blob: 5821e1fbce084c9dfe2cf6f9975441245144b9cc [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * in2000.h - Linux device driver definitions for the
3 * Always IN2000 ISA SCSI card.
4 *
5 * IMPORTANT: This file is for version 1.33 - 26/Aug/1998
6 *
7 * Copyright (c) 1996 John Shifflett, GeoLog Consulting
8 * john@geolog.com
9 * jshiffle@netcom.com
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2, or (at your option)
14 * any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 */
22
23#ifndef IN2000_H
24#define IN2000_H
25
26#include <asm/io.h>
27
28#define PROC_INTERFACE /* add code for /proc/scsi/in2000/xxx interface */
29#ifdef PROC_INTERFACE
30#define PROC_STATISTICS /* add code for keeping various real time stats */
31#endif
32
33#define SYNC_DEBUG /* extra info on sync negotiation printed */
34#define DEBUGGING_ON /* enable command-line debugging bitmask */
35#define DEBUG_DEFAULTS 0 /* default bitmask - change from command-line */
36
37#ifdef __i386__
38#define FAST_READ_IO /* No problems with these on my machine */
39#define FAST_WRITE_IO
40#endif
41
42#ifdef DEBUGGING_ON
43#define DB(f,a) if (hostdata->args & (f)) a;
44#define CHECK_NULL(p,s) /* if (!(p)) {printk("\n"); while (1) printk("NP:%s\r",(s));} */
45#else
46#define DB(f,a)
47#define CHECK_NULL(p,s)
48#endif
49
50#define uchar unsigned char
51
52#define read1_io(a) (inb(hostdata->io_base+(a)))
53#define read2_io(a) (inw(hostdata->io_base+(a)))
54#define write1_io(b,a) (outb((b),hostdata->io_base+(a)))
55#define write2_io(w,a) (outw((w),hostdata->io_base+(a)))
56
57#ifdef __i386__
58/* These inline assembly defines are derived from a patch
59 * sent to me by Bill Earnest. He's done a lot of very
60 * valuable thinking, testing, and coding during his effort
61 * to squeeze more speed out of this driver. I really think
62 * that we are doing IO at close to the maximum now with
63 * the fifo. (And yes, insw uses 'edi' while outsw uses
64 * 'esi'. Thanks Bill!)
65 */
66
67#define FAST_READ2_IO() \
68({ \
69int __dummy_1,__dummy_2; \
70 __asm__ __volatile__ ("\n \
71 cld \n \
72 orl %%ecx, %%ecx \n \
73 jz 1f \n \
74 rep \n \
75 insw (%%dx),%%es:(%%edi) \n \
761: " \
77 : "=D" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2) /* output */ \
78 : "2" (f), "0" (sp), "1" (i) /* input */ \
79 ); /* trashed */ \
80})
81
82#define FAST_WRITE2_IO() \
83({ \
84int __dummy_1,__dummy_2; \
85 __asm__ __volatile__ ("\n \
86 cld \n \
87 orl %%ecx, %%ecx \n \
88 jz 1f \n \
89 rep \n \
90 outsw %%ds:(%%esi),(%%dx) \n \
911: " \
92 : "=S" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2)/* output */ \
93 : "2" (f), "0" (sp), "1" (i) /* input */ \
94 ); /* trashed */ \
95})
96#endif
97
98/* IN2000 io_port offsets */
99#define IO_WD_ASR 0x00 /* R - 3393 auxstat reg */
100#define ASR_INT 0x80
101#define ASR_LCI 0x40
102#define ASR_BSY 0x20
103#define ASR_CIP 0x10
104#define ASR_PE 0x02
105#define ASR_DBR 0x01
106#define IO_WD_ADDR 0x00 /* W - 3393 address reg */
107#define IO_WD_DATA 0x01 /* R/W - rest of 3393 regs */
108#define IO_FIFO 0x02 /* R/W - in2000 dual-port fifo (16 bits) */
109#define IN2000_FIFO_SIZE 2048 /* fifo capacity in bytes */
110#define IO_CARD_RESET 0x03 /* W - in2000 start master reset */
111#define IO_FIFO_COUNT 0x04 /* R - in2000 fifo counter */
