Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | #define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $" |
| 2 | |
| 3 | #define VERSION "3.0" |
| 4 | |
| 5 | /* |
| 6 | * Please use z8530drv-utils-3.0 with this version. |
| 7 | * ------------------ |
| 8 | * |
| 9 | * You can find a subset of the documentation in |
| 10 | * Documentation/networking/z8530drv.txt. |
| 11 | */ |
| 12 | |
| 13 | /* |
| 14 | ******************************************************************** |
| 15 | * SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 * |
| 16 | ******************************************************************** |
| 17 | |
| 18 | |
| 19 | ******************************************************************** |
| 20 | |
| 21 | Copyright (c) 1993, 2000 Joerg Reuter DL1BKE |
| 22 | |
| 23 | portions (c) 1993 Guido ten Dolle PE1NNZ |
| 24 | |
| 25 | ******************************************************************** |
| 26 | |
| 27 | The driver and the programs in the archive are UNDER CONSTRUCTION. |
| 28 | The code is likely to fail, and so your kernel could --- even |
| 29 | a whole network. |
| 30 | |
| 31 | This driver is intended for Amateur Radio use. If you are running it |
| 32 | for commercial purposes, please drop me a note. I am nosy... |
| 33 | |
| 34 | ...BUT: |
| 35 | |
| 36 | ! You m u s t recognize the appropriate legislations of your country ! |
| 37 | ! before you connect a radio to the SCC board and start to transmit or ! |
| 38 | ! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! ! |
| 39 | |
| 40 | For non-Amateur-Radio use please note that you might need a special |
| 41 | allowance/licence from the designer of the SCC Board and/or the |
| 42 | MODEM. |
| 43 | |
| 44 | This program is free software; you can redistribute it and/or modify |
| 45 | it under the terms of the (modified) GNU General Public License |
| 46 | delivered with the Linux kernel source. |
| 47 | |
| 48 | This program is distributed in the hope that it will be useful, |
| 49 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 50 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 51 | GNU General Public License for more details. |
| 52 | |
| 53 | You should find a copy of the GNU General Public License in |
| 54 | /usr/src/linux/COPYING; |
| 55 | |
| 56 | ******************************************************************** |
| 57 | |
| 58 | |
| 59 | Incomplete history of z8530drv: |
| 60 | ------------------------------- |
| 61 | |
| 62 | 1994-09-13 started to write the driver, rescued most of my own |
| 63 | code (and Hans Alblas' memory buffer pool concept) from |
| 64 | an earlier project "sccdrv" which was initiated by |
| 65 | Guido ten Dolle. Not much of the old driver survived, |
| 66 | though. The first version I put my hands on was sccdrv1.3 |
| 67 | from August 1993. The memory buffer pool concept |
| 68 | appeared in an unauthorized sccdrv version (1.5) from |
| 69 | August 1994. |
| 70 | |
| 71 | 1995-01-31 changed copyright notice to GPL without limitations. |
| 72 | |
| 73 | . |
| 74 | . <SNIP> |
| 75 | . |
| 76 | |
| 77 | 1996-10-05 New semester, new driver... |
| 78 | |
| 79 | * KISS TNC emulator removed (TTY driver) |
| 80 | * Source moved to drivers/net/ |
| 81 | * Includes Z8530 defines from drivers/net/z8530.h |
| 82 | * Uses sk_buffer memory management |
| 83 | * Reduced overhead of /proc/net/z8530drv output |
| 84 | * Streamlined quite a lot things |
| 85 | * Invents brand new bugs... ;-) |
| 86 | |
| 87 | The move to version number 3.0 reflects theses changes. |
| 88 | You can use 'kissbridge' if you need a KISS TNC emulator. |
| 89 | |
| 90 | 1996-12-13 Fixed for Linux networking changes. (G4KLX) |
| 91 | 1997-01-08 Fixed the remaining problems. |
| 92 | 1997-04-02 Hopefully fixed the problems with the new *_timer() |
| 93 | routines, added calibration code. |
| 94 | 1997-10-12 Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO |
| 95 | 1998-01-29 Small fix to avoid lock-up on initialization |
| 96 | 1998-09-29 Fixed the "grouping" bugs, tx_inhibit works again, |
| 97 | using dev->tx_queue_len now instead of MAXQUEUE now. |
| 98 | 1998-10-21 Postponed the spinlock changes, would need a lot of |
| 99 | testing I currently don't have the time to. Softdcd doesn't |
| 100 | work. |
| 101 | 1998-11-04 Softdcd does not work correctly in DPLL mode, in fact it |
| 102 | never did. The DPLL locks on noise, the SYNC unit sees |
| 103 | flags that aren't... Restarting the DPLL does not help |
| 104 | either, it resynchronizes too slow and the first received |
| 105 | frame gets lost. |
| 106 | 2000-02-13 Fixed for new network driver interface changes, still |
| 107 | does TX timeouts itself since it uses its own queue |
| 108 | scheme. |
| 109 | |
| 110 | Thanks to all who contributed to this driver with ideas and bug |
| 111 | reports! |
| 112 | |
| 113 | NB -- if you find errors, change something, please let me know |
| 114 | first before you distribute it... And please don't touch |
| 115 | the version number. Just replace my callsign in |
| 116 | "v3.0.dl1bke" with your own. Just to avoid confusion... |
| 117 | |
| 118 | If you want to add your modification to the linux distribution |
| 119 | please (!) contact me first. |
| 120 | |
| 121 | New versions of the driver will be announced on the linux-hams |
| 122 | mailing list on vger.kernel.org. To subscribe send an e-mail |
| 123 | to majordomo@vger.kernel.org with the following line in |
| 124 | the body of the mail: |
| 125 | |
| 126 | subscribe linux-hams |
| 127 | |
| 128 | The content of the "Subject" field will be ignored. |
| 129 | |
| 130 | vy 73, |
| 131 | Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org |
| 132 | AX-25 : DL1BKE @ DB0ABH.#BAY.DEU.EU |
| 133 | Internet: jreuter@yaina.de |
| 134 | www : http://yaina.de/jreuter |
| 135 | */ |
| 136 | |
| 137 | /* ----------------------------------------------------------------------- */ |
| 138 | |
| 139 | #undef SCC_LDELAY /* slow it even a bit more down */ |
| 140 | #undef SCC_DONT_CHECK /* don't look if the SCCs you specified are available */ |
| 141 | |
| 142 | #define SCC_MAXCHIPS 4 /* number of max. supported chips */ |
| 143 | #define SCC_BUFSIZE 384 /* must not exceed 4096 */ |
| 144 | #undef SCC_DEBUG |
| 145 | |
| 146 | #define SCC_DEFAULT_CLOCK 4915200 |
| 147 | /* default pclock if nothing is specified */ |
| 148 | |
| 149 | /* ----------------------------------------------------------------------- */ |
| 150 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 151 | #include <linux/module.h> |
| 152 | #include <linux/errno.h> |
| 153 | #include <linux/signal.h> |
| 154 | #include <linux/timer.h> |
| 155 | #include <linux/interrupt.h> |
| 156 | #include <linux/ioport.h> |
| 157 | #include <linux/string.h> |
| 158 | #include <linux/in.h> |
| 159 | #include <linux/fcntl.h> |
| 160 | #include <linux/ptrace.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 161 | #include <linux/delay.h> |
| 162 | #include <linux/skbuff.h> |
| 163 | #include <linux/netdevice.h> |
| 164 | #include <linux/rtnetlink.h> |
| 165 | #include <linux/if_ether.h> |
| 166 | #include <linux/if_arp.h> |
| 167 | #include <linux/socket.h> |
| 168 | #include <linux/init.h> |
| 169 | #include <linux/scc.h> |
| 170 | #include <linux/ctype.h> |
| 171 | #include <linux/kernel.h> |
| 172 | #include <linux/proc_fs.h> |
| 173 | #include <linux/seq_file.h> |
| 174 | #include <linux/bitops.h> |
| 175 | |
Eric W. Biederman | 457c4cb | 2007-09-12 12:01:34 +0200 | [diff] [blame] | 176 | #include <net/net_namespace.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 177 | #include <net/ax25.h> |
| 178 | |
| 179 | #include <asm/irq.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 180 | #include <asm/io.h> |
| 181 | #include <asm/uaccess.h> |
| 182 | |
| 183 | #include "z8530.h" |
| 184 | |
Andi Kleen | afa8c78 | 2012-10-04 17:11:58 -0700 | [diff] [blame^] | 185 | static const char banner[] __initconst = KERN_INFO \ |
Hannes Eder | eb33ae2 | 2009-02-14 11:33:21 +0000 | [diff] [blame] | 186 | "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n"; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 187 | |
| 188 | static void t_dwait(unsigned long); |
| 189 | static void t_txdelay(unsigned long); |
| 190 | static void t_tail(unsigned long); |
| 191 | static void t_busy(unsigned long); |
| 192 | static void t_maxkeyup(unsigned long); |
| 193 | static void t_idle(unsigned long); |
| 194 | static void scc_tx_done(struct scc_channel *); |
| 195 | static void scc_start_tx_timer(struct scc_channel *, void (*)(unsigned long), unsigned long); |
| 196 | static void scc_start_maxkeyup(struct scc_channel *); |
| 197 | static void scc_start_defer(struct scc_channel *); |
| 198 | |
| 199 | static void z8530_init(void); |
| 200 | |
| 201 | static void init_channel(struct scc_channel *scc); |
| 202 | static void scc_key_trx (struct scc_channel *scc, char tx); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 203 | static void scc_init_timer(struct scc_channel *scc); |
| 204 | |
| 205 | static int scc_net_alloc(const char *name, struct scc_channel *scc); |
| 206 | static void scc_net_setup(struct net_device *dev); |
| 207 | static int scc_net_open(struct net_device *dev); |
| 208 | static int scc_net_close(struct net_device *dev); |
| 209 | static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb); |
Stephen Hemminger | 36e4d64 | 2009-08-31 19:50:43 +0000 | [diff] [blame] | 210 | static netdev_tx_t scc_net_tx(struct sk_buff *skb, |
| 211 | struct net_device *dev); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 212 | static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); |
