blob: ac9ce6509eee78af13c014d184b27bb0f5922e64 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*------------------------------------------------------------------------
2 . smc91x.h - macros for SMSC's 91C9x/91C1xx single-chip Ethernet device.
3 .
4 . Copyright (C) 1996 by Erik Stahlman
5 . Copyright (C) 2001 Standard Microsystems Corporation
6 . Developed by Simple Network Magic Corporation
7 . Copyright (C) 2003 Monta Vista Software, Inc.
8 . Unified SMC91x driver by Nicolas Pitre
9 .
10 . This program is free software; you can redistribute it and/or modify
11 . it under the terms of the GNU General Public License as published by
12 . the Free Software Foundation; either version 2 of the License, or
13 . (at your option) any later version.
14 .
15 . This program is distributed in the hope that it will be useful,
16 . but WITHOUT ANY WARRANTY; without even the implied warranty of
17 . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 . GNU General Public License for more details.
19 .
20 . You should have received a copy of the GNU General Public License
21 . along with this program; if not, write to the Free Software
22 . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 .
24 . Information contained in this file was obtained from the LAN91C111
25 . manual from SMC. To get a copy, if you really want one, you can find
26 . information under www.smsc.com.
27 .
28 . Authors
29 . Erik Stahlman <erik@vt.edu>
30 . Daris A Nevil <dnevil@snmc.com>
31 . Nicolas Pitre <nico@cam.org>
32 .
33 ---------------------------------------------------------------------------*/
34#ifndef _SMC91X_H_
35#define _SMC91X_H_
36
37
38/*
39 * Define your architecture specific bus configuration parameters here.
40 */
41
42#if defined(CONFIG_ARCH_LUBBOCK)
43
44/* We can only do 16-bit reads and writes in the static memory space. */
45#define SMC_CAN_USE_8BIT 0
46#define SMC_CAN_USE_16BIT 1
47#define SMC_CAN_USE_32BIT 0
48#define SMC_NOWAIT 1
49
50/* The first two address lines aren't connected... */
51#define SMC_IO_SHIFT 2
52
53#define SMC_inw(a, r) readw((a) + (r))
54#define SMC_outw(v, a, r) writew(v, (a) + (r))
55#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
56#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
57
58#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
59
60/* We can only do 16-bit reads and writes in the static memory space. */
61#define SMC_CAN_USE_8BIT 0
62#define SMC_CAN_USE_16BIT 1
63#define SMC_CAN_USE_32BIT 0
64#define SMC_NOWAIT 1
65
66#define SMC_IO_SHIFT 0
67
68#define SMC_inw(a, r) in_be16((volatile u16 *)((a) + (r)))
69#define SMC_outw(v, a, r) out_be16((volatile u16 *)((a) + (r)), v)
70#define SMC_insw(a, r, p, l) \
71 do { \
72 unsigned long __port = (a) + (r); \
73 u16 *__p = (u16 *)(p); \
74 int __l = (l); \
75 insw(__port, __p, __l); \
76 while (__l > 0) { \
77 *__p = swab16(*__p); \
78 __p++; \
79 __l--; \
80 } \
81 } while (0)
82#define SMC_outsw(a, r, p, l) \
83 do { \
84 unsigned long __port = (a) + (r); \
85 u16 *__p = (u16 *)(p); \
86 int __l = (l); \
87 while (__l > 0) { \
88 /* Believe it or not, the swab isn't needed. */ \
89 outw( /* swab16 */ (*__p++), __port); \
90 __l--; \
91 } \
92 } while (0)
93#define set_irq_type(irq, type)
94
95#elif defined(CONFIG_SA1100_PLEB)
96/* We can only do 16-bit reads and writes in the static memory space. */
97#define SMC_CAN_USE_8BIT 1
98#define SMC_CAN_USE_16BIT 1
99#define SMC_CAN_USE_32BIT 0
100#define SMC_IO_SHIFT 0
101#define SMC_NOWAIT 1
102
103#define SMC_inb(a, r) inb((a) + (r))
104#define SMC_insb(a, r, p, l) insb((a) + (r), p, (l))
105#define SMC_inw(a, r) inw((a) + (r))
106#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
107#define SMC_outb(v, a, r) outb(v, (a) + (r))
108#define SMC_outsb(a, r, p, l) outsb((a) + (r), p, (l))
109#define SMC_outw(v, a, r) outw(v, (a) + (r))
110#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
111
112#define set_irq_type(irq, type) do {} while (0)
113
114#elif defined(CONFIG_SA1100_ASSABET)
115
116#include <asm/arch/neponset.h>
117
118/* We can only do 8-bit reads and writes in the static memory space. */
119#define SMC_CAN_USE_8BIT 1
120#define SMC_CAN_USE_16BIT 0
121#define SMC_CAN_USE_32BIT 0
122#define SMC_NOWAIT 1
123
124/* The first two address lines aren't connected... */
125#define SMC_IO_SHIFT 2
126
127#define SMC_inb(a, r) readb((a) + (r))
128#define SMC_outb(v, a, r) writeb(v, (a) + (r))
129#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l))
130#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
131
132#elif defined(CONFIG_ARCH_INNOKOM) || \
133 defined(CONFIG_MACH_MAINSTONE) || \
134 defined(CONFIG_ARCH_PXA_IDP) || \
135 defined(CONFIG_ARCH_RAMSES)
136
137#define SMC_CAN_USE_8BIT 1
138#define SMC_CAN_USE_16BIT 1
139#define SMC_CAN_USE_32BIT 1
140#define SMC_IO_SHIFT 0
141#define SMC_NOWAIT 1
142#define SMC_USE_PXA_DMA 1
143
144#define SMC_inb(a, r) readb((a) + (r))
145#define SMC_inw(a, r) readw((a) + (r))
