blob: ae752a64d920c8efdb19dafc2d4a38dbde440c00 [file] [log] [blame]
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -08001/*
2 * Linux WiMAX
3 * RF-kill framework integration
4 *
5 *
6 * Copyright (C) 2008 Intel Corporation <linux-wimax@intel.com>
7 * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License version
11 * 2 as published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
21 * 02110-1301, USA.
22 *
23 *
24 * This integrates into the Linux Kernel rfkill susbystem so that the
25 * drivers just have to do the bare minimal work, which is providing a
26 * method to set the software RF-Kill switch and to report changes in
27 * the software and hardware switch status.
28 *
29 * A non-polled generic rfkill device is embedded into the WiMAX
30 * subsystem's representation of a device.
31 *
Johannes Berg19d337d2009-06-02 13:01:37 +020032 * FIXME: Need polled support? Let drivers provide a poll routine
33 * and hand it to rfkill ops then?
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -080034 *
35 * All device drivers have to do is after wimax_dev_init(), call
36 * wimax_report_rfkill_hw() and wimax_report_rfkill_sw() to update
37 * initial state and then every time it changes. See wimax.h:struct
38 * wimax_dev for more information.
39 *
40 * ROADMAP
41 *
42 * wimax_gnl_doit_rfkill() User space calling wimax_rfkill()
43 * wimax_rfkill() Kernel calling wimax_rfkill()
44 * __wimax_rf_toggle_radio()
45 *
Johannes Berg19d337d2009-06-02 13:01:37 +020046 * wimax_rfkill_set_radio_block() RF-Kill subsytem calling
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -080047 * __wimax_rf_toggle_radio()
48 *
49 * __wimax_rf_toggle_radio()
50 * wimax_dev->op_rfkill_sw_toggle() Driver backend
51 * __wimax_state_change()
52 *
53 * wimax_report_rfkill_sw() Driver reports state change
54 * __wimax_state_change()
55 *
56 * wimax_report_rfkill_hw() Driver reports state change
57 * __wimax_state_change()
58 *
59 * wimax_rfkill_add() Initialize/shutdown rfkill support
60 * wimax_rfkill_rm() [called by wimax_dev_add/rm()]
61 */
62
63#include <net/wimax.h>
64#include <net/genetlink.h>
65#include <linux/wimax.h>
66#include <linux/security.h>
67#include <linux/rfkill.h>
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -080068#include "wimax-internal.h"
69
70#define D_SUBMODULE op_rfkill
71#include "debug-levels.h"
72
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -080073/**
74 * wimax_report_rfkill_hw - Reports changes in the hardware RF switch
75 *
76 * @wimax_dev: WiMAX device descriptor
77 *
78 * @state: New state of the RF Kill switch. %WIMAX_RF_ON radio on,
79 * %WIMAX_RF_OFF radio off.
80 *
81 * When the device detects a change in the state of thehardware RF
82 * switch, it must call this function to let the WiMAX kernel stack
83 * know that the state has changed so it can be properly propagated.
84 *
85 * The WiMAX stack caches the state (the driver doesn't need to). As
86 * well, as the change is propagated it will come back as a request to
87 * change the software state to mirror the hardware state.
88 *
89 * If the device doesn't have a hardware kill switch, just report
90 * it on initialization as always on (%WIMAX_RF_ON, radio on).
91 */
92void wimax_report_rfkill_hw(struct wimax_dev *wimax_dev,
93 enum wimax_rf_state state)
94{
95 int result;
96 struct device *dev = wimax_dev_to_dev(wimax_dev);
97 enum wimax_st wimax_state;
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -080098
99 d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
100 BUG_ON(state == WIMAX_RF_QUERY);
101 BUG_ON(state != WIMAX_RF_ON && state != WIMAX_RF_OFF);
102
103 mutex_lock(&wimax_dev->mutex);
104 result = wimax_dev_is_ready(wimax_dev);
105 if (result < 0)
106 goto error_not_ready;
107
108 if (state != wimax_dev->rf_hw) {
109 wimax_dev->rf_hw = state;
Joe Perchesf64f9e72009-11-29 16:55:45 -0800110 if (wimax_dev->rf_hw == WIMAX_RF_ON &&
111 wimax_dev->rf_sw == WIMAX_RF_ON)
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800112 wimax_state = WIMAX_ST_READY;
113 else
114 wimax_state = WIMAX_ST_RADIO_OFF;
Johannes Berg19d337d2009-06-02 13:01:37 +0200115
Inaky Perez-Gonzalezd2f4c102009-06-11 11:12:48 -0700116 result = rfkill_set_hw_state(wimax_dev->rfkill,
117 state == WIMAX_RF_OFF);
Johannes Berg19d337d2009-06-02 13:01:37 +0200118
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800119 __wimax_state_change(wimax_dev, wimax_state);
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800120 }
121error_not_ready:
122 mutex_unlock(&wimax_dev->mutex);
123 d_fnend(3, dev, "(wimax_dev %p state %u) = void [%d]\n",
124 wimax_dev, state, result);
125}
126EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw);
127
128
129/**
130 * wimax_report_rfkill_sw - Reports changes in the software RF switch
131 *
132 * @wimax_dev: WiMAX device descriptor
133 *
134 * @state: New state of the RF kill switch. %WIMAX_RF_ON radio on,
135 * %WIMAX_RF_OFF radio off.