| 213 | static int scc_net_set_mac_address(struct net_device *dev, void *addr); |
| 214 | static struct net_device_stats * scc_net_get_stats(struct net_device *dev); |
| 215 | |
| 216 | static unsigned char SCC_DriverName[] = "scc"; |
| 217 | |
| 218 | static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS]; |
| 219 | |
| 220 | static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS]; /* information per channel */ |
| 221 | |
| 222 | static struct scc_ctrl { |
| 223 | io_port chan_A; |
| 224 | io_port chan_B; |
| 225 | int irq; |
| 226 | } SCC_ctrl[SCC_MAXCHIPS+1]; |
| 227 | |
| 228 | static unsigned char Driver_Initialized; |
| 229 | static int Nchips; |
| 230 | static io_port Vector_Latch; |
| 231 | |
| 232 | |
| 233 | /* ******************************************************************** */ |
| 234 | /* * Port Access Functions * */ |
| 235 | /* ******************************************************************** */ |
| 236 | |
| 237 | /* These provide interrupt save 2-step access to the Z8530 registers */ |
| 238 | |
| 239 | static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */ |
| 240 | |
| 241 | static inline unsigned char InReg(io_port port, unsigned char reg) |
| 242 | { |
| 243 | unsigned long flags; |
| 244 | unsigned char r; |
| 245 | |
| 246 | spin_lock_irqsave(&iolock, flags); |
| 247 | #ifdef SCC_LDELAY |
| 248 | Outb(port, reg); |
| 249 | udelay(SCC_LDELAY); |
| 250 | r=Inb(port); |
| 251 | udelay(SCC_LDELAY); |
| 252 | #else |
| 253 | Outb(port, reg); |
| 254 | r=Inb(port); |
| 255 | #endif |
| 256 | spin_unlock_irqrestore(&iolock, flags); |
| 257 | return r; |
| 258 | } |
| 259 | |
| 260 | static inline void OutReg(io_port port, unsigned char reg, unsigned char val) |
| 261 | { |
| 262 | unsigned long flags; |
| 263 | |
| 264 | spin_lock_irqsave(&iolock, flags); |
| 265 | #ifdef SCC_LDELAY |
| 266 | Outb(port, reg); udelay(SCC_LDELAY); |
| 267 | Outb(port, val); udelay(SCC_LDELAY); |
| 268 | #else |
| 269 | Outb(port, reg); |
| 270 | Outb(port, val); |
| 271 | #endif |
| 272 | spin_unlock_irqrestore(&iolock, flags); |
| 273 | } |
| 274 | |
| 275 | static inline void wr(struct scc_channel *scc, unsigned char reg, |
| 276 | unsigned char val) |
| 277 | { |
| 278 | OutReg(scc->ctrl, reg, (scc->wreg[reg] = val)); |
| 279 | } |
| 280 | |
| 281 | static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val) |
| 282 | { |
| 283 | OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val)); |
| 284 | } |
| 285 | |
| 286 | static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val) |
| 287 | { |
| 288 | OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val)); |
| 289 | } |
| 290 | |
| 291 | /* ******************************************************************** */ |
| 292 | /* * Some useful macros * */ |
| 293 | /* ******************************************************************** */ |
| 294 | |
| 295 | static inline void scc_discard_buffers(struct scc_channel *scc) |
| 296 | { |
| 297 | unsigned long flags; |
| 298 | |
| 299 | spin_lock_irqsave(&scc->lock, flags); |
| 300 | if (scc->tx_buff != NULL) |
| 301 | { |
| 302 | dev_kfree_skb(scc->tx_buff); |
| 303 | scc->tx_buff = NULL; |
| 304 | } |
| 305 | |
David S. Miller | b03efcf | 2005-07-08 14:57:23 -0700 | [diff] [blame] | 306 | while (!skb_queue_empty(&scc->tx_queue)) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 307 | dev_kfree_skb(skb_dequeue(&scc->tx_queue)); |
| 308 | |
| 309 | spin_unlock_irqrestore(&scc->lock, flags); |
| 310 | } |
| 311 | |
| 312 | |
| 313 | |
| 314 | /* ******************************************************************** */ |
| 315 | /* * Interrupt Service Routines * */ |
| 316 | /* ******************************************************************** */ |
| 317 | |
| 318 | |
| 319 | /* ----> subroutines for the interrupt handlers <---- */ |
| 320 | |
| 321 | static inline void scc_notify(struct scc_channel *scc, int event) |
| 322 | { |
| 323 | struct sk_buff *skb; |
| 324 | char *bp; |
| 325 | |
| 326 | if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA) |
| 327 | return; |
| 328 | |
| 329 | skb = dev_alloc_skb(2); |
| 330 | if (skb != NULL) |
| 331 | { |
| 332 | bp = skb_put(skb, 2); |
| 333 | *bp++ = PARAM_HWEVENT; |
| 334 | *bp++ = event; |
| 335 | scc_net_rx(scc, skb); |
| 336 | } else |
| 337 | scc->stat.nospace++; |
| 338 | } |
| 339 | |
| 340 | static inline void flush_rx_FIFO(struct scc_channel *scc) |
| 341 | { |
| 342 | int k; |
| 343 | |
| 344 | for (k=0; k<3; k++) |
| 345 | Inb(scc->data); |
| 346 | |
| 347 | if(scc->rx_buff != NULL) /* did we receive something? */ |
| 348 | { |
| 349 | scc->stat.rxerrs++; /* then count it as an error */ |
| 350 | dev_kfree_skb_irq(scc->rx_buff); |
| 351 | scc->rx_buff = NULL; |
| 352 | } |
| 353 | } |
| 354 | |
| 355 | static void start_hunt(struct scc_channel *scc) |
| 356 | { |
| 357 | if ((scc->modem.clocksrc != CLK_EXTERNAL)) |
| 358 | OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ |
| 359 | or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */ |
| 360 | } |
| 361 | |
| 362 | /* ----> four different interrupt handlers for Tx, Rx, changing of */ |
| 363 | /* DCD/CTS and Rx/Tx errors */ |
| 364 | |
| 365 | /* Transmitter interrupt handler */ |
| 366 | static inline void scc_txint(struct scc_channel *scc) |
| 367 | { |
| 368 | struct sk_buff *skb; |
| 369 | |
| 370 | scc->stat.txints++; |
| 371 | skb = scc->tx_buff; |
| 372 | |
| 373 | /* send first octet */ |
| 374 | |
| 375 | if (skb == NULL) |
| 376 | { |
| 377 | skb = skb_dequeue(&scc->tx_queue); |
| 378 | scc->tx_buff = skb; |
| 379 | netif_wake_queue(scc->dev); |
| 380 | |
| 381 | if (skb == NULL) |
| 382 | { |
| 383 | scc_tx_done(scc); |
| 384 | Outb(scc->ctrl, RES_Tx_P); |
| 385 | return; |
| 386 | } |
| 387 | |
| 388 | if (skb->len == 0) /* Paranoia... */ |
| 389 | { |
| 390 | dev_kfree_skb_irq(skb); |
| 391 | scc->tx_buff = NULL; |
| 392 | scc_tx_done(scc); |
| 393 | Outb(scc->ctrl, RES_Tx_P); |
| 394 | return; |
| 395 | } |
| 396 | |
| 397 | scc->stat.tx_state = TXS_ACTIVE; |
| 398 | |
| 399 | OutReg(scc->ctrl, R0, RES_Tx_CRC); |
| 400 | /* reset CRC generator */ |
| 401 | or(scc,R10,ABUNDER); /* re-install underrun protection */ |
| 402 | Outb(scc->data,*skb->data); /* send byte */ |
| 403 | skb_pull(skb, 1); |
| 404 | |
| 405 | if (!scc->enhanced) /* reset EOM latch */ |
| 406 | Outb(scc->ctrl,RES_EOM_L); |
| 407 | return; |
| 408 | } |
| 409 | |
| 410 | /* End Of Frame... */ |
| 411 | |
| 412 | if (skb->len == 0) |
| 413 | { |
| 414 | Outb(scc->ctrl, RES_Tx_P); /* reset pending int */ |
| 415 | cl(scc, R10, ABUNDER); /* send CRC */ |
| 416 | dev_kfree_skb_irq(skb); |
| 417 | scc->tx_buff = NULL; |
| 418 | scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */ |
| 419 | return; |
| 420 | } |
| 421 | |
| 422 | /* send octet */ |
| 423 | |
| 424 | Outb(scc->data,*skb->data); |
| 425 | skb_pull(skb, 1); |
| 426 | } |
| 427 | |
| 428 | |
| 429 | /* External/Status interrupt handler */ |
| 430 | static inline void scc_exint(struct scc_channel *scc) |
| 431 | { |
| 432 | unsigned char status,changes,chg_and_stat; |
| 433 | |
| 434 | scc->stat.exints++; |
| 435 | |
| 436 | status = InReg(scc->ctrl,R0); |
| 437 | changes = status ^ scc->status; |
| 438 | chg_and_stat = changes & status; |
| 439 | |
| 440 | /* ABORT: generated whenever DCD drops while receiving */ |
| 441 | |
| 442 | if (chg_and_stat & BRK_ABRT) /* Received an ABORT */ |
| 443 | flush_rx_FIFO(scc); |
| 444 | |
| 445 | /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */ |
| 446 | |
| 447 | if ((changes & SYNC_HUNT) && scc->kiss.softdcd) |
| 448 | { |
| 449 | if (status & SYNC_HUNT) |
| 450 | { |
| 451 | scc->dcd = 0; |
| 452 | flush_rx_FIFO(scc); |
| 453 | if ((scc->modem.clocksrc != CLK_EXTERNAL)) |
| 454 | OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ |
| 455 | } else { |
| 456 | scc->dcd = 1; |
| 457 | } |
| 458 | |
| 459 | scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON); |
| 460 | } |
| 461 | |
| 462 | /* DCD: on = start to receive packet, off = ABORT condition */ |
| 463 | /* (a successfully received packet generates a special condition int) */ |
| 464 | |
| 465 | if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */ |
| 466 | { |
| 467 | if(status & DCD) /* DCD is now ON */ |
| 468 | { |
| 469 | start_hunt(scc); |
| 470 | scc->dcd = 1; |
| 471 | } else { /* DCD is now OFF */ |
| 472 | cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */ |
| 473 | flush_rx_FIFO(scc); |
| 474 | scc->dcd = 0; |
| 475 | } |
| 476 | |
| 477 | scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); |
| 478 | } |
| 479 | |
| 480 | #ifdef notdef |
| 481 | /* CTS: use external TxDelay (what's that good for?!) |
| 482 | * Anyway: If we _could_ use it (BayCom USCC uses CTS for |
| 483 | * own purposes) we _should_ use the "autoenable" feature |
| 484 | * of the Z8530 and not this interrupt... |
| 485 | */ |
| 486 | |
| 487 | if (chg_and_stat & CTS) /* CTS is now ON */ |
| 488 | { |
| 489 | if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */ |
| 490 | scc_start_tx_timer(scc, t_txdelay, 0); |
| 491 | } |
| 492 | #endif |
| 493 | |
| 494 | if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM)) |
| 495 | { |
| 496 | scc->stat.tx_under++; /* oops, an underrun! count 'em */ |
| 497 | Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */ |
| 498 | |
| 499 | if (scc->tx_buff != NULL) |
| 500 | { |
| 501 | dev_kfree_skb_irq(scc->tx_buff); |
| 502 | scc->tx_buff = NULL; |
| 503 | } |
| 504 | |
| 505 | or(scc,R10,ABUNDER); |
| 506 | scc_start_tx_timer(scc, t_txdelay, 0); /* restart transmission */ |
| 507 | } |
| 508 | |
| 509 | scc->status = status; |
| 510 | Outb(scc->ctrl,RES_EXT_INT); |
| 511 | } |
