blob: 4f2eebf4a5603a5de81043fdefca99d13400c4cf [file] [log] [blame]
Jean-Christophe PLAGNIOL-VILLARDe91a5552013-11-15 15:50:06 +01001/*
2 * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
3 *
4 * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5 *
6 * Licensed under GPLv2.
7 */
8/dts-v1/;
9#include "at91sam9260.dtsi"
10/ {
11 model = "Calao QIL A9260";
12 compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9";
13
14 chosen {
15 bootargs = "console=ttyS0,115200";
16 };
17
18 memory {
19 reg = <0x20000000 0x4000000>;
20 };
21
22 clocks {
23 #address-cells = <1>;
24 #size-cells = <1>;
25 ranges;
26
27 main_clock: clock@0 {
28 compatible = "atmel,osc", "fixed-clock";
29 clock-frequency = <12000000>;
30 };
Alexandre Belloni32219262014-06-18 21:12:26 +020031
32 slow_xtal {
33 clock-frequency = <32768>;
34 };
35
36 main_xtal {
37 clock-frequency = <12000000>;
38 };
Jean-Christophe PLAGNIOL-VILLARDe91a5552013-11-15 15:50:06 +010039 };
40
41 ahb {
42 apb {
43 usb1: gadget@fffa4000 {
44 atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
45 status = "okay";
46 };
47
48 mmc0: mmc@fffa8000 {
49 pinctrl-0 = <
50 &pinctrl_mmc0_clk
51 &pinctrl_mmc0_slot0_cmd_dat0
52 &pinctrl_mmc0_slot0_dat1_3>;
53 status = "okay";
54 slot@0 {
55 reg = <0>;
56 bus-width = <4>;
57 };
58 };
59
60 usart0: serial@fffb0000 {
61 pinctrl-0 =
62 <&pinctrl_usart0
63 &pinctrl_usart0_rts
64 &pinctrl_usart0_cts
65 &pinctrl_usart0_dtr_dsr
66 &pinctrl_usart0_dcd
67 &pinctrl_usart0_ri>;
68 status = "okay";
69 };
70
71 usart1: serial@fffb4000 {
72 pinctrl-0 =
73 <&pinctrl_usart1
74 &pinctrl_usart1_rts
75 &pinctrl_usart1_cts>;
76 status = "okay";
77 };
78
79 usart2: serial@fffb8000 {
80 pinctrl-0 =
81 <&pinctrl_usart2
82 &pinctrl_usart2_rts
83 &pinctrl_usart2_cts>;
84 status = "okay";
85 };
86
87 macb0: ethernet@fffc4000 {
88 phy-mode = "rmii";
89 status = "okay";
90 };
91
92 spi0: spi@fffc8000 {
93 status = "okay";
94 cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>;
95
96 m41t94@0 {
97 compatible = "st,m41t94";
98 reg = <0>;
99 spi-max-frequency = <1000000>;
100 };
101
102 };
103
104 dbgu: serial@fffff200 {
105 status = "okay";
106 };
107
108 shdwc@fffffd10 {
109 atmel,wakeup-counter = <10>;
110 atmel,wakeup-rtt-timer;
111 };
112 };
113
114 usb0: ohci@00500000 {
115 num-ports = <2>;
116 status = "okay";
117 };
118
119 nand0: nand@40000000 {
120 nand-bus-width = <8>;
121 nand-ecc-mode = "soft";
122 nand-on-flash-bbt;
123 status = "okay";
124
125 at91bootstrap@0 {
126 label = "at91bootstrap";
127 reg = <0x0 0x20000>;
128 };
129
130 barebox@20000 {
131 label = "barebox";
132 reg = <0x20000 0x40000>;
133 };
134
135 bareboxenv@60000 {
136 label = "bareboxenv";
137 reg = <0x60000 0x20000>;
138 };
139
140 bareboxenv2@80000 {
141 label = "bareboxenv2";
142 reg = <0x80000 0x20000>;
143 };
144
145 oftree@a0000 {
146 label = "oftree";
147 reg = <0xa0000 0x20000>;
148 };
149
150 kernel@c0000 {
151 label = "kernel";
152 reg = <0xc0000 0x400000>;
153 };
154
155 rootfs@4c0000 {
156 label = "rootfs";
157 reg = <0x4c0000 0x7800000>;
158 };
159
160 data@7cc0000 {
161 label = "data";
162 reg = <0x7cc0000 0x8340000>;
163 };
164 };
165 };
166
167 leds {
168 compatible = "gpio-leds";
169
170 user_led {
171 label = "user_led";
172 gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
173 linux,default-trigger = "heartbeat";
174 };
175 };
176
177 gpio_keys {
178 compatible = "gpio-keys";
179 #address-cells = <1>;
180 #size-cells = <0>;
181
182 user_pb {
183 label = "user_pb";
184 gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
185 linux,code = <28>;
Sudeep Holla67ae8b92015-10-21 11:10:07 +0100186 wakeup-source;
Jean-Christophe PLAGNIOL-VILLARDe91a5552013-11-15 15:50:06 +0100187 };
188 };
189
190 i2c@0 {
191 status = "okay";
192 };
193};