Samuel Ortiz | ccdc7bf | 2007-07-17 04:04:13 -0700 | [diff] [blame] | 1 | /* |
| 2 | * OMAP2 McSPI controller driver |
| 3 | * |
| 4 | * Copyright (C) 2005, 2006 Nokia Corporation |
| 5 | * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and |
| 6 | * Juha Yrjölä <juha.yrjola@nokia.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License as published by |
| 10 | * the Free Software Foundation; either version 2 of the License, or |
| 11 | * (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 21 | * |
| 22 | */ |
| 23 | |
| 24 | #include <linux/kernel.h> |
| 25 | #include <linux/init.h> |
| 26 | #include <linux/interrupt.h> |
| 27 | #include <linux/module.h> |
| 28 | #include <linux/device.h> |
| 29 | #include <linux/delay.h> |
| 30 | #include <linux/dma-mapping.h> |
| 31 | #include <linux/platform_device.h> |
| 32 | #include <linux/err.h> |
| 33 | #include <linux/clk.h> |
| 34 | #include <linux/io.h> |
| 35 | |
| 36 | #include <linux/spi/spi.h> |
| 37 | |
| 38 | #include <asm/arch/dma.h> |
| 39 | #include <asm/arch/clock.h> |
| 40 | |
| 41 | |
| 42 | #define OMAP2_MCSPI_MAX_FREQ 48000000 |
| 43 | |
| 44 | #define OMAP2_MCSPI_REVISION 0x00 |
| 45 | #define OMAP2_MCSPI_SYSCONFIG 0x10 |
| 46 | #define OMAP2_MCSPI_SYSSTATUS 0x14 |
| 47 | #define OMAP2_MCSPI_IRQSTATUS 0x18 |
| 48 | #define OMAP2_MCSPI_IRQENABLE 0x1c |
| 49 | #define OMAP2_MCSPI_WAKEUPENABLE 0x20 |
| 50 | #define OMAP2_MCSPI_SYST 0x24 |
| 51 | #define OMAP2_MCSPI_MODULCTRL 0x28 |
| 52 | |
| 53 | /* per-channel banks, 0x14 bytes each, first is: */ |
| 54 | #define OMAP2_MCSPI_CHCONF0 0x2c |
| 55 | #define OMAP2_MCSPI_CHSTAT0 0x30 |
| 56 | #define OMAP2_MCSPI_CHCTRL0 0x34 |
| 57 | #define OMAP2_MCSPI_TX0 0x38 |
| 58 | #define OMAP2_MCSPI_RX0 0x3c |
| 59 | |
| 60 | /* per-register bitmasks: */ |
| 61 | |
| 62 | #define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0) |
| 63 | #define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1) |
| 64 | |
| 65 | #define OMAP2_MCSPI_SYSSTATUS_RESETDONE (1 << 0) |
| 66 | |
| 67 | #define OMAP2_MCSPI_MODULCTRL_SINGLE (1 << 0) |
| 68 | #define OMAP2_MCSPI_MODULCTRL_MS (1 << 2) |
| 69 | #define OMAP2_MCSPI_MODULCTRL_STEST (1 << 3) |
| 70 | |
| 71 | #define OMAP2_MCSPI_CHCONF_PHA (1 << 0) |
| 72 | #define OMAP2_MCSPI_CHCONF_POL (1 << 1) |
| 73 | #define OMAP2_MCSPI_CHCONF_CLKD_MASK (0x0f << 2) |
| 74 | #define OMAP2_MCSPI_CHCONF_EPOL (1 << 6) |
| 75 | #define OMAP2_MCSPI_CHCONF_WL_MASK (0x1f << 7) |
| 76 | #define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY (0x01 << 12) |
| 77 | #define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY (0x02 << 12) |
| 78 | #define OMAP2_MCSPI_CHCONF_TRM_MASK (0x03 << 12) |
| 79 | #define OMAP2_MCSPI_CHCONF_DMAW (1 << 14) |
| 80 | #define OMAP2_MCSPI_CHCONF_DMAR (1 << 15) |
| 81 | #define OMAP2_MCSPI_CHCONF_DPE0 (1 << 16) |
| 82 | #define OMAP2_MCSPI_CHCONF_DPE1 (1 << 17) |
| 83 | #define OMAP2_MCSPI_CHCONF_IS (1 << 18) |
| 84 | #define OMAP2_MCSPI_CHCONF_TURBO (1 << 19) |
| 85 | #define OMAP2_MCSPI_CHCONF_FORCE (1 << 20) |
| 86 | |
| 87 | #define OMAP2_MCSPI_CHSTAT_RXS (1 << 0) |
| 88 | #define OMAP2_MCSPI_CHSTAT_TXS (1 << 1) |
| 89 | #define OMAP2_MCSPI_CHSTAT_EOT (1 << 2) |
| 90 | |
| 91 | #define OMAP2_MCSPI_CHCTRL_EN (1 << 0) |
| 92 | |
| 93 | |
| 94 | /* We have 2 DMA channels per CS, one for RX and one for TX */ |
| 95 | struct omap2_mcspi_dma { |
| 96 | int dma_tx_channel; |
| 97 | int dma_rx_channel; |
| 98 | |
| 99 | int dma_tx_sync_dev; |
| 100 | int dma_rx_sync_dev; |
| 101 | |
| 102 | struct completion dma_tx_completion; |
| 103 | struct completion dma_rx_completion; |
| 104 | }; |
| 105 | |
| 106 | /* use PIO for small transfers, avoiding DMA setup/teardown overhead and |
| 107 | * cache operations; better heuristics consider wordsize and bitrate. |
| 108 | */ |
| 109 | #define DMA_MIN_BYTES 8 |
| 110 | |
| 111 | |
| 112 | struct omap2_mcspi { |
| 113 | struct work_struct work; |
| 114 | /* lock protects queue and registers */ |
| 115 | spinlock_t lock; |
| 116 | struct list_head msg_queue; |
| 117 | struct spi_master *master; |
| 118 | struct clk *ick; |
| 119 | struct clk *fck; |
| 120 | /* Virtual base address of the controller */ |
| 121 | void __iomem *base; |
| 122 | /* SPI1 has 4 channels, while SPI2 has 2 */ |
| 123 | struct omap2_mcspi_dma *dma_channels; |
| 124 | }; |
| 125 | |
| 126 | struct omap2_mcspi_cs { |
| 127 | void __iomem *base; |
| 128 | int word_len; |
| 129 | }; |
| 130 | |