112#define IO_FIFO_WRITE 0x05 /* W - clear fifo counter, start write */
113#define IO_FIFO_READ 0x07 /* W - start fifo read */
114#define IO_LED_OFF 0x08 /* W - turn off in2000 activity LED */
115#define IO_SWITCHES 0x08 /* R - read in2000 dip switch */
116#define SW_ADDR0 0x01 /* bit 0 = bit 0 of index to io addr */
117#define SW_ADDR1 0x02 /* bit 1 = bit 1 of index io addr */
118#define SW_DISINT 0x04 /* bit 2 true if ints disabled */
119#define SW_INT0 0x08 /* bit 3 = bit 0 of index to interrupt */
120#define SW_INT1 0x10 /* bit 4 = bit 1 of index to interrupt */
121#define SW_INT_SHIFT 3 /* shift right this amount to right justify int bits */
122#define SW_SYNC_DOS5 0x20 /* bit 5 used by Always BIOS */
123#define SW_FLOPPY 0x40 /* bit 6 true if floppy enabled */
124#define SW_BIT7 0x80 /* bit 7 hardwired true (ground) */
125#define IO_LED_ON 0x09 /* W - turn on in2000 activity LED */
126#define IO_HARDWARE 0x0a /* R - read in2000 hardware rev, stop reset */
127#define IO_INTR_MASK 0x0c /* W - in2000 interrupt mask reg */
128#define IMASK_WD 0x01 /* WD33c93 interrupt mask */
129#define IMASK_FIFO 0x02 /* FIFO interrupt mask */
130
131/* wd register names */
132#define WD_OWN_ID 0x00
133#define WD_CONTROL 0x01
134#define WD_TIMEOUT_PERIOD 0x02
135#define WD_CDB_1 0x03
136#define WD_CDB_2 0x04
137#define WD_CDB_3 0x05
138#define WD_CDB_4 0x06
139#define WD_CDB_5 0x07
140#define WD_CDB_6 0x08
141#define WD_CDB_7 0x09
142#define WD_CDB_8 0x0a
143#define WD_CDB_9 0x0b
144#define WD_CDB_10 0x0c
145#define WD_CDB_11 0x0d
146#define WD_CDB_12 0x0e
147#define WD_TARGET_LUN 0x0f
148#define WD_COMMAND_PHASE 0x10
149#define WD_SYNCHRONOUS_TRANSFER 0x11
150#define WD_TRANSFER_COUNT_MSB 0x12
151#define WD_TRANSFER_COUNT 0x13
152#define WD_TRANSFER_COUNT_LSB 0x14
153#define WD_DESTINATION_ID 0x15
154#define WD_SOURCE_ID 0x16
155#define WD_SCSI_STATUS 0x17
156#define WD_COMMAND 0x18
157#define WD_DATA 0x19
158#define WD_QUEUE_TAG 0x1a
159#define WD_AUXILIARY_STATUS 0x1f
160
161/* WD commands */
162#define WD_CMD_RESET 0x00
163#define WD_CMD_ABORT 0x01
164#define WD_CMD_ASSERT_ATN 0x02
165#define WD_CMD_NEGATE_ACK 0x03
166#define WD_CMD_DISCONNECT 0x04
167#define WD_CMD_RESELECT 0x05
168#define WD_CMD_SEL_ATN 0x06
169#define WD_CMD_SEL 0x07
170#define WD_CMD_SEL_ATN_XFER 0x08
171#define WD_CMD_SEL_XFER 0x09
172#define WD_CMD_RESEL_RECEIVE 0x0a
173#define WD_CMD_RESEL_SEND 0x0b
174#define WD_CMD_WAIT_SEL_RECEIVE 0x0c
175#define WD_CMD_TRANS_ADDR 0x18
176#define WD_CMD_TRANS_INFO 0x20
177#define WD_CMD_TRANSFER_PAD 0x21
178#define WD_CMD_SBT_MODE 0x80
179
180/* SCSI Bus Phases */
181#define PHS_DATA_OUT 0x00
182#define PHS_DATA_IN 0x01
183#define PHS_COMMAND 0x02
184#define PHS_STATUS 0x03
185#define PHS_MESS_OUT 0x06
186#define PHS_MESS_IN 0x07
187
188/* Command Status Register definitions */
189
190 /* reset state interrupts */
191#define CSR_RESET 0x00
192#define CSR_RESET_AF 0x01
193
194 /* successful completion interrupts */
195#define CSR_RESELECT 0x10
196#define CSR_SELECT 0x11
197#define CSR_SEL_XFER_DONE 0x16
198#define CSR_XFER_DONE 0x18
199
200 /* paused or aborted interrupts */
201#define CSR_MSGIN 0x20
202#define CSR_SDP 0x21
203#define CSR_SEL_ABORT 0x22
204#define CSR_RESEL_ABORT 0x25
205#define CSR_RESEL_ABORT_AM 0x27
206#define CSR_ABORT 0x28
207
