blob: 90462eb23d02af5683bcd2361d7af16686c4a994 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001config H8300
2 bool
3 default y
Sam Ravnborgec7748b2008-02-09 10:46:40 +01004 select HAVE_IDE
Thomas Gleixner51f3f152011-01-19 12:26:32 +01005 select HAVE_GENERIC_HARDIRQS
Catalin Marinasaf1839e2012-10-08 16:28:08 -07006 select HAVE_UID16
Will Deaconc1d7e012012-07-30 14:42:46 -07007 select ARCH_WANT_IPC_PARSE_VERSION
Thomas Gleixner9f7b2182011-03-24 19:15:36 +01008 select GENERIC_IRQ_SHOW
Ben Hutchings9f13a1f2012-01-10 03:04:32 +00009 select GENERIC_CPU_DEVICES
Linus Torvalds1da177e2005-04-16 15:20:36 -070010
Alan Jenkins9e1b9b82009-11-07 21:03:54 +000011config SYMBOL_PREFIX
12 string
13 default "_"
14
Linus Torvalds1da177e2005-04-16 15:20:36 -070015config MMU
16 bool
17 default n
18
19config SWAP
20 bool
21 default n
22
Christoph Lameter66701b12007-02-10 01:43:09 -080023config ZONE_DMA
24 bool
25 default y
26
Linus Torvalds1da177e2005-04-16 15:20:36 -070027config FPU
28 bool
29 default n
30
Linus Torvalds1da177e2005-04-16 15:20:36 -070031config RWSEM_GENERIC_SPINLOCK
32 bool
33 default y
34
35config RWSEM_XCHGADD_ALGORITHM
36 bool
37 default n
38
David Howellsf0d1b0b2006-12-08 02:37:49 -080039config ARCH_HAS_ILOG2_U32
40 bool
41 default n
42
43config ARCH_HAS_ILOG2_U64
44 bool
45 default n
46
Akinobu Mitaf6e02132006-03-26 01:39:23 -080047config GENERIC_HWEIGHT
48 bool
49 default y
50
Linus Torvalds1da177e2005-04-16 15:20:36 -070051config GENERIC_CALIBRATE_DELAY
52 bool
53 default y
54
Yoshinori Sato9791af52008-10-15 22:01:17 -070055config GENERIC_BUG
56 bool
57 depends on BUG
58
Ingo Molnar06027bd2006-02-14 13:53:15 -080059config TIME_LOW_RES
60 bool
61 default y
62
Al Viro5ea81762007-02-11 15:41:31 +000063config NO_IOPORT
64 def_bool y
65
Dan Williams1b0fac42007-07-15 23:40:26 -070066config NO_DMA
67 def_bool y
68
Linus Torvalds1da177e2005-04-16 15:20:36 -070069config ISA
70 bool
71 default y
72
73config PCI
74 bool
75 default n
76
H. Peter Anvinbdc80782008-02-08 04:21:26 -080077config HZ
78 int
79 default 100
80
Linus Torvalds1da177e2005-04-16 15:20:36 -070081source "init/Kconfig"
82
Matt Helsleydc52ddc2008-10-18 20:27:21 -070083source "kernel/Kconfig.freezer"
84
Linus Torvalds1da177e2005-04-16 15:20:36 -070085source "arch/h8300/Kconfig.cpu"
86
87menu "Executable file formats"
88
89source "fs/Kconfig.binfmt"
90
91endmenu
92
Sam Ravnborgd5950b42005-07-11 21:03:49 -070093source "net/Kconfig"
94
Linus Torvalds1da177e2005-04-16 15:20:36 -070095source "drivers/base/Kconfig"
96
97source "drivers/mtd/Kconfig"
98
99source "drivers/block/Kconfig"
100
101source "drivers/ide/Kconfig"
102
103source "arch/h8300/Kconfig.ide"
104
Sam Ravnborgd5950b42005-07-11 21:03:49 -0700105source "drivers/net/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700106
107#
108# input - input/joystick depends on it. As does USB.
109#
110source "drivers/input/Kconfig"
111
112menu "Character devices"
113
114config VT
115 bool "Virtual terminal"
116 ---help---
117 If you say Y here, you will get support for terminal devices with
118 display and keyboard devices. These are called "virtual" because you
119 can run several virtual terminals (also called virtual consoles) on
120 one physical terminal. This is rather useful, for example one
121 virtual terminal can collect system messages and warnings, another
122 one can be used for a text-mode user session, and a third could run
123 an X session, all in parallel. Switching between virtual terminals
124 is done with certain key combinations, usually Alt-<function key>.