| 512 | |
| 513 | |
| 514 | /* Receiver interrupt handler */ |
| 515 | static inline void scc_rxint(struct scc_channel *scc) |
| 516 | { |
| 517 | struct sk_buff *skb; |
| 518 | |
| 519 | scc->stat.rxints++; |
| 520 | |
| 521 | if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF) |
| 522 | { |
| 523 | Inb(scc->data); /* discard char */ |
| 524 | or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ |
| 525 | return; |
| 526 | } |
| 527 | |
| 528 | skb = scc->rx_buff; |
| 529 | |
| 530 | if (skb == NULL) |
| 531 | { |
| 532 | skb = dev_alloc_skb(scc->stat.bufsize); |
| 533 | if (skb == NULL) |
| 534 | { |
| 535 | scc->dev_stat.rx_dropped++; |
| 536 | scc->stat.nospace++; |
| 537 | Inb(scc->data); |
| 538 | or(scc, R3, ENT_HM); |
| 539 | return; |
| 540 | } |
| 541 | |
| 542 | scc->rx_buff = skb; |
| 543 | *(skb_put(skb, 1)) = 0; /* KISS data */ |
| 544 | } |
| 545 | |
| 546 | if (skb->len >= scc->stat.bufsize) |
| 547 | { |
| 548 | #ifdef notdef |
| 549 | printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n"); |
| 550 | #endif |
| 551 | dev_kfree_skb_irq(skb); |
| 552 | scc->rx_buff = NULL; |
| 553 | Inb(scc->data); |
| 554 | or(scc, R3, ENT_HM); |
| 555 | return; |
| 556 | } |
| 557 | |
| 558 | *(skb_put(skb, 1)) = Inb(scc->data); |
| 559 | } |
| 560 | |
| 561 | |
| 562 | /* Receive Special Condition interrupt handler */ |
| 563 | static inline void scc_spint(struct scc_channel *scc) |
| 564 | { |
| 565 | unsigned char status; |
| 566 | struct sk_buff *skb; |
| 567 | |
| 568 | scc->stat.spints++; |
| 569 | |
| 570 | status = InReg(scc->ctrl,R1); /* read receiver status */ |
| 571 | |
| 572 | Inb(scc->data); /* throw away Rx byte */ |
| 573 | skb = scc->rx_buff; |
| 574 | |
| 575 | if(status & Rx_OVR) /* receiver overrun */ |
| 576 | { |
| 577 | scc->stat.rx_over++; /* count them */ |
| 578 | or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ |
| 579 | |
| 580 | if (skb != NULL) |
| 581 | dev_kfree_skb_irq(skb); |
| 582 | scc->rx_buff = skb = NULL; |
| 583 | } |
| 584 | |
| 585 | if(status & END_FR && skb != NULL) /* end of frame */ |
| 586 | { |
| 587 | /* CRC okay, frame ends on 8 bit boundary and received something ? */ |
| 588 | |
| 589 | if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0) |
| 590 | { |
| 591 | /* ignore last received byte (first of the CRC bytes) */ |
| 592 | skb_trim(skb, skb->len-1); |
| 593 | scc_net_rx(scc, skb); |
| 594 | scc->rx_buff = NULL; |
| 595 | scc->stat.rxframes++; |
| 596 | } else { /* a bad frame */ |
| 597 | dev_kfree_skb_irq(skb); |
| 598 | scc->rx_buff = NULL; |
| 599 | scc->stat.rxerrs++; |
| 600 | } |
| 601 | } |
| 602 | |
| 603 | Outb(scc->ctrl,ERR_RES); |
| 604 | } |
| 605 | |
| 606 | |
| 607 | /* ----> interrupt service routine for the Z8530 <---- */ |
| 608 | |
| 609 | static void scc_isr_dispatch(struct scc_channel *scc, int vector) |
| 610 | { |
| 611 | spin_lock(&scc->lock); |
| 612 | switch (vector & VECTOR_MASK) |
| 613 | { |
| 614 | case TXINT: scc_txint(scc); break; |
| 615 | case EXINT: scc_exint(scc); break; |
| 616 | case RXINT: scc_rxint(scc); break; |
| 617 | case SPINT: scc_spint(scc); break; |
| 618 | } |
| 619 | spin_unlock(&scc->lock); |
| 620 | } |
| 621 | |
| 622 | /* If the card has a latch for the interrupt vector (like the PA0HZP card) |
| 623 | use it to get the number of the chip that generated the int. |
| 624 | If not: poll all defined chips. |
| 625 | */ |
| 626 | |
| 627 | #define SCC_IRQTIMEOUT 30000 |
| 628 | |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 629 | static irqreturn_t scc_isr(int irq, void *dev_id) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 630 | { |
Jeff Garzik | 1b36efe | 2007-10-29 05:20:44 -0400 | [diff] [blame] | 631 | int chip_irq = (long) dev_id; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 632 | unsigned char vector; |
| 633 | struct scc_channel *scc; |
| 634 | struct scc_ctrl *ctrl; |
| 635 | int k; |
| 636 | |
| 637 | if (Vector_Latch) |
| 638 | { |
| 639 | for(k=0; k < SCC_IRQTIMEOUT; k++) |
| 640 | { |
| 641 | Outb(Vector_Latch, 0); /* Generate INTACK */ |
| 642 | |
| 643 | /* Read the vector */ |
| 644 | if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break; |
| 645 | if (vector & 0x01) break; |
| 646 | |
| 647 | scc=&SCC_Info[vector >> 3 ^ 0x01]; |
| 648 | if (!scc->dev) break; |
| 649 | |
| 650 | scc_isr_dispatch(scc, vector); |
| 651 | |
| 652 | OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */ |
| 653 | } |
| 654 | |
| 655 | if (k == SCC_IRQTIMEOUT) |
| 656 | printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n"); |
| 657 | |
| 658 | return IRQ_HANDLED; |
| 659 | } |
| 660 | |
| 661 | /* Find the SCC generating the interrupt by polling all attached SCCs |
| 662 | * reading RR3A (the interrupt pending register) |
| 663 | */ |
| 664 | |
| 665 | ctrl = SCC_ctrl; |
| 666 | while (ctrl->chan_A) |
| 667 | { |
Jeff Garzik | 1b36efe | 2007-10-29 05:20:44 -0400 | [diff] [blame] | 668 | if (ctrl->irq != chip_irq) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 669 | { |
| 670 | ctrl++; |
| 671 | continue; |
| 672 | } |
| 673 | |
| 674 | scc = NULL; |
| 675 | for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++) |
| 676 | { |
| 677 | vector=InReg(ctrl->chan_B,R2); /* Read the vector */ |
| 678 | if (vector & 0x01) break; |
| 679 | |
| 680 | scc = &SCC_Info[vector >> 3 ^ 0x01]; |
| 681 | if (!scc->dev) break; |
| 682 | |
| 683 | scc_isr_dispatch(scc, vector); |
| 684 | } |
| 685 | |
| 686 | if (k == SCC_IRQTIMEOUT) |
| 687 | { |
| 688 | printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n"); |
| 689 | break; |
| 690 | } |
| 691 | |
| 692 | /* This looks weird and it is. At least the BayCom USCC doesn't |
| 693 | * use the Interrupt Daisy Chain, thus we'll have to start |
| 694 | * all over again to be sure not to miss an interrupt from |
| 695 | * (any of) the other chip(s)... |
| 696 | * Honestly, the situation *is* braindamaged... |
| 697 | */ |
| 698 | |
| 699 | if (scc != NULL) |
| 700 | { |
| 701 | OutReg(scc->ctrl,R0,RES_H_IUS); |
| 702 | ctrl = SCC_ctrl; |
| 703 | } else |
| 704 | ctrl++; |
| 705 | } |
| 706 | return IRQ_HANDLED; |
| 707 | } |
| 708 | |
| 709 | |
| 710 | |
| 711 | /* ******************************************************************** */ |
| 712 | /* * Init Channel */ |
| 713 | /* ******************************************************************** */ |
| 714 | |
| 715 | |
| 716 | /* ----> set SCC channel speed <---- */ |
| 717 | |
| 718 | static inline void set_brg(struct scc_channel *scc, unsigned int tc) |
| 719 | { |
| 720 | cl(scc,R14,BRENABL); /* disable baudrate generator */ |
| 721 | wr(scc,R12,tc & 255); /* brg rate LOW */ |
| 722 | wr(scc,R13,tc >> 8); /* brg rate HIGH */ |
| 723 | or(scc,R14,BRENABL); /* enable baudrate generator */ |
| 724 | } |
| 725 | |
| 726 | static inline void set_speed(struct scc_channel *scc) |
| 727 | { |
| 728 | unsigned long flags; |
| 729 | spin_lock_irqsave(&scc->lock, flags); |
| 730 | |
| 731 | if (scc->modem.speed > 0) /* paranoia... */ |
| 732 | set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2); |
| 733 | |
| 734 | spin_unlock_irqrestore(&scc->lock, flags); |
| 735 | } |
| 736 | |
| 737 | |
| 738 | /* ----> initialize a SCC channel <---- */ |
| 739 | |
| 740 | static inline void init_brg(struct scc_channel *scc) |
| 741 | { |
| 742 | wr(scc, R14, BRSRC); /* BRG source = PCLK */ |
| 743 | OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */ |
| 744 | OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */ |
| 745 | } |
| 746 | |
| 747 | /* |
| 748 | * Initialization according to the Z8530 manual (SGS-Thomson's version): |
| 749 | * |
| 750 | * 1. Modes and constants |
| 751 | * |
| 752 | * WR9 11000000 chip reset |
| 753 | * WR4 XXXXXXXX Tx/Rx control, async or sync mode |
| 754 | * WR1 0XX00X00 select W/REQ (optional) |
| 755 | * WR2 XXXXXXXX program interrupt vector |
| 756 | * WR3 XXXXXXX0 select Rx control |
| 757 | * WR5 XXXX0XXX select Tx control |
| 758 | * WR6 XXXXXXXX sync character |
| 759 | * WR7 XXXXXXXX sync character |
| 760 | * WR9 000X0XXX select interrupt control |
| 761 | * WR10 XXXXXXXX miscellaneous control (optional) |
| 762 | * WR11 XXXXXXXX clock control |
| 763 | * WR12 XXXXXXXX time constant lower byte (optional) |
| 764 | * WR13 XXXXXXXX time constant upper byte (optional) |
| 765 | * WR14 XXXXXXX0 miscellaneous control |
| 766 | * WR14 XXXSSSSS commands (optional) |
| 767 | * |
| 768 | * 2. Enables |
| 769 | * |
| 770 | * WR14 000SSSS1 baud rate enable |
| 771 | * WR3 SSSSSSS1 Rx enable |
| 772 | * WR5 SSSS1SSS Tx enable |
| 773 | * WR0 10000000 reset Tx CRG (optional) |
| 774 | * WR1 XSS00S00 DMA enable (optional) |
| 775 | * |
| 776 | * 3. Interrupt status |
| 777 | * |
| 778 | * WR15 XXXXXXXX enable external/status |
| 779 | * WR0 00010000 reset external status |
| 780 | * WR0 00010000 reset external status twice |
| 781 | * WR1 SSSXXSXX enable Rx, Tx and Ext/status |
| 782 | * WR9 000SXSSS enable master interrupt enable |
| 783 | * |
| 784 | * 1 = set to one, 0 = reset to zero |
| 785 | * X = user defined, S = same as previous init |
| 786 | * |
| 787 | * |
| 788 | * Note that the implementation differs in some points from above scheme. |
| 789 | * |
| 790 | */ |
| 791 | |
| 792 | static void init_channel(struct scc_channel *scc) |
| 793 | { |
| 794 | del_timer(&scc->tx_t); |
| 795 | del_timer(&scc->tx_wdog); |
| 796 | |
| 797 | disable_irq(scc->irq); |
| 798 | |
| 799 | wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */ |
| 800 | wr(scc,R1,0); /* no W/REQ operation */ |
| 801 | wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */ |
| 802 | wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */ |
