blob: 49ed557a4b661e4cfa9569b0d2af72f4375573d8 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * sata_sil.c - Silicon Image SATA
3 *
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
7 *
8 * Copyright 2003 Red Hat, Inc.
9 * Copyright 2003 Benjamin Herrenschmidt
10 *
11 * The contents of this file are subject to the Open
12 * Software License version 1.1 that can be found at
13 * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
14 * by reference.
15 *
16 * Alternatively, the contents of this file may be used under the terms
17 * of the GNU General Public License version 2 (the "GPL") as distributed
18 * in the kernel source COPYING file, in which case the provisions of
19 * the GPL are applicable instead of the above. If you wish to allow
20 * the use of your version of this file only under the terms of the
21 * GPL and not to allow others to use your version of this file under
22 * the OSL, indicate your decision by deleting the provisions above and
23 * replace them with the notice and other provisions required by the GPL.
24 * If you do not delete the provisions above, a recipient may use your
25 * version of this file under either the OSL or the GPL.
26 *
27 */
28
29#include <linux/kernel.h>
30#include <linux/module.h>
31#include <linux/pci.h>
32#include <linux/init.h>
33#include <linux/blkdev.h>
34#include <linux/delay.h>
35#include <linux/interrupt.h>
36#include "scsi.h"
37#include <scsi/scsi_host.h>
38#include <linux/libata.h>
39
40#define DRV_NAME "sata_sil"
41#define DRV_VERSION "0.9"
42
43enum {
44 sil_3112 = 0,
45 sil_3114 = 1,
46
47 SIL_FIFO_R0 = 0x40,
48 SIL_FIFO_W0 = 0x41,
49 SIL_FIFO_R1 = 0x44,
50 SIL_FIFO_W1 = 0x45,
51 SIL_FIFO_R2 = 0x240,
52 SIL_FIFO_W2 = 0x241,
53 SIL_FIFO_R3 = 0x244,
54 SIL_FIFO_W3 = 0x245,
55
56 SIL_SYSCFG = 0x48,
57 SIL_MASK_IDE0_INT = (1 << 22),
58 SIL_MASK_IDE1_INT = (1 << 23),
59 SIL_MASK_IDE2_INT = (1 << 24),
60 SIL_MASK_IDE3_INT = (1 << 25),
61 SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT,
62 SIL_MASK_4PORT = SIL_MASK_2PORT |
63 SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT,
64
65 SIL_IDE2_BMDMA = 0x200,
66
67 SIL_INTR_STEERING = (1 << 1),
68 SIL_QUIRK_MOD15WRITE = (1 << 0),
69 SIL_QUIRK_UDMA5MAX = (1 << 1),
70};
71
72static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
73static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
74static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
75static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
76static void sil_post_set_mode (struct ata_port *ap);
77
78static struct pci_device_id sil_pci_tbl[] = {
79 { 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
80 { 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
81 { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
82 { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
83 { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
84 { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
NAKAMURA Kenta525a0992005-05-25 19:28:38 -040085 { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
Linus Torvalds1da177e2005-04-16 15:20:36 -070086 { } /* terminate list */
87};
88
89
90/* TODO firmware versions should be added - eric */
91static const struct sil_drivelist {
92 const char * product;
93 unsigned int quirk;
94} sil_blacklist [] = {
95 { "ST320012AS", SIL_QUIRK_MOD15WRITE },
96 { "ST330013AS", SIL_QUIRK_MOD15WRITE },
97 { "ST340017AS", SIL_QUIRK_MOD15WRITE },
98 { "ST360015AS", SIL_QUIRK_MOD15WRITE },
99 { "ST380013AS", SIL_QUIRK_MOD15WRITE },
100 { "ST380023AS", SIL_QUIRK_MOD15WRITE },
101 { "ST3120023AS", SIL_QUIRK_MOD15WRITE },
102 { "ST3160023AS", SIL_QUIRK_MOD15WRITE },
103 { "ST3120026AS", SIL_QUIRK_MOD15WRITE },
104 { "ST3200822AS", SIL_QUIRK_MOD15WRITE },
105 { "ST340014ASL", SIL_QUIRK_MOD15WRITE },
106 { "ST360014ASL", SIL_QUIRK_MOD15WRITE },
107 { "ST380011ASL", SIL_QUIRK_MOD15WRITE },
108 { "ST3120022ASL", SIL_QUIRK_MOD15WRITE },
109 { "ST3160021ASL", SIL_QUIRK_MOD15WRITE },