136 *
137 * Reports changes in the software RF switch state to the the WiMAX
138 * stack.
139 *
140 * The main use is during initialization, so the driver can query the
141 * device for its current software radio kill switch state and feed it
142 * to the system.
143 *
144 * On the side, the device does not change the software state by
145 * itself. In practice, this can happen, as the device might decide to
146 * switch (in software) the radio off for different reasons.
147 */
148void wimax_report_rfkill_sw(struct wimax_dev *wimax_dev,
149 enum wimax_rf_state state)
150{
151 int result;
152 struct device *dev = wimax_dev_to_dev(wimax_dev);
153 enum wimax_st wimax_state;
154
155 d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
156 BUG_ON(state == WIMAX_RF_QUERY);
157 BUG_ON(state != WIMAX_RF_ON && state != WIMAX_RF_OFF);
158
159 mutex_lock(&wimax_dev->mutex);
160 result = wimax_dev_is_ready(wimax_dev);
161 if (result < 0)
162 goto error_not_ready;
163
164 if (state != wimax_dev->rf_sw) {
165 wimax_dev->rf_sw = state;
Joe Perchesf64f9e72009-11-29 16:55:45 -0800166 if (wimax_dev->rf_hw == WIMAX_RF_ON &&
167 wimax_dev->rf_sw == WIMAX_RF_ON)
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800168 wimax_state = WIMAX_ST_READY;
169 else
170 wimax_state = WIMAX_ST_RADIO_OFF;
171 __wimax_state_change(wimax_dev, wimax_state);
Johannes Berg19d337d2009-06-02 13:01:37 +0200172 rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF);
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800173 }
174error_not_ready:
175 mutex_unlock(&wimax_dev->mutex);
176 d_fnend(3, dev, "(wimax_dev %p state %u) = void [%d]\n",
177 wimax_dev, state, result);
178}
179EXPORT_SYMBOL_GPL(wimax_report_rfkill_sw);
180
181
182/*
183 * Callback for the RF Kill toggle operation
184 *
185 * This function is called by:
186 *
187 * - The rfkill subsystem when the RF-Kill key is pressed in the
188 * hardware and the driver notifies through
189 * wimax_report_rfkill_hw(). The rfkill subsystem ends up calling back
190 * here so the software RF Kill switch state is changed to reflect
191 * the hardware switch state.
192 *
193 * - When the user sets the state through sysfs' rfkill/state file
194 *
195 * - When the user calls wimax_rfkill().
196 *
197 * This call blocks!
198 *
199 * WARNING! When we call rfkill_unregister(), this will be called with
200 * state 0!
201 *
202 * WARNING: wimax_dev must be locked
203 */
204static
205int __wimax_rf_toggle_radio(struct wimax_dev *wimax_dev,
206 enum wimax_rf_state state)
207{
208 int result = 0;
209 struct device *dev = wimax_dev_to_dev(wimax_dev);
210 enum wimax_st wimax_state;
211
212 might_sleep();
213 d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
214 if (wimax_dev->rf_sw == state)
215 goto out_no_change;
216 if (wimax_dev->op_rfkill_sw_toggle != NULL)
217 result = wimax_dev->op_rfkill_sw_toggle(wimax_dev, state);
218 else if (state == WIMAX_RF_OFF) /* No op? can't turn off */
219 result = -ENXIO;
220 else /* No op? can turn on */
221 result = 0; /* should never happen tho */
222 if (result >= 0) {
223 result = 0;
224 wimax_dev->rf_sw = state;
225 wimax_state = state == WIMAX_RF_ON ?
226 WIMAX_ST_READY : WIMAX_ST_RADIO_OFF;
227 __wimax_state_change(wimax_dev, wimax_state);
228 }
229out_no_change:
230 d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n",
231 wimax_dev, state, result);
232 return result;
233}
234
235
236/*
237 * Translate from rfkill state to wimax state
238 *
239 * NOTE: Special state handling rules here
240 *
241 * Just pretend the call didn't happen if we are in a state where
242 * we know for sure it cannot be handled (WIMAX_ST_DOWN or
243 * __WIMAX_ST_QUIESCING). rfkill() needs it to register and
244 * unregister, as it will run this path.