| 131 | static struct workqueue_struct *omap2_mcspi_wq; |
| 132 | |
| 133 | #define MOD_REG_BIT(val, mask, set) do { \ |
| 134 | if (set) \ |
| 135 | val |= mask; \ |
| 136 | else \ |
| 137 | val &= ~mask; \ |
| 138 | } while (0) |
| 139 | |
| 140 | static inline void mcspi_write_reg(struct spi_master *master, |
| 141 | int idx, u32 val) |
| 142 | { |
| 143 | struct omap2_mcspi *mcspi = spi_master_get_devdata(master); |
| 144 | |
| 145 | __raw_writel(val, mcspi->base + idx); |
| 146 | } |
| 147 | |
| 148 | static inline u32 mcspi_read_reg(struct spi_master *master, int idx) |
| 149 | { |
| 150 | struct omap2_mcspi *mcspi = spi_master_get_devdata(master); |
| 151 | |
| 152 | return __raw_readl(mcspi->base + idx); |
| 153 | } |
| 154 | |
| 155 | static inline void mcspi_write_cs_reg(const struct spi_device *spi, |
| 156 | int idx, u32 val) |
| 157 | { |
| 158 | struct omap2_mcspi_cs *cs = spi->controller_state; |
| 159 | |
| 160 | __raw_writel(val, cs->base + idx); |
| 161 | } |
| 162 | |
| 163 | static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx) |
| 164 | { |
| 165 | struct omap2_mcspi_cs *cs = spi->controller_state; |
| 166 | |
| 167 | return __raw_readl(cs->base + idx); |
| 168 | } |
| 169 | |
| 170 | static void omap2_mcspi_set_dma_req(const struct spi_device *spi, |
| 171 | int is_read, int enable) |
| 172 | { |
| 173 | u32 l, rw; |
| 174 | |
| 175 | l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); |
| 176 | |
| 177 | if (is_read) /* 1 is read, 0 write */ |
| 178 | rw = OMAP2_MCSPI_CHCONF_DMAR; |
| 179 | else |
| 180 | rw = OMAP2_MCSPI_CHCONF_DMAW; |
| 181 | |
| 182 | MOD_REG_BIT(l, rw, enable); |
| 183 | mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); |
| 184 | } |
| 185 | |
| 186 | static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable) |
| 187 | { |
| 188 | u32 l; |
| 189 | |
| 190 | l = enable ? OMAP2_MCSPI_CHCTRL_EN : 0; |
| 191 | mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, l); |
| 192 | } |
| 193 | |
| 194 | static void omap2_mcspi_force_cs(struct spi_device *spi, int cs_active) |
| 195 | { |
| 196 | u32 l; |
| 197 | |
| 198 | l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); |
| 199 | MOD_REG_BIT(l, OMAP2_MCSPI_CHCONF_FORCE, cs_active); |
| 200 | mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); |
| 201 | } |
| 202 | |
| 203 | static void omap2_mcspi_set_master_mode(struct spi_master *master) |
| 204 | { |
| 205 | u32 l; |
| 206 | |
| 207 | /* setup when switching from (reset default) slave mode |
| 208 | * to single-channel master mode |
| 209 | */ |
| 210 | l = mcspi_read_reg(master, OMAP2_MCSPI_MODULCTRL); |
| 211 | MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_STEST, 0); |
| 212 | MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_MS, 0); |
| 213 | MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_SINGLE, 1); |
| 214 | mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l); |
| 215 | } |
| 216 | |
| 217 | static unsigned |
| 218 | omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) |
| 219 | { |
| 220 | struct omap2_mcspi *mcspi; |
| 221 | struct omap2_mcspi_cs *cs = spi->controller_state; |
| 222 | struct omap2_mcspi_dma *mcspi_dma; |
| 223 | unsigned int count, c; |
| 224 | unsigned long base, tx_reg, rx_reg; |
| 225 | int word_len, data_type, element_count; |
| 226 | u8 * rx; |
| 227 | const u8 * tx; |
| 228 | |
| 229 | mcspi = spi_master_get_devdata(spi->master); |
| 230 | mcspi_dma = &mcspi->dma_channels[spi->chip_select]; |
| 231 | |
| 232 | count = xfer->len; |
| 233 | c = count; |
| 234 | word_len = cs->word_len; |
| 235 | |
| 236 | base = (unsigned long) io_v2p(cs->base); |
| 237 | tx_reg = base + OMAP2_MCSPI_TX0; |
| 238 | rx_reg = base + OMAP2_MCSPI_RX0; |
| 239 | rx = xfer->rx_buf; |
| 240 | tx = xfer->tx_buf; |
| 241 | |
| 242 | if (word_len <= 8) { |
| 243 | data_type = OMAP_DMA_DATA_TYPE_S8; |
| 244 | element_count = count; |
| 245 | } else if (word_len <= 16) { |
| 246 | data_type = OMAP_DMA_DATA_TYPE_S16; |
| 247 | element_count = count >> 1; |
| 248 | } else /* word_len <= 32 */ { |
| 249 | data_type = OMAP_DMA_DATA_TYPE_S32; |
| 250 | element_count = count >> 2; |
| 251 | } |
| 252 | |
| 253 | if (tx != NULL) { |
| 254 | omap_set_dma_transfer_params(mcspi_dma->dma_tx_channel, |
| 255 | data_type, element_count, 1, |
| 256 | OMAP_DMA_SYNC_ELEMENT, |
| 257 | mcspi_dma->dma_tx_sync_dev, 0); |
| 258 | |
| 259 | omap_set_dma_dest_params(mcspi_dma->dma_tx_channel, 0, |