110 { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX },
111 { }
112};
113
114static struct pci_driver sil_pci_driver = {
115 .name = DRV_NAME,
116 .id_table = sil_pci_tbl,
117 .probe = sil_init_one,
118 .remove = ata_pci_remove_one,
119};
120
121static Scsi_Host_Template sil_sht = {
122 .module = THIS_MODULE,
123 .name = DRV_NAME,
124 .ioctl = ata_scsi_ioctl,
125 .queuecommand = ata_scsi_queuecmd,
126 .eh_strategy_handler = ata_scsi_error,
127 .can_queue = ATA_DEF_QUEUE,
128 .this_id = ATA_SHT_THIS_ID,
129 .sg_tablesize = LIBATA_MAX_PRD,
130 .max_sectors = ATA_MAX_SECTORS,
131 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
132 .emulated = ATA_SHT_EMULATED,
133 .use_clustering = ATA_SHT_USE_CLUSTERING,
134 .proc_name = DRV_NAME,
135 .dma_boundary = ATA_DMA_BOUNDARY,
136 .slave_configure = ata_scsi_slave_config,
137 .bios_param = ata_std_bios_param,
138 .ordered_flush = 1,
139};
140
141static struct ata_port_operations sil_ops = {
142 .port_disable = ata_port_disable,
143 .dev_config = sil_dev_config,
144 .tf_load = ata_tf_load,
145 .tf_read = ata_tf_read,
146 .check_status = ata_check_status,
147 .exec_command = ata_exec_command,
148 .dev_select = ata_std_dev_select,
149 .phy_reset = sata_phy_reset,
150 .post_set_mode = sil_post_set_mode,
151 .bmdma_setup = ata_bmdma_setup,
152 .bmdma_start = ata_bmdma_start,
153 .bmdma_stop = ata_bmdma_stop,
154 .bmdma_status = ata_bmdma_status,
155 .qc_prep = ata_qc_prep,
156 .qc_issue = ata_qc_issue_prot,
157 .eng_timeout = ata_eng_timeout,
158 .irq_handler = ata_interrupt,
159 .irq_clear = ata_bmdma_irq_clear,
160 .scr_read = sil_scr_read,
161 .scr_write = sil_scr_write,
162 .port_start = ata_port_start,
163 .port_stop = ata_port_stop,
Jeff Garzikaa8f0dc2005-05-26 21:54:27 -0400164 .host_stop = ata_host_stop,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165};
166
167static struct ata_port_info sil_port_info[] = {
168 /* sil_3112 */
169 {
170 .sht = &sil_sht,
171 .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
172 ATA_FLAG_SRST | ATA_FLAG_MMIO,
173 .pio_mask = 0x1f, /* pio0-4 */
174 .mwdma_mask = 0x07, /* mwdma0-2 */
175 .udma_mask = 0x3f, /* udma0-5 */
176 .port_ops = &sil_ops,
177 }, /* sil_3114 */
178 {
179 .sht = &sil_sht,
180 .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
181 ATA_FLAG_SRST | ATA_FLAG_MMIO,
182 .pio_mask = 0x1f, /* pio0-4 */
183 .mwdma_mask = 0x07, /* mwdma0-2 */
184 .udma_mask = 0x3f, /* udma0-5 */
185 .port_ops = &sil_ops,
186 },
187};
188
189/* per-port register offsets */
190/* TODO: we can probably calculate rather than use a table */
191static const struct {
192 unsigned long tf; /* ATA taskfile register block */
193 unsigned long ctl; /* ATA control/altstatus register block */
194 unsigned long bmdma; /* DMA register block */
195 unsigned long scr; /* SATA control register block */
196 unsigned long sien; /* SATA Interrupt Enable register */
197 unsigned long xfer_mode;/* data transfer mode register */
198} sil_port[] = {
199 /* port 0 ... */
200 { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
201 { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
202 { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
203 { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
204 /* ... port 3 */
205};
206
207MODULE_AUTHOR("Jeff Garzik");
208MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller");
209MODULE_LICENSE("GPL");
210MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
211MODULE_VERSION(DRV_VERSION);
212
213static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
214{
215 u8 cache_line = 0;
216 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line);
217 return cache_line;
218}
219
220static void sil_post_set_mode (struct ata_port *ap)
221{
222 struct ata_host_set *host_set = ap->host_set;
223 struct ata_device *dev;
224 void *addr = host_set->mmio_base + sil_port[ap->port_no].xfer_mode;
225 u32 tmp, dev_mode[2];
226 unsigned int i;
227
228 for (i = 0; i < 2; i++) {
229 dev = &ap->device[i];
230 if (!ata_dev_present(dev))