146#define SMC_inl(a, r) readl((a) + (r))
147#define SMC_outb(v, a, r) writeb(v, (a) + (r))
148#define SMC_outl(v, a, r) writel(v, (a) + (r))
149#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
150#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
151
152/* We actually can't write halfwords properly if not word aligned */
153static inline void
Nicolas Pitreeb1d6982005-05-12 20:19:09 -0400154SMC_outw(u16 val, void __iomem *ioaddr, int reg)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700155{
156 if (reg & 2) {
157 unsigned int v = val << 16;
158 v |= readl(ioaddr + (reg & ~2)) & 0xffff;
159 writel(v, ioaddr + (reg & ~2));
160 } else {
161 writew(val, ioaddr + reg);
162 }
163}
164
165#elif defined(CONFIG_ARCH_OMAP)
166
167/* We can only do 16-bit reads and writes in the static memory space. */
168#define SMC_CAN_USE_8BIT 0
169#define SMC_CAN_USE_16BIT 1
170#define SMC_CAN_USE_32BIT 0
171#define SMC_IO_SHIFT 0
172#define SMC_NOWAIT 1
173
174#define SMC_inb(a, r) readb((a) + (r))
175#define SMC_outb(v, a, r) writeb(v, (a) + (r))
176#define SMC_inw(a, r) readw((a) + (r))
177#define SMC_outw(v, a, r) writew(v, (a) + (r))
178#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
179#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
180#define SMC_inl(a, r) readl((a) + (r))
181#define SMC_outl(v, a, r) writel(v, (a) + (r))
182#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
183#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
184
David Brownell5f13e7e2005-05-16 08:53:52 -0700185#include <asm/mach-types.h>
186#include <asm/arch/cpu.h>
187
188#define SMC_IRQ_TRIGGER_TYPE (( \
189 machine_is_omap_h2() \
190 || machine_is_omap_h3() \
Tony Lindgrenaf44f5b2005-06-30 06:40:18 -0700191 || (machine_is_omap_innovator() && !cpu_is_omap1510()) \
David Brownell5f13e7e2005-05-16 08:53:52 -0700192 ) ? IRQT_FALLING : IRQT_RISING)
193
194
Linus Torvalds1da177e2005-04-16 15:20:36 -0700195#elif defined(CONFIG_SH_SH4202_MICRODEV)
196
197#define SMC_CAN_USE_8BIT 0
198#define SMC_CAN_USE_16BIT 1
199#define SMC_CAN_USE_32BIT 0
200
201#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000)
202#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
203#define SMC_inl(a, r) inl((a) + (r) - 0xa0000000)
204#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
205#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
206#define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000)
207#define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l)
208#define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l)
209#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
210#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
211
212#define set_irq_type(irq, type) do {} while(0)
213
214#elif defined(CONFIG_ISA)
215
216#define SMC_CAN_USE_8BIT 1
217#define SMC_CAN_USE_16BIT 1
218#define SMC_CAN_USE_32BIT 0
219
220#define SMC_inb(a, r) inb((a) + (r))
221#define SMC_inw(a, r) inw((a) + (r))
222#define SMC_outb(v, a, r) outb(v, (a) + (r))
223#define SMC_outw(v, a, r) outw(v, (a) + (r))
224#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
225#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
226
227#elif defined(CONFIG_M32R)
228
229#define SMC_CAN_USE_8BIT 0
230#define SMC_CAN_USE_16BIT 1
231#define SMC_CAN_USE_32BIT 0
232
233#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000)
234#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
235#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
236#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
237#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
238#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
239
240#define set_irq_type(irq, type) do {} while(0)
241
242#define RPC_LSA_DEFAULT RPC_LED_TX_RX
243#define RPC_LSB_DEFAULT RPC_LED_100_10
244
245#elif defined(CONFIG_MACH_LPD7A400) || defined(CONFIG_MACH_LPD7A404)
246
247/* The LPD7A40X_IOBARRIER is necessary to overcome a mismatch between
248 * the way that the CPU handles chip selects and the way that the SMC
249 * chip expects the chip select to operate. Refer to
250 * Documentation/arm/Sharp-LH/IOBarrier for details. The read from
251 * IOBARRIER is a byte as a least-common denominator of possible
252 * regions to use as the barrier. It would be wasteful to read 32
253 * bits from a byte oriented region.
254 *
255 * There is no explicit protection against interrupts intervening
256 * between the writew and the IOBARRIER. In SMC ISR there is a
257 * preamble that performs an IOBARRIER in the extremely unlikely event
258 * that the driver interrupts itself between a writew to the chip an
259 * the IOBARRIER that follows *and* the cache is large enough that the
260 * first off-chip access while handing the interrupt is to the SMC
261 * chip. Other devices in the same address space as the SMC chip must
262 * be aware of the potential for trouble and perform a similar
263 * IOBARRIER on entry to their ISR.