245 *
246 * NOTE: This call will block until the operation is completed.
247 */
Johannes Berg19d337d2009-06-02 13:01:37 +0200248static int wimax_rfkill_set_radio_block(void *data, bool blocked)
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800249{
250 int result;
251 struct wimax_dev *wimax_dev = data;
252 struct device *dev = wimax_dev_to_dev(wimax_dev);
253 enum wimax_rf_state rf_state;
254
Johannes Berg19d337d2009-06-02 13:01:37 +0200255 d_fnstart(3, dev, "(wimax_dev %p blocked %u)\n", wimax_dev, blocked);
256 rf_state = WIMAX_RF_ON;
257 if (blocked)
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800258 rf_state = WIMAX_RF_OFF;
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800259 mutex_lock(&wimax_dev->mutex);
260 if (wimax_dev->state <= __WIMAX_ST_QUIESCING)
Johannes Berg19d337d2009-06-02 13:01:37 +0200261 result = 0;
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800262 else
263 result = __wimax_rf_toggle_radio(wimax_dev, rf_state);
264 mutex_unlock(&wimax_dev->mutex);
Johannes Berg19d337d2009-06-02 13:01:37 +0200265 d_fnend(3, dev, "(wimax_dev %p blocked %u) = %d\n",
266 wimax_dev, blocked, result);
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800267 return result;
268}
269
Johannes Berg19d337d2009-06-02 13:01:37 +0200270static const struct rfkill_ops wimax_rfkill_ops = {
271 .set_block = wimax_rfkill_set_radio_block,
272};
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800273
274/**
275 * wimax_rfkill - Set the software RF switch state for a WiMAX device
276 *
277 * @wimax_dev: WiMAX device descriptor
278 *
279 * @state: New RF state.
280 *
281 * Returns:
282 *
283 * >= 0 toggle state if ok, < 0 errno code on error. The toggle state
284 * is returned as a bitmap, bit 0 being the hardware RF state, bit 1
285 * the software RF state.
286 *
287 * 0 means disabled (%WIMAX_RF_ON, radio on), 1 means enabled radio
288 * off (%WIMAX_RF_OFF).
289 *
290 * Description:
291 *
292 * Called by the user when he wants to request the WiMAX radio to be
293 * switched on (%WIMAX_RF_ON) or off (%WIMAX_RF_OFF). With
294 * %WIMAX_RF_QUERY, just the current state is returned.
295 *
296 * NOTE:
297 *
298 * This call will block until the operation is complete.
299 */
300int wimax_rfkill(struct wimax_dev *wimax_dev, enum wimax_rf_state state)
301{
302 int result;
303 struct device *dev = wimax_dev_to_dev(wimax_dev);
304
305 d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
306 mutex_lock(&wimax_dev->mutex);
307 result = wimax_dev_is_ready(wimax_dev);
Inaky Perez-Gonzalez81d3f902009-10-03 16:51:02 +0900308 if (result < 0) {
309 /* While initializing, < 1.4.3 wimax-tools versions use
310 * this call to check if the device is a valid WiMAX
311 * device; so we allow it to proceed always,
312 * considering the radios are all off. */
313 if (result == -ENOMEDIUM && state == WIMAX_RF_QUERY)
314 result = WIMAX_RF_OFF << 1 | WIMAX_RF_OFF;
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800315 goto error_not_ready;
Inaky Perez-Gonzalez81d3f902009-10-03 16:51:02 +0900316 }
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800317 switch (state) {
318 case WIMAX_RF_ON:
319 case WIMAX_RF_OFF:
320 result = __wimax_rf_toggle_radio(wimax_dev, state);
321 if (result < 0)
322 goto error;
Johannes Berg19d337d2009-06-02 13:01:37 +0200323 rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF);
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800324 break;
325 case WIMAX_RF_QUERY:
326 break;
327 default:
328 result = -EINVAL;
329 goto error;
330 }
331 result = wimax_dev->rf_sw << 1 | wimax_dev->rf_hw;
332error:
333error_not_ready:
334 mutex_unlock(&wimax_dev->mutex);
335 d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n",
336 wimax_dev, state, result);
337 return result;
338}
339EXPORT_SYMBOL(wimax_rfkill);
340
341
342/*
343 * Register a new WiMAX device's RF Kill support
344 *
345 * WARNING: wimax_dev->mutex must be unlocked
346 */
347int wimax_rfkill_add(struct wimax_dev *wimax_dev)
348{
349 int result;
350 struct rfkill *rfkill;
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800351 struct device *dev = wimax_dev_to_dev(wimax_dev);
