certain this is going to work. Setup the device. */
319 ei_status.name = model_name;
320 ei_status.word16 = word16;
321 ei_status.tx_start_page = WD_START_PG;
322 ei_status.rx_start_page = WD_START_PG + TX_PAGES;
323
324 /* Don't map in the shared memory until the board is actually opened. */
325
326 /* Some cards (eg WD8003EBT) can be jumpered for more (32k!) memory. */
327 if (dev->mem_end != 0) {
328 ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;
329 ei_status.priv = dev->mem_end - dev->mem_start;
330 } else {
331 ei_status.stop_page = word16 ? WD13_STOP_PG : WD03_STOP_PG;
332 dev->mem_end = dev->mem_start + (ei_status.stop_page - WD_START_PG)*256;
333 ei_status.priv = (ei_status.stop_page - WD_START_PG)*256;
334 }
335
336 ei_status.mem = ioremap(dev->mem_start, ei_status.priv);
337 if (!ei_status.mem) {
338 free_irq(dev->irq, dev);
339 return -ENOMEM;
340 }
341
342 printk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n",
343 model_name, dev->irq, dev->mem_start, dev->mem_end-1);
344
345 ei_status.reset_8390 = &wd_reset_8390;
346 ei_status.block_input = &wd_block_input;
347 ei_status.block_output = &wd_block_output;
348 ei_status.get_8390_hdr = &wd_get_8390_hdr;
Stephen Hemminger458228b2008-11-25 18:21:56 -0800349
350 dev->netdev_ops = &wd_netdev_ops;
Alan Coxd3d7b532008-08-22 19:24:15 +0100351 NS8390_init(dev, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700352
353#if 1
354 /* Enable interrupt generation on softconfig cards -- M.U */
355 /* .. but possibly potentially unsafe - Donald */
356 if (inb(ioaddr+14) & 0x20)
357 outb(inb(ioaddr+4)|0x80, ioaddr+4);
358#endif
359
b1fc5502005-05-12 20:11:55 -0400360 err = register_netdev(dev);
361 if (err)
362 free_irq(dev->irq, dev);
363 return err;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700364}
365
366static int
367wd_open(struct net_device *dev)
368{
369 int ioaddr = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
370
371 /* Map in the shared memory. Always set register 0 last to remain
372 compatible with very old boards. */
373 ei_status.reg0 = ((dev->mem_start>>13) & 0x3f) | WD_MEMENB;
374 ei_status.reg5 = ((dev->mem_start>>19) & 0x1f) | NIC16;
375
376 if (ei_status.word16)
377 outb(ei_status.reg5, ioaddr+WD_CMDREG5);
378 outb(ei_status.reg0, ioaddr); /* WD_CMDREG */
379
Stephen Hemminger458228b2008-11-25 18:21:56 -0800380 return ei_open(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700381}
382
383static void
384wd_reset_8390(struct net_device *dev)
385{
386 int wd_cmd_port = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
387
388 outb(WD_RESET, wd_cmd_port);
389 if (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies);
390 ei_status.txing = 0;
391
392 /* Set up the ASIC registers, just in case something changed them. */
393 outb((((dev->mem_start>>13) & 0x3f)|WD_MEMENB), wd_cmd_port);
394 if (ei_status.word16)
395 outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5);
396
397 if (ei_debug > 1) printk("reset done\n");
398 return;
399}
400
401/* Grab the 8390 specific header. Similar to the block_input routine, but
402 we don't need to be concerned with ring wrap as the header will be at
403 the start of a page, so we optimize accordingly. */
404
405static void
406wd_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
407{
408
409 int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
410 void __iomem *hdr_start = ei_status.mem + ((ring_page - WD_START_PG)<<8);
411
412 /* We'll always get a 4 byte header read followed by a packet read, so
413 we enable 16 bit mode before the header, and disable after the body. */
414 if (ei_status.word16)
415 outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5);
416
417#ifdef __BIG_ENDIAN
418 /* Officially this is what we are doing, but the readl() is faster */
419 /* unfortunately it isn't endian aware of the struct */
420 memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
421 hdr->count = le16_to_cpu(hdr->count);
422#else
423 ((unsigned int*)hdr)[0] = readl(hdr_start);
424#endif
425}
426
427/* Block input and output are easy on shared memory ethercards, and trivial
428 on the Western digital card where there is no choice of how to do it.