| 260 | OMAP_DMA_AMODE_CONSTANT, |
| 261 | tx_reg, 0, 0); |
| 262 | |
| 263 | omap_set_dma_src_params(mcspi_dma->dma_tx_channel, 0, |
| 264 | OMAP_DMA_AMODE_POST_INC, |
| 265 | xfer->tx_dma, 0, 0); |
| 266 | } |
| 267 | |
| 268 | if (rx != NULL) { |
| 269 | omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel, |
| 270 | data_type, element_count, 1, |
| 271 | OMAP_DMA_SYNC_ELEMENT, |
| 272 | mcspi_dma->dma_rx_sync_dev, 1); |
| 273 | |
| 274 | omap_set_dma_src_params(mcspi_dma->dma_rx_channel, 0, |
| 275 | OMAP_DMA_AMODE_CONSTANT, |
| 276 | rx_reg, 0, 0); |
| 277 | |
| 278 | omap_set_dma_dest_params(mcspi_dma->dma_rx_channel, 0, |
| 279 | OMAP_DMA_AMODE_POST_INC, |
| 280 | xfer->rx_dma, 0, 0); |
| 281 | } |
| 282 | |
| 283 | if (tx != NULL) { |
| 284 | omap_start_dma(mcspi_dma->dma_tx_channel); |
| 285 | omap2_mcspi_set_dma_req(spi, 0, 1); |
| 286 | } |
| 287 | |
| 288 | if (rx != NULL) { |
| 289 | omap_start_dma(mcspi_dma->dma_rx_channel); |
| 290 | omap2_mcspi_set_dma_req(spi, 1, 1); |
| 291 | } |
| 292 | |
| 293 | if (tx != NULL) { |
| 294 | wait_for_completion(&mcspi_dma->dma_tx_completion); |
| 295 | dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE); |
| 296 | } |
| 297 | |
| 298 | if (rx != NULL) { |
| 299 | wait_for_completion(&mcspi_dma->dma_rx_completion); |
| 300 | dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE); |
| 301 | } |
| 302 | return count; |
| 303 | } |
| 304 | |
| 305 | static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) |
| 306 | { |
| 307 | unsigned long timeout; |
| 308 | |
| 309 | timeout = jiffies + msecs_to_jiffies(1000); |
| 310 | while (!(__raw_readl(reg) & bit)) { |
| 311 | if (time_after(jiffies, timeout)) |
| 312 | return -1; |
| 313 | cpu_relax(); |
| 314 | } |
| 315 | return 0; |
| 316 | } |
| 317 | |
| 318 | static unsigned |
| 319 | omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) |
| 320 | { |
| 321 | struct omap2_mcspi *mcspi; |
| 322 | struct omap2_mcspi_cs *cs = spi->controller_state; |
| 323 | unsigned int count, c; |
| 324 | u32 l; |
| 325 | void __iomem *base = cs->base; |
| 326 | void __iomem *tx_reg; |
| 327 | void __iomem *rx_reg; |
| 328 | void __iomem *chstat_reg; |
| 329 | int word_len; |
| 330 | |
| 331 | mcspi = spi_master_get_devdata(spi->master); |
| 332 | count = xfer->len; |
| 333 | c = count; |
| 334 | word_len = cs->word_len; |
| 335 | |
| 336 | l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); |
| 337 | l &= ~OMAP2_MCSPI_CHCONF_TRM_MASK; |
| 338 | |
| 339 | /* We store the pre-calculated register addresses on stack to speed |
| 340 | * up the transfer loop. */ |
| 341 | tx_reg = base + OMAP2_MCSPI_TX0; |
| 342 | rx_reg = base + OMAP2_MCSPI_RX0; |
| 343 | chstat_reg = base + OMAP2_MCSPI_CHSTAT0; |
| 344 | |
| 345 | if (word_len <= 8) { |
| 346 | u8 *rx; |
| 347 | const u8 *tx; |
| 348 | |
| 349 | rx = xfer->rx_buf; |
| 350 | tx = xfer->tx_buf; |
| 351 | |
| 352 | do { |
| 353 | if (tx != NULL) { |
| 354 | if (mcspi_wait_for_reg_bit(chstat_reg, |
| 355 | OMAP2_MCSPI_CHSTAT_TXS) < 0) { |
| 356 | dev_err(&spi->dev, "TXS timed out\n"); |
| 357 | goto out; |
| 358 | } |
| 359 | #ifdef VERBOSE |
| 360 | dev_dbg(&spi->dev, "write-%d %02x\n", |
| 361 | word_len, *tx); |
| 362 | #endif |
| 363 | __raw_writel(*tx++, tx_reg); |
| 364 | } |
| 365 | if (rx != NULL) { |
| 366 | if (mcspi_wait_for_reg_bit(chstat_reg, |
| 367 | OMAP2_MCSPI_CHSTAT_RXS) < 0) { |
| 368 | dev_err(&spi->dev, "RXS timed out\n"); |
| 369 | goto out; |
| 370 | } |
| 371 | /* prevent last RX_ONLY read from triggering |
| 372 | * more word i/o: switch to rx+tx |
| 373 | */ |
| 374 | if (c == 0 && tx == NULL) |
| 375 | mcspi_write_cs_reg(spi, |
| 376 | OMAP2_MCSPI_CHCONF0, l); |
| 377 | *rx++ = __raw_readl(rx_reg); |
| 378 | #ifdef VERBOSE |
| 379 | dev_dbg(&spi->dev, "read-%d %02x\n", |
| 380 | word_len, *(rx - 1)); |
| 381 | #endif |
| 382 | } |
| 383 | c -= 1; |
| 384 | } while (c); |
| 385 | } else if (word_len <= 16) { |
| 386 | u16 *rx; |
| 387 | const u16 *tx; |
| 388 | |
| 389 | rx = xfer->rx_buf; |
| 390 | tx = xfer->tx_buf; |
| 391 | do { |
| 392 | if (tx != NULL) { |
| 393 | if (mcspi_wait_for_reg_bit(chstat_reg, |
| 394 | OMAP2_MCSPI_CHSTAT_TXS) < 0) { |
| 395 | dev_err(&spi->dev, "TXS timed out\n"); |
| 396 | goto out; |
| 397 | } |
| 398 | #ifdef VERBOSE |
| 399 | dev_dbg(&spi->dev, "write-%d %04x\n", |
| 400 | word_len, *tx); |
| 401 | #endif |
| 402 | __raw_writel(*tx++, tx_reg); |
| 403 | } |
| 404 | if (rx != NULL) { |