264 */
265
266#include <asm/arch/constants.h> /* IOBARRIER_VIRT */
267
268#define SMC_CAN_USE_8BIT 0
269#define SMC_CAN_USE_16BIT 1
270#define SMC_CAN_USE_32BIT 0
271#define SMC_NOWAIT 0
272#define LPD7A40X_IOBARRIER readb (IOBARRIER_VIRT)
273
274#define SMC_inw(a,r) readw ((void*) ((a) + (r)))
275#define SMC_insw(a,r,p,l) readsw ((void*) ((a) + (r)), p, l)
276#define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7A40X_IOBARRIER; })
277
278static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l)
279{
280 unsigned short* ps = (unsigned short*) p;
281 while (l-- > 0) {
282 writew (*ps++, a + r);
283 LPD7A40X_IOBARRIER;
284 }
285}
286
287#define SMC_INTERRUPT_PREAMBLE LPD7A40X_IOBARRIER
288
289#define RPC_LSA_DEFAULT RPC_LED_TX_RX
290#define RPC_LSB_DEFAULT RPC_LED_100_10
291
292#else
293
294#define SMC_CAN_USE_8BIT 1
295#define SMC_CAN_USE_16BIT 1
296#define SMC_CAN_USE_32BIT 1
297#define SMC_NOWAIT 1
298
299#define SMC_inb(a, r) readb((a) + (r))
300#define SMC_inw(a, r) readw((a) + (r))
301#define SMC_inl(a, r) readl((a) + (r))
302#define SMC_outb(v, a, r) writeb(v, (a) + (r))
303#define SMC_outw(v, a, r) writew(v, (a) + (r))
304#define SMC_outl(v, a, r) writel(v, (a) + (r))
305#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
306#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
307
308#define RPC_LSA_DEFAULT RPC_LED_100_10
309#define RPC_LSB_DEFAULT RPC_LED_TX_RX
310
311#endif
312
David Brownell5f13e7e2005-05-16 08:53:52 -0700313#ifndef SMC_IRQ_TRIGGER_TYPE
314#define SMC_IRQ_TRIGGER_TYPE IRQT_RISING
315#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316
317#ifdef SMC_USE_PXA_DMA
318/*
319 * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
320 * always happening in irq context so no need to worry about races. TX is
321 * different and probably not worth it for that reason, and not as critical
322 * as RX which can overrun memory and lose packets.
323 */
324#include <linux/dma-mapping.h>
325#include <asm/dma.h>
326#include <asm/arch/pxa-regs.h>
327
328#ifdef SMC_insl
329#undef SMC_insl
330#define SMC_insl(a, r, p, l) \
331 smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l)
332static inline void
Nicolas Pitreeb1d6982005-05-12 20:19:09 -0400333smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700334 u_char *buf, int len)
335{
336 dma_addr_t dmabuf;
337
338 /* fallback if no DMA available */
339 if (dma == (unsigned char)-1) {
340 readsl(ioaddr + reg, buf, len);
341 return;
342 }
343
344 /* 64 bit alignment is required for memory to memory DMA */
345 if ((long)buf & 4) {
346 *((u32 *)buf) = SMC_inl(ioaddr, reg);
347 buf += 4;
348 len--;
349 }
350
351 len *= 4;
352 dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
353 DCSR(dma) = DCSR_NODESC;
354 DTADR(dma) = dmabuf;
355 DSADR(dma) = physaddr + reg;
356 DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
357 DCMD_WIDTH4 | (DCMD_LENGTH & len));
358 DCSR(dma) = DCSR_NODESC | DCSR_RUN;
359 while (!(DCSR(dma) & DCSR_STOPSTATE))
360 cpu_relax();
361 DCSR(dma) = 0;
362 dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
363}
364#endif
365
366#ifdef SMC_insw
367#undef SMC_insw
368#define SMC_insw(a, r, p, l) \
369 smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l)
370static inline void
Nicolas Pitreeb1d6982005-05-12 20:19:09 -0400371smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372 u_char *buf, int len)
373{
374 dma_addr_t dmabuf;
375
376 /* fallback if no DMA available */
377 if (dma == (unsigned char)-1) {
378 readsw(ioaddr + reg, buf, len);
379 return;
380 }
381
382 /* 64 bit alignment is required for memory to memory DMA */
383 while ((long)buf & 6) {
384 *((u16 *)buf) = SMC_inw(ioaddr, reg);
385 buf += 2;
386 len--;
387 }
388
389 len *= 2;
390 dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
391 DCSR(dma) = DCSR_NODESC;
392 DTADR(dma) = dmabuf;
393 DSADR(dma) = physaddr + reg;
394 DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
395 DCMD_WIDTH2 | (DCMD_LENGTH & len));
396 DCSR(dma) = DCSR_NODESC | DCSR_RUN;
397 while (!(DCSR(dma) & DCSR_STOPSTATE))
398 cpu_relax();
399 DCSR(dma) = 0;
400 dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
401}
402#endif
403
404static void
405smc_pxa_dma_irq(int dma, void *dummy, struct pt_regs *regs)
406{
407 DCSR(dma) = 0;
408}
409#endif /* SMC_USE_PXA_DMA */
410
411
412/* Because of bank switching, the LAN91x uses only 16 I/O ports */
413#ifndef SMC_IO_SHIFT
414#define SMC_IO_SHIFT 0
415#endif
416#define SMC_IO_EXTENT (16 << SMC_IO_SHIFT)
417#define SMC_DATA_EXTENT (4)
418
419/*
420 . Bank Select Register:
421 .
422 . yyyy yyyy 0000 00xx
423 . xx = bank number
424 . yyyy yyyy = 0x33, for identification purposes.