| 803 | wr(scc,R6,0); /* SDLC address zero (not used) */ |
| 804 | wr(scc,R7,FLAG); /* SDLC flag value */ |
| 805 | wr(scc,R9,VIS); /* vector includes status */ |
| 806 | wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */ |
| 807 | wr(scc,R14, 0); |
| 808 | |
| 809 | |
| 810 | /* set clock sources: |
| 811 | |
| 812 | CLK_DPLL: normal halfduplex operation |
| 813 | |
| 814 | RxClk: use DPLL |
| 815 | TxClk: use DPLL |
| 816 | TRxC mode DPLL output |
| 817 | |
| 818 | CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem) |
| 819 | |
| 820 | BayCom: others: |
| 821 | |
| 822 | TxClk = pin RTxC TxClk = pin TRxC |
| 823 | RxClk = pin TRxC RxClk = pin RTxC |
| 824 | |
| 825 | |
| 826 | CLK_DIVIDER: |
| 827 | RxClk = use DPLL |
| 828 | TxClk = pin RTxC |
| 829 | |
| 830 | BayCom: others: |
| 831 | pin TRxC = DPLL pin TRxC = BRG |
| 832 | (RxClk * 1) (RxClk * 32) |
| 833 | */ |
| 834 | |
| 835 | |
| 836 | switch(scc->modem.clocksrc) |
| 837 | { |
| 838 | case CLK_DPLL: |
| 839 | wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); |
| 840 | init_brg(scc); |
| 841 | break; |
| 842 | |
| 843 | case CLK_DIVIDER: |
| 844 | wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI); |
| 845 | init_brg(scc); |
| 846 | break; |
| 847 | |
| 848 | case CLK_EXTERNAL: |
| 849 | wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP); |
| 850 | OutReg(scc->ctrl, R14, DISDPLL); |
| 851 | break; |
| 852 | |
| 853 | } |
| 854 | |
| 855 | set_speed(scc); /* set baudrate */ |
| 856 | |
| 857 | if(scc->enhanced) |
| 858 | { |
| 859 | or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */ |
| 860 | wr(scc,R7,AUTOEOM); |
| 861 | } |
| 862 | |
| 863 | if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD)) |
| 864 | /* DCD is now ON */ |
| 865 | { |
| 866 | start_hunt(scc); |
| 867 | } |
| 868 | |
| 869 | /* enable ABORT, DCD & SYNC/HUNT interrupts */ |
| 870 | |
| 871 | wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE)); |
| 872 | |
| 873 | Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ |
| 874 | Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */ |
| 875 | |
| 876 | or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */ |
| 877 | |
| 878 | scc->status = InReg(scc->ctrl,R0); /* read initial status */ |
| 879 | |
| 880 | or(scc,R9,MIE); /* master interrupt enable */ |
| 881 | |
| 882 | scc_init_timer(scc); |
| 883 | |
| 884 | enable_irq(scc->irq); |
| 885 | } |
| 886 | |
| 887 | |
| 888 | |
| 889 | |
| 890 | /* ******************************************************************** */ |
| 891 | /* * SCC timer functions * */ |
| 892 | /* ******************************************************************** */ |
| 893 | |
| 894 | |
| 895 | /* ----> scc_key_trx sets the time constant for the baudrate |
| 896 | generator and keys the transmitter <---- */ |
| 897 | |
| 898 | static void scc_key_trx(struct scc_channel *scc, char tx) |
| 899 | { |
| 900 | unsigned int time_const; |
| 901 | |
| 902 | if (scc->brand & PRIMUS) |
| 903 | Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0)); |
| 904 | |
| 905 | if (scc->modem.speed < 300) |
| 906 | scc->modem.speed = 1200; |
| 907 | |
| 908 | time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2; |
| 909 | |
| 910 | disable_irq(scc->irq); |
| 911 | |
| 912 | if (tx) |
| 913 | { |
| 914 | or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */ |
| 915 | or(scc, R15, TxUIE); |
| 916 | } |
| 917 | |
| 918 | if (scc->modem.clocksrc == CLK_DPLL) |
| 919 | { /* force simplex operation */ |
| 920 | if (tx) |
| 921 | { |
| 922 | #ifdef CONFIG_SCC_TRXECHO |
| 923 | cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */ |
| 924 | cl(scc, R15, DCDIE|SYNCIE); /* No DCD changes, please */ |
| 925 | #endif |
| 926 | set_brg(scc, time_const); /* reprogram baudrate generator */ |
| 927 | |
| 928 | /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */ |
| 929 | wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR); |
| 930 | |
| 931 | /* By popular demand: tx_inhibit */ |
| 932 | if (scc->kiss.tx_inhibit) |
| 933 | { |
| 934 | or(scc,R5, TxENAB); |
| 935 | scc->wreg[R5] |= RTS; |
| 936 | } else { |
| 937 | or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */ |
| 938 | } |
| 939 | } else { |
| 940 | cl(scc,R5,RTS|TxENAB); |
| 941 | |
| 942 | set_brg(scc, time_const); /* reprogram baudrate generator */ |
| 943 | |
| 944 | /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */ |
| 945 | wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); |
| 946 | |
| 947 | #ifndef CONFIG_SCC_TRXECHO |
| 948 | if (scc->kiss.softdcd) |
| 949 | #endif |
| 950 | { |
| 951 | or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE); |
| 952 | start_hunt(scc); |
| 953 | } |
| 954 | } |
| 955 | } else { |
| 956 | if (tx) |
| 957 | { |
| 958 | #ifdef CONFIG_SCC_TRXECHO |
| 959 | if (scc->kiss.fulldup == KISS_DUPLEX_HALF) |
| 960 | { |
| 961 | cl(scc, R3, RxENABLE); |
| 962 | cl(scc, R15, DCDIE|SYNCIE); |
| 963 | } |
| 964 | #endif |
| 965 | |
| 966 | if (scc->kiss.tx_inhibit) |
| 967 | { |
| 968 | or(scc,R5, TxENAB); |
| 969 | scc->wreg[R5] |= RTS; |
| 970 | } else { |
| 971 | or(scc,R5,RTS|TxENAB); /* enable tx */ |
| 972 | } |
| 973 | } else { |
| 974 | cl(scc,R5,RTS|TxENAB); /* disable tx */ |
| 975 | |
| 976 | if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) && |
| 977 | #ifndef CONFIG_SCC_TRXECHO |
| 978 | scc->kiss.softdcd) |
| 979 | #else |
| 980 | 1) |
| 981 | #endif |
| 982 | { |
| 983 | or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE); |
| 984 | start_hunt(scc); |
| 985 | } |
| 986 | } |
| 987 | } |
| 988 | |
| 989 | enable_irq(scc->irq); |
| 990 | } |
| 991 | |
| 992 | |
| 993 | /* ----> SCC timer interrupt handler and friends. <---- */ |
| 994 | |
| 995 | static void __scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when) |
| 996 | { |
| 997 | del_timer(&scc->tx_t); |
| 998 | |
| 999 | if (when == 0) |
| 1000 | { |
| 1001 | handler((unsigned long) scc); |
| 1002 | } else |
| 1003 | if (when != TIMER_OFF) |
| 1004 | { |
| 1005 | scc->tx_t.data = (unsigned long) scc; |
| 1006 | scc->tx_t.function = handler; |
| 1007 | scc->tx_t.expires = jiffies + (when*HZ)/100; |
| 1008 | add_timer(&scc->tx_t); |
| 1009 | } |
| 1010 | } |
| 1011 | |
| 1012 | static void scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when) |
| 1013 | { |
| 1014 | unsigned long flags; |
| 1015 | |
| 1016 | spin_lock_irqsave(&scc->lock, flags); |
| 1017 | __scc_start_tx_timer(scc, handler, when); |
| 1018 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1019 | } |
| 1020 | |
| 1021 | static void scc_start_defer(struct scc_channel *scc) |
| 1022 | { |
| 1023 | unsigned long flags; |
| 1024 | |
| 1025 | spin_lock_irqsave(&scc->lock, flags); |
| 1026 | del_timer(&scc->tx_wdog); |
| 1027 | |
| 1028 | if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF) |
| 1029 | { |
| 1030 | scc->tx_wdog.data = (unsigned long) scc; |
| 1031 | scc->tx_wdog.function = t_busy; |
| 1032 | scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer; |
| 1033 | add_timer(&scc->tx_wdog); |
| 1034 | } |
| 1035 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1036 | } |
| 1037 | |
| 1038 | static void scc_start_maxkeyup(struct scc_channel *scc) |
| 1039 | { |
| 1040 | unsigned long flags; |
| 1041 | |
| 1042 | spin_lock_irqsave(&scc->lock, flags); |
| 1043 | del_timer(&scc->tx_wdog); |
| 1044 | |
| 1045 | if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF) |
| 1046 | { |
| 1047 | scc->tx_wdog.data = (unsigned long) scc; |
| 1048 | scc->tx_wdog.function = t_maxkeyup; |
| 1049 | scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup; |
| 1050 | add_timer(&scc->tx_wdog); |
| 1051 | } |
| 1052 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1053 | } |
| 1054 | |
| 1055 | /* |
| 1056 | * This is called from scc_txint() when there are no more frames to send. |
| 1057 | * Not exactly a timer function, but it is a close friend of the family... |
| 1058 | */ |
| 1059 | |
| 1060 | static void scc_tx_done(struct scc_channel *scc) |
| 1061 | { |
| 1062 | /* |
| 1063 | * trx remains keyed in fulldup mode 2 until t_idle expires. |
| 1064 | */ |
| 1065 | |
| 1066 | switch (scc->kiss.fulldup) |
| 1067 | { |
| 1068 | case KISS_DUPLEX_LINK: |
| 1069 | scc->stat.tx_state = TXS_IDLE2; |
| 1070 | if (scc->kiss.idletime != TIMER_OFF) |
Julia Lawall | 1f1d47e | 2010-08-05 10:28:12 +0000 | [diff] [blame] | 1071 | scc_start_tx_timer(scc, t_idle, |
| 1072 | scc->kiss.idletime*100); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1073 | break; |
| 1074 | case KISS_DUPLEX_OPTIMA: |
| 1075 | scc_notify(scc, HWEV_ALL_SENT); |
| 1076 | break; |
| 1077 | default: |
| 1078 | scc->stat.tx_state = TXS_BUSY; |
| 1079 | scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); |
| 1080 | } |
| 1081 | |
| 1082 | netif_wake_queue(scc->dev); |
| 1083 | } |
| 1084 | |
| 1085 | |
| 1086 | static unsigned char Rand = 17; |
| 1087 | |
| 1088 | static inline int is_grouped(struct scc_channel *scc) |
| 1089 | { |
| 1090 | int k; |
| 1091 | struct scc_channel *scc2; |
| 1092 | unsigned char grp1, grp2; |
| 1093 | |
| 1094 | grp1 = scc->kiss.group; |
| 1095 | |
| 1096 | for (k = 0; k < (Nchips * 2); k++) |
| 1097 | { |
| 1098 | scc2 = &SCC_Info[k]; |
| 1099 | grp2 = scc2->kiss.group; |
| 1100 | |
| 1101 | if (scc2 == scc || !(scc2->dev && grp2)) |
| 1102 | continue; |
| 1103 | |
| 1104 | if ((grp1 & 0x3f) == (grp2 & 0x3f)) |
| 1105 | { |
| 1106 | if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) ) |
| 1107 | return 1; |
| 1108 | |
| 1109 | if ( (grp1 & RXGROUP) && scc2->dcd ) |
| 1110 | return 1; |
| 1111 | } |
| 1112 | } |
| 1113 | return 0; |
| 1114 | } |
| 1115 | |
| 1116 | /* DWAIT and SLOTTIME expired |
| 1117 | * |