| 405 | if (mcspi_wait_for_reg_bit(chstat_reg, |
| 406 | OMAP2_MCSPI_CHSTAT_RXS) < 0) { |
| 407 | dev_err(&spi->dev, "RXS timed out\n"); |
| 408 | goto out; |
| 409 | } |
| 410 | /* prevent last RX_ONLY read from triggering |
| 411 | * more word i/o: switch to rx+tx |
| 412 | */ |
| 413 | if (c == 0 && tx == NULL) |
| 414 | mcspi_write_cs_reg(spi, |
| 415 | OMAP2_MCSPI_CHCONF0, l); |
| 416 | *rx++ = __raw_readl(rx_reg); |
| 417 | #ifdef VERBOSE |
| 418 | dev_dbg(&spi->dev, "read-%d %04x\n", |
| 419 | word_len, *(rx - 1)); |
| 420 | #endif |
| 421 | } |
| 422 | c -= 2; |
| 423 | } while (c); |
| 424 | } else if (word_len <= 32) { |
| 425 | u32 *rx; |
| 426 | const u32 *tx; |
| 427 | |
| 428 | rx = xfer->rx_buf; |
| 429 | tx = xfer->tx_buf; |
| 430 | do { |
| 431 | if (tx != NULL) { |
| 432 | if (mcspi_wait_for_reg_bit(chstat_reg, |
| 433 | OMAP2_MCSPI_CHSTAT_TXS) < 0) { |
| 434 | dev_err(&spi->dev, "TXS timed out\n"); |
| 435 | goto out; |
| 436 | } |
| 437 | #ifdef VERBOSE |
| 438 | dev_dbg(&spi->dev, "write-%d %04x\n", |
| 439 | word_len, *tx); |
| 440 | #endif |
| 441 | __raw_writel(*tx++, tx_reg); |
| 442 | } |
| 443 | if (rx != NULL) { |
| 444 | if (mcspi_wait_for_reg_bit(chstat_reg, |
| 445 | OMAP2_MCSPI_CHSTAT_RXS) < 0) { |
| 446 | dev_err(&spi->dev, "RXS timed out\n"); |
| 447 | goto out; |
| 448 | } |
| 449 | /* prevent last RX_ONLY read from triggering |
| 450 | * more word i/o: switch to rx+tx |
| 451 | */ |
| 452 | if (c == 0 && tx == NULL) |
| 453 | mcspi_write_cs_reg(spi, |
| 454 | OMAP2_MCSPI_CHCONF0, l); |
| 455 | *rx++ = __raw_readl(rx_reg); |
| 456 | #ifdef VERBOSE |
| 457 | dev_dbg(&spi->dev, "read-%d %04x\n", |
| 458 | word_len, *(rx - 1)); |
| 459 | #endif |
| 460 | } |
| 461 | c -= 4; |
| 462 | } while (c); |
| 463 | } |
| 464 | |
| 465 | /* for TX_ONLY mode, be sure all words have shifted out */ |
| 466 | if (xfer->rx_buf == NULL) { |
| 467 | if (mcspi_wait_for_reg_bit(chstat_reg, |
| 468 | OMAP2_MCSPI_CHSTAT_TXS) < 0) { |
| 469 | dev_err(&spi->dev, "TXS timed out\n"); |
| 470 | } else if (mcspi_wait_for_reg_bit(chstat_reg, |
| 471 | OMAP2_MCSPI_CHSTAT_EOT) < 0) |
| 472 | dev_err(&spi->dev, "EOT timed out\n"); |
| 473 | } |
| 474 | out: |
| 475 | return count - c; |
| 476 | } |
| 477 | |
| 478 | /* called only when no transfer is active to this device */ |
| 479 | static int omap2_mcspi_setup_transfer(struct spi_device *spi, |
| 480 | struct spi_transfer *t) |
| 481 | { |
| 482 | struct omap2_mcspi_cs *cs = spi->controller_state; |
| 483 | struct omap2_mcspi *mcspi; |
| 484 | u32 l = 0, div = 0; |
| 485 | u8 word_len = spi->bits_per_word; |
| 486 | |
| 487 | mcspi = spi_master_get_devdata(spi->master); |
| 488 | |
| 489 | if (t != NULL && t->bits_per_word) |
| 490 | word_len = t->bits_per_word; |
| 491 | |
| 492 | cs->word_len = word_len; |
| 493 | |
| 494 | if (spi->max_speed_hz) { |
| 495 | while (div <= 15 && (OMAP2_MCSPI_MAX_FREQ / (1 << div)) |
| 496 | > spi->max_speed_hz) |
| 497 | div++; |
| 498 | } else |
| 499 | div = 15; |
| 500 | |
| 501 | l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); |
| 502 | |
| 503 | /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS |
| 504 | * REVISIT: this controller could support SPI_3WIRE mode. |
| 505 | */ |
| 506 | l &= ~(OMAP2_MCSPI_CHCONF_IS|OMAP2_MCSPI_CHCONF_DPE1); |
| 507 | l |= OMAP2_MCSPI_CHCONF_DPE0; |
| 508 | |
| 509 | /* wordlength */ |
| 510 | l &= ~OMAP2_MCSPI_CHCONF_WL_MASK; |
| 511 | l |= (word_len - 1) << 7; |
| 512 | |
| 513 | /* set chipselect polarity; manage with FORCE */ |
| 514 | if (!(spi->mode & SPI_CS_HIGH)) |
| 515 | l |= OMAP2_MCSPI_CHCONF_EPOL; /* active-low; normal */ |
| 516 | else |
| 517 | l &= ~OMAP2_MCSPI_CHCONF_EPOL; |
| 518 | |
| 519 | /* set clock divisor */ |
| 520 | l &= ~OMAP2_MCSPI_CHCONF_CLKD_MASK; |
| 521 | l |= div << 2; |
| 522 | |
| 523 | /* set SPI mode 0..3 */ |
| 524 | if (spi->mode & SPI_CPOL) |
| 525 | l |= OMAP2_MCSPI_CHCONF_POL; |
| 526 | else |
| 527 | l &= ~OMAP2_MCSPI_CHCONF_POL; |
| 528 | if (spi->mode & SPI_CPHA) |
| 529 | l |= OMAP2_MCSPI_CHCONF_PHA; |
| 530 | else |
| 531 | l &= ~OMAP2_MCSPI_CHCONF_PHA; |
| 532 | |
| 533 | mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); |
| 534 | |
| 535 | dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n", |
| 536 | OMAP2_MCSPI_MAX_FREQ / (1 << div), |
| 537 | (spi->mode & SPI_CPHA) ? "trailing" : "leading", |
| 538 | (spi->mode & SPI_CPOL) ? "inverted" : "normal"); |
| 539 | |