425*/
426#define BANK_SELECT (14 << SMC_IO_SHIFT)
427
428
429// Transmit Control Register
430/* BANK 0 */
431#define TCR_REG SMC_REG(0x0000, 0)
432#define TCR_ENABLE 0x0001 // When 1 we can transmit
433#define TCR_LOOP 0x0002 // Controls output pin LBK
434#define TCR_FORCOL 0x0004 // When 1 will force a collision
435#define TCR_PAD_EN 0x0080 // When 1 will pad tx frames < 64 bytes w/0
436#define TCR_NOCRC 0x0100 // When 1 will not append CRC to tx frames
437#define TCR_MON_CSN 0x0400 // When 1 tx monitors carrier
438#define TCR_FDUPLX 0x0800 // When 1 enables full duplex operation
439#define TCR_STP_SQET 0x1000 // When 1 stops tx if Signal Quality Error
440#define TCR_EPH_LOOP 0x2000 // When 1 enables EPH block loopback
441#define TCR_SWFDUP 0x8000 // When 1 enables Switched Full Duplex mode
442
443#define TCR_CLEAR 0 /* do NOTHING */
444/* the default settings for the TCR register : */
445#define TCR_DEFAULT (TCR_ENABLE | TCR_PAD_EN)
446
447
448// EPH Status Register
449/* BANK 0 */
450#define EPH_STATUS_REG SMC_REG(0x0002, 0)
451#define ES_TX_SUC 0x0001 // Last TX was successful
452#define ES_SNGL_COL 0x0002 // Single collision detected for last tx
453#define ES_MUL_COL 0x0004 // Multiple collisions detected for last tx
454#define ES_LTX_MULT 0x0008 // Last tx was a multicast
455#define ES_16COL 0x0010 // 16 Collisions Reached
456#define ES_SQET 0x0020 // Signal Quality Error Test
457#define ES_LTXBRD 0x0040 // Last tx was a broadcast
458#define ES_TXDEFR 0x0080 // Transmit Deferred
459#define ES_LATCOL 0x0200 // Late collision detected on last tx
460#define ES_LOSTCARR 0x0400 // Lost Carrier Sense
461#define ES_EXC_DEF 0x0800 // Excessive Deferral
462#define ES_CTR_ROL 0x1000 // Counter Roll Over indication
463#define ES_LINK_OK 0x4000 // Driven by inverted value of nLNK pin
464#define ES_TXUNRN 0x8000 // Tx Underrun
465
466
467// Receive Control Register
468/* BANK 0 */
469#define RCR_REG SMC_REG(0x0004, 0)
470#define RCR_RX_ABORT 0x0001 // Set if a rx frame was aborted
471#define RCR_PRMS 0x0002 // Enable promiscuous mode
472#define RCR_ALMUL 0x0004 // When set accepts all multicast frames
473#define RCR_RXEN 0x0100 // IFF this is set, we can receive packets
474#define RCR_STRIP_CRC 0x0200 // When set strips CRC from rx packets
475#define RCR_ABORT_ENB 0x0200 // When set will abort rx on collision
476#define RCR_FILT_CAR 0x0400 // When set filters leading 12 bit s of carrier
477#define RCR_SOFTRST 0x8000 // resets the chip
478
479/* the normal settings for the RCR register : */
480#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
481#define RCR_CLEAR 0x0 // set it to a base state
482
483
484// Counter Register
485/* BANK 0 */
486#define COUNTER_REG SMC_REG(0x0006, 0)
487
488
489// Memory Information Register
490/* BANK 0 */
491#define MIR_REG SMC_REG(0x0008, 0)
492
493
494// Receive/Phy Control Register
495/* BANK 0 */
496#define RPC_REG SMC_REG(0x000A, 0)
497#define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode.
498#define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode
499#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode
500#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb
501#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb
502#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect
503#define RPC_LED_RES (0x01) // LED = Reserved
504#define RPC_LED_10 (0x02) // LED = 10Mbps link detect
505#define RPC_LED_FD (0x03) // LED = Full Duplex Mode
506#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred
507#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect
508#define RPC_LED_TX (0x06) // LED = TX packet occurred
509#define RPC_LED_RX (0x07) // LED = RX packet occurred
510
511#ifndef RPC_LSA_DEFAULT
512#define RPC_LSA_DEFAULT RPC_LED_100
513#endif
514#ifndef RPC_LSB_DEFAULT
515#define RPC_LSB_DEFAULT RPC_LED_FD
516#endif
517
518#define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX)
519
520
521/* Bank 0 0x0C is reserved */
522
523// Bank Select Register
524/* All Banks */
525#define BSR_REG 0x000E
526
527
528// Configuration Reg
529/* BANK 1 */
530#define CONFIG_REG SMC_REG(0x0000, 1)
531#define CONFIG_EXT_PHY 0x0200 // 1=external MII, 0=internal Phy
532#define CONFIG_GPCNTRL 0x0400 // Inverse value drives pin nCNTRL
533#define CONFIG_NO_WAIT 0x1000 // When 1 no extra wait states on ISA bus
534#define CONFIG_EPH_POWER_EN 0x8000 // When 0 EPH is placed into low power mode.