352
353 d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
354 /* Initialize RF Kill */
355 result = -ENOMEM;
Johannes Berg19d337d2009-06-02 13:01:37 +0200356 rfkill = rfkill_alloc(wimax_dev->name, dev, RFKILL_TYPE_WIMAX,
357 &wimax_rfkill_ops, wimax_dev);
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800358 if (rfkill == NULL)
359 goto error_rfkill_allocate;
Johannes Berg19d337d2009-06-02 13:01:37 +0200360
361 d_printf(1, dev, "rfkill %p\n", rfkill);
362
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800363 wimax_dev->rfkill = rfkill;
364
Inaky Perez-Gonzalezc29eaf32009-08-27 17:54:53 -0700365 rfkill_init_sw_state(rfkill, 1);
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800366 result = rfkill_register(wimax_dev->rfkill);
367 if (result < 0)
368 goto error_rfkill_register;
369
370 /* If there is no SW toggle op, SW RFKill is always on */
371 if (wimax_dev->op_rfkill_sw_toggle == NULL)
372 wimax_dev->rf_sw = WIMAX_RF_ON;
373
374 d_fnend(3, dev, "(wimax_dev %p) = 0\n", wimax_dev);
375 return 0;
376
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800377error_rfkill_register:
Johannes Berg19d337d2009-06-02 13:01:37 +0200378 rfkill_destroy(wimax_dev->rfkill);
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800379error_rfkill_allocate:
380 d_fnend(3, dev, "(wimax_dev %p) = %d\n", wimax_dev, result);
381 return result;
382}
383
384
385/*
386 * Deregister a WiMAX device's RF Kill support
387 *
388 * Ick, we can't call rfkill_free() after rfkill_unregister()...oh
389 * well.
390 *
391 * WARNING: wimax_dev->mutex must be unlocked
392 */
393void wimax_rfkill_rm(struct wimax_dev *wimax_dev)
394{
395 struct device *dev = wimax_dev_to_dev(wimax_dev);
396 d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
Johannes Berg19d337d2009-06-02 13:01:37 +0200397 rfkill_unregister(wimax_dev->rfkill);
398 rfkill_destroy(wimax_dev->rfkill);
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800399 d_fnend(3, dev, "(wimax_dev %p)\n", wimax_dev);
400}
401
402
Inaky Perez-Gonzalez3e656462008-12-20 16:57:38 -0800403/*
404 * Exporting to user space over generic netlink
405 *
406 * Parse the rfkill command from user space, return a combination
407 * value that describe the states of the different toggles.
408 *
409 * Only one attribute: the new state requested (on, off or no change,
410 * just query).
411 */
412
413static const
414struct nla_policy wimax_gnl_rfkill_policy[WIMAX_GNL_ATTR_MAX + 1] = {
415 [WIMAX_GNL_RFKILL_IFIDX] = {
416 .type = NLA_U32,
417 },
418 [WIMAX_GNL_RFKILL_STATE] = {
419 .type = NLA_U32 /* enum wimax_rf_state */
420 },
421};
422
423
424static
425int wimax_gnl_doit_rfkill(struct sk_buff *skb, struct genl_info *info)
426{
427 int result, ifindex;
428 struct wimax_dev *wimax_dev;
429 struct device *dev;
430 enum wimax_rf_state new_state;
431
432 d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
433 result = -ENODEV;
434 if (info->attrs[WIMAX_GNL_RFKILL_IFIDX] == NULL) {
435 printk(KERN_ERR "WIMAX_GNL_OP_RFKILL: can't find IFIDX "
436 "attribute\n");
437 goto error_no_wimax_dev;
438 }
439 ifindex = nla_get_u32(info->attrs[WIMAX_GNL_RFKILL_IFIDX]);
440 wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
441 if (wimax_dev == NULL)
442 goto error_no_wimax_dev;
443 dev = wimax_dev_to_dev(wimax_dev);
444 result = -EINVAL;
445 if (info->attrs[WIMAX_GNL_RFKILL_STATE] == NULL) {
446 dev_err(dev, "WIMAX_GNL_RFKILL: can't find RFKILL_STATE "
447 "attribute\n");
448 goto error_no_pid;
449 }
450 new_state = nla_get_u32(info->attrs[WIMAX_GNL_RFKILL_STATE]);
451
452 /* Execute the operation and send the result back to user space */
453 result = wimax_rfkill(wimax_dev, new_state);
454error_no_pid:
455 dev_put(wimax_dev->net_dev);
456error_no_wimax_dev:
457 d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
458 return result;
459}
460
461
462struct genl_ops wimax_gnl_rfkill = {
463 .cmd = WIMAX_GNL_OP_RFKILL,
464 .flags = GENL_ADMIN_PERM,
465 .policy = wimax_gnl_rfkill_policy,
466 .doit = wimax_gnl_doit_rfkill,
467 .dumpit = NULL,
468};
469