| 540 | return 0; |
| 541 | } |
| 542 | |
| 543 | static void omap2_mcspi_dma_rx_callback(int lch, u16 ch_status, void *data) |
| 544 | { |
| 545 | struct spi_device *spi = data; |
| 546 | struct omap2_mcspi *mcspi; |
| 547 | struct omap2_mcspi_dma *mcspi_dma; |
| 548 | |
| 549 | mcspi = spi_master_get_devdata(spi->master); |
| 550 | mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); |
| 551 | |
| 552 | complete(&mcspi_dma->dma_rx_completion); |
| 553 | |
| 554 | /* We must disable the DMA RX request */ |
| 555 | omap2_mcspi_set_dma_req(spi, 1, 0); |
| 556 | } |
| 557 | |
| 558 | static void omap2_mcspi_dma_tx_callback(int lch, u16 ch_status, void *data) |
| 559 | { |
| 560 | struct spi_device *spi = data; |
| 561 | struct omap2_mcspi *mcspi; |
| 562 | struct omap2_mcspi_dma *mcspi_dma; |
| 563 | |
| 564 | mcspi = spi_master_get_devdata(spi->master); |
| 565 | mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); |
| 566 | |
| 567 | complete(&mcspi_dma->dma_tx_completion); |
| 568 | |
| 569 | /* We must disable the DMA TX request */ |
| 570 | omap2_mcspi_set_dma_req(spi, 0, 0); |
| 571 | } |
| 572 | |
| 573 | static int omap2_mcspi_request_dma(struct spi_device *spi) |
| 574 | { |
| 575 | struct spi_master *master = spi->master; |
| 576 | struct omap2_mcspi *mcspi; |
| 577 | struct omap2_mcspi_dma *mcspi_dma; |
| 578 | |
| 579 | mcspi = spi_master_get_devdata(master); |
| 580 | mcspi_dma = mcspi->dma_channels + spi->chip_select; |
| 581 | |
| 582 | if (omap_request_dma(mcspi_dma->dma_rx_sync_dev, "McSPI RX", |
| 583 | omap2_mcspi_dma_rx_callback, spi, |
| 584 | &mcspi_dma->dma_rx_channel)) { |
| 585 | dev_err(&spi->dev, "no RX DMA channel for McSPI\n"); |
| 586 | return -EAGAIN; |
| 587 | } |
| 588 | |
| 589 | if (omap_request_dma(mcspi_dma->dma_tx_sync_dev, "McSPI TX", |
| 590 | omap2_mcspi_dma_tx_callback, spi, |
| 591 | &mcspi_dma->dma_tx_channel)) { |
| 592 | omap_free_dma(mcspi_dma->dma_rx_channel); |
| 593 | mcspi_dma->dma_rx_channel = -1; |
| 594 | dev_err(&spi->dev, "no TX DMA channel for McSPI\n"); |
| 595 | return -EAGAIN; |
| 596 | } |
| 597 | |
| 598 | init_completion(&mcspi_dma->dma_rx_completion); |
| 599 | init_completion(&mcspi_dma->dma_tx_completion); |
| 600 | |
| 601 | return 0; |
| 602 | } |
| 603 | |
| 604 | /* the spi->mode bits understood by this driver: */ |
| 605 | #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH) |
| 606 | |
| 607 | static int omap2_mcspi_setup(struct spi_device *spi) |
| 608 | { |
| 609 | int ret; |
| 610 | struct omap2_mcspi *mcspi; |
| 611 | struct omap2_mcspi_dma *mcspi_dma; |
| 612 | struct omap2_mcspi_cs *cs = spi->controller_state; |
| 613 | |
| 614 | if (spi->mode & ~MODEBITS) { |
| 615 | dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n", |
| 616 | spi->mode & ~MODEBITS); |
| 617 | return -EINVAL; |
| 618 | } |
| 619 | |
| 620 | if (spi->bits_per_word == 0) |
| 621 | spi->bits_per_word = 8; |
| 622 | else if (spi->bits_per_word < 4 || spi->bits_per_word > 32) { |
| 623 | dev_dbg(&spi->dev, "setup: unsupported %d bit words\n", |
| 624 | spi->bits_per_word); |
| 625 | return -EINVAL; |
| 626 | } |
| 627 | |
| 628 | mcspi = spi_master_get_devdata(spi->master); |
| 629 | mcspi_dma = &mcspi->dma_channels[spi->chip_select]; |
| 630 | |
| 631 | if (!cs) { |
| 632 | cs = kzalloc(sizeof *cs, GFP_KERNEL); |
| 633 | if (!cs) |
| 634 | return -ENOMEM; |
| 635 | cs->base = mcspi->base + spi->chip_select * 0x14; |
| 636 | spi->controller_state = cs; |
| 637 | } |
| 638 | |
| 639 | if (mcspi_dma->dma_rx_channel == -1 |
| 640 | || mcspi_dma->dma_tx_channel == -1) { |
| 641 | ret = omap2_mcspi_request_dma(spi); |
| 642 | if (ret < 0) |
| 643 | return ret; |
| 644 | } |
| 645 | |
| 646 | clk_enable(mcspi->ick); |
| 647 | clk_enable(mcspi->fck); |
| 648 | ret = omap2_mcspi_setup_transfer(spi, NULL); |
| 649 | clk_disable(mcspi->fck); |
| 650 | clk_disable(mcspi->ick); |
| 651 | |
| 652 | return ret; |
| 653 | } |
| 654 | |
| 655 | static void omap2_mcspi_cleanup(struct spi_device *spi) |
| 656 | { |
| 657 | struct omap2_mcspi *mcspi; |
| 658 | struct omap2_mcspi_dma *mcspi_dma; |
| 659 | |
| 660 | mcspi = spi_master_get_devdata(spi->master); |
| 661 | mcspi_dma = &mcspi->dma_channels[spi->chip_select]; |
| 662 | |
| 663 | kfree(spi->controller_state); |
| 664 | |
| 665 | if (mcspi_dma->dma_rx_channel != -1) { |
| 666 | omap_free_dma(mcspi_dma->dma_rx_channel); |
| 667 | mcspi_dma->dma_rx_channel = -1; |
| 668 | } |