| 1118 | * fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer |
| 1119 | * else key trx and start txdelay |
| 1120 | * fulldup == 1: key trx and start txdelay |
| 1121 | * fulldup == 2: mintime expired, reset status or key trx and start txdelay |
| 1122 | */ |
| 1123 | |
| 1124 | static void t_dwait(unsigned long channel) |
| 1125 | { |
| 1126 | struct scc_channel *scc = (struct scc_channel *) channel; |
| 1127 | |
| 1128 | if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */ |
| 1129 | { |
David S. Miller | b03efcf | 2005-07-08 14:57:23 -0700 | [diff] [blame] | 1130 | if (skb_queue_empty(&scc->tx_queue)) { /* nothing to send */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1131 | scc->stat.tx_state = TXS_IDLE; |
| 1132 | netif_wake_queue(scc->dev); /* t_maxkeyup locked it. */ |
| 1133 | return; |
| 1134 | } |
| 1135 | |
| 1136 | scc->stat.tx_state = TXS_BUSY; |
| 1137 | } |
| 1138 | |
| 1139 | if (scc->kiss.fulldup == KISS_DUPLEX_HALF) |
| 1140 | { |
| 1141 | Rand = Rand * 17 + 31; |
| 1142 | |
| 1143 | if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) ) |
| 1144 | { |
| 1145 | scc_start_defer(scc); |
| 1146 | scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime); |
| 1147 | return ; |
| 1148 | } |
| 1149 | } |
| 1150 | |
| 1151 | if ( !(scc->wreg[R5] & RTS) ) |
| 1152 | { |
| 1153 | scc_key_trx(scc, TX_ON); |
| 1154 | scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); |
| 1155 | } else { |
| 1156 | scc_start_tx_timer(scc, t_txdelay, 0); |
| 1157 | } |
| 1158 | } |
| 1159 | |
| 1160 | |
| 1161 | /* TXDELAY expired |
| 1162 | * |
| 1163 | * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog. |
| 1164 | */ |
| 1165 | |
| 1166 | static void t_txdelay(unsigned long channel) |
| 1167 | { |
| 1168 | struct scc_channel *scc = (struct scc_channel *) channel; |
| 1169 | |
| 1170 | scc_start_maxkeyup(scc); |
| 1171 | |
| 1172 | if (scc->tx_buff == NULL) |
| 1173 | { |
| 1174 | disable_irq(scc->irq); |
| 1175 | scc_txint(scc); |
| 1176 | enable_irq(scc->irq); |
| 1177 | } |
| 1178 | } |
| 1179 | |
| 1180 | |
| 1181 | /* TAILTIME expired |
| 1182 | * |
| 1183 | * switch off transmitter. If we were stopped by Maxkeyup restart |
| 1184 | * transmission after 'mintime' seconds |
| 1185 | */ |
| 1186 | |
| 1187 | static void t_tail(unsigned long channel) |
| 1188 | { |
| 1189 | struct scc_channel *scc = (struct scc_channel *) channel; |
| 1190 | unsigned long flags; |
| 1191 | |
| 1192 | spin_lock_irqsave(&scc->lock, flags); |
| 1193 | del_timer(&scc->tx_wdog); |
| 1194 | scc_key_trx(scc, TX_OFF); |
| 1195 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1196 | |
| 1197 | if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */ |
| 1198 | { |
| 1199 | scc->stat.tx_state = TXS_WAIT; |
| 1200 | scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); |
| 1201 | return; |
| 1202 | } |
| 1203 | |
| 1204 | scc->stat.tx_state = TXS_IDLE; |
| 1205 | netif_wake_queue(scc->dev); |
| 1206 | } |
| 1207 | |
| 1208 | |
| 1209 | /* BUSY timeout |
| 1210 | * |
| 1211 | * throw away send buffers if DCD remains active too long. |
| 1212 | */ |
| 1213 | |
| 1214 | static void t_busy(unsigned long channel) |
| 1215 | { |
| 1216 | struct scc_channel *scc = (struct scc_channel *) channel; |
| 1217 | |
| 1218 | del_timer(&scc->tx_t); |
| 1219 | netif_stop_queue(scc->dev); /* don't pile on the wabbit! */ |
| 1220 | |
| 1221 | scc_discard_buffers(scc); |
| 1222 | scc->stat.txerrs++; |
| 1223 | scc->stat.tx_state = TXS_IDLE; |
| 1224 | |
| 1225 | netif_wake_queue(scc->dev); |
| 1226 | } |
| 1227 | |
| 1228 | /* MAXKEYUP timeout |
| 1229 | * |
| 1230 | * this is our watchdog. |
| 1231 | */ |
| 1232 | |
| 1233 | static void t_maxkeyup(unsigned long channel) |
| 1234 | { |
| 1235 | struct scc_channel *scc = (struct scc_channel *) channel; |
| 1236 | unsigned long flags; |
| 1237 | |
| 1238 | spin_lock_irqsave(&scc->lock, flags); |
| 1239 | /* |
| 1240 | * let things settle down before we start to |
| 1241 | * accept new data. |
| 1242 | */ |
| 1243 | |
| 1244 | netif_stop_queue(scc->dev); |
| 1245 | scc_discard_buffers(scc); |
| 1246 | |
| 1247 | del_timer(&scc->tx_t); |
| 1248 | |
| 1249 | cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */ |
| 1250 | cl(scc, R15, TxUIE); /* count it. */ |
| 1251 | OutReg(scc->ctrl, R0, RES_Tx_P); |
| 1252 | |
| 1253 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1254 | |
| 1255 | scc->stat.txerrs++; |
| 1256 | scc->stat.tx_state = TXS_TIMEOUT; |
| 1257 | scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); |
| 1258 | } |
| 1259 | |
| 1260 | /* IDLE timeout |
| 1261 | * |
| 1262 | * in fulldup mode 2 it keys down the transmitter after 'idle' seconds |
| 1263 | * of inactivity. We will not restart transmission before 'mintime' |
| 1264 | * expires. |
| 1265 | */ |
| 1266 | |
| 1267 | static void t_idle(unsigned long channel) |
| 1268 | { |
| 1269 | struct scc_channel *scc = (struct scc_channel *) channel; |
| 1270 | |
| 1271 | del_timer(&scc->tx_wdog); |
| 1272 | |
| 1273 | scc_key_trx(scc, TX_OFF); |
| 1274 | if(scc->kiss.mintime) |
| 1275 | scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); |
| 1276 | scc->stat.tx_state = TXS_WAIT; |
| 1277 | } |
| 1278 | |
| 1279 | static void scc_init_timer(struct scc_channel *scc) |
| 1280 | { |
| 1281 | unsigned long flags; |
| 1282 | |
| 1283 | spin_lock_irqsave(&scc->lock, flags); |
| 1284 | scc->stat.tx_state = TXS_IDLE; |
| 1285 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1286 | } |
| 1287 | |
| 1288 | |
| 1289 | /* ******************************************************************** */ |
| 1290 | /* * Set/get L1 parameters * */ |
| 1291 | /* ******************************************************************** */ |
| 1292 | |
| 1293 | |
| 1294 | /* |
| 1295 | * this will set the "hardware" parameters through KISS commands or ioctl() |
| 1296 | */ |
| 1297 | |
| 1298 | #define CAST(x) (unsigned long)(x) |
| 1299 | |
| 1300 | static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg) |
| 1301 | { |
| 1302 | switch (cmd) |
| 1303 | { |
| 1304 | case PARAM_TXDELAY: scc->kiss.txdelay=arg; break; |
| 1305 | case PARAM_PERSIST: scc->kiss.persist=arg; break; |
| 1306 | case PARAM_SLOTTIME: scc->kiss.slottime=arg; break; |
| 1307 | case PARAM_TXTAIL: scc->kiss.tailtime=arg; break; |
| 1308 | case PARAM_FULLDUP: scc->kiss.fulldup=arg; break; |
| 1309 | case PARAM_DTR: break; /* does someone need this? */ |
| 1310 | case PARAM_GROUP: scc->kiss.group=arg; break; |
| 1311 | case PARAM_IDLE: scc->kiss.idletime=arg; break; |
| 1312 | case PARAM_MIN: scc->kiss.mintime=arg; break; |
| 1313 | case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break; |
| 1314 | case PARAM_WAIT: scc->kiss.waittime=arg; break; |
| 1315 | case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break; |
| 1316 | case PARAM_TX: scc->kiss.tx_inhibit=arg; break; |
| 1317 | |
| 1318 | case PARAM_SOFTDCD: |
| 1319 | scc->kiss.softdcd=arg; |
| 1320 | if (arg) |
| 1321 | { |
| 1322 | or(scc, R15, SYNCIE); |
| 1323 | cl(scc, R15, DCDIE); |
| 1324 | start_hunt(scc); |
| 1325 | } else { |
| 1326 | or(scc, R15, DCDIE); |
| 1327 | cl(scc, R15, SYNCIE); |
| 1328 | } |
| 1329 | break; |
| 1330 | |
| 1331 | case PARAM_SPEED: |
| 1332 | if (arg < 256) |
| 1333 | scc->modem.speed=arg*100; |
| 1334 | else |
| 1335 | scc->modem.speed=arg; |
| 1336 | |
| 1337 | if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */ |
| 1338 | set_speed(scc); |
| 1339 | break; |
| 1340 | |
| 1341 | case PARAM_RTS: |
| 1342 | if ( !(scc->wreg[R5] & RTS) ) |
| 1343 | { |
Ilpo Järvinen | 6941727 | 2008-05-13 14:16:53 +0300 | [diff] [blame] | 1344 | if (arg != TX_OFF) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1345 | scc_key_trx(scc, TX_ON); |
| 1346 | scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); |
Ilpo Järvinen | 6941727 | 2008-05-13 14:16:53 +0300 | [diff] [blame] | 1347 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1348 | } else { |
| 1349 | if (arg == TX_OFF) |
| 1350 | { |
| 1351 | scc->stat.tx_state = TXS_BUSY; |
| 1352 | scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); |
| 1353 | } |
| 1354 | } |
| 1355 | break; |
| 1356 | |
| 1357 | case PARAM_HWEVENT: |
| 1358 | scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); |
| 1359 | break; |
| 1360 | |
| 1361 | default: return -EINVAL; |
| 1362 | } |
| 1363 | |
| 1364 | return 0; |
| 1365 | } |
| 1366 | |
| 1367 | |
| 1368 | |
| 1369 | static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd) |
| 1370 | { |
| 1371 | switch (cmd) |
| 1372 | { |
| 1373 | case PARAM_TXDELAY: return CAST(scc->kiss.txdelay); |
| 1374 | case PARAM_PERSIST: return CAST(scc->kiss.persist); |
| 1375 | case PARAM_SLOTTIME: return CAST(scc->kiss.slottime); |
| 1376 | case PARAM_TXTAIL: return CAST(scc->kiss.tailtime); |
| 1377 | case PARAM_FULLDUP: return CAST(scc->kiss.fulldup); |
| 1378 | case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd); |
| 1379 | case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0); |
| 1380 | case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0); |
| 1381 | case PARAM_SPEED: return CAST(scc->modem.speed); |
| 1382 | case PARAM_GROUP: return CAST(scc->kiss.group); |
| 1383 | case PARAM_IDLE: return CAST(scc->kiss.idletime); |
| 1384 | case PARAM_MIN: return CAST(scc->kiss.mintime); |
| 1385 | case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup); |
| 1386 | case PARAM_WAIT: return CAST(scc->kiss.waittime); |
| 1387 | case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer); |
| 1388 | case PARAM_TX: return CAST(scc->kiss.tx_inhibit); |
| 1389 | default: return NO_SUCH_PARAM; |
| 1390 | } |
| 1391 | |
| 1392 | } |
| 1393 | |
| 1394 | #undef CAST |