535
536// Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low
537#define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN)
538
539
540// Base Address Register
541/* BANK 1 */
542#define BASE_REG SMC_REG(0x0002, 1)
543
544
545// Individual Address Registers
546/* BANK 1 */
547#define ADDR0_REG SMC_REG(0x0004, 1)
548#define ADDR1_REG SMC_REG(0x0006, 1)
549#define ADDR2_REG SMC_REG(0x0008, 1)
550
551
552// General Purpose Register
553/* BANK 1 */
554#define GP_REG SMC_REG(0x000A, 1)
555
556
557// Control Register
558/* BANK 1 */
559#define CTL_REG SMC_REG(0x000C, 1)
560#define CTL_RCV_BAD 0x4000 // When 1 bad CRC packets are received
561#define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically
562#define CTL_LE_ENABLE 0x0080 // When 1 enables Link Error interrupt
563#define CTL_CR_ENABLE 0x0040 // When 1 enables Counter Rollover interrupt
564#define CTL_TE_ENABLE 0x0020 // When 1 enables Transmit Error interrupt
565#define CTL_EEPROM_SELECT 0x0004 // Controls EEPROM reload & store
566#define CTL_RELOAD 0x0002 // When set reads EEPROM into registers
567#define CTL_STORE 0x0001 // When set stores registers into EEPROM
568
569
570// MMU Command Register
571/* BANK 2 */
572#define MMU_CMD_REG SMC_REG(0x0000, 2)
573#define MC_BUSY 1 // When 1 the last release has not completed
574#define MC_NOP (0<<5) // No Op
575#define MC_ALLOC (1<<5) // OR with number of 256 byte packets
576#define MC_RESET (2<<5) // Reset MMU to initial state
577#define MC_REMOVE (3<<5) // Remove the current rx packet
578#define MC_RELEASE (4<<5) // Remove and release the current rx packet
579#define MC_FREEPKT (5<<5) // Release packet in PNR register
580#define MC_ENQUEUE (6<<5) // Enqueue the packet for transmit
581#define MC_RSTTXFIFO (7<<5) // Reset the TX FIFOs
582
583
584// Packet Number Register
585/* BANK 2 */
586#define PN_REG SMC_REG(0x0002, 2)
587
588
589// Allocation Result Register
590/* BANK 2 */
591#define AR_REG SMC_REG(0x0003, 2)
592#define AR_FAILED 0x80 // Alocation Failed
593
594
595// TX FIFO Ports Register
596/* BANK 2 */
597#define TXFIFO_REG SMC_REG(0x0004, 2)
598#define TXFIFO_TEMPTY 0x80 // TX FIFO Empty
599
600// RX FIFO Ports Register
601/* BANK 2 */
602#define RXFIFO_REG SMC_REG(0x0005, 2)
603#define RXFIFO_REMPTY 0x80 // RX FIFO Empty
604
605#define FIFO_REG SMC_REG(0x0004, 2)
606
607// Pointer Register
608/* BANK 2 */
609#define PTR_REG SMC_REG(0x0006, 2)
610#define PTR_RCV 0x8000 // 1=Receive area, 0=Transmit area
611#define PTR_AUTOINC 0x4000 // Auto increment the pointer on each access
612#define PTR_READ 0x2000 // When 1 the operation is a read
613
614
615// Data Register
616/* BANK 2 */
617#define DATA_REG SMC_REG(0x0008, 2)
618
619
620// Interrupt Status/Acknowledge Register
621/* BANK 2 */
622#define INT_REG SMC_REG(0x000C, 2)
623
624
625// Interrupt Mask Register
626/* BANK 2 */
627#define IM_REG SMC_REG(0x000D, 2)
628#define IM_MDINT 0x80 // PHY MI Register 18 Interrupt
629#define IM_ERCV_INT 0x40 // Early Receive Interrupt
630#define IM_EPH_INT 0x20 // Set by Ethernet Protocol Handler section
631#define IM_RX_OVRN_INT 0x10 // Set by Receiver Overruns
632#define IM_ALLOC_INT 0x08 // Set when allocation request is completed
633#define IM_TX_EMPTY_INT 0x04 // Set if the TX FIFO goes empty
634#define IM_TX_INT 0x02 // Transmit Interrupt
635#define IM_RCV_INT 0x01 // Receive Interrupt
636
637
638// Multicast Table Registers
639/* BANK 3 */
640#define MCAST_REG1 SMC_REG(0x0000, 3)
641#define MCAST_REG2 SMC_REG(0x0002, 3)
642#define MCAST_REG3 SMC_REG(0x0004, 3)
643#define MCAST_REG4 SMC_REG(0x0006, 3)
644
645
646// Management Interface Register (MII)
647/* BANK 3 */
648#define MII_REG SMC_REG(0x0008, 3)
649#define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup
650#define MII_MDOE 0x0008 // MII Output Enable
651#define MII_MCLK 0x0004 // MII Clock, pin MDCLK
652#define MII_MDI 0x0002 // MII Input, pin MDI
653#define MII_MDO 0x0001 // MII Output, pin MDO
654
655
656// Revision Register
657/* BANK 3 */
658/* ( hi: chip id low: rev # ) */
659#define REV_REG SMC_REG(0x000A, 3)
660
661
662// Early RCV Register
663/* BANK 3 */
664/* this is NOT on SMC9192 */
665#define ERCV_REG SMC_REG(0x000C, 3)
666#define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received
667#define ERCV_THRESHOLD 0x001F // ERCV Threshold Mask
668
669
670// External Register
671/* BANK 7 */
672#define EXT_REG SMC_REG(0x0000, 7)
673
674
675#define CHIP_9192 3
676#define CHIP_9194 4
677#define CHIP_9195 5
678#define CHIP_9196 6
679#define CHIP_91100 7
680#define CHIP_91100FD 8
681#define CHIP_91111FD 9
682
683static const char * chip_ids[ 16 ] = {
684 NULL, NULL, NULL,
685 /* 3 */ "SMC91C90/91C92",
686 /* 4 */ "SMC91C94",
687 /* 5 */ "SMC91C95",
688 /* 6 */ "SMC91C96",
689 /* 7 */ "SMC91C100",
690 /* 8 */ "SMC91C100FD",
691 /* 9 */ "SMC91C11xFD",
692 NULL, NULL, NULL,
693 NULL, NULL, NULL};
694
695
696/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700697 . Receive status bits
698*/
699#define RS_ALGNERR 0x8000
700#define RS_BRODCAST 0x4000
701#define RS_BADCRC 0x2000
702#define RS_ODDFRAME 0x1000
703#define RS_TOOLONG 0x0800
704#define RS_TOOSHORT 0x0400
705#define RS_MULTICAST 0x0001
706#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
707
708
709/*
710 * PHY IDs
711 * LAN83C183 == LAN91C111 Internal PHY
712 */
713#define PHY_LAN83C183 0x0016f840
714#define PHY_LAN83C180 0x02821c50
715
716/*
717 * PHY Register Addresses (LAN91C111 Internal PHY)
718 *
719 * Generic PHY registers can be found in <linux/mii.h>
720 *
721 * These phy registers are specific to our on-board phy.