208 /* terminated interrupts */
209#define CSR_INVALID 0x40
210#define CSR_UNEXP_DISC 0x41
211#define CSR_TIMEOUT 0x42
212#define CSR_PARITY 0x43
213#define CSR_PARITY_ATN 0x44
214#define CSR_BAD_STATUS 0x45
215#define CSR_UNEXP 0x48
216
217 /* service required interrupts */
218#define CSR_RESEL 0x80
219#define CSR_RESEL_AM 0x81
220#define CSR_DISC 0x85
221#define CSR_SRV_REQ 0x88
222
223 /* Own ID/CDB Size register */
224#define OWNID_EAF 0x08
225#define OWNID_EHP 0x10
226#define OWNID_RAF 0x20
227#define OWNID_FS_8 0x00
228#define OWNID_FS_12 0x40
229#define OWNID_FS_16 0x80
230
231 /* Control register */
232#define CTRL_HSP 0x01
233#define CTRL_HA 0x02
234#define CTRL_IDI 0x04
235#define CTRL_EDI 0x08
236#define CTRL_HHP 0x10
237#define CTRL_POLLED 0x00
238#define CTRL_BURST 0x20
239#define CTRL_BUS 0x40
240#define CTRL_DMA 0x80
241
242 /* Timeout Period register */
243#define TIMEOUT_PERIOD_VALUE 20 /* results in 200 ms. */
244
245 /* Synchronous Transfer Register */
246#define STR_FSS 0x80
247
248 /* Destination ID register */
249#define DSTID_DPD 0x40
250#define DATA_OUT_DIR 0
251#define DATA_IN_DIR 1
252#define DSTID_SCC 0x80
253
254 /* Source ID register */
255#define SRCID_MASK 0x07
256#define SRCID_SIV 0x08
257#define SRCID_DSP 0x20
258#define SRCID_ES 0x40
259#define SRCID_ER 0x80
260
261
262
263#define ILLEGAL_STATUS_BYTE 0xff
264
265
266#define DEFAULT_SX_PER 500 /* (ns) fairly safe */
267#define DEFAULT_SX_OFF 0 /* aka async */
268
269#define OPTIMUM_SX_PER 252 /* (ns) best we can do (mult-of-4) */
270#define OPTIMUM_SX_OFF 12 /* size of in2000 fifo */
271
272struct sx_period {
273 unsigned int period_ns;
274 uchar reg_value;
275 };
276
277
278struct IN2000_hostdata {
279 struct Scsi_Host *next;
280 uchar chip; /* what kind of wd33c93 chip? */
281 uchar microcode; /* microcode rev if 'B' */
282 unsigned short io_base; /* IO port base */
283 unsigned int dip_switch; /* dip switch settings */
284 unsigned int hrev; /* hardware revision of card */
285 volatile uchar busy[8]; /* index = target, bit = lun */
286 volatile Scsi_Cmnd *input_Q; /* commands waiting to be started */
287 volatile Scsi_Cmnd *selecting; /* trying to select this command */
288 volatile Scsi_Cmnd *connected; /* currently connected command */
289 volatile Scsi_Cmnd *disconnected_Q;/* commands waiting for reconnect */
290 uchar state; /* what we are currently doing */
291 uchar fifo; /* what the FIFO is up to */
292 uchar level2; /* extent to which Level-2 commands are used */
293 uchar disconnect; /* disconnect/reselect policy */
294 unsigned int args; /* set from command-line argument */
295 uchar incoming_msg[8]; /* filled during message_in phase */
296 int incoming_ptr; /* mainly used with EXTENDED messages */
297 uchar outgoing_msg[8]; /* send this during next message_out */
298 int outgoing_len; /* length of outgoing message */
299 unsigned int default_sx_per; /* default transfer period for SCSI bus */
300 uchar sync_xfer[8]; /* sync_xfer reg settings per target */
301 uchar sync_stat[8]; /* status of sync negotiation per target */
302 uchar sync_off; /* bit mask: don't use sync with these targets */
303#ifdef PROC_INTERFACE
304 uchar proc; /* bit mask: what's in proc output */
305#ifdef PROC_STATISTICS
306 unsigned long cmd_cnt[8]; /* # of commands issued per target */