| 1395 | |
| 1396 | /* ******************************************************************* */ |
| 1397 | /* * Send calibration pattern * */ |
| 1398 | /* ******************************************************************* */ |
| 1399 | |
| 1400 | static void scc_stop_calibrate(unsigned long channel) |
| 1401 | { |
| 1402 | struct scc_channel *scc = (struct scc_channel *) channel; |
| 1403 | unsigned long flags; |
| 1404 | |
| 1405 | spin_lock_irqsave(&scc->lock, flags); |
| 1406 | del_timer(&scc->tx_wdog); |
| 1407 | scc_key_trx(scc, TX_OFF); |
| 1408 | wr(scc, R6, 0); |
| 1409 | wr(scc, R7, FLAG); |
| 1410 | Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ |
| 1411 | Outb(scc->ctrl,RES_EXT_INT); |
| 1412 | |
| 1413 | netif_wake_queue(scc->dev); |
| 1414 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1415 | } |
| 1416 | |
| 1417 | |
| 1418 | static void |
| 1419 | scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern) |
| 1420 | { |
| 1421 | unsigned long flags; |
| 1422 | |
| 1423 | spin_lock_irqsave(&scc->lock, flags); |
| 1424 | netif_stop_queue(scc->dev); |
| 1425 | scc_discard_buffers(scc); |
| 1426 | |
| 1427 | del_timer(&scc->tx_wdog); |
| 1428 | |
| 1429 | scc->tx_wdog.data = (unsigned long) scc; |
| 1430 | scc->tx_wdog.function = scc_stop_calibrate; |
| 1431 | scc->tx_wdog.expires = jiffies + HZ*duration; |
| 1432 | add_timer(&scc->tx_wdog); |
| 1433 | |
| 1434 | /* This doesn't seem to work. Why not? */ |
| 1435 | wr(scc, R6, 0); |
| 1436 | wr(scc, R7, pattern); |
| 1437 | |
| 1438 | /* |
| 1439 | * Don't know if this works. |
| 1440 | * Damn, where is my Z8530 programming manual...? |
| 1441 | */ |
| 1442 | |
| 1443 | Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ |
| 1444 | Outb(scc->ctrl,RES_EXT_INT); |
| 1445 | |
| 1446 | scc_key_trx(scc, TX_ON); |
| 1447 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1448 | } |
| 1449 | |
| 1450 | /* ******************************************************************* */ |
| 1451 | /* * Init channel structures, special HW, etc... * */ |
| 1452 | /* ******************************************************************* */ |
| 1453 | |
| 1454 | /* |
| 1455 | * Reset the Z8530s and setup special hardware |
| 1456 | */ |
| 1457 | |
| 1458 | static void z8530_init(void) |
| 1459 | { |
| 1460 | struct scc_channel *scc; |
| 1461 | int chip, k; |
| 1462 | unsigned long flags; |
| 1463 | char *flag; |
| 1464 | |
| 1465 | |
| 1466 | printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2); |
| 1467 | |
| 1468 | flag=" "; |
Yinghai Lu | 60e4ad7 | 2008-08-19 20:49:50 -0700 | [diff] [blame] | 1469 | for (k = 0; k < nr_irqs; k++) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1470 | if (Ivec[k].used) |
| 1471 | { |
| 1472 | printk("%s%d", flag, k); |
| 1473 | flag=","; |
| 1474 | } |
| 1475 | printk("\n"); |
| 1476 | |
| 1477 | |
| 1478 | /* reset and pre-init all chips in the system */ |
| 1479 | for (chip = 0; chip < Nchips; chip++) |
| 1480 | { |
| 1481 | scc=&SCC_Info[2*chip]; |
| 1482 | if (!scc->ctrl) continue; |
| 1483 | |
| 1484 | /* Special SCC cards */ |
| 1485 | |
| 1486 | if(scc->brand & EAGLE) /* this is an EAGLE card */ |
| 1487 | Outb(scc->special,0x08); /* enable interrupt on the board */ |
| 1488 | |
| 1489 | if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */ |
| 1490 | Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */ |
| 1491 | |
| 1492 | |
| 1493 | /* Reset and pre-init Z8530 */ |
| 1494 | |
| 1495 | spin_lock_irqsave(&scc->lock, flags); |
| 1496 | |
| 1497 | Outb(scc->ctrl, 0); |
| 1498 | OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */ |
| 1499 | udelay(100); /* give it 'a bit' more time than required */ |
| 1500 | wr(scc, R2, chip*16); /* interrupt vector */ |
| 1501 | wr(scc, R9, VIS); /* vector includes status */ |
| 1502 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1503 | } |
| 1504 | |
| 1505 | |
| 1506 | Driver_Initialized = 1; |
| 1507 | } |
| 1508 | |
| 1509 | /* |
| 1510 | * Allocate device structure, err, instance, and register driver |
| 1511 | */ |
| 1512 | |
| 1513 | static int scc_net_alloc(const char *name, struct scc_channel *scc) |
| 1514 | { |
| 1515 | int err; |
| 1516 | struct net_device *dev; |
| 1517 | |
| 1518 | dev = alloc_netdev(0, name, scc_net_setup); |
| 1519 | if (!dev) |
| 1520 | return -ENOMEM; |
| 1521 | |
Wang Chen | f4bdd26 | 2008-11-20 01:02:05 -0800 | [diff] [blame] | 1522 | dev->ml_priv = scc; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1523 | scc->dev = dev; |
| 1524 | spin_lock_init(&scc->lock); |
| 1525 | init_timer(&scc->tx_t); |
| 1526 | init_timer(&scc->tx_wdog); |
| 1527 | |
| 1528 | err = register_netdevice(dev); |
| 1529 | if (err) { |
| 1530 | printk(KERN_ERR "%s: can't register network device (%d)\n", |
| 1531 | name, err); |
| 1532 | free_netdev(dev); |
| 1533 | scc->dev = NULL; |
| 1534 | return err; |
| 1535 | } |
| 1536 | |
| 1537 | return 0; |
| 1538 | } |
| 1539 | |
| 1540 | |
| 1541 | |
| 1542 | /* ******************************************************************** */ |
| 1543 | /* * Network driver methods * */ |
| 1544 | /* ******************************************************************** */ |
| 1545 | |
Stephen Hemminger | ff908cf | 2009-01-09 13:01:39 +0000 | [diff] [blame] | 1546 | static const struct net_device_ops scc_netdev_ops = { |
| 1547 | .ndo_open = scc_net_open, |
| 1548 | .ndo_stop = scc_net_close, |
| 1549 | .ndo_start_xmit = scc_net_tx, |
| 1550 | .ndo_set_mac_address = scc_net_set_mac_address, |
| 1551 | .ndo_get_stats = scc_net_get_stats, |
| 1552 | .ndo_do_ioctl = scc_net_ioctl, |
| 1553 | }; |
| 1554 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1555 | /* ----> Initialize device <----- */ |
| 1556 | |
| 1557 | static void scc_net_setup(struct net_device *dev) |
| 1558 | { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1559 | dev->tx_queue_len = 16; /* should be enough... */ |
| 1560 | |
Stephen Hemminger | ff908cf | 2009-01-09 13:01:39 +0000 | [diff] [blame] | 1561 | dev->netdev_ops = &scc_netdev_ops; |
Stephen Hemminger | 3b04ddd | 2007-10-09 01:40:57 -0700 | [diff] [blame] | 1562 | dev->header_ops = &ax25_header_ops; |
| 1563 | |
Ralf Baechle | 15b1c0e | 2006-12-07 15:47:08 -0800 | [diff] [blame] | 1564 | memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); |
| 1565 | memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1566 | |
| 1567 | dev->flags = 0; |
| 1568 | |
| 1569 | dev->type = ARPHRD_AX25; |
| 1570 | dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; |
| 1571 | dev->mtu = AX25_DEF_PACLEN; |
| 1572 | dev->addr_len = AX25_ADDR_LEN; |
| 1573 | |
| 1574 | } |
| 1575 | |
| 1576 | /* ----> open network device <---- */ |
| 1577 | |
| 1578 | static int scc_net_open(struct net_device *dev) |
| 1579 | { |
Wang Chen | f4bdd26 | 2008-11-20 01:02:05 -0800 | [diff] [blame] | 1580 | struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1581 | |
| 1582 | if (!scc->init) |
| 1583 | return -EINVAL; |
| 1584 | |
| 1585 | scc->tx_buff = NULL; |
| 1586 | skb_queue_head_init(&scc->tx_queue); |
| 1587 | |
| 1588 | init_channel(scc); |
| 1589 | |
| 1590 | netif_start_queue(dev); |
| 1591 | return 0; |
| 1592 | } |
| 1593 | |
| 1594 | /* ----> close network device <---- */ |
| 1595 | |
| 1596 | static int scc_net_close(struct net_device *dev) |
| 1597 | { |
Wang Chen | f4bdd26 | 2008-11-20 01:02:05 -0800 | [diff] [blame] | 1598 | struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1599 | unsigned long flags; |
| 1600 | |
| 1601 | netif_stop_queue(dev); |
| 1602 | |
| 1603 | spin_lock_irqsave(&scc->lock, flags); |
| 1604 | Outb(scc->ctrl,0); /* Make sure pointer is written */ |
| 1605 | wr(scc,R1,0); /* disable interrupts */ |
| 1606 | wr(scc,R3,0); |
| 1607 | spin_unlock_irqrestore(&scc->lock, flags); |
| 1608 | |
| 1609 | del_timer_sync(&scc->tx_t); |
| 1610 | del_timer_sync(&scc->tx_wdog); |
| 1611 | |
| 1612 | scc_discard_buffers(scc); |
| 1613 | |
| 1614 | return 0; |
| 1615 | } |
| 1616 | |
| 1617 | /* ----> receive frame, called from scc_rxint() <---- */ |
| 1618 | |
| 1619 | static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb) |
| 1620 | { |
| 1621 | if (skb->len == 0) { |
| 1622 | dev_kfree_skb_irq(skb); |
| 1623 | return; |
| 1624 | } |
| 1625 | |
| 1626 | scc->dev_stat.rx_packets++; |
| 1627 | scc->dev_stat.rx_bytes += skb->len; |
| 1628 | |
Arnaldo Carvalho de Melo | 56cb515 | 2005-04-24 18:53:06 -0700 | [diff] [blame] | 1629 | skb->protocol = ax25_type_trans(skb, scc->dev); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1630 | |
| 1631 | netif_rx(skb); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1632 | } |
| 1633 | |
| 1634 | /* ----> transmit frame <---- */ |
| 1635 | |
Stephen Hemminger | 36e4d64 | 2009-08-31 19:50:43 +0000 | [diff] [blame] | 1636 | static netdev_tx_t scc_net_tx(struct sk_buff *skb, struct net_device *dev) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1637 | { |
Wang Chen | f4bdd26 | 2008-11-20 01:02:05 -0800 | [diff] [blame] | 1638 | struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1639 | unsigned long flags; |
| 1640 | char kisscmd; |
| 1641 | |
| 1642 | if (skb->len > scc->stat.bufsize || skb->len < 2) { |
| 1643 | scc->dev_stat.tx_dropped++; /* bogus frame */ |
| 1644 | dev_kfree_skb(skb); |
Patrick McHardy | 6ed1065 | 2009-06-23 06:03:08 +0000 | [diff] [blame] | 1645 | return NETDEV_TX_OK; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1646 | } |
| 1647 | |
| 1648 | scc->dev_stat.tx_packets++; |
| 1649 | scc->dev_stat.tx_bytes += skb->len; |
| 1650 | scc->stat.txframes++; |
| 1651 | |
| 1652 | kisscmd = *skb->data & 0x1f; |
| 1653 | skb_pull(skb, 1); |
| 1654 | |
| 1655 | if (kisscmd) { |