722 */
723
724// PHY Configuration Register 1
725#define PHY_CFG1_REG 0x10
726#define PHY_CFG1_LNKDIS 0x8000 // 1=Rx Link Detect Function disabled
727#define PHY_CFG1_XMTDIS 0x4000 // 1=TP Transmitter Disabled
728#define PHY_CFG1_XMTPDN 0x2000 // 1=TP Transmitter Powered Down
729#define PHY_CFG1_BYPSCR 0x0400 // 1=Bypass scrambler/descrambler
730#define PHY_CFG1_UNSCDS 0x0200 // 1=Unscramble Idle Reception Disable
731#define PHY_CFG1_EQLZR 0x0100 // 1=Rx Equalizer Disabled
732#define PHY_CFG1_CABLE 0x0080 // 1=STP(150ohm), 0=UTP(100ohm)
733#define PHY_CFG1_RLVL0 0x0040 // 1=Rx Squelch level reduced by 4.5db
734#define PHY_CFG1_TLVL_SHIFT 2 // Transmit Output Level Adjust
735#define PHY_CFG1_TLVL_MASK 0x003C
736#define PHY_CFG1_TRF_MASK 0x0003 // Transmitter Rise/Fall time
737
738
739// PHY Configuration Register 2
740#define PHY_CFG2_REG 0x11
741#define PHY_CFG2_APOLDIS 0x0020 // 1=Auto Polarity Correction disabled
742#define PHY_CFG2_JABDIS 0x0010 // 1=Jabber disabled
743#define PHY_CFG2_MREG 0x0008 // 1=Multiple register access (MII mgt)
744#define PHY_CFG2_INTMDIO 0x0004 // 1=Interrupt signaled with MDIO pulseo
745
746// PHY Status Output (and Interrupt status) Register
747#define PHY_INT_REG 0x12 // Status Output (Interrupt Status)
748#define PHY_INT_INT 0x8000 // 1=bits have changed since last read
749#define PHY_INT_LNKFAIL 0x4000 // 1=Link Not detected
750#define PHY_INT_LOSSSYNC 0x2000 // 1=Descrambler has lost sync
751#define PHY_INT_CWRD 0x1000 // 1=Invalid 4B5B code detected on rx
752#define PHY_INT_SSD 0x0800 // 1=No Start Of Stream detected on rx
753#define PHY_INT_ESD 0x0400 // 1=No End Of Stream detected on rx
754#define PHY_INT_RPOL 0x0200 // 1=Reverse Polarity detected
755#define PHY_INT_JAB 0x0100 // 1=Jabber detected
756#define PHY_INT_SPDDET 0x0080 // 1=100Base-TX mode, 0=10Base-T mode
757#define PHY_INT_DPLXDET 0x0040 // 1=Device in Full Duplex
758
759// PHY Interrupt/Status Mask Register
760#define PHY_MASK_REG 0x13 // Interrupt Mask
761// Uses the same bit definitions as PHY_INT_REG
762
763
764/*
765 * SMC91C96 ethernet config and status registers.
766 * These are in the "attribute" space.
767 */
768#define ECOR 0x8000
769#define ECOR_RESET 0x80
770#define ECOR_LEVEL_IRQ 0x40
771#define ECOR_WR_ATTRIB 0x04
772#define ECOR_ENABLE 0x01
773
774#define ECSR 0x8002
775#define ECSR_IOIS8 0x20
776#define ECSR_PWRDWN 0x04
777#define ECSR_INT 0x02
778
779#define ATTRIB_SIZE ((64*1024) << SMC_IO_SHIFT)
780
781
782/*
783 * Macros to abstract register access according to the data bus
784 * capabilities. Please use those and not the in/out primitives.
785 * Note: the following macros do *not* select the bank -- this must
786 * be done separately as needed in the main code. The SMC_REG() macro
787 * only uses the bank argument for debugging purposes (when enabled).
