blob: f75a66e7d312a8e1efed3d2db37ba1c554785e94 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Block device driver configuration
3#
4
Jan Engelhardtafd44032007-07-17 04:06:11 -07005menuconfig MD
Linus Torvalds1da177e2005-04-16 15:20:36 -07006 bool "Multiple devices driver support (RAID and LVM)"
Jan Engelhardtafd44032007-07-17 04:06:11 -07007 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07008 help
9 Support multiple physical spindles through a single logical device.
10 Required for RAID and logical volume management.
11
Jan Engelhardtafd44032007-07-17 04:06:11 -070012if MD
13
Linus Torvalds1da177e2005-04-16 15:20:36 -070014config BLK_DEV_MD
15 tristate "RAID support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070016 ---help---
17 This driver lets you combine several hard disk partitions into one
18 logical block device. This can be used to simply append one
19 partition to another one or to combine several redundant hard disks
20 into a RAID1/4/5 device so as to provide protection against hard
21 disk failures. This is called "Software RAID" since the combining of
22 the partitions is done by the kernel. "Hardware RAID" means that the
23 combining is done by a dedicated controller; if you have such a
24 controller, you do not need to say Y here.
25
26 More information about Software RAID on Linux is contained in the
27 Software RAID mini-HOWTO, available from
28 <http://www.tldp.org/docs.html#howto>. There you will also learn
29 where to get the supporting user space utilities raidtools.
30
31 If unsure, say N.
32
Arjan van de Vena3640922008-09-21 15:44:32 -070033config MD_AUTODETECT
34 bool "Autodetect RAID arrays during kernel boot"
Alan Jenkinsce52aeb2008-10-10 16:02:53 +010035 depends on BLK_DEV_MD=y
Arjan van de Vena3640922008-09-21 15:44:32 -070036 default y
37 ---help---
38 If you say Y here, then the kernel will try to autodetect raid
39 arrays as part of its boot process.
40
41 If you don't use raid and say Y, this autodetection can cause
42 a several-second delay in the boot time due to various
43 synchronisation steps that are part of this step.
44
45 If unsure, say Y.
46
Linus Torvalds1da177e2005-04-16 15:20:36 -070047config MD_LINEAR
48 tristate "Linear (append) mode"
49 depends on BLK_DEV_MD
50 ---help---
51 If you say Y here, then your multiple devices driver will be able to
52 use the so-called linear mode, i.e. it will combine the hard disk
53 partitions by simply appending one to the other.
54
55 To compile this as a module, choose M here: the module
56 will be called linear.
57
58 If unsure, say Y.
59
60config MD_RAID0
61 tristate "RAID-0 (striping) mode"
62 depends on BLK_DEV_MD
63 ---help---
64 If you say Y here, then your multiple devices driver will be able to
65 use the so-called raid0 mode, i.e. it will combine the hard disk
66 partitions into one logical device in such a fashion as to fill them
67 up evenly, one chunk here and one chunk there. This will increase
68 the throughput rate if the partitions reside on distinct disks.
69
70 Information about Software RAID on Linux is contained in the
71 Software-RAID mini-HOWTO, available from
72 <http://www.tldp.org/docs.html#howto>. There you will also
73 learn where to get the supporting user space utilities raidtools.
74
75 To compile this as a module, choose M here: the module
76 will be called raid0.
77
78 If unsure, say Y.
79
80config MD_RAID1
81 tristate "RAID-1 (mirroring) mode"
82 depends on BLK_DEV_MD
83 ---help---
84 A RAID-1 set consists of several disk drives which are exact copies
85 of each other. In the event of a mirror failure, the RAID driver
86 will continue to use the operational mirrors in the set, providing
87 an error free MD (multiple device) to the higher levels of the
88 kernel. In a set with N drives, the available space is the capacity
89 of a single drive, and the set protects against a failure of (N - 1)
90 drives.
91
92 Information about Software RAID on Linux is contained in the
93 Software-RAID mini-HOWTO, available from
94 <http://www.tldp.org/docs.html#howto>. There you will also
95 learn where to get the supporting user space utilities raidtools.
96
97 If you want to use such a RAID-1 set, say Y. To compile this code
98 as a module, choose M here: the module will be called raid1.
99
100 If unsure, say Y.
101
102config MD_RAID10
NeilBrown08fb7302010-05-03 13:16:56 +1000103 tristate "RAID-10 (mirrored striping) mode"
104 depends on BLK_DEV_MD
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105 ---help---
106 RAID-10 provides a combination of striping (RAID-0) and
Justin Piszcz4d2554d2006-06-26 00:27:50 -0700107 mirroring (RAID-1) with easier configuration and more flexible
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108 layout.
109 Unlike RAID-0, but like RAID-1, RAID-10 requires all devices to
110 be the same size (or at least, only as much as the smallest device
111 will be used).
112 RAID-10 provides a variety of layouts that provide different levels
113 of redundancy and performance.