| 1656 | scc_set_param(scc, kisscmd, *skb->data); |
| 1657 | dev_kfree_skb(skb); |
Patrick McHardy | 6ed1065 | 2009-06-23 06:03:08 +0000 | [diff] [blame] | 1658 | return NETDEV_TX_OK; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1659 | } |
| 1660 | |
| 1661 | spin_lock_irqsave(&scc->lock, flags); |
| 1662 | |
| 1663 | if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) { |
| 1664 | struct sk_buff *skb_del; |
| 1665 | skb_del = skb_dequeue(&scc->tx_queue); |
| 1666 | dev_kfree_skb(skb_del); |
| 1667 | } |
| 1668 | skb_queue_tail(&scc->tx_queue, skb); |
| 1669 | dev->trans_start = jiffies; |
| 1670 | |
| 1671 | |
| 1672 | /* |
| 1673 | * Start transmission if the trx state is idle or |
| 1674 | * t_idle hasn't expired yet. Use dwait/persistence/slottime |
| 1675 | * algorithm for normal halfduplex operation. |
| 1676 | */ |
| 1677 | |
| 1678 | if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) { |
| 1679 | scc->stat.tx_state = TXS_BUSY; |
| 1680 | if (scc->kiss.fulldup == KISS_DUPLEX_HALF) |
| 1681 | __scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime); |
| 1682 | else |
| 1683 | __scc_start_tx_timer(scc, t_dwait, 0); |
| 1684 | } |
| 1685 | spin_unlock_irqrestore(&scc->lock, flags); |
Patrick McHardy | 6ed1065 | 2009-06-23 06:03:08 +0000 | [diff] [blame] | 1686 | return NETDEV_TX_OK; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1687 | } |
| 1688 | |
| 1689 | /* ----> ioctl functions <---- */ |
| 1690 | |
| 1691 | /* |
| 1692 | * SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg |
| 1693 | * SIOCSCCINI - initialize driver arg: --- |
| 1694 | * SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg |
| 1695 | * SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg |
| 1696 | * SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg |
| 1697 | * SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg |
| 1698 | * SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg |
| 1699 | * SIOCSCCCAL - send calib. pattern arg: (struct scc_calibrate *) arg |
| 1700 | */ |
| 1701 | |
| 1702 | static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| 1703 | { |
| 1704 | struct scc_kiss_cmd kiss_cmd; |
| 1705 | struct scc_mem_config memcfg; |
| 1706 | struct scc_hw_config hwcfg; |
| 1707 | struct scc_calibrate cal; |
Wang Chen | f4bdd26 | 2008-11-20 01:02:05 -0800 | [diff] [blame] | 1708 | struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1709 | int chan; |
| 1710 | unsigned char device_name[IFNAMSIZ]; |
| 1711 | void __user *arg = ifr->ifr_data; |
| 1712 | |
| 1713 | |
| 1714 | if (!Driver_Initialized) |
| 1715 | { |
| 1716 | if (cmd == SIOCSCCCFG) |
| 1717 | { |
| 1718 | int found = 1; |
| 1719 | |
| 1720 | if (!capable(CAP_SYS_RAWIO)) return -EPERM; |
| 1721 | if (!arg) return -EFAULT; |
| 1722 | |
| 1723 | if (Nchips >= SCC_MAXCHIPS) |
| 1724 | return -EINVAL; |
| 1725 | |
| 1726 | if (copy_from_user(&hwcfg, arg, sizeof(hwcfg))) |
| 1727 | return -EFAULT; |
| 1728 | |
| 1729 | if (hwcfg.irq == 2) hwcfg.irq = 9; |
| 1730 | |
Yinghai Lu | 60e4ad7 | 2008-08-19 20:49:50 -0700 | [diff] [blame] | 1731 | if (hwcfg.irq < 0 || hwcfg.irq >= nr_irqs) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1732 | return -EINVAL; |
| 1733 | |
| 1734 | if (!Ivec[hwcfg.irq].used && hwcfg.irq) |
| 1735 | { |
Jeff Garzik | 1b36efe | 2007-10-29 05:20:44 -0400 | [diff] [blame] | 1736 | if (request_irq(hwcfg.irq, scc_isr, |
| 1737 | IRQF_DISABLED, "AX.25 SCC", |
| 1738 | (void *)(long) hwcfg.irq)) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1739 | printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq); |
| 1740 | else |
| 1741 | Ivec[hwcfg.irq].used = 1; |
| 1742 | } |
| 1743 | |
| 1744 | if (hwcfg.vector_latch && !Vector_Latch) { |
| 1745 | if (!request_region(hwcfg.vector_latch, 1, "scc vector latch")) |
| 1746 | printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch); |
| 1747 | else |
| 1748 | Vector_Latch = hwcfg.vector_latch; |
| 1749 | } |
| 1750 | |
| 1751 | if (hwcfg.clock == 0) |
| 1752 | hwcfg.clock = SCC_DEFAULT_CLOCK; |
| 1753 | |
| 1754 | #ifndef SCC_DONT_CHECK |
| 1755 | |
| 1756 | if(request_region(hwcfg.ctrl_a, 1, "scc-probe")) |
| 1757 | { |
| 1758 | disable_irq(hwcfg.irq); |
| 1759 | Outb(hwcfg.ctrl_a, 0); |
| 1760 | OutReg(hwcfg.ctrl_a, R9, FHWRES); |
| 1761 | udelay(100); |
| 1762 | OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */ |
| 1763 | udelay(5); |
| 1764 | |
| 1765 | if (InReg(hwcfg.ctrl_a,R13) != 0x55) |
| 1766 | found = 0; |
| 1767 | enable_irq(hwcfg.irq); |
| 1768 | release_region(hwcfg.ctrl_a, 1); |
| 1769 | } |
| 1770 | else |
| 1771 | found = 0; |
| 1772 | #endif |
| 1773 | |
| 1774 | if (found) |
| 1775 | { |
| 1776 | SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a; |
| 1777 | SCC_Info[2*Nchips ].data = hwcfg.data_a; |
| 1778 | SCC_Info[2*Nchips ].irq = hwcfg.irq; |
| 1779 | SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b; |
| 1780 | SCC_Info[2*Nchips+1].data = hwcfg.data_b; |
| 1781 | SCC_Info[2*Nchips+1].irq = hwcfg.irq; |
| 1782 | |
| 1783 | SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a; |
| 1784 | SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b; |
| 1785 | SCC_ctrl[Nchips].irq = hwcfg.irq; |
| 1786 | } |
| 1787 | |
| 1788 | |
| 1789 | for (chan = 0; chan < 2; chan++) |
| 1790 | { |
| 1791 | sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan); |
| 1792 | |
| 1793 | SCC_Info[2*Nchips+chan].special = hwcfg.special; |
| 1794 | SCC_Info[2*Nchips+chan].clock = hwcfg.clock; |
| 1795 | SCC_Info[2*Nchips+chan].brand = hwcfg.brand; |
| 1796 | SCC_Info[2*Nchips+chan].option = hwcfg.option; |
| 1797 | SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc; |
| 1798 | |
| 1799 | #ifdef SCC_DONT_CHECK |
| 1800 | printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n", |
| 1801 | device_name, |
| 1802 | SCC_Info[2*Nchips+chan].data, |
| 1803 | SCC_Info[2*Nchips+chan].ctrl); |
| 1804 | |
| 1805 | #else |
| 1806 | printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n", |
| 1807 | device_name, |
| 1808 | chan? hwcfg.data_b : hwcfg.data_a, |
| 1809 | chan? hwcfg.ctrl_b : hwcfg.ctrl_a, |
| 1810 | found? "found" : "missing"); |
| 1811 | #endif |
| 1812 | |
| 1813 | if (found) |
| 1814 | { |
| 1815 | request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl"); |
| 1816 | request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data"); |
| 1817 | if (Nchips+chan != 0 && |
| 1818 | scc_net_alloc(device_name, |
| 1819 | &SCC_Info[2*Nchips+chan])) |
| 1820 | return -EINVAL; |
| 1821 | } |
| 1822 | } |
| 1823 | |
| 1824 | if (found) Nchips++; |
| 1825 | |
| 1826 | return 0; |
| 1827 | } |
| 1828 | |
| 1829 | if (cmd == SIOCSCCINI) |
| 1830 | { |
| 1831 | if (!capable(CAP_SYS_RAWIO)) |
| 1832 | return -EPERM; |
| 1833 | |
| 1834 | if (Nchips == 0) |
| 1835 | return -EINVAL; |
| 1836 | |
| 1837 | z8530_init(); |
| 1838 | return 0; |
| 1839 | } |
| 1840 | |
| 1841 | return -EINVAL; /* confuse the user */ |
| 1842 | } |
| 1843 | |
| 1844 | if (!scc->init) |
| 1845 | { |
| 1846 | if (cmd == SIOCSCCCHANINI) |
| 1847 | { |
| 1848 | if (!capable(CAP_NET_ADMIN)) return -EPERM; |
| 1849 | if (!arg) return -EINVAL; |
| 1850 | |
| 1851 | scc->stat.bufsize = SCC_BUFSIZE; |
| 1852 | |
| 1853 | if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem))) |
| 1854 | return -EINVAL; |
| 1855 | |
| 1856 | /* default KISS Params */ |
| 1857 | |
| 1858 | if (scc->modem.speed < 4800) |
| 1859 | { |
| 1860 | scc->kiss.txdelay = 36; /* 360 ms */ |
| 1861 | scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */ |
| 1862 | scc->kiss.slottime = 16; /* 160 ms */ |
| 1863 | scc->kiss.tailtime = 4; /* minimal reasonable value */ |
| 1864 | scc->kiss.fulldup = 0; /* CSMA */ |
| 1865 | scc->kiss.waittime = 50; /* 500 ms */ |
| 1866 | scc->kiss.maxkeyup = 10; /* 10 s */ |
| 1867 | scc->kiss.mintime = 3; /* 3 s */ |
| 1868 | scc->kiss.idletime = 30; /* 30 s */ |
| 1869 | scc->kiss.maxdefer = 120; /* 2 min */ |
| 1870 | scc->kiss.softdcd = 0; /* hardware dcd */ |
| 1871 | } else { |
| 1872 | scc->kiss.txdelay = 10; /* 100 ms */ |
| 1873 | scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */ |
| 1874 | scc->kiss.slottime = 8; /* 160 ms */ |
| 1875 | scc->kiss.tailtime = 1; /* minimal reasonable value */ |
| 1876 | scc->kiss.fulldup = 0; /* CSMA */ |
| 1877 | scc->kiss.waittime = 50; /* 500 ms */ |
| 1878 | scc->kiss.maxkeyup = 7; /* 7 s */ |
| 1879 | scc->kiss.mintime = 3; /* 3 s */ |
| 1880 | scc->kiss.idletime = 30; /* 30 s */ |
| 1881 | scc->kiss.maxdefer = 120; /* 2 min */ |
| 1882 | scc->kiss.softdcd = 0; /* hardware dcd */ |
| 1883 | } |
| 1884 | |
| 1885 | scc->tx_buff = NULL; |
| 1886 | skb_queue_head_init(&scc->tx_queue); |
| 1887 | scc->init = 1; |
| 1888 | |
| 1889 | return 0; |
| 1890 | } |
| 1891 | |
| 1892 | return -EINVAL; |
| 1893 | } |
| 1894 | |
| 1895 | switch(cmd) |
| 1896 | { |
| 1897 | case SIOCSCCRESERVED: |
| 1898 | return -ENOIOCTLCMD; |
| 1899 | |
| 1900 | case SIOCSCCSMEM: |
| 1901 | if (!capable(CAP_SYS_RAWIO)) return -EPERM; |
| 1902 | if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg))) |
| 1903 | return -EINVAL; |
| 1904 | scc->stat.bufsize = memcfg.bufsize; |
| 1905 | return 0; |
| 1906 | |
| 1907 | case SIOCSCCGSTAT: |
| 1908 | if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat))) |
| 1909 | return -EINVAL; |
| 1910 | return 0; |
| 1911 | |
| 1912 | case SIOCSCCGKISS: |
| 1913 | if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) |
| 1914 | return -EINVAL; |
| 1915 | kiss_cmd.param = scc_get_param(scc, kiss_cmd.command); |
| 1916 | if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd))) |
| 1917 | return -EINVAL; |
| 1918 | return 0; |
| 1919 | |
| 1920 | case SIOCSCCSKISS: |