231 dev_mode[i] = 0; /* PIO0/1/2 */
232 else if (dev->flags & ATA_DFLAG_PIO)
233 dev_mode[i] = 1; /* PIO3/4 */
234 else
235 dev_mode[i] = 3; /* UDMA */
236 /* value 2 indicates MDMA */
237 }
238
239 tmp = readl(addr);
240 tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0));
241 tmp |= dev_mode[0];
242 tmp |= (dev_mode[1] << 4);
243 writel(tmp, addr);
244 readl(addr); /* flush */
245}
246
247static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
248{
249 unsigned long offset = ap->ioaddr.scr_addr;
250
251 switch (sc_reg) {
252 case SCR_STATUS:
253 return offset + 4;
254 case SCR_ERROR:
255 return offset + 8;
256 case SCR_CONTROL:
257 return offset;
258 default:
259 /* do nothing */
260 break;
261 }
262
263 return 0;
264}
265
266static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg)
267{
268 void *mmio = (void *) sil_scr_addr(ap, sc_reg);
269 if (mmio)
270 return readl(mmio);
271 return 0xffffffffU;
272}
273
274static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
275{
276 void *mmio = (void *) sil_scr_addr(ap, sc_reg);
277 if (mmio)
278 writel(val, mmio);
279}
280
281/**
282 * sil_dev_config - Apply device/host-specific errata fixups
283 * @ap: Port containing device to be examined
284 * @dev: Device to be examined
285 *
286 * After the IDENTIFY [PACKET] DEVICE step is complete, and a
287 * device is known to be present, this function is called.
288 * We apply two errata fixups which are specific to Silicon Image,
289 * a Seagate and a Maxtor fixup.
290 *
291 * For certain Seagate devices, we must limit the maximum sectors
292 * to under 8K.
293 *
294 * For certain Maxtor devices, we must not program the drive
295 * beyond udma5.
296 *
297 * Both fixups are unfairly pessimistic. As soon as I get more
298 * information on these errata, I will create a more exhaustive
299 * list, and apply the fixups to only the specific
300 * devices/hosts/firmwares that need it.
301 *
302 * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted
303 * The Maxtor quirk is in the blacklist, but I'm keeping the original
304 * pessimistic fix for the following reasons...
305 * - There seems to be less info on it, only one device gleaned off the
306 * Windows driver, maybe only one is affected. More info would be greatly
307 * appreciated.
308 * - But then again UDMA5 is hardly anything to complain about
309 */
310static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
311{
312 unsigned int n, quirks = 0;
313 unsigned char model_num[40];
314 const char *s;
315 unsigned int len;
316
317 ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
318 sizeof(model_num));
319 s = &model_num[0];
320 len = strnlen(s, sizeof(model_num));
321
322 /* ATAPI specifies that empty space is blank-filled; remove blanks */
323 while ((len > 0) && (s[len - 1] == ' '))
324 len--;
325
326 for (n = 0; sil_blacklist[n].product; n++)
327 if (!memcmp(sil_blacklist[n].product, s,
328 strlen(sil_blacklist[n].product))) {
329 quirks = sil_blacklist[n].quirk;
330 break;
331 }
332
333 /* limit requests to 15 sectors */
334 if (quirks & SIL_QUIRK_MOD15WRITE) {
335 printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n",
336 ap->id, dev->devno);
337 ap->host->max_sectors = 15;
338 ap->host->hostt->max_sectors = 15;
339 dev->flags |= ATA_DFLAG_LOCK_SECTORS;
340 return;
341 }
342
343 /* limit to udma5 */
344 if (quirks & SIL_QUIRK_UDMA5MAX) {
345 printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n",
346 ap->id, dev->devno, s);
347 ap->udma_mask &= ATA_UDMA5;
348 return;
349 }
350}
351
352static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
353{
354 static int printed_version;
355 struct ata_probe_ent *probe_ent = NULL;
356 unsigned long base;
357 void *mmio_base;
358 int rc;
359 unsigned int i;
360 int pci_dev_busy = 0;
361 u32 tmp, irq_mask;
362 u8 cls;
363
364 if (!printed_version++)
365 printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
366
367 /*
368 * If this driver happens to only be useful on Apple's K2, then