125
126 The setterm command ("man setterm") can be used to change the
127 properties (such as colors or beeping) of a virtual terminal. The
128 man page console_codes(4) ("man console_codes") contains the special
129 character sequences that can be used to change those properties
130 directly. The fonts used on virtual terminals can be changed with
131 the setfont ("man setfont") command and the key bindings are defined
132 with the loadkeys ("man loadkeys") command.
133
134 You need at least one virtual terminal device in order to make use
135 of your keyboard and monitor. Therefore, only people configuring an
136 embedded system would want to say N here in order to save some
137 memory; the only way to log into such a system is then via a serial
138 or network connection.
139
140 If unsure, say Y, or else you won't be able to do much with your new
141 shiny Linux system :-)
142
143config VT_CONSOLE
144 bool "Support for console on virtual terminal"
145 depends on VT
146 ---help---
147 The system console is the device which receives all kernel messages
148 and warnings and which allows logins in single user mode. If you
149 answer Y here, a virtual terminal (the device used to interact with
150 a physical terminal) can be used as system console. This is the most
151 common mode of operations, so you should say Y here unless you want
152 the kernel messages be output only to a serial port (in which case
153 you should say Y to "Console on serial port", below).
154
155 If you do say Y here, by default the currently visible virtual
156 terminal (/dev/tty0) will be used as system console. You can change
157 that with a kernel command line option such as "console=tty3" which
158 would use the third virtual terminal as system console. (Try "man
159 bootparam" or see the documentation of your boot loader (lilo or
160 loadlin) about how to pass options to the kernel at boot time.)
161
162 If unsure, say Y.
163
164config HW_CONSOLE
165 bool
Paul Bolle75330692011-10-12 14:25:31 +0200166 depends on VT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700167 default y
168
169comment "Unix98 PTY support"
170
171config UNIX98_PTYS
172 bool "Unix98 PTY support"
173 ---help---
174 A pseudo terminal (PTY) is a software device consisting of two
175 halves: a master and a slave. The slave device behaves identical to
176 a physical terminal; the master device is used by a process to
177 read data from and write data to the slave, thereby emulating a
178 terminal. Typical programs for the master side are telnet servers
179 and xterms.
180
181 Linux has traditionally used the BSD-like names /dev/ptyxx for
182 masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
183 has a number of problems. The GNU C library glibc 2.1 and later,
184 however, supports the Unix98 naming standard: in order to acquire a
185 pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
186 terminal is then made available to the process and the pseudo
187 terminal slave can be accessed as /dev/pts/<number>. What was
188 traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
189
190 The entries in /dev/pts/ are created on the fly by a virtual
191 file system; therefore, if you say Y here you should say Y to
192 "/dev/pts file system for Unix98 PTYs" as well.
193
194 If you want to say Y here, you need to have the C library glibc 2.1
195 or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
196 Read the instructions in <file:Documentation/Changes> pertaining to
197 pseudo terminals. It's safe to say N.
198
Linus Torvalds1da177e2005-04-16 15:20:36 -0700199source "drivers/char/pcmcia/Kconfig"
200
Paul Bollea4a77b12011-10-11 13:23:29 +0200201source "drivers/tty/serial/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202
203source "drivers/i2c/Kconfig"
204
Jean Delvaread2f9312005-07-02 18:15:49 +0200205source "drivers/hwmon/Kconfig"
206
Linus Torvalds1da177e2005-04-16 15:20:36 -0700207source "drivers/usb/Kconfig"
208
Greg Kroah-Hartman2f86c3e2008-09-17 16:34:11 +0100209source "drivers/uwb/Kconfig"
210
Linus Torvalds1da177e2005-04-16 15:20:36 -0700211endmenu
212
F. Duncan M. Haldane6e38a2b2008-11-07 18:17:51 -0500213source "drivers/staging/Kconfig"
214
Linus Torvalds1da177e2005-04-16 15:20:36 -0700215source "fs/Kconfig"
216
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217source "arch/h8300/Kconfig.debug"
218
219source "security/Kconfig"
220
221source "crypto/Kconfig"
222
223source "lib/Kconfig"