| 1921 | if (!capable(CAP_NET_ADMIN)) return -EPERM; |
| 1922 | if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) |
| 1923 | return -EINVAL; |
| 1924 | return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param); |
| 1925 | |
| 1926 | case SIOCSCCCAL: |
| 1927 | if (!capable(CAP_SYS_RAWIO)) return -EPERM; |
| 1928 | if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0) |
| 1929 | return -EINVAL; |
| 1930 | |
| 1931 | scc_start_calibrate(scc, cal.time, cal.pattern); |
| 1932 | return 0; |
| 1933 | |
| 1934 | default: |
| 1935 | return -ENOIOCTLCMD; |
| 1936 | |
| 1937 | } |
| 1938 | |
| 1939 | return -EINVAL; |
| 1940 | } |
| 1941 | |
| 1942 | /* ----> set interface callsign <---- */ |
| 1943 | |
| 1944 | static int scc_net_set_mac_address(struct net_device *dev, void *addr) |
| 1945 | { |
| 1946 | struct sockaddr *sa = (struct sockaddr *) addr; |
| 1947 | memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); |
| 1948 | return 0; |
| 1949 | } |
| 1950 | |
| 1951 | /* ----> get statistics <---- */ |
| 1952 | |
| 1953 | static struct net_device_stats *scc_net_get_stats(struct net_device *dev) |
| 1954 | { |
Wang Chen | f4bdd26 | 2008-11-20 01:02:05 -0800 | [diff] [blame] | 1955 | struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1956 | |
| 1957 | scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over; |
| 1958 | scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under; |
| 1959 | scc->dev_stat.rx_fifo_errors = scc->stat.rx_over; |
| 1960 | scc->dev_stat.tx_fifo_errors = scc->stat.tx_under; |
| 1961 | |
| 1962 | return &scc->dev_stat; |
| 1963 | } |
| 1964 | |
| 1965 | /* ******************************************************************** */ |
| 1966 | /* * dump statistics to /proc/net/z8530drv * */ |
| 1967 | /* ******************************************************************** */ |
| 1968 | |
| 1969 | #ifdef CONFIG_PROC_FS |
| 1970 | |
| 1971 | static inline struct scc_channel *scc_net_seq_idx(loff_t pos) |
| 1972 | { |
| 1973 | int k; |
| 1974 | |
| 1975 | for (k = 0; k < Nchips*2; ++k) { |
| 1976 | if (!SCC_Info[k].init) |
| 1977 | continue; |
| 1978 | if (pos-- == 0) |
| 1979 | return &SCC_Info[k]; |
| 1980 | } |
| 1981 | return NULL; |
| 1982 | } |
| 1983 | |
| 1984 | static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos) |
| 1985 | { |
| 1986 | return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN; |
| 1987 | |
| 1988 | } |
| 1989 | |
| 1990 | static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos) |
| 1991 | { |
| 1992 | unsigned k; |
| 1993 | struct scc_channel *scc = v; |
| 1994 | ++*pos; |
| 1995 | |
| 1996 | for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1; |
| 1997 | k < Nchips*2; ++k) { |
| 1998 | if (SCC_Info[k].init) |
| 1999 | return &SCC_Info[k]; |
| 2000 | } |
| 2001 | return NULL; |
| 2002 | } |
| 2003 | |
| 2004 | static void scc_net_seq_stop(struct seq_file *seq, void *v) |
| 2005 | { |
| 2006 | } |
| 2007 | |
| 2008 | static int scc_net_seq_show(struct seq_file *seq, void *v) |
| 2009 | { |
| 2010 | if (v == SEQ_START_TOKEN) { |
| 2011 | seq_puts(seq, "z8530drv-"VERSION"\n"); |
| 2012 | } else if (!Driver_Initialized) { |
| 2013 | seq_puts(seq, "not initialized\n"); |
| 2014 | } else if (!Nchips) { |
| 2015 | seq_puts(seq, "chips missing\n"); |
| 2016 | } else { |
| 2017 | const struct scc_channel *scc = v; |
| 2018 | const struct scc_stat *stat = &scc->stat; |
| 2019 | const struct scc_kiss *kiss = &scc->kiss; |
| 2020 | |
| 2021 | |
| 2022 | /* dev data ctrl irq clock brand enh vector special option |
| 2023 | * baud nrz clocksrc softdcd bufsize |
| 2024 | * rxints txints exints spints |
| 2025 | * rcvd rxerrs over / xmit txerrs under / nospace bufsize |
| 2026 | * txd pers slot tail ful wait min maxk idl defr txof grp |
| 2027 | * W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## |
| 2028 | * R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ## |
| 2029 | */ |
| 2030 | |
| 2031 | seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n", |
| 2032 | scc->dev->name, |
| 2033 | scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand, |
| 2034 | scc->enhanced, Vector_Latch, scc->special, |
| 2035 | scc->option); |
| 2036 | seq_printf(seq, "\t%lu %d %d %d %d\n", |
| 2037 | scc->modem.speed, scc->modem.nrz, |
| 2038 | scc->modem.clocksrc, kiss->softdcd, |
| 2039 | stat->bufsize); |
| 2040 | seq_printf(seq, "\t%lu %lu %lu %lu\n", |
| 2041 | stat->rxints, stat->txints, stat->exints, stat->spints); |
| 2042 | seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n", |
| 2043 | stat->rxframes, stat->rxerrs, stat->rx_over, |
| 2044 | stat->txframes, stat->txerrs, stat->tx_under, |
| 2045 | stat->nospace, stat->tx_state); |
| 2046 | |
| 2047 | #define K(x) kiss->x |
| 2048 | seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n", |
| 2049 | K(txdelay), K(persist), K(slottime), K(tailtime), |
| 2050 | K(fulldup), K(waittime), K(mintime), K(maxkeyup), |
| 2051 | K(idletime), K(maxdefer), K(tx_inhibit), K(group)); |
| 2052 | #undef K |
| 2053 | #ifdef SCC_DEBUG |
| 2054 | { |
| 2055 | int reg; |
| 2056 | |
| 2057 | seq_printf(seq, "\tW "); |
| 2058 | for (reg = 0; reg < 16; reg++) |
| 2059 | seq_printf(seq, "%2.2x ", scc->wreg[reg]); |
| 2060 | seq_printf(seq, "\n"); |
| 2061 | |
| 2062 | seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1)); |
| 2063 | for (reg = 3; reg < 8; reg++) |
| 2064 | seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); |
| 2065 | seq_printf(seq, "XX "); |
| 2066 | for (reg = 9; reg < 16; reg++) |
| 2067 | seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); |
| 2068 | seq_printf(seq, "\n"); |
| 2069 | } |
| 2070 | #endif |
| 2071 | seq_putc(seq, '\n'); |
| 2072 | } |
| 2073 | |
| 2074 | return 0; |
| 2075 | } |
| 2076 | |
Jan Engelhardt | 4101dec | 2009-01-14 13:52:18 -0800 | [diff] [blame] | 2077 | static const struct seq_operations scc_net_seq_ops = { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2078 | .start = scc_net_seq_start, |
| 2079 | .next = scc_net_seq_next, |
| 2080 | .stop = scc_net_seq_stop, |
| 2081 | .show = scc_net_seq_show, |
| 2082 | }; |
| 2083 | |
| 2084 | |
| 2085 | static int scc_net_seq_open(struct inode *inode, struct file *file) |
| 2086 | { |
| 2087 | return seq_open(file, &scc_net_seq_ops); |
| 2088 | } |
| 2089 | |
Arjan van de Ven | d54b1fd | 2007-02-12 00:55:34 -0800 | [diff] [blame] | 2090 | static const struct file_operations scc_net_seq_fops = { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2091 | .owner = THIS_MODULE, |
| 2092 | .open = scc_net_seq_open, |
| 2093 | .read = seq_read, |
| 2094 | .llseek = seq_lseek, |
| 2095 | .release = seq_release_private, |
| 2096 | }; |
| 2097 | |
| 2098 | #endif /* CONFIG_PROC_FS */ |
| 2099 | |
| 2100 | |
| 2101 | /* ******************************************************************** */ |
| 2102 | /* * Init SCC driver * */ |
| 2103 | /* ******************************************************************** */ |
| 2104 | |
| 2105 | static int __init scc_init_driver (void) |
| 2106 | { |
| 2107 | char devname[IFNAMSIZ]; |
| 2108 | |
| 2109 | printk(banner); |
| 2110 | |
| 2111 | sprintf(devname,"%s0", SCC_DriverName); |
| 2112 | |
| 2113 | rtnl_lock(); |
| 2114 | if (scc_net_alloc(devname, SCC_Info)) { |
| 2115 | rtnl_unlock(); |
| 2116 | printk(KERN_ERR "z8530drv: cannot initialize module\n"); |
| 2117 | return -EIO; |
| 2118 | } |
| 2119 | rtnl_unlock(); |
| 2120 | |
Eric W. Biederman | 457c4cb | 2007-09-12 12:01:34 +0200 | [diff] [blame] | 2121 | proc_net_fops_create(&init_net, "z8530drv", 0, &scc_net_seq_fops); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2122 | |
| 2123 | return 0; |
| 2124 | } |
| 2125 | |
| 2126 | static void __exit scc_cleanup_driver(void) |
| 2127 | { |
| 2128 | io_port ctrl; |
| 2129 | int k; |
| 2130 | struct scc_channel *scc; |
| 2131 | struct net_device *dev; |
| 2132 | |
| 2133 | if (Nchips == 0 && (dev = SCC_Info[0].dev)) |
| 2134 | { |
| 2135 | unregister_netdev(dev); |
| 2136 | free_netdev(dev); |
| 2137 | } |
| 2138 | |
| 2139 | /* Guard against chip prattle */ |
| 2140 | local_irq_disable(); |
| 2141 | |
| 2142 | for (k = 0; k < Nchips; k++) |
| 2143 | if ( (ctrl = SCC_ctrl[k].chan_A) ) |
| 2144 | { |
| 2145 | Outb(ctrl, 0); |
| 2146 | OutReg(ctrl,R9,FHWRES); /* force hardware reset */ |
| 2147 | udelay(50); |
| 2148 | } |
| 2149 | |
| 2150 | /* To unload the port must be closed so no real IRQ pending */ |
Yinghai Lu | 60e4ad7 | 2008-08-19 20:49:50 -0700 | [diff] [blame] | 2151 | for (k = 0; k < nr_irqs ; k++) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2152 | if (Ivec[k].used) free_irq(k, NULL); |
| 2153 | |
| 2154 | local_irq_enable(); |
| 2155 | |
| 2156 | /* Now clean up */ |
| 2157 | for (k = 0; k < Nchips*2; k++) |
| 2158 | { |
| 2159 | scc = &SCC_Info[k]; |
| 2160 | if (scc->ctrl) |
| 2161 | { |
| 2162 | release_region(scc->ctrl, 1); |
| 2163 | release_region(scc->data, 1); |
| 2164 | } |
| 2165 | if (scc->dev) |
| 2166 | { |
| 2167 | unregister_netdev(scc->dev); |
| 2168 | free_netdev(scc->dev); |
| 2169 | } |
| 2170 | } |
| 2171 | |
| 2172 | |
| 2173 | if (Vector_Latch) |
| 2174 | release_region(Vector_Latch, 1); |
| 2175 | |
Eric W. Biederman | 457c4cb | 2007-09-12 12:01:34 +0200 | [diff] [blame] | 2176 | proc_net_remove(&init_net, "z8530drv"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 2177 | } |
| 2178 | |
| 2179 | MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>"); |
| 2180 | MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards"); |
| 2181 | MODULE_SUPPORTED_DEVICE("Z8530 based SCC cards for Amateur Radio"); |
| 2182 | MODULE_LICENSE("GPL"); |
| 2183 | module_init(scc_init_driver); |
| 2184 | module_exit(scc_cleanup_driver); |