114
115 RAID-10 requires mdadm-1.7.0 or later, available at:
116
117 ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/
118
119 If unsure, say Y.
120
NeilBrown16a53ec2006-06-26 00:27:38 -0700121config MD_RAID456
122 tristate "RAID-4/RAID-5/RAID-6 mode"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700123 depends on BLK_DEV_MD
David Woodhousef5e70d02009-07-13 11:35:12 +0100124 select RAID6_PQ
Dan Williams9bc89cd2007-01-02 11:10:44 -0700125 select ASYNC_MEMCPY
126 select ASYNC_XOR
Dan Williamsac6b53b2009-07-14 13:40:19 -0700127 select ASYNC_PQ
128 select ASYNC_RAID6_RECOV
Linus Torvalds1da177e2005-04-16 15:20:36 -0700129 ---help---
130 A RAID-5 set of N drives with a capacity of C MB per drive provides
131 the capacity of C * (N - 1) MB, and protects against a failure
132 of a single drive. For a given sector (row) number, (N - 1) drives
133 contain data sectors, and one drive contains the parity protection.
134 For a RAID-4 set, the parity blocks are present on a single drive,
135 while a RAID-5 set distributes the parity across the drives in one
136 of the available parity distribution methods.
137
NeilBrown16a53ec2006-06-26 00:27:38 -0700138 A RAID-6 set of N drives with a capacity of C MB per drive
139 provides the capacity of C * (N - 2) MB, and protects
140 against a failure of any two drives. For a given sector
141 (row) number, (N - 2) drives contain data sectors, and two
142 drives contains two independent redundancy syndromes. Like
143 RAID-5, RAID-6 distributes the syndromes across the drives
144 in one of the available parity distribution methods.
145
Linus Torvalds1da177e2005-04-16 15:20:36 -0700146 Information about Software RAID on Linux is contained in the
147 Software-RAID mini-HOWTO, available from
148 <http://www.tldp.org/docs.html#howto>. There you will also
149 learn where to get the supporting user space utilities raidtools.
150
NeilBrown16a53ec2006-06-26 00:27:38 -0700151 If you want to use such a RAID-4/RAID-5/RAID-6 set, say Y. To
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152 compile this code as a module, choose M here: the module
NeilBrown16a53ec2006-06-26 00:27:38 -0700153 will be called raid456.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154
155 If unsure, say Y.
156
Dan Williams07a3b412009-08-29 19:13:13 -0700157config MULTICORE_RAID456
158 bool "RAID-4/RAID-5/RAID-6 Multicore processing (EXPERIMENTAL)"
159 depends on MD_RAID456
160 depends on SMP
161 depends on EXPERIMENTAL
162 ---help---
163 Enable the raid456 module to dispatch per-stripe raid operations to a
164 thread pool.
165
166 If unsure, say N.
167
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168config MD_MULTIPATH
169 tristate "Multipath I/O support"
170 depends on BLK_DEV_MD
171 help
NeilBrown93bd89a2009-12-14 12:49:59 +1100172 MD_MULTIPATH provides a simple multi-path personality for use
173 the MD framework. It is not under active development. New
174 projects should consider using DM_MULTIPATH which has more
175 features and more testing.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176
177 If unsure, say N.
178
179config MD_FAULTY
180 tristate "Faulty test module for MD"
181 depends on BLK_DEV_MD
182 help
183 The "faulty" module allows for a block device that occasionally returns
184 read or write errors. It is useful for testing.
185
186 In unsure, say N.
187
188config BLK_DEV_DM
189 tristate "Device mapper support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700190 ---help---
191 Device-mapper is a low level volume manager. It works by allowing
192 people to specify mappings for ranges of logical sectors. Various
193 mapping types are available, in addition people may write their own
194 modules containing custom mappings if they wish.
195
196 Higher level volume managers such as LVM2 use this driver.
197
198 To compile this as a module, choose M here: the module will be
199 called dm-mod.
200
201 If unsure, say N.
202
Bryn Reevescc109202006-10-03 01:15:35 -0700203config DM_DEBUG
204 boolean "Device mapper debugging support"
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000205 depends on BLK_DEV_DM
Bryn Reevescc109202006-10-03 01:15:35 -0700206 ---help---
207 Enable this for messages that may help debug device-mapper problems.
208
209 If unsure, say N.
210
Linus Torvalds1da177e2005-04-16 15:20:36 -0700211config DM_CRYPT
212 tristate "Crypt target support"
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000213 depends on BLK_DEV_DM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700214 select CRYPTO
Herbert Xu32632632006-12-10 09:50:36 +1100215 select CRYPTO_CBC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700216 ---help---
217 This device-mapper target allows you to create a device that
218 transparently encrypts the data on it. You'll need to activate
219 the ciphers you're going to use in the cryptoapi configuration.
220
221 Information on how to use dm-crypt can be found on
222
223 <http://www.saout.de/misc/dm-crypt/>
224
225 To compile this code as a module, choose M here: the module will
226 be called dm-crypt.
227
228 If unsure, say N.
229
230config DM_SNAPSHOT
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000231 tristate "Snapshot target"
232 depends on BLK_DEV_DM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700233 ---help---
Justin Piszcz4d2554d2006-06-26 00:27:50 -0700234 Allow volume managers to take writable snapshots of a device.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700235
236config DM_MIRROR
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000237 tristate "Mirror target"
238 depends on BLK_DEV_DM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700239 ---help---
240 Allow volume managers to mirror logical volumes, also
241 needed for live data migration tools such as 'pvmove'.