369 * we should check that here as it has a normal Serverworks ID
370 */
371 rc = pci_enable_device(pdev);
372 if (rc)
373 return rc;
374
375 rc = pci_request_regions(pdev, DRV_NAME);
376 if (rc) {
377 pci_dev_busy = 1;
378 goto err_out;
379 }
380
381 rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
382 if (rc)
383 goto err_out_regions;
384 rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
385 if (rc)
386 goto err_out_regions;
387
388 probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
389 if (probe_ent == NULL) {
390 rc = -ENOMEM;
391 goto err_out_regions;
392 }
393
394 memset(probe_ent, 0, sizeof(*probe_ent));
395 INIT_LIST_HEAD(&probe_ent->node);
396 probe_ent->dev = pci_dev_to_dev(pdev);
397 probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
398 probe_ent->sht = sil_port_info[ent->driver_data].sht;
399 probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
400 probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
401 probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
402 probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
403 probe_ent->irq = pdev->irq;
404 probe_ent->irq_flags = SA_SHIRQ;
405 probe_ent->host_flags = sil_port_info[ent->driver_data].host_flags;
406
407 mmio_base = ioremap(pci_resource_start(pdev, 5),
408 pci_resource_len(pdev, 5));
409 if (mmio_base == NULL) {
410 rc = -ENOMEM;
411 goto err_out_free_ent;
412 }
413
414 probe_ent->mmio_base = mmio_base;
415
416 base = (unsigned long) mmio_base;
417
418 for (i = 0; i < probe_ent->n_ports; i++) {
419 probe_ent->port[i].cmd_addr = base + sil_port[i].tf;
420 probe_ent->port[i].altstatus_addr =
421 probe_ent->port[i].ctl_addr = base + sil_port[i].ctl;
422 probe_ent->port[i].bmdma_addr = base + sil_port[i].bmdma;
423 probe_ent->port[i].scr_addr = base + sil_port[i].scr;
424 ata_std_ports(&probe_ent->port[i]);
425 }
426
427 /* Initialize FIFO PCI bus arbitration */
428 cls = sil_get_device_cache_line(pdev);
429 if (cls) {
430 cls >>= 3;
431 cls++; /* cls = (line_size/8)+1 */
432 writeb(cls, mmio_base + SIL_FIFO_R0);
433 writeb(cls, mmio_base + SIL_FIFO_W0);
434 writeb(cls, mmio_base + SIL_FIFO_R1);
Jens Axboee1dd23a2005-06-08 13:02:25 +0200435 writeb(cls, mmio_base + SIL_FIFO_W1);
436 if (ent->driver_data == sil_3114) {
437 writeb(cls, mmio_base + SIL_FIFO_R2);
438 writeb(cls, mmio_base + SIL_FIFO_W2);
439 writeb(cls, mmio_base + SIL_FIFO_R3);
440 writeb(cls, mmio_base + SIL_FIFO_W3);
441 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700442 } else
443 printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n",
444 pci_name(pdev));
445
446 if (ent->driver_data == sil_3114) {
447 irq_mask = SIL_MASK_4PORT;
448
449 /* flip the magic "make 4 ports work" bit */
450 tmp = readl(mmio_base + SIL_IDE2_BMDMA);
451 if ((tmp & SIL_INTR_STEERING) == 0)
452 writel(tmp | SIL_INTR_STEERING,
453 mmio_base + SIL_IDE2_BMDMA);
454
455 } else {
456 irq_mask = SIL_MASK_2PORT;
457 }
458
459 /* make sure IDE0/1/2/3 interrupts are not masked */
460 tmp = readl(mmio_base + SIL_SYSCFG);
461 if (tmp & irq_mask) {
462 tmp &= ~irq_mask;
463 writel(tmp, mmio_base + SIL_SYSCFG);
464 readl(mmio_base + SIL_SYSCFG); /* flush */
465 }
466
467 /* mask all SATA phy-related interrupts */
468 /* TODO: unmask bit 6 (SError N bit) for hotplug */
469 for (i = 0; i < probe_ent->n_ports; i++)
470 writel(0, mmio_base + sil_port[i].sien);
471
472 pci_set_master(pdev);
473
474 /* FIXME: check ata_device_add return value */
475 ata_device_add(probe_ent);
476 kfree(probe_ent);
477
478 return 0;
479
480err_out_free_ent:
481 kfree(probe_ent);
482err_out_regions:
483 pci_release_regions(pdev);
484err_out:
485 if (!pci_dev_busy)
486 pci_disable_device(pdev);
487 return rc;
488}
489
490static int __init sil_init(void)
491{
492 return pci_module_init(&sil_pci_driver);
493}
494
495static void __exit sil_exit(void)
496{
497 pci_unregister_driver(&sil_pci_driver);
498}
499
500
501module_init(sil_init);
502module_exit(sil_exit);