| 669 | if (mcspi_dma->dma_tx_channel != -1) { |
| 670 | omap_free_dma(mcspi_dma->dma_tx_channel); |
| 671 | mcspi_dma->dma_tx_channel = -1; |
| 672 | } |
| 673 | } |
| 674 | |
| 675 | static void omap2_mcspi_work(struct work_struct *work) |
| 676 | { |
| 677 | struct omap2_mcspi *mcspi; |
| 678 | |
| 679 | mcspi = container_of(work, struct omap2_mcspi, work); |
| 680 | spin_lock_irq(&mcspi->lock); |
| 681 | |
| 682 | clk_enable(mcspi->ick); |
| 683 | clk_enable(mcspi->fck); |
| 684 | |
| 685 | /* We only enable one channel at a time -- the one whose message is |
| 686 | * at the head of the queue -- although this controller would gladly |
| 687 | * arbitrate among multiple channels. This corresponds to "single |
| 688 | * channel" master mode. As a side effect, we need to manage the |
| 689 | * chipselect with the FORCE bit ... CS != channel enable. |
| 690 | */ |
| 691 | while (!list_empty(&mcspi->msg_queue)) { |
| 692 | struct spi_message *m; |
| 693 | struct spi_device *spi; |
| 694 | struct spi_transfer *t = NULL; |
| 695 | int cs_active = 0; |
| 696 | struct omap2_mcspi_device_config *conf; |
| 697 | struct omap2_mcspi_cs *cs; |
| 698 | int par_override = 0; |
| 699 | int status = 0; |
| 700 | u32 chconf; |
| 701 | |
| 702 | m = container_of(mcspi->msg_queue.next, struct spi_message, |
| 703 | queue); |
| 704 | |
| 705 | list_del_init(&m->queue); |
| 706 | spin_unlock_irq(&mcspi->lock); |
| 707 | |
| 708 | spi = m->spi; |
| 709 | conf = spi->controller_data; |
| 710 | cs = spi->controller_state; |
| 711 | |
| 712 | omap2_mcspi_set_enable(spi, 1); |
| 713 | list_for_each_entry(t, &m->transfers, transfer_list) { |
| 714 | if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { |
| 715 | status = -EINVAL; |
| 716 | break; |
| 717 | } |
| 718 | if (par_override || t->speed_hz || t->bits_per_word) { |
| 719 | par_override = 1; |
| 720 | status = omap2_mcspi_setup_transfer(spi, t); |
| 721 | if (status < 0) |
| 722 | break; |
| 723 | if (!t->speed_hz && !t->bits_per_word) |
| 724 | par_override = 0; |
| 725 | } |
| 726 | |
| 727 | if (!cs_active) { |
| 728 | omap2_mcspi_force_cs(spi, 1); |
| 729 | cs_active = 1; |
| 730 | } |
| 731 | |
| 732 | chconf = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); |
| 733 | chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK; |
| 734 | if (t->tx_buf == NULL) |
| 735 | chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY; |
| 736 | else if (t->rx_buf == NULL) |
| 737 | chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY; |
| 738 | mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, chconf); |
| 739 | |
| 740 | if (t->len) { |
| 741 | unsigned count; |
| 742 | |
| 743 | /* RX_ONLY mode needs dummy data in TX reg */ |
| 744 | if (t->tx_buf == NULL) |
| 745 | __raw_writel(0, cs->base |
| 746 | + OMAP2_MCSPI_TX0); |
| 747 | |
| 748 | if (m->is_dma_mapped || t->len >= DMA_MIN_BYTES) |
| 749 | count = omap2_mcspi_txrx_dma(spi, t); |
| 750 | else |
| 751 | count = omap2_mcspi_txrx_pio(spi, t); |
| 752 | m->actual_length += count; |
| 753 | |
| 754 | if (count != t->len) { |
| 755 | status = -EIO; |
| 756 | break; |
| 757 | } |
| 758 | } |
| 759 | |
| 760 | if (t->delay_usecs) |
| 761 | udelay(t->delay_usecs); |
| 762 | |
| 763 | /* ignore the "leave it on after last xfer" hint */ |
| 764 | if (t->cs_change) { |
| 765 | omap2_mcspi_force_cs(spi, 0); |
| 766 | cs_active = 0; |
| 767 | } |
| 768 | } |
| 769 | |
| 770 | /* Restore defaults if they were overriden */ |
| 771 | if (par_override) { |
| 772 | par_override = 0; |
| 773 | status = omap2_mcspi_setup_transfer(spi, NULL); |
| 774 | } |
| 775 | |
| 776 | if (cs_active) |
| 777 | omap2_mcspi_force_cs(spi, 0); |
| 778 | |
| 779 | omap2_mcspi_set_enable(spi, 0); |
| 780 | |
| 781 | m->status = status; |
| 782 | m->complete(m->context); |
| 783 | |
| 784 | spin_lock_irq(&mcspi->lock); |
| 785 | } |
| 786 | |
| 787 | clk_disable(mcspi->fck); |
| 788 | clk_disable(mcspi->ick); |
| 789 | |
| 790 | spin_unlock_irq(&mcspi->lock); |
| 791 | } |
| 792 | |
| 793 | static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m) |
| 794 | { |
| 795 | struct omap2_mcspi *mcspi; |
| 796 | unsigned long flags; |
| 797 | struct spi_transfer *t; |
| 798 | |
| 799 | m->actual_length = 0; |
| 800 | m->status = 0; |
| 801 | |
| 802 | /* reject invalid messages and transfers */ |
| 803 | if (list_empty(&m->transfers) || !m->complete) |
| 804 | return -EINVAL; |
| 805 | list_for_each_entry(t, &m->transfers, transfer_list) { |