242
NeilBrown9d09e662011-01-13 20:00:02 +0000243config DM_RAID
Jonathan Brassowb12d4372011-08-02 12:32:07 +0100244 tristate "RAID 1/4/5/6 target (EXPERIMENTAL)"
NeilBrown9d09e662011-01-13 20:00:02 +0000245 depends on BLK_DEV_DM && EXPERIMENTAL
Jonathan Brassowb12d4372011-08-02 12:32:07 +0100246 select MD_RAID1
NeilBrown9d09e662011-01-13 20:00:02 +0000247 select MD_RAID456
248 select BLK_DEV_MD
249 ---help---
Jonathan Brassowb12d4372011-08-02 12:32:07 +0100250 A dm target that supports RAID1, RAID4, RAID5 and RAID6 mappings
NeilBrown9d09e662011-01-13 20:00:02 +0000251
252 A RAID-5 set of N drives with a capacity of C MB per drive provides
253 the capacity of C * (N - 1) MB, and protects against a failure
254 of a single drive. For a given sector (row) number, (N - 1) drives
255 contain data sectors, and one drive contains the parity protection.
256 For a RAID-4 set, the parity blocks are present on a single drive,
257 while a RAID-5 set distributes the parity across the drives in one
258 of the available parity distribution methods.
259
260 A RAID-6 set of N drives with a capacity of C MB per drive
261 provides the capacity of C * (N - 2) MB, and protects
262 against a failure of any two drives. For a given sector
263 (row) number, (N - 2) drives contain data sectors, and two
264 drives contains two independent redundancy syndromes. Like
265 RAID-5, RAID-6 distributes the syndromes across the drives
266 in one of the available parity distribution methods.
267
Jonthan Brassowf5db4af2009-06-22 10:12:35 +0100268config DM_LOG_USERSPACE
269 tristate "Mirror userspace logging (EXPERIMENTAL)"
270 depends on DM_MIRROR && EXPERIMENTAL && NET
271 select CONNECTOR
272 ---help---
273 The userspace logging module provides a mechanism for
274 relaying the dm-dirty-log API to userspace. Log designs
275 which are more suited to userspace implementation (e.g.
276 shared storage logs) or experimental logs can be implemented
277 by leveraging this framework.
278
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279config DM_ZERO
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000280 tristate "Zero target"
281 depends on BLK_DEV_DM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282 ---help---
283 A target that discards writes, and returns all zeroes for
284 reads. Useful in some recovery situations.
285
286config DM_MULTIPATH
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000287 tristate "Multipath target"
288 depends on BLK_DEV_DM
Chandra Seetharamanfe9233f2008-05-23 18:16:40 -0700289 # nasty syntax but means make DM_MULTIPATH independent
290 # of SCSI_DH if the latter isn't defined but if
291 # it is, DM_MULTIPATH must depend on it. We get a build
292 # error if SCSI_DH=m and DM_MULTIPATH=y
293 depends on SCSI_DH || !SCSI_DH
Linus Torvalds1da177e2005-04-16 15:20:36 -0700294 ---help---
295 Allow volume managers to support multipath hardware.
296
Kiyoshi Uedafd5e0332009-06-22 10:12:27 +0100297config DM_MULTIPATH_QL
298 tristate "I/O Path Selector based on the number of in-flight I/Os"
299 depends on DM_MULTIPATH
300 ---help---
301 This path selector is a dynamic load balancer which selects
302 the path with the least number of in-flight I/Os.
303
304 If unsure, say N.
305
Kiyoshi Uedaf392ba82009-06-22 10:12:28 +0100306config DM_MULTIPATH_ST
307 tristate "I/O Path Selector based on the service time"
308 depends on DM_MULTIPATH
309 ---help---
310 This path selector is a dynamic load balancer which selects
311 the path expected to complete the incoming I/O in the shortest
312 time.
313
314 If unsure, say N.
315
Heinz Mauelshagen26b9f222007-05-09 02:33:06 -0700316config DM_DELAY
317 tristate "I/O delaying target (EXPERIMENTAL)"
318 depends on BLK_DEV_DM && EXPERIMENTAL
319 ---help---
320 A target that delays reads and/or writes and can send
321 them to different devices. Useful for testing.
322
323 If unsure, say N.
324
Mike Anderson51e5b2b2007-10-19 22:48:00 +0100325config DM_UEVENT
326 bool "DM uevents (EXPERIMENTAL)"
327 depends on BLK_DEV_DM && EXPERIMENTAL
328 ---help---
329 Generate udev events for DM events.
330
Josef Bacik3407ef52011-03-24 13:54:24 +0000331config DM_FLAKEY
332 tristate "Flakey target (EXPERIMENTAL)"
333 depends on BLK_DEV_DM && EXPERIMENTAL
334 ---help---
335 A target that intermittently fails I/O for debugging purposes.
336
Jan Engelhardtafd44032007-07-17 04:06:11 -0700337endif # MD