429 The only complications are that the ring buffer wraps, and need to map
430 switch between 8- and 16-bit modes. */
431
432static void
433wd_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
434{
435 int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
436 unsigned long offset = ring_offset - (WD_START_PG<<8);
437 void __iomem *xfer_start = ei_status.mem + offset;
438
439 if (offset + count > ei_status.priv) {
440 /* We must wrap the input move. */
441 int semi_count = ei_status.priv - offset;
442 memcpy_fromio(skb->data, xfer_start, semi_count);
443 count -= semi_count;
444 memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
445 } else {
446 /* Packet is in one chunk -- we can copy + cksum. */
Al Viro4ec03112007-02-09 16:38:30 +0000447 memcpy_fromio(skb->data, xfer_start, count);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700448 }
449
450 /* Turn off 16 bit access so that reboot works. ISA brain-damage */
451 if (ei_status.word16)
452 outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5);
453}
454
455static void
456wd_block_output(struct net_device *dev, int count, const unsigned char *buf,
457 int start_page)
458{
459 int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
460 void __iomem *shmem = ei_status.mem + ((start_page - WD_START_PG)<<8);
461
462
463 if (ei_status.word16) {
464 /* Turn on and off 16 bit access so that reboot works. */
465 outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5);
466 memcpy_toio(shmem, buf, count);
467 outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5);
468 } else
469 memcpy_toio(shmem, buf, count);
470}
471
472
473static int
474wd_close(struct net_device *dev)
475{
476 int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */
477
478 if (ei_debug > 1)
479 printk("%s: Shutting down ethercard.\n", dev->name);
480 ei_close(dev);
481
482 /* Change from 16-bit to 8-bit shared memory so reboot works. */
483 if (ei_status.word16)
484 outb(ei_status.reg5, wd_cmdreg + WD_CMDREG5 );
485
486 /* And disable the shared memory. */
487 outb(ei_status.reg0 & ~WD_MEMENB, wd_cmdreg);
488
489 return 0;
490}
491
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400492
Linus Torvalds1da177e2005-04-16 15:20:36 -0700493#ifdef MODULE
494#define MAX_WD_CARDS 4 /* Max number of wd cards per module */
495static struct net_device *dev_wd[MAX_WD_CARDS];
496static int io[MAX_WD_CARDS];
497static int irq[MAX_WD_CARDS];
498static int mem[MAX_WD_CARDS];
499static int mem_end[MAX_WD_CARDS]; /* for non std. mem size */
500
501module_param_array(io, int, NULL, 0);
502module_param_array(irq, int, NULL, 0);
503module_param_array(mem, int, NULL, 0);
504module_param_array(mem_end, int, NULL, 0);
505MODULE_PARM_DESC(io, "I/O base address(es)");
506MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)");
507MODULE_PARM_DESC(mem, "memory base address(es)(ignored for PureData boards)");
508MODULE_PARM_DESC(mem_end, "memory end address(es)");
509MODULE_DESCRIPTION("ISA Western Digital wd8003/wd8013 ; SMC Elite, Elite16 ethernet driver");
510MODULE_LICENSE("GPL");
511
512/* This is set up so that only a single autoprobe takes place per call.
513ISA device autoprobes on a running machine are not recommended. */
Andrew Morton5e5fa012006-08-14 23:00:06 -0700514
515int __init init_module(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516{
517 struct net_device *dev;
518 int this_dev, found = 0;
519
520 for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) {
521 if (io[this_dev] == 0) {
522 if (this_dev != 0) break; /* only autoprobe 1st one */
523 printk(KERN_NOTICE "wd.c: Presently autoprobing (not recommended) for a single card.\n");
524 }
525 dev = alloc_ei_netdev();
526 if (!dev)
527 break;
528 dev->irq = irq[this_dev];
529 dev->base_addr = io[this_dev];
530 dev->mem_start = mem[this_dev];
531 dev->mem_end = mem_end[this_dev];
532 if (do_wd_probe(dev) == 0) {
b1fc5502005-05-12 20:11:55 -0400533 dev_wd[found++] = dev;
534 continue;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700535 }
536 free_netdev(dev);
537 printk(KERN_WARNING "wd.c: No wd80x3 card found (i/o = 0x%x).\n", io[this_dev]);
538 break;
539 }
540 if (found)
541 return 0;
542 return -ENXIO;
543}
544
Denis Vlasenko64916f12006-01-05 22:45:47 -0800545static void cleanup_card(struct net_device *dev)
546{
547 free_irq(dev->irq, dev);
548 release_region(dev->base_addr - WD_NIC_OFFSET, WD_IO_EXTENT);
549 iounmap(ei_status.mem);
550}
551
Al Viroafc8eb42006-06-14 18:50:53 -0400552void __exit
Linus Torvalds1da177e2005-04-16 15:20:36 -0700553cleanup_module(void)
554{
555 int this_dev;
556
557 for (this_dev = 0; this_dev < MAX_WD_CARDS; this_dev++) {
558 struct net_device *dev = dev_wd[this_dev];
559 if (dev) {
560 unregister_netdev(dev);
561 cleanup_card(dev);
562 free_netdev(dev);
563 }
564 }
565}
566#endif /* MODULE */