| 806 | const void *tx_buf = t->tx_buf; |
| 807 | void *rx_buf = t->rx_buf; |
| 808 | unsigned len = t->len; |
| 809 | |
| 810 | if (t->speed_hz > OMAP2_MCSPI_MAX_FREQ |
| 811 | || (len && !(rx_buf || tx_buf)) |
| 812 | || (t->bits_per_word && |
| 813 | ( t->bits_per_word < 4 |
| 814 | || t->bits_per_word > 32))) { |
| 815 | dev_dbg(&spi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n", |
| 816 | t->speed_hz, |
| 817 | len, |
| 818 | tx_buf ? "tx" : "", |
| 819 | rx_buf ? "rx" : "", |
| 820 | t->bits_per_word); |
| 821 | return -EINVAL; |
| 822 | } |
| 823 | if (t->speed_hz && t->speed_hz < OMAP2_MCSPI_MAX_FREQ/(1<<16)) { |
| 824 | dev_dbg(&spi->dev, "%d Hz max exceeds %d\n", |
| 825 | t->speed_hz, |
| 826 | OMAP2_MCSPI_MAX_FREQ/(1<<16)); |
| 827 | return -EINVAL; |
| 828 | } |
| 829 | |
| 830 | if (m->is_dma_mapped || len < DMA_MIN_BYTES) |
| 831 | continue; |
| 832 | |
| 833 | /* Do DMA mapping "early" for better error reporting and |
| 834 | * dcache use. Note that if dma_unmap_single() ever starts |
| 835 | * to do real work on ARM, we'd need to clean up mappings |
| 836 | * for previous transfers on *ALL* exits of this loop... |
| 837 | */ |
| 838 | if (tx_buf != NULL) { |
| 839 | t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf, |
| 840 | len, DMA_TO_DEVICE); |
| 841 | if (dma_mapping_error(t->tx_dma)) { |
| 842 | dev_dbg(&spi->dev, "dma %cX %d bytes error\n", |
| 843 | 'T', len); |
| 844 | return -EINVAL; |
| 845 | } |
| 846 | } |
| 847 | if (rx_buf != NULL) { |
| 848 | t->rx_dma = dma_map_single(&spi->dev, rx_buf, t->len, |
| 849 | DMA_FROM_DEVICE); |
| 850 | if (dma_mapping_error(t->rx_dma)) { |
| 851 | dev_dbg(&spi->dev, "dma %cX %d bytes error\n", |
| 852 | 'R', len); |
| 853 | if (tx_buf != NULL) |
| 854 | dma_unmap_single(NULL, t->tx_dma, |
| 855 | len, DMA_TO_DEVICE); |
| 856 | return -EINVAL; |
| 857 | } |
| 858 | } |
| 859 | } |
| 860 | |
| 861 | mcspi = spi_master_get_devdata(spi->master); |
| 862 | |
| 863 | spin_lock_irqsave(&mcspi->lock, flags); |
| 864 | list_add_tail(&m->queue, &mcspi->msg_queue); |
| 865 | queue_work(omap2_mcspi_wq, &mcspi->work); |
| 866 | spin_unlock_irqrestore(&mcspi->lock, flags); |
| 867 | |
| 868 | return 0; |
| 869 | } |
| 870 | |
| 871 | static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi) |
| 872 | { |
| 873 | struct spi_master *master = mcspi->master; |
| 874 | u32 tmp; |
| 875 | |
| 876 | clk_enable(mcspi->ick); |
| 877 | clk_enable(mcspi->fck); |
| 878 | |
| 879 | mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG, |
| 880 | OMAP2_MCSPI_SYSCONFIG_SOFTRESET); |
| 881 | do { |
| 882 | tmp = mcspi_read_reg(master, OMAP2_MCSPI_SYSSTATUS); |
| 883 | } while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE)); |
| 884 | |
| 885 | mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG, |
| 886 | /* (3 << 8) | (2 << 3) | */ |
| 887 | OMAP2_MCSPI_SYSCONFIG_AUTOIDLE); |
| 888 | |
| 889 | omap2_mcspi_set_master_mode(master); |
| 890 | |
| 891 | clk_disable(mcspi->fck); |
| 892 | clk_disable(mcspi->ick); |
| 893 | return 0; |
| 894 | } |
| 895 | |
| 896 | static u8 __initdata spi1_rxdma_id [] = { |
| 897 | OMAP24XX_DMA_SPI1_RX0, |
| 898 | OMAP24XX_DMA_SPI1_RX1, |
| 899 | OMAP24XX_DMA_SPI1_RX2, |
| 900 | OMAP24XX_DMA_SPI1_RX3, |
| 901 | }; |
| 902 | |
| 903 | static u8 __initdata spi1_txdma_id [] = { |
| 904 | OMAP24XX_DMA_SPI1_TX0, |
| 905 | OMAP24XX_DMA_SPI1_TX1, |
| 906 | OMAP24XX_DMA_SPI1_TX2, |
| 907 | OMAP24XX_DMA_SPI1_TX3, |
| 908 | }; |
| 909 | |
| 910 | static u8 __initdata spi2_rxdma_id[] = { |
| 911 | OMAP24XX_DMA_SPI2_RX0, |
| 912 | OMAP24XX_DMA_SPI2_RX1, |
| 913 | }; |
| 914 | |
| 915 | static u8 __initdata spi2_txdma_id[] = { |
| 916 | OMAP24XX_DMA_SPI2_TX0, |
| 917 | OMAP24XX_DMA_SPI2_TX1, |
| 918 | }; |
| 919 | |
| 920 | static int __init omap2_mcspi_probe(struct platform_device *pdev) |
| 921 | { |
| 922 | struct spi_master *master; |
| 923 | struct omap2_mcspi *mcspi; |
| 924 | struct resource *r; |
| 925 | int status = 0, i; |
| 926 | const u8 *rxdma_id, *txdma_id; |
| 927 | unsigned num_chipselect; |
| 928 | |
| 929 | switch (pdev->id) { |
| 930 | case 1: |
| 931 | rxdma_id = spi1_rxdma_id; |
| 932 | txdma_id = spi1_txdma_id; |
| 933 | num_chipselect = 4; |
| 934 | break; |
| 935 | case 2: |
| 936 | rxdma_id = spi2_rxdma_id; |
| 937 | txdma_id = spi2_txdma_id; |
| 938 | num_chipselect = 2; |
| 939 | break; |
| 940 | /* REVISIT omap2430 has a third McSPI ... */ |
| 941 | default: |