307 unsigned long int_cnt; /* # of interrupts serviced */
308 unsigned long disc_allowed_cnt[8]; /* # of disconnects allowed per target */
309 unsigned long disc_done_cnt[8]; /* # of disconnects done per target*/
310#endif
311#endif
312 };
313
314
315/* defines for hostdata->chip */
316
317#define C_WD33C93 0
318#define C_WD33C93A 1
319#define C_WD33C93B 2
320#define C_UNKNOWN_CHIP 100
321
322/* defines for hostdata->state */
323
324#define S_UNCONNECTED 0
325#define S_SELECTING 1
326#define S_RUNNING_LEVEL2 2
327#define S_CONNECTED 3
328#define S_PRE_TMP_DISC 4
329#define S_PRE_CMP_DISC 5
330
331/* defines for hostdata->fifo */
332
333#define FI_FIFO_UNUSED 0
334#define FI_FIFO_READING 1
335#define FI_FIFO_WRITING 2
336
337/* defines for hostdata->level2 */
338/* NOTE: only the first 3 are trustworthy at this point -
339 * having trouble when more than 1 device is reading/writing
340 * at the same time...
341 */
342
343#define L2_NONE 0 /* no combination commands - we get lots of ints */
344#define L2_SELECT 1 /* start with SEL_ATN_XFER, but never resume it */
345#define L2_BASIC 2 /* resume after STATUS ints & RDP messages */
346#define L2_DATA 3 /* resume after DATA_IN/OUT ints */
347#define L2_MOST 4 /* resume after anything except a RESELECT int */
348#define L2_RESELECT 5 /* resume after everything, including RESELECT ints */
349#define L2_ALL 6 /* always resume */
350
351/* defines for hostdata->disconnect */
352
353#define DIS_NEVER 0
354#define DIS_ADAPTIVE 1
355#define DIS_ALWAYS 2
356
357/* defines for hostdata->args */
358
359#define DB_TEST 1<<0
360#define DB_FIFO 1<<1
361#define DB_QUEUE_COMMAND 1<<2
362#define DB_EXECUTE 1<<3
363#define DB_INTR 1<<4
364#define DB_TRANSFER 1<<5
365#define DB_MASK 0x3f
366
367#define A_NO_SCSI_RESET 1<<15
368
369
370/* defines for hostdata->sync_xfer[] */
371
372#define SS_UNSET 0
373#define SS_FIRST 1
374#define SS_WAITING 2
375#define SS_SET 3
376
377/* defines for hostdata->proc */
378
379#define PR_VERSION 1<<0
380#define PR_INFO 1<<1
381#define PR_STATISTICS 1<<2
382#define PR_CONNECTED 1<<3
383#define PR_INPUTQ 1<<4
384#define PR_DISCQ 1<<5
385#define PR_TEST 1<<6
386#define PR_STOP 1<<7
387
388
389# include <linux/init.h>
390# include <linux/spinlock.h>
391# define in2000__INITFUNC(function) __initfunc(function)
392# define in2000__INIT __init
393# define in2000__INITDATA __initdata
394# define CLISPIN_LOCK(host,flags) spin_lock_irqsave(host->host_lock, flags)
395# define CLISPIN_UNLOCK(host,flags) spin_unlock_irqrestore(host->host_lock, \
396 flags)
397
Christoph Hellwigd0be4a7d2005-10-31 18:31:40 +0100398static int in2000_detect(struct scsi_host_template *) in2000__INIT;
Jeff Garzikf2812332010-11-16 02:10:29 -0500399static int in2000_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700400static int in2000_abort(Scsi_Cmnd *);
401static void in2000_setup(char *, int *) in2000__INIT;
402static int in2000_biosparam(struct scsi_device *, struct block_device *,
403 sector_t, int *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700404static int in2000_bus_reset(Scsi_Cmnd *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405
406
407#define IN2000_CAN_Q 16
408#define IN2000_SG SG_ALL
409#define IN2000_CPL 2
410#define IN2000_HOST_ID 7
411
412#endif /* IN2000_H */