788 */
789
790#if SMC_DEBUG > 0
791#define SMC_REG(reg, bank) \
792 ({ \
793 int __b = SMC_CURRENT_BANK(); \
794 if (unlikely((__b & ~0xf0) != (0x3300 | bank))) { \
795 printk( "%s: bank reg screwed (0x%04x)\n", \
796 CARDNAME, __b ); \
797 BUG(); \
798 } \
799 reg<<SMC_IO_SHIFT; \
800 })
801#else
802#define SMC_REG(reg, bank) (reg<<SMC_IO_SHIFT)
803#endif
804
805#if SMC_CAN_USE_8BIT
806#define SMC_GET_PN() SMC_inb( ioaddr, PN_REG )
807#define SMC_SET_PN(x) SMC_outb( x, ioaddr, PN_REG )
808#define SMC_GET_AR() SMC_inb( ioaddr, AR_REG )
809#define SMC_GET_TXFIFO() SMC_inb( ioaddr, TXFIFO_REG )
810#define SMC_GET_RXFIFO() SMC_inb( ioaddr, RXFIFO_REG )
811#define SMC_GET_INT() SMC_inb( ioaddr, INT_REG )
812#define SMC_ACK_INT(x) SMC_outb( x, ioaddr, INT_REG )
813#define SMC_GET_INT_MASK() SMC_inb( ioaddr, IM_REG )
814#define SMC_SET_INT_MASK(x) SMC_outb( x, ioaddr, IM_REG )
815#else
816#define SMC_GET_PN() (SMC_inw( ioaddr, PN_REG ) & 0xFF)
817#define SMC_SET_PN(x) SMC_outw( x, ioaddr, PN_REG )
818#define SMC_GET_AR() (SMC_inw( ioaddr, PN_REG ) >> 8)
819#define SMC_GET_TXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) & 0xFF)
820#define SMC_GET_RXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) >> 8)
821#define SMC_GET_INT() (SMC_inw( ioaddr, INT_REG ) & 0xFF)
822#define SMC_ACK_INT(x) \
823 do { \
824 unsigned long __flags; \
825 int __mask; \
826 local_irq_save(__flags); \
827 __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \
828 SMC_outw( __mask | (x), ioaddr, INT_REG ); \
829 local_irq_restore(__flags); \
830 } while (0)
831#define SMC_GET_INT_MASK() (SMC_inw( ioaddr, INT_REG ) >> 8)
832#define SMC_SET_INT_MASK(x) SMC_outw( (x) << 8, ioaddr, INT_REG )
833#endif
834
835#define SMC_CURRENT_BANK() SMC_inw( ioaddr, BANK_SELECT )
836#define SMC_SELECT_BANK(x) SMC_outw( x, ioaddr, BANK_SELECT )
837#define SMC_GET_BASE() SMC_inw( ioaddr, BASE_REG )
838#define SMC_SET_BASE(x) SMC_outw( x, ioaddr, BASE_REG )
839#define SMC_GET_CONFIG() SMC_inw( ioaddr, CONFIG_REG )
840#define SMC_SET_CONFIG(x) SMC_outw( x, ioaddr, CONFIG_REG )
841#define SMC_GET_COUNTER() SMC_inw( ioaddr, COUNTER_REG )
842#define SMC_GET_CTL() SMC_inw( ioaddr, CTL_REG )
843#define SMC_SET_CTL(x) SMC_outw( x, ioaddr, CTL_REG )
844#define SMC_GET_MII() SMC_inw( ioaddr, MII_REG )
845#define SMC_SET_MII(x) SMC_outw( x, ioaddr, MII_REG )
846#define SMC_GET_MIR() SMC_inw( ioaddr, MIR_REG )
847#define SMC_SET_MIR(x) SMC_outw( x, ioaddr, MIR_REG )
848#define SMC_GET_MMU_CMD() SMC_inw( ioaddr, MMU_CMD_REG )
849#define SMC_SET_MMU_CMD(x) SMC_outw( x, ioaddr, MMU_CMD_REG )
850#define SMC_GET_FIFO() SMC_inw( ioaddr, FIFO_REG )
851#define SMC_GET_PTR() SMC_inw( ioaddr, PTR_REG )
852#define SMC_SET_PTR(x) SMC_outw( x, ioaddr, PTR_REG )
Nicolas Pitre8de90112005-04-12 16:21:11 -0400853#define SMC_GET_EPH_STATUS() SMC_inw( ioaddr, EPH_STATUS_REG )
Linus Torvalds1da177e2005-04-16 15:20:36 -0700854#define SMC_GET_RCR() SMC_inw( ioaddr, RCR_REG )
855#define SMC_SET_RCR(x) SMC_outw( x, ioaddr, RCR_REG )
856#define SMC_GET_REV() SMC_inw( ioaddr, REV_REG )
857#define SMC_GET_RPC() SMC_inw( ioaddr, RPC_REG )
858#define SMC_SET_RPC(x) SMC_outw( x, ioaddr, RPC_REG )
859#define SMC_GET_TCR() SMC_inw( ioaddr, TCR_REG )
860#define SMC_SET_TCR(x) SMC_outw( x, ioaddr, TCR_REG )
861
862#ifndef SMC_GET_MAC_ADDR
863#define SMC_GET_MAC_ADDR(addr) \
864 do { \
865 unsigned int __v; \
866 __v = SMC_inw( ioaddr, ADDR0_REG ); \
867 addr[0] = __v; addr[1] = __v >> 8; \
868 __v = SMC_inw( ioaddr, ADDR1_REG ); \
869 addr[2] = __v; addr[3] = __v >> 8; \
870 __v = SMC_inw( ioaddr, ADDR2_REG ); \
871 addr[4] = __v; addr[5] = __v >> 8; \
872 } while (0)
873#endif
874
875#define SMC_SET_MAC_ADDR(addr) \
876 do { \
877 SMC_outw( addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG ); \
878 SMC_outw( addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG ); \
879 SMC_outw( addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG ); \
880 } while (0)
881
882#define SMC_SET_MCAST(x) \
883 do { \
884 const unsigned char *mt = (x); \
885 SMC_outw( mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1 ); \
886 SMC_outw( mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2 ); \
887 SMC_outw( mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3 ); \
888 SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 ); \
889 } while (0)
890
891#if SMC_CAN_USE_32BIT
892/*
893 * Some setups just can't write 8 or 16 bits reliably when not aligned
894 * to a 32 bit boundary. I tell you that exists!
895 * We re-do the ones here that can be easily worked around if they can have
896 * their low parts written to 0 without adverse effects.