| 942 | return -EINVAL; |
| 943 | } |
| 944 | |
| 945 | master = spi_alloc_master(&pdev->dev, sizeof *mcspi); |
| 946 | if (master == NULL) { |
| 947 | dev_dbg(&pdev->dev, "master allocation failed\n"); |
| 948 | return -ENOMEM; |
| 949 | } |
| 950 | |
| 951 | if (pdev->id != -1) |
| 952 | master->bus_num = pdev->id; |
| 953 | |
| 954 | master->setup = omap2_mcspi_setup; |
| 955 | master->transfer = omap2_mcspi_transfer; |
| 956 | master->cleanup = omap2_mcspi_cleanup; |
| 957 | master->num_chipselect = num_chipselect; |
| 958 | |
| 959 | dev_set_drvdata(&pdev->dev, master); |
| 960 | |
| 961 | mcspi = spi_master_get_devdata(master); |
| 962 | mcspi->master = master; |
| 963 | |
| 964 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 965 | if (r == NULL) { |
| 966 | status = -ENODEV; |
| 967 | goto err1; |
| 968 | } |
| 969 | if (!request_mem_region(r->start, (r->end - r->start) + 1, |
| 970 | pdev->dev.bus_id)) { |
| 971 | status = -EBUSY; |
| 972 | goto err1; |
| 973 | } |
| 974 | |
| 975 | mcspi->base = (void __iomem *) io_p2v(r->start); |
| 976 | |
| 977 | INIT_WORK(&mcspi->work, omap2_mcspi_work); |
| 978 | |
| 979 | spin_lock_init(&mcspi->lock); |
| 980 | INIT_LIST_HEAD(&mcspi->msg_queue); |
| 981 | |
| 982 | mcspi->ick = clk_get(&pdev->dev, "mcspi_ick"); |
| 983 | if (IS_ERR(mcspi->ick)) { |
| 984 | dev_dbg(&pdev->dev, "can't get mcspi_ick\n"); |
| 985 | status = PTR_ERR(mcspi->ick); |
| 986 | goto err1a; |
| 987 | } |
| 988 | mcspi->fck = clk_get(&pdev->dev, "mcspi_fck"); |
| 989 | if (IS_ERR(mcspi->fck)) { |
| 990 | dev_dbg(&pdev->dev, "can't get mcspi_fck\n"); |
| 991 | status = PTR_ERR(mcspi->fck); |
| 992 | goto err2; |
| 993 | } |
| 994 | |
| 995 | mcspi->dma_channels = kcalloc(master->num_chipselect, |
| 996 | sizeof(struct omap2_mcspi_dma), |
| 997 | GFP_KERNEL); |
| 998 | |
| 999 | if (mcspi->dma_channels == NULL) |
| 1000 | goto err3; |
| 1001 | |
| 1002 | for (i = 0; i < num_chipselect; i++) { |
| 1003 | mcspi->dma_channels[i].dma_rx_channel = -1; |
| 1004 | mcspi->dma_channels[i].dma_rx_sync_dev = rxdma_id[i]; |
| 1005 | mcspi->dma_channels[i].dma_tx_channel = -1; |
| 1006 | mcspi->dma_channels[i].dma_tx_sync_dev = txdma_id[i]; |
| 1007 | } |
| 1008 | |
| 1009 | if (omap2_mcspi_reset(mcspi) < 0) |
| 1010 | goto err4; |
| 1011 | |
| 1012 | status = spi_register_master(master); |
| 1013 | if (status < 0) |
| 1014 | goto err4; |
| 1015 | |
| 1016 | return status; |
| 1017 | |
| 1018 | err4: |
| 1019 | kfree(mcspi->dma_channels); |
| 1020 | err3: |
| 1021 | clk_put(mcspi->fck); |
| 1022 | err2: |
| 1023 | clk_put(mcspi->ick); |
| 1024 | err1a: |
| 1025 | release_mem_region(r->start, (r->end - r->start) + 1); |
| 1026 | err1: |
| 1027 | spi_master_put(master); |
| 1028 | return status; |
| 1029 | } |
| 1030 | |
| 1031 | static int __exit omap2_mcspi_remove(struct platform_device *pdev) |
| 1032 | { |
| 1033 | struct spi_master *master; |
| 1034 | struct omap2_mcspi *mcspi; |
| 1035 | struct omap2_mcspi_dma *dma_channels; |
| 1036 | struct resource *r; |
| 1037 | |
| 1038 | master = dev_get_drvdata(&pdev->dev); |
| 1039 | mcspi = spi_master_get_devdata(master); |
| 1040 | dma_channels = mcspi->dma_channels; |
| 1041 | |
| 1042 | clk_put(mcspi->fck); |
| 1043 | clk_put(mcspi->ick); |
| 1044 | |
| 1045 | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 1046 | release_mem_region(r->start, (r->end - r->start) + 1); |
| 1047 | |
| 1048 | spi_unregister_master(master); |
| 1049 | kfree(dma_channels); |
| 1050 | |
| 1051 | return 0; |
| 1052 | } |
| 1053 | |
| 1054 | static struct platform_driver omap2_mcspi_driver = { |
| 1055 | .driver = { |
| 1056 | .name = "omap2_mcspi", |
| 1057 | .owner = THIS_MODULE, |
| 1058 | }, |
| 1059 | .remove = __exit_p(omap2_mcspi_remove), |
| 1060 | }; |
| 1061 | |
| 1062 | |
| 1063 | static int __init omap2_mcspi_init(void) |
| 1064 | { |
| 1065 | omap2_mcspi_wq = create_singlethread_workqueue( |
| 1066 | omap2_mcspi_driver.driver.name); |
| 1067 | if (omap2_mcspi_wq == NULL) |
| 1068 | return -1; |
| 1069 | return platform_driver_probe(&omap2_mcspi_driver, omap2_mcspi_probe); |
| 1070 | } |
| 1071 | subsys_initcall(omap2_mcspi_init); |
| 1072 | |
| 1073 | static void __exit omap2_mcspi_exit(void) |
| 1074 | { |
| 1075 | platform_driver_unregister(&omap2_mcspi_driver); |
| 1076 | |
| 1077 | destroy_workqueue(omap2_mcspi_wq); |
| 1078 | } |
| 1079 | module_exit(omap2_mcspi_exit); |
| 1080 | |
| 1081 | MODULE_LICENSE("GPL"); |