897 */
898#undef SMC_SELECT_BANK
899#define SMC_SELECT_BANK(x) SMC_outl( (x)<<16, ioaddr, 12<<SMC_IO_SHIFT )
900#undef SMC_SET_RPC
901#define SMC_SET_RPC(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(8, 0) )
902#undef SMC_SET_PN
903#define SMC_SET_PN(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(0, 2) )
904#undef SMC_SET_PTR
905#define SMC_SET_PTR(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(4, 2) )
906#endif
907
908#if SMC_CAN_USE_32BIT
909#define SMC_PUT_PKT_HDR(status, length) \
910 SMC_outl( (status) | (length) << 16, ioaddr, DATA_REG )
911#define SMC_GET_PKT_HDR(status, length) \
912 do { \
913 unsigned int __val = SMC_inl( ioaddr, DATA_REG ); \
914 (status) = __val & 0xffff; \
915 (length) = __val >> 16; \
916 } while (0)
917#else
918#define SMC_PUT_PKT_HDR(status, length) \
919 do { \
920 SMC_outw( status, ioaddr, DATA_REG ); \
921 SMC_outw( length, ioaddr, DATA_REG ); \
922 } while (0)
923#define SMC_GET_PKT_HDR(status, length) \
924 do { \
925 (status) = SMC_inw( ioaddr, DATA_REG ); \
926 (length) = SMC_inw( ioaddr, DATA_REG ); \
927 } while (0)
928#endif
929
930#if SMC_CAN_USE_32BIT
931#define _SMC_PUSH_DATA(p, l) \
932 do { \
933 char *__ptr = (p); \
934 int __len = (l); \
935 if (__len >= 2 && (unsigned long)__ptr & 2) { \
936 __len -= 2; \
937 SMC_outw( *(u16 *)__ptr, ioaddr, DATA_REG ); \
938 __ptr += 2; \
939 } \
940 SMC_outsl( ioaddr, DATA_REG, __ptr, __len >> 2); \
941 if (__len & 2) { \
942 __ptr += (__len & ~3); \
943 SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \
944 } \
945 } while (0)
946#define _SMC_PULL_DATA(p, l) \
947 do { \
948 char *__ptr = (p); \
949 int __len = (l); \
950 if ((unsigned long)__ptr & 2) { \
951 /* \
952 * We want 32bit alignment here. \
953 * Since some buses perform a full 32bit \
954 * fetch even for 16bit data we can't use \
955 * SMC_inw() here. Back both source (on chip \
956 * and destination) pointers of 2 bytes. \
957 */ \
958 __ptr -= 2; \
959 __len += 2; \
960 SMC_SET_PTR( 2|PTR_READ|PTR_RCV|PTR_AUTOINC ); \
961 } \
962 __len += 2; \
963 SMC_insl( ioaddr, DATA_REG, __ptr, __len >> 2); \
964 } while (0)
965#elif SMC_CAN_USE_16BIT
966#define _SMC_PUSH_DATA(p, l) SMC_outsw( ioaddr, DATA_REG, p, (l) >> 1 )
967#define _SMC_PULL_DATA(p, l) SMC_insw ( ioaddr, DATA_REG, p, (l) >> 1 )
968#elif SMC_CAN_USE_8BIT
969#define _SMC_PUSH_DATA(p, l) SMC_outsb( ioaddr, DATA_REG, p, l )
970#define _SMC_PULL_DATA(p, l) SMC_insb ( ioaddr, DATA_REG, p, l )
971#endif
972
973#if ! SMC_CAN_USE_16BIT
974#define SMC_outw(x, ioaddr, reg) \
975 do { \
976 unsigned int __val16 = (x); \
977 SMC_outb( __val16, ioaddr, reg ); \
978 SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\
979 } while (0)
980#define SMC_inw(ioaddr, reg) \
981 ({ \
982 unsigned int __val16; \
983 __val16 = SMC_inb( ioaddr, reg ); \
984 __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \
985 __val16; \
986 })
987#endif
988
viro@ZenIV.linux.org.uk4c86b112005-09-07 23:25:15 +0100989#ifdef SMC_CAN_USE_DATACS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700990#define SMC_PUSH_DATA(p, l) \
991 if ( lp->datacs ) { \
992 unsigned char *__ptr = (p); \
993 int __len = (l); \
994 if (__len >= 2 && (unsigned long)__ptr & 2) { \
995 __len -= 2; \
996 SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \
997 __ptr += 2; \
998 } \
999 outsl(lp->datacs, __ptr, __len >> 2); \
1000 if (__len & 2) { \
1001 __ptr += (__len & ~3); \
1002 SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \
1003 } \
1004 } else { \
1005 _SMC_PUSH_DATA(p, l); \
1006 }
1007
1008#define SMC_PULL_DATA(p, l) \
1009 if ( lp->datacs ) { \
1010 unsigned char *__ptr = (p); \
1011 int __len = (l); \
1012 if ((unsigned long)__ptr & 2) { \
1013 /* \
1014 * We want 32bit alignment here. \
1015 * Since some buses perform a full 32bit \
1016 * fetch even for 16bit data we can't use \
1017 * SMC_inw() here. Back both source (on chip \
1018 * and destination) pointers of 2 bytes. \
1019 */ \
1020 __ptr -= 2; \
1021 __len += 2; \
1022 SMC_SET_PTR( 2|PTR_READ|PTR_RCV|PTR_AUTOINC ); \
1023 } \
1024 __len += 2; \
1025 insl( lp->datacs, __ptr, __len >> 2); \
1026 } else { \
1027 _SMC_PULL_DATA(p, l); \
1028 }
1029#else
1030#define SMC_PUSH_DATA(p, l) _SMC_PUSH_DATA(p, l)
1031#define SMC_PULL_DATA(p, l) _SMC_PULL_DATA(p, l)
1032#endif
1033
1034#if !defined (SMC_INTERRUPT_PREAMBLE)
1035# define SMC_INTERRUPT_PREAMBLE
1036#endif
1037
1038#endif /* _SMC91X_H_ */